IDUINO ARD MIC MODUL4 - Arduino - Microphone module, analog
12.01 EUR
Browse the detailed sheet with complete information, compare prices and identify the features of PRODUCTNAME, proposed at the cost of PRICE CURRENCY; belongs to the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
Large microphone module
This is a highly sensitive sound detection module with two output signal pins.
D0: When it detects a sound up to a certain threshold, it can output a high or low level.
A0: It can output the output voltage signal of the microphone in real time.
EAN: 0791352941812
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Large microphone module
This is a highly sensitive sound detection module with two output signal pins.
D0: When it detects a sound up to a certain threshold, it can output a high or low level.
A0: It can output the output voltage signal of the microphone in real time.
EAN: 0791352941812
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
IDUINO ARD MIC MODUL2 - Arduino - Microphone module, analog
12.01 EUR
Small microphone module for Arduino, analogueSpecification
• power supply: 5 V / 3.3 V
• analog output
• high sensitivity microphone
• power indicator light
• frequency response range: 50 Hz - 20 KHz
• impedance: 2.2 kOhm
• Sensitivity: 48 - 66 dB
• Polar pattern: universal
• Operating temperature: -40 ... +85 C
• Operating humidity: 30 - 90%.
• Hole for mounting screw 3 mm.
• dimensions (L x W x H): 40 x 15 x 10 mm
IDUINO ARD SHD JOYSTICK - Arduino Shield - Joystick Extension v1.0
13.41 EUR
Joystick extension v1.0This joystick/gamepad shield is based on Nokia 5110 LCD\RF24L01 interface. You can easily develop joystick games and communicate wirelessly. The shield turns your Arduino into a simple controller with 7 buttons ( (4 x big buttons, 2 x small buttons + joystick select button ) and a two-axis thumb joystick.
Specifications• nRF24L01 RF interface
• Nokia 5110 LCD interface
• Bluetooth interface
• I2C interface
• PS2 joystick
• Operating voltage: 3,3V or 5V e.g. STM32
• X,Y-axis with push button
• 6-button operation
• dimensions (L x W x H): 87 × 54 × 18 mm
IDUINO ARD PSHD MEGA - Arduino Shield - Protoshield, for Mega
13.52 EUR
Prototype Shield Board Kit - for Arduino MegaInput voltage : 7 - 12 VDC
Output voltage : 5 V / 3,3 V
Dimensions (L x W x H): 106 x 56 x 19 mm
IDUINO ARD RTC DS1307 - Arduino - RTC - Real Time Clock, Tiny RTC Module, 24C3232K
11.19 EUR
"Real-time clocks (RTCs) are, as the name suggests, clock devices. The DS1307 real-time clock IC is an 8-pin device with an I2C interface, a low-power calendar with 56 bytes of battery-backed SRAM. The clock/calendar provides seconds, minutes, hours, day, date, month and year. The end date of each month is automatically adjusted, especially for months with less than 31 days.The main advantage of RTCs is that they have battery backup, which keeps the clock/calendar running even in the event of a power failure. An exceptionally small amount of power is required to keep the RTC running.
Technical features
- DS1307 RTC
- I²C interface
- for LIR2032 (not included)
- less than 500 nA in backup mode
FREI ARD MIC MODUL5 - Arduino - Microphone module, LM386, analog
13.04 EUR
"Sound Sensor Module Audio detection module with LM386 amplifier chipThe sound sensor module is used to detect sounds and is based on the LM386 audio amplifier chip. It amplifies the sound signals detected by the microphone and outputs analog voltage values that can be processed by microcontrollers such as Arduino. The module is ideal for simple noise detection and sound evaluation projects.
- Sensitive microphone input Picks up sound signals from the environment and converts them into electrical signals.
- Integrated LM386 amplifier Amplifies weak input signals for a stable analog output.
- Adjustable sensitivity The noise detection threshold can be adjusted via a potentiometer.
- Compatible with Arduino Direct connection via VCC, GND and A0 possible, easy integration into microcontroller projects.
