ADAFRUIT DEBO AMP MIC2 - Developer Boards - Microphone Amplifier, MAX9814
21.01 EUR
Browse the detailed sheet with complete information, compare prices and find the features of PRODUCTNAME, proposed at the cost of PRICE CURRENCY; it classifies in the CATEGORY NAME; the sale is managed by SELLER NAME and the production is done by MANUFACTURER NAME.
"Electret Microphone Amplifier MAX9814
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
"Electret Microphone Amplifier MAX9814
- supply voltage: 2.7 - 5.5 V
- Frequency range: 20 Hz - 20 KHz
- automatic gain, selectable
- Dimensions: 26 x 14 mm
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
ADAFRUIT DEBO SOUND AMP1 - Developer Boards - Audio Amplifier, Class D, PAM8302A
15.43 EUR
"This super small mono amplifier is surprisingly powerful. It can deliver up to 2.5 watts for speakers with 4-8 ohms impedance.- filterless design with ferrite bead and capacitors from the output
- supply voltage: 5 V
- fixed 24 dB gain
- onBoard trimming potentiometer for controlling the input volume
- Protection against thermal overload, short-circuit and overcurrent
- Dimensions: 24 x 15 x 2 mm
ADAFRUIT DEBO AMP MIC - Development boards - Microphone Amplifier
19.61 EUR
Microphone amplifier MAX4466• adjustable gain via trimmer
• gain from 25x to 125x
• Supply voltage: 2.4 - 5 V
• 20 Hz - 20 kHz Microphone
JOY-IT DEBO HEATSINK2 - Development boards - active fan 20 x 20 mm
17.29 EUR
The Heatsink-2 is an active fan for single-board computers and other electronic projects. The fan, which measures just 2 x 2 cm, is virtually silent and is compatible with the Raspberry Pi, Banana Pi and many other single-board computers.
Thanks to its self-adhesive underbody, it can also easily be used for other cooling applications in electronics and modelling.
ADAFRUIT DEBO TEMP HUM2 - Developer Boards - Temperature and Humidity Sensor, Si7021
30.57 EUR
"Breakout board with temperature and humidity sensor Si7021- Sensor for Silicon Labs
- measures relative humidity with ±3 %
- temperature accuracy: ± 0.4°C
- temperature range: -10 to +85°C
- Dimensions: 15.3 x 17.8 x 3 mm
ADAFRUIT DEBO SOUND AMP3 - Developer boards - Audio amplifier, stereo, 20 W, class D, MAX97
35.74 EUR
"20 watts audio amplifier with up to 93% efficiency- Power off 4.5 - 14 V DC
- 20 mA Quiescent current
- maximum gain up to 29.5 dB
- 20 W stereo output (4 O)
- integrated click and pop noise suppression
- short circuit cut-off and overload protection
ADA TRKT 5V - Development boards - Adafruit Trinket 5V
18.63 EUR
"The Trinket is small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. Adafruit wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design. It's Adafruit lowest-cost arduino-IDE programmable board!The Attiny85 is a fun processor because despite being so small, it has 8K of flash, and 5 I/O pins, including analog inputs and PWM 'analog' outputs. We designed a USB bootloader so you can plug it into any computer and reprogram it over a USB port just like an Arduino. In fact we even made some simple modifications to the Arduino IDE so that it works like a mini-Arduino board. You can't stack a big shield on it but for many small & simple projects the Trinket will be your go-to platform.
Trinket does not have a Serial port connection for debugging so the serial port monitor will not be able to send/receive data
- ATtiny85 on-board, 8K of flash, 512 byte of SRAM, 512 bytes of EEPROM
- Internal oscillator runs at 8MHz, but can be doubled in software for 16MHz
- USB bootloader with a nice LED indicator
- Micro-USB jack for power and/or USB uploading
- ~5.25K bytes available for use (2.75K taken for the bootloader)
- Power with either USB or external output (such as a battery)
- On-board green power LED and red pin #1 LED
- Reset button for entering the bootloader or restarting the program
- 5x GPIO
- Hardware I2C / SPI capability for breakout & sensor interfacing.
