REICHELT IE: Indoor climate accessories
The Best
Quiet axial fans with ball bearings and automatic blinds
Innovative, quiet and energy-saving axial fan with a stylish design for permanent ventilation of sanitary areas, shower rooms, kitchens and other domestic areas.
Installation in the ventilation duct or connection to ventilation pipes
Compatible with ventilation pipes with diameters of 100, 125 and 150 mm
The built-in thermal actuator ensures smooth opening and closing of the motor-operated shutter flaps (automatic blind - opens after approx. 30 seconds of operation), which prevent return air flow
The housing and impeller are made of high-quality, robust and UV-resistant ABS plastic
Reliable motor with low energy requirements
Built-in overheat protection
Maintenance-free continuous operation
Suitable for wall and ceiling mounting
Simple assembly (screws)
Top Pick
- Simple installation
- Gentle on valves
- Quiet operation
- Compact design
- Intuitive operation
- Preset comfort and economy times for quick start
- 9 heating and economy times can be set
- Each day can be set individually
- Automatic setting of summer and winter time
- Vacation function
- Window open detection
- Frost protection function
- Child lock
Excellent
any risks with warm water preparation and trust the reliable protection function of this safety temperature limiter.
The limiter immediately switches off the heating system when the previously set critical temperature has been reached.
The re-commissioning of the cooled heating is only possible after the manual release of the limiter.
Switching voltage: Max. 250 V
Switching current: 16 (2.5) A
Safety temperature: adjustable from 90 - 110°C
Length of capillary tube: 1,000 mm
Dimensions: (Ø x L): 6.5 x 95 mm
Recommended
For installation in the control cabinet
• Serial installation device for the DIN rail
• 17.5 mm wide
• With variable switching threshold of 0 to +60°C
• 1 closed contact for 10A
• Bi-metal snap-action contact
• Blue adjustment knob
Featured
Das Heizkörperthermostat Comet Plus ist der Nachfolger, die neue Designvariante, seines Vorgängers Sparmatic Comet. Das digitale Thermostat besitzt eine hochwertige Metallmutter, die für eine längere Lebensdauer und einen noch besseren Halt des Comet Plus sorgt.
Das elektronische Heizkörperthermostat Comet Plus ist individuell programmbierbar. Pro Tag sind vier Heiz- und vier Sparzeiten einstellbar. Die Einstellungen können direkt am Comet Plus oder noch komfortabler mithilfe des PROGmatic-Programmiersticks (nicht im Lieferumfang enthalten, als Zubehör erhältlich) am PC vorgenommen werden. Trotz programmiertem Heizprofil kann die Temperatur jederzeit auch manuell am Thermostat eingestellt werden.
Dank der Fenster-offen-Erkennung erkennt Comet Plus wenn ein Raum gelüftet wird und schließt das Ventil des Heizkörperthermostats sofort, um Energie zu sparen. Das Ventil wird erst wieder bei einem Temperaturanstieg bzw. nach einer individuell einstellbaren Zeit geöffnet.
Durch die verschiedenen Funktionen des Comet Plus lassen sich Heizkosten von bis zu 30% sparen.
- äußerst kompakter Energiesparregler
- sehr stabile Gehäusebauform
- stabile Metallüberwurfmutter
- ventilschonend durch Eurotronic-Ventilschutz
- einfache Bedienung
- einfache Montage
- geräuscharmer Lauf
- bis zu 30% Heizkosten sparen
- Heiz- und Sparzeiten individuell einstellbar
- Tages- oder Wochenzeiten einzeln programmierbar
- 8 Heizperioden programmierbar
- Fenster-Offen-Erkennung
- Handverstellung jederzeit möglich
- automatische Sommer-/Winterzeitumstellung
- Urlaubsfunktion
- Kindersicherung
- Frostschutzfunktion
- Kalkschutzfunktion
Alternative
- Always know when to ventilate
- Ideal for preventive air quality monitoring at home, at school, in the hospitality industry or at work
- Create a good living environment with healthy indoor air
- Professional NDIR sensor with a service life of 10 years
- Accurate and stable NDIR measurements over a long period of time
- CE marking and ISO certification EN 61326-1:2013
- Color display for air quality (green/orange/red)
- Alarm signal for poor indoor air (red light)
- Displays the amount of carbon dioxide (CO2) in ppm
- Automatic calibration
The Alecto AQ30 CO2 meter is a professional air quality meter that specifically measures the concentration of carbon dioxide (CO2) in the air.
The CO2 content is a good indicator of the air quality in the home. And a measuring device ensures good ventilation in rooms where people are present.
Good air quality is important for our health and well-being. This CO2 meter gives you an overview of the air quality and you always know when you need to take action. Ideal for ensuring healthy air at home, at school or at work.
Not only does the professional NDIR sensor measure the CO2 value, it also measures the relative humidity (RH) and temperature. In this way, you can always keep an eye on the indoor climate and know exactly when you need to ventilate.
High-quality NDIR sensor
The Alecto AQ30 air quality measuring device has an extremely accurate NDIR sensor of outstanding quality. This guarantees you an accurate and stable NDIR measurement for a long time. This CO2 measuring device is certified according to ISO EN 61326-1:2013 and was developed in accordance with the 2014/30/EU standard. Reliability and safety are paramount.
The AQ30 CO2 measuring device meets all the requirements of the building regulations. This means not least that the CO2 measuring device works permanently with electrical mains voltage, calibrates itself automatically and is equipped with 3 color codes. For this reason, monitoring is not wireless. However, this carbon dioxide meter has an integrated backup battery that ensures that the data is retained if the AQ30 is removed from the mains and moved to another location.
