APC BV1000I-GR - Easy-UPS BV UPS 1000VA / 600 W
132.95 EUR
Examine the detailed sheet with complete information, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the production is done by MANUFACTURER NAME and the sale is managed by SELLER NAME.
APC EASY UPS BV 1000VA, AVR, Schutzkontakt Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
Input
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet...
EAN: 0731304338246
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
APC EASY UPS BV 1000VA, AVR, Schutzkontakt Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 600Watts / 1.0kVA
- Max Configurable Power (Watts): 600Watts / 1.0kVA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet...
EAN: 0731304338246
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 600Watts / 1.0kVA
- Max Configurable Power (Watts): 600Watts / 1.0kVA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power...
102.87 EUR APC EASY UPS BV 650VA, AVR, Schutzkonakt Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 375Watts / 650VA
- Max Configurable Power (Watts): 375Watts / 650VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of...
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 300Watts / 500VA
- Max Configurable Power (Watts): 300Watts / 500VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet...
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 450Watts / 800VA
- Max Configurable Power (Watts): 450Watts / 800VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical / 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for...
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 375Watts / 650VA
- Max Configurable Power (Watts): 375Watts / 650VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a...
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 300Watts / 500VA
- Max Configurable Power (Watts): 300Watts / 500VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power...
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 450Watts / 800VA
- Max Configurable Power (Watts): 450Watts / 800VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power...
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 4x Earthed socket outlet
- 230 V AC
- 2200 VA / 1200 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 4x Earthed socket outlet
- 230 V AC
- 1200 VA / 650 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 2x Earthed socket outlet
- 230 V AC
- 700 VA / 360 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 2x Earthed socket outlet
- 230 V AC
- 900 VA / 480 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 4x Earthed socket outlet
- 230 V AC
- 1600 VA / 900 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
General Data:
- 1000 VA / 600 W.
- 175 - 275 V.
- 8 min battery life at 70% load
- HID-compatible USB port
- Line-Interactive Technology
- Replaceable Batteries
- 4 cold appliance sockets with surge protection and backup
- 4 cold appliance sockets with surge protection only
- Automatic Battery Test
Ideal for protecting:
- Workstations
- Business Telephony
- Network Devices
- Point-of-sale equipment
Standards:
- IEC 61643-1
- IEC/EN 62040-1
- IEC/EN 62040 -3
- CB Report
- CE mark
The Eaton 5S UPS provides effective power protection, even in high-noise electrical environments. Voltage fluctuations are automatically compensated by a voltage regulator (AVR, booster/fader) without using the batteries.
The 5S is not only a battery backup that keeps your equipment up and running even in the event of power outages, but also provides effective protection against harmful surges.
The 5S also protects your network equipment against voltage spikes coming through the back door via Ethernet, Internet or telephone lines.
Your regular battery self-test warns early if a battery replacement is necessary.
The easy-to-replace batteries help to prolong UPS life.
The 5S can be installed vertically above, on or under a table, or horizontally under a screen. Its compact, thin form factor allows it to easily integrate into space-constrained environments.
Further technical details can be found in the data sheet.
SMX Series Smart-UPS Rack/Tower 48.3cm (19''), 800W / 1000 VA
Inputs
- 1x IEC 320 C14
Outputs
- 8x IEC 320 C13
- 2x IEC jumpers
This product is part of the Smart-UPS series, an intelligent and efficient line power protection offering from entry-level to scalable runtime.
This high quality and reliable 1000 VA / 800 W line-interactive UPS offers pure sine wave and scalable runtimes for critical applications.
The convertible (rack/tower) 2U SMX UPS has the ability to integrate a network management card for network-based monitoring and PowerChute Business Edition for unattended shutdown...
Advanced power protection for servers and network equipment
- Intuitive LCD user interface
- Display of battery replacement date
- Pure sinusoidal output signal in battery mode
- Battery failure notification
- Hot-swappable batteries
- Intelligent battery management
Automatic detection of external batteries
UPS system detects the connection of external battery modules and automatically updates the autonomy time.
Supports cold start
- Allows temporary battery operation when the mains supply fails
- Energy consumption meter
- Indication of usage in kilowatt hours for energy-conscious users.
- EPO (Energy Power-Off)
The instrument can be connected to an EPO (Emergency Power Off) system so that it is automatically switched off in an emergency situation.
Green operating mode
Patent-pending operating mode that shuts down unused electrical components when power conditions are good, allowing very high operating efficiency without sacrificing safety.
High frequency design
Reduces or eliminates the need for bulky transformers, making equipment lighter and easier to handle.
