Review Metz connect btr 130920 bkke 19 inch keystone module rack 1r

METZ CONNECT BTR 130920-00KE - 19 inch Keystone module rack, 1U, 24 port, light gray, unassembl 71.92 EUR Keystone 19 inch module rack 1U 24 port light grey unassembled, shielded

19 inch 1U module rack for 24 single modules in keystone design

Module carrier front made of silver anodized aluminum
module holder made of plastic with dust protection flaps (other colors available as accessories) removable to the front
integrated cable catch, additional strain relief possible
viewing window for enclosed labeling insert
labeling sheet 210 x 297 mm see accessories
grounding bolt M6 x 10 with nut and toothed lock washer
incl. 30 cm grounding cable
all fully shielded modules connected by means of grounding bar

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130A21-00-E - 19 inch module rack Keystone, 1U, 24 port, stainless steel, uneq 57.76 EUR Keystone 19 inch module rack 1U 24 port stainless steel unassembled

19 inch 1U stainless steel module rack for 24 single modules in Keystone design

Additional strain relief at the patch panel possible by means of cable ties
grounding bolt M6 x 10 with nut and toothed lock washer
incl. 30 cm grounding cable
all fully shielded Keystone modules are connected via the stainless steel module rack

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130921-E - 19 inch module rack, 1RU, 24 port E-DAT, stainless steel, Cat.6a 257.97 EUR E-DAT modul 24x8(8) 1U patch panel Cat.6A, stainless steel

19 inch 1U stainless steel module rack with 24 E-DAT modul single modules

tested: Link up to 500 MHz
suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT
easy-to-install connection of the 2- to 4-pair data cable AWG 26/1 - 22/1 and stranded conductor with 7-wire copper wire AWG 26/7 - 22/7 to BTR 8-way IDC cutting terminals
marking of the wire assignment T568A or T568B
integrated cable support, additional strain relief possible
ground bolt M6 x 10 with nut and toothed lock washer
incl. 30 cm grounding cable
all fully shielded modules connected by grounding bar
Cat.6A component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008)
Compliance with class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130927-1600E - 19 inch module rack, 16 port, MC module, SmartConnect patch pane 65.71 EUR SmartConnect patch panel 16 port MC module

Module holder empty for data, KOAX and fiber optic modules

mounting type: module
Mounting on top hat rail (TH35) or screwable on mounting frame or mounting plate
3-part: Consisting of 1 module holder made of bent sheet metal and 2 milled plastic holders universal
Mounting of the plastic holders on top-hat rail and perforated plate
Functional potential equalization according to DIN EN 50310 (VDE0800-2-310) with 2 screw fastenings possible via grounding screw M6x10 with nut and toothed lock washer
1 labeling strip on module holder

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130927-2400E - 19 inch module rack, 24 port, MC module, SmartConnect patch pane 87.42 EUR SmartConnect patch panel 24 port MC module

Module holder empty for data, KOAX and fiber optic modules

mounting type: module
Mounting on top hat rail (TH35) or screwable on mounting frame or mounting plate
3-part: Consisting of 1 module holder made of bent sheet metal and 2 milled plastic holders universal
Mounting of the plastic holders on top-hat rail and perforated plate
Functional potential equalization according to DIN EN 50310 (VDE0800-2-310) with 2 screw fastenings possible via grounding screw M6x10 with nut and toothed lock washer
1 labeling strip on module holder

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130927-1200E - 19 inch module rack, 12 port, MC module, SmartConnect patch pane 51.24 EUR SmartConnect patch panel 12 port MC module

Module holder empty for data, KOAX and fiber optic modules

mounting type: module
Mounting on top hat rail (TH35) or screwable on mounting frame or mounting plate
3-part: Consisting of 1 module holder made of bent sheet metal and 2 milled plastic holders
Mounting of the plastic holders on top-hat rail and perforated plate
Functional potential equalization according to DIN EN 50310 (VDE0800-2-310) with 2 screw fastenings possible via grounding screw M6x10 with nut and toothed lock washer
1 labeling strip on module holder

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309471002KI - Module housing, flush-mounted, Keystone, 2-port 66.75 EUR Flush-mounted module housing with hinged cover and lock, pure white, 2 ports unassembled for Keystone

Flush-mounted housing for two individual modules in modular design.

