Microphones
The Best
DELOCK 66582 - condenser directional microphone, Smartphones and DSLR Cameras
51.24 EUR
This professional condenser directional microphone by Delock can be used for high-quality voice and vocal recordings.Optimal recordings
The microphone has a supercardioid polar pattern and therefore captures the sound ideally. Due to its high power, low self-noise and precise performance, even the finest sounds are recorded crystal clear. Annoying background noises are minimized.
Good windscreen
Due to the included windscreen, the recording quality is further optimized. Disturbing wind noises are optimally filtered.
High compatibility
With its 3.5 mm 4 pin stereo jack male, the microphone is compatible with various smartphones. Due to the included 3.5 mm TRS female adapter, the microphone can also be connected to various DSLR cameras and computers. With the hot shoe adapter, the microphone can be mounted on an accessory shoe of cameras.
No batteries required
The microphone is passive and therefore does not need batteries. This eliminates the need to change batteries.
Stable & non-slip stand
The metal stand with rubber feet ensures that the microphone stands firmly on the table. The adjustable smartphone clamp ensures a smooth recording. The rubberized clamps prevent smartphones from being scratched. The flexible smartphone clamp holds devices with a width of up to 8.5 cm. The ball joint can be rotated by 360° and locked in place. The table stand can be easily unscrewed and folded up when needed.
Specification
- Connector: 1 x 3.5 mm 4 pin stereo jack female
- Coiled Cable: 1 x 3.5 mm 4 pin audio stereo jack male > 1 x 3.5 mm 4 pin audio stereo jack male
- Adapter: 1 x 3.5 mm 4 pin stereo jack female > 1 x 3.5 mm 3 pin stereo jack male (TRRS to TRS)
- Directivity: supercardioid
- Sensitivity: -23 dB +/- 3 dB
- Frequency range: 20 Hz - 12 kHz
- Signal-to-noise ratio (SNR): ca. 70 dB
- Sound pressure level (SPL): max. 110 dB
- Metal stand: Ø ca. 180 mm
- Microphone length: ca. 150 mm
- Smartphone clamp: width up to 8.5 cm
- Hot shoe adapter for mounting on cameras with accessory shoe
System requirements
- A free stereo port 3.5 mm
Package content
- Microphone
- Stereo jack adapter
- Coiled cable, length ca. 10 cm - 60 cm
- Table stand
- Flexible smartphone clamp
- Windscreen
- User manual
Top Pick
CHERRY JA-0720 - Microphone, USB-C, with RGB illumination
124.68 EUR
USB microphone for streaming and gaming with impressive RGB illumination- Elegant matt copper design
- Stylish three-legged stand made of solid metal with integrated vibration damper
- Versatile thanks to four different directional characteristics: Cardioid, omnidirectional, bidirectional and stereo
- Impressive RGB illumination for an intense gaming or streaming setup
- Gain controller for adjusting the microphone sensitivity
- Compatible with PC, Mac, PS4 and PS5 (plug & play via USB cable)
- Convenient touch-to-mute function
- Headphone jack with integrated volume control in CHERRY design
- Shock mount for superior sound quality without unwanted noise or vibration
The CHERRY UM 9.0 PRO RGB not only impresses with its three-legged stand made of solid metal, which ensures stability, but is also visually striking. Matt black meets stylish copper, which makes this professional USB microphone stand out.
Included in delivery
- Microphone
- USB cable
- User manual
Excellent
DELOCK 66279 - Tie Lavalier Microphone Omnidirectional with Clip 3.5 mm
33.67 EUR
This tie lavalier microphone by Delock is designed for mobile use and hands-free recording.With clip to attach
It can easily be clipped to a tie or collar.
Optimal recordings
The omnidirectional polar pattern captures the sound optimally and achieves a high recording quality. This makes it ideal for skyping, interviews, voice recordings, etc.
Multifunctional application
It can be connected to any PC or laptop via the 3 pin stereo jack connector. The 4 pin Y-adapter included in the delivery also allows connection to a tablet or smartphone.
