TRIDONIC TRDO 87500995 - LED-Netzteil, 65,1 W, 90 - 210 V, 0,2 - 0,35 A, CC 21.01 EUR Treiber LC 65W 200-350mA flexC lp SNC4

Produktbeschreibung

• Konstantstrom-LED-Treiber: für den Leuchteneinbau
• Schutzklasse: I
• Temperaturschutz: gemäß EN 61347-2-13 C5e
• Wählbarer fixer Ausgangsstrom: 200, 250, 300 und 350 mA
• Max. Ausgangsleistung: 65,1 W
• Effizienz: bis zu 93,5 %
• Nominale Lebensdauer: bis zu 100.000 h
• 5 Jahre Hersteller-Garantie

Gehäuse-Eigenschaften

• Gehäuse: Metall, weiß
• Schutzart: IP20

Funktionen

• Überlastschutz
• Kurzschlussschutz
• Leerlaufschutz
• Übertemperaturschutz

Technische Daten
Netzspannungsbereich: 220 - 240 V
Wechselspannungsbereich: 198 - 264 V
Gleichspannungsbereich: 176 - 280 V
Max. Eingangsstrom (bei 230 V, 50 Hz, Volllast): 0,32 A
Typ. Eingangsstrom (bei 230 V, 0 Hz, Volllast): 315 mA
Ableitstrom (bei 230 V, 50 Hz, Volllast): < 450 µA
Netzfrequenz: 0 / 50 / 60 Hz
Überspannungsschutz: 320 V AC, 2 h
Max. Ausgangsleistung: 65,1 W
Ausgangsleistungsbereich: 18 - 65,1 W
Typ. Wirkungsgrad (bei 230 V, 50 Hz, Volllast): 93,5 %
Lambda über gesamten Betriebsbereich (Maximum): 0,98
Lambda über gesamten Betriebsbereich (Minimum): 0,8C
Ausgangsstromtoleranz: ± 7,5 %
Max. Ausgangsspannung (U-OUT): 300 V
THD (bei 230 V, 50 Hz, Volllast): < 10 %
Max. Ausgangsstoßstrom bei Volllast: 395 mA
Ausgangsstrom NF Restwelligkeit (< 120 Hz) bei Volllast: ± 5 %
Ausgang P_ST_LM (bei Volllast): < 1
Ausgang SVM (bei Volllast): < 0,4
Startzeit (bei 230 V, 50 Hz, Volllast): < 0,5 s
Startzeit (DC-Betrieb): < 0,6 s
Umschaltzeit (AC/DC): < 0,3 s
Abschaltzeit (bei 230 V, 50 Hz, Volllast): < 0,5 s
Haltezeit bei Netzunterbrechung (Ausgang): 0 s
Umgebungstemperatur ta (bei Lebensdauer 50.000 h): 60 °C
Lagertemperatur ts: -40 ... +80 °C
Netz-Burst-Festigkeit: 1 kV
Stoßspannungsfestigkeit (zwischen L - N): 1 kV
Stoßspannungsfestigkeit (zwischen L/N - PE): 2 kV
Stoßspannung ausgangsseitig (gegen PE): 3,5 kV
Lebensdauer: bis zu 100.000 h
Garantie: 5 Jahr(e)
Abmessungen L x B x H: 230 x 30 x 21 mm
Lochabstand D: 218 mm

SEE OFFER

LUMBERG LU 2,5 MSF 6 - Pin header, straight, RM 2.5, 6-pin 10.37 EUR 6-pin female multipoint connector, straight, from the LUMBERG Minimodul connector system

for PCBs and device connections with 2.5-mm pitch. Single row, with guide collar and latch for locking the female multipoint connector LU 2.5 MBX 6

SEE OFFER

EDSYN SP 625 - Suction cup (disc) diameter 16.0. mm 18.53 EUR Suction cup for Edsyn lifting needles except LN 250

SEE OFFER

DONAU PPH2 - Professional PCB holder with table clamp 45.08 EUR Professional PCB holder made of aluminium for hobbyists and professionals

2 sliding brackets for large and small printed circuit boards,
with clamping screws for all PCB thicknesses.

Rotates 360° and pivots 270°.

