VICTRON ENERGY VE MPPT 100/30 - Solar charge controller,100/30MPPT
153.18 EUR
Detailed sheet with complete information, compare prices and find the features for PRODUCTNAME, at the price of PRICE CURRENCY; classified in the category CATEGORY NAME; this product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
A solar charger is supplied with energy via solar modules and then stores it in batteries. Using the latest and fastest technology, SmartSolar maximizes this energy generation and intelligently directs it to fully charge the batteries in as short a time as possible. The SmartSolar maintains the functionality of the battery and thus extends its service life.
The SmartSolar charge controller even recharges a heavily discharged battery. It can operate at a battery voltage of only 0 volts, provided the cells are not permanently sulphated or otherwise damaged.
MPPT: Ultra-fast maximum Power point Tracking
By continuously monitoring the voltage and current output of your Solar(PV) modules, the MPPT technology ensures that all the energy that is available is actually taken from and stored in the modules. The advantage of this is most noticeable when the sky is partially covered and the light intensity changes constantly.
Remote monitoring and control
You can remotely control and monitor the rich features of your SmartSolar MMPT charger by attaching a Bluetooth dongle and pairing it with your smartphone or other device via VictorConnect. When your facility is connected to the Victron Remote Management Internet Portal (VRM), you have full access to your MPPT at any time and from anywhere. Both services are available free of charge.
Load Output
The Intelligent Load Output feature prevents damage caused by the use of ''empty'' batteries. You can configure the voltage at which the SmartSolar will disconnect a load - this will prevent excessive discharge of your batteries. And here comes the highlight: The SmartSolar tries to charge the battery back to 100% every day. If this is not possible - e.g. in bad weather - it raises the voltage value for separation daily until it is successful.
Technical Data:
Model: MPPT
Battery voltage: 12/ 24 V.
Rated charging current: 30 A.
Nominal PV power (12 V): 440 W.
Nominal PV power (24 V): 880 W.
Short-circuit current: Max. 35 A.
PV no-load voltage: 100 V max.
Peak Efficiency: 98%
Bluetooth interface compatible with: IOS/ Andoid/ MacOS/ Windows
EAN: 8719076040170
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
A solar charger is supplied with energy via solar modules and then stores it in batteries. Using the latest and fastest technology, SmartSolar maximizes this energy generation and intelligently directs it to fully charge the batteries in as short a time as possible. The SmartSolar maintains the functionality of the battery and thus extends its service life.
The SmartSolar charge controller even recharges a heavily discharged battery. It can operate at a battery voltage of only 0 volts, provided the cells are not permanently sulphated or otherwise damaged.
MPPT: Ultra-fast maximum Power point Tracking
By continuously monitoring the voltage and current output of your Solar(PV) modules, the MPPT technology ensures that all the energy that is available is actually taken from and stored in the modules. The advantage of this is most noticeable when the sky is partially covered and the light intensity changes constantly.
Remote monitoring and control
You can remotely control and monitor the rich features of your SmartSolar MMPT charger by attaching a Bluetooth dongle and pairing it with your smartphone or other device via VictorConnect. When your facility is connected to the Victron Remote Management Internet Portal (VRM), you have full access to your MPPT at any time and from anywhere. Both services are available free of charge.
Load Output
The Intelligent Load Output feature prevents damage caused by the use of ''empty'' batteries. You can configure the voltage at which the SmartSolar will disconnect a load - this will prevent excessive discharge of your batteries. And here comes the highlight: The SmartSolar tries to charge the battery back to 100% every day. If this is not possible - e.g. in bad weather - it raises the voltage value for separation daily until it is successful.
Technical Data:
Model: MPPT
Battery voltage: 12/ 24 V.
Rated charging current: 30 A.
Nominal PV power (12 V): 440 W.
Nominal PV power (24 V): 880 W.
Short-circuit current: Max. 35 A.
PV no-load voltage: 100 V max.
Peak Efficiency: 98%
Bluetooth interface compatible with: IOS/ Andoid/ MacOS/ Windows
EAN: 8719076040170
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
VICTRON ENERGY VE SCC020030200 - BlueSolar MPPT 100/30 30 A solar charge controller
128.88 EUR
The Victron MPPT 100/30 (MPN SCC020030200) is part of the large family of BlueSolar MPPT charge controllers and, like its older siblings, it boasts ultra-fast power tracking and can therefore boost the yield of your solar system. Apart from the higher charging and PV power, this Blue sets itself apart even more from the lower models. This is because the 100/30 controller has the ability to fully program and store various charging algorithms. The self-created algorithms can then be selected directly via a switch wheel on the housing. The load output directly on the controller is no longer available from this model onwardsBetter protection compared to the smaller models in the BlueSolar MPPT series
Compared to the 75/10, 75/15 and 100/15 model, the BlueSolar 100/30 MPPT has an overheating protection with a shut-down function and automatic restart after reaching a normal operating temperature.
VICTRON ENERGY VE MPPT 100/20 - Solar charge controller, 100/20 MPPT
110.32 EUR
A solar charger is supplied with energy via solar panels and then stores it in batteries. Using the latest and fastest technology, the SmartSolar maximizes this energy harvesting and intelligently directs it to fully charge the batteries in as little time as possible. The SmartSolar maintains the battery's functionality, extending its life.The SmartSolar charge controller will even recharge a severely discharged battery. It can operate with a battery voltage as low as 0 volts, provided the cells are not permanently sulfated or otherwise damaged.
MPPT: Ultra-fast Maximum Power Point Tracking
By continuously monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that all available energy is actually being drawn from the panels and stored. The benefit of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing.
