CFH 52324 - Electronics solder EL 324 lead-free 70 g
25.44 EUR
Access the complete sheet with information, compare prices and identify the features of PRODUCTNAME, available at the price of PRICE CURRENCY; it inserts into the CATEGORY NAME; the product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
EAN: 4001845523248
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
- Filled with flux-powder for fine soldering in electronics and electrical engineering
- Sn100Ni+, EN ISO 9453, 9454
- 70g
- Filled with flux-powder for fine soldering in electronics and electrical engineering
- Sn100Ni+, EN ISO 9453, 9454
- 70g
EAN: 4001845523248
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
CFH 52329 - Craft solder BL 329 lead-free 70 g
25.44 EUR
- Filled with flux-powder for general soldering
- Not suitable in electronics
- Sn99Cu1, EN ISO 9453, 9454
- 70g
GOOBAY GB 40843 - Lead-free solder with silver and copper, diameter 1.0 mm, 17 g
15.94 EUR
Composition: 0.3% silver, 0.7% copper, 96.5% tin, flux content: 2.5%, 217°C melting point- Environmentally friendly brand solder
- Improved electrical conductivity due to silver content (0.3%)
- No cleaning of the solder joints after soldering necessary
- With continuous flux cores
STANNOL STA 611 TC 0,3 - Lead-free solder with copper, Ø 0.3 mm, 250 g
83.33 EUR
The Kristall 611 TC solder wire is based on a halogen-activated ''No-Clean'' flux. It has been developed for high requirements in conventional soldering and for soldering SMDs in industrial production, as well as for repair and resoldering work.The Kristall 611 TC wire flux is a well activated flux based on synthetic resins and combines high activity and very good flow properties with small amounts of solid and electrically safe residues to produce an excellent product.
Product benefits:
- Only slightly coloured No-Clean residues
- Fast soldering even on surfaces that cannot be soldered perfectly
- Low spatter
- Mild odour
Areas of application:
Kristall 611 TC can be used for manual and machine soldering in electrical engineering and electronics and shows its strengths where wettability is not always perfect and it has to be fast.
STANNOL STA 611 TSC 0,3 - Lead-free solder containing silver and copper, Ø 0.5 mm, 250 g
112.27 EUR
The Kristall 611 TSC solder wire is based on a halogen-activated ''No-Clean'' flux. It has been developed for high requirements in conventional soldering and for soldering SMDs in industrial production, as well as for repair and resoldering work.The Kristall 611 TC wire flux is a well activated flux based on synthetic resins and combines high activity and very good flow properties with small amounts of solid and electrically safe residues to produce an excellent product.
Product benefits:
- Only slightly coloured No-Clean residues
- Fast soldering even on surfaces that cannot be soldered perfectly
- Low spatter
- Mild odour
Areas of application:
Kristall 611 TC can be used for manual and machine soldering in electrical engineering and electronics and shows its strengths where wettability is not always perfect and it has to be fast.
STANNOL STA 511 TC 0,3 - Lead-free solder with copper, Ø 0.3 mm, 250 g
83.33 EUR
Stannol solder wire Crystal 511Flux-cored No-Clean solder wire with transparent residues
Stannol Crystal solder wires can be used for repair work and make any further cleaning process superfluous.
They are characterised by the following properties:
- Minimal transparent residues
- Low spattering - thermally stable
- Fast soldering through multiple activity levels
- Very good spread on brass, copper and nickel
- Mild odour
Technical data:
Flux type to DIN EN 29454-1 : REM 1 1.2.2
Flux content : 2.7% +/- 0.3%
Acid count (mg/KOH/g) : 170
Halogen content : 1.1%
Corrosive effect : none according to DIN 8516
Alloys : S-Sn99 Cu1 (TC)
STANNOL STA 511 TSC 0,3 - Lead-free solder with silver and copper, diameter 0.3 mm, 250 g
120.54 EUR
Stannol solder wire Crystal 511Flux-cored No-Clean solder wire with transparent residues
Stannol Crystal solder wires can be used for repair work and make any further cleaning process superfluous.
