METYLAN MAL05 - Wallpaper remover Metylan Aktiv, 500 ml

18.74 EUR
Detailed sheet with complete information, compare prices and find the features for PRODUCTNAME, at the price of PRICE CURRENCY; classified in the category CATEGORY NAME; this product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
Highly effective due to active surfactants. Odourless. For wallpapers and woodchip.
Properties:
Intended use:
Processing instructions:
Special instructions:
EAN: 4015000073479
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Highly effective due to active surfactants. Odourless. For wallpapers and woodchip.
Properties:
- Very fast soaking (saves working time)
- Highly effective due to special active surfactant combination (much faster than dishwashing detergent)
- High-yielding concentrate
- Without foaming
- Approximately 5-10 minutes
- Neutral odour
- Solvent-free
- Range up to 400 m² per litre
Intended use:
- For effective removal of wallpaper and woodchip
- Wash-off of distemper paints
Processing instructions:
- The solution prepared according to the instructions for use is applied liberally with a ceiling brush, twice if necessary
- Roughen water-permeable and multi-layer glued/overpainted wallpapers with coarse sandpaper, needle roller or similar before soaking
- We do not recommend spraying or fogging
- Application temperature: Substrate and ambient temperature not below 10°C
Special instructions:
- Clean work equipment with water immediately after application
- Avoid contact with eyes, if necessary (e.g. when working overhead) wear protective goggles
- Consumption approx. 100 ml/m²
EAN: 4015000073479
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products

Wallpaper paste made of high-quality modified starch ether, methyl cellulose and synthetic resin. High-yield - lasts for up to 5 rolls or 22 m².
Properties:
- 2 in 1: integrated primer. Formula regulates the absorbency of the substrate for optimal hold
- Suitable for wall application and back pasting
- Excellent initial adhesion and final strength
- Very high adhesion - no open seams
- Quickly ready for use, long corrigibility
- High moisture resistance for all rooms
Store product tightly closed, cool and dry


WEICON Label Remover easily and safely removes adhesive labels, price tags (e.g. incorrect labels), address and product stickers, identifi cation labels, and label residues. It also removes adhesive residues from foil labels such as vignettes on car windshields. Label Remover is suitable for many surfaces such as glass, metal, wood, foil and plastic.



Quickly and reliably loosens stuck and rusted screws, bolts, sliders etc. Rapid cooling down to -40°C destroys rust and dirt structures. Hairline cracks appear. The capillary-active substances penetrate quickly and deeply — stuck parts can be easily loosened. Rust flash is acid and silicon-free.
Can size: 500 ml






It effectively dissolves common outdoor stains such as tar, tree sap and insect residue. Its gel formula allows it to be sprayed on like a liquid, but solidifies on contact and sticks to all surfaces.
Application
1. rinse surfaces with water beforehand to remove coarse soiling
2. spray at a distance of 15-20 cm from the surface and leave to act for one minute
3. wipe with a soft cloth or sponge and let dry
4. remove streaks with clean cloth
Notes
• avoid hot surfaces, otherwise the product will be difficult to remove
• on waxed surfaces, such as paintwork, wax must be reapplied after use
• wash hands after use

This universal cleaner for the interior cleans without leaving a greasy residue and freshens the air at the same time. The universal cleaner is suitable for almost all surfaces such as plastic, vinyl, leather, wood, carpet and fabric not only removes stains and residues of any kind but also provides a fresh scent for up to 30 days.

Apply before using marten repellent products! If you do not remove the scent marks, the marten will feel provoked and will defend its territory.
Not an engine cleaner. Specifically for scent marks.
Application: Apply only when the engine/engine compartment is cold!
• Spray the engine compartment including the inside of the hood and the mudguard with scent mark remover.
• Leave for approx. 2 - 3 minutes and rinse with water. Do not rinse with a pressure washer.
• Please take extra care with sensitive electronic components!
Scent mark remover alone does not protect against marten damage. For protection against rodent bites, please use marten repellers or our Z100 marten repellent spray!
Technical data
Safety instructions R10 flammable. Keep container tightly closed. Keep away from sources of ignition — do not smoke! Avoid contact with skin. In the event of contact with eyes, rinse immediately with plenty of water and consult a doctor. If swallowed, seek medical advice immediately and show this packaging or label. Use only in well-ventilated areas. Contains (R)-(+)-limonene. May cause allergic reactions.
Disposal instructions Empty packaging can be recycled.
Ingredients < 5 % anionic surfactants, fragrances, (R)-(+)-limonene, citral, benzisothiazolinone, methylisothiazolinone, dyes
Contents 500 ml