Remote monitoring and control
You can remotely control and monitor the extensive features of your SmartSolar MMPT charger by attaching a Bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your system is connected to the Victron Remote Management Internet Portal (VRM), you have full access to your MPPT anytime, anywhere. Both services are available free of charge.
Load output
The 'Intelligent Load Output' function prevents damage caused by using ''dead'' batteries. You can configure the voltage at which the SmartSolar will disconnect a load - preventing excessive discharge of your batteries. And here's the kicker: the SmartSolar will attempt to recharge the battery to 100% every day. If this is not possible - e.g. in bad weather - it raises the disconnect voltage value every day until it is successful.
Technical data:
Model: MPPT 100/20
Battery voltage: 12/ 24/ 48 V
Nominal charging current: 20 A
Nominal PV power (12 V): 290 W
Nominal PV power (24 V): 580 W
Nominal PV power (48 V): 1160 W
Short circuit current: max. 20 A
PV open circuit voltage: max. 100 V
Peak efficiency: 98%
Bluetooth interface compatible with: iOS/ Andoid/ MacOS/ Windows
VICTRON ENERGY VE SCC110015060R - SmartSolar MPPT 100/15 15 A solar charge controller
93.9 EUR
The SmartSolar 100/15 from Victron Energy (MPN SCC110015060R) is an MPPT solar charge controller with max. 15 A charging current for charging 12 V and 24 V batteries. Unlike the BlueSolar 100/15, the smart version has integrated Bluetooth, which means you do not need to purchase a Bluetooth dongle. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control GX or the MPPT Control.The integrated Bluetooth in the SmartSolar series is the wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets and other devices.
An overview of the most important technical features
- Max. 15 A charging current, suitable for 12 V and 24 V batteries
- Nominal PV power for 12 V systems: 220 W
- Nominal PV power for 24 V systems: 440 W
- 15 A load output
- High peak efficiency of 98%
- Freely programmable battery charging algorithm (via the free Victron Connect app)
- Programmable light dimming functions
- Ultra-fast Maximum Power Point Tracking
VICTRON ENERGY VE MPPT 75/15 - Solar charge controller, MPPT 75/15
81.9 EUR
The Smartsolar 75/15 from Victron Energy is a MPPT solar charge controller with 15A max. charge current for charging 12V and 24V batteries. In contrast to the Bluesolar 75/15, the Smart version has integrated Bluetooth®, which makes the purchase of a Bluetooth® dongel unnecessary. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control GX or the MPPT Control.The integrated Bluetooth® in the SmartSolar series is the wireless solution to setup, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
MPPT: Ultra-fast Maximum Power Point Tracking
By continuously monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that all available energy is actually being drawn from the panels and stored. The benefit of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing.
Remote monitoring and control
You can remotely control and monitor the extensive features of your SmartSolar MMPT charger by pairing it with your smartphone or other device via VictronConnect. If your system is connected to the Victron Remote Management Internet portal (VRM), you have full access to your MPPT anytime and from anywhere. Both services are available free of charge.
Load output
The 'Intelligent Load Output' function prevents damage caused by using ''dead'' batteries. You can configure the voltage at which the SmartSolar will disconnect a load - preventing excessive discharge of your batteries. And here's the kicker: the SmartSolar will attempt to recharge the battery to 100% every day. If this is not possible - e.g. in bad weather - it raises the disconnect voltage value every day until it is successful.
Technical data:
Model: MPPT 75/15
Battery voltage: 12/ 24 V
Nominal charging current: 15 A
Nominal PV power (12 V): 220 W
Nominal PV power (24 V): 440 W
Short circuit current: max. 15 A
PV open circuit voltage: max. 75 V
Peak efficiency: 98%
Bluetooth® interface compatible with: iOS/ Android/ MacOS/ Windows
VICTRON ENERGY VE SCC110020170R - BlueSolar MPPT 100/20 solar charge controller
87.9 EUR
The Victron Energy MPPT 100/20 (MPN SCC110020170R) is part of the BlueSolar MPPT charge controller family and offers ultra-fast power tracking, which can boost the yield of your solar system.MPPT: ultra-fast maximum power point tracking
By continuously monitoring the voltage and current output of your solar (PV) module, the MPPT technology ensures that all the available energy can be taken from the modules and stored. The advantage of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing.
