REICHELT IE: Upss
The Best
APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.
Input:
- Nominal Input Voltage: 230V
- Input Connections: IEC 60320 C20
Output:
- Output power capacity: 1.2kWatts / 2.2kVA
- Output Connections: (6) IEC 60320 C13 (Battery Backup)
- Nominal Output Voltage: 230V
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Ideal Power Protection for the following environments and devices:
- Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
- Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
- Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera
Top Pick
APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.
Input:
- Nominal Input Voltage: 230V
- Input Connections: IEC 60320 C14
Output:
- Output power capacity: 410 Watts / 750VA
- Output Connections: (4) IEC 60320 C13 (Battery Backup)
- Nominal Output Voltage: 230V
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Ideal Power Protection for the following environments and devices:
- Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
- Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
- Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera
Excellent
Original APC RBC (TM) are tested for compatibility and certified to restore the original specifications of the UPS power.
The replacement battery (Replacement Battery Cartridges- RBCs) of APC are safe and reliable, and save time by a minimum number of connections. The RBCs APC can be exchanged during operation, so that no network downtime for installation are required ..
Tested and certified for the restoration of the power of your APC UPS. Meets UPS safety regulations (UL, VDE, CSA) and is backed by a lifetime equipment protection warranty - equipped Lifetime Equipment Protection Policy (if applicable).
Replacement for:
SUA750R2IX38, SUA750RM2U, SUA750RMI2U
Recommended
Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Output
- Output power capacity: 900Watts / 1.5 kVA
- Max Configurable Power (Watts): 900Watts / 1.5 kVA
- Nominal Output Voltage: 230V
- Output Voltage Distortion: Less than 5%
- Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
- Other Output Voltages: 220, 240
- Topology: Line Interactive
- Waveform type: Sine wave
- Output Connections: 8x IEC 320 C13 (Battery Backup), 2x IEC Jumpers (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Input voltage range for main operations: 180 - 287V
- Input voltage adjustable range for mains operation: 170 - 300V
- Other Input Voltages: 220, 240
Batteries & Runtime
- Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time: 3hour(s)
- Replacement Battery: RBC6
- Expected Battery Life (years): 3 - 5
- RBC Quantity: 1
Communications & Management
- Interface Port(s): USB
- Control panel: Multi-function LCD status and control console
- Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
Regulatory:
C-Tick, CE, Querschnitt, GOST, UL 1778, VDE
Featured
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 600Watts / 1.0kVA
- Max Configurable Power (Watts): 600Watts / 1.0kVA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power...
Alternative
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 300Watts / 500VA
- Max Configurable Power (Watts): 300Watts / 500VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet...
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 375Watts / 650VA
- Max Configurable Power (Watts): 375Watts / 650VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a...
Original APC RBC (TM) are tested for compatibility and certified to restore the original specifications of the UPS power.
The replacement battery (Replacement Battery Cartridges- RBCs) of APC are safe and reliable, and save time by a minimum number of connections. The RBCs APC can be exchanged during operation, so that no network downtime for installation are required ..
Tested and certified for the restoration of the power of your APC UPS. Meets UPS safety regulations (UL, VDE, CSA) and is backed by a lifetime equipment protection warranty - equipped Lifetime Equipment Protection Policy (if applicable).
Replacement for:
SU2200RMXL3U, SU2200RMXLI3U, SU3000RMXL3U, SU3000RMXLI3U, SU48R3XLBP, SU48RMXLBP3U
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 2x Earthed socket outlet
- 230 V AC
- 900 VA / 480 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C13
- 220 - 240 V AC
Output:
- 6x IEC C14
- 230 V AC
- 1600 VA / 900 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
Original APC RBC (TM) are tested for compatibility and certified to restore the original specifications of the UPS power.
The replacement battery (Replacement Battery Cartridges- RBCs) of APC are safe and reliable, and save time by a minimum number of connections. The RBCs APC can be exchanged during operation, so that no network downtime for installation are required ..