- Simple wiring Only three wires required, quick commissioning for learning and DIY projects.
Technical data:
- Operating voltage: 5 V DC
- Signal output: analog (OUT)
- Amplifier chip: LM386
- Connection: 3-pin (VCC, GND, OUT)
- Microphone type: Electret condenser microphone
- Compatibility: Arduino, ESP32, Raspberry Pi and others
- Dimensions: approx. 35 × 16 × 8 mm
Areas of application:
- Sound-activated controls
- Light or motor activation for sound events
- Environmental and noise monitoring
- Acoustic detection in learning and electronics projects
- Sound level demonstrations in the education sector
The Sound Sensor Module is a simple, effective solution for sound detection and ideal for beginners in electronics and Arduino projects."
FREI ARD MIC MODUL1 - Arduino - Microphone module, analog
13.15 EUR
The sound detector is based on a microphone and a power amplifier and can be used to detect the sound level in the environment. The sensor receives the signal through both a digital and an analog output.The sensitivity can be adjusted with the potentiometer and the LEDs mounted on the PCB indicate the power and the compressor output.
IDUINO ARD KIT SENSOR04 - Arduino - Sensor Kit 37in1
39.51 EUR
Sensor Kit 37 in1Scope of delivery
• joystick module
• relay module
• microphone module (large)
• Microphone Module (small)
• tracking module
• obstacle avoidance module
• flame sensor
• magnetic hall sensor
• Touch Sensor
• SMD RGB Led Module
• digital temperature sensors
• buzzer module
• two-color LED module (5 mm)
• bicolor LED module (3 mm)
• reed switch module
• passive buzzer/sounder
• RGB LED module
• LED Module
• mini reed switch module
• heart rate sensor
• seven color flash
• laser module
• tactile switch
• rotary coding module
• magic light cup module
• shock module
• mercury tilt module
• ball switch module
• light dependent resistor module
• hall effect sensor
• temperature and humidity module
• analog temperature sensor
• digital temperature sensor
• magnetic Bihor sensor
• IR transmitter
• optical broken module
• Hit Sensor Module
IDUINO ARD KIT SENSOR05 - Arduino - Sensor kit 24in1
34.55 EUR
This is the basic version of the Sensor Learning Kit. It contains 24 very simple modules that can help you quickly understand and grasp the use of a wide variety of sensors. Important: Please be sure to avoid direct contact with the human eye for the included laser head module!
Scope of delivery
• IR Transmitter Module
• IR Receiver Module
• Mini Reed Switch Module
• Ball Switch Module
• Light Dependent Resistor Module
• Tactile Switch Module
• Active Buzzer Module
• Passive Buzzer Module
• Linear Magnetic Hall Sensor
• Temperature and Humidity Module
• RGB LED Module
• Line Tracking Module
• Obstacle Avoidance Sensor
• Flame Sensor Module
• Touch Sensor
• Laser Module
• Hit Sensor Module
• DS18B20 Temperature Module
• 1 Channel Relay Module
• Large Microphone Module
• Rotary Encode Module
• Switch light module
• 3 W LED Module
• DS1307 RTC Module
ARD SHD ASX00021 - Arduino Pro Shield - Portenta Vision with LAN
57.03 EUR
Portenta Vision Shield: a production-ready solution for embedded ML applications in combination with the Arduino Portenta H7 boardThe Vision Shield is supplied with a 324 x 324 pixel camera module containing an ultra low power image sensor designed for always-on vision devices and applications. The highly sensitive image sensors can capture gestures, ambient light, proximity detection and object identification.
• professional image processing
• directed audio detection
• Ethernet or LoRa (depending on shield)
• JTAG
• for Arduino Portenta
Arduino has teamed up with OpenMV to offer a free license for the OpenMV IDE, which allows an easy entry into image processing with MicroPython. With OpenMV, all professionals, researchers and developers can develop cost-effective Python-based camera vision and audio applications. With the two digital microphones integrated in all directions you can record sounds to the videos, which can be stored on a MicroSD card.