Features
- Suitable for 12 V/24 V/48 V systems
- Short-circuit-proof load output
- Intelligent battery management with Battery Life
- Programmable battery charging algorithm
- Day/night timer and light suppression option
- Intelligent VE.Direct data communication port for connection to additional devices such as Bluetooth Smart Dongle or GX Color Control Panel
- Integrated protection against output short circuit/overtemperature
VICTRON ENERGY VE SCC010015050R - BlueSolar MPPT 75/15 15 A solar charge controller
63.92 EUR
The Victron MPPT 75/15 (MPN SCC010015050R) is part of the large family of BlueSolar MPPT charge controllers and, like its older siblings, it boasts ultra-fast power tracking and can therefore boost the yield of your solar system.Key product features of the BlueSolar 75/15 15 A 12 V 24 V MPPT
- Ultra-fast latest-generation MPP tracker ensures the maximum yield even in overcast skies
- Integrated VE.Direct data communication port for connection. For communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel
- 12 V 24 V systems are possible
- Nominal charging current of 15 A
- 220 W maximum PV power at 12 V, 440 W at 24 V systems
- Load output with 15 A power and automatic load cut-off in the event of imminent battery undervoltage (deep discharge protection)
- Integrated protection against battery reverse polarity
- Multi-stage and adaptive charging algorithm
- Programmable battery charging algorithm
- Integrated Battery Life Algorithm extends the life of your batteries if it is active and all loads run through the load output on the controller
- Day/night timer and light suppression option
VICTRON ENERGY VE SCC010010050R - BlueSolar MPPT 75/10 10 A solar charge controller
57.92 EUR
The Victron MPPT 75/10 (MPN SCC010010050R) is part of the large family of BlueSolar MPPT charge controllers and, like its older siblings, it boasts ultra-fast power tracking and can therefore boost the yield of your solar system.Key product features of the BlueSolar 75/10 10 A 12 V 24 V MPPT
- Ultra-fast latest-generation MPP tracker ensures the maximum yield even in overcast skies
- Integrated VE.Direct data communication port for connecting, for communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel
- 12 V 24 V systems are possible
- Nominal charging current of 10 A
- 145 W maximum PV power at 12 V, 290 W at 24 V systems
- Load output with 10 A power and automatic load cut-off in the event of imminent battery undervoltage (deep discharge protection)
- Integrated protection against battery reverse polarity
- Multi-stage and adaptive charging algorithm
- Programmable battery charging algorithm
- Integrated Battery Life Algorithm extends the life of your batteries if it is active and all loads run through the load output on the controller
- Day/night timer and light suppression option
VICTRON ENERGY VE MPPT CONTROL - MPPT Control, remote control for Victron BlueSolar MPPT series
63.92 EUR
Victron MPPT Control (MPN SCC900500000) is a solar computer, or a remote control panel, which can be used to configure and evaluate every BlueSolar MPPT charge controller with integrated VE.Direct port. With the MPPT Control, configuring and monitoring your load controller and its performance parameters is convenient and simple.Comprehensive viewing and control options
The MPPT Control offers a whole range of display values that provide the user with a deep insight into the controller's operating performance at all times. It is possible to read not only the current values, but also the historical values, which are stored in the device's internal memory for 30 days.
In addition to standard indicators such as live data and historical yield data, this device also offers a number of display options. In the history memory, information about the length of the individual charging stages, such as ''bulk, absorption and float'', is also available. Unique in this price range!
A-TRONIX 9887582 - Solar charge controller A100, 40 A, MPPT
175.32 EUR
a-TroniX MPPT A100/40 Solar Charge Controller 12/24V 40AThe A100/40 charge controller from a-TroniX is a Bluetooth® enabled MPP (Maximum Power Point) tracker. Due to its speed, the MPPT optimizes the energy output of your solar system with changes in light intensity. The solar charge controller converts the PV voltage into battery voltage.
MPPT (Maximum Power Point Tracker):
By continuously monitoring the voltage and current output of the solar (PV) modules, the MPPT ensures that all energy that is available is drawn from the modules and stored. This advantage is especially noticeable when the sky is partly cloudy and the light intensity is constantly changing.
Compatibility:
The a-TroniX A100/40 MPPT is compatible with Gel, AGM, Liquid Electrolyte, Lithium (standard: Gel) batteries.
LCD Display:
The LCD display allows convenient reading of operating data and status in real time.
Safety:
The solar charge controller is protected from overheating by the built-in power reduction function and provides automatic protection to prevent exceeding the rated charge power and current.
Features:
- 12/24V (automatic detection) system voltage possible
- 520W max. PV power at 12V, 1040W at 24V
- 40A max. charging current
- 30A output current
- 98% efficiency
- Charging current in A: 40
- Volt: 12/24
- Technology: MPPT
- Dimensions (L x W x H): 196.5 x 136.6 x 67.1 mm
- Weight: 1.454 kg
STECA SOLARIX MPPT3020 - Solar charge controller MPPT 3020, 30 A
202.72 EUR
Steca Solarix MPPT are solar charge controllers with maximum power point tracking.These are suitable for all common module technologies and are ideal for solar systems with module voltages higher than the battery voltage. In particular, this means that inexpensive PV modules used for grid-connected systems can also be used independently.
Steca's efficient MPP tracking algorithm always makes the maximum usable power of the module available and thus considerably increases energy yield, especially in poor weather conditions (cloud cover, winter, diffuse light). The Steca Solarix MPPT charge controllers combine state-of-the-art charging technology with high efficiency, professional battery care with numerous setting options, modern design, outstanding protective functions and an intuitive LC display with menu navigation.
The Solarix MPPT charge controllers can be upgraded with PA WiFi1 to provide cost-effective remote access to the Internet portal.
