Hubs switches routers
The Best
TP-LINK TPLINK A AX12 - WLAN Router 2.4/5 GHz 1501 Mbps
61.58 EUR
AX1500 Wi-Fi 6 Router- Wi-Fi 6 technology
- Next generation speeds with 1.5 Gbps
- Connect more devices
- More reliable network coverage
- Longer battery life
- Easy to set up
- Backwards compatible
Wi-Fi 6 improves everything
Advanced Wi-Fi technology delivers faster speeds, less lag and higher capacity, allowing more simultaneous connections on your home network.
Gigabit broadband internet access
All Gigabit Ethernet ports allow you to take full advantage of your broadband speed of up to 1 Gbps. Connect your PCs, smart TVs and games consoles to one of the three Gigabit Ethernet LAN ports for fast and reliable wired connections.
WiFi coverage throughout your home
4 powerful external antennas amplify WiFi signals throughout your home. Beamforming technology detects devices and concentrates the wireless signal strength on them, especially for previously hard-to-reach sockets.
WPA3 - New level of cyber security
The latest Wi-Fi security protocol, WPA3, offers new features to improve cyber security on private networks. More secure encryption in Wi-Fi password security and improved protection against brute force attacks ensure your home Wi-Fi is protected.
Scope of delivery:
- Archer AX12 wireless router
- Power adapter
- RJ45 Ethernet cable
- Quick installation guide
Top Pick
TP-LINK TPLINK MC112CS - 10/100BaseTX>100Base single mode FXConverter
35.78 EUR
WDM fast Ethernet media converterTP-LINK MC112CS - Fibre media converter - 10Base-T, 100Base-FX, 100Base-TX - RJ-45 / SC-single mode - up to 20 km - 1310 (TX) / 1550 (RX) nm
The MC112CS is a media converter designed for converting 100BASE-FX fibre media into 100Base-TX copper media and vice versa. The MC112CS uses WDM technology and requires only one fibre-optic cable for transmitting and receiving data, reducing your cable costs by half. The MC112CS was designed according to the IEEE802.3u 10/100Base-TX standard and the 100Base-FX standard and is intended for use with single mode fibre-optic cables and the SC plug. TheMC112CS supports the long-wave (LX) laser specification for a transfer rate corresponding to the full bandwidth. It functions at 1,310 nm for transmitting data and at 1,550 nm for receiving data. This means that the other end device, which is designed to work with the MC112CS, has to function at 1550nm for transmitting data and at 1310nm for receiving data. Other media converters from TP-LINK that could work with the MC112CS include the MC111CS.
Other features of this module include: the option of using the device as a stand-alone device (no additional enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, auto-tuning in duplex mode at the transmission port and status LED on the front. The MC112CS transmits in fibre-optic long distance mode via the single mode fibre-optic cable up to a distance of 20 km.
• Auto-tuning from 10/100 Mbps and auto MDI/MDI-X at the TX port.
• Offers the switch configuration for the half-duplex/full duplex transmission mode for the FX port.
• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.
• Uses WDM and transmits and receives via a single fibre.
• Fibre-optic transmission distance of up to 20 km.
• Easily visible LEDs display the status, allowing the network to be easily monitored.
• External power supply unit.
Excellent
TP-LINK TPLINK TFC311A20 - Media converter, Gigabit Ethernet, SC, Singlemode
40.91 EUR
Gigabit WDM Media Converter- 1x Gigabit SC port
- 1x RJ45 10/100/1000 Mbps (Auto MDI/MDIX)
- 9/125 µm singlemode fiber
- UTP Cat. 5, 5e cable (max. 100m)
- 1550 nm TX / 1310 nm RX
TL-FC311A-20 is a Gigabit media converter with a Gigabit RJ-45 port and a Gigabit SC fiber port, which can convert between electrical and optical signals.
Long distance fiber optic data transmission can be applied to commercial scenarios such as parking security monitoring and wireless networks.
- Automatically negotiates half-duplex / full-duplex transmission mode .
- Adopts WDM technology and transmits and receives data on a single fiber .
- Extends the fiber distance up to 20 km
In addition, this media converter can be used as a stand-alone device (no rack required) or with TP-Link's TL-FC1420 rack for Auto-MDI / MDI-X in the TX port, where duplex mode is automatically negotiated.
Recommended
TP-LINK TPLINK TLSM321A2 - Mini GBIC, 1000Base-BX
30.78 EUR
1000Base-BX WDM Bi-Directional SFP Module- Up to 20 km transmission distance with 9/125 µm SMF (Single-Mode Fiber)
- Bidirectional WDM communication on a single fiber
- Compatible with Small Form Pluggable Multi-Source Agreement (SFP-MSA)
- Supports Digital Diagnostic Monitoring (DDM)
- Hot-swappable module design
- Work with TL-SM321B as a pair
What This Product Does
TP-Link´s TL-SM321A adopts the latest standard 1000Base-BX, transmitting over one single-mode fiber with one different wavelength going in each direction.
Paired with TL-SM321B, You can extend the network distance up to 20Km with TP-Link´s routers, switches and media converters for reliable high-speed long-distance communication.
Featured
TP-LINK TPLINK MC111CS - 10/100BaseTX>100Base single mode FXConverter
48.66 EUR
WDM fast Ethernet media converter• Works according to standards 802.3u 10/100Base-TX, 100Base-FX.
• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.
• Uses WDM and transmits and receives data via a single fibre.
The MC111CS is a media converter designed for converting 100BASE-FX fibre media into 100Base-TX copper media and vice versa. The MC111CS uses WDM and requires only one fibre-optic cable for transmitting and receiving data, reducing your cable costs by half. The MC111CS was designed according to the IEEE802.3u 10/100Base-TX standard and the 100Base-FX standard and is intended for use with single mode fibre-optic cables and the SC plug. The MC111CS supports the long-wave (LX) laser specification for a transfer rate corresponding to the full bandwidth. It functions at 1550nm for transmitting data and at 1310nm for receiving data. This means that the other end device, which is designed to work with the MC111CS, has to function at 1310nm for transmitting data and at 1550nm for receiving data. Other media converters from TP-LINK that could work with the MC111CS include the MC112CS.
Other features of this module include: the option of using the device as a stand-alone device (no additional enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, auto-tuning in duplex mode at the transmission port and status LED on the front. The MC111CS transmits in fibre-optic long distance mode via the single mode fibre-optic cable up to a distance of 20 km.
• Auto-tuning from 10/100 Mbps and auto MDI/MDI-X at the TX port.
• Offers the switch configuration for the half-duplex/full duplex transmission mode for the FX port.
• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.
• Uses WDM and transmits and receives via a single fibre.
• Fibre-optic transmission distance of up to 20 km.
• Easily visible LEDs display the status, allowing the network to be easily monitored.
• External power supply unit.
Alternative
TP-LINK TPLINK TLSF1009P - Switch, 9-Port, Fast Ethernet, PoE+
74.76 EUR
9-Port 10/100 Mbps Desktop Switch with 8-Port PoE+- 9× 10/100 Mbps RJ45 ports
- 8× PoE+ ports transfer data and power on individual cables
- Works with IEEE 802.3af/at compliant PDs
- Up to 250 m data and power transmitting range under Extend Mode**
- Priority Mode ensures high priority of ports 1-2 to guarantee the quality of sensitive application
- Supports PoE Power up to 30 W for each PoE port
- Supports PoE Power up to 65 W for 8 PoE ports*
- Plug and play with no configuration required
Professional 9-Port Switch with 8-Port PoE+ (65W Budget) for Numerous Applications
Compliance with the 802.3af/at standard supports up to 30 W on each PoE port.