2x key & lockable lock
Installation cut-out: Keystone
Hinged cover can be locked when open
With clearly visible labeling field
Supplied without modules and screws for surface mounting

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309471003KI - Module housing, flush-mounted, Keystone, 2-port 66.75 EUR Flush-mounted module housing with hinged cover and lock, gray, 2 ports unassembled for Keystone

Flush-mounted housing for two individual modules in modular design.

2x key & lockable lock
Installation cut-out: Keystone
Hinged cover can be locked when open
With clearly visible labeling field
Supplied without modules and screws for surface mounting

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309470003KI - Module housing, IP44, surface-mounted, Keystone, 2-port 71.92 EUR IP44 surface-mounted module housing with hinged cover and lock, gray, 2 port unequipped for Keystone

IP44 surface-mounted housing for two individual modules in modular design.

2x key & lockable lock
Installation cut-out: Keystone
Hinged cover can be locked when open
With clearly visible labeling field
Supplied without modules and screws for surface mounting

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309470002KI - Module housing, IP44, surface-mounted, Keystone, 2-port 71.92 EUR IP44 surface-mounted module housing with hinged cover and lock, pure white, 2 port unequipped for Keystone

IP44 surface-mounted housing for two individual modules in modular design.

2x key & lockable lock
Installation cut-out: Keystone
Hinged cover can be locked when open
With clearly visible labeling field
Supplied without modules and screws for surface mounting

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130894-0229E - Cable manager 19 inch 1RU 100 mm black RAL9005 82.25 EUR 19 inch 1RU distribution panel for horizontal organization of the patch cables.

Especially suitable for fiber optic patch cables.
5 black plastic cable brackets with large contact surfaces.
Easy mounting of the cable brackets by twisting.
Available as option: plug-mounted nomenclature strip.

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1502577506-E - OpDAT 19 inch, 1U fiber patch panel, 6x LC-D, violet, OM4 175.32 EUR OpDAT fix patch panel splice 6xLC-D (violet), OM4, gray

19 inch, 1U fiber patch panel for fixed installation

equipped with LC-D couplers and LC pigtails
pigtails with compact core ø 0.9 mm, 12 colors, secondary and primary coating same color, length 2.0 m
Pigtails inserted and set down in standard splice cassette with crimp splice holders
pigtails cleaned and inserted into couplers
lightweight aluminum construction with sheet steel front plate
unused knockouts closed with blind plugs
removable front panel for easy adapter mounting
service-friendly, screwed cover
several cable entry options at the rear (mounting with PG13.5, PG16 and PG21 or M20 and M25)
one cable entry PG16 is enclosed

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1502597406-E - OpDAT 19 inch, 1RU fiber patch panel, 6x LC-D, blue, OS2 164.94 EUR OpDAT fix patch panel splice 6xLC-D (blue), OS2, gray

19 inch, 1U fiber patch panel for fixed installation

equipped with LC-D couplers and LC pigtails
pigtails with compact core ø 0.9 mm, 12 colors, secondary and primary coating same color, length 2.0 m
Pigtails inserted and set down in standard splice cassette with crimp splice holders
pigtails cleaned and inserted into couplers
lightweight aluminum construction with sheet steel front plate
unused knockouts closed with blind plugs
removable front panel for easy adapter mounting
service-friendly, screwed cover
several cable entry options at the rear (mounting with PG13.5, PG16 and PG21 or M20 and M25)
one cable entry PG16 is enclosed

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1502597412-E - OpDAT 19 inch, 1U fiber patch panel, 12x LC-D, blue, OS2 216.62 EUR OpDAT fix patch panel splice 12xLC-D (blue), OS2, gray