Transfer data either via Ethernet or LoRa®.ARD SHD ASX00021 (Shield with LAN)
ARD SHD ASX00026 (Shield with LoRa)
Technical data• Camera: Himax HM-01B0 Camera module
• resolution: 320 x 320 active pixel resolution with support for QVGA
• Image sensor: Highly sensitive 3.6-µ-BrightSenseTM pixel technology
• Microphones: 2x MP34DT06JTR
• Connection: LAN
• Interface: JTAG
• Dimensions (LxW): 66 x 25 mm
Scope of delivery
Portenta Shield with LAN function
external links
https://openmv.io/pages/download
https://www.arduino.cc/pro/tutorials/portenta-h7/por-openmv-bt
ARD NANO RP2040 - Arduino Nano RP2040 Connect, RP2040, without header
36.72 EUR
"The Arduino Nano RP2040 Connect is an Arduino with a Raspberry Pi inside, as the board's ""brain"" is the Raspberry Pi's own RP2040 dual-core ARM Cortex M0+ running at 133 MHz.Thanks to the u-blox NINA-W102 radio module, the RP2040 CONNECT is the only networked board in this series, and in addition, the built-in microphone is used to activate and control the board, as well as voice recognition via AI. Furthermore, an intelligent, six-axis IMU with AI features ensures that the board detects movements such as falling down, tapping twice, etc.
Arduino Cloud
Program and operate your NANO RP2040 CONNECT directly from your browser. Fully compatible, from day one.
Upload and operate your sketches wirelessly with the smartphone app ""Arduino IoT Remote"".
Technical features• WLAN: 802.11b/g/n
• Bluetooth Low Energy v4.2
• supports Arduino IDE 2.0
• compatible with Raspberry Pi RP2040 software
• full support for MicroPython
Notice: • this board comes without integrated headers.
• incl. free OpenMV license for machine vision"
SIEMENS SM 1231 4AI RTD - Analog input, SM 1231 RTD, 4xAI RTD module
437.35 EUR
"RT-Signal Modul- zur komfortablen Erfassung von Termperaturen mit hoher Genauigkeit
- gängigste Widerstands-Temperaturfühler einsetzbar
- leicht in eine bestehende Anlage nachrüstbar
FREI ARD SHD EXP MEGA - Arduino Shield - Expansion Board Sensor V2, Mega 2560
14.29 EUR
Expansion board for an Arduino Mega2560, ideal to equip it with many sensors. The board routes the analog and digital ports of the Arduino to corresponding 3-pin connectors, where many sensors or actuators can be connected directly.In addition, the board forwards important functions such as the status LED or the reset button, so that they remain easily accessible.
In addition, the board comes with its own terminal strip, which can be used to supply the connected devices with power. You only have to remove the jumper next to it.
Technical data
• has a power LED and a D13 display
• has a reset button
• extends the digital and analog interface to 3-pin
• has a serial communication interface
• extends the ICSP and SPI interface
• terminal block for power supply
IDUINO ARD SEN LDR - Arduino - Photo Resistor Module (LDR)
11.55 EUR
"Light dependent resistor (LDR) as module for easy use with the Arduino and for measuring the light intensity.Technical data
- Operating voltage: 5 V
- 3-pin output (signal, plus, ground)
- Dimensions: 25 x 15 mm
An analog real-time voltage signal is output via the signal pin."
