DELOCK 66640 - Microphone, XLR connector / 3 pin stereo jack male, adapter cabl
40.91 EUR
Consult the informative sheet with in-depth details, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; falls into the CATEGORY NAME; the product is marketed by SELLER NAME and produced by MANUFACTURER NAME.
Professional Computer Podcasting Microphone with XLR connector and 3 pin stereo jack male + adapter cable for Smartphone and Tablet
This professional condenser microphone by Delock can be used for high-quality voice and vocal recordings.
Optimal recordings
The microphone has a high-quality 16 mm condenser chip and a cardioid polar pattern (unidirectional) and therefore ideally captures the sound. Due to high power, low self-noise and precise performance, even the finest sounds are recorded crystal clear.
Good windscreen
Due to the included windscreen, the recording quality is further optimized. Disturbing wind noises are optimally filtered.
Multifunctional application
It can be connected to any PC or laptop via the detachable XLR to 3 pin stero jack cable. With the included 4 pin Y-adapter cable, it can also be connected to a tablet or smartphone.
Stable & non-slip stand
The metal stand with rubber feet ensures that the microphone stands stable on the table. The microphone holder can be adjusted in a 180° angle as required. The table stand can be easily folded and transported when needed.
Specification
System requirements
Package content
Package
EAN: 4043619666409
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Professional Computer Podcasting Microphone with XLR connector and 3 pin stereo jack male + adapter cable for Smartphone and Tablet
This professional condenser microphone by Delock can be used for high-quality voice and vocal recordings.
Optimal recordings
The microphone has a high-quality 16 mm condenser chip and a cardioid polar pattern (unidirectional) and therefore ideally captures the sound. Due to high power, low self-noise and precise performance, even the finest sounds are recorded crystal clear.
Good windscreen
Due to the included windscreen, the recording quality is further optimized. Disturbing wind noises are optimally filtered.
Multifunctional application
It can be connected to any PC or laptop via the detachable XLR to 3 pin stero jack cable. With the included 4 pin Y-adapter cable, it can also be connected to a tablet or smartphone.
Stable & non-slip stand
The metal stand with rubber feet ensures that the microphone stands stable on the table. The microphone holder can be adjusted in a 180° angle as required. The table stand can be easily folded and transported when needed.
Specification
- Connector: 1 x XLR plug
- Cable:
1 x XLR jack >
1 x 3.5 mm 3 pin stereo jack male - Y-Adapter:
1 x 3.5 mm 4 pin stereo jack male (CTIA standard) >
1 x 3.5 mm 3 pin stereo jack female microphone
1 x 3.5 mm 3 pin stereo jack female headset - Directivity: unidirectional
- Sensitivity: -38 dB +/- 3 dB
- Frequency range: 30 Hz - 16 kHz
- Signal-to-noise ratio (SNR): ca. 70 dB
- Self-Noise: max. 16 dBA
- Sound pressure level (SPL): max. 120 dB
- Cable length: ca. 2.5 m
- Colour: black
- Voltage: 1.5 V
System requirements
- a free stereo port 3.5 mm
Package content
- XLR microphone
- XLR to stereo jack cable
- Y-adapter cable
- Windscreen
- Microphone holder
- Table stand
Package
- Retail Box
EAN: 4043619666409