They are characterised by the following properties:
- Minimal transparent residues
- Low spattering - thermally stable
- Fast soldering through multiple activity levels
- Very good spread on brass, copper and nickel
- Mild odour
Technical data:
Flux type to DIN EN 29454-1 : REM 1 1.2.2
Flux content : 2.7% +/- 0.3%
Acid count (mg/KOH/g) : 170
Halogen content : 1.1 %
Corrosive effect : none according to DIN 8516
Alloys : Sn 95 Ag4 Cu1
CFH 52319 - Electronics solder ECO 319 lead-free 70 g
26.48 EUR
- FAIR RESOURCING
- with new flux formulation based on synthetic resins (free of rosin)
- Perfectly tailored to the needs of lead-free soldering technology in assembly production
- Improved soldering properties
- Sn100Ni+ Sn99, 3CuNiGe
- Soft solders from fair resources
- 70g
CFH 52228 - Tinner, sal ammoniac free 15 g
19.24 EUR
- For cleaning and tinning lead-free soldering tips
- Flux-powder type according to DIN EN 61190, metal powder S-Sn97Cu3 according to DIN EN ISO 9453:2006
- Sal ammoniac free (no harmful vapours!)
- Unleaded
- Increases the service life of the soldering tips
- Long durability
- Practical in a resealable tin can with double-sided adhesive pad on the bottom of the can
- Extremely easy to use
- 15 g
FELDER LÖTTECHNIK LZ F4 BF 1,0 250 - Lead-free solder with copper, Ø 1.0 mm, 250 g
33.71 EUR
Solder wire, ''Ultra-Clear'' ISO core- High wetting rate, spreads across all conventional electronic surfaces
- No flux spatter on the components, equipment or the operator's hands
- Crystal-clear flux residue to improve appearance
- Minimal emission of fumes and neutral odour reduces workplace contamination
- Residue easily removed from soldering tips using conventional means (FELDER Tinner, solder sponge, steel wool)
- Flux type REL0 in accordance with J-STD-004 and DIN EN 61190-1-3 for component production
- The service life of the soldering iron tips is extended considerably
Alloy:
Sn99.3 CuNiGe, according to Fuji DE patent no. 19816671C2, Sn99.25/Cu0.7/Ni0.05, EN ISO 9452:2014
Flux content: 2.2%
Lead-free: Yes
Melting point: 227°C
CFH 52334 - Radio solder RL 334 lead-free 70 g
25.44 EUR
- Filled with flux-powder for fine soldering, plumbing, telecommunications and general soldering
- Sn99Cu1, EN ISO 9453, 9454
- 70g
CFH 52317 - Electronics soldering Paste LP 317
16.67 EUR
Flux powder for soft soldering in electrical engineering and electronics - Contains halogen, active
- 20 g
- DIN EN ISO 9454-1:2016/1123
Note: The solder paste is active halogen-based, so the flux residues must be removed.
EDSYN CR 77 - Solder paste, CR 77, lead free, no-clean, Sn42Bi58, 10 g
35.78 EUR
NO-CLEAN SMD solder paste, Sn96.5AgCu0.5, as per F-SW32, lead-free, 10 g (5 ml) syringeEasy handling, user-friendly, saves time when soldering SOPs, QFPs, PLCCs etc.
The RMA paste corresponds to MIL-QQ-S571e.
