Best Other computer accessories Products REICHELT IE

Home > Other computer accessories > REICHELT IE > Other computer accessories REICHELT IE

REICHELT IE: Other computer accessories

The Best

LOGITECH MXPR - Mouse pad with palm rest, black 31.6 EUR Premium non-slip material for comfort during hours of typing.

MOVE. ADAPT. TYPE.
The MX palm rest provides all-day comfort with a stable and smooth surface. This premium-quality palm rest can be positioned as needed. With its special design for flat keyboards, it fits perfectly with Logitech MX Keys or Logitech Craft.

ERGONOMIC WORK FOR LONG PERIODS
The palm rest provides stable support for your wrists and keeps your hands in a comfortable, relaxed position so you can type comfortably for hours.

HIGH-QUALITY MATERIALS
The soft yet stable memory foam is comfortable and durable, and is also dirt-repellent and easy to clean.

WORK OPTIMALLY
The palm rest is smooth and grippy, but does not slip on surfaces. It stays in place, no matter how or where you type.

SEE OFFER

Top Pick

MANHATTAN 154192 - Barcode scanner, holder 25.4 EUR For Manhattan barcode scanner models 153997, 154116 and 154185, tilting and height adjustable, shelf with stand, black

Suitable for all environments
Adjust the angle and height to optimally align your scanner and scan reliably and accurately. Whether on a table, counter or desk - this stand is the ideal solution for retail/POS systems, catering, healthcare, warehouses, logistics and more.

Robust and ready to use
The stand has a free-standing, rubberised base with rubber feet that prevent slippage and scratches on surfaces. It is delivered fully assembled and ready for use.

Conveniently set your scanner down or scan directly from the holder
Suitable for table, counter or desk - ideal for retail/point of sale, catering, healthcare, warehouses, logistics and other applications
Free-standing, rubberised stand prevents slippage and protects your surface from scratches
Delivery condition fully assembled for immediate use
10-year warranty

Included in delivery

Adjustable holder for barcode scanners

SEE OFFER

Excellent

GOOD CONNECTIONS GC 8055-F18Q - RJ45 - transparent window opening 0,26m 15.64 EUR With the LAN window connection from Good Connections, you simply run your LAN cable through the window frame. Open the window, put the LAN window in between, close the window, done! A tedious drilling through the wall is no longer necessary. The window opening is thin enough (about 0.3 mm) to close the window properly and at the same time strong enough to withstand many openings of the window.

Technology: Printed circuit board
Connections: RJ45-socket on both sides
Thickness: approx. 0.3 mm
Color: Transparent
Total length: 25 cm
Length of flexible area: 18 cm

For a better hold, the jacks can also be fixed with the two 3M adhesive strips supplied.

SEE OFFER

Recommended

FREI RPIZ CAM FL15 - Raspberry Pi Zero - flex cable for standard camera module, 15 cm 12.43 EUR Flexible cable for connecting the Raspberry Pi Zero and Raspberry Pi Zero W/WH to a standard Raspberry Pi camera module.

Length: 15 cm

SEE OFFER

Featured

ARD MKR SHD MEM - Arduino MKR Shield - SD card and flash memory 34.96 EUR Do you need more memory for your application with the Arduino MKR? Use this board and get 2 MB of fast flash memory. Or expand the memory space as you like by using this board with an SD memory card!

1x micro SD card slot

2 MB SPI flash memory

Note

Supplied without a memory card

SEE OFFER

Alternative

ICYBOX RPI CASE RP108 - Housing for Raspberry Pi 4, plastic, black 27.83 EUR Protective housing for Raspberry Pi® 4

Properties

- housing solution specially developed for the Raspberry Pi® 4
- translucent plastic frame to keep Raspberry Pi® and all status LEDs in view
- upper aluminium cover supports installation of a 40 mm fan (included in delivery)
- self-adhesive heat sinks for the most important chipsets included
- can prevent the Raspberry Pi® from slowing down due to high temperatures
- supports the installation of Raspberry Pi® HAT modules and antennas (not included)
- innovative housing design allows easy access to all ports, such as power, video, audio, USB, LAN, microSD and GPIO, camera CSI and display DSI
- Prepared for Raspberry Pi® touch display and wall mounting

Note

- Delivery without Raspberry Pi

SEE OFFER

CONTOUR CT CDTP10500 - Touchpad mouse, Bluetooth/USB-C, ergonomic 156.67 EUR Experience pain-free precision
Say goodbye to shoulder pain and welcome a touchpad mouse that works as hard as you do.