The total 65 W PoE power budget* for the 8x PoE+ ports opens up a wide range of applications, such as surveillance for offices, dormitories and small businesses.
It is fully compatible with IP cameras, access points, IP Phones, computers, printers and more.
Ideal for IP Surveillance - up to 250 m Transmissions
With extend mode, the PoE transmssion distance reaches up to 250 m* - perfect for IP Camera deployment in large areas.
Ideal for IP Surveillance - Higher Performance and Security
Priority Mode and Isolation Mode make surveillance smoother an safer.
- Priority Video Quality Guaranteed
Quality of sensitive applications like video monitoring in critical business areas is guaranteed by offering higher priority options for ports 1-2 when one-touch Priority Mode is on. - One-Click Traffic separation for ports 1-8
With one click, Isolation Mode easily divides traffic ports 1-8 to avoid snooping and tampering.
This enables the switch to isolate broadcast storm, improving LAN security and data transmission.
Intelligent Power Management
When total power consumption exceeds 65 W, the intelligent power management will cutthe lower priority port power.
This ensures the high priority ports power supply and protects the device from overload.
It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged.
Durable Metal Casing
The interior components of TL-SF1009P are protected by high-quality metal casing to ensure a long product life.
Having passed an array of stringent reliability tests, TL-SF1009P delivers switching performance you can depend on.
- Compact Desktop Design
- Wall-Mounting
- Fanless Design
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports which are under extend mode will be downgraded to 10Mbps. Actual...
TP-LINK TPLINK TL-WR841N - WLAN Router 2.4 GHz 300 MBit/s
32.59 EUR
300 MBit/s WLAN router--- For logistical reasons, we cannot provide any information on the hardware revision ---
- 300 MBit/s (2.4 GHz)
- 2x external antenna
- 1x RJ45 Fast Ethernet WAN
- 4x RJ45 Fast Ethernet LAN
300 MBit/s WLAN speed
With a WLAN speed of up to 300 MBit/s, TP-LINK's TL-WR841N WLAN router provides sufficient data rate for interruption-sensitive applications such as HD video streaming or online gaming.
Access point mode
Use this mode to create a WLAN for all WLAN-capable devices in the vicinity.
Repeater mode
Extend the range of your existing WLAN to eliminate the last dead spots.
Hotspot mode
Connect the device to a mobile internet provider to have your own Wi-Fi hotspot.
Easy management with the Tether app
With the Tether app, you can manage your TL-WR841N simply and easily via any iOS and Android device. e.g: You can control which devices are allowed to connect to your network.
Scope of delivery:
- TL-WR841N WLAN router
- Power supply unit
- RJ45 Ethernet cable
- Quick start guide
TP-LINK TPLINK TL-ER7206 - Gigabit Multi WAN VPN-Router
164.98 EUR
SafeStream Gigabit Multi-WAN VPN Router- 5x RJ45 10/100/1000
- 1x SFP
- IPv6
- VPN passthrough
- VLAN
High security VPN
Supports up to 100× LAN-to-LAN IPsec, 50× OpenVPN*, 50× L2TP and 50× PPTP VPN connections.
Comprehensive security features.
Advanced firewall rules, DoS protection, IP/MAC/URL filtering and many other security features protect your network and data.
Centralized cloud management.
Integrated with the Omada SDN platform
Multi-WAN Load Balance.
Enables bundling of multiple Internet connections for combined bandwidth
The software-defined network (SDN) with cloud access.
Omada's software-defined networking integrates network devices such as access points, switches and gateways into a 100% centralized cloud management platform.
Omada enables hugely scalable networks, all centrally controlled from a single interface.
Seamlessly creating and managing WLAN and LAN connections is thus possible, an ideal solution for the hospitality industry, educational institutions, retail stores, offices and more.
Scope of supply:
- TL-ER7206
- Power cable
- Instruction
TP-LINK TPLINK TLSG1428P - Switch, 26-Port, Gigabit Ethernet, PoE+, 2x RJ45/SFP
262.31 EUR
28-Port Gigabit Easy Smart Switch with 24-Port PoE+Professional High Power 28-Port Gigabit Easy Smart Switch with 24-Port PoE+
Easy to Use, Multi-Purpose PoE Switch with Powerful Performance
- 250 W PoE Budget*
- Gigabit Ports
- Easy to Use
- VLAN
- QoS for Traffic Prioritization
- Intelligent Management
- PoE Auto Recovery
Multiple Application Scenarios
The TL-SG1428PE is fully compatible with PoE devices, such as IP cameras, access points, and IP phones.
It also works with non-PoE wired devices to provide gigabit connections, such as PCs, printers, and IPTV.
- Surveillance
Works with IP Cameras - Conference Call
Works with IP Phones - Wi-Fi Coverage
Works with Omada EAPs - Wired Connections
Works with PCs and Printers
Dedicated 24 PoE+ Ports (250 W Budget) for Numerous Applications
Compliance with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port.
The total 250 W PoE power budget* for the 24× gigabit PoE+ ports makes it has a wide range of applications, such as surveillance, offices, dormitories, and small businesses.
It is fully compatible with IP cameras, access points, IP phones, computers, printers, etc.
Value-Added Features Bring Unexpected Experiences
- QoS for a Lag-Free Experience
Ensures smooth traffic for latency-sensitive applications, such as voice and video - IGMP Snooping for Multicast Optimization
Ensures a better network experience, especially for applications like IPTV, by optimizing multimedia traffic delivery. - VLAN for Security
Helps to create a network with higher security and better overall performance by dividing the network into smaller groups
Making Management Easy
TL-SG1428PE offers network monitoring for users to observe traffic behavior.
Through its web-based user interface and management utility, the TL-SG1428PE offers a variety of useful features, including network monitoring, traffic prioritization, and enhanced QoS.
System Self-Healing with PoE Auto Recovery
The switch automatically detects and reboots the PD devices, such as cameras and APs, when they fall offline or go unresponsive, guaranteeing the stable operation of PoE-connected devices, without need for manual monitoring and restart.
Intelligent Power Management to Prevent Power Overload
Automatically cuts lower priority ports’ power to ensure high-priority ports’ power supply when the total PoE power consumption exceeds 250 W.
This protects the device from power overload operation.
Great Compatibility with PD Detection
Automatically detects the required PoE power for your device and protects...
TPLINK TL-SG1016 - TP-LINK 16-port Gigabit switch, 48.2 cm (19'') rack
89.49 EUR
• 16-port-10/100/1000 Mbps switch• Innovative, energy-saving technology for savings of up to 40%
• Supports MAC address self-learning, auto MDI/MDIX, as well as auto-tuning
• Plug-and-Play
Functionalities
The 16-port Gigabit switch TL-SG1016 simplifies your upgrade to Gigabit Ethernet. Because all 16 ports support auto MDI/MDIX, you no longer need to worry about the cable type. And the efficient energy-saving technology can achieve energy savings of up to 40%.
Gigabit switch
Equipped with 16 10/100/1000 Mbps ports, the TL-SG1016 is the easy way to expand your network and enable fast transfer of large data volumes. Ideal for small offices or work groups in which large data volumes are to be shared.