IDUINO ARD MAGIC LIGHT - Arduino - Light breaker module
11.45 EUR
Jedes Modul enthält eine rot leuchtende LED sowie einen Kugelschalter. Rollt die Kugel in diesem Schalter durch die Schwerkraft und Neigung von einem zum anderen Ende des Schalters, wird ein Kontakt geschlossen und die Leuchtdiode kann beginnen zu leuchten. Mit diesem Prinzip können Sie spannende Experimente oder Spiele umsetzen. Für den sogenannten Magischen Becher finden Sie Anschluss- und Codebeispiel im hinterlegten Datenblatt.Merkmale
• Anschluss über 4-polige Stiftleiste
• Betriebsspannung 3,3 - 5 V DC
Anschluss
• 1- Signalausgang
• 2- Eiingang für LED
• 3- Spannungs+
• 4- Masse
IDUINO ARD IR2 TX - Arduino - IR transmitter module
11.5 EUR
Sendemodul mit einer 940 nm Infrarotdiode, passend zu dem Empfängermodul ARD IR2 RX.Technische Daten der Diode
5 mm Infrarotdiode
940 nm Wellenlänge
19 m Leuchtreichweite
IDUINO ARD IR TX - Arduino - IR transmitter module
11.55 EUR
Infrarot-Sender ähnlich ARD IR2 TX, jedoch mit zusätzlicher LED zur Anzeige des Betriebszustandes.Zum Anschluss werden drei Pins und eine 5 V Betriebsspannung benötigt.
• Betriebsspannung: 5 V DC
• Maße: 25 x 12 mm
IDUINO ARD SHD XBEE - Arduino Shield - Xbee Bottom Board
11.45 EUR
XBEE conversion boardThis Arduino XBEE conversion board allows you to quickly and easily interface a Bluetooth XBEE module on a breadboard, without the need for jumper cables or soldering.
This board converts all 20 XBEE pins to double row pins with 0.25 cm standard spacing. The corresponding pins are clearly labeled for easy identification.
IDUINO ARD PSHD3 UNO - Arduino Shield - Protoshield kit with plug-in board, for Uno
12.33 EUR
ProtoShield kit with plug-in boardArduino ProtoShield prototype expansion board including mini breadboard. Can be used with Arduino ProtoShield prototype expansion board to build prototype circuit.
All pins and power supply led outside, perfect for building prototype circuit with Arduino.
Specifications• 1 x reset button, 1 x general purpose button and 2 LED circuits.
• 5V, GND and raw pins
• SOIC space for IC
• mini breadboard with 170 points
• dimensions (L x W x H): 44 x 34 x10 mm
IDUINO ARD LINE FINDER1 - Arduino - IR Line Finder
12.53 EUR
Line following module for simple robotics tasks. When the sensor hits a black background, a TTL signal is output, which can be further processed to control a robot.Technical dataOperating voltage: 3.3 - 5 V
Operating current: 20 mA @ 5 V
Dimensions: 28 x 10 mm
IDUINO ARD SEN HALL3 - Arduino - Hall Magnet Sensor, linear
12.33 EUR
Hall sensors detect magnetic fields, such as those generated in current-carrying conductors or coils, and can measure them. They form the basis of door locking systems, belt buckles or current sensors.The signals of this practical module can be evaluated with an Arduino as well as with a Raspberry Pi.
Technical data• 5 V supply voltage
• Dimensions: 25 x 12 mm
IDUINO ARD SEN HALL1 - Arduino – Hall Magnetic Field Sensor, A3141
11.45 EUR
"DescriptionThe sensor can detect and also analyse magnetic fields through the Hall effect. Unlike many other modules, no binary signal is output here. Instead, an analogue, real-time voltage signal is output via the analogue pin. This can very readily be analysed and recorded with an Arduino. An additional analogue-to-digital converter (ADC) is required for a Raspberry Pi.
Technical features
- Sensor: A3141
- Operating voltage: 5 V
- Connection: 3 pin
- Dimensions: 24 x 15 x 10 mm
Connections
- S: Analogue voltage signal
- +: Voltage supply
- -: Earth
Note
A sample connection and code can be found in the data sheet provided"
IDUINO ARD SEN HALL2 - Arduino – Hall Magnet Sensor
11.5 EUR
"DescriptionThe sensor can detect magnetic fields through the Hall effect, and it outputs a corresponding digital voltage signal. The sensor can thus be used as a magnetic switch.