Why you'll love it

Ergonomic navigation: The centrally placed computer touchpad reduces shoulder strain and is ideal for users with shoulder pain or discomfort.
Smooth precision: The high-resolution glass surface allows effortless, precise control by fingertip with the ability to click anywhere.
Increases productivity: Native Windows gesture support and four convenient shortcuts (copy/paste, back/forward) ensure a fast workflow.
Customisable control: Customise the touchpad speed and commands in Windows or the app to suit your needs.
All-day comfort: The full-size wrist rest offers ergonomic palm and wrist support for smooth transitions between typing and navigation.

SEE OFFER

THERMAL GRIZZLY TG-WV-P38H1R - WireView GPU 1x12VHPWR to 3x8Pin PCIe reversed 66.7 EUR The WireView GPU is a device for measuring the power consumption of graphics cards developed in collaboration with Jon ''elmor'' Sandström. It plugs into the PCIe power connectors on the graphics card and connects to the power supply unit via the PCIe power cables. An OLED display shows the power consumption data.

At the same time, the WireView GPU performs a cable management function, as its ''U'' shape allows optimised cable routing. The PCIe power cables are connected to the WireView GPU in such a way that they can be routed neatly over the backplate of the graphics card. This prevents cable bulges when laying the power cables and simplifies cable management.

Power consumption measurement
Power consumption recording
Optimised cable routing
Simple assembly
High level of compatibility

SEE OFFER

THERMAL GRIZZLY TG-WLPA-001 - Aeronaut thermal compound 1g 15.02 EUR Aeronaut thermal compound is an ideal entry-level product with very good effectiveness: Aeronaut's high surface protection and good thermal conductivity are ideal for all users who want to optimise their cooling system effectively or, for example, replace the thermal compound supplied with the hardware - and all this at an outstanding price-performance ratio.

Very good thermal conductivity
High long-term stability
No curing
Not electrically conductive

Although the proportion of metallic elements is slightly lower compared with other products in our assortment, Aeronaut also offers reliable and high-performance thermal conductivity.

SEE OFFER

THERMAL GRIZZLY TG-CW-10 - Cleaning Wipes, pack of 10 19.15 EUR Clean and degreased surfaces are important to ensure that thermal conductive materials such as thermal compounds or liquid metal adhere well and thus develop their full thermal conductivity. This is where TG cleaning wipes come in: cleaning wipes for cleaning surfaces. TG cleaning wipes contain ten double packs, each with two dry wipes and two wet wipes optimised for removing thermal compound residues.

Wet wipes for removing thermal compound
Removes grease residues (e.g. fingerprints)
Packaged in ten double packs for easy storage
A total of 20 dry wipes and 20 wet wipes

First, stubborn dirt is removed with a dry wipe before the surface is cleaned with the two wet wipes. In the third cleaning step, the surface is dried and wiped with a fresh dry wipe.

Assembly aids such as the TG Kapton Insulation Sheet or TG Shield protective lacquer also adhere better to cleaned surfaces. TG cleaning wipes are offered as a practical complete set of 40 cleaning wipes, packaged in ten double packs of two dry wipes and two wet wipes each.

SEE OFFER

JOY-IT DEBO LED MATRIX1 - Developer boards - LED matrix, 64 x 64 RGB pixels 57.39 EUR Full color matrix module

This LED matrix is a 64x64 RGB pixel matrix which can be used with microcontrollers (e.g. Arduino, Micro:Bit and many more) or e.g. a Raspberry Pi.

The small grid of 3 mm allows good representations to be achieved.

Display type: RGB LED
Resolution: 64x64
Number: 4096 LEDs
LED size: 3 mm pitch
Dimensions: 192 x 192 x 14 mm
Supply voltage: 5 V
max. power consumption: 40 W
Control: 1/32 Scan
Operating temperature: -20 - 55 °C
Viewing angle: 140°.
Pixel density: 111,111 pixels/m²

Scope of delivery
LED matrix and cable

SEE OFFER

EXSYS EX-45034IS - PCI Express card for 4x serial RS-232/422/485, opt. iso. 287.94 EUR

Interface: RS-232 V.24/RS-422/RS-485
15-kV ESD over-voltage protection and 2.5-kV optical isolation
±15-kV IEC1000-4-2 ESD protection for RS232 I/Os
FIFO buffer 16C550 with 16 bytes
I/O addresses and interrupt are assigned by the operating system
Data bits: 7 and 8/stop bits: 1, 1.5, 2
Parity: none, even, odd, space and mark
Supports ATTATM Auto Transmitter
RS-422/485 termination - 120 ohms can be switched on or off
Chip set: FTDI

Signals:

RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 - 4 wire (TxD+/-, RxD+/-) full duplex
RS-485 - 4 wire (TxD+/-, RxD+/-) full duplex
RS-485 - 2 wire (Data+/-, Data+/-) half duplex

The EX-45034IS PCIe I/O card provides 4 serial RS-232, 422 and 485 high-performance UART 16C550 outputs with 15-KV ESD overvoltage protection and 2.5-kV optical isolation.