Product features:
- Maximum Power Point Tracker (MPP Tracker)
- Voltage and current regulation
- multi-stage charging technology (also suitable for lithium batteries)
- automatic load disconnection and reconnection
- monthly equalization charge
Electronic protection functions:
- Overload protection
- Deep discharge protection
- Reverse polarity protection of module, load and battery
- Automatic electronic fuse
- Short circuit protection
- Open circuit protection without battery
- Reverse current protection at night
- Overtemperature and overload protection
- Load cut-off in case of battery overvoltage
VICTRON ENERGY VE SCC020050200 - BlueSolar MPPT 100/50 50 A solar charge controller
188.85 EUR
The Victron MPPT 100/50 (MPN SCC020050200) is part of the large family of BlueSolar MPPT charge controllers and, like its older siblings, it boasts ultra-fast power tracking and can therefore boost the yield of your solar system. Key product features of the BlueSolar 100/50 50 A 12 V 24 V MPPT
- Ultra-fast latest-generation MPP tracker ensures the maximum yield even in overcast skies
- Automatic detection of the MPP voltage in partial shading ensures another improvement to the yield compared to ''simple'' MPPT charge controllers
- Integrated VE.Direct data communication port for connecting, for communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel
- High maximum efficiency of 98%
- Fully programmable charging algorithms, which are subsequently activated and switched manually via a switch on the housing
- Nominal charging current 50 A, 100 V maximum PV no-load voltage
- 700 W maximum PV power at 12 V, 1400 W at 24 V systems
- Integrated protection against battery reverse polarity
- Multi-stage and adaptive charging algorithm
- Integrated temperature sensor balances maintenance and constant charge voltage by temperature
- Day/night timer and light suppression option
VICTRON ENERGY VE SCC010015200R - BlueSolar MPPT 100/15 15 A solar charge controller
75.91 EUR
The Victron MPPT 100/15 (MPN SCC010015200R) is part of the large family of BlueSolar MPPT charge controllers and, like its older siblings, it boasts ultra-fast power tracking and can therefore boost the yield of your solar system. Compared to the 75/15, this controller can process a higher PV voltage and therefore safely control up to 100 V DC voltage.Key product features of the BlueSolar 100/15 15 A 12 V 24 V MPPT
- Ultra-fast latest-generation MPP tracker ensures the maximum yield even in overcast skies
- Integrated VE.Direct data communication port for connection. For communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel
- 12 V 24 V systems are possible
- Nominal charging current of 15 A
- 220 W maximum PV power at 12 V, 440 W at 24 V systems
- Load output with 15 A power and automatic load cut-off in the event of imminent battery undervoltage (deep discharge protection)
- Integrated protection against battery reverse polarity
- Multi-stage and adaptive charging algorithm
- Programmable battery charging algorithm
- Integrated Battery Life Algorithm extends the life of your batteries if it is active and all loads run through the load output on the controller
- Day/night timer and light suppression option
A-TRONIX 9887580 - Solar charge controller A100, 20 A, MPPT
92.59 EUR
a-TroniX MPPT X45/10 Solar Charge Controller 12V 10AThe X45/10 charge controller from a-TroniX is a Bluetooth®-enabled MPP (maximum power point) tracker. Due to its speed, the MPPT optimizes the energy output of your solar system with changes in light intensity. The solar charge controller converts the PV voltage into battery voltage.
MPPT:
By continuously monitoring the voltage and current output of the solar (PV) modules, the MPPT ensures that all energy that is available is drawn from the modules and stored. This advantage is particularly noticeable when the sky is partially overcast and the light intensity is constantly changing.
Compatibility:
The a-TroniX X45/10 MPPT is compatible with Lithium, Wet, Gel, AGM (Standard:GEL) batteries.
Features:
- 12V system voltage
- 130W max PV power
- 10A max. charging current
- 10A output current
- 98% efficiency
- volt: 12
- charging current in A: 10
- Weight: 0.28 kg
- Technology: MPPT
- Dimensions (L x W x H): 85.5 x 81 x 23.1 mm
VICTRON ENERGY VE ASS050500000 - Wall mount, for Victron BMV, MPPT Control
34.94 EUR
This plastic housing (MPN ASS050500000) is the elegant and safe way to house your BMV from the 700 series or the MPPT Control solar computer. In addition to the significantly improved protection of the electronics against moisture, the housing also offers other advantages in terms of installation safety. The cables are routed through an opening and can still be relieved of strain in the housing. Compatible with
- Victron 700 series BMV battery monitors
- Victron MPPT Control
Included in delivery
1x Victron ASS050500000 housing for BMV70x and MPPT Control
VICTRON ENERGY VE SCC020035000 - BlueSolar MPPT 150/35 35 A solar charge controller
188.85 EUR
Key product features of the BlueSolar 150/35 35 A 12 V 24 V 36 V 48 V MPPT - Ultra-fast latest-generation MPP tracker ensures the maximum yield even in overcast skies
- Automatic detection of the MPP voltage in partial shading ensures another improvement to the yield compared to ''simple'' MPPT charge controllers
- Integrated VE.Direct data communication port for connecting, for communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel
- High maximum efficiency of 98%
- Fully programmable charging algorithms, which are subsequently activated and switched manually via a switch on the housing
- Nominal charging current 35 A, 150 V maximum PV no-load voltage
- 12 V: 500 W/24 V: 1000 W/36 V: 1500 W/48 V: 2000 W
- Integrated protection against battery reverse polarity
- Multi-stage and adaptive charging algorithm
- Integrated temperature sensor balances maintenance and constant charge voltage by temperature
VICTRON ENERGY VE SCC075010060R - SmartSolar MPPT 75/10 10 A solar charge controller
75.91 EUR
The Smartsolar 75/10 from Victron Energy (MPN SCC075010060R) is an MPPT solar charge controller with max. 10 A charging current for charging 12 V and 48 V batteries. Unlike the BlueSolar 75/10, the smart version has integrated Bluetooth, which means you do not need to purchase a Bluetooth dongle. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control GX or the MPPT Control.The integrated Bluetooth in the SmartSolar series is the wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets and other devices.
An overview of the most important technical features
- Max. 10 A charging current, suitable for 12 V and 24 V batteries
- Nominal PV power for 12 V systems: 145 W
- Nominal PV power for 24 V systems: 290 W
- 10 A load output
- High peak efficiency of 98%
- Freely programmable battery charging algorithm (via the free Victron Connect app)
- Programmable light dimming functions (using the free Victron Connect app)
- Ultra-fast Maximum Power Point Tracking
- Max. PV no-load voltage: 75 V
- Charging algorithm: multi-stage, adaptive
Bluetooth module
A-TRONIX 9887584 - Solar charge controller A150, 60 A, MPPT
252.8 EUR
a-TroniX MPPT A150/40 Solar Charge Controller 12/24/36/48V 60AThe A150/60 charge controller from a-TroniX is a Bluetooth®-enabled MPP (maximum power point) tracker. Due to its speed, the MPPT optimizes the energy output of your solar system with changes in light intensity. The solar charge controller converts the PV voltage into battery voltage.