- Mounting holes
- Dimensions: 31 x 15.5 x 5 mm "
ADAFRUIT DEBO MEMS MIC - Developer Boards - Microphones, SPH0645
19.61 EUR
Breakout board with I2S MEMS microphones- Digital output
- 50 Hz to 15 kHz
- I2S Interface
- • 1,6 ... 3,6 V Operating voltage
- SPH0645LM4H
ADAFRUIT DEBO TEMP HUM - Developer Boards - Temperature and Humidity Sensor, SHT31-D
28.04 EUR
"Breakoutboard with Temperature and Humidity Sensor Sensiron SHT31-D- Uses I2C address 0x44 or 0x45
- mitt relative humidity up to ±2%
- Accuracy: ±0.3°C
- 12.7 x 18 x 2.6 mm
ADAFRUIT DEBO LED MATRIX - Development boards - bicolor LED Square Matrix
30.57 EUR
"8x8 LED matrix- completely assembled
- two colors
- with 4-pin strip
- Dimensions: 33 x 41 x 4 mm
ADAFRUIT DEBO BOOST 1000 - Developer Boards - Powerboost 1000 Charger, TPS61090
35.74 EUR
"This small format DC/DC boost converter module can be powered by any 3.7 V Li-Ion / LiPo battery and converts battery power to 5.2 V DC to keep your 5 V projects running.- charging current: max. 1000 mA
- with low-battery detection
- 2 A internal switch
- Dimensions: 22 x 37 x 7 mm
ADAFRUIT DEBO MOTODRIVER3 - Development boards - DC/Stepper Motor Driver Breakout Board
19.24 EUR
"Breakout board with DC and stepper motor driverWith this board 2-4 solenoid valves, two DC motors or one stepper motor can be driven.
- Supply voltage: 4.5 - 13.5 V
- each breakout chip contains two complete (four half) H-bridges
- two digital inputs per H-bridge
- Dimensions: 110 x 68 mm
ADAFRUIT DEBO USB SERIAL - Developer Boards - USB to Serial Adapter, FT232H
24.21 EUR
"This board is similar to other USB to serial adapters, but additionally includes many common protocols like SPI, I2C, serial UART, JTAG! - FT232H chip and one EEPROM for onboard configuration
- 20x GPIO
- Dimensions: 38 x 23 x 4 mm
ADAFRUIT DEBO MICROSD - Development boards - Breakout-Board for MicroSD-Cards
20.39 EUR
"Breakout-Board für MicroSD-Karten- On-Board 5 bis 3 V Regler für 150 mA
- 3 V Pegelverschiebung
- Maße: 32 x 25 x 4 mm
ADAFRUIT DEBO CELL ONOFF - Development boards - Coin Cell Breakout with On-Off Switch
14.81 EUR
"This small board is ideal for powering projects with very low power consumption or adding a battery backup.- soldered button cell battery holder CR2032
- On and off switches
- Distance between mounting holes: 22 x 22 mm
ADAFRUIT DEBO SOUND AMP2 - Developer boards - Audio amplifier, stereo, 3.7 W, class D, MAX9
22.3 EUR
"This super small stereo amplifier is surprisingly powerful. It can deliver up to 3.7 watts for speakers with an impedance of 3-8 ohms.- exceeds the EMI limit unfiltered with up to 30 cm of speaker cable
- supply voltage: 2.7 - 5.5 V
- selectable amplification via 5 pins
- Dimensions: 28 x 24 x 3 mm
JOY-IT "DEBO LCD 10 HDMI - Development boards - LCD 10"" touchscreen display, HDMI"
171.14 EUR
"LCD touch display 10"" for developer boardsThe new 10"" touch display with metal housing from Joy-IT is a robust all-rounder and suitable for a wide range of applications. It is characterized by its robust workmanship. The matt black metal housing complements perfectly with the hard coating of the display (H3). Due to the integrated stereo speakers and the included remote control, the display is also ideal for multimedia use or presentations in sales rooms.
The display also works with conventional PC systems via the HDMI and VGA connection.
Small highlights are the BNC and AV connections, which are also available for connecting camera systems.
Tinker in your workshop on your new open source project with the support of Raspberry and Co. and at the same time have the possibility to perform finest soldering work with a camera microscope and work with millimeter accuracy.
