Network accessories
The Best
DELOCK 86186 - Mini GBIC (SFP), LC, 1 Gigabit/s, 1000 Base-SX
30.57 EUR
Delock transceiver 1000Base-SX MM 850 nm SFP moduleThis Delock SFP module can be used to extend a Gigabit switch with one free SFF port by one optical fibre connection.
Technical data
• Multi-mode fibres, 850 nm wavelength
• Up to 550 m with 50/125 µm fibres
• LC duplex connector for fibre optics
• Data transfer rate up to 1.25 Gbit/s
• Compatible with SFP MSA and SFF-8472
• Operating temperature: 0 to +70°C
System requirements
• Switch with one free SFF slot
Package contents
• SFP module
Top Pick
STARTECH.COM ST JD118BST - SFP Module - HP JD118B Compatible
77.12 EUR
1000 Mbps (1 Gbps), Multi Mode Fiber, LC, 550 m (1804 ft)- 100% compatibility with HP JD118B guaranteed
- StarTech.com SFP modules are backed by a lifetime warranty
- Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards
- Low power consumption of less than 1 W
- Hot-swappable with fiber-optic modules
The JD118BST is an HP JD118B compatible fiber transceiver module that has been designed, programmed and tested to work with HP® brand switches and routers. It delivers dependable 10 GbE connectivity over fiber cable, for 1000BASE-SX compliant networks, with a maximum distance of up to 550 m (1804 ft).
Technical Specifications:
- Wavelength: 850 nm
- Maximum Data Transfer Rate: 1.25 Gbps
- Type: Multi Mode Fiber
- Connection Type: LC Connector
- Maximum Transfer Distance: 550 m (1804 ft)
- MTBF: 3,381,761 hours
- Power Consumption: Less than 1 Watt
- Digital Diagnostics Monitoring (DDM): Yes
This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions.
Excellent
DELOCK 89569 - WLAN antenna, 2 x MHF® 4L connectors
19.2 EUR
This antenna by Delock allows the usage of the 2.4 GHz + 5 GHz WLAN bands indoors.Specification
- Connector: 2 x MHF® 4L plug
- Frequency range: 2400 - 2500 MHz, 5150 - 5875 MHz
- Bluetooth, WLAN 2.4 / 5.0 GHz, ZigBee 2.4 GHz, ISM
- Antenna gain: 2400 - 2500 MHz: 3 dBi, 5150 - 5875 MHz: 5 dBi
- Impedance: 50 Ohm
- VSWR: 2.0
- Polarisation: linear, vertical
- Mounting type: self adhesive
- Operating temperature: -10 °C ~ 55 °C
- Colour: black
- Cable type: coaxial
- Cable type: 1.13
- Cable colour: black
- Cable diameter: ca. 1.13 mm
- Cable attenuation: 3.2 dB @ 2.4 GHz per meter
- Smallest bending radius: 4.5 mm
- Cable length incl. connectors: 2 x ca. 15 cm
- Dimensions (LxWxH): ca. 38.20 x 13.50 x 1.60 mm
System requirements
- Device with two free MHF® 4L connectors
Package content
- Antenna
Recommended
TRENDNET TRN TEG-MGBS80 - Mini GBIC, 1000Base-LX
97.76 EUR
Mini-GBIC Single-Mode LC Module- Mini-GBIC module for single-mode fiber with LC connector type
- For distances up to 80km
- Designed to connect to a standard mini-GBIC slot
The TEG-MGBS80 mini-GBIC single mode module works with standard mini-GBIC slots on most switches.
This single-mode type LC module bridges distances up to 80 km (49.7 miles) and a 1000 Mbps LX (type LC) mini-GBIC connector is included.
- Meets IEEE 802.3z Gigabit Ethernet and Fiber Channel standards
- Industry standard SFP package
- Duplex LC connector
- 1.0625Gbps Fiber Channel compliant
- 1.25Gbps Gigabit Ethernet compliant
- 3.3V supply voltage
Featured
DIGITUS DN-82130 - Media converter, Gigabit Ethernet, RJ45 / SFP
61.58 EUR
Gigabit Ethernet media converter, SFP SFP open slot, without SFP module- Exclusive SFP module with a range of up to 80 km
- Sends data in high quality and also offers maximum reliability
- Fast transmission is guaranteed in the gigabit range
The media converters from DIGITUS® are an optimal solution for the migration of copper and fiber optic signals. You can now access fiber optic technology and bridge several kilometers without having to replace your entire network cabling. With our extensive range of products, you can respond to your individual requirements. The intuitive operation guarantees quick and easy installation. Years of experience and a wide range of products make DIGITUS® a reliable partner for your network technology.