19 inch, 1U fiber patch panel for fixed installation

equipped with LC-D couplers and LC pigtails
pigtails with compact core ø 0.9 mm, 12 colors, secondary and primary coating same color, length 2.0 m
Pigtails inserted and set down in standard splice cassette with crimp splice holders
pigtails cleaned and inserted into couplers
lightweight aluminum construction with sheet steel front plate
unused knockouts closed with blind plugs
removable front panel for easy adapter mounting
service-friendly, screwed cover
several cable entry options at the rear (mounting with PG13.5, PG16 and PG21 or M20 and M25)
one cable entry PG16 is enclosed

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130B20D21200 - Keystone junction box, UP0, 2 port, unassembled 15.64 EUR Keystone junction box UP0 2 port unassembled

flush-mounted connection unit for single modules in keystone design

plug-in direction of the module inclined 45° downwards
strain relief at the module
without cover parts
compatible with design central pieces of switch programs

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309428103-E - REGplus IP20 Keystone, light grey, unassembled 23.34 EUR Keystone REGplus IP20 light gray unassembled

Connector unit unpopulated for mounting on DIN rail TH35 according to DIN EN 60715

for one single module in keystone design
cable access variable 45° from top or bottom possible, plug-in direction 45° inclined downwards
the width of 1HP allows the installation of up to 12 REGs in standard electrical distribution boards
when installed as a device of protection class I, the potential equalization is carried out directly via the mounting rail by means of an integrated potential equalization plate. The mounting rail must be integrated into the building equipotential bonding system using appropriate measures.
The device is protected against direct contact by a cover. Protection class II is therefore maintained when the device is installed in a distribution board with protective insulation. The equipotential bonding plate must be removed for this purpose.
integrated dust protection flap (also available in color)
suitable modules for cable access 45° from above: C6Amodul K 180°, E-DAT modul coupler 180°, UTP modul Cat.5e and Cat.6, suitable modules for cable access 45° from below: C6Amodul K 270°

ATTENTION
Not suitable for modules in modular design and C6Amodul K 90°!

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309162402KE - Keystone wall outlet US-style 3 port unequipped pure white 11.97 EUR Duct connector to hold three individual modules in Keystone design.

Module plug direction approx. 30° downwards.
Strain relief on module. With dust protector flaps.
Suitable for cable ducts with 45 snap-lock (4.6 mm detent).
Vertical and horizontal mounting direction.

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309172402KE - Keystone wall outlet US-style 4 port unequipped pure white 12.53 EUR Duct connector to hold four individual modules in Keystone design.

Module plug direction approx. 30° downwards.
Strain relief on module.
With dust protector flaps.
Suitable for cable ducts with 45 snap-lock (4.6 mm detent).
Vertical and horizontal mounting direction.

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309150002KE - Keystone wall outlet AP 2 port unequipped 15.07 EUR Very compact surface-mounted termination unit for two individual Keystone modules.

Module plug direction 90° downwards.
Strain relief with cable tie at the module.
With label window for identification labels (labels included in the delivery) and integrated dust protection shutter.
Not suitable for 180° couplers (anti-bend sleeves for patch cables usually too long).

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309192402KE - Keystone wall outlet US-style 6 port unequipped pure white 11.97 EUR Duct connector to hold six individual modules in Keystone design.

Module plug direction approx. 30° downwards.
Strain relief on module.
With dust protector flaps.
Suitable for cable ducts with 45 snap-lock (4.6 mm detent).
Vertical and horizontal mounting direction.

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309152402KE - Keystone wall outlet US-style 2 port unequipped 12.53 EUR Flush-mounted termination unit for individual Keystone modules,

US style 70 x 115 mm.
Straight plug direction.
strain relief on module.

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309140002KE - Keystone wall outlet AP 1 port unequipped 12.02 EUR Very compact 1-port surface-mounted termination unit for one individual Keystone module.