Specification
• Connector:
1 x 3.5 mm 3 pin stereo jack male
• Y-Adapter:
1 x 3.5 mm 4 pin stereo jack male (CTIA standard) >
1 x 3.5 mm 3 pin stereo jack female microphone
1 x 3.5 mm 3 pin stereo jack female headset
• Directivity: omnidirectional
• Impedance: 2.2 kOhm
• Sensitivity: -30 dB +/- 3 dB
• Frequency range: 50 Hz - 16 kHz
• Housing material: metal
• Weight: ca. 15.5 g
• Cable length: ca. 1.8 m
System requirements
• A free stereo port 3.5 mm
Package content
• Microphone
• Clip
• Y-Adapter
• Windscreen
• Storage bag
Package
• Retail Box
Recommended
DELOCK 66499 - Microphone, USB, with Gooseneck
33.67 EUR
This USB microphone by Delock can be used for voice and vocal transmissions.Optimal recordings
The microphone has a cardioid polar pattern (unidirectional) and captures the sound ideally. Due to a high power, low self-noise and precise performance, even the finest sounds are optimally recorded.
Mute button & LED ring
With the mute button in the middle of the microphone, the microphone can be quickly muted. The LED ring signals operational status with a blue or red light.
Flexible gooseneck
With the gooseneck, the microphone can be bent in the preferred direction.
Plug & Play
Due to USB Plug & Play the microphone is ready to use immediately, no driver installation is needed. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux.
Specification
- Connector: 1 x USB 2.0 Type-A male
- Directivity: unidirectional
- Sensitivity: -35 dB +/- 3 dB
- Frequency range: 70 Hz - 15 kHz
- Sample rate: 16 Bit / 48 kHz
- Mute-Button
- Gooseneck, length ca. 7 cm
- Status LED
- Dimensions (LxWxH): ca. 196 x 23 x 23 mm
- USB bus powered
- Plug & Play
System requirements
- Chrome OS
- Linux Kernel 3.3 or above
- Mac OS 10.9 or above
- Windows 8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Featured
DELOCK 65872 - Microphone for smartphone/tablet, 3.5-mm jack, white
26.44 EUR
This microphone by Delock is suitable for mobile use with a smartphone or tablet and can be used for voice and vocal transmissions. The rubberised base provides a non-slip stand and the microphone can be turned in any direction by using the gooseneck. The microphone also has a 3.5-mm stereo jack female port, meaning that headphones can be used at the same time.Specifications
- Connections:
1x 3.5-mm 4-pin jack (male)
1 x 3.5-mm 3-pin jack socket - Directional pattern: omnidirectional
- Impedance: 2.2 kOhm
- Sensitivity: -32 dB +/- 3 dB
- Frequency range: 100 Hz - 13 kHz
- Dimensions: (L x W x H): approx. 55 x 64 x 143 mm
- Weight: approx. 88 g
- Cable length: approx. 1.7 m
Alternative
DELOCK 66640 - Microphone, XLR connector / 3 pin stereo jack male, adapter cabl
46.08 EUR
Professional Computer Podcasting Microphone with XLR connector and 3 pin stereo jack male + adapter cable for Smartphone and TabletThis professional condenser microphone by Delock can be used for high-quality voice and vocal recordings.
Optimal recordings
The microphone has a high-quality 16 mm condenser chip and a cardioid polar pattern (unidirectional) and therefore ideally captures the sound. Due to high power, low self-noise and precise performance, even the finest sounds are recorded crystal clear.
Good windscreen
Due to the included windscreen, the recording quality is further optimized. Disturbing wind noises are optimally filtered.
Multifunctional application
It can be connected to any PC or laptop via the detachable XLR to 3 pin stero jack cable. With the included 4 pin Y-adapter cable, it can also be connected to a tablet or smartphone.
Stable & non-slip stand
The metal stand with rubber feet ensures that the microphone stands stable on the table. The microphone holder can be adjusted in a 180° angle as required. The table stand can be easily folded and transported when needed.