Technical details
- Connection 1: RJ45
- Connection 2: SFP
- Mode: Copper
- Distance (km): Module-dependent
- Industrial use: no
- Transmission method: Module-dependent
- PoE injector: no
- Ethernet speed: Gigabit
- Converts wire-based network signals into fiber optic signals
- High quality and maximum reliability
- Connections: 1x RJ45, 1x SFP
- Range up to 80km
- Automatic cable detection - Auto MDI / MDI-X function
- Auto detection of full and half duplex
- Diagnostic LEDs for status and activity monitoring
- Supported standards: IEEE 802.3 Ethernet, IEEE 802.3u Fast Ethernet, IEEE 802.3z Gigabit Ethernet
- 2MB data buffer
- Operating temperature: 0 to 60°
- Dimensions (L x W x H): 95mm x 70mm x 26mm
- Weight: 200 g
- Standalone converter with external power supply unit
- Input voltage: 5V DC
- Exclusive SFP module
Scope of delivery:
- Media converter
- Quick start guide
- Power supply unit
Alternative
DELOCK 86539 - Optical Fiber Coupler LC Quad/LC Quad female 2 pieces green
21.27 EUR
With this LC Quad coupling by Delock, optical fiber male connectors can be easily connected to each other. The coupling enables a direct connection to the optical fiber cable and is suitable for simple mounting in optical fiber connection boxes, cabinets and patch panels.Protection by dust cover
The coupling is equipped with an appropriate cap to protect the sleeve from dust and to keep it clean.
Specification
• Connectors:
1 x LC Quad female >
1 x LC Quad female
• For single-mode fiber
• Ceramic sleeve
• With dust cover
• Mounting via metal holder or screws
• 2 x mounting holes
• Mounting hole diameter: 2.3 mm
• Pitch of screw hole: ca. 30.7 mm
• Panel cut-out (WxH): ca. 26.6 x 9.5 mm
• Operating temperature: -20 °C ~ 70 °C
• Material: plastic
• Colour: green
• Dimensions (LxWxH): ca. 29.2 x 25.6 x 9.3 mm
System requirements
• A free LC Quad plug
Package content
• 2 x LC Quad coupler
Package
• Poly bag
HOBBES INNOVATION HOBBES 256655G - LAN ID Giga network tester
144.31 EUR
LAN ID GigaThe Hobbes LANIDgiga is a highly efficient tester for quickly and reliably determining the network status and displaying it via LED.
Diagnose network problems during the installation or maintenance of LAN devices or ports.
The instrument differentiates the network status as follows:
- 1000 BASE-T full duplex
- 10/100 auto negotiation
- 100 BASE-Tx full duplex
- 100 BASE-Tx half duplex
- 10 BASE-T full duplex
- 10 BASE-T half duplex
The integrated PoE function identifies existing PoE and the type of PSE (power sourcing equipment) on the entire network.
The Hobbes LANIDgiga is equipped with a Portfinder function.
This helps to determine the appropriate port on the workstation: Simply connect the Hobbes LANIDgiga to an unknown or insecure port, it will send a 10/100 signal (auto-negotiation) to find the switch and the port.
Features:
- Checks the PoE status
- Identifies the type of PSE if the PoE voltage is detected on wire pair 12-36 (final span) or 45-78 (midspan).
- Identifies the bandwidth of the port up to Gigabit Ethernet
- Two RJ-45 connectors (one to check switch/hub, the other to check NIC)
- Port finder function
specifications:
- Connections: 2x RJ-45 (1 male, 1 female)
- Energy source: 2x AAA batteries.
DELOCK 87246 - RJ45 Cat.6a coupling with sealing cap
27.47 EUR
This RJ45 coupler by Delock can be used in a switch cabinet or distribution box to connect or extend two RJ45 plugs together. In combination with the Delock feed-through coupler (86995), it provides a secure and waterproof connection.IP67 dust and waterproof
The sealing cap protects the RJ45 jack from moisture, damage and dirt in outdoor areas.