GREEN IT in your Ethernet too
You can upgrade to Gigabit with environmental awareness in mind. This new generation of the 16-port Gigabit switch TL-SG1016 features new and innovative energy-saving measures. As a result, you can expand your network and save energy at the same time. The power consumption is automatically adapted to your network utilisation and cable length. Ports at which no data are transmitted or received are automatically switched of.
Easy to use
Thanks to auto MDI/MDIX, you no longer need to distinguish between patch and crossover cables. Auto-tuning at every port automatically adjusts the connection speed for your network device (10/100/1000 Mbps) to ensure the perfect connection.
(*The savings were calculated for a standard TP-LINK switch. The actual savings may differ, depending on the conditions of use.)
• Innovative power saving technology reduces energy consumption by up to 40%
• Supports flow control according to IEEE802.3x in full-duplex mode and backpressure in half-duplex mode
• Non-blocking switching architecture for fast package processing for maximum throughput
• 32 Gbps switching capacity
• 10k jumbo frames for higher throughput of large data volumes
• Auto MDI/MDIX eliminates the need for crossover cables
• Supports MAC-Adress-Auto-Learning and Auto-Aging
• Saving and sharing the switching arrangement
• Auto-tuning guarantees smooth integration of 10 Mbps, 100 Mbps and 1000 Mbps hardware.
• Enclosure suitable for table or rack mounting
• Simple commissioning thanks to plug & play
TP-LINK TPLINK LS1005 - Switch, 5-Port, Fast Ethernet
23.34 EUR
5-Port 10/100Mbps Desktop Switch - 5× 10/100Mbos Auto-Negotiation RJ45 ports, supporting Auto-MDI/MDIX
- Green Ethernet technology saves power consumption
- IEEE 802.3X flow control provides reliable data transfer
- Plastic casing and desktop design
- Plug and play, no configuration required
- Fanless design ensures quiet operation
Easily Expand Your Network and Save Energy
5-Port 10/100 Mbps Desktop Switch
Let LiteWave Bring You Lighter Network Life
The TP-Link LiteWave Series Unmanaged Switches provide easy and affordable way to expand your wired network. They are easy to use and reliable. With these plug-and-play switches, you can expand your network connections to multiple devices instantly. With all ports support Auto-MDI/MDIX, there’s no need to worry about the type of cable to use.
Plug and Play
- Connect to Power
- Connect The Devices
- Enjoy
Go Green with Your Ethernet
The LiteWave Series also supports energy-efficient technology, helping you save power and money. Power consumption automatically adjusts according to link status and cable length, allowing you to expand your network while minimizing your carbon footprint. Save the planet and lower your energy bills - it’s a win-win!
Fanless and Desktop Design
Compact desktop design, to meet your needs in any environment.
Besides, fanless design ensures quiet operation.
Use Where You Need, However You Need
The LS1005 is fully compatible with networked devices such as computers, printers, webcams, IPTVs. It has a wide range of application scenarios and is suitable for networking in school dormitories, surveillance, homes, and small businesses.
TP-LINK TPLINK A AXE75 - Wi-Fi Router 2.4/5/6 GHz 6579 MBit/s
247.63 EUR
AXE5400 Tri-Band Gigabit Wi-Fi 6E Router- IEEE 802.11ax 6 GHz up to 2402 MBit/s
- IEEE 802.11ax/ac/n/a 5 GHz up to 2402 MBit/s
- IEEE 802.11ax/n/b/g 2.4 GHz up to 574 MBit/s
- 6x fixed high performance antennas
- 1x RJ45 Gigabit Ethernet WAN port
- 4x RJ45 Gigabit Ethernet LAN ports
- 1x USB 3.0 port
WiFi 6E: A freer and faster future
WiFi 6E introduces the brand new 6 GHz band without overlap or interference from other bands and legacy devices.
This means a congestion-free frequency that offers more bandwidth, faster speeds and lower latency.
Maximize the speeds of all your devices
The Archer AXE75 offers WiFi speeds of up to 5400 Mbps, so your devices can operate at full speed.
Enjoy smooth 4K/8K streaming, immersive AR/VR gaming, and lightning-fast downloads.
More RAM, better processing
Thanks to the advanced chipset and large RAM, you'll experience fast connections with minimal latency even under heavy load.
Every click and tap on your laptop or phone is answered faster.
Connect more - stay fast
The number of IoT devices today places greater demands on home WiFi.
The Archer AXE75 future-proofs your home network with increased capacity of up to 200+ devices.
OFDMA and other advanced technologies reduce clutter in your frequency bands and eliminate latency and jitter.
WiFi coverage throughout your home
6× high-performance antennas amplify WiFi signals throughout your home.
Beamforming technology detects devices and focuses signals on them, especially in previously hard-to-reach areas.
USB 3.0
Share files with an external drive for connected devices.
Or create your own personal cloud storage for easy, secure access from anywhere.
TP-Link OneMesh™ Flexible Whole Home WiFi Setup with Archer AXE75.
OneMesh™ is an easy way to build a mesh network with a single WiFi name for seamless whole-home coverage.
Simply connect a OneMesh™ range extender to a OneMesh™ router. No more searching for a stable connection.
TP-Link HomeShield: Advanced security for your everyday devices.
With TP-Link HomeShield, you'll enjoy advanced security features that create a safe environment that protects the data and privacy of your family and network.
WPA3: Stronger security for your network.
The latest WiFi security protocol, WPA3, offers new features to improve cybersecurity on private networks.
More secure encryption in WiFi password security and improved protection against brute force attacks keep your home network safe.
Easy to set up and use
Whether you prefer the intuitive Tether app or TP-Link's powerful web interface, you can set up your Archer AXE75 in minutes.
With the Tether app, you can manage...
TP-LINK TPLINK TLSG1005D - 5-port Gigabit desktop switch
25.76 EUR
• 5 Gigabit RJ45 ports with auto negotiation, supports Auto MDI/MDIX• Green Ethernet technology saves up to 70% energy
• IEEE 802.3x flow control ensures reliable data transmission
• Plastic enclosure for desktop or mounting on the wall
• Plug & play, no configuration necessary
Easy to operate
The automatic functions of this Gigabit switch make the installation trouble-free thanks to plug and play. No configuration necessary. Auto MDI/MDIX eliminates the necessity of crossover cables. Auto-coordination on every port recognises the connection speed of a network device (10, 100 or 1000 Mbps) and adapts it intelligently to ensure compatibility and optimum performance.
*Maximum energy savings compared to a conventional TP-LINK switch. The actual savings may vary based on the operating conditions.
Switch to green with your Ethernet
You now have the option of choosing the green path if you want to upgrade to a Gigabit network! This TL-SG1005D 5-port Gigabit desktop switch has the latest innovative, energy-efficient technology, which can significantly expand your network capacity, while at the same time consuming much less energy. It adapts the power consumption to the link status and the cable length automatically to improve your network's carbon dioxide footprint.
Powers down when ports are not active
If a computer or network device is switched off, the corresponding port of a traditional switch will continue to use a significant amount of power. The TL-SG1005D detects the link status of the individual ports automatically and reduces the power consumption of the ports that are idle, reducing power consumption by up to 80% here.
Energy allocation according to cable length
In an ideal case, shorter cables would consume less power because less energy is lost over the length of the cable. However, this is not the case for most devices, because they send the same amount of energy over the cable, regardless of which length is used.
