Building supplies
The Best
- Lead-free and halogen-activated for professional results
- Ideal for electrical engineering, electronics and fine soldering
- High temperature resistance and optimum wetting
- Corrosion-free flux residues - no subsequent cleaning necessary
- Suitable for soldering iron temperatures up to 450 °C
- Compatible with CFH soldering equipment and accessories
The CFH EL 324 electronic solder (item no.: 52324) is the ideal solution for precise soldering work in electrical engineering, electromechanics and electronics. The flux-filled, halogen-activated soft solder wire impresses with its high temperature resistance, optimum wetting and above-average spreading values. With a composition of Sn99.24Cu0.7Ni0.05Ge0.01, it is lead-free and meets the highest quality standards. Suitable for soldering iron temperatures up to 450 °C (optimum 370-380 °C). The solid flux residues are corrosion-free and can remain on the solder joint. Cleaning with circuit board cleaners is recommended for HV and HF applications.
Scope of delivery: 1 spool of EL 324 electronic solder (70 g, Ø 1.0 mm)"
Excellent
This professional-grade insulating tape features an elasticated backing material coated with a highly effective adhesive.
It is ideal for the electrical primary insulation of all wires and cable connections up to 600 V and offers long-term, moisture-proof electrical and mechanical protection for a wide range of temperature applications from 18°C to 90°C in accordance with VDE.
Its excellent elasticity, flexibility and restoring force over the entire temperature range enables wrinkle-free wrapping.
It provides excellent protection against abrasion, copper corrosion, oil, solvents and UV radiation.
Scotch Super 33+ vinyl electrical insulation tape is flame retardant to UL 510 and certified to UL, CSA and VDE.
Recommended
Areas of application
- Elastic joints and seals in caravan and motorhome construction
- Bonding roofs on buses, caravans and motorhomes
- Bonding edge profiles of trailers with aluminium or polyester
- Bonding polyester parts with metal frames
- Bonding floor systems
- Sealing of welding seams
Features
- Free of solvents, isocyanate and PVC
- Excellent resistance to UV and ageing
- Generally good adhesion without priming on different substrates, e.g. Dekasyl MS-2 can be used as a sealant for PVC floor coverings
- Permanently elastic in the temperature range from -40°C - +120°C
- Neutral, odourless and fast curing
- After forming the skin, it can be painted over (wet to wet) - this generally does not affect the curing
- Compatible with most industrial coating or painting systems, both alkyd resin and dispersion paints
Featured
High-quality due to particularly fine copper powder and drip-free base grease.
Contains anti-corrosion additives, water-resistant and separating effect up to 1100°C. Applications include as screw paste, separating paste for connections and as brake pad paste.
Alternative
- Very large selection of materials and sizes
- High holding force with very low snapping force
- Use of high quality plastic
- Supports our customers' recycling goals
- Internal toothing for a secure hold on the bundle
- Comfortable loop-in due to angled end of the strap
- Simple processing by hand or with tools (process-safe)
- Floor marking for long-term labelling indoors
- Marking tape corresponding to ASR A1.5/1.2 ""Floors"" according to DIN 51130 Anti-slip (R-group) R9
- Suitable for forklifts*
- Colours similar to RAL 9003 Signal white, 3001 Signal red, 1003 Signal yellow, 6032 Signal green, 5005 Signal blue
- Dimensions (W x H x L): 50 mm x 0.5 mm x 30 m
*Except for steering, braking and turning movements"
- Extra strong floor marking for long-term labelling of interior floors
- Wear-resistant and durable marking tape made from extruded material with tape thickness of 1.2 mm and bevelled edges
- Marking tape corresponding to ASR A1.5/1.2 ""Floors"" according to DIN 51130 Anti-slip (R-group) R10
- Suitable for forklifts*
- Colours similar to RAL 9003 Signal white, 3001 Signal red, 1003 Signal yellow, 6032 Signal green, 5005 Signal blue
- Dimensions (W x H x L): 50 mm x 1.2 mm x 30 m
*Except for steering, braking and turning movements"
Cable junction box according to DIN EN 60670. Flame retardant according to DIN EN 60695-2-11, test temperature 650°C. Impact resistance IK05 according to DIN EN 50102.
Areas of application
- Elastic joints and seals in e.g. bus, caravan, train and lorry construction
- Elastic joints and seals in air and ventilation systems
- Sealing of joints around windows, doors etc.