Specification
- Connectors:
1 x RJ45 jack
1 x RJ45 jack - Cat.6A specification
- With sealing cap
- Protection class: IP67
- Housing material: plastic
- Colour: black
- Dimensions (LxD): ca. 31.6 x 27.0 mm
Package content
- RJ45 coupler
Package
- Zip poly bag
DELOCK 18372 - Protection box for 3.5'' HDD, black
18.24 EUR
This handy Delock box is suitable for storing and transporting a 3.5'' HDD. The hard drive is protected from damage and remains free of dirt and dust.Specifications
- Suitable for 3.5-inch HDDs
- Resealable
- Material: plastic
- Colour: black
- Dimensions (LxWxH): approx. 162 x 112 x 31 mm
Contents
- Protection box
Packaging
- Retail box
DELOCK 89014 - Vehicle Antenna LTE, WiFi, GNSS Multiband
102.92 EUR
This Delock multiband antenna is mounted on the roof a a car.This ''shark fin'' antenna has three different frequency bands. The GPS patch antenna receives signals from the GALILEO and GPS global navigation satellite systems. And it also works in all common LTE bands. The WiFi range is also covered by the 2.4 GHz frequency band.
Stylish and functional
The modern design of this shark fin antenna not only looks good but is also particularly stable and aerodynamic.
Specifications
- Connections:
- 1x FAKRA D socket
- 1x FAKRA Z socket
- 1x FAKRA C socket
- LTE FAKRA D:
- Frequency range:
- 698 - 960 MHz
- 1710 - 2690 MHz
- Aerial gain: 3.5 dBi
- VSWR: < 3.0
- Impedance: 50 ohms
- Polarisation: linear
- WiFi FAKRA Z:
- Frequency range:
- 2400 - 2483.5 MHz
- Aerial gain: 3.0 dBi
- VSWR: < 2.0
- Impedance: 50 ohms
- Polarisation: linear
- GNSS FAKRA C:
- Frequency range:
- GPS: 1.5754200 GHz
- GALILEO: 1.5754200 GHz
- Aerial gain: 2 dBi
- VSWR: < 1.5
- Impedance: 50 ohms
- Polarisation: RHCP
- LNA GNSS:
- Aerial gain: 28.0 dBi
- Noise: < 2.0 dB
- VSWR: < 2.0
- Power supply: 3.0 - 5.0 V
- Power consumption: < 15 mA
- Operating temperature: -40 °C - 85 °C
- Housing material: ABS
- Cable length: approx. 3 m
- Wire colour: black
- Cable type: RG-174
- Protection rating: IP67
- Dimensions (L x W x H): approx. 182 x 69 x 70 mm
System requirements
- Devices with Fakra connectors
ATTB 4721.01 - Radio amplifier - AM/FM, DAB/DAB+
92.54 EUR
Radio amplifier for the vehicles or indoor areas with the following features and properties:- Improves the reception quality of passive broadcasting aerials
- Is DRM-compatible thanks to extended bandwidth in the SW frequency range
- Splits AM/FM and DAB signals
- Quick and easy to mount
TELEGÄRTNER TG J00029A0061 - RJ-45 coupling, shielded, AMJ, Cat. 6
20.23 EUR
AMJ coupling K, Cat. 6A, f-f - Suitable for Class EA channel, 10 Gigabit Ethernet
- Suitable for RJ45/11/12 plugs
- Cat. 6A in accordance with IEC 60603-7-51
- Cat. 6A re-embedded, tested in accordance with IEC 60512-27-100
- Link certification: class EA in accordance with ISO/IEC 11801
- 10-gigabit Ethernet in compliance with IEEE 802.3an
- Contact over-bending protection: = 750 plugging cycles with RJ45/RJ11/RJ12 connectors
- Suitable for PoE+ in accordance with IEEE 802.3at
- With design-capable carrier module AMJ-S Up/0 flex - can be combined with covers from various switching-program manufacturers
- Integrated cable catch for cable diameters of up to 9 mm
- Universal, internationally available installation dimensions for 19.3 x 14.7-mm mounting cut-outs
- Visually monitored inspection of the RJ45 contact heights
- AMJ-S DD: with integrated protection against damage to the contacts by automatically releasing the connector
CISCO MGBLH1 - Mini GBIC, 1000BaseLH
267.32 EUR
Cisco Small Business MGBLH1 - SFP (Mini-GBIC)-Transceiver-ModulCisco® MFE and MGE Small Form-Factor Pluggable (SFP) or mini Gigabit Interface Converter (mini-GBIC) transceivers are easy-to-install modules that provide a simple way to add fiber connectivity or to add an extra Gigabit Ethernet port to your Cisco Small Business or Cisco Small Business Pro Series switches.