Equipment features:
- 10.1"" IPS Touch Display
- 1280 x 800 pixels
- Contrast 800:1
- incl. SBC holder and stand
- 1x HDMI, 1x VGA, 1x AV, 1x BNC,2x USB
- 12 V, 2000 mA
- brightness: 350 cd/m2, 16.7 million colours
- L x W x D (mm): 244 x 163 x 32
- Weight: 1,2 kg
- Metal housing, glare protection, hard coating (H3)
- Integrated stereo speakers (power 2 watts)
- incl. remote control
The scope of delivery includes an adapter board with which you can attach all common single-board computers directly to the monitor. Due to the additional USB connection you do not need a separate power supply for the operation with the SBC."
FREI DEBO LED NP8 2 - Development boards - NeoPixel stick with 8 WS2812 5050 RGB LEDs
12.79 EUR
This small, intelligent RGB LED stick with 8 LEDs of type WS2812 can be controlled with a microcontroller, for example an Arduino. Several sticks can be connected to each other.Technical data
• Operating voltage: 4 ... 7 V
• LED dimensions: 5 x 5 x 1.5 mm
• dimensions: 54 x 10.5 x 3.15 mm
Note: Compatible with Adafruit NeoPixel Library: https://github.com/adafruit/Adafruit_NeoPixel
ADA CIRCUIT - Development boards - Adafruit Circuit Playground Classic
33 EUR
"Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in? Circuit Playground is here - and it's the best way to practice programming on real hardware with no soldering or sewing required!Circuit Playground features an ATmega32u4 processor, just like our popular Flora. The board's also round and has alligator-clip pads around it so you don't have to solder or sew to make it work. You can power it from USB, a AAA battery pack, or with a Lipoly battery (for advanced users). Just program your code into the board then take it on the go!
- ATmega32u4 Processor, running at 3.3 V and 8 MHz
- MicroUSB port for programming and debugging with Arduino IDE
- USB port can act like serial port, keyboard, mouse, joystick or MIDI
Circuit Playground has built-in USB support. Built in USB means you plug it in to program it and it just shows up. All you really need is a Micro-B data/sync USB cable - not included! With the new 1.6.4+ Arduino IDE, it takes only a few seconds to add support.
- 10 x mini NeoPixels, each one can display any color
- 1 x Motion sensor (LIS3DH triple-axis accelerometer with tap detection, free-fall detection)
- 1 x Temperature sensor (thermistor)
- 1 x Light sensor (phototransistor)
- 1 x Sound sensor (MEMS microphone)
- 1 x Mini speaker (magnetic buzzer)
- 2 x Push buttons, left and right
- 1 x Slide switch
- 8 x alligator-clip friendly input/output pins
- Includes I2C, UART, and 4 pins that can do analog inputs/PWM output
- All 8 pads can act as capacitive touch inputs
- Green ""ON"" LED so you know its powered
- Red ""#13"" LED for basic blinking
- Reset button
ADAFRUIT DEBO SHD MOTOR - Developer Boards Shield - Servo, 16 Channel, 12 Bit, PCA9685
32.69 EUR
"PWM driver Shield with integrated clock- 6 address selection pins
- adjustable frequency PWM up to approx. 1.6 kHz
- 12 bit resolution for each output
- configurable push-pull or open-drain output
- Dimensions: 54 x 70 x 3 mm
ADAFRUIT DEBO LOGIC 4CH - Developer boards - bidirectional logic level converter, 4-channe
15.43 EUR
"Bidirectional Logic Level Converter BSS138- 4-channel
- I2C-safe
ADAFRUIT DEBO TOUCH SENS - Developer boards - board for capacitive touch sensors, MPR121
21.01 EUR
"You can connect up to 12 individual touch sensors to this board.- flashing LED when touch is detected
- Dimensions: 33 x 19 x 2 mm
2 pin headers included in the scope of delivery"
ADAFRUIT DEBO POWER1 - Developer boards - Charger for Li-Ion / LiPo batteries, MCP73831
18.21 EUR
"Charger for charging single Li-Ion and LiPo batteries- pre-assembled
- input voltage: 5 V
- 100 mA charging current, adjustable to 500 mA by re-soldering
- with JST cable
- Dimensions: 12.5 x 8 x 30 mm
ADAFRUIT DEBO POWER4 - Developer boards - Charger for Li-Ion / LiPo batteries, miniUSB,
27.31 EUR
"Charger for charging single Li-Ion and LiPo batteries with 3.7 or 4.2 V- pre-assembled
- input voltage: up to 5 V via miniUSB
- 500 mA Charging current, adjustable to 100 to 1000 mA by re-soldering
- with JST cable "
ADAFRUIT DEBO LED 5 WT - Development boards - LED Sequins, 5x white
15.43 EUR
"5 small LED Squins, each with 2 contacts- Ruby White - 5-pack
- smaller and therefore easier to use in many projects
- shows a single color without digital control
- Dimensions: 4 x 9 x 2 mm
ADAFRUIT DEBO POWER2 - Developer boards - Charger for Li-Ion / LiPo batteries with micr
19.61 EUR
"Charger for charging individual Li-Ion and LiPo batteries with 3.7 or 4.2 V- pre-assembled
- Input voltage: 5 V via microUSB
- 100 mA charging current, adjustable to 500 mA by re-soldering
- with JST cable
- Dimensions: 19 x 2 x 21 mm
Please note:
Battery not included in scope of delivery!"
ADAFRUIT DEBO SENS ACC2 - Developer Boards - Accelerometer Board, MMA8451Q
21.01 EUR
"This accelerometer board can be used with phones, tablets, smart watches and many more.- simple use with Arduino or another microcontroller
- installed tilt / position detection
- Wide range of use from 2 to 8 g
- very precise with built-in 14-bit ADC
- Dimensions: 21 x 18 x 2 mm
ADAFRUIT DEBO LED NP24 - Developer Boards - NeoPixel Ring with 24 WS2812 RGB LEDs
27.78 EUR
"24 ultrabright LED Neopixels arranged in a circle.- 24 individually addressable RGBs
- with integrated drivers
- constant current: 18 mA
- voltage range: 4 - 7 V
- outside diameter: 65.6 mm
- inside diameter: 52.3 mm
ADAFRUIT DEBO MICROUSB - Development boards - USB Micro-B Breakout Board
12.01 EUR
"You can connect this board to a microcontroller to expand it with a USB port- pre-assembled
- Dimensions: 20 x 10 x 4 mm
ADAFRUIT DEBO FEATHER RTC - Development boards - Adalogger FeatherWing, RTC + SD-Addon
22.3 EUR
"The Adafruit Feather are a complete line of development boards from Adafruit that are both standalone and stackable. They're able to be powered by lipo batteries for on-the-go use or by their micro-USB plugs for stationary projects. Feathers are flexible, portable, and as light as their namesake.This FeatherWing will make it real easy to add datalogging to any of our existing Feathers. You get both an I2C real time clock (PCF8523) with 32KHz crystal and battery backup, and a microSD socket that connects to the SPI port pins (+ extra pin for CS). A CR1220 coin cell is required to use the RTC battery-backup capabilities!
- 50.8 x 22.9 x 1.6 mm
JOY-IT DEBO POE INJECT - Development boards - PoE injector 10/100/1000 Mbps
33.52 EUR
"With this injector you can supply your Raspberry Pis or other developer boards with power via an Ethernet cable.- Transmission rate: 10/100/1000 Mbps
- Input: RJ45 network + 230 V
- Output: RJ45 network + PoE
- maximum power output: 30 W
- Cable length: up to 100 m
- PoE protocol: 802.3af/at
- Operating temperature: 0 to +40 °C
- Dimensions: 145 x 60 x 40 mm
Note: optimal usability with the POE microUSB Poweradapter: DEBO POE ADAPTER"
ADA FB M0 BP - Development boards - Adafruit Feather M0 Basic Proto
33 EUR
"The Adafruit Feather are a complete line of development boards from Adafruit that are both standalone and stackable. They're able to be powered by lipo batteries for on-the-go use or by their micro-USB plugs for stationary projects. Feathers are flexible, portable, and as light as their namesake.At the Feather M0's heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip.
- ATSAMD21G18 @ 48 MHz with 3.3 V logic/power
- 256 KB of FLASH + 32 KB of RAM
- No EEPROM
- 32.768 KHz crystal for clock generation & RTC
- 3.3 V regulator with 500 mA peak current output
- USB native support, comes with USB bootloader and serial port debugging
- 20x GPIO
- Hardware Serial, hardware I2C, hardware SPI support
- PWM outputs on all pins
- 6x 12-bit analog inputs
- 1x 10-bit analog ouput (DAC)
- Built in 100 mA lipoly charger with charging status indicator LED
- red LED for general purpose blinking
- 4 mounting holes
- Reset button
The Feather M0 Basic Proto has some extra space left over, so we give you a tiny little prototyping area. If you just need to attach a button or sensor, you may be able to skip out on a breadboard and wire it directly on there.