- Seals in the wood and metal industry
- Sealing of GRP or aluminium to painted sheet metal wall
Features
- Free of solvents, isocyanate, silicone and PVC
- Good resistance to UV and ageing
- Generally good adhesion without priming on different substrates
- Permanently elastic in the temperature range from -40°C - +100°C
- Neutral and fast curing
- Suitable for sanitary facilities (fungicide resistant)
- Compatible with most industrial coating or painting systems, both alkyd resin and dispersion paints
The silver-coloured protective coating has a high temperature resistance of up to 600°C and is therefore used in particular for the decorative long-term protection of exhaust and combustion systems.
Das extra starke, widerstandsfähige und langlebige doppelseitige Klebeband
Mit seinem besonders starken Halt eignet sich das Pattex Kleben statt Bohren Klebeband zur Montage z. B. von Hinweisschildern, Küchentafeln, Wandbildern, Utensilien und vielem mehr, ganz ohne Bohren, Schrauben, Dübel oder Bohrlärm! Mit dem praktischen Helfer für Haus und Garten ist der Montagekleber zur Befestigung vieler Materialien wie etwa Spiegel**, Metall, Holz, Stein oder Kunststoff* auf saugenden und nicht saugenden Untergründen geeignet und klebt auch auf porösen Oberflächen. Dabei ist das Tape besonders widerstandsfähig: Seine Witterungs- und UV-Beständigkeit machen das Doppelklebeband auch perfekt für den Außeneinsatz, wo es wie alle Pattex Klebstoffe eine extreme Langlebigkeit aufweist. Eine ganze Rolle beidseitiges Klebeband trägt dabei bis zu 120 kg Gewicht.
*Nicht geeignet auf Silikon oder gewachsten und geölten Oberflächen, PTFE, Tapeten oder Altanstrichen, Lehmputze, unbefestigte Oberflächen o.Ä., auf PE und PP prüfen.
- Ideal für Montagearbeiten in Haus und Garten, für starken Halt ohne Lärm und Bohrlöcher: Doppelseitiges Klebeband von Pattex Kleben statt Bohren
- Mit den vielseitigen Klebestreifen lassen sich viele Projekte umsetzen: Wandbefestigung von Hinweisschildern, Spiegeln**, Hausnummern, Bildern u.v.m.
- Es lassen sich eine Vielzahl von Materialien mit dem starken Tape verwenden: Spiegel**, Metall, Holz oder Kunststoff
- Seine Wasserresistenz und extreme Witterungsbeständigkeit zeichnet das Doppelklebeband aus. Es ist zudem extrem langlebig und trägt bis zu 120 kg
- High-quality insulating tape available in many colours and dimensions
- Marking, labelling and bundling of cables and wires
- Insulating, protecting, repairing and maintaining cable sheaths and connections
- Good abrasion resistance, resistant to moisture and chemicals
- Very flexible with high adhesion
- Suitable for mechanical and electrical applications up to 1 kV
- Meets IEC 60454-3-1-6/F-PVCP/90 requirements
- Self-extinguishing in accordance with IEC 60454-2
- Very large selection of materials and sizes
- High holding force with very low snapping force
- Use of high quality plastic
- Supports our customers' recycling goals
- Internal toothing for a secure hold on the bundle
- Comfortable loop-in due to angled end of the strap
- Simple processing by hand or with tools (process-safe)
- High viscosity
- Medium strength
- Normally dismountable
- Wooden floor repair wax kit for repairing damaged wooden flooring such as parquet, laminate and floorboards as well as other horizontal wood surfaces subject to high loads
- The hard wax must be melted prior to filling using the edding 8903 wooden floor wax heating iron
- The various wax shades can be mixed to perfectly imitate the grain
- The hard waxes consist of a mix of mineral waxes and are coloured with earth and oxy colours
- Extra strong floor marking for long-term labelling of interior floors
- Wear-resistant and durable marking tape made from extruded material with tape thickness of 1.2 mm and bevelled edges
- Marking tape corresponding to ASR A1.5/1.2 ""Floors"" according to DIN 51130 Anti-slip (R-group) R10
- Suitable for forklifts*
- Colours similar to RAL 9003 Signal white, 3001 Signal red, 1003 Signal yellow, 6032 Signal green, 5005 Signal blue
- Dimensions (W x H x L): 50 mm x 1.2 mm x 30 m
*Except for steering, braking and turning movements"
The mechanical, electronic and radio-controlled roller shutter motors from superrollo make it possible for anyone to bring movement to their roller shutters.
Slipped into the roller shutter shaft and connected to a 230V power supply, the roller shutters are operated fully automatically
- Convenient - automation of the roller shutter to open and close it at the touch of a button or time control
- Simple - quick installation and commissioning: slide into the existing roller shutter shaft, connect, adjust, done!