Tested and certified for the restoration of the power of your APC UPS. Meets UPS safety regulations (UL, VDE, CSA) and is backed by a lifetime equipment protection warranty - equipped Lifetime Equipment Protection Policy (if applicable).
Replacement for:
- BR1100CI
- BR1100CI-IN
- BR1100CI-RS
- BX1100CI-AR
- BX1100CI-CN
- BX1100CI-LM
- BX1100CI-MS
- BX1100CI-RS
- BX1100U-LM
- BX1400U-MS
- SMC2000I2U-BR
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C20
- 220 - 240 V AC
Output:
- 6x IEC C14
- 230 V AC
- 2200 VA / 1200 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
Original APC RBC(TM) are tested and certified for compatibility to restore original UPS performance specifications.
APC's Replacement Battery Cartridges (RBCs) are safe, reliable and save time with a minimal number of connections.
APC's RBCs can be hot-swapped, eliminating the need for power downtime for installation.
Tested and certified to restore the performance of your APC UPS.
Complies with UPS safety regulations (UL, VDE, CSA).
Replacement for:
- SMT1000I
- SU700X167
- SUA1000
- SUA1000I
- BP1000I
- SMC1500I
- SMT1000
- SMT1000C
- SMT1000I-6W
- SMT1000IC
Original APC RBC(TM) are tested and certified for compatibility to restore original UPS performance specifications.
APC's Replacement Battery Cartridges (RBCs) are safe, reliable and save time with a minimal number of connections.
APC's RBCs can be hot-swapped, eliminating the need for power downtime for installation.
Tested and certified to restore the performance of your APC UPS.
Complies with UPS safety regulations (UL, VDE, CSA).
Replacement for:
- BH500INET
- BK325-FR
- BK325-GR
- BK325-IT
- BK325-UK
- BK350EI
- BK500EI
- BK500-RS
- BR500I
- SC420
- SC420I
- BE550-GR
Original APC RBC (TM) are tested for compatibility and certified to restore the original specifications of the UPS power.
The replacement battery (Replacement Battery Cartridges- RBCs) of APC are safe and reliable, and save time by a minimum number of connections. The RBCs APC can be exchanged during operation, so that no network downtime for installation are required ..
Tested and certified for the restoration of the power of your APC UPS. Meets UPS safety regulations (UL, VDE, CSA) and is backed by a lifetime equipment protection warranty - equipped Lifetime Equipment Protection Policy (if applicable).
Replacement for:
SUA1000RM2U, SUA1000RMI2U
Powerful UPS with premium protection features for computers and electronic systems.
Output
- Output power capacity: 540Watt / 900VA
- Maximum configurable power (watts): 540Watt / 900VA
- Nominal output voltage: 230V
- Output frequency (mains synchronized): 50/60 Hz +/-1 Hz
- Output frequency (non-synchronized): 50/60 Hz +/-1 Hz
- Topology: Line-Interactive
- Output connections: (2) protective contact CEE 7 + (3) protective contact CEE 7 (mains failure protection)
- Transfer Time: 8ms typical : 10 ms maximum
Input
- Nominal input voltage: 230V
- Input frequency: 50/60 Hz +/-3 Hz (automatic scanning)
- Input connection type: earthing contact CEE 7/7P
- Cable length: 1.52Meter
- Input voltage range for mains operation: 176 - 294V
- Input voltage adjustment range for main operations: 156 - 300V
Automatic Voltage Regulation (AVR)
Automatically increases the low voltage gradually and decreases the high voltage to levels suitable for your equipment.
Surge Protectors
Protects connected equipment from overvoltages on data lines.
LC display
The alphanumeric display shows system parameters as well as warnings.
USB interface
Allows the UPS to be managed via the USB port.
Intelligent battery management
An intelligent precision charging system optimizes battery performance, life and reliability.
Adjustable voltage sensitivity
Switch between predefined thresholds (high, medium or low tolerance) - depending on available power quality - to increase battery life and protect sensitive electronics.
Adjustable voltage switching points
Adjust the minimum and maximum voltage values (voltage range size) at which the UPS switches to battery power to increase battery life and protect sensitive electronics.