Module plug direction 90° downwards. Strain relief with cable tie at the module.
With label window for identification labels (labels included in the delivery) and an integrated dust protection shutter.
Not suitable for 180° couplers (anti-bend sleeves for patch cables usually too long).

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309151002KE - Keystone wall outlet 2 port unequipped 16.88 EUR 2-port flush-mounted termination unit for two individual Keystone modules,

DE style 80 x 80 mm. Plug direction approx. 30°.
Strain relief with cable tie at the module.
With label window for identification labels (labels included in the delivery) and integrated dust protection covers.

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309190002KE - Keystone surface mount wall outlet 6/12 port unequipped 21.27 EUR Very compact 6/12-port surface-mounted termination unit for six/twelve individual Keystone modules.

Module plug direction 90° downwards.
Strain relief with cable tie at the module.
With shielded modules suitable for 6 modules.

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130915J4502K - Keystone wall outlet 45x45 2 port unequipped pure white 13 EUR Duct connector to hold two individual modules in Keystone design.

Module plug direction approx. 30° downwards. Strain relief on module. With dust protector flaps.
Suitable for cable ducts with 45 snap-lock (4.6 mm detent).
Vertical and horizontal mounting direction.

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130894-0129E - Cable manager 19 inch 1RU 56 mm black RAL9005 66.75 EUR 19 inch 1RU distribution panel for horizontal organization of the patch cables.
Especially suitable for fiber optic patch cables. 5 black plastic cable brackets with large contact surfaces.
Easy mounting of the cable brackets by twisting. Available as option: plug-mounted nomenclature strip.

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130C370002-I - CAT.6A module 1 port AP pure white 30.57 EUR E-DAT C6A 1 port AP pure white

Surface mount termination unit with one or two 8-pin RJ45 jacks

Cat.6A component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified
Compliance with class EA up to 500 MHz according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
Tested: Component up to 600 MHz, Link up to 800 MHz
suitable for 10 GBit Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT
HF-optimized and ergonomically shaped LSA terminal block
Screwing of the flap for strain relief and shield removal is done from the front
Connection of data lines AWG26/1 - 22/1 (single-wire)
Mating direction 45° downward inclined
With viewing window for enclosed labeling insert
Labeling sheet 209 x 294 mm see accessories
Integrated dust protection flaps (also available in color)
Cover parts pure white RAL 9010 or pearl white RAL 1013
Variants: 1 port pure white, 1 port pearl white, 2 port pure white, 2 port pearl white

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309130002-E - CAT.6A module 3 port AP pure white 46.08 EUR E-DAT module 3 port AP Cat.6A, pure white

Surface mount termination unit with E-DAT module

Cat.6A component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified
Compliance with class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
Tested: Link up to 500 MHz
Suitable for 10 GBit Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT
Easy to install connection of 2- to 4-pair data cable AWG 26/1 - 22/1 and stranded conductor with 7-wire copper wire AWG 26/7 - 22/7 to BTR 8-way IDC cutting terminals
Identification of the wire assignment T568A or T568B
Mating direction of the module 45° tilted down
Tongue relief with cable tie on the module
With viewing window for enclosed labeling insert
See accessories for 209 x 294 mm labeling sheet
integrated dust protection flaps (also available in color)
Color of cover parts pearl white RAL 1013 or pure white RAL 9010, surface matt textured
Variants: 1 port, 2 port, 3 port
Color variants: pure white and pearl white

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309471002-I - Module housing, flush-mounted, MC module, 2-port 66.75 EUR Flush-mounted module housing with hinged cover and lock, pure white, 2 ports unassembled for MC module

Flush-mounted housing for two individual modules in modular design.

2x key & lockable lock
Installation cut-out: MC module
Hinged cover can be locked when open
With clearly visible labeling field
Supplied without modules and screws for surface mounting

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309471003-I - Module housing, flush-mounted, MC module, 2-port 66.75 EUR Flush-mounted module housing with hinged cover and lock, gray, 2 ports unassembled for MC module

Flush-mounted housing for two individual modules in modular design.

