RED MAGNETICS ITS-LZ2560D24 - Cylinder solenoid, 2560 D, 24 V DC, 10 W, push solenoid with str
30.31 EUR
Consult the complete sheet with in-depth details, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; it classifies in the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
Due to their closed design, cylinder solenoids are more efficient than U-shaped magnets.
They can be used in harsh environments up to a maximum temperature of 130°C thanks to the very stable and resistant housing.
Features:
Voltage:
Mounting:
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Due to their closed design, cylinder solenoids are more efficient than U-shaped magnets.
They can be used in harsh environments up to a maximum temperature of 130°C thanks to the very stable and resistant housing.
- Stroke: 17.0 - 25.0 mm
- Weight: 181 g
Features:
- Holding force: 2.2 kg
- Initial force: 0.75 kg
- Peak force: 22 kg
Voltage:
- 24 V DC (standard)
Mounting:
- Screw thread 3/4-16UNF-2A
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
RED MAGNETICS ITS-LZ2560D12 - Cylinder solenoid, 2560 D, 12 V DC, 10 W, push solenoid with str
30.31 EUR
Due to their closed design, cylinder solenoids are more efficient than U-shaped magnets.They can be used in harsh environments up to a maximum temperature of 130°C thanks to the very stable and resistant housing.
- Stroke: 17.0 - 25.0 mm
- Weight: 181 g
Features:
- Holding force: 2.2 kg
- Initial force: 0.75 kg
- Peak force: 22 kg
Voltage:
- 12 V DC (standard)
Mounting:
- Screw thread 3/4-16UNF-2A
RED MAGNETICS ITS-LZ3869Z24 - Cylinder solenoid, 3869 Z, 24 V DC, 16.8 W, pull solenoid with s
61.73 EUR
Due to their closed design, cylinder solenoids are more efficient than U-shaped magnets.They can be used in harsh environments up to a maximum temperature of 130°C thanks to the very stable and resistant housing.
- Stroke: 20.0 - 30.0 mm
- Weight: 500 g
Features:
- Holding force: 4.2 kg
- Initial force: 0.5 kg
- Peak force: 8.5 kg
Voltage:
- 24 V DC (standard)
Mounting:
- Holes for M3.5
RED MAGNETICS ITS-LZ3869Z12 - Cylinder solenoid, 3869 Z, 12 V DC, 16.8 W, pull solenoid with s
61.73 EUR
Due to their closed design, cylinder solenoids are more efficient than U-shaped magnets.They can be used in harsh environments up to a maximum temperature of 130°C thanks to the very stable and resistant housing.
- Stroke: 20.0 - 30.0 mm
- Weight: 500 g
Features:
- Holding force: 4.2 kg
- Initial force: 0.5 kg
- Peak force: 8.5 kg
Voltage:
- 12 V DC (standard)
Mounting:
- Holes for M3.5
RED MAGNETICS ITS-LZ2560Z12 - Cylinder solenoid, 2560 Z, 12 V DC, 10 W, pull solenoid with str
30.31 EUR
Due to their closed design, cylinder solenoids are more efficient than U-shaped magnets.They can be used in harsh environments up to a maximum temperature of 130°C thanks to the very stable and resistant housing.
- Stroke: 17.0 - 25.0 mm
- Weight: 181 g
Features:
- Holding force: 2.2 kg
- Initial force: 0.75 kg
- Peak force: 22 kg
Voltage:
- 12 V DC (standard)
Mounting:
- Screw thread 3/4-16UNF-2A
RED MAGNETICS ITS-PE202512 - Permanent holding magnet, 2025, 12 V DC, 4 W, pot magnet with st
58.48 EUR
Permanent electro holding magnet - magnetic force is neutralised when power is applied. - Weight: 70 g
- Holding force: 45 N
- Tightening plate thickness: 3 mm
Voltage:
- 12 V DC (standard)
Mounting:
- With M4 threaded holes on the bottom
RED MAGNETICS ITS-PE151512 - Permanent holding magnet, 1515, 12 V DC, 3.6 W, pot magnet with
53.16 EUR
Permanent electro holding magnet - magnetic force is neutralised when power is applied. - Weight: 40 g
- Holding force: 25 N
Voltage:
- 12 V DC (standard)
Mounting:
- With M3 threaded holes on the bottom
RED MAGNETICS ITS-LZ3869D12 - Cylinder solenoid, 3869 D, 12 V DC, 16.8 W, push solenoid with s
61.58 EUR
Due to their closed design, cylinder solenoids are more efficient than U-shaped magnets.They can be used in harsh environments up to a maximum temperature of 130°C thanks to the very stable and resistant housing.
