REICHELT IE: Solar power
The Best
The SmartSolar charge controller will even recharge a severely discharged battery. It can operate with a battery voltage as low as 0 volts, provided the cells are not permanently sulfated or otherwise damaged.
MPPT: Ultra-fast Maximum Power Point Tracking
By continuously monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that all available energy is actually being drawn from the panels and stored. The benefit of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing.
Remote monitoring and control
You can remotely control and monitor the extensive features of your SmartSolar MMPT charger by attaching a Bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your system is connected to the Victron Remote Management Internet Portal (VRM), you have full access to your MPPT anytime, anywhere. Both services are available free of charge.
Load output
The 'Intelligent Load Output' function prevents damage caused by using ''dead'' batteries. You can configure the voltage at which the SmartSolar will disconnect a load - preventing excessive discharge of your batteries. And here's the kicker: the SmartSolar will attempt to recharge the battery to 100% every day. If this is not possible - e.g. in bad weather - it raises the disconnect voltage value every day until it is successful.
Technical data:
Model: MPPT 100/20
Battery voltage: 12/ 24/ 48 V
Nominal charging current: 20 A
Nominal PV power (12 V): 290 W
Nominal PV power (24 V): 580 W
Nominal PV power (48 V): 1160 W
Short circuit current: max. 20 A
PV open circuit voltage: max. 100 V
Peak efficiency: 98%
Bluetooth interface compatible with: iOS/ Andoid/ MacOS/ Windows
Top Pick
The integrated Bluetooth in the SmartSolar series is the wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets and other devices.
An overview of the most important technical features
- Max. 15 A charging current, suitable for 12 V and 24 V batteries
- Nominal PV power for 12 V systems: 220 W
- Nominal PV power for 24 V systems: 440 W
- 15 A load output
- High peak efficiency of 98%
- Freely programmable battery charging algorithm (via the free Victron Connect app)
- Programmable light dimming functions
- Ultra-fast Maximum Power Point Tracking
Excellent
The SmartSolar charge controller will even recharge a severely discharged battery. It can operate with a battery voltage as low as 0 volts, provided the cells are not permanently sulfated or otherwise damaged.
MPPT: Ultra-fast Maximum Power Point Tracking
By continuously monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that all available energy is actually being drawn from the panels and stored. The benefit of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing.
Remote monitoring and control
You can remotely control and monitor the extensive features of your SmartSolar MMPT charger by attaching a Bluetooth® dongle and pairing it with your smartphone or other device via VictronConnect. If your system is connected to the Victron Remote Management Internet Portal (VRM), you have full access to your MPPT anytime, anywhere. Both services are available free of charge.
Load output
The 'Intelligent Load Output' function prevents damage caused by using ''dead'' batteries. You can configure the voltage at which the SmartSolar will disconnect a load - preventing excessive discharge of your batteries. And here's the kicker: the SmartSolar will attempt to recharge the battery to 100% every day. If this is not possible - e.g. in bad weather - it raises the disconnect voltage value every day until it is successful.
Technical data:
Model: MPPT 100/50
Battery voltage: 12/ 24 V
Nominal charging current: 50 A
Nominal PV power (12 V): 700 W
Nominal PV power (24 V): 1400 W
Short circuit current: max. 60 A
PV open circuit voltage: max. 100 V
Peak efficiency: 98%
Bluetooth® interface compatible with: iOS/ Andoid/ MacOS/ Windows
Recommended
Small dimensions, great performance
- Up to 445 W peak power, 22.3% module efficiency with high density interconnect technology
- Improved performance in high temperature environments due to improved thermal behavior
- Bifacial design - GLAS/GLAS module for higher yields
Universally applicable
- Universal solution for residential and commercial roofs
- Ideal for balcony power plants or solar fences
- High compatibility for existing inverters
- Flexible installation solutions for system use
High reliability
- 5,400 Pa snow load (test load)
- 4,000 Pa wind load (test load)
Technical features:
Nominal power: 445 Wp
Voltage in MPP-(U)MPP: 44.3 V
Current in MPP-(I)MPP: 10.05 A
Open circuit voltage: 52.6 V
Short-circuit current: 10.71 A
Module efficiency: 22.3%
Design:
Cell arrangement: 144 cells
Module dimensions: 1762 x 1134 x 30 mm
Weight: 21 kg
Glass: 1.6 mm, high transmission
Encapsulation: EVA/POE
Back: black and white
Frame 30 mm anodized (aluminium)
Junction box: IP 68
Connection: TS4 / MC4 EVO2
Cable: 4.0 mm²
Scope of delivery: 4x TRINA TSM-445
Shipping:
Attention! This item will be shipped by a forwarding agent. (DE)
A phone number is required for shipping. Please enter it in the CheckOut
