Review Apc bkrs900 sch power saving back ups pro 900va protective c

APC BKRS1200 SCH - Power-saving Back-UPS Pro, 1200 VA protective contact plug If se 531.71 EUR Power-Saving Back-UPS Pro 1200, 230V, Schutzkontakt
High Performance Computer and Electronics UPS for Premium Power Protection

Output

Output power capacity: 720Watts / 1.2kVA
Max Configurable Power (Watts): 720Watts / 1.2kVA
Nominal Output Voltage: 230V
Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
Output Frequency (not synced): 50/60 Hz +/-1 Hz
Topology: Line Interactive
Waveformtype: Stepped approximation to a sinewave
Output Connections: (3) Schutzkontakt CEE 7 + (3) Schutzkontakt CEE 7 (Battery Backup)
Transfer Time: 10ms typical : 12ms maximum
Bypass: Built-in Bypass

Input

Nominal Input Voltage: 230V
Input frequency: 50 Hz +/- 1 Hz, 60 Hz +/- 1 Hz
Input Connections: Schutzkontakt CEE 7/7P
Cord Length: 5ft (1.52meters)
Input voltage range for main operations: 176 - 294V
Input voltage adjustable range for mains operation: 156 - 300V
Maximum Input Current: 10.0A

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Customizable voltage sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.

Customizable voltage-transfer points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Cold-start capable
Provides temporary battery power when the utility power is out.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and...

SEE OFFER SEE OFFER ebay

APC BR900MI - Back-UPS Pro, 900VA, LCD, 230 V 304.38 EUR Back UPS Pro BR 900VA, 6 Outlets, AVR, LCD Interface
High Performance Computer and Electronics UPS for Premium Power Protection

Output

Output power capacity: 540Watts / 900VA
Max Configurable Power (Watts): 540Watts / 900VA
Nominal Output Voltage: 230V
Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
Topology: Line Interactive
Waveform type: Stepped approximation to a sinewave
Output Connections: (6) IEC 320 C13 (Battery Backup)
Transfer Time: 10ms typical : 12ms maximum

Input

Nominal Input Voltage: 230V
Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections: IEC-320 C14
Input voltage range for main operations: 176 - 294V
Maximum Input Current: 10.0A

Batteries & Runtime

Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time: 12hour(s)
Expected Battery Life (years): 3 - 5
RBC Quantity: 1
Battery Volt-Amp-Hour Capacity: 128

Communications & Management

Interface Port(s): USB
Control panel: Multi-function LCD status and control console
Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Data Line Protection: Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector)
Filtering: Full time multi-pole noise filtering :10% of IEEE surge let-through : zero clamping response time: instantaneous

Includes:

USB cable
User Manual

SEE OFFER SEE OFFER ebay

APC BX1600MI - Back UPS, 1600VA / 900 W 241.83 EUR APC Back-UPS 1600VA, 230V, AVR, IEC Sockets

APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.

Input:

Nominal Input Voltage: 230V
Input Connections: IEC 60320 C14

Output:

Output power capacity: 900 Watts / 1.6kVA
Output Connections: (6) IEC 60320 C13 (Battery Backup)
Nominal Output Voltage: 230V

Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Ideal Power Protection for the following environments and devices:

Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera

SEE OFFER SEE OFFER ebay

APC BVX1600LI-GR - Easy UPS, 1600VA / 900 W 211.23 EUR APC Easy UPS BVX 1600VA, 230V, AVR, Earthed Sockets

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.

Input:

1x Power cord
220 - 240 V AC

Output:

4x Earthed socket outlet
230 V AC
1600 VA / 900 W

Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.

Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

SEE OFFER SEE OFFER ebay

APC BVX900LI-GR - Easy UPS, 900VA / 480 W 140.17 EUR APC Easy UPS BVX 900VA, 230V, AVR, Earthed Sockets

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.

Input:

1x Power cord
220 - 240 V AC

Output:

2x Earthed socket outlet
230 V AC
900 VA / 480 W

Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.

Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

SEE OFFER SEE OFFER ebay

APC BVX1600LI - Easy UPS, 1600VA / 900 W 230.3 EUR APC Easy UPS BVX 1600VA, 230V, AVR, IEC Sockets

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.

Input:

1x IEC C13
220 - 240 V AC

Output:

6x IEC C14
230 V AC
1600 VA / 900 W

Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.

Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

SEE OFFER SEE OFFER ebay

APC BVX900LI - Easy UPS, 900VA / 480 W 153.62 EUR APC Easy UPS BVX 900VA, 230V, AVR, IEC Sockets

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.

Input:

1x IEC C14
220 - 240 V AC

Output:

4x IEC C13
230 V AC
900 VA / 480 W

Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.

Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

SEE OFFER SEE OFFER ebay

APC BGM2200-GR - Back-UPS Pro Gaming, 2200 VA / 1320 W 488.19 EUR APC Back-UPS Pro, 2200VA/1320W, Tower, 230V, 4x protective contact and 2x IEC C13 outlets, RGB lighting, pure sine wave, Arctic (white)

This APC Back-UPS Pro offers first-class power protection for powerful games consoles and PCs, routers/modems and gaming accessories.
The 2200VA/1320W tower UPS has a total of 6 outlets, 3 with battery backup and surge protection and 3 with surge protection only.
It has a surge protection of 1080 joules.
It has automatic voltage regulation that corrects voltage dips and surges to the correct level. Included is PowerChute Serial Shutdown, an easy-to-use software for safely shutting down the system with power and energy management functions.
This UPS has 2 USB ports (type A + C) for smart charging of personal devices.