Green operating mode
Patent-pending operating mode that shuts down unused electrical components when power conditions are good, allowing very high operating efficiency without sacrificing safety.
Sockets for connecting plug-in power supplies.
Protect equipment with input transformers without obscuring other outlets.
Automatic voltage regulation (AVR) with boost and trim function.
Increases UPS availability by correcting over- and undervoltages without using the battery.
Supports cold start
Allows temporary battery operation when mains power fails.
Battery failure notification
Analyses for early detection of battery faults enable timely preventive maintenance
Automatic self-test
Periodic battery self-tests for timely replacement of depleted...
Battery Backup & Surge Protector for Electronics and Computers
Output
- Output power capacity: 400Watts / 650VA
- Max Configurable Power (Watts): 400Watts / 650VA
- Nominal Output Voltage: 230V
- Output Frequency (sync to mains): 47 - 63 Hz
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Standby
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (3) IEC 320 C13 (Battery Backup) + (2) IEC Jumpers + (1) IEC 320 C13
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 47 - 63 Hz, 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Input voltage range for main operations: 180 - 266V
- Input voltage adjustable range for mains operation: 160 - 286V
- Number of Power Cords: 2
- Maximum Input Current: 7.0A
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
LED status display
Quickly understand unit and power status with visual indicators.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Approvals:
A-tick, C-tick, CE, GOST, NEMKO
Direct service!
• Free customer hotline: 0800 101 00 67
Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Output
- Output power capacity: 700Watts / 1.0 kVA
- Max Configurable Power (Watts): 700Watts / 1.0 kVA
- Nominal Output Voltage: 230V
- Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
- Output Voltage Distortion: Less than 5%
- Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
- Other Output Voltages: 220, 240
- Topology: Line Interactive
- Waveform type: Sine wave
- Output Connections: 8x IEC 320 C13 (Battery Backup), 2x IEC Jumpers (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Input voltage range for main operations: 160 - 286V
- Input voltage adjustable range for mains operation: 151 - 302V
- Other Input Voltages: 220, 240
Batteries & Runtime
- Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time: 3hour(s)
- Replacement Battery: RBC6
- Expected Battery Life (years): 3 - 5
- RBC Quantity: 1
Communications & Management
- Interface Port(s): SmartSlot , USB
- Control panel: Multi-function LCD status and control console
- Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
- Emergency Power Off (EPO): Optional
- Available SmartSlot™ Interface Quantity: 1
Regulatory:
CE, Querschnitt, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, UL 1778, VDE
Upss REICHELT IE Best Products
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C14
- 220 - 240 V AC
Output:
- 6x IEC C13
- 230 V AC
- 1200 VA / 650 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
High Performance Computer and Electronics UPS for Premium Power Protection
Output
- Output power capacity: 540Watts / 900VA
- Max Configurable Power (Watts): 540Watts / 900VA
- Nominal Output Voltage: 230V
- Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 10ms typical : 12ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Input voltage range for main operations: 176 - 294V
- Maximum Input Current: 10.0A
Batteries & Runtime
- Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time: 12hour(s)
- Expected Battery Life (years): 3 - 5
- RBC Quantity: 1
- Battery Volt-Amp-Hour Capacity: 128
Communications & Management
- Interface Port(s): USB
- Control panel: Multi-function LCD status and control console
- Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
- Data Line Protection: Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector)
- Filtering: Full time multi-pole noise filtering :10% of IEEE surge let-through : zero clamping response time: instantaneous
Includes:
- USB cable
- User Manual
102.87 EUR APC EASY UPS BV 650VA, AVR, Schutzkonakt Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 375Watts / 650VA
- Max Configurable Power (Watts): 375Watts / 650VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of...
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C14
- 220 - 240 V AC
Output:
- 4x IEC C13
- 230 V AC
- 900 VA / 480 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
Original APC RBC (TM) are tested for compatibility and certified to restore the original specifications of the UPS power.