Featured
Small dimensions, great performance
- Up to 445 W peak power, 22.3% module efficiency with high density interconnect technology
- Improved performance in high temperature environments due to improved thermal behavior
- Bifacial design - GLAS/GLAS module for higher yields
Universally applicable
- Universal solution for residential and commercial roofs
- Ideal for balcony power plants or solar fences
- High compatibility for existing inverters
- Flexible installation solutions for system use
High reliability
- 5,400 Pa snow load (test load)
- 4,000 Pa wind load (test load)
Technical features:
Nominal power: 445 Wp
Voltage in MPP-(U)MPP: 44.3 V
Current in MPP-(I)MPP: 10.05 A
Open circuit voltage: 52.6 V
Short-circuit current: 10.71 A
Module efficiency: 22.3%
Design:
Cell arrangement: 144 cells
Module dimensions: 1762 x 1134 x 30 mm
Weight: 21 kg
Glass: 1.6 mm, high transmission
Encapsulation: EVA/POE
Back: black and white
Frame 30 mm anodized (aluminium)
Junction box: IP 68
Connection: TS4 / MC4 EVO2
Cable: 4.0 mm²
Scope of delivery: 2x TRINA TSM-445
Shipping:
Attention! This item will be shipped by a forwarding agent. (DE)
A phone number is required for shipping. Please enter it in the CheckOut
Alternative
Key product features of the BlueSolar 75/15 15 A 12 V 24 V MPPT
- Ultra-fast latest-generation MPP tracker ensures the maximum yield even in overcast skies
- Integrated VE.Direct data communication port for connection. For communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel
- 12 V 24 V systems are possible
- Nominal charging current of 15 A
- 220 W maximum PV power at 12 V, 440 W at 24 V systems
- Load output with 15 A power and automatic load cut-off in the event of imminent battery undervoltage (deep discharge protection)
- Integrated protection against battery reverse polarity
- Multi-stage and adaptive charging algorithm
- Programmable battery charging algorithm
- Integrated Battery Life Algorithm extends the life of your batteries if it is active and all loads run through the load output on the controller
- Day/night timer and light suppression option
Key product features of the BlueSolar 75/10 10 A 12 V 24 V MPPT
- Ultra-fast latest-generation MPP tracker ensures the maximum yield even in overcast skies
- Integrated VE.Direct data communication port for connecting, for communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel
- 12 V 24 V systems are possible
- Nominal charging current of 10 A
- 145 W maximum PV power at 12 V, 290 W at 24 V systems
- Load output with 10 A power and automatic load cut-off in the event of imminent battery undervoltage (deep discharge protection)
- Integrated protection against battery reverse polarity
- Multi-stage and adaptive charging algorithm
- Programmable battery charging algorithm
- Integrated Battery Life Algorithm extends the life of your batteries if it is active and all loads run through the load output on the controller
- Day/night timer and light suppression option
MPPT: ultra-fast maximum power point tracking
By continuously monitoring the voltage and current output of your solar (PV) module, the MPPT technology ensures that all the available energy can be taken from the modules and stored. The advantage of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing.
Features
- Suitable for 12 V/24 V/48 V systems
- Short-circuit-proof load output
- Intelligent battery management with Battery Life
- Programmable battery charging algorithm
- Day/night timer and light suppression option
- Intelligent VE.Direct data communication port for connection to additional devices such as Bluetooth Smart Dongle or GX Color Control Panel
- Integrated protection against output short circuit/overtemperature
Kleine Maße, große Leistung
- Bis zu 445 W Spitzenleistung, 22,3% Modulwirkungsgrad mit high density interconnect technology
- Verbesserte Leistung in Umgebungen mit hohen Temperaturen durch verbesserten thermischen Verhalten
- Bifaziale Bauweise - GLAS/GLAS Modul für höhere Erträge
Universal einsetzbar
- Universelle Lösung für Wohn- und Gewerbedächer
- Ideal für Balkonkraftwerke oder Solarzäune
- Hohe Kompatibilität für bestehende Wechselrichtern
- Flexible Installationslösungen für den Systemeinsatz
Hohe Zuverlässigkeit
- 5.400 Pa Schneelast (Testlast)
- 4.000 Pa Windlast (Testlast)
Technsiche Features:
Nominalleistung: 445 Wp
Spannung im MPP-(U)MPP: 44,3 V
Strom im MPP-(I)MPP: 10,05 A
Leerlaufspannung: 52,6 V
Kurzschlusstrom: 10,71 A
Modulwirkungsgrad: 22,3%
Bauform:
Zellanordnung: 144 Zellen
Modulmaße: 1762 x 1134 x 30 mm
Gewicht: 21 kg
Glas: 1,6 mm, High Transmission
Verkapselung: EVA/POE
Rückseite: schwarz-weiß
Rahmen 30 mm eloxiert (Aluminium)
Anschlussdose: IP 68
Anschluss: TS4 / MC4 EVO2
Kabel: 4,0 mm²
Lieferumfang: 4x TRINA TSM-445
Versand:
Achtung! Dieser Artikel wird per Spedition versendet. (DE)
Für den Speditionsversand wird eine Rufnummer benötigt. Bitte im CheckOut hinterlegen
The Reolink Solar Panel 2 provides a sustainable and cost-effective power source for your solar-powered Reolink camera.