FELDER LÖTTECHNIK LZ F4 BF 0,5 250 - Lead-free solder with copper, Ø 0.5 mm, 250 g
39.91 EUR
Solder wire, ''Ultra-Clear'' ISO core- High wetting rate, spreads across all conventional electronic surfaces
- No flux spatter on the components, equipment or the operator's hands
- Crystal-clear flux residue to improve appearance
- Minimal emission of fumes and neutral odour reduces workplace contamination
- Residue easily removed from soldering tips using conventional means (FELDER Tinner, solder sponge, steel wool)
- Flux type REL0 in accordance with J-STD-004 and DIN EN 61190-1-3 for component production
- The service life of the soldering iron tips is extended considerably
Alloy:
Sn99.3 CuNiGe, according to Fuji DE patent no. 19816671C2, Sn99.25/Cu0.7/Ni0.05, EN ISO 9452:2014
Flux content: 2.2%
Lead-free: Yes
Melting point: 227°C
STANNOL STA 611 TSC 1,0 - Solder wire lead-free with silver and copper, Ø 1,0 mm, 250 g
78.16 EUR
The Kristall 611 solder wire is based on a halogen-activated ''no-clean'' flux. It was developed for high demands in conventional soldering and for soldering SMDs in industrial production, as well as for repair and post-soldering.The wire flux Kristall 611 is a well activated flux based on synthetic resins and combines in an excellent way high activity and very good flow properties with small amounts of solid and electrically safe residues.
Product advantages:
- Only slightly coloured no-clean residues
- Fast soldering even on surfaces that are not optimally solderable
- Low spattering behaviour
- Mild odour
Application areas:
The Kristall 611 can be used for hand and machine soldering in the field of electrical engineering and electronics and plays its strengths where the wettability is not always optimal and it has to be done quickly.
FELDER LÖTTECHNIK LZ F4 BF 0,75250 - Lead-free solder with copper, Ø 0.75 mm, 250 g
35.78 EUR
Solder wire, ''Ultra-Clear'' ISO core- High wetting rate, spreads across all conventional electronic surfaces
- No flux spatter on the components, equipment or the operator's hands
- Crystal-clear flux residue to improve appearance
- Minimal emission of fumes and neutral odour reduces workplace contamination
- Residue easily removed from soldering tips using conventional means (FELDER Tinner, solder sponge, steel wool)
- Flux type REL0 in accordance with J-STD-004 and DIN EN 61190-1-3 for component production
- The service life of the soldering iron tips is extended considerably
Alloy:
Sn99.3 CuNiGe, according to Fuji DE patent no. 19816671C2, Sn99.25/Cu0.7/Ni0.05, EN ISO 9452:2014
Flux content: 2.2%
Lead-free: Yes
Melting point: 227°C
STANNOL STA 611 TSC 0,7 - Solder wire lead-free with silver and copper, Ø 0,7 mm, 250 g
81.26 EUR
The Kristall 611 solder wire is based on a halogen-activated ''no-clean'' flux. It was developed for high demands in conventional soldering and for soldering SMDs in industrial production, as well as for repair and post-soldering.The wire flux Kristall 611 is a well activated flux based on synthetic resins and combines in an excellent way high activity and very good flow properties with small amounts of solid and electrically safe residues.
Product advantages:
- Only slightly coloured no-clean residues
- Fast soldering even on surfaces that are not optimally solderable
- Low spattering behaviour
- Mild odour
Application areas:
The Kristall 611 can be used for hand and machine soldering in the field of electrical engineering and electronics and plays its strengths where the wettability is not always optimal and it has to be done quickly.
STANNOL STA 600 TC 0,3 - Lead-free solder with copper, Ø 0.3 mm, 250 g
83.33 EUR
Kristall 600 Flowtin TC Fairtin, Sn99.3 Cu0.7 (lead-free)- With micro-alloyed additives for extending the service life of soldering tips
- Halogen-free activated to REL0
This no-clean Kristall solder wire is the perfect addition for manual soldering fluxes for no-clean wave soldering and reflow processes. It can also be used during repair work after cleaning has been performed, eliminating the need for further cleaning.
Kristall solder wire lets you quickly solder on copper and brass, as well as on pre-tinned surfaces.
- 5 flux cores for perfect wetting
- Fast soldering (multiple activity levels for all applications)
- Good spreading (on copper, brass and nickel)
- Clear residues
- Thermal stability (low spatter)
- Mild odour
- The 600 series contains micro-alloyed additives to increase the service life of soldering tips
STANNOL STA HS10F TC1,0W - Solder HS10 FAIR lead-free with copper content, Ø 1.0 mm, 5 g
15.43 EUR
Solder wire HS10 FAIR - Fair, ecological, reliable! Practical wrapping card with 5 g for testing the lead-free solder wire HS 10 FAIR FLOWTIN TC+ in development, production and service.The soldering wire HS10 is a product that has been tried and tested for many years and has been developed for high quality requirements in industrial production as well as for fast repair and re-soldering. It is characterized by high activity, i.e. fast spreading and electrically safe residues.