High online efficiency
- Reduces power costs, generates less waste heat
- Intuitive LCD user interface
Easy-to-read interface with accurate information in multiple languages and support for on-site UPS configuration with user-friendly navigation buttons.
Group switchable outputs
Multiple output groups for separate control via the UPS system for targeted restart of unresponsive systems, sequential startup or shutdown of systems, or shutdown of non-critical loads.
External plug-and-play batteries
Ensures uninterrupted supply of clean power to connected equipment during installation of runtime extension modules.
Battery replacement date display
Dynamic display of recommended battery replacement date in month and year facilitates long-term maintenance planning.
Pure...
Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Output
- Output power capacity: 700Watts / 1.0 kVA
- Max Configurable Power (Watts): 700Watts / 1.0 kVA
- Nominal Output Voltage: 230V
- Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
- Output Voltage Distortion: Less than 5%
- Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
- Other Output Voltages: 220, 240
- Topology: Line Interactive
- Waveform type: Sine wave
- Output Connections: 8x IEC 320 C13 (Battery Backup), 2x IEC Jumpers (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Input voltage range for main operations: 160 - 286V
- Input voltage adjustable range for mains operation: 151 - 302V
- Other Input Voltages: 220, 240
Batteries & Runtime
- Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time: 3hour(s)
- Replacement Battery: RBC6
- Expected Battery Life (years): 3 - 5
- RBC Quantity: 1
Communications & Management
- Interface Port(s): SmartSlot , USB
- Control panel: Multi-function LCD status and control console
- Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
- Emergency Power Off (EPO): Optional
- Available SmartSlot™ Interface Quantity: 1
Regulatory:
CE, Querschnitt, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, UL 1778, VDE
Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Output
- Output power capacity: 600Watts / 1.0 kVA
- Max Configurable Power (Watts): 600Watts / 1.0 kVA
- Nominal Output Voltage: 230V
- Output Voltage Distortion: Less than 5%
- Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
- Other Output Voltages: 220, 240
- Topology: Line Interactive
- Waveform type: Sine wave
- Output Connections: 4x IEC 320 C13 (Battery Backup), 2x IEC Jumpers (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Input voltage range for main operations: 180 - 287V
- Input voltage adjustable range for mains operation: 170 - 300V
- Number of Power Cords: 1
- Other Input Voltages: 220, 240
Batteries & Runtime
- Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time: 3hour(s)
- Replacement Battery: APCRBC124
- Expected Battery Life (years): 4 - 6
- RBC Quantity: 1
Communications & Management
- Interface Port(s): RJ-45 Serial , USB
- Control panel: Multi-function LCD status and control console
- Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
Regulatory:
C-Tick, CE, GOST, UL 1778, VDE
- VA: 1000
- Watts: 600
- Voltage output (Vac): 230 ± 10%
- Autonomy 50% load (min): 6
- Outputs: protective contact x 8
- Energy saving technology
- Automatic voltage regulation (AVR)
- LCD status display
- Wall mounting installation
CyberPower BR1000ELCD ensures power protection for IT equipment such as computers, NAS and network devices.
Designed in line-interactive topology with automatic voltage regulation (AVR), it provides stabilized and regulated output power supply.
The patented GreenPower UPS ™ bypass design enables extremely low power consumption that reduces energy costs.
In addition, a lower operating temperature is achieved in the UPS, extending battery life.
The LCD display shows supply information as well as battery and UPS operating status.
Other features include overload protection, EMI line filter, data line protection and configurable alarms.
In addition to the UPS-protected outputs, other outputs are available as pure surge protection for pheripherals.
The integrated USB charger allows you to charge your USB devices, making it the ideal home office power provider.
Features
- Line-interactive UPS topology
- Simulated sine wave output
- USB charging port
- Phone / Fax / Modem / DSL / Network protection
- PowerPanel management software
- Energy saving technology
- Automatic Voltage Regulation (AVR)
- Overvoltage and lightning protection
- LCD status display
- Wall mounting installation
Package Contents:
- BR1000ELCD UPS
- USB cable
- Telephone cable
- Quick start guide
This APC Back-UPS Pro offers first-class power protection for powerful games consoles and PCs, routers/modems and gaming accessories.
The 2200VA/1320W tower UPS has a total of 6 outlets, 3 with battery backup and surge protection and 3 with surge protection only.
It has a surge protection of 1080 joules.
It has automatic voltage regulation that corrects voltage dips and surges to the correct level. Included is PowerChute Serial Shutdown, an easy-to-use software for safely shutting down the system with power and energy management functions.
This UPS has 2 USB ports (type A + C) for smart charging of personal devices.