Output

Max. configurable power in W: 1320 W
Output frequency: 50/60 Hz +/-3 Hz mains synchronization
UPS type: Line Interactive
Wave type: Sine wave
Runtime at full load: 00:30:00
Runtime at half load: 00:04:29
Max. configurable power in VA: 2200 VA
Running time at 700 W: 00:04:00
Switching time: 8 ms typical, 10 ms max.

Input

Network frequency: 50/60 Hz +/-3 Hz
Plug standard: earthing contact
Input voltage limits: 168 - 302 V
Max. Input current: 12 A
Max. Switching current: 15 A
Input harmonic distortion: Less than 3 % at full load
Input protection type: Circuit breaker

Sustainability
With the Green PremiumTM label, Schneider Electric is committed to delivering products with world-class environmental performance. Green Premium promises compliance with current regulations, transparency on environmental impact, recyclability and products with a low carbon footprint.

SEE OFFER SEE OFFER ebay

APC BR1600MI - Back-UPS Pro, 1600VA, LCD, 230 V 562.71 EUR Back UPS Pro BR 1600VA, 8 Outlets, AVR, LCD Interface

High Performance Computer and Electronics UPS for Premium Power Protection

Output

Output power capacity: 960Watts / 1.6kVA
Max Configurable Power (Watts): 960Watts / 1.6kVA
Nominal Output Voltage: 230V
Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
Topology: Line Interactive
Output Connections: (6) IEC 320 C13 (Battery Backup), (2) IEC 320 C13

Input

Nominal Input Voltage: 230V
Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections: IEC-320 C14
Input voltage range for main operations: 176 - 294V
Maximum Input Current: 10.0A

Batteries & Runtime

Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time: 16hour(s)
Expected Battery Life (years): 3 - 5
RBC Quantity: 1
Battery Volt-Amp-Hour Capacity: 180

Communications & Management

Interface Port(s): USB
Control panel: Multi-function LCD status and control console
Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Surge energy rating: 509Joules
Data Line Protection: RJ45 10/100/1000 Base-T Ethernet protection
Filtering: Full time multi-pole noise filtering :10% of IEEE surge let-through : zero clamping response time: instantaneous

Includes:

USB cable
User Manual

SEE OFFER SEE OFFER ebay

APC BR1600SI - Back UPS Pro BR, 1600VA, LCD, 230V 697.08 EUR Back UPS Pro BR 1600VA, Sinewave,8 Outlets, AVR, LCD interface
High Performance Computer and Electronics UPS for Premium Power Protection

Technical Specifications

Output

Output power capacity: 960Watts / 1.6kVA
Max Configurable Power (Watts): 960Watts / 1.6kVA
Nominal Output Voltage: 230V
Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
Topology: Line Interactive
Output Connections: (6) IEC 320 C13 (Battery Backup), (2) IEC 320 C13 (Surge Protection)

Input

Nominal Input Voltage: 230V
Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections: IEC-320 C14
Input voltage range for main operations: 176 - 294V
Maximum Input Current: 10.0A

Batteries & Runtime

Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time: 16hour(s)
Expected Battery Life (years): 3 - 5
RBC Quantity: 1
Battery Volt-Amp-Hour Capacity: 260

Communications & Management

Interface Port(s): USB
Control panel: Multi-function LCD status and control console
Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Audible alarms
Provides notification of changing utility power and UPS power conditions

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Cold-start capable
Provides temporary battery power when the utility power is out.

Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

LCD graphics display
Text and mimic diagrams that display modes of operation,...

SEE OFFER SEE OFFER ebay

APC BR650MI - Back-UPS Pro, 650VA, LCD, 230 V 237.29 EUR Back UPS Pro BR 650VA, 6 Outlets, AVR, LCD Interface

High Performance Computer and Electronics UPS for Premium Power Protection

Output

Output power capacity: 390Watts / 650VA
Max Configurable Power (Watts): 390Watts / 650VA
Nominal Output Voltage: 230V
Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
Topology: Line Interactive
Waveform type: Stepped approximation to a sinewave
Output Connections: (6) IEC 320 C13 (Battery Backup)
Transfer Time: 10ms typical : 12ms maximum

Input

Nominal Input Voltage: 230V
Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections: IEC-320 C14
Input voltage range for main operations: 176 - 294V
Maximum Input Current: 10.0A

Batteries & Runtime

Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time: 12hour(s)
Expected Battery Life (years): 3 - 5
RBC Quantity: 1
Battery Volt-Amp-Hour Capacity: 75

Communications & Management

Interface Port(s): USB
Control panel: Multi-function LCD status and control console
Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Includes:

USB cable
User Manual

SEE OFFER SEE OFFER ebay

APC BX1200MI - Back UPS, 1200VA / 650 W 185.65 EUR APC Back-UPS 1200VA, 230V, AVR, IEC Sockets

APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.

Input:

Nominal Input Voltage: 230V
Input Connections: IEC 60320 C14

Output:

Output power capacity: 650 Watts / 1.2kVA
Output Connections: (6) IEC 60320 C13 (Battery Backup)
Nominal Output Voltage: 230V

Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Ideal Power Protection for the following environments and devices:

Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera

SEE OFFER SEE OFFER ebay

APC BX2200MI - Back UPS, 2200VA / 1200 W 319.81 EUR APC Back-UPS 2200VA, 230V, AVR, IEC Sockets

APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.