This powerful solar panel provides a reliable power supply that continuously charges your camera's battery for uninterrupted surveillance.
With the 4 meter long connection cable, you can easily connect the solar panel to your camera.
This allows you to optimally position the weatherproof solar panel for maximum sunlight exposure.
With the flexible 360° wall bracket, you can place the solar panel in the best position to achieve the highest energy gain.
Compatible with:
- Argus 3 2K
- Argus 3 Pro
- Argus 3 Ultra
- Argus 3 Plus
- Reolink Go
- Reolink Go Plus
- Reolink Go EXT
- Reolink Go PT
- Reolink Go PT Plus
- Reolink Go PT Ultra
- Argus PT Ultra
- Argus 2
- Argus Eco
- Argus 2E
- Argus Pro
- Argus PT 2K
- Argus PT
- Argus PT Plus
- Reolink Duo
- Reolink Duo 2
- Reolink Duo 4G
- Reolink Duo 2 LTE
Note: The following cameras only work with the Reolink Solar Panel 2:
- Reolink TrackMix
- Reolink TrackMix LTE
- Reolink Duo 2
- Reolink Duo 2 LTE
- Reolink Go PT Ultra
- Argus PT Ultra
Package Contents:
- Reolink solar panel 2
- Connection cable 4 m
- Mounting bracket
- Retaining strap
- Screw package
- Quick guide
- Template
- Converter for type C to micro USB
The solar trickle charger is suitable for 12-V batteries in cars, motorcycles, caravans, tractors etc. The compact design with suction cups is intended for mounting on car windows. The integrated diode prevents back discharge of the battery at night. With battery terminals and 12-V cigarette lighter plug.
Features:
- Solar trickle charger, suitable for 12-V batteries
- Compact design with suction cups for mounting on glass
- Integrated diode prevents back discharge at night
- With battery terminals and 12-V cigarette lighter plug
Technical data:
- Output: max. 10 W
- Voltage: 17.9 V
- No-load voltage: 22.41 V
- Plug type: SAE plug for adapter cable battery or cigarette lighter
- Operating temperature range: -20 - +60°C
- Dimensions: 375x253x15 mm
- Weight: 500 g
Included in delivery:
- Solar trickle charger
- 4x suction cups
- Battery terminal adapter
- Cigarette lighter adapter
- User manual
- Small size 169 x 116 x 2.3 mm
- Flexible mount for optimal alignment
- Max. Output power: 3 Watt
- Voltage: 6.0 V (max.)
- Long cable (3 meters)
This Nedis solar panel with micro USB is designed to charge the Wi-FiCBO30WT battery camera.
This allows you to install your camera anywhere within Wi-Fi range.
The extra long cable, small size and flexible mount provide great flexibility.
Thanks to the extra long cable, you can position the camera in the shade and place the panel within 3 meters in a sunny location.
The solar panel only produces power when the sun is directly shining, i.e. not when the sky is cloudy.
But with the camera's long battery life, you'll never be in trouble.
So a little sun now and then is enough to keep the camera running.
Note that the solar panel is currently not compatible with other cameras. Although the solar panel is suitable for outdoor use, the USB device is not waterproof.
Bei der Entwicklung dieses Sets stand neben der Langlebigkeit auch die Nutzung qualitativ hochwertigster Einzelkomponenten im Fokus.
So verfügt das kräftige Solarpanel über eine laminierte Oberfläche und ist somit gegen Umwelteinflüsse bestens geschützt. Der LiFEPO4 Akku besticht durch extreme Zyklenfestigkeit und ist mit über 3000 Lade- und Entladezyklen auf Langlebigkeit getrimmt. Die Steuerplatine trennt zuverlässig bei drohender Tiefentladung die LED vom Akku und schont somit das Gesamtsystem.
