KNIPEX KN 16 64 125 SB - Stripping tool, for flat and round cables, 4.0 - 13.0 mm²
- For flat cables up to 12 mm in width
- For stripping all standard round and wet-room cables 4.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²)
- Stripping device for cross-sections of 0.8/1.5/2.5 mm² (AWG 20/16/14)
- With opening spring and locking pawl
- For working in tight and difficult-to-reach areas
- Also for use in branching or splitter boxes
- Housing: Plastic, glass-fibre reinforced
EAN: 4003773076933
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
To protect against unintentional opening of the connector, secure the thread between the housing and the connector head with a suitable cyanoacrylate adhesive when used in circuits with dangerous contact voltages. This does not apply to connectors used in SELV and PELV circuits in accordance with IEC 61140 (EN 61140, VDE 0140-1).
Please note the degree of contamination and the over-voltage category.
The connector must not be plugged in or unplugged under load. Failure to comply with these instructions and improper use may result in personal injury.
To protect against unintentional opening of the connector, secure the thread between the housing and the connector head with a suitable cyanoacrylate adhesive when used in circuits with dangerous contact voltages. This does not apply to connectors used in SELV and PELV circuits in accordance with IEC 61140 (EN 61140, VDE 0140-1).
Please note the degree of contamination and the over-voltage category.
The connector must not be plugged in or unplugged under load. Failure to comply with these instructions and improper use may result in personal injury.
This SMA antenna cable is suitable for connecting devices such as modems, routers and other devices with antennas.
This SMA antenna cable is suitable for connecting devices such as satellite antennas to your TV or decoder
- PC connector: HDB, PS/2 and audio
- Console connector: SPHD (3-in-1) for keyboard, mouse and screen
- Length: 5m (flat)
- PC connector: HDB, PS/2 and audio
- Console connector: SPHD (3-in-1) for keyboard, mouse and screen
- Length: 1.8m (flat)
• For flat cable plug
• Extremely high flexibility
• With or without shielding
• Fixing areas for insulation displacement connectors every 36 mm
- Connections: 90° earthing contact plug - IEC socket
- Cover: potted, CEE7/7-C13, VDE, 230 V
- Cable construction: 3 x 1.0 mm²
- Core material: Copper
- Plug material: FeNi
- Contact surface: nickel-plated
- Plug color: orange
- Cable color: orange
By the three different colored insulation reversed polarity are not possible .
The cables prove themselves because of the high quality with best current management .
features:
- High quality of workmanship
- Ideal for servos
- Colour coded and insulated cables
Technical data :
- Length : 10 meters
- Connector: JR ( Graupner )
- Cores: 3
- Cable cross section: 0,25mm²
- Construction: flat
TWIST 2 Metallic cover plate round silver matt lacquered 1x protective contact socket black with enhanced touch protection 1xUSB A/C 22W Charger supply cable 0.2m H05VV-F3G1.5mm² black with GST18 plug black packed in a box
TWIST 2 Metallic cover plate round silver matt lacquered 2x protective contact sockets black with increased touch protection 2.0m H05VV-F 3G1.5mm² black supply cable with wire end sleeves and enclosed protective contact mounting plug packed in a box
TWIST 2 Metallic cover plate round white matt, similar to RAL9010 30GE silk matt 1xprotective contact socket outlet black with enhanced touch protection 1xUSB A/C 22W Charger supply cable 2.0m H05VV-F 3G1.5mm² black with wire end ferrules and enclosed protective contact mounting plug packed in a box
TWIST 2 Metallic cover plate round black matt, similar to RAL 9005 30GE silk matt, 1x black protective contact socket with enhanced touch protection, 1x USB A/C 22W charger, 2.0 m H05VV-F 3G1.5 mm² black supply cable with wire end sleeves and enclosed protective contact mounting plug, packed in a box
TWIST 2 metallic round cover plate, white matt, similar to RAL9010 30GE silk matt 2x protective contact socket outlets black with enhanced touch protection, 2.0m H05VV-F 3G1.5mm² black supply cable with wire end sleeves and enclosed protective contact mounting plug, packed in a box. Description Check TWIST2 from the body and replace with REV01 if necessary.