- Stroke: 20.0 - 30.0 mm
- Weight: 500 g
Features:
- Holding force: 4.2 kg
- Initial force: 0.5 kg
- Peak force: 8.5 kg
Voltage:
- 12 V DC (standard)
Mounting:
- Holes for M3.5
RED MAGNETICS ITS-LZ1949D24 - Cylinder solenoid, 1949 D, 24 V DC, 7 W, push solenoid with stra
27.47 EUR
Due to their closed design, cylinder solenoids are more efficient than U-shaped magnets.They can be used in harsh environments up to a maximum temperature of 130°C thanks to the very stable and resistant housing.
- Stroke: 10.0 - 18.0 mm
- Weight: 81 g
Features:
- Holding force: 1.1 kg
- Initial force: 0.6 kg
- Peak force: 11 kg
Voltage:
- 24 V DC (standard)
Mounting:
- Screw thread 9/16-18UNF-2A
RED MAGNETICS ITS-PE704512 - Permanent holding magnet, 7045, 12 V DC, 15 W, pot magnet with s
139.1 EUR
Permanent electro holding magnet - magnetic force is neutralised when power is applied. - Weight: 1090 g
- Holding force: 720 N
- Tightening plate thickness: 25 mm
Voltage:
- 12 V DC (standard)
Mounting:
- With M8 threaded holes on the bottom
RED MAGNETICS ITS-LS3830BD24 - Frame solenoid, 3830b D, 24 V DC, 8 W, push solenoid with strand
37.65 EUR
The mounting position of the solenoid magnets is variable. The force of an electro solenoid actuator can be pulling, pushing or bilateral. However, it must only be exerted in the axial direction -increased bearing wear occurs if the electro-solenoid actuator is subjected to lateral loads. Includes damping ring to dampen the impact noise in an open design with a closed yoke.
- Stroke: 18.0 - 25.0 mm
- Weight: 317 g
Features:
- Holding force: 5.6 kg
- Initial force: 0.2 kg
- Peak force: 5.6 kg
Voltage:
- 24 V DC (standard)
Mounting:
- M3 threaded holes
RED MAGNETICS ITS-LS1110BD24 - Frame solenoid, 1110b D, 24 V DC, 1.1 W, push solenoid with stra
18.37 EUR
The mounting position of the solenoid magnets is variable. The force of an electro solenoid actuator can be pulling, pushing or bilateral. However, it must only be exerted in the axial direction -increased bearing wear occurs if the electro-solenoid actuator is subjected to lateral loads. Includes damping ring to dampen the impact noise in an open design with a closed yoke.