Output
- Max. configurable power in W: 1320 W
- Output frequency: 50/60 Hz +/-3 Hz mains synchronization
- UPS type: Line Interactive
- Wave type: Sine wave
- Runtime at full load: 00:30:00
- Runtime at half load: 00:04:29
- Max. configurable power in VA: 2200 VA
- Running time at 700 W: 00:04:00
- Switching time: 8 ms typical, 10 ms max.
Input
- Network frequency: 50/60 Hz +/-3 Hz
- Plug standard: earthing contact
- Input voltage limits: 168 - 302 V
- Max. Input current: 12 A
- Max. Switching current: 15 A
- Input harmonic distortion: Less than 3 % at full load
- Input protection type: Circuit breaker
Sustainability
With the Green PremiumTM label, Schneider Electric is committed to delivering products with world-class environmental performance. Green Premium promises compliance with current regulations, transparency on environmental impact, recyclability and products with a low carbon footprint.
- Integrated automatic voltage regulator protects against voltage fluctuations
- Powerful microprocessor
- AC/Automatic restart
- DC voltage start
- Modem/LAN protection Provides
- HID compatible USB connection
The Conceptronic UPS provides long-lasting, reliable backup power for small and home offices. The device features straightforward installation and operation, providing a simple and safe way to protect your systems from dangerous surges and power outages. The UPS is equipped with modem/LAN protection, a powerful microprocessor and a fault indicator that warns of dangerous wiring. Thanks to its elegant, compact design, the UPSideal is suitable for the limited workspace in small and home offices.
Technical specifications
- UPS topology: Line-interactive
- Output capacity: 1 kVA
- Output power: 600 W
- Waveform: Sine
- Input operating voltage (min): 220 V
- Input operating voltage (max): 240 V
- Output operating voltage (min): 220 V
- Output operating voltage (max): 240 V
- Automatic voltage regulation: Yes
- Audible alarm modes: Alarm on battery operation, fault, low battery warning, overload alarm
- Auto restart: Yes
- Country of origin: China
Included in delivery
- Cables supplied: Output power cable, USB cable
- Quick installation guide: Yes
- Integrated automatic voltage regulator protects against voltage fluctuations
- Powerful microprocessor
- AC/Automatic restart
- DC voltage start
- Modem/LAN protection Provides
- HID compatible USB connection
The Conceptronic UPS provides long-lasting, reliable backup power for small and home offices. The device features straightforward installation and operation, providing a simple and safe way to protect your systems from dangerous surges and power outages. The UPS is equipped with modem/LAN protection, a powerful microprocessor and a fault indicator that warns of dangerous wiring. Thanks to its elegant, compact design, the UPSideal is suitable for the limited workspace in small and home offices.
Technical specifications
- UPS topology: Line-interactive
- Output capacity: 1 kVA
- Output power: 600 W
- Waveform: Sine
- Input operating voltage (min): 220 V
- Input operating voltage (max): 240 V
- Output operating voltage (min): 220 V
- Output operating voltage (max): 240 V
- Automatic voltage regulation: Yes
- Audible alarm modes: Alarm on battery operation, fault, low battery warning, overload alarm
- Auto restart: Yes
- Battery capacity: 7 Ah
- Battery voltage: 12 V
- Battery charging time (90 %): 8 h
- Form factor: Compact
- Product color: Black
- International protection rating (IP code): IP20
Scope of delivery:
- Output power cable
- USB cable
- Quick installation guide
- 1600 VA / 1000 Watt
- 8x IEC outputs: 4x overvoltage protection + battery backup, 4x overvoltage protection only
- Protection of the telephone/fax/modem line (RJ45)
- Display, USB interface, incl. USB cable
- Fan permanently active
- 36 months warranty incl. batteries*
The Eaton Ellipse PRO 650-1600VA is a line-interactive UPS, specially developed for the protection of workstations with demanding applications.
The Ellipse PRO is equipped with an LCD display for real-time status display and measured values.
It also has EcoControl sockets, which enable energy savings of up to 20 percent, as well as Advanced Surge Reduction (ASR) surge protection in accordance with the requirements of the IEC 616431-1 standard.
*Only valid in EU countries!
Energy-saving power supply protection for workstations
The LCD screen of the Eaton Ellipse PRO not only clearly displays the system status and measured values, it also makes it easier to configure the desired UPS settings.
The EcoControl function automatically deactivates the peripheral devices when the master device is switched off, thereby achieving energy savings of up to 20%.
The Automatic Voltage Regulation (AVR) function corrects voltage fluctuations immediately, so work can continue without battery operation if voltage drops or overvoltages occur.