Product advantages:
- halogen activated natural resin (colophony)
- fast spread
- solid, non-sticky residues that may remain on the soldering point
- No-Clean
Areas of application:
The solder wire HS10 can be used for hand and robot soldering in the field of electrical engineering and electronics.
GOOBAY GB 40851 - Solder lead free with silver and copper content,Ø 0,56 mm, 250 g
52.32 EUR
Composition: 0.3% silver, 0.7% copper, 96.5% tin, flux content: 2.5%, 217°C melting point- Environmentally friendly brand solder
- Improved electrical conductivity due to silver content (0.3%)
- No cleaning of the solder joints after soldering necessary
- With continuous flux cores
EDSYN CR 11 - Solder paste, CR 11, lead free, no-clean, Sn42Bi58, 10 g
36.81 EUR
Lead-free ''NO-CLEAN'' - SMD - solder paste CR 11 solder paste is a sophisticated, high-tech product that is ideally suited for all types of lead-free SMD applications. Its processing temperature of approximately 215 - 260°C means that even the most sensitive components can be soldered. The pure melting temperature in the solder joint is 138°C. This is a very low temperature range, which allows repairs on sensitive components in particular.
The flux composition corresponds to F-SW 32 (DIN EN 29454.1.2.3) with a synthetic base. The flux is completely halogen free.
The solder alloy has the following composition: Sn42Bi58.
Caution: Must not be mixed with leaded material!
The unopened container should be stored at 20°C room temperature. Once opened, the maximum processing time depends on environmental influences.
Instructions for use: After removing the paste, the nozzle must be sealed again as tightly as possible. Used and fresh paste should not be stored together in the same container. Of course, they can be used together during ongoing work. However, different solder alloys and paste types must not be mixed.
Benefits:
- NO-CLEAN paste
- Low processing temperature
- Excellent contour stability
- Minimal solder ball or spatter formation
- Long-term processing and long-term storage possible
- Ideal for ''fine-pitch'' applications
- Excellent soldering results when used with hot air and soldering irons
- Different sizes of conical dispensing needles (optional)
STANNOL STA 611 TC 1,0 - Solder wire lead-free with copper, Ø 1,0 mm, 250 g
41.98 EUR
The Kristall 611 solder wire is based on a halogen-activated ''no-clean'' flux. It was developed for high demands in conventional soldering and for soldering SMDs in industrial production, as well as for repair and post-soldering.The wire flux Kristall 611 is a well activated flux based on synthetic resins and combines in an excellent way high activity and very good flow properties with small amounts of solid and electrically safe residues.
Product advantages:
- Only slightly coloured no-clean residues
- Fast soldering even on surfaces that are not optimally solderable
- Low spattering behaviour
- Mild odour
Application areas:
The Kristall 611 can be used for hand and machine soldering in the field of electrical engineering and electronics and plays its strengths where the wettability is not always optimal and it has to be done quickly.
STANNOL STA 611 TSC 0,5 - Solder wire lead-free with silver and copper, Ø 0,5 mm, 250 g
86.43 EUR
The Kristall 611 solder wire is based on a halogen-activated ''no-clean'' flux. It was developed for high demands in conventional soldering and for soldering SMDs in industrial production, as well as for repair and post-soldering.The wire flux Kristall 611 is a well activated flux based on synthetic resins and combines in an excellent way high activity and very good flow properties with small amounts of solid and electrically safe residues.
Product advantages:
- Only slightly coloured no-clean residues
- Fast soldering even on surfaces that are not optimally solderable
- Low spattering behaviour
- Mild odour
Application areas:
The Kristall 611 can be used for hand and machine soldering in the field of electrical engineering and electronics and plays its strengths where the wettability is not always optimal and it has to be done quickly.