Gigabit switch
Equipped with 5 10/100/1000Mbps ports, the TL-SG1005D expands your network capacity significantly, which allows for the immediate transfer of large files. As a result, power users can now move large, bandwidth-intensive files faster at home, in the office in a work group or in a creative production environment. Transfer documents, programs or multimedia files over the network without delay.
What this product does
The TL-SG1005D 5-port Gigabit Desktop Switch from TP-LINK provides a simple way to transition to Gigabit Ethernet. Increase the speed of your network servers and backbone connections or make Gigabit a reality in your workplace. In addition, the TL-SG1005D is designed for lower power consumption. With the innovative, energy-efficient technology of the TL-SG1005D, you can reduce energy consumption by up to 70%*, which also makes this device...
TP-LINK TPLINK MR400 - AC1200-Dualband-WLAN-4G/LTE-Router
109.12 EUR
AC1200 dual-band WLAN 4G/LTE router4G/LTE network everywhere
The Archer MR400 supports the LTE/4G cellular standard with up to 150 Mbps download speeds for uninterrupted video streaming and online gaming. It is also compatible with FDD-LTE and TDD-LTE, so that almost all operators in the world can be supported.
- Supports the 4G/LTE mobile standard with download rates of up to 150 Mbps, connections for more than 65 devices simultaneously
- Simultaneous dual band according to 802.11ac: up to 300 Mbps on 2.4 GHz and 867 Mbps on 5 GHz
- No configuration required - simply insert SIM card and put LTE hotspot into operation
- Two detachable antennas for a stable and efficient connection
- Freely configurable LAN/WAN port for alternative connection via cable or fiber optic modem
Plug and play!
No configuration required
With an internal LTE modem and SIM card slot, all you need to do is insert a SIM card and switch on the Archer MR400. A fast, stable WLAN connection is available almost everywhere.
WLAN where you need it
The Archer MR400 takes you into a new dimension of convenience and versatility. Nowadays it can be very important to be able to use a powerful WLAN at any time. The Archer MR400 is the perfect solution, whether you're at home or on the move.
Connections for more than 64 devices simultaneously
The Archer MR400 can provide lag-free connections for more than 32 devices, e.g. cell phone, laptop and PC. With its LAN/WAN port, the TL-MR6400 offers an alternative broadband connection option.
Simple operation via the Tether app
With the Tether app, you can manage the Archer MR400 simply and easily via any iOS or Android device.
TP-LINK TPLINK TL-WR840N - Wi-Fi router, 2.4 GHz, 300 Mbit/s
28.55 EUR
300-Mbit/s Wi-Fi router - Wi-Fi speeds of up to 300 Mbit/s, making this router ideal for basic Internet applications
- Two external antennas ensure optimal Wi-Fi coverage and range
- Easy Wi-Fi security encryption by pressing the WPS button
- The IP-based bandwidth control allows optimum allocation of power capacity per user
Wi-Fi speeds of up to 300 Mbit/s
With speeds of up to 300 Mbit/s, the TP-LINK TL-WR840N Wi-Fi router delivers the bandwidth required for a wide range of basic Internet applications such as emailing, chatting and surfing. Equipped with two external antennas for optimal range and four 10/100-Mbit/s LAN ports, this router is ideal for users seeking excellent value for money.
External antennas for optimal coverage
The two external antennas on the TL-WR840N can maintain high speeds, even over long distances. This further increases coverage and provides an even more reliable connection, giving you a stable Wi-Fi signal wherever you are in your home.
CCA technology for a stable Wi-Fi signal
The clear channel assessment (CCA) technology automatically selects the best available channel to give you higher performance and a more stable connection.
TP-LINK TPLINK TL-SG2218 - Switch, 16-Port, Gigabit Ethernet, SFP
144.27 EUR
JetStream 16-Port Gigabit Smart Switch with 2 SFP Slots- 16x RJ45 10/100/1000 Mbps
- 2x Gigabit SFP Slots
- Fanless
- 36 Gbps switching capacity
Full Gigabit ports
16 × Gigabit RJ45 ports and 2 × Gigabit SFP slots provide high-speed connectivity.
Integrated with Omada SDN.
Zero-touch provisioning (ZTP)* , centralized cloud management and intelligent monitoring.
Centralized management.
Cloud access and Omada app for extreme convenience and easy management.
Static Routing.
Helps route internal traffic for more efficient use of network resources.
Robust security strategies.
IP MAC port binding, ACL, port security, DoS defense, storm control, DHCP snooping, 802.1X, radius authentication and more.
Optimize voice and video applications.
L2 / L3 / L4 QoS and IGMP snooping.
Standalone management.
Web, CLI (Telnet, SSH), SNMP, RMON and Dual Image provide powerful management capabilities.
Package Contents:
- Power cable .
- Instruction manual
- Rack mounting kit
- Rubber feet
TP-LINK TPLINK TLSG1218M - Switch, 20-Port, Gigabit Ethernet, 2x SFP/RJ45
227 EUR
JetStream 16-Port Gigabit Easy Smart PoE+ Switch with 2 SFP Slots- 16 10/100/1000Mbps RJ45 PoE+ Ports Switch with 2 SFP Slots
- PoE power budget is up to 192W, making it ideal for small to medium business surveillance systems
- Port Priority is able to guarantee the quality of sensitive application like video monitor
- Intelligent power management can protect the switch from overload
- QoS is for smooth internet-surfing experience and IGMP Snooping is capable of optimizing traffic for IPTV.
Ideal for Surveillance
TL-SG1218MPE complies with the 802.3af/at PoE+ standard, supporting up to 30W power supply on each PoE port.
The total high PoE power budget is up to 192W for the 16 PoE ports, making it ideal for small to medium business surveillance systems.
Intelligent Power Management
When total power consumption excels 192W, the intelligent power management will cut the lower priority port power off to ensure the high priority port’s power supply and protect the device from power overload operation.
QoS For Smooth Online Experience
Administrators can designate the priority of traffic based on QoS, for example, to ensure that voice and video applications remain clear and lag-free.
IGMP Snooping Traffic Optimization for IPTV
IGMP Snooping optimizes multimedia traffic delivery to ensure a better network experience especially for applications like IPTV.
Making Management Easy
TL-SG1218MPE offers network monitoring for users to observe traffic behavior.
Through its web-based user interface and management utility, the TL-SG1218MPE offers a variety of useful features, including network monitoring, traffic prioritization, and enhanced QoS.
TP-LINK TPLINK SF1008LP - Switch, 8-Port, Fast Ethernet, PoE
60.59 EUR
8-Port 10/100Mbps Desktop Switch with 4-Port PoE- 8× 10/100 Mbps RJ45 ports
- 4× PoE ports transfer data and power on individual cables
- Works with IEEE 802.3af compliant PDs
- Up to 250m data and power transmitting range under Extend Mode**
- Priority Mode ensures high priority of ports 1-2 to guarantee the quality of sensitive application
- Supports PoE Power up to 41 W for all PoE ports*
- Plug and play with no configuration required
Professional Fast Ethernet Switch with 4 PoE Ports
Plug and Play, with PoE Transmission for Surveillance up to 250 m
Dedicated 4-Port PoE Switch (41 W Budget) for Numerous Applications
Compliance with the 802.3af PoE standard supports up to 15.4 W on each PoE port.
The total 41 W PoE power budget* for the 4× PoE ports opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses.
It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more.