Specification
- Connector: 1 x XLR plug
- Cable:
1 x XLR jack >
1 x 3.5 mm 3 pin stereo jack male - Y-Adapter:
1 x 3.5 mm 4 pin stereo jack male (CTIA standard) >
1 x 3.5 mm 3 pin stereo jack female microphone
1 x 3.5 mm 3 pin stereo jack female headset - Directivity: unidirectional
- Sensitivity: -38 dB +/- 3 dB
- Frequency range: 30 Hz - 16 kHz
- Signal-to-noise ratio (SNR): ca. 70 dB
- Self-Noise: max. 16 dBA
- Sound pressure level (SPL): max. 120 dB
- Cable length: ca. 2.5 m
- Colour: black
- Voltage: 1.5 V
System requirements
- a free stereo port 3.5 mm
Package content
- XLR microphone
- XLR to stereo jack cable
- Y-adapter cable
- Windscreen
- Microphone holder
- Table stand
Package
- Retail Box
RØDE RODE NTUSB MINI - USB condenser microphone
113.26 EUR
STUDIO-QUALITY USB MICROPHONE- High-quality condenser capsule that delivers warmth and presence for a clear, professional sound.
- Directional cardioid pickup pattern optimised to reduce room sound and other extraneous noise.
- Smooth frequency response that sounds incredible in a wide variety of applications.
- In-built pop filter for reducing plosives.
- Unique detachable magnetic desk stand to mitigate knocks and bumps and is easy to remove.
- Integrated 360-degree swing mount for quick and easy positioning on a desktop, mic stand, or studio arm.
- Studio-grade headphone amplifier with precision level control and switchable zero-latency monitoring for eliminating distracting echo.
- Class-compliant USB output that works seamlessly with computers and tablets, simple to use – just plug in and hit record.
The NT-USB Mini brings the pristine sound quality of RØDE’s world-class studio mics to a compact, easy-to-use desktop USB microphone. Designed to deliver crystal-clear, professional-sounding audio direct to a computer or tablet, it’s the perfect microphone for gamers, podcasters, musicians, streamers, business professionals and content creators who want to be heard in full definition.
The NT-USB Mini features a studio-grade headphone amplifier and a high-quality 3.5mm headphone output, complete with precision volume control, allowing you to easily monitor your audio. There is also a switchable zero-latency monitoring mode for eliminating distracting echo when tracking vocals or recording instruments. It is incredibly easy to set up and use, with simple controls, an in-built pop filter and a class-compliant USB output that works seamlessly with computers or tablets, no drivers or software needed. Just plug into your Mac, PC or tablet with the included USB cable and hit record.
The NT-USB Mini features a unique detachable magnetic desk stand – not only does this provide a sturdy base on any desktop, it also makes it easy to remove and attach to a mic stand or studio arm. This and the unique 360-degree swing mount means you can position the mic wherever it needs to be to get the best recording possible.
The NT-USB Mini is the perfect addition to any desktop or home studio setup. At just 89mm wide and 141mm tall, it’s very compact, taking up only a fraction of precious desktop real estate. It also looks fantastic – sleek and stylish, with clean lines and a modern aesthetic. Hard-wearing steel and reinforced nylon resin construction ensure the NT-USB Mini is ready to take on the rigours of recording anywhere and everywhere.
DELOCK 65871 - USB Microphone, base, Mute Button
46.08 EUR
This USB microphone by Delock can be used for voice and vocal transmissions. The rubberized base provides a non-slip stand and the gooseneck allows the microphone to bend in the ideal direction. The LED ring and the green LED indicate operability and mute activation or deactivation by means of blue or red light. The Mute button mutes the microphone and the ON button switches it on and off.Specification
- Connector: 1 x USB 2.0 Type-A reversible male
- Directivity: uni-directional
- Sensitivity: -44 dB +/- 3 dB
- Frequency range: 70 Hz - 9 kHz
- Sample rate: 16 Bit / 48 kHz
- Function key: 1 x On / Off switch, 1 x mute switch
- Gooseneck, length ca. 25 cm
- Status LED
- Rubber Base