- 1000Base-LH
- Dual LC
- SMF fiber type
- 1310 nm wavelength
- 40 km operating distance
The Cisco MFE and MGE transceivers provide fast and reliable connectivity between switches that are located on different floors, in separate buildings, or on a small campus network needing connectivity between sites.
These transceivers can support both Fast and Gigabit Ethernet applications.
- Adds fiber-optic connectivity to Cisco Small Business and Cisco Small Business Pro Series switches
- �High-performance link for connecting networks within a building or small campus area
- �Easy removal with an integrated spring latch
- �Hot swappable to maintain network availability
DIGITUS DIGI DN-96331-4 - Fiber Optic Sliding Splice Box, 1U, Equipped, LC, OM4
123.6 EUR
Fiber Optic Sliding Splice Box, 1U, Equipped, LC, OM4FO splice box, 1U, equipped, 12x LC DX, OM4,incl. splice cassette, colored pigtails, couplers
Technical details
- Completely prefabricated, fiber pigtails exposed and inserted into the splice cassette(s)
- Colored pigtails
- Couplers with zirconia ceramic ferrule
- Couplers in polymer housing
- Carrier housing made of 1.0 mm steel sheet, varnished
- 1 height unit (44.45 mm)
- 483mm width (19'')
- 240mm depth
- M20/M25 screw, cassette, cassette cover and strain relief included
- Sliding
TP-LINK TPLINK TL-SM321B - Mini GBIC, 1000Base-BX
29.54 EUR
1000Base-BX WDM Bi-Directional SFP Module - WDM Bi-Directional SFP Module
- Supports WDM Bi-Directional technology, using a single strand of fiber, cost saving
What This Product Does
TP-LINK´s TL-SM321B adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10Km with TP-LINK´s Routers, Switches, Media Converters to provide high speed and stability.
CISCO GLCGE100FX - Mini GBIC, 100Base-FX
268.34 EUR
Cisco GLC-GE-100FX 100BASE-FX SFP SGMII Transceiver Module for Gigabit Ethernet SFP Ports- LC Duplex
- 1310nm wavelength
- Multimode
- -19~-14dBm TX Power
- 2 km max cable distance
- MSA compliant
ROLINE 17031303 - Cable manager, under table mounting, black
66.7 EUR
- Very stable
- Quick to install
- Provides plenty of room for all cables
- Colour: silver
- Delivery: 2x cable ducts 530 x 110 x 80 mm
Two cable ducts for clean cable routing under the desk
DIGITUS DIGI DN-96321-4 - Fiber Optic Splice Box, Equipped, SC, OM4
123.6 EUR
Fiber Optic Splice Box, Equipped, SC, OM4FO splice box, 1U, equipped, 12x SC DX, OM4, incl. splice cassette, colored pigtails, couplers
Technical details
- Completely prefabricated, fiber pigtails exposed and inserted into the splice cassette(s), crimp splice holders
- Colored pigtails
- Couplers with zirconia ceramic ferrule
- Couplers in polymer housing
- Carrier housing made of 1.0 mm steel sheet, varnished
- 1 height unit (44.45 mm)
- 483mm width (19'')
- 240mm depth
- M20/M25 screw, cassette, cassette cover and strain relief included
- 12x SC duplex, Multimode OM4
DIGITUS DIGI DN-96321-9 - Fiber Optic Splice Box, Equipped, SC, OS2
113.26 EUR
Fiber Optic Splice Box, Equipped, SC, OS2FO splice box, 1U, equipped, 12x SC DX, OS2,incl. splice cassette, colored pigtails, couplers
Technical details
- Completely prefabricated, fiber pigtails exposed and inserted into the splice cassette(s), crimp splice holders
- Colored pigtails
- Couplers with ceramic sleeve
- Couplers in polymer housing
- Carrier housing made of 1.0 mm steel sheet, varnished
- 1 height unit (44.45 mm)
- 483mm width (19'')
- 280mm depth
- M20/M25 screw, cassette, cassette cover and strain relief included
- Sliding
VALUE 21990660 - LC quad fibre-optic coupling, multi-mode
15.07 EUR
VALUE LC quad fibre-optic coupling, OM3, PBFibre-optic coupling for OM3 multi-mode fibres
- Fibre-optic coupling for extending fibre-optic cables or for mounting in front panels
- Phosphor bronze (PB) sleeve, plastic housing (aqua), for multi-mode OM3
- Quad LC coupling - fits into front panel cut-outs for duplex SC