MPPT (Maximum Power Point Tracker):
By continuously monitoring the voltage and current output of the solar (PV) modules, the MPPT ensures that all energy that is available is drawn from the modules and stored. This advantage is especially noticeable when the sky is partly cloudy and the light intensity is constantly changing.
Compatibility:
The a-TroniX A150/60 MPPT is compatible with Gel, AGM, Liquid Electrolyte, Lithium (standard: Gel) batteries.
LCD Display:
The LCD display allows convenient reading of operating data and status in real time.
Safety:
The solar charge controller is protected from overheating by the built-in power reduction function and provides automatic protection to prevent exceeding the rated charge power and current.
Features:
- 12/24/36/48V (automatic detection) system voltage possible
- 750W max. PV power at 12V, 1500W at 24V, 2250 at 36V, 3000 at 48V
- 60A max. charging current
- 30A output current
- 98% efficiency
- Charging current in A: 60
- Volt: 12/24/36/48
- Technology: MPPT
- Dimensions (L x W x H): 262.5 x 186.5 x 97.5 mm
- Weight: 3.326 kg
STECA SOLARIX MPPT5020 - Solar charge controller MPPT 5020, 50 A
413.26 EUR
Steca Solarix MPPT are solar charge controllers with maximum power point tracking.These are suitable for all common module technologies and are ideal for solar systems with module voltages higher than the battery voltage. In particular, this means that inexpensive PV modules used for grid-connected systems can also be used independently.
Steca's efficient MPP tracking algorithm always provides the maximum usable power of the module and thus significantly increases energy yield, especially under poor weather conditions (cloud cover, winter, diffuse light). The Steca Solarix MPPT charge controllers combine state-of-the-art charging technology with high efficiency, professional battery care with numerous setting options, modern design, excellent protective functions and an intuitive LC display with menu navigation.
The Solarix MPPT charge controllers can be upgraded with PA WiFi1 to provide cost-effective remote access to the Internet.
Product features:
- Maximum Power Point Tracker (MPP Tracker)
- Voltage and current regulation
- multi-stage charging technology (also suitable for lithium batteries)
- automatic load cut-off and restart
- monthly equalization charge
Electronic protection functions:
- Overload protection
- Deep discharge protection
- Reverse polarity protection of module, load and battery
- Automatic electronic fuse
- Short circuit protection
- Open circuit protection without battery
- Reverse current protection at night
- Overtemperature and overload protection
- Load disconnection in case of battery overvoltage
Waiter:
- simple menu-driven operation
- Programming by keys
- manual load switch
A-TRONIX 9887579 - Solar charge controller X45, 10 A, MPPT
38.84 EUR
a-TroniX MPPT X45/10 Solar Charge Controller 12V 10AThe X45/10 charge controller from a-TroniX is a Bluetooth®-enabled MPP (maximum power point) tracker. Due to its speed, the MPPT optimizes the energy output of your solar system with changes in light intensity. The solar charge controller converts the PV voltage into battery voltage.
MPPT:
By continuously monitoring the voltage and current output of the solar (PV) modules, the MPPT ensures that all energy that is available is drawn from the modules and stored. This advantage is particularly noticeable when the sky is partially overcast and the light intensity is constantly changing.
Compatibility:
The a-TroniX X45/10 MPPT is compatible with Lithium, Wet, Gel, AGM (Standard:GEL) batteries.
Features:
- 12V system voltage
- 130W max PV power
- 10A max. charging current
- 10A output current
- 98% efficiency
- volt: 12
- charging current in A: 10
- Weight: 0.28 kg
- Technology: MPPT
- Dimensions (L x W x H): 85.5 x 81 x 23.1 mm
STECA SOLARIX PR3030 - Solar charge controller, 30 A with LCD display
151.76 EUR
The Steca PR 30-30-charge controller series is the highlight of the solar charge controllers.The latest charging technologies, combined with a significantly improved Steca-AtonIC state-of-charge determination result in optimum battery maintenance and control of the module output of up to 900 Wp which can be connected. A large display informs the user about all operating modes with the help of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current, and charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter that can be reset by the user.
Hybrid controller
•State of charge determination via Steca AtonIC (SOC)
•Automatic voltage adjustment
•PWM regulation
•Multi-stage charging technology
•Load disconnection depending on SOC
•Automatic load reconnection
•temperature compensation
Common positive earthing or negative earthing on one terminal
•Integrated data logger
•Nightlight function
•Self-test function
•Monthly maintenance charge
STECA SOLARIX PRS3030 - Solar Charge Controller 30A
92.95 EUR
The Solarix PRS solar charge controller impresses with its simplicity and high performance, while providing a modern design with a convenient display at a very attractive price.Several LEDs in various colours emulate a tank display, which gives information on the battery's level of charge. Modern Steca algorithms are used to ensure optimum battery maintenance. The Steca Solarix PRS charge controllers are equipped with an electronic fuse to provide optimum protection. They work on the serial principle and disconnect the solar panel from the battery to protect against overloading.