- Platine: 52 x 29 mm, fertig bestückt
- Akku: 600 mAh / 3,2 Volt mit Stecker
- Solarpanel: 75 mAh @ 3.5 Volt mit Stecker, Größe: 60 x 45 mm
- LED: 5 mm kaltweiß 5000-6000K, bereits montiert am Stecker, 5 mm warmweiß 3000K zum montieren
- Schalter: bereits montiert am Stecker
- Akkubefestigung: 2 x Kabelbinder
- Anschlussart: verpolungssicher
Das Gerät ist für Batteriesysteme mit 24 V Spannung und die Batterietypen AGM, GEL, FLD und LiFePO4 geeignet. Die integrierte PFC-Technologie erreicht einen hohen Leistungsfaktor von AC-DC-Ladungen und reduziert die Netzkapatzitätsnutzung
- Vollständig intelligente digitale Energiespeicherausrüstung
- Fortschrittliche MPP-Tracking-Technologie
- Vollständig digital gesteuerte AC-DC Lademodule
- Hohe Ausgangsspannungsstabilität
- Drei Lademodi und zwei Ausgangsmodi
- Nicht-Batterie-Modus: gleichzeitiges Laden mit Solar (Standard) und Netzversorgung (Assist)
- LCD-Display zur Anzeige verschiedener Systemparameter
- Mehrere LED-Anzeigen zur dynamischen Statusanzeige
- Unterstützt Kalt- und Softstart
- Volldigitale Doppel-Closed-Loop-Steuerung (Transferschalter)
- RS485 isolierte Kommunikationsschnittstelle
- Optionaler BMS-Link-Anschluss
Verschiedene Modi für vielfältige Anwendungsbereiche
Das Gerät verfügt insgesamt über drei Lademodi. Es kann der Vorrang für Solarbetrieb eingestellt werden, eine Kombination aus Netz- und Solarbetrieb oder der reine Solarbetrieb. Bei den AC-Ausgangsmodi kann zwischen Versorgungs- und Wechselrichterpriorität gewählt werden. Um die Solarenergienutzung zu maximieren kann der Benutzer die Energiequellen nach dem tatsächlichen Bedarf auswählen und das Versorgungsunternehmen flexibel als Ergänzung nutzen. Die IC-Einheit kann die garantierte Stromversorgungsrate des Systems erhöhen, was für Solarenergie-, Versorgungs-/Ölgenerator-Hybridsysteme geeignet ist.
- Geeignet für Batteriespannung: 24 V/DC
- Batterie Eingangsspannungsbereich: 21,6 - 32 V/DC
- Schutzart: IP30
- Rel. Luftfeuchtigkeit: <95% (N.C.)
- Betriebsumgebungstemperatur: -20°C - +50°C (volle Ein- und Ausgangsleistung)
- Abmessungen: 642,5 x 381,6 x 149 mm
- Gewicht: 19 kg
Wechselrichter mit 3000 W Dauerleistung
Das DC-AC-Wechselrichtermodul basiert auf einem vollständig digitalen und intelligenten Design. Es verwendet die fortschrittliche SPWM-Technologie, gibt eine reine Sinuswelle aus und wandelt 24 V/DC in 220/230 V/AC um. Das Modul ist geeignet für AC-Lasten von Haushaltsgeräten, Elektrowerkzeugen, elektronischen Audio- und Videogeräten und viele weitere Anwendungsbereiche. Dank der innovativen Spannungs-, Strom- und Leistungsregelung mit mehreren Regelkreisen verfügt das Gerät...
With the Aqiila foldable solar panel you can power your devices with free solar energy. Perfect for any adventure thanks to the compact, foldable design. The lightweight solar device is portable and is easily secured to a rucksack using the carabiner hooks provided. The Aqiila foldable solar device offers numerous benefits that make it indispensable for every traveller and adventurer. Thanks to the monocrystalline SunPower cells, you can enjoy
fast and efficient energy absorption, even in low sunlight. With an output of 21 W and a charging profile of 18 W PD 3.0, your devices or power banks are charged quickly and efficiently.
Technical data
Output: 21 W
Charging profile: 18 W PD 3.0
IP classification: IP67
Output ports: USB-C
LED display: yes
Weight: 600 g
Dimensions, folded: 155 x 165 x 35 mm
Dimensions, unfolded: 155 x 1080 x 5 mm
Included in delivery
Aqiila foldable solar panel
2x carabiner hook
USB-C to USB-A adapter
User manual
Sun Peak SPR solar modules have back-contact silicon solar cells with a unique structure that makes them up to 20% more efficient. They are visually appealing and ideal for off-grid applications.
- Photovoltaic modules with back-contact silicon solar cells
- Over 20% efficiency
- For 12 V DC to 48 V DC batteries in off-grid systems
- Highly reliable thanks to high-quality materials
- Reduced weight and surface area
Technical data:
Output: 110 W
Voltage: 12 V DC
Cells: 32
Technology: mono
Aluminium frame: black
Connection cable: 900 mm/4 mm²
Connection plug: Standard4
Dimensions: 1037 x 527 x 35 mm (L x W x H)
Weight: 7.0 kg
If the item is not showing as ''in stock'', delivery may take between 7 and 14 working days
- 4 efficient solar cells with up to 80 watts of power
- 10 DC adapters
- Quick charging with PD45 W & QC 3.0
- 4 fold-out feet for good stability
- Foldable to conveniently take anywhere
- Integrated carrying handle and carrying case for cables
- Connection cable: 1.2 m
- Dimensions (folded): 398 x 358 x 20 mm
- Dimensions (opened): 1580 x 398 x 5 mm
- Weight: 2.3 kg
Technical specifications:
Solar panel: 80 W
Number of panels: 4x20 W
Outputs:
DC: 18 V/4.5 A max.