- Up to 12 m² roller shutter area
- Wired
- For 60 mm octagonal steel shafts
The large range of motors with different power ratings offers the ideal motor for every requirement.
Ideal for new build projects and retrofitting!
Scope of delivery
- 1x tubular motor
- 1x adjustment tool
- 1x driver
- 1x safety clip
- 2x split pin
- 1x drive bearing
- 1x adapter
These thermostats can be extended by an external sensor (CT04-10K).
Benefits PT713:
- 9 weekly programs with 6 temperature changes per day
- Backlit display
- Selection of the PI control or hysteresis
- Sets the minimum time for switching on the heat source
- Optimal start (set temperature will reach the set time)
- OPERATING MODULES: AUTO/MANU/OFF/HOLIDAY/SUMMER
- Sets the maximum limit value for the floor temperature
- Setting of the minimum limit value for the floor temperature with the possibility to determine a time period in which the temperature is to be kept
- Even/odd week choice
- ""Window open"" function (automatic lowering mode in case of sudden temperature drop)
- Rapid change in the required temperature
- Information of operating hours
- Function TEST to check the correct connection
- Child Safety Lock - Key Lock
- Power reserve more than 100 hours in the event of a power failure
- Easy installation - System PLUG-IN
TECHNICAL PARAMETERS
Supply 230 V/ 50 Hz
Number of adjustable temperatures 6 per day
Hysteresis 0.1°C to 5°C.
Minimum programming time 10 min.
Adjustable temperature range +3°C to +99,5°C.
Temperature setting after 0.5°C.
Minimum display 0.1°C.
Measurement accuracy ±0.5°C.
Power reserve in case of power failure (NiMH) more than 100 hours
Protection class IP20
Output (potential-free contacts) max. 12 a, 2760 W.
Working temperature 0°C to +40°C."
PCB flushing for electrical installations and equipment. CONTACT LS is a special cleaning fluid with high dissolving power for a wide range of dirt and is ideal for flushing out cabinets, equipment, transformer systems and motors quickly. CONTACT LS is highly compatible with electronic assemblies and evaporates quickly and without leaving a residue. The special pistol spray head allows for quick cleaning with high spraying pressure.
Can size: 500 ml
WEICON Zinc-Alu Spray forms a fast drying and adherent protective layer and is resistant to many chemicals. Zinc-Alu Spray is dust-dry after approx. 15 minutes and can be smoothed and painted over without pre-treatment after around 12 hours.
Toolless assembly
The cable duct is provided with an adhesive tape on the bottom and can therefore be easily and simply attached e.g. to the floor, wall, window frame or baseboard. The adhesive tape also ensures a firm and secure hold.
Self-closing
The cable duct closes automatically after adding the cables.
Reusable
The cables can be added or removed multiple times.
Specification
- self-adhesive
- Reusable
- Individually shortenable
- Environmental temperature: -40 °C ~ 65 °C
- Material: PVC
- Colour: white
- Dimensions (LxWxH): ca. 1000 x 10 x 10 mm
Package content
- Cable duct
Package
- White Box
- High-quality insulating tape available in many colors and dimensions
- Mark, tag, and bundle cables and wires
- Isolate, protect, repair, and maintain cable sheaths and connections
- Good abrasion resistance, resistant to moisture and chemicals
- Very flexible with high adhesion
- Suitable for mechanical and electrical applications up to 1 kV
- Meets IEC 60454-3-1-6/F-PVCP/90 requirements
- Self-extinguishing according to IEC 60454-2
- High-quality insulating tape available in many colors and dimensions
- Mark, tag, and bundle cables and wires
- Isolate, protect, repair, and maintain cable sheaths and connections
- Good abrasion resistance, resistant to moisture and chemicals
- Very flexible with high adhesion
- Suitable for mechanical and electrical applications up to 1 kV
- Meets IEC 60454-3-1-6/F-PVCP/90 requirements
- Self-extinguishing according to IEC 60454-2
The WD-40 Multi-Use Product Flexible protects metal against rust and corrosion, penetrates stuck parts, displaces moisture and lubricates almost everything. It even removes grease, rust and other dirt from surfaces.
Flexible - benefits of the product:
WD-40® Flexible features an innovative metal straw that can be bent into your desired shape, making it ideal for hard-to-reach areas.