Input:

Nominal Input Voltage: 230V
Input Connections: IEC 60320 C20

Output:

Output power capacity: 1.2kWatts / 2.2kVA
Output Connections: (6) IEC 60320 C13 (Battery Backup)
Nominal Output Voltage: 230V

Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Ideal Power Protection for the following environments and devices:

Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera

SEE OFFER SEE OFFER ebay

APC BX950MI - Back UPS, 950VA / 520 W 150.47 EUR APC Back-UPS 950VA, 230V, AVR, IEC Sockets

APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.

Input:

Nominal Input Voltage: 230V
Input Connections: IEC 60320 C14

Output:

Output power capacity: 520 Watts / 950VA
Output Connections: (6) IEC 60320 C13 (Battery Backup)
Nominal Output Voltage: 230V

Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Ideal Power Protection for the following environments and devices:

Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera

SEE OFFER SEE OFFER ebay

APC BX750MI - Back UPS, 750VA / 410 W 148.96 EUR APC Back-UPS 750VA, 230V, AVR, IEC Sockets

APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.

Input:

Nominal Input Voltage: 230V
Input Connections: IEC 60320 C14

Output:

Output power capacity: 410 Watts / 750VA
Output Connections: (4) IEC 60320 C13 (Battery Backup)
Nominal Output Voltage: 230V

Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Ideal Power Protection for the following environments and devices:

Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera

SEE OFFER SEE OFFER ebay

APC BK350EI - APC Back-UPS CS, 210 watts/350 VA If service is required, please 180.45 EUR APC Back-UPS 350VA X545 230V
Best Value Battery Backup & Protection for Business Computers

Output

Output power capacity: 210Watts / 350VA
Max Configurable Power (Watts): 210Watts / 350VA
Nominal Output Voltage: 230V
Output Frequency (sync to mains): 47 - 63 Hz
Topology: Standby
Waveform type: Stepped approximation to a sinewave
Output Connections: (3) NEMA 5-15R (selector_surgetitle) + (3) NEMA 5-15R (Battery Backup)
Transfer Time: 6ms typical : 10ms maximum

Input

Nominal Input Voltage: 230V
Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input voltage range for main operations: 196 - 280V

Serial connectivity
Provides management of the UPS via a serial port.

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

LED status display
Quickly understand unit and power status with visual indicators.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Approvals
C-tick, CE, EN 50091-1, EN 50091-2, GOST, VDE

Direct service!
• Free customer hotline: 0800 101 00 67

SEE OFFER SEE OFFER ebay

APC BK500EI - APC Back-UPS CS, 300 watts/500 VA If service is required, please 206.23 EUR APC Back-UPS 500, 230V
Battery Backup & Surge Protector for Electronics and Computers

Output

Output power capacity: 300Watts / 500VA
Max Configurable Power (Watts): 300Watts / 500VA
Nominal Output Voltage: 230V
Output Frequency (sync to mains): 47 - 63 Hz
Output Frequency (not synced): 50/60 Hz +/-1 Hz
Topology: Standby
Waveform type: Stepped approximation to a sinewave
Output Connections: (1) IEC 320 C13 + (2) IEC Jumpers + (3) IEC 320 C13 (Battery Backup)
Transfer Time: 6ms typical : 10ms maximum

Input

Nominal Input Voltage: 230V
Input frequency: 47 - 63 Hz, 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections: IEC-320-C14 inlet
Input voltage range for main operations: 180 - 266V
Input voltage adjustable range for mains operation: 160 - 300V
Number of Power Cords: 2
Maximum Input Current: 7.0A

Serial connectivity
Provides management of the UPS via a serial port.

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

LED status display
Quickly understand unit and power status with visual indicators.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Approvals
C-tick, CE, EN 50091-1, EN 50091-2, GOST, VDE

Direct service!
• Free customer hotline: 0800 101 00 67

SEE OFFER SEE OFFER ebay

APC BK650EI - APC Back-UPS CS, 400 watts/650 VA If service is required, please 229.02 EUR APC Back-UPS 650, 230V
Battery Backup & Surge Protector for Electronics and Computers

Output

Output power capacity: 400Watts / 650VA
Max Configurable Power (Watts): 400Watts / 650VA
Nominal Output Voltage: 230V
Output Frequency (sync to mains): 47 - 63 Hz
Output Frequency (not synced): 50/60 Hz +/-1 Hz
Topology: Standby
Waveform type: Stepped approximation to a sinewave
Output Connections: (3) IEC 320 C13 (Battery Backup) + (2) IEC Jumpers + (1) IEC 320 C13
Transfer Time: 6ms typical : 10ms maximum

Input

Nominal Input Voltage: 230V
Input frequency: 47 - 63 Hz, 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections: IEC-320 C14
Input voltage range for main operations: 180 - 266V
Input voltage adjustable range for mains operation: 160 - 286V
Number of Power Cords: 2
Maximum Input Current: 7.0A

Serial connectivity
Provides management of the UPS via a serial port.