Type-C: 5 V/3 A, 9 V/3 A, 12 V/3 A, 15 V/3 A (PD 45 W)
USB 01: 5 V/3.3 A, 9 V/2 A, 12 V/1.5 A (QC3.0)
USB 02: 5 V/2 A
The lighthouse can be used very well as a night light or as a ''luminous decorative object'' where night accents are desired.
- all wooden parts prefabricated
- with longLife battery and processor-controlled charging technology
- from 12 years
- Height: 20 cm
ATTENTION!
Not suitable for children under 3 years, danger of suffocation due to small parts that can be swallowed.
Solar power REICHELT IE Best Products
The latest battery of the market-leading manufacturer with now 2.4 kWh per module has again a battery management system (BMS) built into each module and therefore offers a lot of security. Internally, the individual cells are thus monitored and balanced against overvoltage, overtemperature, deep discharge, etc. protected. The battery is compatible and certified with many available inverters.
- Extremely cycle resistant - over 6000 cycles at 95% DoD
- More usable energy content than the predecessor model US2000
- Lifetime over 10 years
- Absolutely intrinsically safe lithium technology
- Compatible with many available inverters
- Automatic address setting when connected in multi-groups
- High charge and discharge capacity possible
- Integrated BMS
- Very high storage density - light weight and compact design
- Easy installation thanks to modular design
- Absolutely maintenance-free and durable
- Built-in soft-start function capable of reducing the current surge when the inverter is started from the battery
- Dual active protection at BMS level
- Supports WakeUp by 5-12V signal from RJ45 port
- Pre-charge function to protect the ESS system from overvoltage function
Battery management system in each module
The battery management system integrated into each module protects each installed battery cell from harmful influences over the entire life of the module and effectively prevents premature failure.
Protection against:
- Deep discharge and overcharge
- overvoltage during charging
- excessive currents during charging and discharging
- over- and undertemperature
- short circuit and reverse polarity
Constant monitoring of the individual cell voltages (cell balance).
Modular design
The system has a modular design and can be configured precisely to the desired storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) accumulator and an integrated BMS.
High cycle life
The extremely high cycle life of the installed LiFePo4 cells make Pylontech US2000C modules the optimal storage solution for photovoltaic systems. Regardless of whether the solar system is grid-tied or stand-alone, Pylontech storage offers several advantages over typical lead-acid batteries and other lithium technologies.
Technical Data
- Battery type: Lithium iron phosphate (LiFePo4)<...
Compared to the predecessor model from the HM range, the HMS-1600 offers greater safety for roof-mounted solar power units thanks to quick shutdown and insulated transformers. The new Sub-1G wireless solution enables more stable communication with the Hoymiles DTU gateway.
Non-stop solar power
Captures free, clean solar energy and provides non-stop power for your battery-powered Tapo cameras (Tapo C425, Tapo C420 and Tapo C400) to ensure they keep you safe all year round.
Up to 4.5W charging power
Made of high quality monocrystalline silicon cells, Tapo A200 captures abundant solar energy and efficiently provides continuous power supply.
IP65 weatherproof
Provides excellent waterproof and dustproof performance for outdoor use.
4m charging cable
Offers flexible installation with a 4m (13ft) charging cable.
360° adjustable mount
Adjust your solar panel to the perfect angle to capture enough light.
Package contents:
- Tapo A200 solar panel
- Adjustable mounting bracket
- 4 m/13 ft charging cable
- Mounting dowel
- Mounting screws
- Mounting template
- Waterproof seal
- Quick Start Guide
The Technaxx TX-214 solar module is easy to transport. Ideal for various uses such as camping and in the garden etc. In addition, you can use this solar panel to charge your car or camper van battery. Excellent for lead-acid and lithium batteries. The supplied charging regulator is already pre-assembled on the back of the solar module. You can easily set up the module thanks to the fold-out support.
Features:
- Mounted solar panel, easy to transport - stand-alone solution
- Ideal for in the garden, camping etc. and charges car or camper van batteries
- Excellent for charging DC12-V supply batteries
- Suitable for lead-acid and lithium batteries
- Charging regulator with LCD display, pre-mounted on the back (removable)
- Four-stage PWM charge management
- Two USB outputs, ideal for charging devices such as smartphones, tablets etc.
- Efficient solar panel with an efficiency of up to 16.69%
- Excellent performance in low irradiance environments
- Convenient set-up thanks to the fold-out support
The TX-203 from Technaxx is the perfect microinverter for your balcony photovoltaic power module. The compact, lightweight inverter (weighing only 2 kg) is suitable for solar power production with one solar panel, having a power output up to 300 W. As with all other Technaxx microinverters, it is ideal for long operating hours and a wide range of PV module applications, as its start-up voltage is very low and the DC input range of the operating voltage (16 - 60 V) is very broad. Technaxx microinverters are designed to operate at full power at ambient temperatures of up to +65°C. The microinverter housing is designed for outdoor installation and complies with the IP67 (waterproof) protection rating.