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (spiral shield, 95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (spiral shield, 95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (spiral shield, 95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (spiral shield, 95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (spiral shield, 95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (spiral shield, 95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (spiral shield, 95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (spiral shield, 95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (spiral shield, 95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (spiral shield, 95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
Specification
- Connector: 3.5 mm 4 pin Stereo jack male > 2.5 mm 3 pin Stereo jack female angled
- Pin assignment 3.5 mm 4 pin Stereo jack male: Left – Right – Ground - AUX
- Gold-plated contacts
- Length: ca. 17.5 cm
- Colour: black
System requirements
- A free 3.5 mm 4 pin Stereo jack female port
Specification
• Connector: USB 2.0 type A male Serial-TTL male > 2.5 mm 3 pin stereo jack male
• Pin assignment:
1. GND
2. TXD
3. RXD
• Chipset: FTDI 232RL
• Cable gauge: 26 AWG
• Temperature range: -20°C to +80°C
• No-load current: 70 uA
• Converter: 5 V / 15 mA (VCC, GND)
• Compatible to UHCI / OHCI / EHCI controller
• VTTL 5 V (data) / 4 mA or HighLevel 12 mA
• Data rate 300 baud - 3 Megabaud
• Databit: 7 or 8
• Stoppbits: 1 or 2
• Parity: none, space, even, odd, mark
• Flow control: software XON/XOFF or hardware RTS / CTS
• FIFO: 128 Byte -RX
256 Byte -TX
• Cable length: ca. 1.80 m
System requirements
• Windows CE 4.2, 5.0, 6.0/Windows Mobile 2003/ XP/XP-64/Vista/Vista-64/7/7-64,
Mac OS 10.5 and 10.6, Linux Kernel 2.6
• PC or laptop with a free USB type A port
Package content
• USB TTL cable
• Driver CD
• User manual
Package
• Retail Box
Specification
• Connector: USB 2.0 type A male Serial-TTL male > 2.5 mm 3 pin stereo jack male
• Pin assignment:
1. GND
2. TXD
3. RXD
• Chipset: FTDI 232RL
• Cable gauge: 26 AWG
• Temperature range: -20°C to +80°C
• No-load current: 70 uA
• Converter: 5 V / 15 mA (VCC, GND)
• Compatible to UHCI / OHCI / EHCI controller
• LVTTL 3.3 V (data) / 4 mA or HighLevel 12 mA
• Data rate 300 baud - 3 Megabaud
• Databit: 7 or 8
• Stoppbits: 1 or 2
• Parity: none, space, even, odd, mark
• Flow control: software XON/XOFF or hardware RTS / CTS
• FIFO: 128 Byte -RX
256 Byte -TX
• Cable length: ca. 1.80 m
System requirements
• Windows CE 4.2, 5.0, 6.0/Windows Mobile 2003/ XP/XP-64/Vista/Vista-64/7/7-64,
Mac OS 10.5 and 10.6, Linux Kernel 2.6
• PC or laptop with a free USB type A port
Package content
• USB TTL cable
• Driver CD
• User manual
Package
• Retail Box
Technical details
- Connector: Stereo jack 3.5 mm 4 pin > Stereo jack 3.5 mm 4 pin angled
- Pin assignment 4 pin stereo jack with CTIA standard:
Audio left - Audio right - GND - AUX - Cable gauge: 24 AWG
- Gold-plated connector
- Colour: black
- Length: ca. 1 m
System requirements
- A free stereo jack female port
Package content
- Stereo jack cable
Package
- Zip poly bag
Specification
• Connector: 3.5 mm 3 pin Stereo jack male > 3.5 mm 3 pin Stereo jack female
• Cable gauge: 24 AWG
• Gold-plated connector
• Colour: white
• Cable length: ca. 1 m
System requirements
• A free 3.5 mm stereo jack port
Package content
• Stereo jack cable
Package
• Poly bag
This stereo jack cable by Delock with 4 pin male connector is compatible to iPhone, iPad and iPod. It enables the connection of a mobile device to e.g. a stereo system or car radio. One of the stereo jack connectors is angled, in case the existing stereo jack female port is difficult to access.