- Colour: black
- Cable length: ca. 1.7 m
- Dimensions (LxWxH): ca. 120 x 85 x 320 mm
- USB bus powered
- Plug & Play
System requirements
- Windows 7/7-64/8.1/8.1-64/10/10-64, ex Linux Kernel 3.3, ex Mac OS 10.9
- PC or laptop with a free USB Type-A port
Package content
- USB microphone
- User manual
Package
- Retail Box
DELOCK 65868 - USB Microphone, base, Touch-Mute Button
38.84 EUR
This USB microphone by Delock can be used for voice and vocal transmissions. The rubberized base provides a non-slip stand and the gooseneck allows the microphone to bend in the ideal direction. The LED ring indicates that the microphone is ready for operation by means of a blue or red light and the touch mute button can be used to mute the microphone.Specification
- Connector: 1 x USB 2.0 Type-A reversible male
- Sensitivity: -37 dB +/- 3 dB
- Frequency range: 70 Hz - 15 kHz
- Impedance: 2.2 kOhm +/- 30% at 1 kHz
- Sample rate: 16 Bit / 48 kHz
- Touch Mute-Button
- Gooseneck
- Status LED
- Rubber Base
- Colour: black
- Cable length: ca. 1.7 m
- Dimensions (LxWxH): ca. 140 x 60 x 60 mm
- USB bus powered
- Plug & Play
System requirements
- Windows 7/7-64/8.1/8.1-64/10/10-64, Linux ex Kernel 3.3 / Kernel 4.9.x, Mac ex OS 10.9
- PC or laptop with a free USB Type-A port
Package content
- USB-microphone
- User manual
DELOCK 66331 - USB Condenser Microphone Set - for Podcasting, Gaming and Vocals
48.14 EUR
This USB condenser microphone by Delock can be used for high-quality voice and vocal recordings.Optimal recordings
The microphone has a cardioid polar pattern (unidirectional) and captures the sound ideally. Due to a high power, low self-noise and precise performance, even the finest sounds are optimally recorded.
Dual Layer Pop Filter & Windscreen
Due to the included dual layer pop filter and the windscreen, the recording quality is further optimized. Annoying wind noises are optimally filtered.
Plug & Play
Due to USB Plug & Play the microphone is ready to use immediately, no driver installation is needed. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux.
Stable & non-slip stand
The metal base with rubber feet ensures that the microphone stands stable on the table. The shock mount (spider) ensures vibration-free recording. The table stand can be folded and transported easily if required.
Specification
- Connector: 1 x USB 2.0 Type-A male
- Directivity: unidirectional
- Sensitivity: -47 dB +/- 3 dB
- Frequency range: 20 Hz - 20 kHz
- Sample rate: 16 Bit / 44.1 kHz
- Signal-to-noise ratio (SNR): ca. 60 dB
- Impedance: 2.2 kOhm
- Cable length: ca. 1.5 m
- Colour: black
- Dimensions (LxWxH): ca. 150 x 45 x 35 mm
- USB bus powered
- Plug & Play
System requirements
- Chrome OS
- Linux Kernel 4.4 or above
- Mac OS 10.9 or above
- Windows 7/7-64/8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Package content
- USB microphone
- Table stand
- Shock mount (spider)
- Pop filter
- Windscreen
- User manual
DELOCK 66300 - USB Condenser Microphone Set
76.05 EUR
This professional USB condenser microphone by Delock can be used for high-quality voice and vocal recordings.Optimal recordings
The microphone has a 16 mm condenser and a cardioid polar pattern (unidirectional) and therefore ideally captures the sound. Due to high power, low self-noise and precise performance, even the finest sounds are recorded crystal clear.
Dual Layer Pop Filter & Windscreen
Due to the included dual layer pop filter and the windscreen, the recording quality is further optimized. Annoying wind noises are optimally filtered.
High sampling rate
Typical USB microphones work with 16 Bit and 44 KHz. The Delock microphone offers a sampling rate of 24 Bit and 192 kHz, so it is possible to record in Hi-Fi studio quality.
Plug & Play
Due to USB Plug & Play the microphone is ready to use immediately, no driver installation is needed. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux.
Stable & adjustable stand
The stand ensures that the microphone is stable on the table. With the telescopic function, the microphone can be adjusted to the preferred height.