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

LED status display
Quickly understand unit and power status with visual indicators.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Approvals:
A-tick, C-tick, CE, GOST, NEMKO

Direct service!
• Free customer hotline: 0800 101 00 67

SEE OFFER SEE OFFER ebay

APC BE650G2-GR - Back UPS, 650VA, 230V, USB 144.31 EUR APC Back-UPS 650VA, 230V, 1 USB charging port
Battery Backup & Surge Protector for Electronics and Computers

Output

Output power capacity: 400Watts / 650VA
Max Configurable Power (Watts): 400Watts / 650VA
Nominal Output Voltage: 230V
Efficiency at Full Load: 80.0 %
Output Frequency (sync to mains): 47 - 63 Hz
Output Frequency (not synced): 50/60 Hz +/-1 Hz
Other Output Voltages: 220
Topology: Standby
Waveform type: Stepped approximation to a sinewave
Output Connections: (2) F CEE 7 (Surge Protection), (6) F CEE 7 (Battery Backup)
Transfer Time: 6ms typical : 10ms maximum

Input

Nominal Input Voltage: 230V
Input frequency: 47 - 63 Hz
Input Connections: F CEE 7/7P
Cord Length: 1.83meters
Input voltage range for main operations: 180 - 266V
Efficiency at Full Load: 80.0 %
Maximum Input Current: 6.0A

Batteries & Runtime

Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Expected Battery Life (years): 2 - 5
Battery Volt-Amp-Hour Capacity: 75

Communications & Management

Interface Port(s): USB
Control panel: LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators, LED status display with On Line : On Battery : Replace Battery and Overload indicators
Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Surge energy rating: 310Joules
Data Line Protection: Analog phone line for phone/fax/modem/DSL (RJ-45 connector), Network line - 10/100 Base-T Ethernet (RJ-45 connector)

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.

Cold-start capable
Provides temporary battery power when the utility power is out.

Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Hot-swappable batteries
Ensures...

SEE OFFER SEE OFFER ebay

APC SMC1000I-2UC - Smart-UPS C, 1000VA, LCD RM 2U, 230V 948.15 EUR APC Smart-UPS C 1000VA LCD RM 2U 230V with SmartConnect

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

Output

Output power capacity: 600Watts / 1.0 kVA
Max Configurable Power (Watts): 600Watts / 1.0 kVA
Nominal Output Voltage: 230V
Output Voltage Distortion: Less than 5%
Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
Other Output Voltages: 220, 240
Topology: Line Interactive
Waveform type: Sine wave
Output Connections: 4x IEC 320 C13 (Battery Backup), 2x IEC Jumpers (Battery Backup)
Transfer Time: 6ms typical : 10ms maximum

Input

Nominal Input Voltage: 230V
Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections: IEC-320 C14
Input voltage range for main operations: 180 - 287V
Input voltage adjustable range for mains operation: 170 - 300V
Number of Power Cords: 1
Other Input Voltages: 220, 240

Batteries & Runtime

Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time: 3hour(s)
Replacement Battery: APCRBC124
Expected Battery Life (years): 4 - 6
RBC Quantity: 1

Communications & Management

Interface Port(s): RJ-45 Serial , USB
Control panel: Multi-function LCD status and control console
Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays

Regulatory:
C-Tick, CE, GOST, UL 1778, VDE

SEE OFFER SEE OFFER ebay

APC SMC1500IC - Smart-UPS C 1500VA LCD 230V 860.34 EUR APC Smart-UPS C 1500VA LCD 230V with SmartConnect

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

Output

Output power capacity: 900Watts / 1.5 kVA
Max Configurable Power (Watts): 900Watts / 1.5 kVA
Nominal Output Voltage: 230V
Output Voltage Distortion: Less than 5%
Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
Other Output Voltages: 220, 240
Topology: Line Interactive
Waveform type: Sine wave
Output Connections: 8x IEC 320 C13 (Battery Backup), 2x IEC Jumpers (Battery Backup)
Transfer Time: 6ms typical : 10ms maximum

Input

Nominal Input Voltage: 230V
Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections: IEC-320 C14
Input voltage range for main operations: 180 - 287V
Input voltage adjustable range for mains operation: 170 - 300V
Other Input Voltages: 220, 240

Batteries & Runtime

Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time: 3hour(s)
Replacement Battery: RBC6
Expected Battery Life (years): 3 - 5
RBC Quantity: 1

Communications & Management

Interface Port(s): USB
Control panel: Multi-function LCD status and control console
Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays

Regulatory:
C-Tick, CE, Querschnitt, GOST, UL 1778, VDE

SEE OFFER SEE OFFER ebay

APC SMT1500RMI2C - Smart-UPS 1500VA LCD RM 2U 230V 1514.5 EUR APC Smart-UPS 1500VA LCD RM 2U 230V with SmartConnect

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

Output

Output power capacity: 1.0 KWatts / 1.5 kVA
Max Configurable Power (Watts): 1.0 KWatts / 1.5 kVA
Nominal Output Voltage: 230V
Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion: Less than 5%
Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
Other Output Voltages: 220, 240
Topology: Line Interactive
Waveform type: Sine wave
Output Connections: 2x IEC Jumpers (Battery Backup), 4x IEC 320 C13 (Battery Backup)
Transfer Time: 6ms typical : 10ms maximum

Input

Nominal Input Voltage: 230V
Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections: IEC-320 C14
Input voltage range for main operations: 160 - 286V
Input voltage adjustable range for mains operation: 151 - 302V
Other Input Voltages: 220, 240

Batteries & Runtime

Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time: 3hour(s)
Expected Battery Life (years): 4 - 6
RBC Quantity: 1

Communications & Management

Interface Port(s): RJ-45 Serial , SmartSlot , USB
Control panel: Multi-function LCD status and control console
Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO): Optional
Available SmartSlot™ Interface Quantity: 1

Regulatory:
CE, Querschnitt, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, TÜV, VDE

SEE OFFER SEE OFFER ebay

ONLINE KG10A8SCH - Power strip for UPS, 8-way protective contact 133.93 EUR Industrial 48.3cm (19'') power strip for UPS systems

For connecting loads with earthing contact plugs to the UPS, for example to supply plug-in power supply units, telephone systems, network equipment, etc. It simplifies cabling in the 48.3cm (19'') cabinet and ensures structured installation. Particularly robust design in anodized, torsion-resistant aluminum profile.