- Stroke: 3.0 - 6.0 mm
- Weight: 10 g
Features:
- Holding force: 0.12 kg
- Initial force: 0.018 kg
- Peak force: 0.2 kg
Voltage:
- 24 V DC (standard)
Mounting:
- M3 threaded holes
RED MAGNETICS ITS-PE121212 - Permanent holding magnet, 1212, 12 V DC, 6 W, pot magnet with st
50.98 EUR
Permanent electro holding magnet - magnetic force is neutralised when power is applied. - Weight: 20 g
- Holding force: 15 N
Voltage:
- 12 V DC (standard)
Mounting:
- With M3 threaded holes on the bottom
RED MAGNETICS ITS-PE101012 - Permanent holding magnet, 1010, 12 V DC, 3 W, pot magnet with st
46.08 EUR
Permanent electro holding magnet - magnetic force is neutralised when power is applied. - Weight: 15 g
- Holding force: 3 N
Voltage:
- 12 V DC (standard)
Mounting:
- With M2 threaded holes on the bottom
RED MAGNETICS ITS-LZ1949Z12 - Cylinder solenoid, 1949 Z, 12 V DC, 7 W, pull solenoid with stra
27.83 EUR
Due to their closed design, cylinder solenoids are more efficient than U-shaped magnets.They can be used in harsh environments up to a maximum temperature of 130°C thanks to the very stable and resistant housing.
- Stroke: 10.0 - 18.0 mm
- Weight: 81 g
Features:
- Holding force: 1.1 kg
- Initial force: 0.6 kg
- Peak force: 11 kg
Voltage:
- 12 V DC (standard)
Mounting:
- Screw thread 9/16-18UNF-2A
RED MAGNETICS ITS-LS4035D24 - Frame solenoid, 4035 D, 24 V DC, 12.7 W, push solenoid with stra
64.11 EUR
The mounting position of the solenoid magnets is variable. The force of an electro solenoid actuator can be pulling, pushing or bilateral. However, it must only be exerted in the axial direction -increased bearing wear occurs if the electro-solenoid actuator is subjected to lateral loads. Includes damping ring to dampen the impact noise in an open design with a closed yoke.
- Stroke: 25.0 - 40.0 mm
- Weight: 530 g
Features:
- Holding force: 1.2 kg
- Initial force: 0.8 kg
- Peak force: 7.5 kg
Voltage:
- 24 V DC (standard)
Mounting:
- M4 threaded holes
RED MAGNETICS ITS-PE704524 - Permanent holding magnet, 7045, 24 V DC, 15 W, pot magnet with s
139.1 EUR
Permanent electro holding magnet - magnetic force is neutralised when power is applied. - Weight: 1090 g
- Holding force: 720 N
- Tightening plate thickness: 25 mm
Voltage:
- 24 V DC (standard)
Mounting:
- With M8 threaded holes on the bottom
RED MAGNETICS ITS-LS5852D12 - Frame solenoid, 5852 D, 12 V DC, 16 W, push solenoid with strand
99.25 EUR
The mounting position of the solenoid magnets is variable. The force of an electro solenoid actuator can be pulling, pushing or bilateral. However, it must only be exerted in the axial direction -increased bearing wear occurs if the electro-solenoid actuator is subjected to lateral loads. Includes damping ring to dampen the impact noise in an open design with a closed yoke.
- Stroke: 30.0 - 40.0 mm
- Weight: 1090 g
Features:
- Holding force: 4.2 kg
- Initial force: 0.5 kg
- Peak force: 7.5 kg
Voltage:
- 12 V DC (standard)
Mounting:
- M4 threaded holes
RED MAGNETICS ITS-LS3830BD12 - Frame solenoid, 3830b D, 12 V DC, 8 W, push solenoid with strand
37.65 EUR
The mounting position of the solenoid magnets is variable. The force of an electro solenoid actuator can be pulling, pushing or bilateral. However, it must only be exerted in the axial direction -increased bearing wear occurs if the electro-solenoid actuator is subjected to lateral loads. Includes damping ring to dampen the impact noise in an open design with a closed yoke.