Features:
- Simply install, connect and get started
- Lightweight and compact microinverter
- Direct mounting on the rail system or panel frame
- Ideal for balcony power stations and mini-solar systems
- Mains-connected system, for feeding into the 230-V household mains via socket
- MC4 connector to connect the solar panel
- Max. power of the solar module: 240 - 380 W
- Integrated MPPT charging regulator for solar modules: incredibly efficient power output
The Reolink Solar Panel 2 provides a sustainable and cost-effective power source for your solar-powered Reolink camera.
This powerful solar panel provides a reliable power supply that continuously charges your camera's battery for uninterrupted surveillance.
With the 4 meter long connection cable, you can easily connect the solar panel to your camera.
This allows you to optimally position the weatherproof solar panel for maximum sunlight exposure.
With the flexible 360° wall bracket, you can place the solar panel in the best position to achieve the highest energy gain.
Compatible with:
- Argus 3 2K
- Argus 3 Pro
- Argus 3 Ultra
- Argus 3 Plus
- Reolink Go
- Reolink Go Plus
- Reolink Go EXT
- Reolink Go PT
- Reolink Go PT Plus
- Reolink Go PT Ultra
- Argus PT Ultra
- Argus 2
- Argus Eco
- Argus 2E
- Argus Pro
- Argus PT 2K
- Argus PT
- Argus PT Plus
- Reolink Duo
- Reolink Duo 2
- Reolink Duo 4G
- Reolink Duo 2 LTE
Note: The following cameras only work with the Reolink Solar Panel 2:
- Reolink TrackMix
- Reolink TrackMix LTE
- Reolink Duo 2
- Reolink Duo 2 LTE
- Reolink Go PT Ultra
- Argus PT Ultra
Package Contents:
- Reolink solar panel 2
- Connection cable 4 m
- Mounting bracket
- Retaining strap
- Screw package
- Quick guide
- Template
- Converter for type C to micro USB
Hoymiles HMT inverter system accessories.
- A T-node with AC cable is required for each HMT inverter
- For each inverter system (from a microinverter upwards), at least one end cap and one unlocking aid are required
- The disconnection aid and connection cap can also be purchased separately
Example HMT accessory set:
One PV system with 4x HMT 2250 (all interconnected)
4x T-nodes with AC cable
1x unlocking aid
1x disconnection aid (optional)
1x end cap
Features
- Cell efficiency of over 22%
- Monocrystalline solar cells with ETFE protection
- Layers of flexible EVA and durable fibreglass
- Waterproof to IP67 to protect against dirt, dust and water
- Versatile and compatible with various solar connector types
- Designed for EcoFlow Delta power stations and compatible third-party generators
- without PV and AC cables
The EcoFlow STREAM is an intelligent 800-W microinverter that has been specially developed for the use of balcony power plants. It enables solar power to be fed directly into the home network and offers maximum flexibility for modern energy projects.
Benefits:
- Plug & Play - easy commissioning without electrical installation
- Direct feed into the home network
- Optimised for use with products from the EcoFlow STREAM series
- Control and monitoring via the EcoFlow app
- High efficiency for modern balcony solar systems
- Scalable and flexibly expandable
Full performance in the STREAM system
In combination with other EcoFlow products from the STREAM series, you can create a modular, intelligent solar system that optimises your own consumption and helps to reduce electricity costs in the long term. The use of additional STREAM components enables enhanced system performance, including memory integration, smart control and maximum energy yield.
USB-C Anschluss 5 Volt, ca. 150 mA zur Stromversorgung über Steckernetzteil, Powerbank oder PC/Notebook. OLED-Display 0.96'' (2,44 cm) zur Anzeige der aktuellen Leistung, sowie der Tages- und Gesamtwerte (abhängig von der verwendeten Software).
- DX-DTU im Kunststoff-3D-Gehäuse mit On-Board-Antennen
- Reichweite im Gebäude ca. 15 - 20 Meter, im Freien wesentlich mehr
- Mit 0.96'' Oled Display (SSD1306)
- Gehäusefarben können je nach Verfügbarkeit variieren
- Gehäusegröße: 101 x 53 x 20 mm
- Gewicht: ca. 50g
Kompatibel mit folgenden Wechselrichtern:
Hoymiles HM-300
Hoymiles HM-350
Hoymiles HM-400
Hoymiles HM-600
Hoymiles HM-700
Hoymiles HM-800
Hoymiles HM-1000
Hoymiles HM-1200
Hoymiles HM-1500
Lieferumfang:
DX-DTU-Platine im 3D-Druck-Gehäuse, getestet und mit openDTU Firmware programmiert.