TELEGÄRTNER TG J00060B0069 - Connection module Cat.7 for mounting rails
46.12 EUR
Single connection module for shielded and unshielded installation cables, with mounting rail adapter - Connection via LSA-Plus IDC connectors on a common printed circuit board
- Colour coded in accordance with EIA/TIA 568A and B
- Connection of 4-pair shielded/unshielded installation and patch cables from AWG 27-22
- Wire pairs can be routed to the terminal while retaining the twisting of the pairs
- Safe shield contacting with screw terminals directly on the printed circuit board
- Variable cable feeds
- Cable strain relief through standard cable ties (VM 8-8 Cat.7A)
- Tool-free mounting of stainless steel shielding hoods (19'' and surface-mounted version)
- Surface-mounted version: Incoming and outgoing cables from the same direction
- Surface-mounted, 19'' and single version: Incoming and outgoing cables offset by 180 degrees
- Earthing option directly on the printed circuit board (screw M4)
- EMC-safe according to DIN EN 61000-6-1 and 61000-6-2
DELOCK 88411 - HF RP-SMA jack > RP-TNC plug
17.13 EUR
Use this adapter to connect components of the radio frequency technology together.Specification
- RP-SMA jack
- RP-TNC Plug
- length: 28 mm
- Impedance: 50 Ohm
- Knurled ring
Package content
- Adaptor
Package
Poly Bag
TRENDNET TRN TI-PF11SFP - Media converter, Gigabit Ethernet, SFP
164.94 EUR
Industrial SFP to Gigabit PoE+ media converter- Hardened SFP to Gigabit PoE+ converter with IP30 protection
- SFP port supports both multi-mode and single-mode fiber
- Fibre optic networking at distances of up to 40 km with the TI-MGBS40 SFP module
- Supplies PoE- and Poe+ capable devices with up to 30W
- DIN-Rail and brackets for wall mounting
- Wide operating temperature range - 40 to 75 °C (-40 to 167 °F)
- Dual redundant power supplies with overload protection
TRENDnet's industrial SFP to Gigabit PoE+ media converter, model TI-PF11SFP, converts fiber to copper and supplies power to PoE and PoE+ compliant devices such as IP cameras, VoIP phones and wireless access points.
The hardened housing with IP30 protection class is suitable for extreme industrial environments.
Dual redundant power supplies (power supply available separately: TI-S12048) with overload protection reduce downtime to a minimum.
PoE+ Output
Converts fiber to copper and supplies power to PoE and PoE+ compliant devices such as IP cameras, VoIP phones and wireless access points.
Extreme ranges
Hardened IP30 switch with -40 to 75 °C (-40 to 167 °F) operating temperature range
Network Ports
1 x Gigabit PoE+ Ethernet port and 1 x SFP slot
DIN rail/wall mounting
Metal housing with protection class IP30 has DIN rail and wall mounting hardware
Switching capacity
2 Gbps switching capacity
Redundant power supply
Dual redundant power supplies with overload protection (power supply sold separately, models: TI-S12048)
jumbo frame
Sends larger packets or jumbo frames (up to 9 KB) for better performance
Extreme temperatures
Hardened converter is suitable for wide operating temperature range of -40 to 75 °C (-40 to 167 °F)
Electromagnetic compatibility
Meets the requirements of FCC Part 15 Section B for Class A devices and CE EN 55022 Class A standards
Certifications
Suitable for information technology equipment (ITE) (EN55022/24) and industrial, scientific and medical (ISM) equipment (EN55011)
Shock and vibration resistant
Shock (IEC 60068-2-27), free fall (IEC 60068-2-32) and vibration resistant (IEC 60068-2-6)
Grounding point
Ground point protects equipment from external electrical surges
CONIUGO CONIU 700300107S - GO central module SMS LTE
361.37 EUR
CONIU 700300107SGO Central Module LTE - SMS fault signalling and remote control system
GO Central Module LTE - SMS fault signalling and remote control system
The GO central module functions as an independent SMS signalling device and can be controlled remotely via SMS.