Ideal for IP Surveillance - Up to 250 m Transmissions
With extend mode, the PoE transmission distance reaches up to 250 m**—perfect for IP Camera deployment in large areas.
Priority Video - Quality Guaranteed
Quality of sensitive applications like video monitoring in critical business areas is guaranteed by offering higher priority options for ports 1-2 when one-touch Priority Mode is on.
Intelligent Power Management
When total power consumption exceeds 41 W, the intelligent power management will cut the lower priority port power.
This ensures the high priority port’s power supply and protects the device from power overload.
It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged.
Durable Metal Casing
The interior components of TL-SF1008LP are protected by high-quality metal casing to ensure a long product life.
Having passed an array of stringent reliability tests, TL-SF1008LP delivers switching performance you can depend on.
- Compact Desktop Design
- Wall-Mounting
- Fanless Design
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.
TP-LINK TPLINK UH400 - USB 3.0 4-Port Portable Hub
25.4 EUR
USB 3.0 ports offer transfer speeds of up to 5Gbps, 10 times faster than standard USB 2.0The 4 data transfer ports mean you don't have to switch between devices
The UH400 supports all USB devices including USB drives, mice, printers or any other USB device you want to run simultaneously. USB 3.0 ports offer transfer speeds of up to 5Gbps, 10 times faster than the USB 2.0 standard.
High Speed Data Transfer
Equipped with USB 3.0 ports, UH400 provides a data transfer rate of up to 5Gbps, 10 times faster than USB 2.0.
Expand Your USB Ports
UH400 adds 4 additional USB ports to your PC, making it unnecessary to switch between devices.
Compact and Portable Design
Compact design with a retractable cable makes it an ideal USB HUB on the go.
Safe and Reliable
UH400’s multiple protections avoid any potential harm to your connected devices no matter you’re transferring data or charging devices.
TP-LINK TPLINK SF1024 - 24-Port 10/100Mbps Rackmount Switch
71.96 EUR
- 24 10/100Mbps RJ45 ports
- Innovative energy-efficient technology saves power up to 75%
- Supports MAC address self-learning and auto MDI/MDIX
- Standard 19-inch rack-mountable steel case
What This Product Does
The 24-Port 10/100Mbps Rackmount Switch TL-SF1024 provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 100Mbps network. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1024 can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network.
TP-LINK Green Technology
This new generation The 24-Port 10/100Mbps Switch TL-SF1024D features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. It also complies with the EU'S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled.
High Performance
The rack-mount size steel case design, combined with a safety-certified internal power supply, make the switch the most robust product, which is very cost-effective for a less than 16-user environment. Featuring non-blocking switching architecture, TL-SF1024 forwards and filters packets at full wire-speed for maximum throughput. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1024 work reliably.
Easy to Use
The auto features of this fast ethernet switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100 Mbps) and intelligently adjusts for compatibility and optimal performance.
TP-LINK TPLINK M7000 - WLAN Hotspot 4G LTE 150 MBit/s mobil
61.62 EUR
Mobile 4G/LTE WLAN router- Surf simultaneously for up to 10 devices
- The 2000mAh battery provides energy for up to 8 hours of mains-independent operation
- Supports the 4G FDD/TDD LTE mobile phone standard, compatible with mobile phone networks in most countries and regions
Whether it's smooth HD streaming, downloads in seconds or online gaming, everything is possible.
WLAN connection for up to 10 devices
With TP-Links 4G/LTE M7000 WLAN Router, you can use the 3G/4G mobile connection with up to 10 wireless devices such as tablets, smartphones, laptops, etc.
Up to 8 hours of unlimited mobility
With its powerful 2000mAh battery, the M7000 can be operated for up to 8 hours without mains power.
The M7450 is perfect for private or business travel, outdoor activities and much more.
* Actual battery life may vary depending on usage and environment
Installation within seconds
The M7000 has a compact and user-friendly design.
All you need to do is insert the SIM card and press the power button, and the high-speed 4G hotspot is ready for use in half a minute.
Easy management with the tpMiFi app
The tpMiFi app allows you to easily manage your M7000 from any iOS device.
Set data limits, monitor which devices can connect to your network and send messages.
TP-LINK TPLINK ER7212PC - VPN Router, Gigabit Ethernet, PoE+
216.66 EUR
Omada 3-in-1 Gigabit VPN Router- 2x Gigabit SFP WAN/LAN ports
- 1x RJ45 Gigabit WAN port
- 1x RJ45 Gigabit LAN/WAN port
- 8x RJ45 Gigabit LAN ports (PoE+)
- 1 GB DDR3 DRAM
- 20 IPSec VPN tunnels
3-in-1 router, more than a router
The 3-in-1 ER7212PC is a complete solution for home networks and small businesses.
With a single compact box, users can replace their router, hardware controller and PoE+ switch setup.
There is no need to manually configure various network devices one by one, you can perform unified deployment through ER7212PC.
All you need is one device.
Integrated PoE+ switch
Dedicated 8× PoE+ ports (110W total PoE power budget*) for PoE-supported devices such as access points, IP cameras and IP phones, reducing infrastructure costs for small businesses.
Embedded Omada SDN Controller
With the embedded Omada SDN controller, you don't need to configure additional management devices with ER7212PC.
You only need one device to manage and upgrade other devices in bulk.
Up to four WAN Gigabit ports for optimal bandwidth utilization.
Equipped with multiple ports, the ER7212PC meets various requirements for Internet access through one device.
The multi-WAN load balancing function distributes data streams according to the bandwidth share of each WAN port to increase the utilization of multi-line broadband.
Easy installation, quiet heat dissipation
A clean, well-organized and quiet network environment is at your disposal.
The compact and minimalist design makes it suitable for your configuration in different rooms, whether it is the corner of an office desk or the ceiling of a store.
The fanless design provides silent heat dissipation to your stores or offices.
High-security and high-performance VPN
The ER7212PC supports pass-through traffic and multiple VPN protocols, including OpenVPN, IPSec, PPTP and L2TP in client/server mode.
One-click Auto-IPSec VPN simplifies VPN configuration and eases network management and deployment.
Powerful firewall
Advanced firewall policies protect your network and data.
IP/MAC/URL/keyword filtering
Forcefully prevent viruses and intruder attacks.
Convenient VLAN support
Create virtual network segments for enhanced security and simplified network management.
IP MAC binding
Reserve static IP assignment for endpoints to protect against ARP attacks and spoofing.
DoS defense
Automatically detects and blocks Denial of Service (DoS) attacks such as TCP/UDP/ICMP flooding, Ping of Death, and other similar threats.
One-click ALG activation
One-click ALG activation for applications such as FTP, H323, SIP, IPSec, and PPTP.
TP-LINK TPLINK TL-SG3210 - Switch, 10-Port, Gigabit Ethernet, SFP
110.57 EUR
JetStream 8-Port Gigabit L2+ Managed Switch with 2 SFP Slots- 8x RJ45 Gigabit Ethernet
- 2x Gigabit SFP Slots
- 1x RJ45 console port
- 1x Micro-USB Console Port
- Fanless
- 20 GBit/s switching capacity
Software Defined Networking (SDN) with cloud access
Omada's Software Defined Networking (SDN) platform integrates network devices, including access points, switches and gateways, and provides 100% centralized cloud management.
Omada creates a highly scalable network controlled from a single interface.
Seamless wireless and wired connections are centrally controlled and are ideal for use in areas such as hotels and restaurants, education, retail, offices and more.