The replacement battery (Replacement Battery Cartridges- RBCs) of APC are safe and reliable, and save time by a minimum number of connections. The RBCs APC can be exchanged during operation, so that no network downtime for installation are required ..
Tested and certified for the restoration of the power of your APC UPS. Meets UPS safety regulations (UL, VDE, CSA) and is backed by a lifetime equipment protection warranty - equipped Lifetime Equipment Protection Policy (if applicable).
Replacement for:
SMT750I, SUA750
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 2x Earthed socket outlet
- 230 V AC
- 700 VA / 360 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Output
- Output power capacity: 2.7kWatts / 3.0kVA
- Max Configurable Power (Watts): 2.7kWatts / 3.0kVA
- Nominal Output Voltage: 230V
- Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
- Output Voltage Distortion: Less than 5%
- Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
- Other Output Voltages: 220, 240
- Topology: Line Interactive
- Waveform type: Sine wave
- Output Connections: (1) IEC 320 C19 (Battery Backup), (2) IEC Jumpers (Battery Backup), (8) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections: IEC-320 C20, Schutzkontakt CEE 7 / EU1-16P, British BS1363A
- Input voltage range for main operations: 160 - 286V
- Input voltage adjustable range for mains operation: 151 - 302V
- Number of Power Cords: 1
- Other Input Voltages: 220, 240
Batteries & Runtime
- Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time: 3hour(s)
- Replacement Battery: RBC55
- Expected Battery Life (years): 3 - 5
- RBC Quantity: 1
- Extendable Run Time: 1
Communications & Management
- Interface Port(s): SmartSlot, USB
- Control panel: Multi-function LCD status and control console
- Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
- Emergency Power Off (EPO): Yes
- Available SmartSlot™ Interface Quantity: 1
Cold-start capable
Provides temporary battery power when the utility power is out.
Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency
Reduces utility costs, generates less heat.
Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Pure sine wave output on battery<...
Original APC RBC(TM) are tested and certified for compatibility to restore original UPS performance specifications.
APC's Replacement Battery Cartridges (RBCs) are safe, reliable and save time with a minimal number of connections.
APC's RBCs can be hot-swapped, eliminating the need for power downtime for installation.
Tested and certified to restore the performance of your APC UPS.
Complies with UPS safety regulations (UL, VDE, CSA).
Replacement for:
- BR1500I
- SC1000I
- BR24BPBLK
High Performance Computer and Electronics UPS for Premium Power Protection
Output
- Output power capacity: 720Watts / 1.2kVA
- Max Configurable Power (Watts): 720Watts / 1.2kVA
- Nominal Output Voltage: 230V
- Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveformtype: Stepped approximation to a sinewave
- Output Connections: (3) Schutzkontakt CEE 7 + (3) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 10ms typical : 12ms maximum
- Bypass: Built-in Bypass
Input
- Nominal Input Voltage: 230V
- Input frequency: 50 Hz +/- 1 Hz, 60 Hz +/- 1 Hz
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Input voltage range for main operations: 176 - 294V
- Input voltage adjustable range for mains operation: 156 - 300V
- Maximum Input Current: 10.0A
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Customizable voltage sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
Customizable voltage-transfer points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Cold-start capable
Provides temporary battery power when the utility power is out.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and...