Specification
- Connector: 1 x USB 2.0 Type-B female
- Directivity: unidirectional
- Sensitivity: -38 dB +/- 3 dB
- Frequency range: 30 Hz - 16 kHz
- Sample rate: 24 Bit / 192 kHz
- Signal-to-noise ratio (SNR): ca. 70 dB
- Self-Noise: max. 16 dBA
- Sound pressure level (SPL): max. 120 dB
- Dual-Layer pop filter: Ø 120 mm
- Stand: Ø ca. 130 mm (ca. 600 g)
- USB bus powered
- Plug & Play
System requirements
- Chrome OS
- Linux Kernel 4.4 or above
- Mac OS 10.9 or above
- Windows 7/7-64/8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Package content
- USB microphone
- USB 2.0 Type-A to USB 2.0 Type-B cable, length ca. 2.5 m
- Shock mount (spider)
- Telescopic rod
- Stand
- Pop filter
- Windscreen
- User manual
THRONMAX M4 - Microphone, MDrill Zero, 48 kHz, black
66.75 EUR
The MDrill Zero not only stands out thanks to its appearance, it also has a lot of technical features on offer. Whether for streamers, gamers or musicians, the M4 with its 2 capacitor capsules and 2 recording patterns offers everything to ensure that your recordings get a particularly clear and full sound. For easy and uncomplicated handling, the MDrill Zero has a knob for volume and directivity characteristics and can be mounted on almost all standard microphone stands thanks to its microphone holder with universal thread.- HD, studio-quality recordings.
- Patented Vertigain technology. Recorded sounds are up to 10% clearer than with conventional microphones
- Colour: black
- Sample rate: 48 kHz, 16 bit recording
- Frequency: 20 Hz - 20 kHz
- 2 directivity characteristics: kidney-shaped (for streaming and for gamers), 360° omnidirectional (conference calls and events)
- Port 1: 3.5 mm aux-in
- Port 2: USB-C (including 2m braided USB-C cable)
- 2x capacitor capsules (16 mm and 10 mm)
- RGB LED indicator light for mode display
- Mute button
- With universal thread for microphone shock mounts, microphone stands, tripods etc.
- Perfect for YouTubers, broadcasters and gamers
FREI ARD MIC MODUL1 - Arduino - Microphone module, analog
13.15 EUR
The sound detector is based on a microphone and a power amplifier and can be used to detect the sound level in the environment. The sensor receives the signal through both a digital and an analog output.The sensitivity can be adjusted with the potentiometer and the LEDs mounted on the PCB indicate the power and the compressor output.
FREI ARD MIC MODUL5 - Arduino - Microphone module, LM386, analog
13.04 EUR
Sound Sensor Module Audio detection module with LM386 amplifier chipThe sound sensor module is used to detect sounds and is based on the LM386 audio amplifier chip. It amplifies the sound signals detected by the microphone and outputs analog voltage values that can be processed by microcontrollers such as Arduino. The module is ideal for simple noise detection and sound evaluation projects.
- Sensitive microphone input Picks up sound signals from the environment and converts them into electrical signals.
- Integrated LM386 amplifier Amplifies weak input signals for a stable analog output.
- Adjustable sensitivity The noise detection threshold can be adjusted via a potentiometer.
- Compatible with Arduino Direct connection via VCC, GND and A0 possible, easy integration into microcontroller projects.
- Simple wiring Only three wires required, quick commissioning for learning and DIY projects.
Technical data:
- Operating voltage: 5 V DC
- Signal output: analog (OUT)
- Amplifier chip: LM386
- Connection: 3-pin (VCC, GND, OUT)
- Microphone type: Electret condenser microphone
- Compatibility: Arduino, ESP32, Raspberry Pi and others
- Dimensions: approx. 35 × 16 × 8 mm
Areas of application:
- Sound-activated controls
- Light or motor activation for sound events
- Environmental and noise monitoring
- Acoustic detection in learning and electronics projects
- Sound level demonstrations in the education sector
The Sound Sensor Module is a simple, effective solution for sound detection and ideal for beginners in electronics and Arduino projects.
DELOCK 66822 - Multifunctional Dual Capsule USB Microphone
66.75 EUR
This multifunctional USB condenser microphone by Delock can be used for high-quality voice and vocal recording, making it suitable for streaming, podcasting, gaming and video meetings.Optimal recordings & polar pattern switch
The microphone has a dual capsule condenser and therefore has a cardioid polar pattern (unidirectional) and also a circular polar pattern (omnidirectional). The directivity can be adjusted by a switch on the back of the microphone. Therefore, the microphone always captures the sound ideally. Due to a high performance, low self-noise and precise reproduction, even the finest sounds are recorded crystal clear.
Headphone output
The microphone has a 3.5 mm stereo jack for connecting headphones or speakers. The audio output provides a bit depth of 16 bit at a sampling rate of 48 kHz and can therefore record and play back audio signals in DVD quality.
Stepless volume control & quick-mute function
The microphone boost as well as the volume of the headphone output can be adjusted individually on the two volume controls. By pressing the volume control for the microphone gain, the microphone can be muted immediately.
Plug & Play
Due to USB Plug & Play the microphone is ready to use immediately, no driver installation is needed. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux.
Stable stand
The metal base provides a stable stand and the rubber provides a non-slip grip for recording.
Specifications:
- Connectors: 1 x USB Type-C™ 2.0 female, 1 x 3.5 mm 3 pin stereo jack female
- Cable: 1 x USB Type-C™ 2.0 male > 1 x USB 2.0 Type-A male
- Directivity: unidirectional / omnidirectional
- Sensitivity: -35 dB +/- 3 dB
- Frequency range: 20 Hz - 20 kHz
- Sampling rates: recording up to 16 Bit / 48 kHz, playback up to 16 Bit / 48 kHz
- Signal-to-noise ratio (SNR): ca. 70 dB
- Sound pressure level (SPL): max. 110 dB
- Volume control microphone (loud / quiet / mute)
- Volume control headphone output (loud / quiet)
- Polar pattern switch
- Power LED
- Cable length: ca. 1 m
- Housing material: metal
- USB bus powered
- Plug & Play
System requirements
- Chrome OS
- Linux Kernel 4.4 or above
- Mac OS 10.9 or above
- Windows 8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Package content
- USB microphone
- Cable USB Type-C™ male to USB Type-A male
- User manual
THRONMAX M8 - Microphone, MDrill Pulse, 96 kHz
59.51 EUR
Developed and tested by streamers/YouTubers, the Thronmax MDrill Pulse is the last missing part of your gaming/streaming setup! Enjoy the best microphone technology and experience a rich, powerful sound. The MDrill Pulse is well suited for podcasts, vocals or game streaming due to its kidney directivity, which records sound sources directly in front of the microphone. Sit on your computer and let your creativity run wild with Twitch streams, podcasts, voice-overs, interviews, Skype/VoIP calls and music recordings- HD, studio-quality recordings.
- Sample rate: 96 kHz, 24 bit recording
- Frequency: 20 Hz - 20 kHz
- 1 directivity characteristic: kidney-shaped
- Port 1: 3.5 mm aux-in
- Port 2: USB-C (including 2m braided USB-C cable)
- 2x capacitor capsules (16 mm and 6 mm)
- RGB LED as mode indicator
- Includes volume control, mute button and 360° stand
- Active noise reduction reduces background noise and ensures clear, clean sound
THRONMAX NEWM9 - Microphone, Fireball, 48 kHz/16 bit
40.91 EUR
- 14 mm condenser capsule offers crystal clear audio for Skype, Youtube and others
- Record vocals create podcasts, and add narration to your home movies
- Sampling rate: 48 kHz, 16 bit recording
- Plug-and-play – no driver installation needed
- USB 2.0 device (USB 3.0 compatible as per USB 3.0 backward compatibility specification)
- Fast and easy recording
- Compatible with Windows 10, Windows 8 (including 8.1), Windows 7, Windows Vista, Windows XP (Home and Professional), and Mac OS X (10.4.11 or higher), and requires a minimum of 64 MB of RAM
- Cable length: 1.8 m
- Color: Black
With Thronmax Fireball, quick and easy recording is finally a reality. Simply mount Fireball on the included sticky pad stand, plug the USB cable into your Mac or PC and that’s it. You’re ready to sit back and start recording crystal-clear audio for any recording or live streaming.