Technical features
- Operating voltage: 5 V
- Connection: 3 pin
- Dimensions: 25 x 12 mm
Connections
- S: Digital voltage signal
- +: Voltage supply
- -: Earth
Note
A sample connection and code can be found in the data sheet provided"
IDUINO ARD IR RX - Arduino - IR Receiver
11.35 EUR
Infrarot-Empfänger ähnlich ARD IR2 RX, jedoch mit zusätzlicher LED zur Anzeige des Betriebszustandes.Zum Anschluss werden drei Pins und eine 5 V Betriebsspannung benötigt.
• Betriebsspannung: 5 V DC
• Maße: 25 x 12 mm
IDUINO ARD IR2 RX - Arduino - IR Receiver
11.45 EUR
Infrarot-Empfängermodul für Arduino und andere Entwicklerboards. Das hochwertige Modul wird über 3 Pins verbunden und dabei mit 5 V versorgt.Technische Daten
• Betriebsspannung: 5 VDC
• Abmessungen: 28 x 15 x 2 mm
IDUINO ARD SEN1 KNOCK - Arduino – Knock Sensor, LED Indicator
11.35 EUR
"This knock sensor detects impacts and outputs a high-level signal when an impact occurs. These modules are also referred to as knock switches and can be used for touch detection, etc.In contrast to the ARD SEN2 KNOCK , this module contains an additional LED that makes changes in the output signal recognisable.
Technical data
- Compatible with Arduino
- Operating voltage: 5 V
- Dimensions: 28 x 15 mm
Pin assignment
- OUT - digital signal output
- VCC - voltage supply
- GND - earth
Note
Refer to the data sheet provided for programming and connection examples."
ARDUINO ARD TPX00200 - GNSS GPS module, 4G
87.42 EUR
"Pro 4G GNSS Module Global- Add 4G connectivity and positioning to the Portenta family
- Guarantee reliable and quick data download and upload even in remote locations
- Enable long range coverage, both indoors and outdoors
- Change connectivity capabilities without changing the board
- Reduce infrastructure investments with respect to other traditional solutions
- Install your products in multiple countries leveraging the global network coverage
- Send SMS and set-up real-time notifications in case of alarms
- Take advantage of the widely adopted Mini PCIe form factor
The cutting-edge Arduino Pro 4G Module allows you to expand your connectivity capabilities to unlock the full potential of your projects - without changing your Portenta board.
Powered by a robust Cat.4 modem from Quectel, it ensures fast data throughput and high bandwidths for quick data download and upload, in even the most remote locations. Secure data transfer and long-range coverage make it ideal for challenging environments.
Developed in the widely adopted mini PCIe form-factor, it easily integrates into a wide variety of projects.
In addition to reliable 4G connectivity across the world, the Arduino Pro 4G Module guarantees compatibility with 2G and 3G networks."
SOLDERED ARD CONNECT - Dasduino CONNECT, ESP8266, Arduino IDE, without header
20.96 EUR
"The Dasduino Connect board offers an easy way to connect microcontrollers to the Internet. It is based on the ESP8266 microcontroller and is programmable with Arduino IDE. - 30 pins: digital and one analog
- USB-C connection for programming
- Voltage of 3.3 V with 5 V voltage regulator
- Supports Wi-Fi and TCP/IP protocol
The Dasduino Connect board makes it easy to integrate Wi-Fi functionality into microcontroller projects. The ESP8266 microcontroller on which the board is based offers extensive networking capabilities, including DNS support. Programming is done via the Arduino IDE, which makes it particularly user-friendly. The board measures 71 mm in length and 26 mm in width, making it compact and suitable for most projects. It is equipped with a USB-C connection for programming and power supply. In addition, the board has 30 pins, most of which are digital and one analog, which enables flexible use in different applications. Operation takes place at a voltage of 3.3 V, although a voltage regulator also supports 5 V. Wireless projects are possible thanks to the JST battery connector. The board contains a full-color RGB LED WS2812 for visual feedback.