Series controller
Automatic voltage adjustment
Voltage and current control
PWM regulation
Multi-stage charging technology
Current compensated load disconnection
Automatic load reconnection
temperature compensation
Common positive earthing or negative earthing on one terminal
Self-test function
Monthly maintenance charge
Electronic protection functions
Overcharge protection
Deep discharge protection
Reverse polarity protection of load, module and battery
Automatic electronic fuse
Short circuit protection for load and module
Overvoltage protection at module input
Open-circuit protection without battery
Reverse current protection at night
Over-temperature and overload protection
Battery over-voltage shutdown
VICTRON ENERGY VE ASS050600000 - Wall bracket, for Victron Color Control GX, BMV, MPPT Control
49.93 EUR
This plastic housing (MPN ASS050600000) is the safe and elegant way to house your Color Control GX and additionally an MPPT Control or BMV battery monitor. In addition to the significantly improved protection of the electronics against moisture, the housing also offers other advantages in terms of installation safety. The cables are routed through an opening and can still be relieved of strain in the housing. Compatible with
Victron Color Control GX + BMV 70x or MPPT Control
Included in delivery
1x Victron ASS050600000 housing Color Control GX + BMV 70x and MPPT Control
VICTRON ENERGY VE BP 100 - BatteryProtect, 12/ 24 V, 100 A.
69.54 EUR
The BatteryProtect function separates the battery from the less important consumers before it is completely discharged (which would damage it) or before it no longer has enough energy to start the engine.The Battery protect is a unidirectional device. It only allows current in one direction, i.e. either current to a consumer or with current from a charger, but not both currents at the same time. In addition, the current can only flow from the battery connection to the consumer connection. When used with a consumer, the battery must be connected to the battery connection, when used with a charger, the charger must be connected to the battery connection.
- For 12 V and 24 V batteries with automatic detection of the voltage range of the battery tank
- 6 different cut-off voltages can be selected
- 100 a maximum switching capacity
- Simple programming and status display of the settings via seven-segment display
- Extra mode for lithium batteries - in this mode the BP can be controlled by the VE.Bus BMS
- Very low power consumption
- Explosion protection by integrated MOSFET switches which replace the relays and thus reduce the risk of sparks to zero
- Integrated alarm output
Technical Data:
Model: BP-100 (12/ 24 V)
Load current: Max. 100 A.
Peak current: 600 A.
Operating voltage: 6 - 35 V.
Connection: M8
VICTRON ENERGY VE TR 12/12-30 - DC/DC charger, 12 V, 30 A
282.83 EUR
The Orion-Tr Smart DC-DC charger is a professional, DC-to-DC adaptive 3-stage charger with integrated Bluetooth, known in the market as a charging booster and/or battery-to-battery (B2B) charger.For use in dual battery systems in vehicles or on boats where the (intelligent) alternator and the starting battery are used to charge the service battery. The device can be monitored and programmed via Bluetooth and can be controlled remotely via a remote on/off switch. It has an motor operating recognition mechanism.
The Orion Tr-Smart Charger can be used in 12-V or 24-V systems and is suitable for both lead and lithium batteries. Models are available up to 400 W and an unlimited number of devices can be connected in parallel to increase output power.
Technical data:
Input voltage: 10 - 17 V
Output voltage: 12.2 V
Output current: 30 A
VICTRON ENERGY VE BUS SM DONGLE - Victron VE.Bus Smart Dongle
109.59 EUR
The VE.Bus Smart Dongle from Victron Energy combines two products in one: Firstly, it allows the Victron inverters/chargers with VE.Bus port to be connected to your smartphone or tablet via Bluetooth. Secondly, it supplements these devices with a voltage and temperature recording, which is especially useful when used with the Multiplus 2, as it does not have built-in terminals for voltage and temperature sensor wiring.Use your VE.Bus products with the VictronConnect app
It is the Bluetooth accessory for our inverters/chargers: Multis, MultiPlus, MultiPlus-II, MultiGrid, MultiGrid-II, Quattros and our Phoenix inverter series with VE.bus connection. After installation, use the VictronConnect app to monitor operation and operate the system: Change the input current limit and switch between the Off, On and Charger Only modes.
Secondly, it includes voltage and temperature detection to inverters/chargers.
VICTRON ENERGY VE BMV 712 - Battery monitor BMV 712
178.85 EUR
The BMV 712 Smart from Victron Energy (MPN BAM030712000R) is the latest battery computer in the BMV family. It provides very precise data on parameters such as battery voltage, current, power, used ampere hours, charge state and remaining time at the current discharge rate. The measurement resolution is very accurate and precise compared to similar products.in addition, it is equipped with an integrated Bluetooth module that allows you to access many functions and status reports from the battery computer via a free app. - Programmable isual and acoustic alarm
- Programmable relay for switching off non-essential loads or switching on a generator if necessary.
- A 500-amp, quick-connect shunt and a connection kit.
- Shunt capacity selectable up to 10,000 amps.
- VE.Direct communication connection
- Stores a wide range of historical data that can be used to assess usage patterns and battery health.
- Wide input voltage range: 6.5 - 70 V
- High current measurement resolution 10 mA (0.01 a)
VICTRON ENERGY VE IP22 24/16-1 - Smart charger for lead-acid, lithium batteries, IP22, 24 V/16 A
229.57 EUR
24 V 16 A charger for motor homes and boats with 1 outputBattery charger with built-in Bluetooth. This allows you to monitor the charge level of your battery via smartphone.
The VictronConnect app
Set, view and configure your Blue Smart IP22 charger using your smartphone. With the VictronConnect app for iOS and Android devices, you can view the status of your charger and battery and even control the functions of your charger. By default, the voltage and current are displayed on the screen.