2x key & lockable lock
Installation cut-out: MC module
Hinged cover can be locked when open
With clearly visible labeling field
Supplied without modules and screws for surface mounting

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130B12D31102 - CAT.6A module 3 port UPk pure white 40.91 EUR C6Amodul 3 Port 270°M UPk pure white

Channel connection unit with C6Amodul 270°

GHMT Cat.6A re-embedded PVP certified
Cat.6A component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified
Compliance with class EA up to 500 MHz according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
Tested: Component up to 600 MHz, Link up to 800 MHz
Suitable for 10GBit Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT
Connection of data lines AWG 26/1 - 22/1 (solid) and AWG 26/7 to 22/7 (stranded) to IDC cutting terminals
Mating direction of the module tilted 45° down
Tongue relief with latching clip on loading piece
With viewing window for enclosed labeling insert
See accessories for 209 x 294 mm labeling sheet
integrated dust protection flaps (also available in color)
Cover parts pure white RAL 9010, surface matt textured
Compatible with design central pieces of switch programs (Attention 3 port central pieces currently only available from the company JUNG)
Suitable for mounting in standard flush-mounted and cavity wall cups, except variant 3 Port!
Variants: 1 port, 2 port, 3 port

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309131200-E - CAT.6A module 3 port UP 40.18 EUR E-DAT module 3 port UP0 Cat.6A

Channel connection unit with E-DAT module

Cat.6A component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified
Compliance with class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
Tested: Link up to 500 MHz
Suitable for 10 GBit Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT
Easy to install connection of 2- to 4-pair data cable AWG 26/1 - 22/1 and stranded conductor with 7-wire copper wire AWG 26/7 - 22/7 to BTR 8-way IDC cutting terminals
Identification of the wire assignment T568A or T568B
Mating direction of the module 45° tilted down
Tongue relief with cable tie on the module
Compatible with design centerpieces of switch programs (Attention 3 port centerpieces currently only available from the company JUNG)
Not suitable for mounting in standard flush-mounted and cavity wall cups!
Variants: 1 port, 2 port, 3 port

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130B11-Z - Cat.6a module, RJ45 20.23 EUR C6Amodul 180° Jack

This flexible, modular core of the system ensures a general cabling basis, regardless of which communication application it is used for.

modular Cat.6A connection unit RJ45
Installation form: module, cable feed 180°
robust, one-piece and reusable module housing made of die-cast zinc, finished
Installation without special tools, strain relief via latching clip directly on the loading piece
Special tool-free migration to 25G systems
Easy-to-install connection of data cables AWG 26/1 - 22/1 (solid) and AWG 26/7 to 22/7 (stranded) to IDC cutting terminals
Intelligent cable management in the charging unit, also suitable for heavily twisted cables
T568A and T568B wire assignment marking directly on the charging unit
GHMT Cat.6A re-embedded PVP certified
Cat.6A component testing in accordance with ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified
Compliance with class EA up to 500 MHz according to ISO/IEC 11801, DIN EN 50173-1
tested: component up to 600 MHz, link up to 800 MHz
Suitable for 10 Gbit Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130C380002-I - CAT.6A module 2 port AP pure white 30.57 EUR E-DAT C6A 2 port AP pure white

Surface mount termination unit with one or two 8-pin RJ45 jacks

Cat.6A component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified
Compliance with class EA up to 500 MHz according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
Tested: Component up to 600 MHz, Link up to 800 MHz
suitable for 10 GBit Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT
HF-optimized and ergonomically shaped LSA terminal block
Screwing of the flap for strain relief and shield removal is done from the front
Connection of data lines AWG26/1 - 22/1 (single-wire)
Mating direction 45° downward inclined
With viewing window for enclosed labeling insert
Labeling sheet 209 x 294 mm see accessories
Integrated dust protection flaps (also available in color)
Cover parts pure white RAL 9010 or pearl white RAL 1013
Variants: 1 port pure white, 1 port pearl white, 2 port pure white, 2 port pearl white

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130894-0103E - Cable manager 19 inch 1RU 56 mm gray RAL7035 67.78 EUR 19 inch 1RU distribution panel for horizontal organization of the patch cables.
Especially suitable for fiber optic patch cables. 5 black plastic cable brackets with large contact surfaces.
Easy mounting of the cable brackets by twisting. Available as option: plug-mounted nomenclature strip.