FELDER LÖTTECHNIK FE 238552008598 - SMD soft solder paste ISO-Cream ''Clear'', 30 g, grain size 3
44.05 EUR
ISO-Cream® ''Clear'' lead-free SMD solder paste is a homogeneous, ready-to-use, low-odour mixture of metal powder, binders, solvents and flux powder. It is free of any thixotropic agents, ensuring stable viscosity. This paste has excellent wetting properties and is also great for soldering problematic surfaces such as chem. Ni/Au, chem. AG or OSP.- Colourless flux powder residues
- Low flux spreading
- First-class wetting on all known surfaces
- Barely any escape for larger cleaning intervals of the reflow oven
- Genuine no-clean quality
- Excellent print quality
- Long service life of at least 72 hours
- Perfect soldering results with different soldering profiles
- Insensitive to environmental influences
- Retains viscosity even during pressure breaks
Product features
Alloy: Sn96.5Ag3.0Cu0.5
Lead-free: Yes
FELDER LÖTTECHNIK FE 2385520085984 - SMD soft solder paste ISO-Cream ''Clear'', 30 g, grain size 4
44.05 EUR
ISO-Cream® ''Clear'' lead-free SMD solder paste is a homogeneous, ready-to-use, low-odour mixture of metal powder, binders, solvents and flux powder. It is free of any thixotropic agents, ensuring stable viscosity. This paste has excellent wetting properties and is also great for soldering problematic surfaces such as chem. Ni/Au, chem. AG or OSP.- Colourless flux powder residues
- Low flux spreading
- First-class wetting on all known surfaces
- Barely any escape for larger cleaning intervals of the reflow oven
- Genuine no-clean quality
- Excellent print quality
- Long service life of at least 72 hours
- Perfect soldering results with different soldering profiles
- Insensitive to environmental influences
- Retains viscosity even during pressure breaks
Product features
Alloy: Sn96.5Ag3.0Cu0.5
Lead-free: Yes
SMD solder paste ISO-Cream ''Clear'',
Sn96.5Ag3.0Cu0.5, DIN EN ISO 9453,
Flux DIN EN 29454, 1.2.3.C (REL0),
Metal content: 85%, grain size 4,
CFH 52377 - Bar solder SZ 377 lead-free 2 bars zinc sheet
25.44 EUR
- For soldering refined zinc and alloyed zinc in the roofing sector, Sn91Zn9, EN ISO 9453
- Use only in combination with zinc sheet soldering fluid CFH no. 52372
- 2 bars, 295 mm each
STANNOL STA HS10F TC 0,5 - Solder wire HS10 FAIR lead-free with copper, Ø 0,5 mm, 250 g
61.62 EUR
Solder wire HS10 FAIR - Fair, ecological, reliable!The soldering wire HS10 is a product that has been tried and tested for many years and has been developed for high quality requirements in industrial production as well as for fast repair and re-soldering. It is characterised in an outstanding way by high activity, i.e. fast propagation and electrically safe residues.
Product advantages:
- Halogen-activated natural resin (colophony)
- Fast spread
- Solid, non-sticky residues that may remain on the soldering joint
- No-Clean
Application areas:
The solder wire HS10 can be used for hand and robot soldering in the field of electrical engineering and electronics.
STANNOL STA 611 TC 0,7 - Solder wire lead-free with copper, Ø 0,7 mm, 250 g
44.05 EUR
The Kristall 611 solder wire is based on a halogen-activated ''no-clean'' flux. It was developed for high demands in conventional soldering and for soldering SMDs in industrial production, as well as for repair and post-soldering.The wire flux Kristall 611 is a well activated flux based on synthetic resins and combines in an excellent way high activity and very good flow properties with small amounts of solid and electrically safe residues.
Product advantages:
- Only slightly coloured no-clean residues
- Fast soldering even on surfaces that are not optimally solderable
- Low spattering behaviour
- Mild odour
Application areas:
The Kristall 611 can be used for hand and machine soldering in the field of electrical engineering and electronics and plays its strengths where the wettability is not always optimal and it has to be done quickly.