- Stroke: 18.0 - 25.0 mm
- Weight: 317 g
Features:
- Holding force: 5.6 kg
- Initial force: 0.2 kg
- Peak force: 5.6 kg
Voltage:
- 12 V DC (standard)
Mounting:
- M3 threaded holes
RED MAGNETICS ITS-PE352912 - Permanent holding magnet, 3529, 12 V DC, 28 W, pot magnet with s
70.42 EUR
Permanent electro holding magnet - magnetic force is neutralised when power is applied. - Weight: 200 g
- Holding force: 300 N
- Tightening plate thickness: 5 mm
Voltage:
- 12 V DC (standard)
Mounting:
- With M5 threaded holes on the bottom
RED MAGNETICS ITS-LZ1335Z12 - Cylinder solenoid, 1335 Z, 12 V DC, 4 W, pull solenoid with stra
24.21 EUR
Due to their closed design, cylinder solenoids are more efficient than U-shaped magnets.They can be used in harsh environments up to a maximum temperature of 130°C thanks to the very stable and resistant housing.
- Stroke: 3.0 - 9.0 mm
- Weight: 23 g
Features:
- Holding force: 0.25 kg
- Initial force: 0.4 kg
- Peak force: 2 kg
Voltage:
- 12 V DC (standard)
Mounting:
- Screw thread 3/8-32UNEF
RED MAGNETICS ITS-LS1110BD12 - Frame solenoid, 1110b D, 12 V DC, 1.1 W, push solenoid with stra
18.37 EUR
The mounting position of the solenoid magnets is variable. The force of an electro solenoid actuator can be pulling, pushing or bilateral. However, it must only be exerted in the axial direction -increased bearing wear occurs if the electro-solenoid actuator is subjected to lateral loads. Includes damping ring to dampen the impact noise in an open design with a closed yoke.
- Stroke: 3.0 - 6.0 mm
- Weight: 10 g
Features:
- Holding force: 0.12 kg
- Initial force: 0.018 kg
- Peak force: 0.2 kg
Voltage:
- 12 V DC (standard)
Mounting:
- M3 threaded holes
RED MAGNETICS ITS-PE151524 - Permanent holding magnet, 1515, 24 V DC, 3.6 W, pot magnet with
53.16 EUR
Permanent electro holding magnet - magnetic force is neutralised when power is applied. - Weight: 40 g
- Holding force: 25 N
Voltage:
- 24 V DC (standard)
Mounting:
- With M3 threaded holes on the bottom
RED MAGNETICS ITS-LZ1949D12 - Cylinder solenoid, 1949 D, 12 V DC, 7 W, push solenoid with stra
27.47 EUR
Due to their closed design, cylinder solenoids are more efficient than U-shaped magnets.They can be used in harsh environments up to a maximum temperature of 130°C thanks to the very stable and resistant housing.
- Stroke: 10.0 - 18.0 mm
- Weight: 81 g
Features:
- Holding force: 1.1 kg
- Initial force: 0.6 kg
- Peak force: 11 kg
Voltage:
- 12 V DC (standard)
Mounting:
- Screw thread 9/16-18UNF-2A
RED MAGNETICS ITS-LX151312 - Solenoid actuator, bistable, 1513, 12 V DC, 24 W, frame solenoid
34.14 EUR
Bistable linear magnet in frame design. Due to the two layers in which the magnet can remain de-energised, it is ideal for locks that do not have a fixed power source.- Stroke: 6 mm
- Weight: 65 g
- Holding force: 6 N
Voltage:
- 12 V DC (standard)
Mounting:
- M2.5 and M3 threaded holes
RED MAGNETICS ITS-PE121224 - Permanent holding magnet, 1212, 24 V DC, 6 W, pot magnet with st
50.98 EUR
Permanent electro holding magnet - magnetic force is neutralised when power is applied. - Weight: 20 g
- Holding force: 15 N
Voltage:
- 24 V DC (standard)
Mounting:
- With M3 threaded holes on the bottom
RED MAGNETICS ITS-PE824512 - Permanent holding magnet, 8245, 12 V DC, 60 W, pot magnet with s
232.9 EUR
Permanent electro holding magnet - magnetic force is neutralised when power is applied. - Weight: 1300 g
- Holding force: 1900 N
- Tightening plate thickness: 15 mm
Voltage:
- 12 V DC (standard)
Mounting:
- With M8 threaded holes on the bottom
RED MAGNETICS ITS-LS2924BD12 - Frame solenoid, 2924b D, 12 V DC, 4.5 W, push solenoid with stra
26.44 EUR
The mounting position of the solenoid magnets is variable. The force of an electro solenoid actuator can be pulling, pushing or bilateral. However, it must only be exerted in the axial direction -increased bearing wear occurs if the electro-solenoid actuator is subjected to lateral loads. Includes damping ring to dampen the impact noise in an open design with a closed yoke.