Technical data
- ESP8266 microcontroller
- Voltage: 3.3 V (integrated voltage regulator for 5 V)
- GPIO pins: 9
- Charger for lithium battery
- Connections: USB Type-C (socket), easyC, JST battery connection
- Button: Reset, User
- CH340C USB-UART converter
- RGB WS2812B LED
- Dimensions: 71 mm x 26 mm
The Dasduino Connect board is a versatile and user-friendly solution for integrating Wi-Fi into microcontroller projects. It is available in three versions: without headers, with male headers or with female headers. These versions offer flexibility for integration into different projects and applications.
easyC
easyC is a robust connection system that optimizes the connection of microcontrollers, sensors and actuators using JST-SH compatible connectors (JST 4-pin). It offers solderless connections, serial connections of multiple devices (daisy-chaining), error-free design, parallel connection, universal compatibility and intermediate compatibility with Qwiic (Sparkfun connection system), simplifying prototype development. Further information on easyC can be found under ""Data sheets"".
External links
https://github.com/SolderedElectronics/Dasduino-Board-Definitions-for-Arduino-IDE
https://github.com/SolderedElectronics/Dasduino-CONNECT-hardware-design"
SOLDERED ARD SEN TEMP3 - Arduino - Temperature sensor, AD8495, analog
22.3 EUR
"Thermocouple sensor AD8495 analog K-type thermocouple amplifierThe AD8495 thermocouple sensor is a precise amplifier for K-type thermocouples with integrated cold junction compensation. It provides an analog output voltage that is directly proportional to the temperature and is ideal for microcontroller or embedded projects. Thanks to its high accuracy and simple integration, it is ideal for laboratory, industrial and educational applications.
- Amplifier for K-type thermocouples The integrated AD8495 chip processes the voltage of the thermocouple and provides a linear output signal.
- Cold junction compensation Integrated temperature compensation ensures stable measurement results without additional sensors.
- Wide temperature range Supports measurements from approximately -250 °C to +750 °C, depending on the thermocouple used.
- Analog output Provides a directly evaluable voltage signal for microcontrollers with analog input.
- Easy integration Operates with a supply voltage between 2.7 V and 36 V, compatible with Arduino, ESP32, Raspberry Pi and similar systems.
Technical data:
- Thermocouple type: K-type
- Output voltage: approx. 5 mV/°C at 5 V supply voltage
- Reference output: approx. 1.25 V at 0 °C
- Accuracy: ±1 °C typical (0-50 °C), ±2 °C at -25 °C to +400 °C
- Supply voltage: 2.7 V to 36 V
- Operating temperature: -25 °C to +400 °C (depending on thermocouple)
- Dimensions: approx. 20 × 16 × 2 mm
Areas of application:
- Temperature monitoring in heating systems, ovens and industrial systems
- Control and measurement in automation applications
- Integration in microcontroller and embedded systems
- Measurements in laboratories, workshops and training
- Projects with high temperature requirements
The AD8495 thermocouple sensor offers a precise, stable and easy-to-use solution for temperature measurement with K-type thermocouples for a wide range of applications.