GO series for monitoring, telemetry, logging and remote maintenance as a modular system — only buy what you really need!
Areas of application
- Building automation
- Industrial automation
- Switching devices
- Switching systems
- Low-voltage switchgears
- Water/waste water technology
- Silo and container monitoring
- Security and monitoring technology
The GO central module LTE is designed as a modular monitoring, reporting and remote switching system.
Various expansion modules can be connected to the device, which the user can select according to their application.
The central module can manage up to 12 expansion modules, which are connected via a bus system — offering a fantastic cost/benefit ratio.
All the settings are configured via a RS232 or USB interface.
Technical features
- Any combination of add-on modules via bus system
- Simple installation
- Top hat rail mounting
- Battery operation (6 V/12 Ah) possible, integrated charging regulator
- GO central module provides a notification in the event of a power failure
Requirements
To use the GO central module, you will need:
- Stabilised plug-in power supply unit (optional)
- SIM card (prepaid/fixed contract, depending on the application) (optional)
- Additional GO I/O modules for different applications (optional)
- GO programming cable (USB or RS232) (optional)
- Remote LTE GSM antenna (optional)
Included with delivery
- GO central module LTE
- Manual
- Bus rail
Please see the data sheet for further technical information
STARTECH.COM ST SFPGLCLHSMST - SFP Module - Cisco GLC-LH-SM Compatible
66.75 EUR
1000 Mbps (1 Gbps), Single & Multi Mode Fiber, LC, 10 km (6.2 mi)- 100% compatibility with Cisco GLC-LH-SM guaranteed
- StarTech.com SFP modules are backed by a lifetime warranty
- Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards
- Low power consumption of less than 1 W
- Hot-swappable with fiber-optic modules
The SFPGLCLHSMST is a Cisco GLC-LH-SM compatible fiber transceiver module that has been designed, programmed and tested to work with Cisco® brand switches and routers. It delivers dependable 1GbE (1000 Mbps) connectivity over fiber cable, for 1000BASE-LX/LH compliant networks, with a maximum distance of up to 10 km (6.2 mi).
Technical Specifications:
- Wavelength: 1310 nm
- Maximum Data Transfer Rate: 1.25 Gbps
- Type: Single Mode / Multimode Fiber
- Connection Type: LC Connector
- Maximum Transfer Distance: 10 km (6.2 mi)
- MTBF: 3,092,408 hours
- Power Consumption: Less than 1 Watt
- Digital Diagnostics Monitoring (DDM): No
This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions.
WITTENBERG WIT K-103052 - Wall mount for GSM / UMTS / LTE antennas angular shape
20.23 EUR
Steel wall mount for GSM / UMTS / LTE antennas angular shape- galvanized
- Angle form
SHIVERPEAKS SHVP BS07-60050 - FO coupler, SC / SC, simplex, blue
11.97 EUR
shiverpeaks®-BASIC-S--Fiber optic connector, SC-SC, simplex, blueFiber optic connector suitable for distributors, patch panels, junction boxes or other applications.
With the fiber optic connector, you can easily connect two fiber optic patch cables.
- Connections: SC simplex socket to SC simplex socket
- for polishing type: Ultra Physical Contact (UPC) or Physical Contact (PC)
- Alignment sleeve material: Ceramic
- for fiber mode: Singlemode
- for category: OS1 / OS2
- Mounting type: with flange, with metal clip
- Connection style: Simplex
- Working temperature: -40 to +85 °C
- Storage temperature: -40 to +70 °C
- Color: blue
- Housing material: PC
- with dust protection caps
GOOD CONNECTIONS GC LW-K206 - Optical Fiber Coupler SC(UPC)/SC(UPC) duplex
11.4 EUR
Good Connections® fiber optic couplers allow you to connect two fiber optic patch cords together easily and without tools. The couplings can either be attached via the flange with self-tapping screws (not included) or clipped in via snap-in mounting.