- Stroke: 12.0 - 20.0 mm
- Weight: 147 g
Features:
- Holding force: 1.1 kg
- Initial force: 0.2 kg
- Peak force: 1.022 kg
Voltage:
- 12 V DC (standard)
Mounting:
- M3 threaded holes
RED MAGNETICS ITS-LZ1335D24 - Cylinder solenoid, 1335 D, 24 V DC, 4 W, push solenoid with stra
24.21 EUR
Due to their closed design, cylinder solenoids are more efficient than U-shaped magnets.They can be used in harsh environments up to a maximum temperature of 130°C thanks to the very stable and resistant housing.
- Stroke: 3.0 - 9.0 mm
- Weight: 23 g
Features:
- Holding force: 0.25 kg
- Initial force: 0.4 kg
- Peak force: 2 kg
Voltage:
- 24 V DC (standard)
Mounting:
- Screw thread 3/8-32UNEF
RED MAGNETICS ITS-LX151324 - Solenoid actuator, bistable, 1513, 24 V DC, 24 W, frame solenoid
34.14 EUR
Bistable linear magnet in frame design. Due to the two layers in which the magnet can remain de-energised, it is ideal for locks that do not have a fixed power source.- Stroke: 6 mm
- Weight: 65 g
- Holding force: 6 N
Voltage:
- 24 V DC (standard)
Mounting:
- M2.5 and M3 threaded holes
RED MAGNETICS ITS-LZ1335Z24 - Cylinder solenoid, 1335 Z, 24 V DC, 4 W, pull solenoid with stra
24.21 EUR
Due to their closed design, cylinder solenoids are more efficient than U-shaped magnets.They can be used in harsh environments up to a maximum temperature of 130°C thanks to the very stable and resistant housing.
- Stroke: 3.0 - 9.0 mm
- Weight: 23 g
Features:
- Holding force: 0.25 kg
- Initial force: 0.4 kg
- Peak force: 2 kg
Voltage:
- 24 V DC (standard)
Mounting:
- Screw thread 3/8-32UNEF
RED MAGNETICS ITS-PE101024 - Permanent holding magnet, 1010, 24 V DC, 3 W, pot magnet with st
46.08 EUR
Permanent electro holding magnet - magnetic force is neutralised when power is applied. - Weight: 15 g
- Holding force: 3 N
Voltage:
- 24 V DC (standard)
Mounting:
- With M2 threaded holes on the bottom
RED MAGNETICS ITS-PE352924 - Permanent holding magnet, 3529, 24 V DC, 28 W, pot magnet with s
70.42 EUR
Permanent electro holding magnet - magnetic force is neutralised when power is applied. - Weight: 200 g
- Holding force: 300 N
- Tightening plate thickness: 5 mm
Voltage:
- 24 V DC (standard)
Mounting:
- With M5 threaded holes on the bottom
RED MAGNETICS ITS-LZ1335D12 - Cylinder solenoid, 1335 D, 12 V DC, 4 W, push solenoid with stra
24.21 EUR
Due to their closed design, cylinder solenoids are more efficient than U-shaped magnets.They can be used in harsh environments up to a maximum temperature of 130°C thanks to the very stable and resistant housing.