The Ellipse PRO has high-performance overvoltage protection in accordance with IEC 61643-1.
It also protects data transmissions via Ethernet, Internet and telephone connections.
Simple integration and installation
The Ellipse PRO is optionally equipped with four (for 650/850 VA) or eight (for 1200/1600 VA) protective contact (DIN) or IEC sockets.
This makes it easy to connect standard computer configurations with peripheral devices.
Thanks to its extra-flat design, the Ellipse PRO can be easily installed in any office environment.
Possible applications include vertical installation (e.g. under the desk), horizontal installation (e.g. under the monitor), 19-inch rack mounting (optional 2U mounting kit) and wall mounting (optional mounting kit).
The Ellipse PRO is equipped with a USB port and comes complete with USB cable and the Eaton UPS Companion software, which ensures safe shutdown of the system, recording of energy consumption and easy configuration of UPS settings.
Comprehensive safety
- Three-year warranty, including on the batteries
- Unlimited warranty for the connected computer equipment (only in EU countries and Norway)
- The batteries are subjected to automatic self-tests at regular intervals, ensuring timely detection of batteries requiring replacement
- Easy-to-replace batteries help extend the life of the UPS
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C14
- 220 - 240 V AC
Output:
- 4x IEC C13
- 230 V AC
- 700 VA / 360 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C13
- 220 - 240 V AC
Output:
- 6x IEC C14
- 230 V AC
- 1600 VA / 900 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C14
- 220 - 240 V AC
Output:
- 6x IEC C13
- 230 V AC
- 1200 VA / 650 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C14
- 220 - 240 V AC
Output:
- 4x IEC C13
- 230 V AC
- 900 VA / 480 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C20
- 220 - 240 V AC
Output:
- 6x IEC C14
- 230 V AC
- 2200 VA / 1200 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.
Battery Backup & Surge Protector for Electronics and Computers
Output
- Output power capacity: 400Watts / 650VA
- Max Configurable Power (Watts): 400Watts / 650VA
- Nominal Output Voltage: 230V
- Efficiency at Full Load: 80.0 %
- Output Frequency (sync to mains): 47 - 63 Hz
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Other Output Voltages: 220
- Topology: Standby
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (2) F CEE 7 (Surge Protection), (6) F CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 47 - 63 Hz
- Input Connections: F CEE 7/7P
- Cord Length: 1.83meters
- Input voltage range for main operations: 180 - 266V
- Efficiency at Full Load: 80.0 %
- Maximum Input Current: 6.0A
Batteries & Runtime
- Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Expected Battery Life (years): 2 - 5
- Battery Volt-Amp-Hour Capacity: 75
Communications & Management
- Interface Port(s): USB
- Control panel: LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators, LED status display with On Line : On Battery : Replace Battery and Overload indicators
- Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
- Surge energy rating: 310Joules
- Data Line Protection: Analog phone line for phone/fax/modem/DSL (RJ-45 connector), Network line - 10/100 Base-T Ethernet (RJ-45 connector)
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.
Cold-start capable
Provides temporary battery power when the utility power is out.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Hot-swappable batteries
Ensures...
- Compact size
- Excellent microprocessor control ensures high reliability
- Boost and buck AVR for voltage stabilization
- Automatic restart upon AC recovery
- Provides simulated sine wave backup power to protect electrical equipment
- Off-mode charging
- Cold start function
- Generator compatible
Input
- 220 / 230 / 240 V AC
Output
- 220 / 230 / 240 V AC
- 2x grounding contact socket
- 2x IEC socket
- 1x USB
- 2x RJ45
- Compact size
- Excellent microprocessor control ensures high reliability
- Boost and buck AVR for voltage stabilization
- Automatic restart when AC is restored
- Simulated sine wave
- Off-mode charging
- Cold start function
Input
- 220 / 230 / 240 V AC
Output
- 220 / 230 / 240 V AC
- 4x protective contact
- Compact size
- Excellent microprocessor control ensures high reliability
- Boost and buck AVR for voltage stabilization
- Automatic restart when AC is restored
- Simulated sine wave
- Off-mode charging
- Cold start function
Input
- 220 / 230 / 240 V AC
Output
- 220 / 230 / 240 V AC
- 4x protective contact
The FP Line-Interactive UPS series offers stable and reliable protection with scalable run-time.
An ideal solution for PC users, small businesses and small telecom applications.
The integrated microprocessor controller guarantees high reliability.
With simulated sine wave and cold start function the FP series is an excellent choice.