Advanced QoS
Voice and video traffic can be prioritized based on IP address, MAC address, TCP port number, UDP port number and more.
Quality of Service (QoS) keeps voice and video services running smoothly, even when bandwidth is tight.
IPv6 support
IPv6 features such as dual IPv4 / IPv6 stacking, MLD snooping, IPv6 ACL, DHCPv6 snooping, IPv6 interface, Path Maximum Transmission Unit (PMTU) discovery, and IPv6 Neighbor Discover ensure your network is ready for the Next Generation Network (NGN) without upgrading your hardware.
Package contents:
- TL-SG3210 Switch
- Power cord
- Manual
- Rackmount Kit
- Rubber feet
TP-LINK TPLINK TLSG105E - 5-port Gigabit Easy Smart Switch, metal enclosure
33.98 EUR
5-port Gigabit Easy Smart Switch• 5 gigabit RJ45 ports with auto negotiation and auto MDI/MDIX
• Network monitoring, traffic prioritisation and simple VLAN applications
• Energy-efficient Green IT reduces energy consumption by up to 75%*
• Plug & play, no configuration necessary
• Central management of all your Easy Smart switches via the Easy Smart Configuration Utility
The TL-SG105E 5-port Gigabit Easy Smart Switch from TP-LINK provides a simple way to transition to managed switches. Thanks to port mirroring, loop detection and cable diagnostics, data traffic is easy to monitor. The administrator port-/tag-based QoS is available to optimise data transmission. Port-/tag-/MTU-based VLAN also increases security by segmenting the network.
Furthermore, innovative green IT reduces the energy consumption of the TL-SG105E by up to 75%*. As a result, this environmentally friendly solution for your home and office networks not only helps you save energy, but also helps lower costs.
* The actual values may vary depending on network and environmental factors.
Simple but effective management
TP-LINK's TL-SG105E offers your various options for network monitoring. By means of port mirroring, loopback detection and cable diagnostics, you can detect connection problems in your network and even locate them. Furthermore, you can prioritise the data traffic using port priority and 802.1p priority to ensure that VoIP and video streaming are always fluid and free from delays.
To further improve security and performance, the TL-SG105E supports MTU-VLAN, port-based VLAN and 802.1q-based VLAN. With its basic management functions, the Easy Smart Switch therefore occupies a level above the unmanaged software switches, and offers great added value at a similar price.
Switch your network to green
The TL-SG105E 5-port Gigabit Easy Smart Switch has the latest innovative, energy-efficient technology, which can expand your network capacity which simultaneously using significantly less energy. It adapts the power consumption to the link status and the cable length automatically to improve your network's ecological balance sheet.
Switching off inactive ports
If a computer or network device is switched off, the corresponding port of a traditional switch will continue to use a significant amount of power. The TL-SG105E detects the link status of the individual ports automatically and reduces the power consumption of ports that are idle.
Energy allocation according to cable length
In an ideal situation, shorter cables consume less power, because less energy is lost over short distances. However, for most conventional devices maximum output is used for every cable length. TP-LINK's green IT detects the length of the connected Ethernet cable and adjusts the transmission output accordingly, instead of keeping the energy level...
TP-LINK TPLINK TLSG1008M - Switch, 8-Port, Gigabit Ethernet, PoE
128.81 EUR
8-Port Gigabit Desktop/Rackmount Switch with 8-Port PoE+ TL-SG1008MP- 8 10/100/1000Mbps RJ45 ports
- Equipped with 8 PoE+ supported ports to transfer data and power over a single cable
- Works with IEEE 802.3af/at compliant devices, expanding home and office networks
- Innovative energy-efficient technology reduces power consumption by up to 75%
- Supports PoE+ standard with total power budget of 126W and up to 30W per port
- Plug and play design, no configuration required
The TL-SG1008MP is an 8-Port Gigabit Desktop/Rack mountable Switch with all 8 ports supporting the PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable. With a total power budget of 126W, up to 30W per port, TL-SG1008MP can power more high-powered devices such as wireless Access Points (APs), IP Cameras or IP Phones. Moreover, with innovative energy-efficient technology, the TL-SG1008MP can save up to 75% of the power consumption, making it an eco-friendly solution for your business network.
How This Product Works
All 8 ports of TL-SG1008MP support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). In this situation, the electrical power is transmitted along with data in a single cable, allowing you to expand your network where there are no electrical cables or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones.
TP-LINK TPLINK TL-SG2008 - Switch, 8-Port, Gigabit Ethernet
104.99 EUR
JetStream 8 Port Gigabit Smart Switch- 8x RJ45 10/100/1000 Mbps (Auto-negotiation/Auto MDI/MDIX)
- Fanless
- 16 Gbps switching capacity
All Gigabit Ports
Full gigabit bandwidth upload and download at the same time on all 8 gigabit ports enable high-speed connections
Integrated into Omada SDN.
Zero-Touch Provisioning(ZTP), centralized cloud management and intelligent monitoring.
Centralized Management.
Cloud access and the Omada app enable very convenient and easy management.
Solid security strategies.
802.1Q VLAN, ACL, port security, storm control and more.
Optimized voice and video applications.
L2/L3/L4 QoS and IGMP Snooping.
Versatile management.
WEB, CLI or controller management, SNMP and RMON enable a variety of management options.
Package Contents:
- TL-SG2008
- Power supply
- Installation manual
- Rubber feet
TP-LINK TPLINK UH700 - 7-port USB 3.0 hub including power supply unit
46.08 EUR
• The USB 3.0 ports offer speeds up to 5 Gbps, 10 times as fast as USB 2.0• Having 7 slots saves you having to constantly disconnect and reconnect your USB devices
The USB hub UH700 is ideal for adding additional USB ports to your computer. This allows you to connect up to 7 devices, such as USB data carriers, USB mice or USB printers at the same time, without having to constantly disconnect and reconnect your devices. The USB 3.0 ports support data transfer rates of up to 5 Gbps and are thus 10 times as fast as USB 2.0.
Fast data transfers
Thanks to its USB 3.0 ports, the UH700 is 10 times as fast as USB 2.0.
Expansion of your USB ports
The UH700 offers you 7 additional USB ports so that you do not have to constantly connect and disconnect the USB devices on your PC.
Secure and reliable
The UH700 has multiple support mechanisms to prevent damage to your connected devices.
TP-LINK TPLINK TL-SG116 - Switch, 16-Port, Gigabit Ethernet
85.56 EUR
16-port Gigabit desktop switch TL-SG116- 16 Gigabit RJ45 ports with auto-tune and auto-MDI/MDIX
- Green IT, saves energy
- Data flow control according to IEEE802.3x for reliable data transmission
- Metal housing for desktop or wall mounting
- Supports QoS/DSCP after IEEE802.1p and IGMP snooping
- Plug-and-play, no configuration required
Product Functionalities
TP-LINK's TL-SG116 16-port Gigabit desktop switch provides an easy way to make the transition to Gigabit Ethernet. Increase the speed of your network servers and backbone connections, or make Gigabit a reality in your workplace. Thanks to the plug-and-play design, no configuration is necessary. In addition, the TL-SG116 is designed for lower power consumption. With the innovative, energy-efficient technology of the TL-SG116, you can simply save energy, making it an environmentally friendly solution for your home and office network.