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 4x Earthed socket outlet
- 230 V AC
- 1200 VA / 650 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C14
- 220 - 240 V AC
Output:
- 4x IEC C13
- 230 V AC
- 700 VA / 360 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Output
- Output power capacity: 1.0 KWatts / 1.5 kVA
- Max Configurable Power (Watts): 1.0 KWatts / 1.5 kVA
- Nominal Output Voltage: 230V
- Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
- Output Voltage Distortion: Less than 5%
- Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
- Other Output Voltages: 220, 240
- Topology: Line Interactive
- Waveform type: Sine wave
- Output Connections: 8x IEC 320 C13 (Battery Backup), 2x IEC Jumpers (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length:1.83meters
- Input voltage range for main operations: 160 - 286V
- Input voltage adjustable range for mains operation: 151 - 302V
- Number of Power Cords: 1
- Other Input Voltages: 220, 240
Batteries & Runtime
- Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time: 3hour(s)
- Replacement Battery: RBC7
- Expected Battery Life (years): 3 - 5
- RBC Quantity: 1
Regulatory
CE, Querschnitt, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, UL 1778, VDE
Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Output
- Output power capacity: 2.7kWatts / 3.0kVA
- Max Configurable Power (Watts): 2.7kWatts / 3.0kVA
- Nominal Output Voltage: 230V
- Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
- Output Voltage Distortion: Less than 5%
- Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
- Other Output Voltages: 220, 240
- Topology: Line Interactive
- Waveform type: Sine wave
- Output Connections: (3) IEC Jumpers (Battery Backup), (8) IEC 320 C13 (Battery Backup), (1) IEC 320 C19 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections: British BS1363A, IEC-320 C20, Schutzkontakt CEE 7/EU1-16P
- Cord Length: 2meters
- Input voltage range for main operations: 160 - 286V
- Input voltage adjustable range for mains operation: 151 - 302V
- Number of Power Cords: 1
- Other Input Voltages: 220, 240
Batteries & Runtime
- Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time: 3hour(s)
- Replacement Battery: RBC43
- Expected Battery Life (years): 3 - 5
- RBC Quantity: 1
Communications & Management
- Interface Port(s): RJ-45 Serial, SmartSlot, USB
- Control panel: Multi-function LCD status and control console
- Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
- Available SmartSlot™ Interface Quantity: 1
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Boost and Trim Automatic Voltage Regulation (AVR)
Eliminates...
Best Value Battery Backup & Protection for Business Computers
Output
- Output power capacity: 210Watts / 350VA
- Max Configurable Power (Watts): 210Watts / 350VA
- Nominal Output Voltage: 230V
- Output Frequency (sync to mains): 47 - 63 Hz
- Topology: Standby
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (3) NEMA 5-15R (selector_surgetitle) + (3) NEMA 5-15R (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
- Input voltage range for main operations: 196 - 280V
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
LED status display
Quickly understand unit and power status with visual indicators.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Approvals
C-tick, CE, EN 50091-1, EN 50091-2, GOST, VDE
Direct service!
• Free customer hotline: 0800 101 00 67
This APC Back-UPS Pro offers first-class power protection for powerful games consoles and PCs, routers/modems and gaming accessories.
The 2200VA/1320W tower UPS has a total of 6 outlets, 3 with battery backup and surge protection and 3 with surge protection only.
It has a surge protection of 1080 joules.
It has automatic voltage regulation that corrects voltage dips and surges to the correct level. Included is PowerChute Serial Shutdown, an easy-to-use software for safely shutting down the system with power and energy management functions.
This UPS has 2 USB ports (type A + C) for smart charging of personal devices.
Output
- Max. configurable power in W: 1320 W
- Output frequency: 50/60 Hz +/-3 Hz mains synchronization
- UPS type: Line Interactive
- Wave type: Sine wave
- Runtime at full load: 00:30:00
- Runtime at half load: 00:04:29
- Max. configurable power in VA: 2200 VA
- Running time at 700 W: 00:04:00
- Switching time: 8 ms typical, 10 ms max.
Input
- Network frequency: 50/60 Hz +/-3 Hz
- Plug standard: earthing contact
- Input voltage limits: 168 - 302 V
- Max. Input current: 12 A
- Max. Switching current: 15 A
- Input harmonic distortion: Less than 3 % at full load
- Input protection type: Circuit breaker
Sustainability
With the Green PremiumTM label, Schneider Electric is committed to delivering products with world-class environmental performance. Green Premium promises compliance with current regulations, transparency on environmental impact, recyclability and products with a low carbon footprint.
132.95 EUR APC EASY UPS BV 1000VA, AVR, Schutzkontakt Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 600Watts / 1.0kVA
- Max Configurable Power (Watts): 600Watts / 1.0kVA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet...
Universal sensor for monitoring temperature and humidity in data center or network rooms.