STANNOL STA 611 TC 0,5 - Solder wire lead-free with copper, Ø 0,5 mm, 250 g
50.25 EUR
The Kristall 611 solder wire is based on a halogen-activated ''no-clean'' flux. It was developed for high demands in conventional soldering and for soldering SMDs in industrial production, as well as for repair and post-soldering.The wire flux Kristall 611 is a well activated flux based on synthetic resins and combines in an excellent way high activity and very good flow properties with small amounts of solid and electrically safe residues.
Product advantages:
- Only slightly coloured no-clean residues
- Fast soldering even on surfaces that are not optimally solderable
- Low spattering behaviour
- Mild odour
Application areas:
The Kristall 611 can be used for hand and machine soldering in the field of electrical engineering and electronics and plays its strengths where the wettability is not always optimal and it has to be done quickly.
EDSYN SSAC2010 - Solder wire, lead-free, 0.2 mm, Sn 96.5 Ag Cu0.5 10 gr
44.05 EUR
The solution for your future soldering needs: lead-freeSSAC 2010 lead-free solder wire with three metals and silver content for Fine Pitch components
Flux-powder as per F-SW 32
-> Barely visible, clear flux-powder residue
Not necessary to clean the PCB boards -> NO - CLEAN
Eutectic solder, i.e. the solder is either in a solid or liquid state, there is no paste-like transition state
-> No bonded solder joints
-> Particularly important for the smallest solder joints with minimum solder volume
Ideal for use in SMD technology, in particular Fine Pitch components and micro components
Sn 96.5 Ag Cu0.5
Silver-containing alloy makes soldering of SMDs and precision connections easier
Little smoke is produced
Lower soldering repair temperature compared to conventional lead-free soldering
-> Easier to use for users
Melting point:
• Solid: 217°C
• Liquid: 217°C
STANNOL STA ECOLOY - Solder bar, lead-free Sn99.3 Cu0.7, triangular
45.08 EUR
Stannol solder bar Ecoloy lead-free Sn99.3 Cu0.7Triangular-rod (approx. 300 - 330 g)
The solder bar made of Sn99.3 Cu0.7 alloy is characterised by the following points:
Pure tin-copper alloy
Lower costs (because no silver included)
Patent-free alloy -> no licence fees
Good wetting properties
Eutectic alloy with a defined melting point (227°C)
Length approx. 44 cm
Height/width of approx. 1 cm (triangular form)
STANNOL STA ECOLOY AG - Solder bar, lead free Sn95.5 Ag3.8 Cu0.7 triangular
98.83 EUR
Stannol solder bar Ecoloy lead-free Sn95.5 Ag3.8 Cu0.7Triangular-rod (approx. 330 g)
Stannol Ecoloy TSC solder bar lead free
The solder bar made of Sn95.5 Ag3.8 Cu0.7 alloy is characterised by the following points:
The lowest melting point of high tin, lead-free alloys (217°C)
Improved wetting properties
Eutectic alloy with a defined melting point (217°C)
Length approx. 44 cm
Height/width of approx. 1 cm (triangular form)
STANNOL STA HS10F TC 1,0 - Solder wire HS10 FAIR lead-free with copper, Ø 1,0 mm, 250 g
51.28 EUR
Solder wire HS10 FAIR - Fair, ecological, reliable!The soldering wire HS10 is a product that has been tried and tested for many years and has been developed for high quality requirements in industrial production as well as for fast repair and re-soldering. It is characterised in an outstanding way by high activity, i.e. fast propagation and electrically safe residues.
Product advantages:
- Halogen-activated natural resin (colophony)
- Fast spread
- Solid, non-sticky residues that may remain on the soldering joint
- No-Clean
Application areas:
The solder wire HS10 can be used for hand and robot soldering in the field of electrical engineering and electronics.