Technical specification:
- LWL Duplex Coupling
- SC Socket on both sides (incl. dust protection caps)
- Design: UPC
- Suitable fiber type: Singlemode
- Plastic housing (ABS+PC, UL 94-V1) with flange and metal clip (snap-in)
- Ceramic sleeve (ferrule)
- Operating temperature: -20 °C to +70 °C
- Resistance: min. 500 mating cycles
- Insertion loss: < 0.2 dB
- Color: Blue (OS2)
ALLNET ALL4750 - Mini GBIC, 1000Base-SX/LC, multimode
40.95 EUR
ALLNET ALL4750-INDU SFP (mini GBIC) switch module, 1000 Mbit, SX/LC, industrial -40/+85 degrees- LC connector 1.125 G 850 nm multimode
- SFP, 550 m range
- Industrial -40 to +85 degrees
- For Allnet/D-link/Netgear/Allied/Lancom/Zyxel/Entersys/ZTE/Planet/Avago/MikroTik
DELOCK 66942 - 19'' FO patch panel, 1 U, black
35.74 EUR
This routing panel by Delock is suitable for mounting on the 19'' fiber optic HD (High Density) patch panel by Delock (66924).Optimal cable management
The routing panel enables clean cable routing. This prevents damage to cables, e.g. by twisting and bending.
Specification
- For mounting on 19'' fiber optic HD (High Density) patch panel, 1U
- Clean cable routing
- Colour: black
- Material: metal
- Dimensions (LxWxH): ca. 482 x 100 x 44 mm
System requirements
- 19'' fiber optic HD (High Density) patch panel
Package content
- 19'' fiber optic routing panel
Package
- Box
DELOCK 86423 - Adapter RJ45 plug angled > RJ45 jack Cat.6 UTP
13.26 EUR
With this adapter by Delock the RJ45 jack of a device can be angled by 90°. This makes it easier to connect a network cable in hard to reach places.
Specification
- Connectors: 1 x RJ45 plug downwards angled > 1 x RJ45 jack
- 1:1 connected
- Cat.6 specification
- Unshielded (UTP)
- Contacts gold-plated
- Dimensions (LxWxH): ca. 50.0 x 33.0 x 18.5 mm
System requirements
- A free RJ45 plug
Package content
- RJ45 adapter
INTELLINET INT 545044 - Mini GBIC, 1000Base-LX (LC) Single-Mode
82.25 EUR
Gigabit Fiber SFP Optical Transceiver Modules- Suitable for any Intellinet Gigabit Ethernet switch with SFP module slots or any MSA- or Cisco-compatible SFP port
- Data transmission rate: 1000 Mbps
- One 1000Base-LX single-mode fiber LC duplex port
Optical SFP transceiver module with Gigabit fiber
The new line of Intellinet Network Solutions Small Form Factor Pluggable (SFP) transceivers offers customers a combination of performance and affordability. These Mini-GBIC (Gigabit Interface Converter) modules are available in a metal housing that reduces electromagnetic interference and increases durability.
Small size for high-density fiber connections
The transceiver comes in a mini-GBIC form factor, making it ideal for environments that require many fiber connections by taking up less space in your closet and/or computer room.
Compatibility
Compatibility in your network is everything, and the Intellinet Network Solutions SFP Transceiver Module (model 545044) delivers. Use it with any Intellinet Network Solutions SFP-enabled network switch or other MSA-compatible SFP-enabled switch. And because the Intellinet Network Solutions SFP Transceiver Module is set to transmit manufacturer pn GLC-ZX-SMD, compatibility with your Cisco equipment is provided.
Hot toggleable
The Intellinet Network Solutions Gigabit Fiber SFP Optical Transceiver Module (Model 545044) is fully hot-pluggable, which allows you to install the module without rebooting your network switch for uninterrupted network traffic.