Output:
- Voltage: 220V nominal
- Frequency: 50 Hz / 60 Hz ±1 Hz
- Transfer time: typically 2-6 ms
- Curve progression (Batt. mode): Simulated sine wave
- Battery type & quantity: 12V / 7 Ah x 2
- Slots: 4x earth contact socket
Input:
- Voltage range: 81-145 / 162-290 VAC
- frequency: 60 / 50 Hz (auto sensing)
Characteristics:
- Excellent microprocessor control guarantees high reliability
- Boost-Buck voltage converter for stable voltage
- Automatic restart during AC recovery
- Compact size
- Simulated sine wave
- Off-mode loading
- Cold start function
- Main input voltage: 24 V DC
- Main output voltage: 24 V DC
- Rated power in W: 240
- DIN rail mounting
The Industrial UPS 24V DC DIN Rail is part of the Easy UPS family from Schneider Electric.
This model is a 240 W UPS with DC input and DC output to support industrial equipment.
It features 0-5V signal relay contacts, support for up to 4 external batteries, LED indicators and EPO switches for better control over industrial control infrastructure.
- DC input - DC output to support industrial devices such as PLCs, HMIs and industrial PCs.
- Relay contacts for remote diagnostics with 0-5V signals
- Support external battery sets (up to 4 sets) for additional runtime
- LED indicators to check UPS status
- EPO switch for immediate shutdown in emergencies
APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.
Input:
- Nominal Input Voltage: 230V
- Input Connections: IEC 60320 C14
Output:
- Output power capacity: 520 Watts / 950VA
- Output Connections: (6) IEC 60320 C13 (Battery Backup)
- Nominal Output Voltage: 230V
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Ideal Power Protection for the following environments and devices:
- Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
- Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
- Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera
APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.
Input:
- Nominal Input Voltage: 230V
- Input Connections: IEC 60320 C20
Output:
- Output power capacity: 1.2kWatts / 2.2kVA
- Output Connections: (6) IEC 60320 C13 (Battery Backup)
- Nominal Output Voltage: 230V
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Ideal Power Protection for the following environments and devices:
- Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
- Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
- Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera
- DC input / output: Designed to support various 12V DC network applications such as modems and routers
- Lithium-ion battery: Provides significantly longer life than traditional VRLA batteries
- Long runtime: Up to 4 hours of operating time for an average router
- Compact design: Small footprint for easy installation in tight spaces
- LED indicators: Easy-to-read indicators with battery capacity information
With APC Back-UPS Connect, your network devices such as routers, smart home assistants and IP cameras stay connected and online even during power outages.
It is a compact UPS with a power of 36 W and an input / output of 12 V DC.
The lithium-ion battery provides up to 4 hours of runtime for an average router and ensures a reliable connection.
The additional DC spikes in the box ensure maximum compatibility with various brands of network devices with 12 V nominal voltage.
Sustainability
With the Green PremiumTM label, Schneider Electric is committed to delivering products with world-class environmental performance.
Green Premium promises compliance with current regulations, transparency on environmental impact, and recyclability and low carbon footprint products.
Scope of delivery:
- 1x UPS
- 1x DC adapter 1.7 to 2.5 mm
- 1x DC adapter plug 2.5 to 1.7 mm
- 1x DC adapter plug 2.1 to 2.5 mm
- 1x DC adapter plug 2.5 to 2.1 mm
- 1x instruction manual
APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.
Input:
- Nominal Input Voltage: 230V
- Input Connections: IEC 60320 C14
Output:
- Output power capacity: 410 Watts / 750VA
- Output Connections: (4) IEC 60320 C13 (Battery Backup)
- Nominal Output Voltage: 230V
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Ideal Power Protection for the following environments and devices:
- Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
- Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
- Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera
APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.
Input:
- Nominal Input Voltage: 230V
- Input Connections: IEC 60320 C14
Output:
- Output power capacity: 650 Watts / 1.2kVA
- Output Connections: (6) IEC 60320 C13 (Battery Backup)
- Nominal Output Voltage: 230V
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Ideal Power Protection for the following environments and devices:
- Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
- Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
- Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera
Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Cold-start capable
Provides temporary battery power when the utility power is out.
Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency
Reduces utility costs, generates less heat.
Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Serial connectivity
Provides management of the UPS via a serial port.
Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
LED status indicators
Quickly understand unit and power status with visual indicators.
Network manageable
Provides remote power management of the UPS over the network.
APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.
Input:
- Nominal Input Voltage: 230V
- Input Connections: IEC 60320 C14
Output:
- Output power capacity: 900 Watts / 1.6kVA
- Output Connections: (6) IEC 60320 C13 (Battery Backup)
- Nominal Output Voltage: 230V
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Ideal Power Protection for the following environments and devices:
- Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
- Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
- Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera
