REICHELT IE: Network equipment accessories
Price Comparison
The Best

- Wi-Fi 6 technology
- Next generation speeds with 1.5 Gbps
- Connect more devices
- More reliable network coverage
- Longer battery life
- Easy to set up
- Backwards compatible
Wi-Fi 6 improves everything
Advanced Wi-Fi technology delivers faster speeds, less lag and higher capacity, allowing more simultaneous connections on your home network.
Gigabit broadband internet access
All Gigabit Ethernet ports allow you to take full advantage of your broadband speed of up to 1 Gbps. Connect your PCs, smart TVs and games consoles to one of the three Gigabit Ethernet LAN ports for fast and reliable wired connections.
WiFi coverage throughout your home
4 powerful external antennas amplify WiFi signals throughout your home. Beamforming technology detects devices and concentrates the wireless signal strength on them, especially for previously hard-to-reach sockets.
WPA3 - New level of cyber security
The latest Wi-Fi security protocol, WPA3, offers new features to improve cyber security on private networks. More secure encryption in Wi-Fi password security and improved protection against brute force attacks ensure your home Wi-Fi is protected.
Scope of delivery:
- Archer AX12 wireless router
- Power adapter
- RJ45 Ethernet cable
- Quick installation guide
Top Pick

- 2x Gigabit SFP WAN/LAN ports
- 1x RJ45 Gigabit WAN port
- 1x RJ45 Gigabit LAN/WAN port
- 8x RJ45 Gigabit LAN ports (PoE+)
- 1 GB DDR3 DRAM
- 20 IPSec VPN tunnels
3-in-1 router, more than a router
The 3-in-1 ER7212PC is a complete solution for home networks and small businesses.
With a single compact box, users can replace their router, hardware controller and PoE+ switch setup.
There is no need to manually configure various network devices one by one, you can perform unified deployment through ER7212PC.
All you need is one device.
Integrated PoE+ switch
Dedicated 8× PoE+ ports (110W total PoE power budget*) for PoE-supported devices such as access points, IP cameras and IP phones, reducing infrastructure costs for small businesses.
Embedded Omada SDN Controller
With the embedded Omada SDN controller, you don't need to configure additional management devices with ER7212PC.
You only need one device to manage and upgrade other devices in bulk.
Up to four WAN Gigabit ports for optimal bandwidth utilization.
Equipped with multiple ports, the ER7212PC meets various requirements for Internet access through one device.
The multi-WAN load balancing function distributes data streams according to the bandwidth share of each WAN port to increase the utilization of multi-line broadband.
Easy installation, quiet heat dissipation
A clean, well-organized and quiet network environment is at your disposal.
The compact and minimalist design makes it suitable for your configuration in different rooms, whether it is the corner of an office desk or the ceiling of a store.
The fanless design provides silent heat dissipation to your stores or offices.
High-security and high-performance VPN
The ER7212PC supports pass-through traffic and multiple VPN protocols, including OpenVPN, IPSec, PPTP and L2TP in client/server mode.
One-click Auto-IPSec VPN simplifies VPN configuration and eases network management and deployment.
Powerful firewall
Advanced firewall policies protect your network and data.
IP/MAC/URL/keyword filtering
Forcefully prevent viruses and intruder attacks.
Convenient VLAN support
Create virtual network segments for enhanced security and simplified network management.
IP MAC binding
Reserve static IP assignment for endpoints to protect against ARP attacks and spoofing.
DoS defense
Automatically detects and blocks Denial of Service (DoS) attacks such as TCP/UDP/ICMP flooding, Ping of Death, and other similar threats.
One-click ALG activation
One-click ALG activation for applications such as FTP, H323, SIP, IPSec, and PPTP.
Excellent

• Speeds of up to 1200 Mbit/s as per Homeplug AV2 via existing power lines, ideal for interruption-free HD video streaming and online gaming
• Three Gigabit LAN ports for connecting network devices such as TVs, games consoles and laptops to the Internet
• Uses all three lines in your power supply network for stable data transfer at high speeds
• The integrated front power socket ensures that you do not lose a socket
• Range of up to 300 m via existing power lines
• Easy installation with Plug & Play
TP-LINK's TL-PA8030PKIT uses your existing power lines to transfer data. You can set up a new network simply by connecting the two Powerline adapters, without having to lay any cables. With transmission speeds of up to 1200 Mbit/s for interruption-free HD video streaming and online gaming, the TL-PA8030PKIT is the ideal partner for your home entertainment system.
1200 Mbit/s as per HomeplugAV2 — ideal for bandwidth-intensive applications
The TL-PA8030PKIT supports the new Homeplug AV2 Powerline standard with ultra-fast data transfer rates of up to 1200 Mbit/s. Thanks to 2x2 MIMO technology, all three power lines in your power supply network are used for data transfer. This means much faster transfer rates, so you can benefit from a stable signal for interruption-free HD video streaming and online gaming — even in remote rooms or the attic!
Multiple Gigabit LAN ports for maximum connectivity
Three Gigabit LAN ports per adapter make the TL-PA8030PKIT the ideal partner for your home entertainment system. Connect up to five network devices such as NAS, Smart TVs, desktop PCs and game consoles to the adapter via LAN cable to integrate them into the Powerline network.
Integrated front socket for greater flexibility
The integrated front socket with an output of up to 16 A/3500 W can be used as a standard socket, so you can plug the device previously connected back in again and don't have to lose a socket. The integrated noise filter reduces the susceptibility of the Powerline transmission to interference.
Up to 80% energy saving
The TL-PA8030PKIT belongs to a new generation of Powerline adapters and is considerably more energy efficient. If no data is transferred for a certain amount of time, the device automatically switches to energy-saving mode and then saves up to 85%* energy.
Recommended

- IEEE 802.11ax 6 GHz up to 2402 MBit/s
- IEEE 802.11ax/ac/n/a 5 GHz up to 2402 MBit/s
- IEEE 802.11ax/n/b/g 2.4 GHz up to 574 MBit/s
- 6x fixed high performance antennas
- 1x RJ45 Gigabit Ethernet WAN port
- 4x RJ45 Gigabit Ethernet LAN ports
- 1x USB 3.0 port
WiFi 6E: A freer and faster future
WiFi 6E introduces the brand new 6 GHz band without overlap or interference from other bands and legacy devices.
This means a congestion-free frequency that offers more bandwidth, faster speeds and lower latency.
Maximize the speeds of all your devices
The Archer AXE75 offers WiFi speeds of up to 5400 Mbps, so your devices can operate at full speed.
Enjoy smooth 4K/8K streaming, immersive AR/VR gaming, and lightning-fast downloads.
More RAM, better processing
Thanks to the advanced chipset and large RAM, you'll experience fast connections with minimal latency even under heavy load.
Every click and tap on your laptop or phone is answered faster.
Connect more - stay fast
The number of IoT devices today places greater demands on home WiFi.
The Archer AXE75 future-proofs your home network with increased capacity of up to 200+ devices.
OFDMA and other advanced technologies reduce clutter in your frequency bands and eliminate latency and jitter.
WiFi coverage throughout your home
6× high-performance antennas amplify WiFi signals throughout your home.
Beamforming technology detects devices and focuses signals on them, especially in previously hard-to-reach areas.
USB 3.0
Share files with an external drive for connected devices.
Or create your own personal cloud storage for easy, secure access from anywhere.
TP-Link OneMesh™ Flexible Whole Home WiFi Setup with Archer AXE75.
OneMesh™ is an easy way to build a mesh network with a single WiFi name for seamless whole-home coverage.
Simply connect a OneMesh™ range extender to a OneMesh™ router. No more searching for a stable connection.
TP-Link HomeShield: Advanced security for your everyday devices.
With TP-Link HomeShield, you'll enjoy advanced security features that create a safe environment that protects the data and privacy of your family and network.
WPA3: Stronger security for your network.
The latest WiFi security protocol, WPA3, offers new features to improve cybersecurity on private networks.
More secure encryption in WiFi password security and improved protection against brute force attacks keep your home network safe.
Easy to set up and use
Whether you prefer the intuitive Tether app or TP-Link's powerful web interface, you can set up your Archer AXE75 in minutes.
With the Tether app, you can manage...
Featured

• 5 gigabit RJ45 ports with auto negotiation and auto MDI/MDIX
• Network monitoring, traffic prioritisation and simple VLAN applications
• Energy-efficient Green IT reduces energy consumption by up to 75%*
• Plug & play, no configuration necessary
• Central management of all your Easy Smart switches via the Easy Smart Configuration Utility
The TL-SG105E 5-port Gigabit Easy Smart Switch from TP-LINK provides a simple way to transition to managed switches. Thanks to port mirroring, loop detection and cable diagnostics, data traffic is easy to monitor. The administrator port-/tag-based QoS is available to optimise data transmission. Port-/tag-/MTU-based VLAN also increases security by segmenting the network.
Furthermore, innovative green IT reduces the energy consumption of the TL-SG105E by up to 75%*. As a result, this environmentally friendly solution for your home and office networks not only helps you save energy, but also helps lower costs.
* The actual values may vary depending on network and environmental factors.
Simple but effective management
TP-LINK's TL-SG105E offers your various options for network monitoring. By means of port mirroring, loopback detection and cable diagnostics, you can detect connection problems in your network and even locate them. Furthermore, you can prioritise the data traffic using port priority and 802.1p priority to ensure that VoIP and video streaming are always fluid and free from delays.
To further improve security and performance, the TL-SG105E supports MTU-VLAN, port-based VLAN and 802.1q-based VLAN. With its basic management functions, the Easy Smart Switch therefore occupies a level above the unmanaged software switches, and offers great added value at a similar price.
Switch your network to green
The TL-SG105E 5-port Gigabit Easy Smart Switch has the latest innovative, energy-efficient technology, which can expand your network capacity which simultaneously using significantly less energy. It adapts the power consumption to the link status and the cable length automatically to improve your network's ecological balance sheet.
Switching off inactive ports
If a computer or network device is switched off, the corresponding port of a traditional switch will continue to use a significant amount of power. The TL-SG105E detects the link status of the individual ports automatically and reduces the power consumption of ports that are idle.
Energy allocation according to cable length
In an ideal situation, shorter cables consume less power, because less energy is lost over short distances. However, for most conventional devices maximum output is used for every cable length. TP-LINK's green IT detects the length of the connected Ethernet cable and adjusts the transmission output accordingly, instead of keeping the energy level...
Alternative

- Wi-Fi speeds of up to 300 Mbit/s, making this router ideal for basic Internet applications
- Two external antennas ensure optimal Wi-Fi coverage and range
- Easy Wi-Fi security encryption by pressing the WPS button
- The IP-based bandwidth control allows optimum allocation of power capacity per user
Wi-Fi speeds of up to 300 Mbit/s
With speeds of up to 300 Mbit/s, the TP-LINK TL-WR840N Wi-Fi router delivers the bandwidth required for a wide range of basic Internet applications such as emailing, chatting and surfing. Equipped with two external antennas for optimal range and four 10/100-Mbit/s LAN ports, this router is ideal for users seeking excellent value for money.
External antennas for optimal coverage
The two external antennas on the TL-WR840N can maintain high speeds, even over long distances. This further increases coverage and provides an even more reliable connection, giving you a stable Wi-Fi signal wherever you are in your home.
CCA technology for a stable Wi-Fi signal
The clear channel assessment (CCA) technology automatically selects the best available channel to give you higher performance and a more stable connection.

- 16x RJ45 Gigabit Ethernet (8x PoE+)
- Fanless
- PoE total power budget
- 16 GBit/s switching capacity
Power over Ethernet for simplified network deployment
The switch has eight 802.3af/at-compliant PoE+ ports and supports a PoE power budget of up to 120W.*
Designed to use a single Ethernet cable for both data and power, it provides flexible deployment for PoE-supported devices such as wireless access points, IP cameras, and IP phones, reducing infrastructure costs for small businesses.
Access Control List (ACL)
ACL serves as a virtual administrator, allowing all connected devices to retrieve data according to user-defined network rules and helping you create the network rules you need.
QoS for a delay-free experience
Prioritize traffic based on QoS to ensure latency-sensitive applications like voice and video remain clear and delay-free.
VLAN for security
Use VLAN to achieve logical grouping management of devices on different physical LANs, improve information security, and reduce data congestion.
Easy management with the Omada app
Follow configuration instructions in the free Omada app to complete setup in minutes.
With Omada, you can configure settings, monitor network status, and manage clients - all from the convenience of a smartphone or tablet.
Package contents:
- TL-SG2016P
- Power adapter
- Manual
- Rubber feet
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and varies due to customer limitations and environmental factors.

- 24x RJ45 Fast Ethernet Ports
- 2x RJ45 Gigabit Ethernet Ports
- 2x Combo Gigabit Uplink RJ45/SFP Ports
- 2x fans
- 250 W PoE total power budget
- 12.8 GBit/s switching capacity
Dedicated 24 PoE + ports (250 W budget) for multiple applications
Compliance with 802.3af / at PoE + standard supports up to 30 W on each PoE port.
The total PoE + budget of 250 W PoE * for the PoE + ports with 24 × 10/100 Mbit / s provides a wide range of applications, such as surveillance, offices, dormitories and small businesses.
It is fully compatible with IP cameras, access points, IP phones, computers, printers and so on.
Software Defined Networking (SDN) with cloud access.
Omada's Software Defined Networking (SDN) platform integrates network devices, including access points, switches and gateways, and provides 100% centralized cloud management.
Omada creates a highly scalable network controlled from a single interface.
Seamless wireless and wired connectivity is provided, ideal for use in hospitality, education, retail, offices and more.
Package contents:
- TL-SL2428P
- Power cord
- Installation Guide
- Rackmount Kit
- Rubber feet

• Complies with standards IEEE 802.3ab and IEEE 802.3z.
• The FX-port supports Hot-Swap
• Fibre-optic transmission distance of up to 0.55 km for the multimode fibre and 10 km for the single mode fibre.
The MC220L is a media converter designed for converting 1000BASE-SX fibre media into 1000Base-TX copper media and vice versa. The MC220L was designed according to the IEEE802.3ab 1000Base-T standard and the IEEE802.3z 1000Base-SX/LX/LH standard and is intended for use with multimode fibre-optic cables and the SC plug. It functions at 850nm for both transmitting and receiving data when using multimode fibre-optics and at 1310nm for both transmitting and receiving data when using a single mode fibre-optic cable.
Other features of this module include: the option of using the device as a stand-alone device (no enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, and status LED on the front. The MC220L transmits in fibre-optic long distance mode via the multimode fibre-optic cable up to a distance of 550 m and via a single mode fibre-optic cable up to a distance of 10 km.
- Standards and protocols: IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
- Basic function: Full duplex flow control IEEE 802.3x
Increases the fibre range to 0.5 km if a 50/125 µm fibre is used
- Ports: 1-Gigabit SFP-port
1000M RJ45 port (auto MDI/MDIX)
- Network media 1000BASE-T: Category 5 UTP cables, 5e (maximum 100 m)
EIA/TIA-568 100Ohm STP (maximum 100 m)
- Network media 1000BASE-FX: Multimode/single mode fibres
-LED display: PWR, LINK, RX
- Dimensions (LxWxH) 94.5 mm*73.0 mm*27.0 mm
Power supply: External voltage adapter

- 8 10/100/1000Mbps RJ45 ports
- Equipped with 8 PoE+ supported ports to transfer data and power over a single cable
- Works with IEEE 802.3af/at compliant devices, expanding home and office networks
- Innovative energy-efficient technology reduces power consumption by up to 75%
- Supports PoE+ standard with total power budget of 126W and up to 30W per port
- Plug and play design, no configuration required
The TL-SG1008MP is an 8-Port Gigabit Desktop/Rack mountable Switch with all 8 ports supporting the PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable. With a total power budget of 126W, up to 30W per port, TL-SG1008MP can power more high-powered devices such as wireless Access Points (APs), IP Cameras or IP Phones. Moreover, with innovative energy-efficient technology, the TL-SG1008MP can save up to 75% of the power consumption, making it an eco-friendly solution for your business network.
How This Product Works
All 8 ports of TL-SG1008MP support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). In this situation, the electrical power is transmitted along with data in a single cable, allowing you to expand your network where there are no electrical cables or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones.

- 8× 10/100Mbos Auto-Negotiation RJ45 port, supporting Auto-MDI/MDIX
- Green Ethernet technology saves power
- IEEE 802.3X flow control provides reliable data transfer
- Plastic casing and desktop design
- Plug and play, no configuration needed
- Fanless design ensures quiet operation
Easily Expand Your Network and Save Energy
8-Port 10/100 Mbps Desktop Switch
Let LiteWave Bring You Lighter Network Life
The TP-Link LiteWave Series Unmanaged Switches provide easy and affordable way to expand your wired network. They are easy to use and reliable. With these plug-and-play switches, you can expand your network connections to multiple devices instantly. With all ports support Auto-MDI/MDIX, there’s no need to worry about the type of cable to use.
Plug and Play
- Connect to Power
- Connect The Devices
- Enjoy
Go Green with Your Ethernet
The LiteWave Series also supports energy-efficient technology, helping you save power and money. Power consumption automatically adjusts according to link status and cable length, allowing you to expand your network while minimizing your carbon footprint. Save the planet and lower your energy bills - it’s a win-win!
Fanless and Desktop Design
Compact desktop design, to meet your needs in any environment.
Besides, fanless design ensures quiet operation.
Use Where You Need, However You Need
The LS1008 is fully compatible with networked devices such as computers, printers, webcams, IPTVs. It has a wide range of application scenarios and is suitable for networking in school dormitories, surveillance, homes, and small businesses.

4G/LTE network everywhere
The Archer MR400 supports the LTE/4G cellular standard with up to 150 Mbps download speeds for uninterrupted video streaming and online gaming. It is also compatible with FDD-LTE and TDD-LTE, so that almost all operators in the world can be supported.
- Supports the 4G/LTE mobile standard with download rates of up to 150 Mbps, connections for more than 65 devices simultaneously
- Simultaneous dual band according to 802.11ac: up to 300 Mbps on 2.4 GHz and 867 Mbps on 5 GHz
- No configuration required - simply insert SIM card and put LTE hotspot into operation
- Two detachable antennas for a stable and efficient connection
- Freely configurable LAN/WAN port for alternative connection via cable or fiber optic modem
Plug and play!
No configuration required
With an internal LTE modem and SIM card slot, all you need to do is insert a SIM card and switch on the Archer MR400. A fast, stable WLAN connection is available almost everywhere.
WLAN where you need it
The Archer MR400 takes you into a new dimension of convenience and versatility. Nowadays it can be very important to be able to use a powerful WLAN at any time. The Archer MR400 is the perfect solution, whether you're at home or on the move.
Connections for more than 64 devices simultaneously
The Archer MR400 can provide lag-free connections for more than 32 devices, e.g. cell phone, laptop and PC. With its LAN/WAN port, the TL-MR6400 offers an alternative broadband connection option.
Simple operation via the Tether app
With the Tether app, you can manage the Archer MR400 simply and easily via any iOS or Android device.

- 5× 10/100Mbos Auto-Negotiation RJ45 ports, supporting Auto-MDI/MDIX
- Green Ethernet technology saves power consumption
- IEEE 802.3X flow control provides reliable data transfer
- Plastic casing and desktop design
- Plug and play, no configuration required
- Fanless design ensures quiet operation
Easily Expand Your Network and Save Energy
5-Port 10/100 Mbps Desktop Switch
Let LiteWave Bring You Lighter Network Life
The TP-Link LiteWave Series Unmanaged Switches provide easy and affordable way to expand your wired network. They are easy to use and reliable. With these plug-and-play switches, you can expand your network connections to multiple devices instantly. With all ports support Auto-MDI/MDIX, there’s no need to worry about the type of cable to use.
Plug and Play
- Connect to Power
- Connect The Devices
- Enjoy
Go Green with Your Ethernet
The LiteWave Series also supports energy-efficient technology, helping you save power and money. Power consumption automatically adjusts according to link status and cable length, allowing you to expand your network while minimizing your carbon footprint. Save the planet and lower your energy bills - it’s a win-win!
Fanless and Desktop Design
Compact desktop design, to meet your needs in any environment.
Besides, fanless design ensures quiet operation.
Use Where You Need, However You Need
The LS1005 is fully compatible with networked devices such as computers, printers, webcams, IPTVs. It has a wide range of application scenarios and is suitable for networking in school dormitories, surveillance, homes, and small businesses.

- 16 RJ45 Mbps auto-tune and auto-MDI/MDIX ports
- Green IT saves up to 70% energy
- IEEE802.3x flow control ensures reliable data transmission
- Plastic housing for table-top or wall mounting
- Plug-and-play, no configuration required
Product Functionalities
The TL-SF1016D Fast Ethernet Switch is designed for SOHO (small Office / Home Office) or workgroup users. All 16 ports support auto MDI/MDIX. Don't worry about the type of cable, just plug it in and go. In addition, with its innovative, energy-efficient technology, the TL-SF1016D can save up to 70% of the energy consumption and 70% of the packaging material can be recycled, making it an environmentally friendly solution for your business network.
High Performance
The TL-SF1016D Fast Ethernet switch provides 16 RJ45 Mbps auto-tuning ports. All ports support auto MDI/MDIX, which eliminates the need for crossover cables or uplink ports. With its non-blocking switching architecture, the TL-SF1016D filters and forwards incoming packets at full cable speed for maximum throughput. Support for 9k jumbo frames significantly improves performance when transferring large files. And the IEEE802.3x flow control for full duplex mode and the backpressure for half duplex mode relieve data jams and let the TL-SF1016D work reliably.
Green IT from TP-LINK
This new generation Fast Ethernet switch TL-SF1016D features the latest innovative energy-efficient technology that significantly increases your network capacity with much less power. It automatically adjusts power consumption based on link status and cable length to improve the carbon footprint of your network.
It also complies with EU RoHS, which prohibits the use of certain hazardous substances. In addition, 70% of the packaging material can be recycled.
Easy to use
The automatic functions of this Gigabit switch make installation easy thanks to plug-and-play. No configuration is required. Auto-MDI/MDIX eliminates the need for crossover cables. Auto-tune on each port detects the link speed of a network device (10 or 100 Mbps) and intelligently adjusts to ensure compatibility and optimal performance.

- 16 Gigabit RJ45 ports with auto-tune and auto-MDI/MDIX
- Plug-and-play, no configuration required
- Stable metal housing for optimal quality and professional performance
- Centralized management of all your easy-Smart switches via the easy-Smart Configuration Utility
- Energy-efficient Green IT saves energy
TP-LINK's TL-SG116E 16-port Gigabit easy Smart Switch is an ideal upgrade for unmanaged switches. It fits not only into your home network, but also into your small business network. Thanks to the Plug&Play design, installation is child's play. The highly qualified metal housing protects the interior components. In addition, the TL-SG116E is also equipped with intelligent management functions such as QoS, VLAN and IGMP snooping.
Easy To Use
The TL-SG116E is easy to set up and use. Auto-MDI/MDIX eliminates the need for crossover cables. Auto-tune on each port detects the link speed of a network device and intelligently adjusts to ensure compatibility and optimal performance.
Sturdy Metal Housing
The interior components of the TL-SG116E are protected by a durable metal housing and guarantee a long-term service life. After several rigorous testing procedures and tests, you can rely on the TL-SG116E. The compact size also fits for use on desktops or workbenches.
Additional Software Specifications
The excellent performance of the TL-SG116E is demonstrated not only in the simple plug-and-play network, but also in more demanding environments. Network monitoring allows users to easily monitor traffic. Port mirror, loopback detection, and cable diagnostics help you identify and even locate connectivity problems in your network. You can also prioritize traffic based on port priority and 802.1p priority to ensure that VoIP and video streaming always run smoothly and without delay. The TL-SG116E combines security with network performance and supports MTU VLAN, port-based VLAN, and 802.1Q-based VLAN capabilities.
Turn your network to green
The TL-SG116E 16-port Gigabit easy Smart Switch features the latest innovative, energy-efficient technology that can significantly expand your network capacity while reducing power consumption. It automatically adjusts power consumption according to link status and cable length to improve the eco-balance of your network.

- 3x RJ45 Gigabit Ethernet ports
- Powerline: up to 1300 Mbps
- Ethernet: 10/100/1000 Mbps
TP-Link OneMesh™ onemesh
TP-Link OneMesh technology easily and flexibly reaches all weak signal areas and wireless holes with a single stable and fast WLAN.
Expand your OneMesh network with OneMesh, whether it's a OneMesh repeater, OneMesh powerline adapter or OneMesh router.
Slow connections, signal interruptions, complicated and cumbersome setup is over.
OneMesh™ - The networking solution for your home.
More stable connection at the same time
2×2 MIMO adds another transmission at the same time and enables the provision of parallel data streams.
So you benefit from significantly higher transmission rates, much more stable connections and twice the resilience.
Greater range
2×2 MIMO technology with beamforming maximizes performance on the individual lines.
This improves range, especially to more distant outlets.
Plug and Play
Plug the TL-PA8010P adapter into the wall outlet and connect it to the router.
Then plug in the TL-WPA8631P WLAN adapter where you need WLAN.
Note: Connect the two adapters by using the pair button.
Package contents:
- 1x TL-WPA8631P
- 1x TL-PA8010P
- 2x network cable
- 1x manual

- 9× 10/100 Mbps RJ45 ports
- 8× PoE+ ports transfer data and power on individual cables
- Works with IEEE 802.3af/at compliant PDs
- Up to 250 m data and power transmitting range under Extend Mode**
- Priority Mode ensures high priority of ports 1-2 to guarantee the quality of sensitive application
- Supports PoE Power up to 30 W for each PoE port
- Supports PoE Power up to 65 W for 8 PoE ports*
- Plug and play with no configuration required
Professional 9-Port Switch with 8-Port PoE+ (65W Budget) for Numerous Applications
Compliance with the 802.3af/at standard supports up to 30 W on each PoE port.
The total 65 W PoE power budget* for the 8x PoE+ ports opens up a wide range of applications, such as surveillance for offices, dormitories and small businesses.
It is fully compatible with IP cameras, access points, IP Phones, computers, printers and more.
Ideal for IP Surveillance - up to 250 m Transmissions
With extend mode, the PoE transmssion distance reaches up to 250 m* - perfect for IP Camera deployment in large areas.
Ideal for IP Surveillance - Higher Performance and Security
Priority Mode and Isolation Mode make surveillance smoother an safer.
- Priority Video Quality Guaranteed
Quality of sensitive applications like video monitoring in critical business areas is guaranteed by offering higher priority options for ports 1-2 when one-touch Priority Mode is on. - One-Click Traffic separation for ports 1-8
With one click, Isolation Mode easily divides traffic ports 1-8 to avoid snooping and tampering.
This enables the switch to isolate broadcast storm, improving LAN security and data transmission.
Intelligent Power Management
When total power consumption exceeds 65 W, the intelligent power management will cutthe lower priority port power.
This ensures the high priority ports power supply and protects the device from overload.
It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged.
Durable Metal Casing
The interior components of TL-SF1009P are protected by high-quality metal casing to ensure a long product life.
Having passed an array of stringent reliability tests, TL-SF1009P delivers switching performance you can depend on.
- Compact Desktop Design
- Wall-Mounting
- Fanless Design
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports which are under extend mode will be downgraded to 10Mbps. Actual...

The TL-SM5310-T provides superior 10G performance for easy and fast connection between your SFP+ interface and an RJ45 port.
With up to 30m range at 10Gbps over UTP cat.6a network cable (or higher) and plug and play design, this module allows you to easily deploy 10Gbps speeds without even needing a technician.
The high-quality metal housing ensures high robustness and reliability over a long period of time, ensuring a stable connection in a wide range of deployment scenarios.
- Supports 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T and 100BASE-TX
- Data transmission up to 30m* at 10Gbps (UTP Cat.6a or higher)
- Supports DDM (temperature and voltage)
- Hot-pluggable SFP+ footprint features
- Supports TX disable function
- Commercial product Operating temperature range: 0-70°C
- Fully metallic housing for low EMI
Package contents:
- 10G BASE-T RJ45 SFP+ Module TL-SM5310-T
- Installation guide
TL-SM5310-T is fully compatible with all current TP-Link switches that offer SFP+ ports , but with various fiber devices from other manufacturers.
Network equipment accessories REICHELT IE Best Products

- 1× Gigabit SC Fiber Port
- 1× 10/100/1000 Mbps RJ45 Port (Auto MDI/MDIX)
- Automatic negotiation of half-duplex/full-duplex transmission mode .
- Adopts WDM technology and transmits and receives data over a single fiber .
- Extends the fiber distance up to 2 km
TL-FC311B-2 is a gigabit media converter with a gigabit RJ-45 port and a gigabit SC fiber port that can convert between electrical and optical signals.
Long distance fiber optic data transmission can be applied to commercial scenarios such as parking security monitoring and wireless networking.
The TL-FC311B-2 uses Wavelength Division Multiplexing (WDM) technology, which allows data to be transmitted and received at distances of up to 2 km using only a single-mode optical fiber.
This saves customers half the cost of cable provisioning.
TL-FC311B-2 transmits data at a wavelength of 1310 nm and receives data at a wavelength of 1550 nm on one optical fiber.
Therefore, the terminal device used in conjunction with TL-FC311B-2 should transmit data with a wavelength of 1550 nm and receive data with a wavelength of 1310 nm.
TP-Link Another media converter TL-FC311A-2 is one of the products that can work together with TL-FC311B-2.
In addition, this media-converter can be used as a stand-alone device (no rack required) or with TP-Link's TL-FC1420 rack for auto-MDI / MDI-X in the TX port, in which the duplex mode is automatically negotiated.

• Works according to standards 802.3u 10/100Base-TX, 100Base-FX.
• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.
• Uses WDM and transmits and receives data via a single fibre.
The MC111CS is a media converter designed for converting 100BASE-FX fibre media into 100Base-TX copper media and vice versa. The MC111CS uses WDM and requires only one fibre-optic cable for transmitting and receiving data, reducing your cable costs by half. The MC111CS was designed according to the IEEE802.3u 10/100Base-TX standard and the 100Base-FX standard and is intended for use with single mode fibre-optic cables and the SC plug. The MC111CS supports the long-wave (LX) laser specification for a transfer rate corresponding to the full bandwidth. It functions at 1550nm for transmitting data and at 1310nm for receiving data. This means that the other end device, which is designed to work with the MC111CS, has to function at 1310nm for transmitting data and at 1550nm for receiving data. Other media converters from TP-LINK that could work with the MC111CS include the MC112CS.
Other features of this module include: the option of using the device as a stand-alone device (no additional enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, auto-tuning in duplex mode at the transmission port and status LED on the front. The MC111CS transmits in fibre-optic long distance mode via the single mode fibre-optic cable up to a distance of 20 km.
• Auto-tuning from 10/100 Mbps and auto MDI/MDI-X at the TX port.
• Offers the switch configuration for the half-duplex/full duplex transmission mode for the FX port.
• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.
• Uses WDM and transmits and receives via a single fibre.
• Fibre-optic transmission distance of up to 20 km.
• Easily visible LEDs display the status, allowing the network to be easily monitored.
• External power supply unit.

- Surf simultaneously for up to 10 devices
- The 2000mAh battery provides energy for up to 8 hours of mains-independent operation
- Supports the 4G FDD/TDD LTE mobile phone standard, compatible with mobile phone networks in most countries and regions
Whether it's smooth HD streaming, downloads in seconds or online gaming, everything is possible.
WLAN connection for up to 10 devices
With TP-Links 4G/LTE M7000 WLAN Router, you can use the 3G/4G mobile connection with up to 10 wireless devices such as tablets, smartphones, laptops, etc.
Up to 8 hours of unlimited mobility
With its powerful 2000mAh battery, the M7000 can be operated for up to 8 hours without mains power.
The M7450 is perfect for private or business travel, outdoor activities and much more.
* Actual battery life may vary depending on usage and environment
Installation within seconds
The M7000 has a compact and user-friendly design.
All you need to do is insert the SIM card and press the power button, and the high-speed 4G hotspot is ready for use in half a minute.
Easy management with the tpMiFi app
The tpMiFi app allows you to easily manage your M7000 from any iOS device.
Set data limits, monitor which devices can connect to your network and send messages.

• Green Ethernet technology saves up to 70% energy
• IEEE 802.3x flow control ensures reliable data transmission
• Plastic enclosure for desktop or mounting on the wall
• Plug & play, no configuration necessary
Easy to operate
The automatic functions of this Gigabit switch make the installation trouble-free thanks to plug and play. No configuration necessary. Auto MDI/MDIX eliminates the necessity of crossover cables. Auto-coordination on every port recognises the connection speed of a network device (10, 100 or 1000 Mbps) and adapts it intelligently to ensure compatibility and optimum performance.
*Maximum energy savings compared to a conventional TP-LINK switch. The actual savings may vary based on the operating conditions.
Switch to green with your Ethernet
You now have the option of choosing the green path if you want to upgrade to a Gigabit network! This TL-SG1005D 5-port Gigabit desktop switch has the latest innovative, energy-efficient technology, which can significantly expand your network capacity, while at the same time consuming much less energy. It adapts the power consumption to the link status and the cable length automatically to improve your network's carbon dioxide footprint.
Powers down when ports are not active
If a computer or network device is switched off, the corresponding port of a traditional switch will continue to use a significant amount of power. The TL-SG1005D detects the link status of the individual ports automatically and reduces the power consumption of the ports that are idle, reducing power consumption by up to 80% here.
Energy allocation according to cable length
In an ideal case, shorter cables would consume less power because less energy is lost over the length of the cable. However, this is not the case for most devices, because they send the same amount of energy over the cable, regardless of which length is used.
Gigabit switch
Equipped with 5 10/100/1000Mbps ports, the TL-SG1005D expands your network capacity significantly, which allows for the immediate transfer of large files. As a result, power users can now move large, bandwidth-intensive files faster at home, in the office in a work group or in a creative production environment. Transfer documents, programs or multimedia files over the network without delay.
What this product does
The TL-SG1005D 5-port Gigabit Desktop Switch from TP-LINK provides a simple way to transition to Gigabit Ethernet. Increase the speed of your network servers and backbone connections or make Gigabit a reality in your workplace. In addition, the TL-SG1005D is designed for lower power consumption. With the innovative, energy-efficient technology of the TL-SG1005D, you can reduce energy consumption by up to 70%*, which also makes this device...

- 8x 10/100/1000 Mbit/s auto-negotiation RJ45 ports supports auto MDI/MDIX
- Green Ethernet technology reduces power consumption after use
- IEEE 802.3x for reliable data stream control
- Metal enclosure for easy mounting on a table or wall
- Supports 802.1p/DSCP QoS function
- Plug and play - no configuration required
Expands your network
The TP-Link 8-port 10/100/1000 Mbit/s desktop switch from the new TP-Link LiteWave series offers an easy way to expand your network. The plug-and-play design makes the product easy to use. No configuration is required. Auto MDI/MDIX also eliminates the need for crossover cables.

The TL-POE170S PoE++ injector complies with IEEE 802.3af/at/bt* standards with power up to 60W.
It can easily extend your network where there is no power line or outlet, where you want to mount devices such as PTZ IP cameras, LED, etc.
- 2 Gigabit ports provide faster transmission
- Complies with IEEE802.3af/at/bt* standards, delivers up to 60W
- Reduces infrastructure costs by simultaneously transmitting data and power over a single network cable
- Automatically determines and delivers exact power to meet device needs
- Wall-mount and desktop design accommodate most installation scenarios
- Plug and play installation, no configuration required
- Integrated power supply
- Rugged metal housing
Package contents:
- PoE++ Injector TL-POE170S
- Manual
- Power cable
- RJ45 cable
*TL-POE170S is not compatible with EAP235, EAP225 and EAP225-Outdoor. It is recommended to use TL-POE160S to power these EAPs.

Parental Controls
manage responsible internet access for your children
Guest Network
provides separate access for guests while securing the home network
Firewall Security
supports DoS, SPI Firewall, IP Addressing/Domain Filter, IP/MAC Address Binding
Quality of Service
prioritizes network traffic by device or application
IPTV IGMP Proxy/Snooping
supports Bridge and Tag VLAN for smooth IPTV application
IPv6
compatible with IPv6 (Internet Protocol version 6)
Multilingual Interface
provides hassle-free configuration in six languages (EN/DE/IT/TR/RU/PO)
Upgrade Internet, Upgrade Home Entertainment
AC1200 Wireless VDSL/ADSL Modem Router Archer VR300
Upgrade AC Wi-Fi to Enjoy Wireless Entertainment
As a powerful DSL modem router, the Archer VR300 makes full use of its Wi-Fi abilities by providing combined dual band Wi-Fi speeds of up to 1200Mbps.
300Mbps on 2.4GHz is perfect for everyday surfing and emailing, while 867Mbps on 5GHz provides lag-free HD streaming and gaming.
Superfast VDSL Broadband
The latest VDSL2 technology allows the Archer VR300 to deliver impressive VDSL broadband speeds of up to 100Mbps, which is almost five times faster than ADSL2+.
The Archer VR300 serves as a DSL modem and wireless router, combining two devices in one.
The integrated DSL port supports all standard DSL connections, including VDSL2, ADSL2+, ADSL2, and ADSL.
External Antennas Greatly Expand Wireless Coverage
Four external antennas with advanced connection technology allow you to maintain impressive speeds, even over greater distances.
This means that you can enjoy incredible wireless coverage and reliability in any part of your large home or office.
Remote Control
With TP-Link Tether App and DDNS, you can control your home network wherever you are.
Safe, Family-Friendly Surfing
Parental Controls manage when and how connected devices can access the internet.
Guest Network keep your main network secure while creating a separate network for guests and visitors.
6kV Lightning Protection
6KV Lightning Protection provides shields against electrical damage caused by thunderstorms so that you can enjoy your life even in bad weather.
Package Contents
- External Splitter
- RJ11 DSL Cable
- RJ45 Ethernet Cable
- Power Adapter
- Quick Installation Guide

- 24x RJ45 10/100/1000 Mbps
- 4x Gigabit SFP Slots
- 1x RJ45 Console Port
- 1x Micro-USB Console Port
- Fanless
- 56 GBit/s switching capacity
Full Gigabit ports
24 × Gigabit RJ45 ports and 4 × Gigabit SFP slots provide high-speed connectivity.
Integrated with Omada SDN.
Zero-touch provisioning (ZTP)* , centralized cloud management and intelligent monitoring.
Centralized management.
Cloud access and Omada app for extreme convenience and easy management.
Static Routing.
Helps route internal traffic for more efficient use of network resources.
Robust security strategies.
IP MAC port binding, ACL, port security, DoS defense, storm control, DHCP snooping, 802.1X, radius authentication and more.
Optimize voice and video applications.
L2 / L3 / L4 QoS and IGMP snooping.
Standalone management.
Web, CLI (console port, Telnet, SSH), SNMP, RMON and Dual Image provide powerful management capabilities.
Package Contents:
- TL-SG3428 Switch
- Power Cord
- Quick Installation Guide
- Rackmount Kit
- Rubber Feet

• Four PoE ports that can transmit data and power via a single cable
• Works with IEEE802.3af-compliant PDs, enlarges the home and office network
• Requires no configuration
Product functionality
The TL-SF1008P 8-port 10/100 desktop switch allows for a seamless network connection. It combines a 100-Mbps Fast Ethernet with 10-Mbps Ethernet network capabilities.
How this product works
4 of the 8 auto-coordination RJ45 ports (port 1 to port 4) of the switch support the power-over-Ethernet (PoE) function. These PoE ports can recognise PoE devices automatically and supply IEEE802.3af-powered devices (PDs). In this situation the electrical power is transported together with the data in a single cable. The device makes it possible to expand your network where there are no power lines or outlets and where you would like to operate devices such as access points, IP cameras or IP phones, etc.
Behaviour in case of overloading
The TL-SF1008P has a priority* function which helps protect the system if the system performance is overloaded. If the entire power consumption of the PoE PDs is greater than or equal to 53 W, priorities are assigned under the PoE ports. The system then decides on the power distribution and the energy supply on the port with the lowest priority is switched off.
Port-priority function
*Priority (port 1> port 2> port 3> port 4): This function is there to protect the system if the PoE performance is overloaded. If, for example, ports 1, 2 and 4 each use 15.4 W (maximum power per port 15.4 W), the total power is 46.2 W (in this case, the PoE max LED is red). If an additional PD with 10 W is connected to port 3, the system port 4 will be switched off to prevent damage. This means that ports 1 and 2 can each consume 15.4 W, while port 3 can consume 10 W. No power is delivered on port 4.
Easy to operate
The TL-SF1008P is easy to install and use. It does not require any configuration. With its desktop design, outstanding performance and quality, the TP-LINK TL-SF1008P 8-port 10/100 desktop PoE switch is an excellent choice for expanding your home or office network.

- 16 10/100/1000Mbps RJ45 PoE+ Ports Switch with 2 SFP Slots
- PoE power budget is up to 192W, making it ideal for small to medium business surveillance systems
- Port Priority is able to guarantee the quality of sensitive application like video monitor
- Intelligent power management can protect the switch from overload
- QoS is for smooth internet-surfing experience and IGMP Snooping is capable of optimizing traffic for IPTV.
Ideal for Surveillance
TL-SG1218MPE complies with the 802.3af/at PoE+ standard, supporting up to 30W power supply on each PoE port.
The total high PoE power budget is up to 192W for the 16 PoE ports, making it ideal for small to medium business surveillance systems.
Intelligent Power Management
When total power consumption excels 192W, the intelligent power management will cut the lower priority port power off to ensure the high priority port’s power supply and protect the device from power overload operation.
QoS For Smooth Online Experience
Administrators can designate the priority of traffic based on QoS, for example, to ensure that voice and video applications remain clear and lag-free.
IGMP Snooping Traffic Optimization for IPTV
IGMP Snooping optimizes multimedia traffic delivery to ensure a better network experience especially for applications like IPTV.
Making Management Easy
TL-SG1218MPE offers network monitoring for users to observe traffic behavior.
Through its web-based user interface and management utility, the TL-SG1218MPE offers a variety of useful features, including network monitoring, traffic prioritization, and enhanced QoS.

- 16 10/100/1000Mbps RJ45 ports
- Equipped with 8 PoE+ supported ports to transfer data and power over a single cable
- With a total PoE power budget of 110W, up to 30W per port
- Works with IEEE 802.3af/at compliant devices, expanding home and office networks
- Simple network set-up on top of plug-and-play connectivity
- Web-based user interface and management utility simplify configuration
The TL-SG1016PE is an 16-Port Gigabit Desktop/Rack mountable Switch with 8 ports supporting the PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable. With a total power budget of 110W, up to 30W per port, TL-SG1016PE can power more high-powered devices such as wireless Access Points (APs), IP Cameras or IP Phones. Moreover, with innovative energy-efficient technology, the TL-SG1016PE can save up to 75% of the power consumption, making it an eco-friendly solution for your business network.
How This Product Works
8 ports of TL-SG1016PE support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). In this situation, the electrical power is transmitted along with data in a single cable, allowing you to expand your network where there are electrical cables or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones.

• Having 7 slots saves you having to constantly disconnect and reconnect your USB devices
The USB hub UH700 is ideal for adding additional USB ports to your computer. This allows you to connect up to 7 devices, such as USB data carriers, USB mice or USB printers at the same time, without having to constantly disconnect and reconnect your devices. The USB 3.0 ports support data transfer rates of up to 5 Gbps and are thus 10 times as fast as USB 2.0.
Fast data transfers
Thanks to its USB 3.0 ports, the UH700 is 10 times as fast as USB 2.0.
Expansion of your USB ports
The UH700 offers you 7 additional USB ports so that you do not have to constantly connect and disconnect the USB devices on your PC.
Secure and reliable
The UH700 has multiple support mechanisms to prevent damage to your connected devices.

• 5 gigabit RJ45 ports with auto negotiation and auto MDI/MDIX
• IEEE802.3x flow control for reliable data transmission
• Metal enclosure for desktop or wall mounting
• Supports QoS per IEEE802.1p
• Plug & play, no configuration necessary
Product functionality
The TL-SG105 5-port Gigabit Desktop Switch from TP-LINK provides a simple way to transition to Gigabit Ethernet. Increase the speed of your network servers and backbone connections or make Gigabit a reality in your workplace. In addition, the TL-SG105 is designed for lower power consumption. With the innovative, energy-efficient technology of the TL-SG105 you can reduce energy consumption by up to 65%*, which also makes this device an environmentally-friendly solution for your home and office network.
Gigabit switch
Equipped with 5 10/100/1000 Mbit/s ports, the TL-SG105 expands your network capacity significantly, which allows for the immediate transfer of large files. As a result, power users can now move large, bandwidth-intensive files faster at home, in the office in a work group or in a creative production environment. Transfer documents, programs or multimedia files over the network without delay.
Switch to green with your Ethernet
You now have the option of choosing the green path if you want to upgrade to a Gigabit network! This new generation TL-SG105 5-port Gigabit switch has the latest innovative, energy-efficient technology, which can significantly expand your network capacity, while at the same time consuming much less energy. It adapts the power consumption to the link status and the cable length automatically to improve your network's ecological balance sheet.
• Strom runter, wenn Ports nicht aktiv sind
If a computer or network device is switched off, the corresponding port of a traditional switch will continue to use a significant amount of power. The TL-SG105 detects the link status of the individual ports automatically and reduces the power consumption of the ports that are idle, which means an energy savings of up to 65%.
• Energiezuteilung nach Kabellänge
In an ideal case, shorter cables would consume less power because less energy is lost over the length of the cable. However, this is not the case for most devices, because they send the same amount of energy over the cable, regardless of their length.
Easy to use
The automatic functions of this Gigabit switch make the installation trouble-free thanks to plug and play. No configuration necessary. Auto MDI/MDIX eliminates the necessity of crossover cables. Auto-coordination on every port recognises the connection speed of a network device (10, 100 or 1000 Mbit/s) and adapts it intelligently to ensure compatibility and optimum performance.

- 48V passive PoE supported
- Auto-determine the necessary power requirements
- Convenient wall-mounting design
- Gigabit speed support
- Plug-and-Play, requires no configuration
Power Your Devices
Use the passive PoE adapter TL-POE4824G to simultaneously supply power and transmit data to a passive PoE device.
Convenient Wall-Mounting Design
TL-POE4824G offers a convenient wall-mounting brackets to be easily installed on a wall.
Compatible Devices
TL-POE4824G is recommended to offer power supply to TP-Link’s passive PoE products which as follows.

Ideal for all areas in which no DSL is available, as well as for ''mobile'' use e.g. for longer outdoor use (construction sites etc.).
- Ideal for use on the road or in rural areas without DSL availability
- Supports the 4G/LTE mobile standard with download rates of up to 150MBit/s.
- No configuration required - simply insert the SIM card and put LTE hotspot into operation
- Simultaneous dual band after 802.11ac: Up to 300 Mbps on 2.4GHz and 433 Mbps on 5GHz
- Freely configurable LAN/WAN port for the alternative connection via cable or fiber optic modem
TP-links Archer MR200 is ideal for use on the road or in rural areas without DSL availability. It supports the LTE/4G mobile standard with up to 150 Mbps in download and 50 Mbps in upload for uninterrupted video streaming and online gaming. Thanks to the built-in modem, only one unlocked 4G/LTE SIM card is required to put your own WLAN hotspot for several users/devices into operation.
Simple commissioning of a 4G/LTE connection
The Archer MR200 has an integrated 4G/LTE modem and a SIM card slot. All you need to do is insert an unlocked SIM card and you can get your 4G/LTE hotspot up and running. Setting up a fast and stable mobile connection has never been easier!
Dual band connection according to 802.11ac
The Archer provides you with MR200 data rates of up to 733 Mbps after 802.11ac via WLAN. It works on both the 2.4 and 5GHz bands, ensuring incredible wireless performance. This simultaneous operation gives you the flexibility of two dedicated wireless networks to which you can assign different purposes: Email, chat and surf at up to 300 Mbps on 2.4GHz and simultaneous online gaming and HD video streaming at up to 433 Mbps on 5GHz..
Wi-Fi where you need it
The Archer MR200 offers you the possibility to quickly and easily set up a 4G/LTE hotspot for multiple devices. This gives you Internet access wherever you need it - whether in the meeting room, on the construction site or in the holiday home.
WAN port for greater flexibility
With its LAN/WAN port, the Archer MR200 offers a further possibility of broadband connection via DSL, cable or fiber optic. This not only gives you more flexibility in choosing your ISP, but also gives you the option of a backup solution.

- 5x 10/100/1000 Mbit/s auto-negotiation RJ45 ports supports auto MDI/MDIX
- Green Ethernet technology reduces power consumption after use
- IEEE 802.3x for reliable data stream control
- Metal enclosure for easy mounting on a table or wall
- Supports 802.1p/DSCP QoS function
- Plug and play - no configuration required
Expands your network
The TP-Link 5-port 10/100/1000 Mbit/s desktop switch from the new TP-Link LiteWave series offers an easy way to expand your network. The plug-and-play design makes the product easy to use. No configuration is required. Auto MDI/MDIX also eliminates the need for crossover cables.

- HomePlug AV2 Standard
High-speed data transfer rates of up to 1000 Mbps, supporting all your online needs - 2 Gigabit Ports
Provides secure wired networks for desktops, smart TVs or games consoles - Plug and Play
Allows setup of your powerline network in minutes, so you can enjoy fast, seamless wired connections right away - Extra Power Socket
Ensures no power outlet goes to waste - Patented Power-Saving Mode
Automatically reduces power consumption by up to 85%
Extend an AV1000 Speed Network to Any Outlet
- No need for new wires or drilling
- Network passes through walls and floors
Integrating advanced HomePlug AV2 technology, this kit provides users with high-speed data transfer rates up to 1000 Mbps, which is ideal for bandwidth-intensive applications such as simultaneous HD/3D/4K video streaming, online gaming, and large file transfers. Just plug in and enjoy!
2× Gigabit Ports for High-Speed Connections
Provide reliable high-speed wired connections for game consoles, smart TVs, STBs, and more.
Don’t Worry about Occupying an Outlet
Simply plug into your TL-PA7027P KIT as though it were a normal wall socket.
Feel free to plug in PCs, smart TVs, or other wired appliances without any performance differences.
The built-in noise filter helps prevent electrical signal noise from affecting your powerline performance.
Up to 85% Power Saved
The future’s looking green for powerline adapters.
TL-PA7027P KIT’s practical design and sophisticated Power-Saving Mode, which automatically switches from its regular ''Working'' mode to ''Power-Saving'' mode, reduces its energy consumption by up to 85%.

- 16 Gigabit RJ45 ports with auto-tune and auto-MDI/MDIX
- Green IT, saves energy
- Data flow control according to IEEE802.3x for reliable data transmission
- Metal housing for desktop or wall mounting
- Supports QoS/DSCP after IEEE802.1p and IGMP snooping
- Plug-and-play, no configuration required
Product Functionalities
TP-LINK's TL-SG116 16-port Gigabit desktop switch provides an easy way to make the transition to Gigabit Ethernet. Increase the speed of your network servers and backbone connections, or make Gigabit a reality in your workplace. Thanks to the plug-and-play design, no configuration is necessary. In addition, the TL-SG116 is designed for lower power consumption. With the innovative, energy-efficient technology of the TL-SG116, you can simply save energy, making it an environmentally friendly solution for your home and office network.
Gigabit Switch
Equipped with 16 x 10/100/1000 Mbps ports, the TL-SG116 significantly expands your network capacity, allowing for the immediate transmission of large files. Power users in the home, office, workgroup, or creative production environment can now transfer large, bandwidth-intensive files faster. Transfer documents, programs, or multimedia files over the network without delay.
Switch to green with your Ethernet
You now have the option of choosing the green path if you want to upgrade to a gigabit network. The new generation TL-SG116 16-port Gigabit switch has the latest innovative, energy-efficient technology that can significantly expand your network capacity, with much less power consumption. It automatically adjusts power consumption according to link status and cable length to improve the eco-balance of your network.
Optimized Traffic
802.1p and DSCP QoS enable clean and latency-sensitive voice and video traffic. IGMP snooping optimizes the multicast data stream.
Easy To Use
The automatic functions of this Gigabit switch make installation easy thanks to plug-and-play. No configuration is required. Auto-MDI/MDIX eliminates the need for crossover cables. Auto-tune on each port detects the link speed of a network device (10, 100, or 1000 Mbps) and intelligently adjusts to ensure compatibility and optimal performance.

- 24 10/100Mbps RJ45 ports
- Innovative energy-efficient technology saves power up to 75%
- Supports MAC address self-learning and auto MDI/MDIX
- Standard 19-inch rack-mountable steel case
What This Product Does
The 24-Port 10/100Mbps Rackmount Switch TL-SF1024 provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 100Mbps network. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1024 can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network.
TP-LINK Green Technology
This new generation The 24-Port 10/100Mbps Switch TL-SF1024D features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. It also complies with the EU'S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled.
High Performance
The rack-mount size steel case design, combined with a safety-certified internal power supply, make the switch the most robust product, which is very cost-effective for a less than 16-user environment. Featuring non-blocking switching architecture, TL-SF1024 forwards and filters packets at full wire-speed for maximum throughput. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1024 work reliably.
Easy to Use
The auto features of this fast ethernet switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100 Mbps) and intelligently adjusts for compatibility and optimal performance.

- 16x RJ45 10/100/1000 Mbps
- 2x Gigabit SFP Slots
- Fanless
- 36 Gbps switching capacity
Full Gigabit ports
16 × Gigabit RJ45 ports and 2 × Gigabit SFP slots provide high-speed connectivity.
Integrated with Omada SDN.
Zero-touch provisioning (ZTP)* , centralized cloud management and intelligent monitoring.
Centralized management.
Cloud access and Omada app for extreme convenience and easy management.
Static Routing.
Helps route internal traffic for more efficient use of network resources.
Robust security strategies.
IP MAC port binding, ACL, port security, DoS defense, storm control, DHCP snooping, 802.1X, radius authentication and more.
Optimize voice and video applications.
L2 / L3 / L4 QoS and IGMP snooping.
Standalone management.
Web, CLI (Telnet, SSH), SNMP, RMON and Dual Image provide powerful management capabilities.
Package Contents:
- Power cable .
- Instruction manual
- Rack mounting kit
- Rubber feet

- Operates in accordance with the new 802.11ac standard — the new generation of WIFI
- Simultaneous dual band: up to 300 Mbit/s at 2.4 GHz and 867 Mbit/s at 5 GHz for a total data rate of 1.2 Gbit/s
- USB 2.0 port for easy access to printers, files and multimedia
- Configurable guest access
- Easy to manage with the TP-LINK Tether app
802.11Ac — next-generation WIFI
The Archer C50 from TP-LINK is equipped with the next-generation WIFI standard — the 802.11ac standard. Three times faster than the WIFI-N standard, it can achieve data rates of up to 1.2 Gbit/s. With a speed of up to 867 Mbit/s on the 5-GHz band and 300 Mbit/s on the 2.4-GHz band, the Archer C50 is ideal for trouble-free HD video streaming, online gaming and other bandwidth-intensive applications.
1.2-Gbit/s dual band connection for lag-free work and entertainment
The Archer C50 works on both the 2.4 and the 5-GHz band to guarantee incredible WIFI performance. This simultaneous operating concept gives you the flexibility of two dedicated WIFIs that you can assign to different purposes: Sending emails, chatting and surfing at 2.4 GHz and simultaneous online gaming and HD video streaming on the 5-GHz band.
Two external aerials for the best coverage
The two external aerials on the Archer C50 are able to maintain high speeds, even over long distances, which further increases coverage and improves reliability.
Multifunction USB port for sharing multimedia
You can use the multifunction USB 2.0 port to share printers, files and multimedia in your local network. The integrated FTP server also allows you to access your files via the Internet, even when on the move.

- 5× 10/100 Mbps RJ45 ports
- 4× PoE ports transfer data and power on individual cables
- Works with IEEE 802.3af compliant PDs
- Up to 250 m data and power transmitting range under Extend Mode**
- Priority Mode ensures high priority of ports 1-2 to guarantee the quality of sensitive application
- Supports PoE Power up to 41 W for all PoE ports*
- Plug and play with no configuration required
Professional Fast Ethernet Switch with 4 PoE Ports
Plug and Play, with PoE Transmission for Surveillance up to 250 m
Dedicated 4-Port PoE Switch (41 W Budget) for Numerous Applications
Compliance with the 802.3af PoE standard supports up to 15.4 W on each PoE port.
The total 41 W PoE power budget* for the 4× PoE ports opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses.
It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more.
Ideal for IP Surveillance - Up to 250 m Transmissions
With extend mode, the PoE transmission distance reaches up to 250 m** - perfect for IP Camera deployment in large areas.
Priority Video Quality Guaranteed
Quality of sensitive applications like video monitoring in critical business areas is guaranteed by offering higher priority options for ports 1-2 when one-touch Priority Mode is on.
Intelligent Power Management
When total power consumption exceeds 41 W, the intelligent power management will cut the lower priority port power.
This ensures the high priority port’s power supply and protects the device from power overload.
It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged.
Durable Metal Casing
The interior components of TL-SF1005LP are protected by high-quality metal casing to ensure a long product life.
Having passed an array of stringent reliability tests, TL-SF1005LP delivers switching performance you can depend on.
- Compact Desktop Design
- Wall-Mounting
- Fanless Design
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.