Digital Diagnostic Monitoring (DDM)
The Intellinet Network Solutions Gigabit Fiber SFP Optical Transceiver Module (Model 545044) supports standard Digital Diagnostic Monitoring (DDM) features, also known as Digital Optical Monitoring (DOM). This gives the user the ability to monitor parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current and transceiver supply voltage, in real time.
- Suitable for any Intellinet Gigabit Ethernet switch with SFP module slots or any MSA or Cisco compliant SFP port
- Data transmission rate: 1000 Mbit/s
- One 1000Base-LX single-mode fiber LC duplex connector
- Fiber distance support: up to 80 km (49.7 mi.)
- Wavelength: 1550 nm
- Compliant with the SFP Multi-Source Agreement (MSA)
- Corresponds to the Cisco GLC-ZX-SMD transceiver
- SFP standard form factor
- Supports digital diagnostic monitoring (DDM)
- Low EMI due to fully metallic housing
- Up to 1.25 Gbit/s bidirectional communication
- Supports hot-plugging
DELOCK 89759 - FAKRA E plug spring pin for crimping
14.07 EUR
This plug by Delock is suitable for connecting components of radio frequency technology.Specification
• Connector: 1 x FAKRA E plug
• FAKRA E: RAL 6002 Leaf green
• Pin: brass gold plated
• Snap ring: PA66 GF30
• Insulator: PTFE
• Housing: brass nickel plated
• Plastic shell: PA66 GF30
• Useable cable: RG-174, RG-316
• Dimensions (LxWxH): ca. 25.6 x 9.4 x 7.4 mm
System requirements
• Coaxial cable suitable for crimping
Package content
• FAKRA plug
Package
• Poly bag
INTELLINET INT 508322 - Media converter, Fast Ethernet, SC, singlemode
146.85 EUR
Fast Ethernet Industrial Media Converter100Base-TX to 100Base-FX (SC) single mode, 20 km, metal housing with IP40 protection class, DIN rail mounting
Supported media:
- 10/100Base-TX Cat5e or higher UTP/STP RJ45
- 1000Base-LX singlemode 8.3/125 µm, 8.7/125 µm, 8/125 µm or 10/125 µm
Range:
- Fiber optic cable: 20 km
- RJ45 cable: 100 m
- Redundant power supply with two inputs (12 - 58 V DC) and I/O terminal strip
- Requires industrial power supply (not included)
- Port overvoltage protection up to 6 kV
- Tested for shock resistance (IEC 60068-2-27), free fall (IEC 60068-2-32) and vibration (IEC 60068-2-6)
- Wavelength 1310 nm
- Supports operation in full duplex mode or half duplex mode with autonegotiation
- For ambient temperatures from -40 to 75°C
- Supports 8,000 MAC addresses with auto-learning and auto-aging
- 1 MB of buffer memory
- Supports jumbo frames up to 10 Kbytes
- Fanless design for quiet operation
STARTECH.COM ST 455883B21ST - SFP Module - HP 455883-B21 Comp - TAA
242.46 EUR
10 Gbps, Multi Mode Fiber, LC, 300 m (984 ft), TAA- 100% compatibility with HP 455883-B21 guaranteed
- StarTech.com SFP modules are backed by a lifetime warranty
- Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards
- Low power consumption of less than 1 W
- Hot-swappable with fiber-optic modules
The 455883B21ST is a TAA compliant HP 455883-B21 compatible fiber transceiver module that has been designed, programmed and tested to work with HP® brand switches and routers. It delivers dependable 10 GbE connectivity over fiber cable, for 10GBASE-SR compliant networks, with a maximum distance of up to 300 m (984 ft).
Technical Specifications:
- Wavelength: 850 nm
- Maximum Data Transfer Rate: 11.1 Gbps
- Type: Multi Mode Fiber
- Connection Type: LC Connector
- Maximum Transfer Distance: 300 m (984 ft)
- MTBF: 3,068,049 hours
- Power Consumption: Less than 1 Watt
- Digital Diagnostics Monitoring (DDM): Yes
This SFP+ fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions.
ALLNET USG-RMKIT - UniFi rack mount Kit, 1 HE, silver
73.88 EUR
You can use the Rack Mount Kit to mount the UBIQUITI USG in a standard 1-U high rack.You can accommodate up to 2 USG in the rack mount kit.
The USG is not included
- Color: silver