FREI ARD MIC MODUL5 - Arduino - Microphone module, LM386, analog
13.04 EUR
Examine the detailed sheet with complete information, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the production is done by MANUFACTURER NAME and the sale is managed by SELLER NAME.
Sound Sensor Module Audio detection module with LM386 amplifier chip
The sound sensor module is used to detect sounds and is based on the LM386 audio amplifier chip. It amplifies the sound signals detected by the microphone and outputs analog voltage values that can be processed by microcontrollers such as Arduino. The module is ideal for simple noise detection and sound evaluation projects.
Technical data:
Areas of application:
The Sound Sensor Module is a simple, effective solution for sound detection and ideal for beginners in electronics and Arduino projects.
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Sound Sensor Module Audio detection module with LM386 amplifier chip
The sound sensor module is used to detect sounds and is based on the LM386 audio amplifier chip. It amplifies the sound signals detected by the microphone and outputs analog voltage values that can be processed by microcontrollers such as Arduino. The module is ideal for simple noise detection and sound evaluation projects.
- Sensitive microphone input Picks up sound signals from the environment and converts them into electrical signals.
- Integrated LM386 amplifier Amplifies weak input signals for a stable analog output.
- Adjustable sensitivity The noise detection threshold can be adjusted via a potentiometer.
- Compatible with Arduino Direct connection via VCC, GND and A0 possible, easy integration into microcontroller projects.
- Simple wiring Only three wires required, quick commissioning for learning and DIY projects.
Technical data:
- Operating voltage: 5 V DC
- Signal output: analog (OUT)
- Amplifier chip: LM386
- Connection: 3-pin (VCC, GND, OUT)
- Microphone type: Electret condenser microphone
- Compatibility: Arduino, ESP32, Raspberry Pi and others
- Dimensions: approx. 35 × 16 × 8 mm
Areas of application:
- Sound-activated controls
- Light or motor activation for sound events
- Environmental and noise monitoring
- Acoustic detection in learning and electronics projects
- Sound level demonstrations in the education sector
The Sound Sensor Module is a simple, effective solution for sound detection and ideal for beginners in electronics and Arduino projects.
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
FREI ARD MIC MODUL1 - Arduino - Microphone module, analog
13.15 EUR
The sound detector is based on a microphone and a power amplifier and can be used to detect the sound level in the environment. The sensor receives the signal through both a digital and an analog output.The sensitivity can be adjusted with the potentiometer and the LEDs mounted on the PCB indicate the power and the compressor output.
IDUINO ARD MIC MODUL2 - Arduino - Microphone module, analog
12.01 EUR
Small microphone module for Arduino, analogueSpecification
• power supply: 5 V / 3.3 V
• analog output
• high sensitivity microphone
• power indicator light
• frequency response range: 50 Hz - 20 KHz
• impedance: 2.2 kOhm
• Sensitivity: 48 - 66 dB
• Polar pattern: universal
• Operating temperature: -40 ... +85 C
• Operating humidity: 30 - 90%.
• Hole for mounting screw 3 mm.
• dimensions (L x W x H): 40 x 15 x 10 mm
IDUINO ARD MIC MODUL4 - Arduino - Microphone module, analog
12.01 EUR
Large microphone moduleThis is a highly sensitive sound detection module with two output signal pins.
D0: When it detects a sound up to a certain threshold, it can output a high or low level.
A0: It can output the output voltage signal of the microphone in real time.
VELLEMAN ARD SENS MIK-S - Arduino - microphone sound sensor
15.43 EUR
Very sensitive module with 2 outputs.AO - analog input, real-time output voltage signal of the microphone.
DO - digital output depends on the volume and the set limit.
Specifications
• voltage: 3.3 to 5 VDC
• outputs: 1x analog + 1x digital
• mounting: 1 mounting hole (3 mm)
• 2 LEDs: 1x power supply LED + 1x comparator output LED
• frequency range: 50 Hz ... 20 KHz
• Impedance: 2.2 KOhm
• Sensitivity: 48 - 66 dB
• Operating temperature: -40 ... +85 °C
• Dimensions (L x W x H): 44 x 15 x 10 mm
FREI ARD SHD EXP MEGA - Arduino Shield - Expansion Board Sensor V2, Mega 2560
14.29 EUR
Expansion board for an Arduino Mega2560, ideal to equip it with many sensors. The board routes the analog and digital ports of the Arduino to corresponding 3-pin connectors, where many sensors or actuators can be connected directly.In addition, the board forwards important functions such as the status LED or the reset button, so that they remain easily accessible.
In addition, the board comes with its own terminal strip, which can be used to supply the connected devices with power. You only have to remove the jumper next to it.
Technical data
• has a power LED and a D13 display
• has a reset button
• extends the digital and analog interface to 3-pin
• has a serial communication interface
• extends the ICSP and SPI interface
• terminal block for power supply
FREI ARD SEN COLOR - Arduino - Color Sensor Module, TCS3200D
18.84 EUR
The module consists of an RGB sensor chip and four white LEDs. Almost all colours of the visible light can be measured.The integrated oscillator generates a square wave signal which is proportional to the intensity of the selected color.
Application examples are the reading of test strips, sorting by colors or recognition and calibration.
Technical features
- 2,7 .. 5,5 V supply voltage
- programmable colour selection
- dimensions: 28,4 x 28,4 mm
FREI ARD SHD XBEE IO - Arduino Shield - Xbee I/O expansion board
14.5 EUR
Xbee I/O expansion boardExtended 14 digital IO ports (12 servo interface) and power supply
• 6 analog IO ports and power supply
• 1 digital port for external power supply
• automatic switching between digital port and integrated external power supply
• 1 input terminal for external power supply + input pins
• RS485 interface
• reset button
• interface for xbee/Bluetooth Bee Bluetooth wireless modules
• APC220 / Bluetooth V3 interfaces for Bluetooth wireless data transmission
• IIC / I2C / TWI interfaces
• 3.3 V output connector
• interface for SD card module
FREI ARD SEN UV - Arduino - Ultraviolet Sensor Module, 200 ... 370nm
25.87 EUR
Sensor module for detecting ultraviolet radiation (UV sensor) in the range between 200 - 370 nm.Technical data
Operating voltage: 3 ... 5 V DC
Output voltage: 0 ... 1 V DC
Operating current < 0.1 mA
Accuracy: 1 UV index
ALLNET ARD SENSOR KIT-2 - Arduino 40-in-1 sensor kit, sensors and modules
49.95 EUR
This Arduino™ sensor kit contains 40 sensors and modules:- Joystick
- Relay
- Microphone
- 8 LED PCB
- Voltage regulator linear
- Flame
- Hall TTL
- Touch
- Temp I2C
- Buzzer
- Piezo Speaker 16R
- RGB-LED
- IR-optical detection
- Two color LED 5/3mm ''RED/GREEN
- Gas MQ-2
- Vibration
- Reed contact
- Heartbeat
- Flash LED
- Light barrier
- Button
- Shock
- Rotary encoder
- 5V Step-engine with driver PCB
- Tilt
- Photoresistor
- Temperature and humidity
- Potentiometer / analog hall
- 1W LED module WW
- Temperature 1Wire
- NTC treshold TTL / NTC 10k
- IR receiver 38KHz
- IR LED
- Motion detection PIR
IDUINO ARD SEN LDR - Arduino - Photo Resistor Module (LDR)
11.55 EUR
Light dependent resistor (LDR) as module for easy use with the Arduino and for measuring the light intensity.Technical data
- Operating voltage: 5 V
- 3-pin output (signal, plus, ground)
- Dimensions: 25 x 15 mm
An analog real-time voltage signal is output via the signal pin.
FREI ARD SEN HX711 - Arduino - Weight Pressure Sensor, HX711
13.04 EUR
Electronic scale module HX711The change in resistance caused by a change in weight is output by a converter circuit via TTL 232. An A/D converter with 24-bit accuracy is used for processing, the update interval is 80 Hz (every 0.0125 seconds).
Technical data
• Operating voltage: 5 V DC
• Operating current: < 10 mA
• Dimensions: 38 x 21 x 10 mm
• refresh rate: 80 Hz
FREI ARD KIT SENSOR03 - Arduino - Sensor-Kit 24in1 Multicolored
30.31 EUR
Sensor Kit 24in1 MulticoloredContent
• rotation potentiometer module
• Button Module
• flux LED module
• SMD RGB light module
• analog temperature sensor
• Straw Hat LED Light Module
• Sound sensor
• Infrared receiver module
• ball switch module
• vibration switch modu
• knock module
• light sensor
• mercury switch module
• infrared transmitter module
• temperature sensor LM35
• 18B20 temperature sensor
• Collision switch module
• Pluggable unit RGB LED light
• Active buzzer module
• Encoder module
• grayscale sensor
• passive buzzer module
• relay module
• obstacle avoidance module 4 x 3-pole cable (21 cm) 10 x 20 mm dupont cable (20 cm)
JOY-IT ARD VIB 01 - Arduino - Piezo vibration sensor
12.74 EUR
Analog piezoelectric vibration sensor with ceramic chipDescription
This module is equipped with a ceramic vibration sensor which outputs an analog signal when vibration occurs. The sensor can measure vibrations of different strengths. Vibrations acting on the sensor generate a voltage signal depending on the strength of the vibration due to the piezoelectric effect. This allows you to monitor vibrations in your plant, for example.
Specifications
• piezoelectric ceramic chip
• analog interface
• -10 ... +70°C
• dimensions (LxWxH): 36 x 20 x 14 mm
IDUINO ARD KIT SENSOR04 - Arduino - Sensor Kit 37in1
39.51 EUR
Sensor Kit 37 in1Scope of delivery
• joystick module
• relay module
• microphone module (large)
• Microphone Module (small)
• tracking module
• obstacle avoidance module
• flame sensor
• magnetic hall sensor
• Touch Sensor
• SMD RGB Led Module
• digital temperature sensors
• buzzer module
• two-color LED module (5 mm)
• bicolor LED module (3 mm)
• reed switch module
• passive buzzer/sounder
• RGB LED module
• LED Module
• mini reed switch module
• heart rate sensor
• seven color flash
• laser module
• tactile switch
• rotary coding module
• magic light cup module
• shock module
• mercury tilt module
• ball switch module
• light dependent resistor module
• hall effect sensor
• temperature and humidity module
• analog temperature sensor
• digital temperature sensor
• magnetic Bihor sensor
• IR transmitter
• optical broken module
• Hit Sensor Module
SEEED GRV SOUND SENS - Arduino - Grove Sound Sensor, LM386
15.84 EUR
DescriptionThe Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment. The value of output can be adjusted by the potentiometer.
Features
• Grove compatible interface
• Wide supply voltage range: 4V-12V
• Low quiescent current drain: 4mA
• 2.0cm x 2.0cm twig module
• Minimum external parts
Applications Ideas
• Simple microphone
• Sound detection
For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.
FREI ARD U DISK RW - Arduino - U Disk RW Module, USB, CH375B
16.57 EUR
USB adapter for the Arduino based on the CH375B. The advantage of this adapter is that it can be operated in parallel as well as serial and adds a handy USB interface to your single board microcontroller.Technical features
• chipset CH375B
• 5 V power supply
• 2x8 pin header
• USB-A socket
• status light
• integrated 122 MHz oscillator