The card is fully plug-and-play compatible. It supports the ATTATM Auto RS-485 Transmitter features. The RS-232, 422 or 485 transmission type can be set individually for each port.

SEE OFFER

METZ CONNECT BTR 130920-BKKE - 19 inch Keystone module rack, 1RU, 24 port, black, unassembled 71.92 EUR Keystone 19 inch module rack 1U 24 port black unassembled, shielded

19 inch 1U module rack for 24 single modules in keystone design

module carrier front made of black anodized aluminum
module holder made of plastic with dust protection flaps (other colors available as accessories) removable to the front
integrated cable catch, additional strain relief possible
viewing window for labeling insert
labeling sheet 210 x 297 mm see accessories
grounding bolt M6 x 10 with nut and toothed lock washer
incl. 30 cm grounding cable
all fully shielded modules connected by means of grounding bar

SEE OFFER

ARD PORTENTA H7L - Arduino Pro Portenta H7 Lite, STM32H747, without header 92.12 EUR Use Portenta when performance is critical!

The Portenta H7 Lite is a cost-effective solution for complex environments where wireless connectivity is not suitable or possible. It is perfect for developers who want to harness the processing power of the Portenta H7 without relying on video output or advanced security features.

The Portenta H7 Lite board simultaneously runs high-level code along with real-time tasks.

Program it with high-level languages and AI while performing low-latency operations on its customizable hardware. Its two asymmetric cores allow it to simultaneously run high-level code, such as protocol stacks, machine learning, or even interpreted languages like MicroPython or Javascript along with low-level real-time tasks. The main processor of the Portenta H7 is a ''dual-core unit'' consisting of a Cortex ® M7, running at 480 MHz, and a Cortex ® M4, running at 240 MHz. The two cores communicate via a ''remote procedure call'' mechanism, which seamlessly handles the calling of functions to the other processor.

Both processors share all on-chip peripherals and are executable with

• Arduino sketches on the mbedOS
• native mbed applications
• Micropython / Javascript via an interpreter
• TensorFlow Lite

The Portenta H7 board follows the Arduino MKR form factor, but is also equipped with two 80-pin high-density connectors on the bottom of the board. This ensures scalability for a wide range of applications by simply customizing your Portenta board with a Portenta Shield according to your needs (see ''Accessories and Alternative Products'')

Applications
• high quality industrial machines
• laboratory equipment
• computer vision
• PLCs
• industrial user interfaces
• robotics controls
• mission critical devices
• dedicated stationary computer
• high speed boot calculation (ms)

Technical Data

• STM32H747 dual core processor with graphics engine
• 8 MB SDRAM
• 16 MB NOR flash memory
• 10/100 Ethernet Phy
• USB HS
• Microchip ATECC608 Crypto
• USB-C (Host/Device/PD/High-/Full-Speed)

SEE OFFER

ARD SHD P MKR SD - Arduino shield - MKR SD Proto Shield 25.66 EUR The Arduino MKR SD Proto Shield allows you to easily connect an SD card to your MKR form factor board. There is also a small prototyping area for soldering components.

SEE OFFER

GOOD CONNECTIONS GC 4521-005 - HDMI A male > HDMI A male, 8K@60 Hz, 0,5 m 16.67 EUR The Ultra-High-Speed HDMI® 2.1 cable from Good Connections® guarantees consistently high signal transmission up to 8K / UHD-2 thanks to the combination of a high-quality cable construction with triple cable shielding and connectors with gold-plated copper contacts.

HDMI 2.1 - Resolutions up to 8K / UHD-2 at 60Hz and 4K at 240Hz.
With a bandwidth of max. 48 Gbit/s, this high-quality processed HDMI cable supports resolutions up to 8K / UHD-2 at 60Hz and 4K at 240Hz (color sampling 4:2:0 or DSC) and meets all requirements of the HDMI 2.1 standard. In addition, 32 audio channels are supported at a sample rate / sampling rate of 1,536 kHz. Thus, all known audio formats can be processed, for example, also the spatial sound formats Dolby Atmos, DTS:X and Auro 3D.