Manufacturer-independent use, e.g. also with APC, MGE, Powerware, etc.
48.3cm (19'') design (482.6 mm) at 1 U (height unit)
Practical stainless steel mounting bracket for mounting in 4 positions, each 90°.

Technical data

19'' design (482.6mm) at 1 height unit (HE)
Max. Current carrying capacity: 10A
Input: 10A cold appliance plug (IEC320 C14)
Output: 8-fold protective contact socket
Supply cable: 2m H05VV-F 3G1,50mm² with fuse
Practical stainless steel bracket for mounting in 4 positions, each 90°
Color: light gray, RAL 7035

SEE OFFER SEE OFFER ebay

FREI APC RBC 6 - RBC 6 replacement battery 120.5 EUR APC Compatible Replacement Battery

APC Back-UPS Pro

1000VA

APC Smart-UPS

1000VA
1000VA USB

APC Smart-UPS RM 1000VA Only for:

SU1000RMNET
SU1000RM
SU1000RMI

APC Smart-UPS RM 1500VA Ruggedized Version Only for:

SU1500RMX155

APC Smart-UPS RM 2000VA Ruggedized Version Only for:

SU2000R3X155

APC Smart-UPS

1000VA

SEE OFFER SEE OFFER ebay

FREI APC RBC 7 - RBC 7 replacement battery 175.94 EUR Compatible replacement battery for
APC Back-UPS Pro 1400 VA
APC Smart-UPS 700XL , 1400 VA , 1000 VA XL , 700 VA XL , 1500 VA , 750 VA XL USB & serial
APC Smart-UPS v/s 1400 VA

SEE OFFER SEE OFFER ebay

FREI APC RBC 4 - RBC 4 replacement battery 56.41 EUR APC Compatible Replacement Battery

Suitable for:
APC Back-UPS:

650VA

APC Back-UPS Pro:

650
650VA

APC Smart-UPS

620
620VA

APC Smart-UPS

650VA

SEE OFFER SEE OFFER ebay

EATON ELP650IEC - UPS, 650 VA / 400 W, USB PORT 211.49 EUR The Eaton Ellipse PRO 650 VA is a line-interactive UPS, specifically designed for protecting workstations with demanding applications. The Ellipse PRO is equipped with an LCD display for real-time status display and measured values. It also has EcoControl power outlets that enable energy savings of up to 15 percent, and Advanced surge reduction (ASR) surge protection according to the requirements of the IEC 616431-1 standard.

General Data:

650 VA / 400 W.
165 - 285 V.
5 min battery life at 70% load
USB port
Eaton UPS companion software on CD ROM
Line-Interactive Technology
Replaceable, sealed batteries
3 cold appliance sockets with surge protection and backup
1 cold appliance sockets with surge protection only
Automatic Battery Test
Resettable Fuse

Advanced protection for:

Workstations
Network Devices
Peripherals

Standards:

IEC 61643-1
IEC/EN 62040-1
IEC/EN 62040-2
CB Report
CE mark

On the LCD screen of the Eaton Ellipse PRO are not
Only system status and measured values clearly displayed, also
The configuration of the desired UPS settings is performed
relieved by him.

The EcoControl function automatically deactivates the peripheral devices,
When the master device is turned off, do so
Energy savings of up to 15% can be achieved.

By Automatic voltage Regulation (AVR) voltage control
If voltage fluctuations are corrected immediately,
Therefore, the work can be continued without battery operation,
When voltage drops or overvoltages occur.

The Ellipse PRO has a high-performance overvoltage protection
According to IEC 61643-1. It also protects data transmissions
Via Ethernet, Internet and telephone connections.

Further technical details can be found in the data sheet.

SEE OFFER SEE OFFER ebay

EATON ELP1200DIN - UPS, 1200 VA / 750 W, USB PORT 355.99 EUR The Eaton Ellipse PRO 1200 VA is a line-interactive UPS, specifically designed for protecting workstations with demanding applications. The Ellipse PRO is equipped with an LCD display for real-time status display and measured values. It also has EcoControl power outlets that enable energy savings of up to 20 percent, and Advanced surge reduction (ASR) surge protection according to the requirements of the IEC 616431-1 standard.

General Data:

1200 VA / 750 W.
165 - 285 V.
5 min battery life at 70% load
USB port
Eaton UPS companion software on CD ROM
Line-Interactive Technology
Replaceable, sealed batteries
4 outlets with surge protection and backup
4 outlets with surge protection only
Automatic Battery Test
Resettable Fuse

Advanced protection for:

Workstations
Network Devices
Peripherals

Standards:

IEC 61643-1
IEC/EN 62040-1
IEC/EN 62040-2
CB Report
CE mark

On the LCD screen of the Eaton Ellipse PRO are not
Only system status and measured values clearly displayed, also
The configuration of the desired UPS settings is performed
relieved by him.