External links
https://soldered.com/documentation/ad8495/overview/
https://github.com/SolderedElectronics/Soldered-Thermocouple-Sensor-AD8495-Library"
ALLNET ARD SENSOR KIT-2 - Arduino 40-in-1 sensor kit, sensors and modules
49.95 EUR
"This Arduino™ sensor kit contains 40 sensors and modules:- Joystick
- Relay
- Microphone
- 8 LED PCB
- Voltage regulator linear
- Flame
- Hall TTL
- Touch
- Temp I2C
- Buzzer
- Piezo Speaker 16R
- RGB-LED
- IR-optical detection
- Two color LED 5/3mm ""RED/GREEN
- Gas MQ-2
- Vibration
- Reed contact
- Heartbeat
- Flash LED
- Light barrier
- Button
- Shock
- Rotary encoder
- 5V Step-engine with driver PCB
- Tilt
- Photoresistor
- Temperature and humidity
- Potentiometer / analog hall
- 1W LED module WW
- Temperature 1Wire
- NTC treshold TTL / NTC 10k
- IR receiver 38KHz
- IR LED
- Motion detection PIR"
FREI ARD SEN UV - Arduino - Ultraviolet Sensor Module, 200 ... 370nm
25.87 EUR
Sensor module for detecting ultraviolet radiation (UV sensor) in the range between 200 - 370 nm.Technical dataOperating voltage: 3 ... 5 V DC
Output voltage: 0 ... 1 V DC
Operating current < 0.1 mA
Accuracy: 1 UV index
FREI ARD SEN COLOR - Arduino - Color Sensor Module, TCS3200D
18.84 EUR
"The module consists of an RGB sensor chip and four white LEDs. Almost all colours of the visible light can be measured.The integrated oscillator generates a square wave signal which is proportional to the intensity of the selected color.
Application examples are the reading of test strips, sorting by colors or recognition and calibration.
Technical features
- 2,7 .. 5,5 V supply voltage
- programmable colour selection
- dimensions: 28,4 x 28,4 mm
IDUINO ARD SEN WET1 - Arduino - Moisture sensor for soil moisture
10.92 EUR
"The soil moisture sensor with its two long probes offers an optimum result and is ideally suited for e.g. an automatic irrigation system. The two large exposed pads act as probes for the sensor and serve as a variable resistor. The more water there is in the soil, the better the conductivity between the pads, this leads to a lower resistance and a higher voltage at the output.Technical dataPower supply: 3.3 / 5 V DC
Current consumption less than 20 mA
Output signal 0 ~ 1.7 / 0 ~ 3 V (3.3 / 5 VDC)
Connections
- 1 Power supply
- 2 Ground
- 3 Analog sensor output
IDUINO ARD SEN2 KNOCK - Arduino - Hit sensor
11.6 EUR
"Der Hit Sensor registriert Schläge und gibt bei treffern ein Highlevel Signal am Ausgang aus. Diese Module werden auch als Klopfschalter bezeichnet und können unter anderem zur Berührungserkennung eingesetzt werden.Technische Daten
- kompatibel zu Arduino
- Betriebsspannung 5 V
- Maße: 28 x 15 mm
Anschlussbelegung
- 1 - digitaler Signalausgang
- 2 - Spannungsversorgung
- 3 - Masse
ARD SENSOR KIT - Arduino - Sensor Kit
46.02 EUR
DescriptionThe Arduino Sensor Kit is perfect for Makers or those who want to be. For this, the kit contains the 10 most popular sensors and actuators from the Grove ecosystem. Start right away: The modules are already connected via the boards, no soldering is necessary!The kit consists of a base shield which is used to connect the modules analog, digital or via the I²C interface. The connection and programming of the modules is explained step by step in 12 tutorials. The use with an Arduino Uno is recommended.
Scope of delivery and projects
• OLED Screen - for direct display of measurement results
• LED - switch on/off or dim
• Button - push button
• Potentiometer - adjustable resistor
• Buzzer - buzzer to generate binary tones
• Light Sensor - photo resistor for light intensity detection
• Sound Sensor - small microphone
• Air Pressure Sensor - measures the air pressure
• Temperature Sensor - measures humidity and temperature
• Accelerometer - accelerometer, which is also used for orientation
• 6x Grove cable
Further Informationhttps://sensorkit.arduino.cc
Languages
• English
• Spanish
• Chinese
NoteDelivery without Arduino Uno
FREI ARD U DISK RW - Arduino - U Disk RW Module, USB, CH375B
16.57 EUR
USB adapter for the Arduino based on the CH375B. The advantage of this adapter is that it can be operated in parallel as well as serial and adds a handy USB interface to your single board microcontroller.Technical features• chipset CH375B
• 5 V power supply
• 2x8 pin header
• USB-A socket
• status light
• integrated 122 MHz oscillator
FREI ARD MODULE SD - Arduino – SD card module
11.6 EUR
Simply add an SD card to expand your Arduino!Programming this module allows it to write to and read from SD cards, making it the ideal addition to your Arduino sensor module.