Comes fully assembled and tested, with a USB bootloader that lets you quickly use it with the Arduino IDE. We also toss in some header so you can solder it in and plug into a solderless breadboard. Lipoly battery and USB cable not included (but we do have lots of options in the shop if you'd like!)"
ADAFRUIT DEBO SENS ACC - Developer boards - accelerometer, 3-axis, LIS3DH
16.82 EUR
"3-axis accelerometer LIS3DH- three-axis detection
- selectable scale length
- interrupt output
- multiple data rate options: 1 Hz to 5 KHz
- Dimensions: 20 x 20 x 2.6 mm
FREI DEBO XH-W1209 C - Development boards - housing for XH-W1209, transparent
11.81 EUR
"Acrylic housing to fit thermostat module XH-W1209- Made from high-quality acrylic
- Colour: transparent
- Supplied with screws and nuts
The thermostat module is not supplied!"
ADAFRUIT DEBO LED NP16 - Developer Boards - NeoPixel Ring with 16 WS2812 RGB LEDs
23.8 EUR
"16 ultrabright LED Neopixels arranged in a circle.- 16 individually addressable RGBs
- voltage range: 4 - 7 V
- outside diameter: 44.5 mm
- inside diameter: 31.7 mm
ADAFRUIT DEBO HAPTICMOTO - Developer boards - haptic motor control, DRV2605L
21.01 EUR
"This board has been specially developed for haptic motors, such as sum and vibration motors- Control via the I2C interface
- Supply voltage: 3 or 5 V
- has STEMMA QT connectors
- Dimensions: 25.8 x 17.8 x 4.6 mm
ADA FB 32U4 BFLE - Development boards - Adafruit Feather 32u4 Bluefruit LE
44.58 EUR
"The Adafruit Feather are a complete line of development boards from Adafruit that are both standalone and stackable. They're able to be powered by lipo batteries for on-the-go use or by their micro-USB plugs for stationary projects. Feathers are flexible, portable, and as light as their namesake.- ATmega32u4 @ 8 MHz with 3.3 V logic / power
- 3.3 V regulator with 500 mA peak current output
- USB native support, comes with USB bootloader and serial port debugging
- 20x GPIO
- Hardware Serial, hardware I2C, hardware SPI support
- 8x PWM pins
- 10x analog inputs
- Built in 100mA lipoly charger with charging status indicator LED
- red LED for general purpose, blinking
- 4 mounting holes
- Reset button
- 51.2 x 22.8 x 8 mm
Built-in nRF51822 Bluetooth Low Energy module"
ADAFRUIT DEBO LED NP12 - Developer Boards - NeoPixel Ring with 12 WS2812
22.87 EUR
"12 ultrabright LED Neopixels arranged in a circle.- 16 individually addressable RGBs
- voltage range: 4 - 7 V
- outside diameter: 36.8 mm
- inside diameter: 23.3 mm
FREI DEBO 4NUM DIS3 - Development boards - 4-digit 7-segment display
12.74 EUR
4-digit 7-segment displaySpecifications• 4-bit digital tube display module, 8550 3-pin and parallel drive
• digital tube type: 0.36 inch
• operating voltage: 3.3 ... 5V
• mounting holes
• dimensions (L x W x H): 48 x 20 mm
JOY-IT "DEBO OLED5 0,96 - Development boards - OLED display, 0.96"", 128x64 pixels, blue"
15.63 EUR
"The compact 0.96-inch (approx. 2.44-cm) OLED display is the ideal solution for your projects. Thanks to its flexible control via I2C or SPI, it can be easily integrated with Arduino, Raspberry Pi and other microcontrollers or single board computers. OLED technology enables brilliant, high-contrast images without the need for backlighting, because each pixel itself lights up. This not only ensures excellent image quality, but also very low power consumption.
This display allows you to implement your ideas efficiently and impressively.
Specifications
- Screen size: 0.96"" (2.44 cm)
- Power supply: 3.3 - 5 V
- Number of pixels: 128x64
- Background colour: black
- Display colour: blue
- Compatible with Raspberry, Arduino
- Dimensions: 27 x 28 x 11 mm