TWIST 2 Metallic cover plate in stainless steel look, round 2x protective contact sockets black with enhanced touch protection, 2.0 m H05VV-F 3G1.5 mm² black supply cable with wire end sleeves and enclosed protective contact mounting plug, packed in a box
- Connections: earthed contact plug 90°- non-heating appliance socket
- Housing: moulded, CEE7/7-C13, VDE, 230 V
- Cable design: 3 x 1.0 mm²
- Wire material: copper
- Connector material: FeNi
- Contact surface: nickel-plated
- Connector colour: green
- Cable colour: green
• Insulation displacement technique, very fast on the spot treatment possible
• Simple plugging system with clip interlocking
• Compact, space saving
• Cables with 7...19 tin-plated strands, copper alloy, PVC and PE insulation are optimally usable
• Insulation displacement technique, very fast on the spot treatment possible
• Simple plugging system with clip interlocking
• Compact, space saving
• Cables with 7...19 tin-plated strands, copper alloy, PVC and PE insulation are optimally usable
• Insulation displacement technique, very fast on the spot treatment possible
• Simple plugging system with clip interlocking
• Compact, space saving
• Cables with 7...19 tin-plated strands, copper alloy, PVC and PE insulation are optimally usable
• Design: 1 NO 1 NC
• Design: flat head
• No. of pins: 1
• Colour: blue
• Connection: Pin 1.8 x 0.4 mm
• Impact resistance: IK09
• Drilling diameter: 16 mm
• Switching voltage: 3 A, 250 V
• Weight: 0.016 kg
- Cable holder type FB (loose) for flat roofs
- Roof conductor holder, for flat roofs for fastening
- round conductors on flat roofs
- with single cable holder type FB
- made of frost-resistant concrete and
- weather-resistant plastic, UV-stabilized
- Plastic and concrete parts can be recycled separately
- DEHNGEPRUEFT: No
- Cable routing: loose
- Cable holder material: Plastic
- Cable holder mounting Rd: 8 mm
- Stone: Concrete (C35/45)
- Weight: 1 kg
• Design: 1 NO 1 NC
• Design: flat head
• No. of pins: 1
• Colour: red
• Connection: Pin 1.8 x 0.4 mm
• Impact resistance: IK09
• Drilling diameter: 16 mm
• Switching voltage: 3 A, 250 V
• Weight: 0.016 kg
• Design: 1 NO 1 NC
• Design: flat head
• No. of pins: 1
• Colour: yellow
• Connection: Pin 1.8 x 0.4 mm
• Impact resistance: IK09
• Drilling diameter: 16 mm
• Switching voltage: 3 A, 250 V
• Weight: 0.016 kg
Throughput and branch connections possible
Flat nose pliers are sufficient for manipulating
Print connector with connecting pins
• Design: 1 NO 1 NC
• Design: flat head
• No. of pins: 1
• Colour: green
• Connection: Pin 1.8 x 0.4 mm
• Impact resistance: IK09
• Drilling diameter: 16 mm
• Switching voltage: 3 A, 250 V
• Weight: 0.016 kg
- 3.5-mm plug
- 3.5-mm plug
- Nickel-plated
- 2.00 m
- Round
- PVC
- Black
- Cable holder type FB2 (loose) for flat roofs
- Roof conductor holder, for flat roofs for fastening round conductors on flat roofs
- with double cable bracket type FB2
- made of frost-resistant concrete and
- weather-resistant plastic, UV-stabilized
- Plastic and concrete parts can be recycled separately
- Cable routing: loose
- Cable holder material: plastic
- Cable holder mounting Rd: 8 mm
- Weight: 1 kg
- Stone: Concrete (C35/45)
• Design: 1 NO 1 NC
• Design: flat head
• No. of pins: 1
• Colour: yellow
• Connection: Pin 1.8 x 0.4 mm
• Impact resistance: IK09
• Drilling diameter: 16 mm
• Switching voltage: 3 A, 250 V
• Weight: 0.016 kg
• Design: 1 NO 1 NC
• Design: flat head
• No. of pins: 1
• Colour: black
• Connection: Pin 1.8 x 0.4 mm
• Impact resistance: IK09
• Drilling diameter: 16 mm
• Switching voltage: 3 A, 250 V
• Weight: 0.016 kg
- No cutting depth adjustment required
- Extra blade for longitudinal cut
- 3 stripping notches for stripping conductors
- With pocket clip
- Working range: max. 12 mm 1/2'' width
Conductors:
- mm² 0,8 1,5 2,5
- AWG 18 16 14
• Design: 1 NO 1 NC
• Design: flat head
• No. of pins: 1
• Colour: green
• Connection: Pin 1.8 x 0.4mm
• Impact resistance: IK09
• Drilling diameter: 16 mm
• Switching voltage: 3A, 250V
• Weight: 0.016 kg
(colour may vary)
TWIST 2 Metallic cover plate in stainless steel look, round 2xUTE France sockets black with increased touch protection 2.0m H05VV-F 3G1.5mm² black supply cable with wire end sleeves and enclosed protective contact mounting plug packed in a box