Wichtig:
nicht vom Hersteller Hoymiles! Es ist nur kompatibel. Kenntnisse zur Beschreibung des ESP sind hilfreich.
Gateway für die Übertragung der Funksignale von bis zu 10 Hoymiles-Wechselrichtern (HM/DUO, 2.4GHz, HMS/HMT/DUO, 868MHz) ins WLAN-Netz. Hardware-kompatibel mit der Open-Source Software OpenDTU. Anzeige der Daten mit dem WEB-Browser per PC oder Smartphone. Über MQTT ist die Anbindung an Smarthome-Systeme möglich.
Professionell gefertigt in Industriequalität, keine Freiluftverdrahtung von Modulen.
- DX-DTU im Kunststoff-3D-Gehäuse und 2 oder 3 externen Antennen
- High-Power NRF24L01+ PA-Modul (HM/DUO) oder EBYTE NRF24L01+ PA+LNA-Modul (nur HM)
- EBYTE E49-900M20S - Modul mit CMT2300A im abgeschirmten Gehäuse (HMS/HMT/DUO)
- Reichweite im Gebäude ca. 30 - 40 Meter, im Freien wesentlich mehr
- Mit 2.42'' (6,15cm) OLED Display
- 2 LEDs zur Statusanzeige
- USB-C Anschluss 5 Volt, ca. 150 mA zur Stromversorgung über Steckernetzteil, Powerbank oder PC/Notebook.
- Gehäusefarben können je nach Verfügbarkeit variieren
- Gehäusegröße: 101 x 53 x 31 mm (ohne Antennen), 101 x 85 x 31 mm (mit Antennen)
- Gewicht: ca. 65 g
Software:
- OpenDTU Software installiert
Kompatibel mit folgenden Wechselrichtern:
Hoymiles HM-Serie, Hoymiles HMS-Serie, Hoymiles HMT-Serie
Diese DTU funktioniert nicht mit den W-Versionen der Wechselrichter (z.B. HMS-800W).
Better protection compared to the smaller models in the BlueSolar MPPT series
Compared to the 75/10, 75/15 and 100/15 model, the BlueSolar 100/30 MPPT has an overheating protection with a shut-down function and automatic restart after reaching a normal operating temperature.
OLED-Display 0.96'' (2,44 cm) zur Anzeige der aktuellen Leistung, sowie der Tages- und Gesamtwerte (abhängig von der verwendeten Software). Die Ausrichtung des Displays ist im Einstellmenü bei der Software OpenDTU möglich. Professionell gefertigt in Industriequalität, keine Freiluftverdrahtung von Modulen. ESP32, NRF24L01+ und E49-900M20 - Modul, CH340 als USB/Seriell-Wandler fest auf der Platine verlötet.
- DX-DTU (HM + HMS/HMT) im Kunststoff-3D-Gehäuse und 3 externen Antennen
- High-Power NRF24L01+ PA-Modul
- EBYTE E49-900M20S - Modul mit CMT2300A im abgeschirmten Gehäuse
- Reichweite im Gebäude ca. 30 - 40 Meter, im Freien wesentlich mehr
- Mit 0.96'' Oled Display (SSD1306)
- 2 LEDs zur Statusanzeige
- USB-C Anschluss 5 Volt, ca. 150 mA zur Stromversorgung über Steckernetzteil, Powerbank oder PC/Notebook.
- Gehäusefarben können je nach Verfügbarkeit variieren
- Gehäusegröße: 101 x 53 x 25 mm (ohne Antennen), 101 x 85 x 25 mm (mit Antennen)
- Gewicht: ca. 60 g
Die angegebene Reichweite ist nur ein Richtwert und ist abhängig vom Aufstellort, von der Beschaffenheit des Gebäudes sowie von der Anzahl der trennenden Wände.
Software:
- OpenDTU Software installiert
Kompatibel mit folgenden Wechselrichtern:
Hoymiles HM-Serie, Hoymiles HMS-Serie, Hoymiles HMT-Serie, TSUN TSOL-M350 (Seriennummern mit ''11'' beginnend), TSUN TSOL-M800 (Seriennummern mit ''11'' beginnend), TSUN TSOL-M1600 (Seriennummern mit ''11'' beginnend)
Diese DTU funktioniert nicht mit den W-Versionen der Wechselrichter (z.B. HMS-800W).
For the parallel connection of two solar panels.
Included in delivery
1 × DJI Power solar panel MC4 parallel connector (male)
1 × DJI Power solar panel MC4 parallel connector (female)
Technical data
Length: 30 cm
Compatibility
IBCPOWER 200-W foldable solar panel
LINKSOLAR 200-W flexible solar panel
Gateway für die Übertragung der Funksignale von bis zu 10 Hoymiles-Wechselrichtern (HM/DUO, 2.4GHz, HMS/HMT/DUO, 868MHz) ins WLAN-Netz. Hardware-kompatibel mit der Open-Source Software OpenDTU. Anzeige der Daten mit dem WEB-Browser per PC oder Smartphone. Über MQTT ist die Anbindung an Smarthome-Systeme möglich.