Gigabit Switch
Equipped with 16 x 10/100/1000 Mbps ports, the TL-SG116 significantly expands your network capacity, allowing for the immediate transmission of large files. Power users in the home, office, workgroup, or creative production environment can now transfer large, bandwidth-intensive files faster. Transfer documents, programs, or multimedia files over the network without delay.
Switch to green with your Ethernet
You now have the option of choosing the green path if you want to upgrade to a gigabit network. The new generation TL-SG116 16-port Gigabit switch has the latest innovative, energy-efficient technology that can significantly expand your network capacity, with much less power consumption. It automatically adjusts power consumption according to link status and cable length to improve the eco-balance of your network.
Optimized Traffic
802.1p and DSCP QoS enable clean and latency-sensitive voice and video traffic. IGMP snooping optimizes the multicast data stream.
Easy To Use
The automatic functions of this Gigabit switch make installation easy thanks to plug-and-play. No configuration is required. Auto-MDI/MDIX eliminates the need for crossover cables. Auto-tune on each port detects the link speed of a network device (10, 100, or 1000 Mbps) and intelligently adjusts to ensure compatibility and optimal performance.
TP-LINK TPLINK TLSF1008P - 8-port Fast Ethernet desktop (4xPoE) switch
61.62 EUR
8-port 10/100 M desktop PoE switch• Four PoE ports that can transmit data and power via a single cable
• Works with IEEE802.3af-compliant PDs, enlarges the home and office network
• Requires no configuration
Product functionality
The TL-SF1008P 8-port 10/100 desktop switch allows for a seamless network connection. It combines a 100-Mbps Fast Ethernet with 10-Mbps Ethernet network capabilities.
How this product works
4 of the 8 auto-coordination RJ45 ports (port 1 to port 4) of the switch support the power-over-Ethernet (PoE) function. These PoE ports can recognise PoE devices automatically and supply IEEE802.3af-powered devices (PDs). In this situation the electrical power is transported together with the data in a single cable. The device makes it possible to expand your network where there are no power lines or outlets and where you would like to operate devices such as access points, IP cameras or IP phones, etc.
Behaviour in case of overloading
The TL-SF1008P has a priority* function which helps protect the system if the system performance is overloaded. If the entire power consumption of the PoE PDs is greater than or equal to 53 W, priorities are assigned under the PoE ports. The system then decides on the power distribution and the energy supply on the port with the lowest priority is switched off.
Port-priority function
*Priority (port 1> port 2> port 3> port 4): This function is there to protect the system if the PoE performance is overloaded. If, for example, ports 1, 2 and 4 each use 15.4 W (maximum power per port 15.4 W), the total power is 46.2 W (in this case, the PoE max LED is red). If an additional PD with 10 W is connected to port 3, the system port 4 will be switched off to prevent damage. This means that ports 1 and 2 can each consume 15.4 W, while port 3 can consume 10 W. No power is delivered on port 4.
Easy to operate
The TL-SF1008P is easy to install and use. It does not require any configuration. With its desktop design, outstanding performance and quality, the TP-LINK TL-SF1008P 8-port 10/100 desktop PoE switch is an excellent choice for expanding your home or office network.
TP-LINK TPLINK SF1005LP - Switch, 5-Port, Fast Ethernet, PoE
77.08 EUR
5-Port 10/100Mbps Desktop Switch with 4-Port PoE- 5× 10/100 Mbps RJ45 ports
- 4× PoE ports transfer data and power on individual cables
- Works with IEEE 802.3af compliant PDs
- Up to 250 m data and power transmitting range under Extend Mode**
- Priority Mode ensures high priority of ports 1-2 to guarantee the quality of sensitive application
- Supports PoE Power up to 41 W for all PoE ports*
- Plug and play with no configuration required
Professional Fast Ethernet Switch with 4 PoE Ports
Plug and Play, with PoE Transmission for Surveillance up to 250 m
Dedicated 4-Port PoE Switch (41 W Budget) for Numerous Applications
Compliance with the 802.3af PoE standard supports up to 15.4 W on each PoE port.
The total 41 W PoE power budget* for the 4× PoE ports opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses.
It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more.
Ideal for IP Surveillance - Up to 250 m Transmissions
With extend mode, the PoE transmission distance reaches up to 250 m** - perfect for IP Camera deployment in large areas.
Priority Video Quality Guaranteed
Quality of sensitive applications like video monitoring in critical business areas is guaranteed by offering higher priority options for ports 1-2 when one-touch Priority Mode is on.
Intelligent Power Management
When total power consumption exceeds 41 W, the intelligent power management will cut the lower priority port power.
This ensures the high priority port’s power supply and protects the device from power overload.
It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged.
Durable Metal Casing
The interior components of TL-SF1005LP are protected by high-quality metal casing to ensure a long product life.
Having passed an array of stringent reliability tests, TL-SF1005LP delivers switching performance you can depend on.
- Compact Desktop Design
- Wall-Mounting
- Fanless Design
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.
TP-LINK TPLINK ARC VR300 - WLAN Router 2.4/5 GHz VDSL2/ADSL2+ 1167 MBit/s (Annex A)
63.65 EUR
AC1200 Wireless VDSL/ADSL Modem RouterParental Controls
manage responsible internet access for your children
Guest Network
provides separate access for guests while securing the home network
Firewall Security
supports DoS, SPI Firewall, IP Addressing/Domain Filter, IP/MAC Address Binding
Quality of Service
prioritizes network traffic by device or application
IPTV IGMP Proxy/Snooping
supports Bridge and Tag VLAN for smooth IPTV application
IPv6
compatible with IPv6 (Internet Protocol version 6)
Multilingual Interface
provides hassle-free configuration in six languages (EN/DE/IT/TR/RU/PO)
Upgrade Internet, Upgrade Home Entertainment
AC1200 Wireless VDSL/ADSL Modem Router Archer VR300
Upgrade AC Wi-Fi to Enjoy Wireless Entertainment
As a powerful DSL modem router, the Archer VR300 makes full use of its Wi-Fi abilities by providing combined dual band Wi-Fi speeds of up to 1200Mbps.
300Mbps on 2.4GHz is perfect for everyday surfing and emailing, while 867Mbps on 5GHz provides lag-free HD streaming and gaming.
Superfast VDSL Broadband
The latest VDSL2 technology allows the Archer VR300 to deliver impressive VDSL broadband speeds of up to 100Mbps, which is almost five times faster than ADSL2+.
The Archer VR300 serves as a DSL modem and wireless router, combining two devices in one.
The integrated DSL port supports all standard DSL connections, including VDSL2, ADSL2+, ADSL2, and ADSL.
External Antennas Greatly Expand Wireless Coverage
Four external antennas with advanced connection technology allow you to maintain impressive speeds, even over greater distances.
This means that you can enjoy incredible wireless coverage and reliability in any part of your large home or office.
Remote Control
With TP-Link Tether App and DDNS, you can control your home network wherever you are.
Safe, Family-Friendly Surfing
Parental Controls manage when and how connected devices can access the internet.
Guest Network keep your main network secure while creating a separate network for guests and visitors.
6kV Lightning Protection
6KV Lightning Protection provides shields against electrical damage caused by thunderstorms so that you can enjoy your life even in bad weather.
Package Contents
- External Splitter
- RJ11 DSL Cable
- RJ45 Ethernet Cable
- Power Adapter
- Quick Installation Guide
TP-LINK TPLINK MC220L - 1000Base-SX/LX/LH > 1000Base-T converter
30.98 EUR
Gigabit Ethernet media converter• Complies with standards IEEE 802.3ab and IEEE 802.3z.