IDUINO DEBO LED 3W - Developer boards - LED module, 3 W
11.76 EUR
"3-W high-power LED module for direct connection to Arduino or other developer boards. This module offers you high brightness in a modular and easy-to-use module.A PWM input also offers the user easy adjustment of the brightness.
Special features
- Operating voltage: 5 V DC
- Power consumption: 3 W
- Light output: 200 lm
- Colour temperature: 6000 K
SOLDERED ARD GPS L86-M33 - Arduino - GPS module (GNSS), L83-M33
32.9 EUR
"The L86-M33 GNSS receiver enables precise positioning on earth for a wide range of applications. This module, compatible with Arduino (or a compatible board such as Dasduino), provides an efficient solution for asset tracking and portable devices.- Receives signals from GPS, GLONASS and Galileo.
- integrated EASY and AlwaysLocate for fast and accurate positioning.
- advanced internal logger LOCUS for storing routes and location data.
- Option to use with CR1220 battery for backup timing and GPS data.
- IPX connector for external antenna connection if required.
The L86-M33 GNSS receiver is characterized by its versatility as it receives signals from GPS, GLONASS and Galileo constellations. Thanks to the integration of EASY and AlwaysLocate, it offers fast and precise positioning, even in difficult environments. The internal LOCUS logger allows users to efficiently store routes and location data.
In addition, the module's breakout board provides a connection for a CR1220 battery, which acts as a backup for timing and GPS data. This ensures the continuity of operating data even in the event of a power failure or interruption. The ability to connect the module to an external antenna provides additional flexibility to achieve optimum performance even in weak signal environments.
Technical specifications
- GNSS: GPS + GLONASS
- Ceramic antenna on the circuit board
- Possibility of connecting the external antenna via the IPX connector
- Integrated circuit: L86-M33
- voltage: 3.3 V
- maximum update speed: 10 Hz
- Dimensions: 54 mm x 38 mm
External links
https://github.com/SolderedElectronics/GNSS-GPS-L86-M33-breakout-hardware-design
https://github.com/SolderedElectronics/Soldered-GNSS-L86-M33-Arduino-Library"
ARD SHD ASX00026 - Arduino Pro Shield - Portenta Vision with LoRa
77.96 EUR
Portenta Vision Shield: a production-ready solution for embedded ML applications in combination with the Arduino Portenta H7 boardThe Vision Shield is supplied with a 324 x 324 pixel camera module containing an ultra low power image sensor designed for always-on vision devices and applications. The highly sensitive image sensors can capture gestures, ambient light, proximity detection and object identification.
• professional image processing
• directed audio detection
• Ethernet or LoRa (depending on shield)
• JTAG
• for Arduino Portenta
Arduino has teamed up with OpenMV to offer a free license for the OpenMV IDE, which allows an easy entry into image processing with MicroPython. With OpenMV, all professionals, researchers and developers can develop cost-effective Python-based camera vision and audio applications. With the two digital microphones integrated in all directions you can record sounds to the videos, which can be stored on a MicroSD card.
Transfer data either via Ethernet or LoRa®.ARD SHD ASX00021 (Shield with LAN)
ARD SHD ASX00026 (Shield with LoRa)
Technical data• Camera: Himax HM-01B0 Camera module
• resolution: 320 x 320 active pixel resolution with support for QVGA
• Image sensor: Highly sensitive 3.6-µ-BrightSenseTM pixel technology
• Microphones: 2x MP34DT06JTR
• Connection: LoRa
• Interface: JTAG
• Dimensions (LxW): 66 x 25 mm
Scope of delivery
Portenta Shield with LoRa function
external links
https://openmv.io/pages/download
https://www.arduino.cc/pro/tutorials/portenta-h7/por-openmv-bt