SEE OFFER

AUER SIGNAL AUER SD50-B - Smart Dot Basic beacon, blue, 18 - 30 V DC 91.92 EUR The smart beacon of the Smart Signaling 50 platform from Auer Signal boasts an appealing modern design, brilliant colour reproduction and innovative functions. Whether it's Smart Dot 50 or Smart Indicator 50, they offer outstanding luminosity, which can, for example, increase productivity and safety. Available in a range of designs and functional lines, they are ideal for challenging signalling applications thanks to their robust design with IP66, IP67, IP69, IP69K, IP6K9K protection and IK08 impact resistance.

Main features

• Excellent brightness, colour brilliance and energy efficiency
• Excellent and flexible single-colour signalling
• 10 animations: steady, flash, beat, multi-flash, high-intensity flash, steady ECO, flash ECO, beat ECO, multi-flash ECO, high-intensity flash ECO
• Smart protection
• Nominal voltage: 18 - 30 V DC

SEE OFFER

ARAGONESA DE COMPONENTES ACP 9-SRS 500K - Potentiometer, upright, hexagon, 9 mm, 500 KOhm 10.17 EUR 9-mm carbon trimmer potentiometer with plastic housing and degree of protection IP 5 (dust-proof).

• Self-extinguishing plastic parts in accordance with UL 94 V-0.

Applications:
• Electronic devices: white goods, brown goods, small household appliances
• Heating and air-conditioning technology and thermostats.
• Automotive: dimmer, automatic climate control, lighting control
• Measuring and testing equipment, timers and relays
• Multimedia

SEE OFFER

LAPP 61742429 - Heat-shrink tubing PROTECT BOX, 2:1, 9.5 - 4.7 mm, black 38.77 EUR Heat-shrink tubing PROTECT BOX
The shrinkable plastic hose in a practical box, especially suitable for small consumers.

Use

• Flexible
• Excellent physical and mechanical properties
• Certified for use in North America and Canada

Areas of application
Isolation, protection, and cable bundling

Product characteristics

• Flame retardant (except color: Transparent)
• Silicone-free
• UV resistant (black only)

SEE OFFER

MEDER MK12 1A66C 500W - MK12 Series 1 NO 10W Reed Sensor 15.02 EUR MK12 sensors are magnetically actuated reed sensors designed for screw mounting. The larger housing allows the use of higher power switches. The sensor should be mounted on a fixed surface with the actuating magnet on the moving surface. The introduction or removal of the magnetic field determines the closing and opening of the reed switch.

SEE OFFER

SHIVERPEAKS SHVP 30842 - 3.5 mm W-plug to 2x RCA plug, 1.5 m 16.14 EUR shiverpeaks®-PROFESSIONAL chrome plated metal-angle-plug 3.5 mm and 2 chrome plated metal RCA plug

• Gold plated contacts
• SLIM LINE - 1.5 m
• Colour: blue

SEE OFFER

LAVOCE LAV WSF030.70 - Subwoofer, 30 W, ferrite, 3 inch (8 cm), steel 27.73 EUR 30 W AES, 8 ohm, 85.5 dB, 100 - 2000 Hz

• Experienced Italian development team with outstanding expertise
• A real innovation climate
• Outstanding, elegant Italian design
• Highest standards and excellent testing tools
• Modern and efficient production facilities with a high degree of automation
• Excellent quality assurance system
• Efficient logistics
• ISO 9001 certification

Technical data

• Nominal power handling capacity: 30 W AES
• Program power handling capacity: 60 W
• Frequency range: 100 - 2000 Hz
• Sensitivity: 85.5 dB
• Impedance: 8 ohm
• Speakers:
  
  • Subwoofer (3'') approx. 8 cm with ferrite magnet
  • Grill material: steel
  • Low-frequency voice coil (0.7'') approx. 1.78 cm
• Weight: 0.50 kg

SEE OFFER

COMPRO PSS55030B DT - PSS, black, 3 - 30 V DC, continuous tone 31.6 EUR

• Long service life
• Low power consumption
• High reliability
• No spark formation
• No high-frequency interference
• High sound output
• Simple assembly
• IP65

SEE OFFER

IDEC ID LSTD2R - LED, BA9S, 24VAC/DC, Red 16.72 EUR LED, BA9S, 24VAC/DC, Red

SEE OFFER

SMC PNEUMATIK AKH08-00 - One-way valve 8 mm 26.38 EUR One-way valve
Plug connection both sides
for compressed air, suitable for vacuum
for tube material: nylon, soft nylon, polyurethane

SEE OFFER

ICYBOX ICY IB-1601MP-C - External M.2 NVMe/SATA SSD enclosure with USB 3.2 34.71 EUR Robust and durable
Made of zinc alloy and featuring a screw-on enclosure, this compact enclosure offers high durability. It is designed to withstand shocks, falls and everyday wear and tear with ease.

• Suitable for a size 2230 M.2 NVMe SSD
• Includes thermal pad for optimal heat dissipation
• USB 3.2 Gen 2 Type-C® host connection with a transfer rate of up to 10 Gbps
• Includes a carrying strap for comfort and mobility
• Robust, screwed-mounted zinc alloy enclosure for optimum durability and shock resistance

Easy to transport, ready to use immediately
A sophisticated design for maximum mobility: compact and equipped with a carrying strap, the enclosure is easy to take with you. Simply attach it to your bag, equipment or key ring.

Built for speed
The USB 3.2 Gen 2 Type-C® interface enables transfer rates of up to 10 Gbps, making the IB-1601MP-CU31 a strong choice for fast workflows.

Package contents

• 1x IB-1601MP-CU31
• 1x USB Type-C® to Type-C®/A cable, 30 cm
• 1x thermal pad
• 1x screw
• 1x screwdriver
• 1x carrying strap
• 1x manual

SEE OFFER

SOLDERED DEBO IO EXPANDER - Developer boards - I/O expansion board, MCP23017 14.5 EUR The GPIO Expander MCP23017 is an efficient solution to the problem of the limited number of input/output (IO) pins on microcontrollers. By utilizing I2C communication, this expander allows the addition of 16 additional fully configurable pins that can be connected to any microcontroller with just two wires.

• expands microcontrollers by 16 additional IO pins via I2C communication
• enables the connection of up to eight of these breakout boards to a microcontroller
• configurable I2C address via jumpers on the board
• all pins have pull-out resistors that can be switched on and off
• ideal for projects that require a high number of IO pins

By using the MCP23017, the number of available IO pins of a microcontroller can be increased considerably without significantly increasing the complexity of the overall system. The ability to change the I2C address using jumpers allows several such expanders to be operated in parallel, enabling a total expansion of up to 128 additional pins. The pull-out resistors on the board provide additional flexibility for signal integrity and customization to specific project requirements.

Technical data

• Dimensions: 38 mm x 22 mm
• Normal current consumption: 1 mA
• current consumption at standstill: 1 µA
• Logic voltage: 5 V
• Operating voltage: 1.8 ... 5,5 V
• Communication: I2C (address: 0x27)
• Connections: easyC x2
• easyC/Qwiic compatibility
• Holes for mounting: 2

The GPIO Expander MCP23017 is a cost-effective and easy-to-implement solution for significantly expanding the IO capacity of microcontrollers. Its configurability and the possibility of using several expanders in parallel make it an indispensable tool for complex or pin-intensive projects.

easyC
easyC is a robust connection system that optimizes the connection of microcontrollers, sensors and actuators using JST-SH compatible connectors (JST 4-pin). It offers solderless connections, serial connections of multiple devices (daisy-chaining), error-free design, parallel connection, universal compatibility and intermediate compatibility with Qwiic (Sparkfun connection system), simplifying prototype development. Further information on easyC can be found under ''Data sheets''.

External links
https://github.com/SolderedElectronics/Soldered-MCP23017-Port-Expander-Arduino-Library
https://github.com/SolderedElectronics/IO-expander-MCP23017-breakout-hardware-design

SEE OFFER

WEICON KLEBER MIX METAL - Easy-Mix epoxy adhesive, metal, 50 ml 32.68 EUR WEICON 2-component adhesive, Easy-Mix, metal

Ideal bonds where greater tolerances need to be bridged. Very short processing time and mechanically processable after curing.

Epoxy adhesives are cold-curing, solvent-free 2-component systems with extremely high bonding strength. They cure to produce a residual elastic bond with high tensile and impact strength. The ideal adhesive for construction, assembly and repairs. For bonding almost all materials such as metal, glass, stone, ceramics, wood and many hard plastics. The cured adhesives do not shrink and are resistant to chemicals.

Processing time: 5 minutes
Properties: steel-filled, viscous, self-levelling
Contents: 50 ml

Epoxy resins have a high allergenic potency, i.e. they can quickly cause skin allergies. Please note the information on the safety data sheets when handling and wear suitable chemical protective gloves. Under data sheet/operating instructions you will find a guideline document on handling epoxy resin from the professional association of the construction industry.

Use with dosing gun (accessories)

SEE OFFER

ROLINE 12021004 - USB converter, Micro B socket to RS422/485, DIN rail 175.23 EUR Converter for RS422/RS485 devices to a PC USB port

• Compatible with USB 2.0, USB 1.1 and USB 1.0
• 15-KV ESD protection for all serial ports
• RS422/485 signal surge protection
• 12 Mbps USB data rate
• Max. 32 devices can be connected
• Connections: terminal block, 1x USB type A plug
• For DIN rail mounting
• Windows 98, 98SE, ME, 2000, Server 2003, XP, Server 2008, XP 64-bit, Windows Vista, Vista 64-bit, Server 2008 R2, Windows 7, Windows 7 X64, Mac OS 8/9, OS-X
• Power supplied via the USB port of the connected PC (5 VDC, 40 mA)

SEE OFFER

DELOCK 82974 - Delock Slot bracket USB 3.0 pin header 19 pin 2 x internal > 4 x 41.37 EUR Verpackung

• Wiederverschließbare Tüte

SEE OFFER

JOY-IT GRABIT ROBO-SET2 - Grab-it robot arm kit, incl. Arduino Uno Q 2GB 268.25 EUR Robot arm set with motor controller and Arduino UNO Q - complete solution for robotics and automation

This modular set provides a versatile basis for learning, developing and implementing modern automation and robotics projects. The combination of precise robot arm, intelligent motor controller and powerful Arduino UNO Q creates a flexible system for education, research and industrial applications.

• Robot arm ''Grab-It'': Made of black anodized aluminium, equipped with six powerful PWM servo motors and a stable precision claw for exact gripping.
• Turntable and base: Ball-bearing mounted, 360° rotating turntable on a robust base plate measuring 28.5 × 16 cm, including holes for easy mounting of controller and control unit.
• Motorino board: Intelligent motor controller for up to 16 PWM-controlled 5 V stepper motors, with integrated clock generator and separate voltage inputs (4.8-6 V) up to 11 A total power.
• Arduino UNO Q: Dual-processor system with Qualcomm Dragonwing QRB2210 and STM32U585, compatible with Arduino UNO ecosystem and Qwiic modules, ideal for AI-based applications.

Technical data:

• Material: Black anodized aluminium
• Motors: 6 × PWM servo motors, up to 20 kg/cm load capacity
• Turntable: 360° ball bearing mounted, base plate 28.5 × 16 cm
• Power supply: 4.8-6 V DC, up to 11 A total output
• Control: Motorino board with integrated PWM clock generator
• Controller: Arduino UNO Q with Qualcomm Dragonwing QRB2210 (MPU) and STM32U585 (MCU)
• Programming environment: Arduino IDE, Python under Linux Debian
• Compatibility: Arduino UNO ecosystem, Qwiic modules, Arduino Cloud and App Lab

Areas of application:

• Training and education labs in the STEM sector
• Prototype development in research and technology
• Automation and manufacturing projects in industrial environments
• DIY and maker projects with a focus on robotics and AI

Scope of delivery:

• Black plastic case for safe storage and transportation
• Robot arm including all motors
• Arduino Uno Q with 2 GB memory
• Motorino board for controlling the PWM servo motors
• 5 V / 4 A power supply unit for powering the robot arm

SEE OFFER

FREI AKKU 31232 - Replacement battery, DJI Phantom 3, Li-Po, 4980 mAh 107.94 EUR Replacement battery for DJI drones.

Compatible replacement battery, not an original battery from the manufacturer!

Refer to the device and battery numbers listed to select the right battery for your device!

Replacement battery suitable for:
DJI: Phantom 3, Phantom 3 Advance, Phantom 3 Drones, Phantom 3 Professional

Identical to the following batteries:

DJI: PH3, PHA-3

Please note:

Opening your device voids the warranty. Installing this battery is especially complex and follows at your own risk. We do not assume any liability for damage and failure with devices and/or batteries.

SEE OFFER