• The FX-port supports Hot-Swap
• Fibre-optic transmission distance of up to 0.55 km for the multimode fibre and 10 km for the single mode fibre.
The MC220L is a media converter designed for converting 1000BASE-SX fibre media into 1000Base-TX copper media and vice versa. The MC220L was designed according to the IEEE802.3ab 1000Base-T standard and the IEEE802.3z 1000Base-SX/LX/LH standard and is intended for use with multimode fibre-optic cables and the SC plug. It functions at 850nm for both transmitting and receiving data when using multimode fibre-optics and at 1310nm for both transmitting and receiving data when using a single mode fibre-optic cable.
Other features of this module include: the option of using the device as a stand-alone device (no enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, and status LED on the front. The MC220L transmits in fibre-optic long distance mode via the multimode fibre-optic cable up to a distance of 550 m and via a single mode fibre-optic cable up to a distance of 10 km.
- Standards and protocols: IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
- Basic function: Full duplex flow control IEEE 802.3x
Increases the fibre range to 0.5 km if a 50/125 µm fibre is used
- Ports: 1-Gigabit SFP-port
1000M RJ45 port (auto MDI/MDIX)
- Network media 1000BASE-T: Category 5 UTP cables, 5e (maximum 100 m)
EIA/TIA-568 100Ohm STP (maximum 100 m)
- Network media 1000BASE-FX: Multimode/single mode fibres
-LED display: PWR, LINK, RX
- Dimensions (LxWxH) 94.5 mm*73.0 mm*27.0 mm
Power supply: External voltage adapter
TP-LINK TPLINK LS108G - Switch, 8-port, Gigabit Ethernet
44.32 EUR
- 8x 10/100/1000 Mbit/s auto-negotiation RJ45 ports supports auto MDI/MDIX
- Green Ethernet technology reduces power consumption after use
- IEEE 802.3x for reliable data stream control
- Metal enclosure for easy mounting on a table or wall
- Supports 802.1p/DSCP QoS function
- Plug and play - no configuration required
Expands your network
The TP-Link 8-port 10/100/1000 Mbit/s desktop switch from the new TP-Link LiteWave series offers an easy way to expand your network. The plug-and-play design makes the product easy to use. No configuration is required. Auto MDI/MDIX also eliminates the need for crossover cables.
TP-LINK TPLINK LS1008G - Switch, 8-Port, Gigabit Ethernet
27.51 EUR
8-Port 10/100/1000Mbps Desktop Switch LS1008G- 8× 10/100/1000Mbos Auto-Negotiation RJ45 port, supporting Auto-MDI/MDIX
- Green Ethernet technology saves power
- IEEE 802.3X flow control provides reliable data transfer
- Plastic casing, desktop or wall-mounting design
- Plug and play, no configuration needed
- Fanless design ensures quiet operation
Let LiteWave Bring You Lighter Network Life
The TP-Link LiteWave Series Unmanaged Switches provide easy and affordable way to expand your wired network. They are easy to use and reliable. With these plug-and-play switches, you can expand your network connections to multiple devices instantly. With all ports support Auto-MDI/MDIX, there’s no need to worry about the type of cable to use.
Go Green with Your Ethernet
The LiteWave Series also supports energy-efficient technology, helping you save power and money. Power consumption automatically adjusts according to link status and cable length, allowing you to expand your network while minimizing your carbon footprint. Save the planet and lower your energy bills - it’s a win-win!
Gigabit Ports For Faster Speeds
Increase the speed of your network with the LS1008G 8-port Gigabit desktop switch. Non-blocking, 8× 10/100/1000Mbps ports enable instant transferring of large, bandwidth intensive files without interference.
Use Where You Need, However You Need
The LS1008G is fully compatible with networked devices such as computers, printers, webcams, IPTVs. It has a wide range of application scenarios and is suitable for networking in school dormitories, surveillance, homes, and small businesses.
TP-LINK TPLINK TLSL2428P - Switch, 28-Port, Fast Ethernet, PoE+, RJ45/SFP
293.15 EUR
JetStream 24-Port 10/100Mbps + 4-Port Gigabit Smart Switch with 24-Port PoE+- 24x RJ45 Fast Ethernet Ports
- 2x RJ45 Gigabit Ethernet Ports
- 2x Combo Gigabit Uplink RJ45/SFP Ports
- 2x fans
- 250 W PoE total power budget
- 12.8 GBit/s switching capacity
Dedicated 24 PoE + ports (250 W budget) for multiple applications
Compliance with 802.3af / at PoE + standard supports up to 30 W on each PoE port.
The total PoE + budget of 250 W PoE * for the PoE + ports with 24 × 10/100 Mbit / s provides a wide range of applications, such as surveillance, offices, dormitories and small businesses.
It is fully compatible with IP cameras, access points, IP phones, computers, printers and so on.
Software Defined Networking (SDN) with cloud access.
Omada's Software Defined Networking (SDN) platform integrates network devices, including access points, switches and gateways, and provides 100% centralized cloud management.
Omada creates a highly scalable network controlled from a single interface.
Seamless wireless and wired connectivity is provided, ideal for use in hospitality, education, retail, offices and more.
Package contents:
- TL-SL2428P
- Power cord
- Installation Guide
- Rackmount Kit
- Rubber feet
TP-LINK TPLINK SF1016D - Switch, 16-Port, Fast Ethernet
40.13 EUR
- 16 RJ45 Mbps auto-tune and auto-MDI/MDIX ports
- Green IT saves up to 70% energy
- IEEE802.3x flow control ensures reliable data transmission
- Plastic housing for table-top or wall mounting
- Plug-and-play, no configuration required
Product Functionalities
The TL-SF1016D Fast Ethernet Switch is designed for SOHO (small Office / Home Office) or workgroup users. All 16 ports support auto MDI/MDIX. Don't worry about the type of cable, just plug it in and go. In addition, with its innovative, energy-efficient technology, the TL-SF1016D can save up to 70% of the energy consumption and 70% of the packaging material can be recycled, making it an environmentally friendly solution for your business network.
High Performance
The TL-SF1016D Fast Ethernet switch provides 16 RJ45 Mbps auto-tuning ports. All ports support auto MDI/MDIX, which eliminates the need for crossover cables or uplink ports. With its non-blocking switching architecture, the TL-SF1016D filters and forwards incoming packets at full cable speed for maximum throughput. Support for 9k jumbo frames significantly improves performance when transferring large files. And the IEEE802.3x flow control for full duplex mode and the backpressure for half duplex mode relieve data jams and let the TL-SF1016D work reliably.
Green IT from TP-LINK
This new generation Fast Ethernet switch TL-SF1016D features the latest innovative energy-efficient technology that significantly increases your network capacity with much less power. It automatically adjusts power consumption based on link status and cable length to improve the carbon footprint of your network.
It also complies with EU RoHS, which prohibits the use of certain hazardous substances. In addition, 70% of the packaging material can be recycled.
Easy to use
The automatic functions of this Gigabit switch make installation easy thanks to plug-and-play. No configuration is required. Auto-MDI/MDIX eliminates the need for crossover cables. Auto-tune on each port detects the link speed of a network device (10 or 100 Mbps) and intelligently adjusts to ensure compatibility and optimal performance.