- Operating temperature range: 0 - 55 °C
- Operating relative humidity: 0 - 95
Sensor connector type RJ-45
Automatically detected by compatible NetBotz appliances and can be easily extended up to 30 m with standard Cat.5 / Cat.6 cable.
Unique identifiers
Each sensor can be customized with a unique name and location.
Original APC RBC(TM) are tested and certified for compatibility to restore original UPS performance specifications.
APC's Replacement Battery Cartridges (RBCs) are safe, reliable and save time with a minimal number of connections.
APC's RBCs can be hot-swapped, eliminating the need for power downtime for installation.
Tested and certified to restore the performance of your APC UPS.
Complies with UPS safety regulations (UL, VDE, CSA).
Replacement for:
- SURT1000RMXLI
- SURT1000XLI
- SURT2000RMXLI
- SURT2000XLI
- SURT48XLBP
- IAX1SURT2KIP10
High Performance Computer and Electronics UPS for Premium Power Protection
Output
- Output power capacity: 960Watts / 1.6kVA
- Max Configurable Power (Watts): 960Watts / 1.6kVA
- Nominal Output Voltage: 230V
- Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Output Connections: (6) IEC 320 C13 (Battery Backup), (2) IEC 320 C13
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Input voltage range for main operations: 176 - 294V
- Maximum Input Current: 10.0A
Batteries & Runtime
- Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time: 16hour(s)
- Expected Battery Life (years): 3 - 5
- RBC Quantity: 1
- Battery Volt-Amp-Hour Capacity: 180
Communications & Management
- Interface Port(s): USB
- Control panel: Multi-function LCD status and control console
- Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
- Surge energy rating: 509Joules
- Data Line Protection: RJ45 10/100/1000 Base-T Ethernet protection
- Filtering: Full time multi-pole noise filtering :10% of IEEE surge let-through : zero clamping response time: instantaneous
Includes:
- USB cable
- User Manual
Original APC RBC(TM) are tested and certified for compatibility to restore original UPS performance specifications.
APC's Replacement Battery Cartridges (RBCs) are safe, reliable and save time with a minimal number of connections.
APC's RBCs can be hot-swapped, eliminating the need for power downtime for installation.
Tested and certified to restore the performance of your APC UPS. Complies with UPS safety regulations (UL, VDE, CSA).
Replacement for:
- BC500-RS
- BC650-RS
- BE550G
- BE550G-CN
- BE550G-CP
- BE550G-FR
- BE550G-GR
- BE550G-IT
- BE550G-LM
- BE550G-RS
- BE550G-SP
- BE550G-TW
- BE550G-UK
- BE550R
- BE550R-CN
- BE600D-LM
- BN600G
- BN600MC
- BR550G-AR
- BR550G-CN
- BR550GI
- BR650CI
- BR650CI-RS
- BR650MI
- BVX700LI
- BVX700LI-GR
- BVX700LUI
- BVX700LUI-GR
- BX575U-LM
- BX600C-IN
- BX600L-LM
- BX625CI-MS
- BX650CI-AR
- BX650CI-CN
- BX650CI-MS
- BX650CI-RS
- BX650LI
- BX650LI-GR
- BX650LI-MS
- BX650U-LM
- BX700U-FR
- BX700U-GR
- BX700U-MS
- BX700UI
- BX800LI
- BX800LI-MS
Genuine APC RBC(TM) are tested and certified for compatibility to restore original UPS performance specifications.
APC's Replacement Battery Cartridges (RBCs) are safe, reliable and save time with a minimal number of connections.
APC's RBCs can be hot-swapped, eliminating the need for power downtime for installation.
Tested and certified to restore the performance of your APC UPS. Complies with UPS safety regulations (UL, VDE, CSA).
Compatible UPS models:
- BE325
- BE325-CN
- BE325-FR
- BE325-GR
- BE325-IT
- BE325-LM
- BE325-UK
- BE325R
- BE325R-CN
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 4x Earthed socket outlet
- 230 V AC
- 2200 VA / 1200 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