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 1309450003-E - E-DAT module housing, IP20, surface mount 37.85 EUR E-DAT modul IP20 surface mount housing

IP20 surface mount housing for two single modules in modular design

Identical to module IP44 AP, but due to opening in the housing cover it remains closed when patch cables are plugged in
cable feed for one or two cables from above
unbreakable
Color gray

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130910KI - E-DAT modul Cat.6A K jack - Keystone style 20.28 EUR

modular termination unit Cat.6A, RJ45
component testing for Cat.6A to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), certified to GHMT
compliance with class EA to ISO/IEC 11801
Ed.2.2:2011-06, DIN EN 50173-1:2011-09
tested: Link up to 500 MHz
suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT
easy to install connection of 2 to 4 pair data cables
AWG 26/1 to 22/1 (solid wire) and stranded wires with 7 copper conductors AWG 26/7 to 22/7 to insulation displacement connectors (IDC)
marking of conductor assignment to T568A and T568B
easy and fast insertion of wire pairs in E-DAT modul stuffer cap
module housing made of refined zinc die-casting
mounting without special tools
strain relief with cable tie at the module
mounting version: Keystone
cable feed 180°

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130B21-Z - CAT.6A Module K 180° Jack, single 20.23 EUR C6A Module K 180° Jack - Keystone

Modular Cat.6A connection unit RJ45

mounting style: keystone, cable entry 180°.
robust, one-piece and reusable module housing made of zinc die-cast, finished
mounting without special tools, strain relief via snap-in clip directly at the loading piece
special tool-free migration to 25G systems
easy connection of data cables AWG 26/1 - 22/1 (solid) and AWG 26/7 to 22/7 (stranded) to IDC terminals
intelligent cable management in the charging unit, also suitable for heavily twisted cables
marking of the wire assignment T568A and T568B directly on the charging unit
GHMT Cat.6A re-embedded PVP certified
Cat.6A component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified
Class EA compliance up to 500 MHz according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
tested: Component up to 600 MHz, Link up to 800 MHz
suitable for 10GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT

Note

This is a single module

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130910-I - E-DAT module Cat.6A 8 (8) socket, T568A 19.2 EUR E-DAT module Cat.6A 8(8) socket, T568A

• Modular connection unit Cat.6, RJ45
• GHMT Cat.6 de-embedded PVP certified
• Compliance with Class EA in accordance with ISO / IEC 11801 Ed.2.2: 2011-06, DIN EN 50173-1: 2011-09
• Tested: Link up to 500 MHz
• Suitable for 10 Gbit in accordance with IEE 802.3an
• Suitable for Power over Ethernet (PoE, PoE Plus and UPoE)
• Easy-to-assemble connection of 2 to 4-pair data cables, AWG 26/1 - 22/1, and stranded-wire conductors with 7-strand Cu wire, AWG 26/7, to BTR 8x IDC connectors
• Identification of T568A or T568B wire assignment
• Quick and easy insertion of pairs of wires into the E-DAT module loading section
• Module housing in refined die-cast zinc
• Assembly without special tools
• Strain relief with cable tie on module
• Installation type: Module
• 180° cable feed
• Variant: T568A

Only for mounting in E-DAT-compatible housings, patch panels, etc.!

SEE OFFER SEE OFFER ebay

METZ CONNECT BTR 130920-BKKE - 19 inch Keystone module rack, 1RU, 24 port, black, unassembled

Comparison of Similar Products