Technical data
- Connection: screw terminals
- Width: 65 mm
- Height: 235 mm
- Length: 108 mm
- Voltage: 24 V
- Current: 16 A
VICTRON ENERGY VE IP22 24/16-3 - Smart charger for lead-acid, lithium batteries, IP22, 24 V/16 A
247.63 EUR
24 V 16 A charger for motorhomes and boats with 3 outputsBattery charger with built-in Bluetooth. This allows you to monitor the charge level of your battery via smartphone.
The VictronConnect app
Set, view and configure your Blue Smart IP22 charger using your smartphone. With the VictronConnect app for iOS and Android devices, you can view the status of your charger and battery and even control the functions of your charger. By default, the voltage and current are displayed on the screen.
Technical data
- Connection: screw terminals
- Width: 65 mm
- Height: 235 mm
- Length: 108 mm
- Voltage: 24 V
- Current: 16 A
VICTRON ENERGY VE BS IP22 24/12 - Smart charger for lead-acid, lithium batteries, IP22, 24 V/12 A
164.88 EUR
24 V 12 A charger for motorhomes and boats with 1 outputBattery charger with built-in Bluetooth. This allows you to monitor the charge level of your battery via smartphone.
The VictronConnect app
Set, view and configure your Blue Smart IP22 charger using your smartphone. With the VictronConnect app for iOS and Android devices, you can view the status of your charger and battery and even control the functions of your charger. By default, the voltage and current are displayed on the screen.
Technical data
- Connection: screw terminals
- Width: 65 mm
- Height: 235 mm
- Length: 108 mm
- Voltage: 24 V
- Current: 12 A
VICTRON ENERGY VE SMART SENSOR - Battery sensor, voltage sensor and temperature sensor
51.28 EUR
Victron Smart battery sensor, voltage sensor and temperature sensor (up to 10 m range)Voltage sensor and temperature sensor for MPPT charging regulator
The wireless battery sensor measures the voltage and temperature of the battery. This data improves the charging efficiency of the MPPT charging regulator.
VICTRON ENERGY VE IP22 12/15-1 - Smart charger for lead-acid, lithium batteries, IP22, 12 V/15 A
133.88 EUR
15 A charger for cars, motorhomes and boats with 1 outputBattery charger with built-in Bluetooth. This allows you to monitor the charge level of your battery via smartphone.
The VictronConnect app
Set, view and configure your Blue Smart IP22 charger using your smartphone. With the VictronConnect app for iOS and Android devices, you can view the status of your charger and battery and even control the functions of your charger. By default, the voltage and current are displayed on the screen.
Technical data
- Connection: screw terminals
- Width: 65 mm
- Height: 235 mm
- Length: 108 mm
- Voltage: 12 V
- Current: 15 A
VICTRON ENERGY VE BAT BALANCER - Battery balancer, 24 V
64.72 EUR
Victron battery balancer charge level compensatorDifferent charging levels of batteries that have been connected in series or in parallel can lead to overcharging. This significantly shortens the life of the batteries.
The battery balancer compensates for the charge level of 2 batteries connected in series (24 V system). The charge level compensator can also be used for several parallel lines of batteries connected in series
If necessary, several balancers can be connected in parallel.
The balancer can also be used for a 48 V system. In this case, you will need three battery balancers.
The balancer has several LED indicators to control your battery system:
- Green: on (battery voltage > 27.3 V)
- Orange: lower battery circuit active (deviation > 0.1 V)
- Orange: upper battery circuit active (deviation > 0.1 V)
- Red: alarm (deviation > 0.2V) The display remains until the deviation drops below 0.14 V or until the voltage drops below 26.6 V.
VICTRON ENERGY VE BS IP22 12/30 - Automatic charger for lead, lithium batteries, IP22, 12V/30A
228.82 EUR
The Blue Smart IP22 charger from Victron Energy, is a professional, compact 12 V 30 a battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The charger can be used with equipment in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and mobile homes and charges both classic 12 V lead-acid batteries and modern lithium batteries.Technical Highlights:
- Charges 12 V lead-acid, gel, AGM and lithium batteries
- 30 a maximum charging current
- 3 Battery Charging Outputs
- State-of-the-art, seven-stage charging algorithm
- With integrated Bluetooth for use with the free VictorConnect app
Intelligent charging, up to the perfect battery condition
The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life.
Recovery of deep-discharged ''dead'' batteries
Unlike most other brands and product lines, the Blue Smart IP22 charger will try to recharge a low-discharge battery by forcing it to have a low-charge current. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals.
Remotely check battery status using the VictorConnect app
The Blue Smart charger has built-in Bluetooth. This allows you to check the status of the charger and battery on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictorConnect app.
Trend-setting efficiency
With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industry standard. After the battery has also been fully charged, the power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard.
Storage mode: Less maintenance and aging when the battery is at rest
Storage mode is activated whenever no discharge has occurred within 24 hours. The charge maintenance voltage is then reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimize the gas development and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gas voltage. This provides a kind of equalizing charge that prevents electrolyte stratification and sulphation, the two main causes of premature battery failure.