The EcoControl function automatically deactivates the peripheral devices,
When the master device is turned off, do so
Energy savings of up to 20% can be achieved.

By Automatic voltage Regulation (AVR) voltage control
If voltage fluctuations are corrected immediately,
Therefore, the work can be continued without battery operation,
When voltage drops or overvoltages occur.

The Ellipse PRO has a high-performance overvoltage protection
According to IEC 61643-1. It also protects data transmissions
Via Ethernet, Internet and telephone connections.

Further technical details can be found in the data sheet.

SEE OFFER SEE OFFER ebay

EATON ELP1600DIN - UPS, 1600 VA / 1000 W, USB PORT 472.84 EUR The Eaton Ellipse PRO 1600 VA is a line-interactive UPS, specifically designed for protecting workstations with demanding applications. The Ellipse PRO is equipped with an LCD display for real-time status display and measured values. It also has EcoControl power outlets that enable energy savings of up to 20 percent, and Advanced surge reduction (ASR) surge protection according to the requirements of the IEC 616431-1 standard.

General Data:

1600 VA / 1000 W.
165 - 285 V.
5 min battery life at 70% load
USB port
Eaton UPS companion software on CD ROM
Line-Interactive Technology
Replaceable, sealed batteries
4 outlets with surge protection and backup
4 outlets with surge protection only
Automatic Battery Test
Resettable Fuse

Advanced protection for:

Workstations
Network Devices
Peripherals

Standards:

IEC 61643-1
IEC/EN 62040-1
IEC/EN 62040-2
CB Report
CE mark

On the LCD screen of the Eaton Ellipse PRO are not
Only system status and measured values clearly displayed, also
The configuration of the desired UPS settings is performed
relieved by him.

The EcoControl function automatically deactivates the peripheral devices,
When the master device is turned off, do so
Energy savings of up to 20% can be achieved.

By Automatic voltage Regulation (AVR) voltage control
If voltage fluctuations are corrected immediately,
Therefore, the work can be continued without battery operation,
When voltage drops or overvoltages occur.

The Ellipse PRO has a high-performance overvoltage protection
According to IEC 61643-1. It also protects data transmissions
Via Ethernet, Internet and telephone connections.

Further technical details can be found in the data sheet.

SEE OFFER SEE OFFER ebay

EATON ELP850DIN - UPS, 850 VA / 510 W, USB PORT 302.41 EUR The Eaton Ellipse PRO 850 VA is a line-interactive UPS, specifically designed for protecting workstations with demanding applications. The Ellipse PRO is equipped with an LCD display for real-time status display and measured values. It also has EcoControl power outlets that enable energy savings of up to 15 percent, and Advanced surge reduction (ASR) surge protection according to the requirements of the IEC 616431-1 standard.

General Data:

850 VA / 510 W.
165 - 285 V.
5 min battery life at 70% load
USB port
Eaton UPS companion software on CD ROM
Line-Interactive Technology
Replaceable, sealed batteries
3 outlets with surge protection and backup
1 outlets with surge protection only
Automatic Battery Test
Resettable Fuse

Advanced protection for:

Workstations
Network Devices
Peripherals

Standards:

IEC 61643-1
IEC/EN 62040-1
IEC/EN 62040-2
CB Report
CE mark

On the LCD screen of the Eaton Ellipse PRO are not
Only system status and measured values clearly displayed, also
The configuration of the desired UPS settings is performed
relieved by him.

The EcoControl function automatically deactivates the peripheral devices,
When the master device is turned off, do so
Energy savings of up to 15% can be achieved.

By Automatic voltage Regulation (AVR) voltage control
If voltage fluctuations are corrected immediately,
Therefore, the work can be continued without battery operation,
When voltage drops or overvoltages occur.

The Ellipse PRO has a high-performance overvoltage protection
According to IEC 61643-1. It also protects data transmissions
Via Ethernet, Internet and telephone connections.

Further technical details can be found in the data sheet.

SEE OFFER SEE OFFER ebay

EATON ELP650DIN - UPS, 650 VA / 400 W, USB PORT 215.38 EUR The Eaton Ellipse PRO 650 VA is a line-interactive UPS, specifically designed for protecting workstations with demanding applications. The Ellipse PRO is equipped with an LCD display for real-time status display and measured values. It also has EcoControl power outlets that enable energy savings of up to 15 percent, and Advanced surge reduction (ASR) surge protection according to the requirements of the IEC 616431-1 standard.

General Data:

650 VA / 400 W.
165 - 285 V.
5 min battery life at 70% load
USB port
Eaton UPS companion software on CD ROM
Line-Interactive Technology
Replaceable, sealed batteries
3 outlets with surge protection and backup
1 outlets with surge protection only
Automatic Battery Test
Resettable Fuse

Advanced protection for:

Workstations
Network Devices
Peripherals

Standards:

IEC 61643-1
IEC/EN 62040-1
IEC/EN 62040-2
CB Report
CE mark

On the LCD screen of the Eaton Ellipse PRO are not
Only system status and measured values clearly displayed, also
The configuration of the desired UPS settings is performed
relieved by him.

The EcoControl function automatically deactivates the peripheral devices,
When the master device is turned off, do so
Energy savings of up to 15% can be achieved.

By Automatic voltage Regulation (AVR) voltage control
If voltage fluctuations are corrected immediately,
Therefore, the work can be continued without battery operation,
When voltage drops or overvoltages occur.