Specification
- Connectors:
- Cable gauge: 24 AWG
- Gold-plated connectors
- Colour: black
- Length incl. connectors (L): ca. 0.5 m
1 x 3.5 mm 4 pin audio stereo jack male >
1 x 3.5 mm 4 pin Stereo jack male angled
System requirements
A free stereo jack female port
Package content
Stereo jack cable
Package
Poly bag
Specification
• Connector: 3.5 mm 3 pin Stereo jack > 3.5 mm 3 pin Stereo jack
• Cable gauge: 24 AWG
• Gold-plated connector
• Colour: black
• Length: ca. 2 m
System requirements
• A free stereo jack female port 3.5 mm
Package content
• Stereo jack cable
Package
• Poly bag
Technical details
- Connector: 3.5 mm 3 pin Stereo jack male > 3.5 mm 3 pin Stereo jack female
- Cable gauge: 24 AWG
- Gold-plated connector
- Colour: black
- Cable length: ca. 0.5 m
System requirements
- A free 3.5 mm stereo jack port
Package content
- Stereo jack cable
Package
- Zip poly bag
Technical details
- Connector: Stereo jack 3.5 mm 4 pin > Stereo jack 3.5 mm 4 pin angled
- Pin assignment 4 pin stereo jack with CTIA standard:
Audio left - Audio right - GND - AUX - Cable gauge: 24 AWG
- Gold-plated connector
- Colour: white
- Length: ca. 0.5 m
System requirements
- A free stereo jack female port
Package content
- Stereo jack cable
Package
- Zip poly bag
Specification
• Connector: USB 2.0 type A male Serial-TTL male > 3.5 mm 4 pin stereo jack male
• Pin assignment:
1. GND
2. TXD
3. RXD
4. VCC
• Chipset: FTDI 232RL
• Cable gauge: 28 AWG
• Temperature range: -20°C to +80°C
• No-load current: 70 uA
• Converter: 5 V / 15 mA (VCC, GND)
• Compatible to UHCI / OHCI / EHCI controller
• TTL 5 V (data) / 4 mA or HighLevel 12 mA
• Data rate 300 baud - 3 Megabaud
• Databit: 7 or 8
• Stoppbits: 1 or 2
• Parity: none, space, even, odd, mark
• Flow control: software XON/XOFF or hardware RTS / CTS
• FIFO: 128 Byte -RX
256 Byte -TX
• Cable length: ca. 1.80 m
System requirements
• Windows CE 4.2, 5.0, 6.0/Windows Mobile 2003/ XP/XP-64/Vista/Vista-64/7/7-64,
Mac OS 10.5 und 10.6, Linux Kernel 2.6
• PC or laptop with a free USB type A port
Package content
• USB TTL cable
• Driver CD
• User manual
Package
• Retail Box
- Connector: 1 x 3.5 mm 3 pin stereo jack male > 2 x 3.5 mm 3 pin stereo jack female
- 2 x volume control buttons
- Cable gauge: 30 AWG
- Gold-plated contacts
- Length: ca. 19 cm (incl. connector)
- Colour: black
The conductor cross-section of 0.14 mm² and spiral sheathing protect your signals against disturbance from external influences. Thanks to the single-strand design (18 x 0.10 mm) and the robust yet flexible PVC-blend sheathing, it is particularly flexible.
The conductor cross-section of 0.14 mm² and spiral sheathing protect your signals against disturbance from external influences. Thanks to the single-strand design (18 x 0.10 mm) and the robust yet flexible PVC-blend sheathing, it is particularly flexible.
The conductor cross-section of 0.14 mm² and spiral sheathing protect your signals against disturbance from external influences. Thanks to the single-strand design (18 x 0.10 mm) and the robust yet flexible PVC-blend sheathing, it is particularly flexible.
The conductor cross-section of 0.14 mm² and spiral sheathing protect your signals against disturbance from external influences. Thanks to the single-strand design (18 x 0.10 mm) and the robust yet flexible PVC-blend sheathing, it is particularly flexible.
The conductor cross-section of 0.14 mm² and spiral sheathing protect your signals against disturbance from external influences. Thanks to the single-strand design (18 x 0.10 mm) and the robust yet flexible PVC-blend sheathing, it is particularly flexible.
The conductor cross-section of 0.14 mm² and spiral sheathing protect your signals against disturbance from external influences. Thanks to the single-strand design (18 x 0.10 mm) and the robust yet flexible PVC-blend sheathing, it is particularly flexible.
The conductor cross-section of 0.14 mm² and spiral sheathing protect your signals against disturbance from external influences. Thanks to the single-strand design (18 x 0.10 mm) and the robust yet flexible PVC-blend sheathing, it is particularly flexible.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
Specification
- Connectors:
2 x RCA male >
1 x 3.5 mm 3 pin stereo jack female - Cable gauge: 29 AWG
- Copper conductor
- Colour: black
- Length incl. connectors: ca. 1.4 m
System requirements
- Two free RCA female ports
Package content
- Audio cable
Package
- Poly bag
Specification
- Connectors:
2 x RCA male >
1 x 3.5 mm 3 pin stereo jack female - Cable gauge: 29 AWG
- Copper conductor
- Colour: black
- Length incl. connectors: ca. 20 cm
System requirements
- Two free RCA female ports
Package content
- Audio cable
Package
- Poly bag