VICTRON ENERGY VE BS IP65 12/5 - Automatic charger for lead, lithium batteries, IP65, 12V/5A
104.05 EUR
Battery charger with built-in Bluetooth. It is designed to charge 12 V batteries of various types and provided a maximum charging current of 5 A. Together with the free VictorConnect app, you can easily and smart evaluate the activity of your battery charger via your smartphone, tablet or computer and even configure it to a certain extent.Technical Highlights:
- Easy configuration and setup
- Suitable for all 12 V battery types
- Max. 5 a charging current
- Automatic temperature adjustment at low or high temperatures
- 7-stage intelligent load algorithm
- Can restore completely discharged batteries to ''dead batteries''
- Has low-power mode for charging small batteries
- Lithium-Ion Battery Mode
ultra-efficient ''green'' battery charger
With an efficiency of up to 95%, these chargers generate three to four times less heat than the industry standard. And, after the battery is fully charged, the power consumption is reduced to 0.5 watts, which is five to ten times better than the industry standard.
durable, safe and quiet
- Low heat load on electronic components
- Protected against the ingress of dust, water and chemicals.
- Protection against overheating: The output current is reduced linearly when the temperature rises to 60 °C, so the charger does not fail even at extreme temperatures
- The chargers are absolutely silent thanks to passive cooling: No fan or other moving parts
Reconditioning (Recovery)
A Lead-Acid Battery. If the charge was not sufficiently charged, or if the charge was left in the discharged state for days or weeks, its performance will deteriorate due to sulphation. If the process is stopped in time, it partially reverses the sulphation by charging the battery with low current until a higher voltage is reached.
Function for recovering completely discharged batteries
Most reverse polarity protected chargers do not recognize and therefore do not recharge a battery that has been discharged to zero volts or almost zero volts. However, the Blue Power charger will attempt to recharge a fully discharged low current battery and resume normal charging after sufficient voltage is established via the battery connector.
Includes:
1x Battery charger
1x operating instructions
1x terminals
1x M8 Cable lug connectors
VICTRON ENERGY VE BS IP22 12/20 - Smart charger for lead-acid, lithium batteries, IP22, 12 V/20 A
162.34 EUR
20 A charger for cars, motorhomes and boats with 1 outputBattery charger with built-in Bluetooth. This allows you to monitor the charge level of your battery via smartphone.
The VictronConnect app
Set, view and configure your Blue Smart IP22 charger using your smartphone. With the VictronConnect app for iOS and Android devices, you can view the status of your charger and battery and even control the functions of your charger. By default, the voltage and current are displayed on the screen.
Technical data
- Connection: screw terminals
- Width: 65 mm
- Height: 235 mm
- Length: 108 mm
- Voltage: 12 V
- Current: 20 A
VICTRON ENERGY VE TRS 12/12-18 - DC/DC charger, 12 V, 18 A
168.08 EUR
Victron Orion-Tr Smart DC-DC charging booster 12/12 18 A 220 W insulated DC-DC charger 12 V/12 V 18 A
The charging booster is specially designed for motorhomes and boats with a double battery system, where the alternator and starter battery are used to charge the supply battery. You can monitor the Orion-Tr on your smartphone using Bluetooth.
Advantages
- Can be used for lead-acid and lithium batteries
- 3-stage charger
- Ideally suited to intelligent Euro 6 alternators
Technical data
- Voltage: 12 volts
- Current: 18 A
- Dimensions (L x W x H): 186 x 70 x 130 mm
VICTRON ENERGY VE ASS030530230 - Victron VE.Direct, 3 m connecting cable
25.94 EUR
The Victron 3 m VE.Direct Cable ASS030530230) is required to connect devices intended to communicate with each other via the VE-Direct port. For example, the BlueSolar controller and the MPPT Control remote control panel.
The following connections can be established to it:
- Victron BlueSolar MPPT controller for the Victron Color Control GX Panel
- Victron BlueSolar MPPT controller for the MPPT Control remote control unit BMV70xxx
- series to the Color Control GX Panel
- BMV60xxx series to Color Control GX
- PanelPhoenix inverter 12 V 24 V 48 V 250 W - 500 W for the Color Control GX Panel
The VE.Direct cables are not included with these device series and are available in lengths from 0.3 to 10 m.
Included in delivery:
1x Victron ASS030530230 3 m VE.Direct Cable
VICTRON ENERGY VE ASS030530310 - Victron VE.Direct, 10 m connecting cable
30.95 EUR
The Victron 10 m VE.Direct Cable (ASS030530310) is required to connect devices intended to communicate with each other via the VE-Direct port. For example, the BlueSolar controller and the MPPT Control remote control panel.
The following connections can be established to it:
- Victron BlueSolar MPPT controller for the Victron Color Control GX Panel
- Victron BlueSolar MPPT controller for the MPPT Control remote control unit BMV70xxx
- series to the Color Control GX Panel
- BMV60xxx series to Color Control GX
- PanelPhoenix inverter 12 V 24 V 48 V 250 W - 500 W for the Color Control GX Panel
The VE.Direct cables are not included with these device series and are available in lengths from 0.3 to 10 m.
Included in delivery:
1x Victron ASS030530310 10m VE.Direct Cable
VICTRON ENERGY VE ASS030530250 - Victron VE.Direct, 5 m connecting cable
27.94 EUR
The Victron 5 m VE.Direct Cable (ASS030530250) is required to connect devices intended to communicate with each other via the VE-Direct port. For example, the BlueSolar controller and the MPPT Control remote control panel.
The following connections can be established to it:
- Victron BlueSolar MPPT controller for the Victron Color Control GX Panel
- Victron BlueSolar MPPT controller for the MPPT Control remote control unit BMV70xxx
- series to the Color Control GX Panel
- BMV60xxx series to Color Control GX
- PanelPhoenix inverter 12 V 24 V 48 V 250 W - 500 W for the Color Control GX Panel
The VE.Direct cables are not included with these device series and are available in lengths from 0.3 to 10 m.
Included in delivery:
1x Victron ASS030530250 5m VE.Direct Cable