The Ellipse PRO has a high-performance overvoltage protection
According to IEC 61643-1. It also protects data transmissions
Via Ethernet, Internet and telephone connections.

Further technical details can be found in the data sheet.

SEE OFFER SEE OFFER ebay

RUKO 101626PRO - 3-piece UC step drill set, FLOWSTEP, HSS RUnaTEC 147.41 EUR Size 0/9, 1, 2

Significantly longer tool life - up to 6x more holes are possible
Time savings of up to 75% when drilling
Extremely fast and energy-saving drilling
Drilling is easy and quiet, the drill bit does not jam in the material
Ideal for use in hand-held (cordless) electric tools

Item number
101626PRO
Net weight
0,600 kg

SEE OFFER SEE OFFER ebay

RUKO101087PRO - 3-piece RUnaTEC HSS step drill set 202.19 EUR Set, size no. S1/M2/L3

The ULTIMATECUT Multidrill revolutionises the working process and sets new standards in processing time, saving up to 75% time. The Multidrill from RUKO achieves this through its revolutionary cutting edge geometry by combining the most diverse applications and tools, meaning fewer are tools needed, no tool changes required and also giving you ultimate flexibility.
Item number 101087PRO
Net weight: 0.458 kg

Technical data
Number of cutting edges 4
Coating RUnaTEC
Shank 3-surface shank
Cutting direction Right-handed cutting
Material HSS
Tolerance Factory standard
Tip angle 130°
Step angle 90°

Areas of application
Main application
Steel 900 N/mm²
Steel 1100 N/mm²
aluminium
Brass
Plastic
Other areas of application
Steel 1300 N/mm²
Stainless steel
Bronze
Cast iron

SEE OFFER SEE OFFER ebay

KABELMEISTER KM SK0190-S005 - Power cord, protective contact plug type E+F (90° weight), 0.5m 14.39 EUR With the C19 cold appliance connection cable from Kabelmeister®, you can quickly and easily connect a device with C20 connection to the mains via the protective contact plug. The cables are used in particular in uninterruptible power supply (UPS) systems, high-class servers and blade server chassis. For our cold appliance cables we only use high-quality H05-VV-F cable material that has been tested by the VDE. For increased durability, strain reliefs are attached to the connectors for added protection and support. By using modern production facilities, standardized processes and high-quality materials, a consistently high processing quality of the products is achieved.

Technical specification:

Connection 1: Protective contact plug type E+F (CEE 7/7, angled)
Connection 2: IEC 60320 C19 cold appliance socket (straight)
CABLE: H05-VV-F (3G)
Conductor material: Copper
Core cross-section: 1.00 mm²
Number of wires: 3
Max. Current carrying capacity: 16 A / 250 V.
Insulation material: PVC
Sheath material: PVC
Colour: Black
Length: 0.5 m / 50 cm

SEE OFFER SEE OFFER ebay

PANASONIC PA HHR-2500SCH-P - High temperature battery 20A 17.18 EUR With the HHR-250SCH, PANASONIC offers a high temperature cell that is charged up to 60°C, supplies continuous currents of 20A and maintains up to 1000 IEC cycles. A compact, weight-saving solution for the backup sector that has been dominated by lead and NiCd batteries until now.

SEE OFFER SEE OFFER ebay

KABELMEISTER KM SK0190-S050 - Power cord, protective contact plug type E+F (90° weight), 5 m. 28.14 EUR With the C19 cold appliance connection cable from Kabelmeister®, you can quickly and easily connect a device with C20 connection to the mains via the protective contact plug. The cables are used in particular in uninterruptible power supply (UPS) systems, high-class servers and blade server chassis. For our cold appliance cables we only use high-quality H05-VV-F cable material that has been tested by the VDE. For increased durability, strain reliefs are attached to the connectors for added protection and support. By using modern production facilities, standardized processes and high-quality materials, a consistently high processing quality of the products is achieved.

Technical specification:

Connection 1: Protective contact plug type E+F (CEE 7/7, angled)
Connection 2: IEC 60320 C19 cold appliance socket (straight)
CABLE: H05-VV-F (3G)
Conductor material: Copper
Core cross-section: 1.50 mm²
Number of wires: 3
Max. Current carrying capacity: 16 A / 250 V.
Insulation material: PVC
Sheath material: PVC
Colour: Black
Length: 5 m.

SEE OFFER SEE OFFER ebay

JNB 54341 - Jonsbo D32 PRO Mesh mini enclosure, mATX 82.2 EUR The Jonsbo D32 PRO Mesh combines elegant and space-saving design for mATX motherboards. Thanks to the convenient back-connect system, cable management remains clean and clear, while the back of the motherboard conceals the cables. Graphics cards up to 365 mm in length and CPU coolers up to 170 mm can easily be accommodated.

The mesh side panel ensures a discreet look, while up to six 120-mm fans or one 240-mm AiO provide optimal cooling. Three dust filters on the front, cover and base reliably protect your hardware from dust and extend its service life.

Whether it's a compact high-end PC or a mid-range build, the D32 PRO Mesh offers maximum performance in minimal space and combines functional design with ease of use - perfect for demanding builds with a clean look. The Jonsbo D32 PRO Mesh combines elegant design and space-saving design for mATX motherboards. Thanks to the convenient back-connect system, cable management remains clean and clear, while the back of the motherboard conceals the cables.