High-quality cable construction.
The conductors of this triple-shielded HDMI cable are made of copper (CU). For flawless signal transmission, the HDMI connectors are equipped with gold-plated copper contacts. This high-quality cable construction allows for optimal signal transmission and higher break resistance of the cable.

Selection of supported and tested resolutions:

7680*4320 @30Hz - 4:4:4 Color
7680*4320 @60Hz - DSC enabled

Other features:

Enhanced Audio Return Channel (eARC)
Variable Refresh Rate (VRR)
Quick Media Switching (QMS)
Quick Frame Transport (QFT)
Auto Low Latency Mode (ALLM)
Dynamic HDR Metadata (SMPTE ST 2094)

Technical Specifications:

HDMI 2.1 support, backward compatible with HDMI 2.0 and older versions
Supports 8K / UHD-2 at a frequency of 60Hz (color sampling 4:2:0 or DSC)
Data rate: max. 38.4 Gbit/s (48 Gbit/s minus overhead due to encoding)
HDMI connector gold-plated on both sides with gold-plated copper contacts
Conductor cross section: AWG 30/1
Conductor material: Copper (CU)
Jacket material: PVC
Outer diameter: 6 mm +/- 0.2 mm
Shielding: 3-fold shielded (braided shield, foil shield, wire pair shield)

Color: black
Length: 0.5 m

Note:
Please note that higher color samplings will reduce the refresh rate. The maximum resolution may vary depending on the hardware connected and the system used.

SEE OFFER

SHARKOON SHARK WR200 - Wrist rest, gaming, black 29.54 EUR The WR200 Wrist Rest ensures maximum tension during play with minimum tension in the wrists. The ELITE SHARK series wrist rest raises the position of the wrists to the same level as the keyboard. This ergonomic position facilitates comfortable, focused gaming and typing even after hours of keyboard use. The easy-to-clean imitation leather surface and the memory foam core provide suppleness and comfort, while the non-slip underside ensures that everything stays in place even during hectic gaming situations.

Ergonomic comfort
The ELITE SHARK WR200 wrist rest is coated with easy-to-clean imitation leather, which provides stability and a comfortable grip to the palms and wrists with no visible seams. To make it extra comfortable, the inside of the wrist rest consists of supple memory foam.

SEE OFFER

AKASA RPIC RA13-M2B - Housing for Raspberry Pi 5B, aluminum, black 33.1 EUR The Akasa Pi-5 Pro is a high-quality aluminum case specially designed for the Raspberry Pi 5. With its appealing design, inspired by the clean lines of Art Deco, it combines elegance and functionality. The robust aluminum construction also serves as an efficient heat sink that effectively dissipates heat, enabling fanless operation. This case is ideal for applications such as media centers, overclocking and DAC projects.

Efficient cooling: dual aluminum cores combined with high performance thermal pads effectively dissipate excess heat from the processor, memory, PMIC and Ethernet chips to ensure smooth operation without thermal throttling
Access to ports: full access to GPIO, micro HDMI, Ethernet, USB, camera and display ports
Wi-Fi and Bluetooth connectivity: specially designed window to optimize wireless signal connection
Support for microSD card and on/off switch: easy access to the microSD card slot and the on/off switch of the Raspberry Pi 5
Mounting options: optional DIN rail mounting kit (product code: A-RA08-WKT02) or wall mounting kit (product code: A-RA08-WKT01)

Technical data

Material: black, sandblasted, anodized aluminium
Compatibility: Raspberry Pi 5
Dimensions (LxWxH): 68.5 x 96 x 33.3 mm

The Akasa Pi-5 Pro aluminium case (model A-RA13-M2B) combines an elegant design with efficient passive cooling and practical features to protect your Raspberry Pi 5 and maximize its performance. It is particularly suitable for applications where both aesthetics and functionality are required.

SEE OFFER

Other computer accessories REICHELT IE Best Products

NEOMOUNTS CPU-D075BLACK - PC desk mount 64.22 EUR This NewStar CPU mount, model CPU-D075BLACK, allows you to mount a computer under a desk. A CPU mount creates a need and clean desk because its stored under the desk and doesn’t use any valuable desk space. Increase the lifetime of your CPU due to reduction intake dust and dirt from floors. Keep the workplace clean without computers on the floor.

This NewStar CPU mount allows vertical installation of computers. Hide your cables and keep the workplace nice and tidy.

Easy to adjust in width and depth to fit most desktop and tower PCs. The specifications listed show maximum and minimum width and depth of the mount.

All installation material is included with the product.