SEEED RESP MIC 2.0 - ReSpeaker Mic Array v2.0
73.52 EUR
ReSpeaker Mic Array v2.0 from Seeed is an updated version of ReSpeaker Mic Array v1 based on XVSM-2000. v2.0 is based on XVF-3000 from XMOS. It can be placed (connected) directly on top of ReSpeaker Core to greatly enhance the voice interaction experience. To significantly improve ReSpeaker's acoustic DSP performance, 4 PDM microphones are integrated into the board.- Far-field voice acquisition
- Array with four microphones
- 12 programmable RGB LED signal lamps
- voice activity recognition
- arrival direction
- noise suppression
- reverberation suppression
- acoustic echo cancellation
Further information about the board as well as data sheets, instructions, downloads can be found at http://wiki.seeedstudio.com/ReSpeaker_Mic_Array_v2.0/
DELOCK 66882 - Professional USB Condenser Microphone 24 Bit / 192 kHz
51.24 EUR
This professional USB condenser microphone by Delock can be used for high-quality voice and vocal recording, making it suitable for streaming, podcasting, gaming and video meetings.Optimal recordings
The microphone has a 16 mm c
DELOCK 65939 - Microphone, USB, Table Stand
32.64 EUR
This professional USB microphone by Delock can be used for high-quality speech and voice transmissions. The microphone has a circle pattern (omnidirectional) and therefore captures the acoustic signal ideally. Due to a high power, low self-noise and precise performance, even the finest sounds are optimally recorded. The table stand can be folded and transported easily if required.Specification
- Connector: 1 x USB 2.0 Type-A male
- Directivity: omnidirectional
- Sensitivity: -38 dB +/- 3 dB
- Frequency range: 50 Hz - 16 kHz
- Sample rate: 16 Bit / 44.1 kHz
- Signal-to-noise ratio (SNR): ca. 36 dB
- Impedance: 2.2 kOhm
- Cable length: ca. 1.35 m
- Dimensions (LxWxH): ca. 150 x 55 x 30 mm
- USB bus powered
- Plug & Play
System requirements
- Chrome OS
- Linux Kernel 2.6 or above
- Mac OS 10.9 or above
- Windows 7/7-64/8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Package content
- USB microphone
- Table stand
- User manual
Package
- Retail Box
SEEED RPI RESP 2MIC - ReSpeaker 2-Mic HAT for Raspberry Pi
26.8 EUR
The ReSpeaker 2-Mics Pi HAT is an expansion board for Raspberry Pi with two microphones designed for AI and voice applications. It can be used to create more powerful and flexible voice products with integration of Amazon Alexa Voice Service, Google Assistant, etc. The board was developed based on the WM8960 stereo codec with low power consumption.• two microphones
• 2 Grove interfaces with support for GPIO and I2C
• programmable button and LED: one button and three LEDs
Delivery without Raspberry Pi
Further information about the board as well as data sheets, instructions and downloads can be found at https://wiki.seeedstudio.com/ReSpeaker_2_Mics_Pi_HAT/
Instructions in pdf format are available for Grove users (especially beginners). Before using the product, you should definitely read the chapters ''Preface'', ''Getting Started'' and ''Introduction to Grove''!
RPI HB DAC2 PRO - Raspberry Pi Shield - HiFiBerry DAC2 Pro
60.18 EUR
HiFiBerry DAC2 ProThe HiFiBerry DAC2 Pro is a high-resolution digital-to-analog and analog-to-digital converter for the Raspberry Pi (newer models with 40-pin GPIO connector). This is a special sound card for the Raspberry Pi, optimized for a special application: affordable and high quality audio reproduction.
Technical details
• Stereo output
• integrated headphone amplifier
• can be equipped with an additional digital signal processor (DSP) for flexible audio processing
• dedicated 192kHz/24bit Burr-Brown DAC with high quality
• Hardware volume control for DAC (supports ALSA mixer controls)
• connects directly to the Raspberry Pi, no additional cables needed
• compatible with all Raspberry Pi models with a 40-pin GPIO connector
• direct power supply via the Raspberry Pi, no additional power needed
• Two ultra-low noise linear voltage regulators for optimal audio performance
• low-jitter dual-domain clock for optimized clock decoupling from the Raspberry Pi
• HAT compliant, EEPROM for automatic configuration
• gold plated RCA output connectors
• is supplied with all the components required for assembly, including spacers
• Audio connector for connecting an analog audio amplifier
Delivery without Raspberry Pi