Professionell gefertigt in Industriequalität, keine Freiluftverdrahtung von Modulen.
- DX-DTU im Kunststoff-3D-Gehäuse und 2 oder 3 externen Antennen
- High-Power NRF24L01+ PA-Modul (HM/DUO) oder EBYTE NRF24L01+ PA+LNA-Modul (nur HM)
- EBYTE E49-900M20S - Modul mit CMT2300A im abgeschirmten Gehäuse (HMS/HMT/DUO)
- Reichweite im Gebäude ca. 30 - 40 Meter, im Freien wesentlich mehr
- Mit 2.42'' (6,15cm) OLED Display
- 2 LEDs zur Statusanzeige
- USB-C Anschluss 5 Volt, ca. 150 mA zur Stromversorgung über Steckernetzteil, Powerbank oder PC/Notebook.
- Gehäusefarben können je nach Verfügbarkeit variieren
- Gehäusegröße: 101 x 53 x 31 mm (ohne Antennen), 101 x 85 x 31 mm (mit Antennen)
- Gewicht: ca. 65 g
Software:
- OpenDTU Software installiert
Kompatibel mit folgenden Wechselrichtern:
Hoymiles HM-Serie
Diese DTU funktioniert nicht mit den W-Versionen der Wechselrichter (z.B. HMS-800W).
- 1x Schraube M8x35 DIN 912, A2, schwarz brüniert
- 1x Klemmstein mit O-Ring
- 1x O-Ring
Achtung!
Die brünierte Oberfläche der Schraube kann auf Grund eines Eisenoxid-Überschusses farblich zwischen braun und schwarz variieren. Dies ist ausschließlich ein optischer Aspekt und beeinträchtigt nicht die Funktionalität.
(Schnittkante silber)
- 1x Schraube M8x35 DIN 912, A2, schwarz brüniert
- 1x Klemmstein mit O-Ring
- 1x O-Ring
Achtung!
Die brünierte Oberfläche der Schraube kann auf Grund eines Eisenoxid-Überschusses farblich zwischen braun und schwarz variieren. Dies ist ausschließlich ein optischer Aspekt und beeinträchtigt nicht die Funktionalität.
Features high-quality EPDM tape, incl. 4 thin sheet metal screws.
The short rails are pre-drilled and the underside is provided with 3 mm-EPDM tape for optimum leak tightness.
The thin-plate screws are approved for sheet steel from 0.5 to 1.25 mm and for sheet aluminium from 0.5 to 1.5 mm.
- Height: 15 mm
- Length: 396 mm
- Module arrangement: Vertical
- Screws: 6.0 × 25 (A2)
- Material: Aluminium, EN AW-6063 T66
Features high-quality EPDM tape, incl. 2 thin sheet metal screws.
The short rails are pre-drilled and the underside is provided with 3 mm-EPDM tape for optimum leak tightness.
The thin-plate screws are approved for sheet steel from 0.5 to 1.25 mm and for sheet aluminium from 0.5 to 1.5 mm.
- Height: 22 mm
- Length: 164 mm
- Modular arrangement: horizontal
- Screws: 6.0 x 25 (A2)
- Material: aluminium EN AW-6063 T66
The trapezoidal rail is supplied with an EPDM seal already attached. The mounting rail can be used for trapezoidal sheets with a maximum profile height of 360 mm. In accordance with DIN 1090-4, the sheet thickness of the trapezoidal sheet should be at least 0.75 mm. For sheet thicknesses under 0.75 mm, check if hanger bolts may be used as an alternative.
- Length: 400 mm
- Thickness: 1.6 mm
- Weight/piece: 0.38 kg
- Weight/m: 0.921 kg/m
- Length x width x height: 400 x 90 x 31.6 mm
- Upper duct: mounting of photovoltaic module (M8)
- Module mounting: Vertical
- Max. profile height: 360 mm
- Material: aluminium EN AW-6060 T66
Suitable self-tapping screw for fastening:
Self-tapping screw with hexagon head and sealing washer, 6.3x25 mm
USB-C connector 5 volts, approx. 150 mA for power supply via plug-in power supply, power bank or PC/notebook. OLED display 0.96'' (2.44 cm) for displaying the current power, as well as the daily and total values (depending on the software used).
Compatible with the following inverters:
Hoymiles HM-300
Hoymiles HM-350
Hoymiles HM-400
Hoymiles HM-600
Hoymiles HM-700
Hoymiles HM-800
Hoymiles HM-1000
Hoymiles HM-1200
Hoymiles HM-1500
Scope of delivery:
DX-DTU board in aluminum case, tested and programmed with openDTU firmware.
Important:
From the manufacturer Hoymiles! It is only compatible. Knowledge to describe the ESP is helpful.