- Stroke: 3.0 - 9.0 mm
- Weight: 23 g
Features:
- Holding force: 0.25 kg
- Initial force: 0.4 kg
- Peak force: 2 kg
Voltage:
- 12 V DC (standard)
Mounting:
- Screw thread 3/8-32UNEF
RED MAGNETICS ITS-LX221824 - Solenoid actuator, bistable, 2218, 24 V DC, 36 W, frame solenoid
56.88 EUR
Bistable linear magnet in frame design. Due to the two layers in which the magnet can remain de-energised, it is ideal for locks that do not have a fixed power source.- Stroke: 6.0 - 10.0 mm
- Weight: 75 g
- Holding force: 4 N
Voltage:
- 24 V DC (standard)
Mounting:
- M3 threaded holes
RED MAGNETICS ITS-LS3830BZ24 - Frame solenoid, 3830b Z, 24 V DC, 8 W, pull solenoid with strand
37.65 EUR
The mounting position of the solenoid magnets is variable. The force of an electro solenoid actuator can be pulling, pushing or bilateral. However, it must only be exerted in the axial direction -increased bearing wear occurs if the electro-solenoid actuator is subjected to lateral loads. Includes damping ring to dampen the impact noise in an open design with a closed yoke.
- Stroke: 18.0 - 25.0 mm
- Weight: 317 g
Features:
- Holding force: 5.6 kg
- Initial force: 0.2 kg
- Peak force: 5.6 kg
Voltage:
- 24 V DC (standard)
Mounting:
- M3 threaded holes
RED MAGNETICS ITS-LS1110BZ24 - Frame solenoid, 1110b Z, 24 V DC, 1.1 W, pull solenoid with stra
18.37 EUR
The mounting position of the solenoid magnets is variable. The force of an electro solenoid actuator can be pulling, pushing or bilateral. However, it must only be exerted in the axial direction -increased bearing wear occurs if the electro-solenoid actuator is subjected to lateral loads. Includes damping ring to dampen the impact noise in an open design with a closed yoke.
- Stroke: 3.0 - 6.0 mm
- Weight: 10 g
Features:
- Holding force: 0.12 kg
- Initial force: 0.018 kg
- Peak force: 0.2 kg
Voltage:
- 24 V DC (standard)
Mounting:
- M3 threaded holes
RED MAGNETICS ITS-LS4035Z24 - Frame solenoid, 4035 Z, 24 V DC, 12.7 W, pull solenoid with stra
64.11 EUR
The mounting position of the solenoid magnets is variable. The force of an electro solenoid actuator can be pulling, pushing or bilateral. However, it must only be exerted in the axial direction -increased bearing wear occurs if the electro-solenoid actuator is subjected to lateral loads. Includes damping ring to dampen the impact noise in an open design with a closed yoke.
- Stroke: 25.0 - 40.0 mm
- Weight: 530 g
Features:
- Holding force: 1.2 kg
- Initial force: 0.8 kg
- Peak force: 7.5 kg
Voltage:
- 24 V DC (standard)
Mounting:
- M4 threaded holes
RED MAGNETICS ITS-LX272312 - Solenoid actuator, bistable, 2723, 12 V DC, 30 W, frame solenoid
49.85 EUR
Bistable linear magnet in frame design. Due to the two layers in which the magnet can remain de-energised, it is ideal for locks that do not have a fixed power source.- Stroke: 8 mm
- Weight: 160 g
- Holding force: 5 N
Voltage:
- 12 V DC (standard)
Mounting:
- M3 threaded holes
RED MAGNETICS ITS-LS1110BZ12 - Frame solenoid, 1110b Z, 12 V DC, 1.1 W, pull solenoid with stra
18.37 EUR
The mounting position of the solenoid magnets is variable. The force of an electro solenoid actuator can be pulling, pushing or bilateral. However, it must only be exerted in the axial direction -increased bearing wear occurs if the electro-solenoid actuator is subjected to lateral loads. Includes damping ring to dampen the impact noise in an open design with a closed yoke.
- Stroke: 3.0 - 6.0 mm
- Weight: 10 g
Features:
- Holding force: 0.12 kg
- Initial force: 0.018 kg
- Peak force: 0.2 kg
Voltage:
- 12 V DC (standard)
Mounting:
- M3 threaded holes