SEE OFFER SEE OFFER ebay

FLIR ONE IOS PRO - Thermal Imaging Camera for iOS devices, Flir One Pro 500.72 EUR The FLIR ONE Pro gives you the power to find invisible problems faster than ever!

Combining a higher-resolution thermal sensor able to measure temperatures up to 400 °C (752 °F)with powerful measurement tools and report generation capability, the FLIR ONE Pro will work as hard as you do. Its revolutionary VividIR™ image processing lets you see more details and provide your customers with proof that you solved their problem right the first time. The updated design includes the revolutionary OneFit™ adjustable connector to fit your phone, without taking the phone out of its compatible protective case. An improved FLIR ONE app lets you measure multiple temperatures or regions of interest at once and stream to your smartwatch for remote viewing. Whether you’re inspecting electrical panels, looking for HVAC problems, or finding water damage, the new FLIR ONE Pro is a tool no serious professional should be without.

VividIR Image Processing

See It & Solve It - Sharpest Mobile Thermal Imaging Performance Lets You Detect Problems with Precision and Accuracy, then Document Your Fix for the Customer.

Most advanced image resolution enhancement detects the thermal details you need to find problems fast
With 160 x 120 thermal resolution, FLIR ONE Pro uses FLIR’s highest resolution micro thermal camera and can measure temperatures as high as 400 °C (752 °F)
FLIR MSX® embosses visible edges from the 1440 x 1080 HD camera onto thermal imagery to create a sharper, easier to understand picture

OneFit Connector

Leave Your Case On - Adjustable Connector Means You Don’t Have to Choose Between Thermal Vision and Safeguarding Your Device when Using Compatible Protective Cases.

Adjust length of USB-C and Lightening connector up to an additional 4 mm
Reversible connectors for Android and iOS
Secure the FLIR ONE to your mobile device while keeping your phone safe

Hard-working app

Work Like a Pro - Work-Based Features Include Advanced Capabilities for More Professional Problem Solving and Functionality.

Use multiple real-time spot meters and regions of interest
Access real-time thermal tips and tricks in the FLIR ONE app followed by professional reporting through FLIR Tools
See around corners and in awkward spaces by connecting to your Apple Watch or Android smartwatch

Technical specifications:

Operating temperature: 0 °C - 35 °C, battery charging 0 °C - 30 °C
Certifications: MFi, RoHS, CE/FCC, CEC-BC, EN61233
Non-operating temperature: -20°C ... +60°C
Mechanical shock: Drop from 1,80 m
Thermal sensor: Pixel size 12 µm, 8 – 14 µm spectral range
Thermal resolution: 160 x 120
Visual...
SEE OFFER SEE OFFER ebay

FLIR ONE AND PRO - Thermal Imaging Camera for Android devices, Flir One Pro 377.72 EUR The FLIR ONE Pro gives you the power to find invisible problems faster than ever!

For Android devices with USB-C

Combining a higher-resolution thermal sensor able to measure temperatures up to 400 °C (752 °F)with powerful measurement tools and report generation capability, the FLIR ONE Pro will work as hard as you do. Its revolutionary VividIR™ image processing lets you see more details and provide your customers with proof that you solved their problem right the first time. The updated design includes the revolutionary OneFit™ adjustable connector to fit your phone, without taking the phone out of its compatible protective case. An improved FLIR ONE app lets you measure multiple temperatures or regions of interest at once and stream to your smartwatch for remote viewing. Whether you’re inspecting electrical panels, looking for HVAC problems, or finding water damage, the new FLIR ONE Pro is a tool no serious professional should be without.

VividIR Image Processing

See It & Solve It - Sharpest Mobile Thermal Imaging Performance Lets You Detect Problems with Precision and Accuracy, then Document Your Fix for the Customer.

Most advanced image resolution enhancement detects the thermal details you need to find problems fast
With 160 x 120 thermal resolution, FLIR ONE Pro uses FLIR’s highest resolution micro thermal camera and can measure temperatures as high as 400 °C (752 °F)
FLIR MSX® embosses visible edges from the 1440 x 1080 HD camera onto thermal imagery to create a sharper, easier to understand picture

OneFit Connector

Leave Your Case On - Adjustable Connector Means You Don’t Have to Choose Between Thermal Vision and Safeguarding Your Device when Using Compatible Protective Cases.

Adjust length of USB-C and Lightening connector up to an additional 4 mm
Reversible connectors for Android and iOS
Secure the FLIR ONE to your mobile device while keeping your phone safe

Hard-working app

Work Like a Pro - Work-Based Features Include Advanced Capabilities for More Professional Problem Solving and Functionality.

Use multiple real-time spot meters and regions of interest
Access real-time thermal tips and tricks in the FLIR ONE app followed by professional reporting through FLIR Tools
See around corners and in awkward spaces by connecting to your Apple Watch or Android smartwatch

Technical specifications:

Operating temperature: 0 °C - 35 °C, battery charging 0 °C - 30 °C
Certifications: RoHS, CE/FCC, CEC-BC, EN61233
Non-operating temperature: -20°C ... +60°C
Mechanical shock: Drop from 1,80 m
Thermal sensor: Pixel size 12 µm, 8 – 14 µm spectral range<...
SEE OFFER SEE OFFER ebay

APC BKRS900 SCH - Power-Saving Back-UPS Pro,900VA protective contact.

Comparison of Similar Products