- For hard-to-reach areas
- Flexible, retains the desired shape
- Can be operated using just one hand
The intelligent spray head with integrated metal straw prevents the straw becoming lost and can be used for precision spraying as well as to spray a wide area. To spray a wide area, fold the metal straw downwards. For precision spraying, ensure that the metal straw is in a horizontal position. The 360° valve allows the can to be used both upright or upside down, making it ideal for almost any application.
Recommended for:
Gardening tools and equipment
Battery connections
Bicycle frames
Door locks and hinges
Power tools
Motors
Alloys
Exhaust systems"
Features
The roller shutter switch has a two-way hold-to-run control device with which the roller shutter can be opened and closed at the touch of a button.
The appropriate removable frame is included in the scope of delivery of the rocker switch.
Advantages
- Easy operation (manual control of a tubular motor)
- Simple installation
- Flush mounting
- Suitable for use in removable frames
Areas of application
- Rocker switch for manual control of a roller shutter motor
- For mounting under the plaster
- For removable frame
Included in the delivery
1x touch/locking toggle switch
1x removable frame"
- Floor marking for long-term labelling indoors
- Marking tape corresponding to ASR A1.5/1.2 ""Floors"" according to DIN 51130 Anti-slip (R-group) R9
- Suitable for forklifts*
- Colours similar to RAL 9003 Signal white, 3001 Signal red, 1003 Signal yellow, 6032 Signal green, 5005 Signal blue
- Dimensions (W x H x L): 50 mm x 0.5 mm x 30 m
*Except for steering, braking and turning movements"
Technical data
- Article: Rubber speaker sealing tape
- Type: self-adhesive
- Colour: black
- Material: Foam rubber
- Operating temperature: 0 - 40°C
- Dimensions: 2 mm x 20 mm
- Length: 10 m
- Suitable for: black speaker boxes
WEICON Contact VA 8312 is suitable for bonding various rubber materials, such as solid rubber or foam rubber, plastics and EPDM elastomers. In combination with WEICON CA-Primer, VA 8312 is also suitable for polyolefins (polyethylene (PE), polypropylene (PP)). In combination with WEICON Contact Filler, WEICON Contact VA 8312 is suitable for the instant bonding and filling of cracks, gaps, holes and irregularities.
Properties:
- Very fast soaking (saves working time)
- Highly effective due to special active surfactant combination (much faster than dishwashing detergent)
- High-yielding concentrate
- Without foaming
- Approximately 5-10 minutes
- Neutral odour
- Solvent-free
- Range up to 400 m² per litre
Intended use:
- For effective removal of wallpaper and woodchip
- Wash-off of distemper paints
Processing instructions:
- The solution prepared according to the instructions for use is applied liberally with a ceiling brush, twice if necessary
- Roughen water-permeable and multi-layer glued/overpainted wallpapers with coarse sandpaper, needle roller or similar before soaking
- We do not recommend spraying or fogging
- Application temperature: Substrate and ambient temperature not below 10°C
Special instructions:
- Clean work equipment with water immediately after application
- Avoid contact with eyes, if necessary (e.g. when working overhead) wear protective goggles
- Consumption approx. 100 ml/m²
WEICON PTFE Spray adheres to all metal, plastic and wood surfaces. Its high PTFE content greatly reduces the friction coeffi cient. The coating repels dirt, dust and water and is resistant to oils, greases and many chemicals.
PTFE Spray can be used on runners and guides, conveyor belts, transport rollers, slides, windows, cutting tools and packing machines. It can also be used as a permanent lubricant for shafts in plastic bearings, as a water-rejecting coating for paper seals, cork seals and seal packaging, as a substitute for release agents containing silicone, and wherever oil or grease lubrication is not permitted or desired. The product can be used in many industrial applications.
- The ideal solution for bundling, protecting and fastening cables
- Easy and effortless to use
- Good abrasion protection
- Cables can be run along the entire length
- Can be reused
- Available in different colours and sizes
- HAT winding tool included
Ideal for bundling and protecting cables and wires, quick and easy to reopen. Due to its excellent flame-retardant properties, Helawrap polyamide 6 V0 is suitable for use in areas with high fire safety requirements.
The Helawrap cable management system is the ideal solution for bundling, protecting and fastening cables and wires in industrial environments. The Helawrap clips and mounting plates help to organise, guide and securely fasten Helawrap protective hoses. Thanks to the special profile and the practical winding tool, Helawrap can be processed quickly and effortlessly. The new profile allows for flexible design of individual cables along the entire length of the hose. Helawrap can be reused at any time. Helawrap is available in two highly stable materials. The winding tool is supplied."