WELLER WSW T0051386499 - Lead-free solder, WSW SAC M1, Ø 0.5 mm, 500 g
150.51 EUR
WSW SAC M1 solder wire, Ø 0.5 mm, 500 gAlloy: Sn3.0Ag0.5Cu
Temperature range: 217 - 221°C
Flux: J-STD 004 - M1
WELLER WSW T0051388299 - Lead-free solder, WSW SAC M1, Ø 0.5 mm, 100 g
53.26 EUR
WSW SAC M1 solder wire, Ø 0.5 mm, 100 gAlloy: Sn3.0Ag0.5Cu
Temperature range: 217 - 221°C
Flux: J-STD 004 - M1
STANNOL STA HS10 TSC 0,5 - HS10 lead-free solder containing silver and copper, Ø 0.5 mm, 25
95.73 EUR
Stannol HS10 Ecoloy 2510 TSC Sn95 Ag4 Cu1, lead-freeHS10 electronic solder wire is a proven product of our research - it has been developed for particularly high quality requirements in industrial production applications and for fast repair and resoldering work.
HS10 solder wire boasts excellent characteristics for high levels of activity, i.e. fast spreading and electrically safe residues. The HS10 wire flux consists of halogen-activated natural resin (colophony), meaning that it conforms to IEC 61190-1-3 type ROM1.
The activated natural colophony used offers the following advantages:
- Solid residues (no sticking, chemical/physical safety)
- Special activator (higher spreading speed and fast soldering leading to reduced cycle times)
HS10 solder wire can be used for manual and robot soldering within the electrical engineering and electronics sectors.
The flux residues can be left on the solder joints. If cleaning is required for visual or technical reasons, the Stannol Flux-Ex 200B or Stannol Flux-Ex 500 cleaning agents offer effective cleaning.
FELDER LÖTTECHNIK LZ F5 BF 0,75250 - Lead-free solder with silver and copper, Ø 0.75 mm, 250 g
53.35 EUR
Solder wire, ''Ultra-Clear'' ISO coreAlloy:
Sn96.5/Ag3.0/Cu0.5
Flux content: 2.2%
Lead-free: Yes
Melting point: 217 - 219°C
FELDER LÖTTECHNIK LZ F5 BF 1,0 250 - Lead-free solder with silver and copper, Ø 1.0 mm, 250 g
51.28 EUR
Solder wire, ''Ultra-Clear'' ISO coreAlloy:
Sn96.5/Ag3.0/Cu0.5
Flux content: 2.2%
Lead-free: Yes
Melting point: 217 - 219°C
FELDER LÖTTECHNIK LZ F1 BF 0,75 25 - Soldering wire, lead free, 250-g reel, 0.75 mm, Sn95.5
129.84 EUR
Lead-free solder wire with silver and copper content on a roll.Flux-filled, halogen-free activated soft solder wire. Flux according to DIN EN 29454.1, 1.1.3.B or DIN EN 61190-1-3, ROL0.
No-clean standard solder wire for manual soldering in electronics, standard flux content 3.5%.
- Ø: 0.75 mm
- Quantity: approx. 250 g
- Composition: Sn95.5 Ag3.8 Cu0.7 F-SW32 (1.1.3.B)
- Halogen-free
- Low smoke emission
- Use in SMD technology
The NO-CLEAN SOLUTION with continuous flux cores - no more cleaning of solder joints after soldering.
lead-free with silver and copper content/halogen-free
FELDER LÖTTECHNIK LZ F1 BF 0,5 250 - Soldering wire, lead free, 250-g reel, 0.5 mm, Sn95.5
130.87 EUR
Environmentally friendly, lead-free solder wire with silver and copper content on a roll.Flux-filled, halogen-free activated soft solder wire. Flux according to DIN EN 29454.1, 1.1.3.B or DIN EN 61190-1-3, ROL0.
No-clean standard solder wire for manual soldering in electronics, standard flux content 3.5%.
- Ø: 0.5 mm
- Quantity: approx. 250 g
- Structure: Sn95.5 Ag3.8 Cu0.7 F-SW32 (1.1.3.B)
- Halogen-free
- Low smoke emission
- Use in SMD technology
The NO-CLEAN SOLUTION with continuous flux cores - no more cleaning of solder joints after soldering.
lead-free with silver and copper content/halogen-free