Traffic light color display for air quality
The current CO2 content can be read immediately on the LCD screen of the Alecto AQ30. The practical traffic light color display makes it easy to interpret the values. Green (everything is OK), orange (improvement possible) or red (unhealthy, too high). If the carbon dioxide level is too high, an alarm signal sounds. You can set the lower limit and the upper limit yourself, i.e. the values at which the LED display lights up green, orange or red.
Is CO2 dangerous?
CO2 is neither flammable nor poisonous. However, a large amount of...
Automatic and convenient control of the room temperature by heating according to demand
The Homematic IP radiator thermostat - basic is part of the Homematic IP smart home system and actively helps to save energy. The smart controller replaces conventional radiator thermostats, allowing energy savings of up to 30 %.
The thermostat is mounted on the radiator without interfering with the heating system and without tools. Power is supplied by two AA batteries, which can provide energy for about 2 years. The radiator thermostat is ready for immediate use thanks to a preset heating profile - this can be manually adjusted at any time if required. Individual temperature profiles with up to 13 changes are possible per day. In this way, Homematic IP only heats certain rooms when there is a real need.
Setup can be done flexibly on the device itself, via the Homematic IP app (in conjunction with the Homematic IP Access Point) or via a browser-based interface (in conjunction with a CCU3 central controller).
Via the app, the radiator thermostat can be integrated into a comprehensive smart home system. For example, the cloud solution allows the temperature to be set at any time from any location. Those who prefer to know the data locally in the home network, but still want to benefit from the advantages of a smart home system, can resort to the setup via the central CCU3.
Stand-alone operation (push-to-pair):
- Manual operation and configuration possible directly on the device, e.g. setting the heating profile, vacation mode, temperature changes and triggering the boost function
- Direct teach-in of up to eight window and door contacts with magnet (HmIP-SWDM) for automatic lowering of the room temperature during ventilation
In the Smart Home with the Homematic IP Access Point or the CCU3 central controller:
- Configuration and control via the free Homematic IP smartphone app or the local user interface WebUI.
- Combination with a wide range of Homematic IP devices for extended functionality
Placed on the table or mounted on the wall: The thermo-hygrometer in elegant design measures temperature and humidity in living rooms, offices and commercial premises constantly and reliably.
With the testo 623 thermo-hygrometer, you are relying on a reliable monitoring monitor for the indoor climate. The intervals at which the device displays the measured values can be set by the user, this ranges from a minimum of 5 min to a maximum of 24 hours. The values of the last 90 days are automatically stored. The integrated alarm function can be used to show when limit values are reached.
The current values, date and time can be seen at any time on the large display, as well as the statistics of the last 90 days. Thus, the long-term analysis of the room climate is possible at any time without any problems - completely without data transmission and evaluation on the PC. The long-term stable sensor guarantees long-lasting quality - so that you can still rely on the reliability of your thermo-hygrometer in a few years.
Whether the thermo-hygrometer stands on the table or sideboard like a picture frame, or whether it hangs on the wall, you decide: Both is possible, mounting material is included in the delivery.
Product advantages:
- Measures temperature and humidity in the room and indicates when limit values are reached using the alarm function
- Large display: current values and statistics of the last 90 days at a glance
- Long-term stable sensor - for long-lasting measurement quality
- with mounting and hanging device - mounting material included
Technical features:
Temperature - NTC
- Measuring range: -10 to +60 °C
- Accuracy: ±0.4 °C
- Resolution: 0.1 °C
Humidity - Capacitive
- Measuring range: 0 to 100 %RH*
- Accuracy: ±2 %RH + 1 digit at +25 °C (10 to 90 %RH), ±3 %RH
General technical data:
Operating temperature: -10 to +60 °C
Measuring cycle: 20 s
Protection class: IP30
EU/EC directives: 2004/108/EC
Battery type: 4 x AA type mignon cells
Battery life: 12 months
Scope of delivery: The testo 623 thermo-hygrometer including batteries, calibration protocol and mounting material."
This all-in-one filter system helps control cooking and cleaning odors and reduces airborne volatile organic gases (VOCs) such as ammonia, acetone and formaldehyde.
In addition, the HEPA filter captures 99.97% of common airborne contaminants.
This combination filter has 3 levels of filtration to defend against odors and volatile organic gases in the air:
- a durable mesh pre-filter
- a 3-layer activated carbon pellet filter
- a HEPA filter
The filter drum is the heart of the air purification system.
To maintain the optimal performance of your air purifier, it is recommended to replace the HEPA filter drum every 12 months (depending on the duration of use).
Compatible with:
Leitz TruSens Z-1000 air purifier (item LEITZ Z-1000EU).
Leitz replacement activated carbon filter odors & VOC (item LEITZ 2415120).
Package contents:
- 1x mesh pre-filter
- 1x activated carbon filter
- 1x HEPA filter
1 x HEPA H13 und Aktivkohle- und Kaliumpermanganat-Hauptfilter
5 x Vorfilter
""Breitband-Gasfilter-Set für ZeroSmog-Guard-Geräte
ZeroSmog-Guard-Light
ZeroSmog-Guard
ZeroSmog-Guard 2
Filtert 99,95 % der Partikel
Vielseitiger Filter, der eine Vielzahl von Gasen extrahiert""
ePM1-75 %-Vorfilter der Klasse (5er-Pack) entfernen größere Partikel, wodurch die Nutzungsdauer des Hauptfilters verlängert wird.
Der Hauptfilter besteht aus einem HEPA-Partikelfilter der Klasse H13 sowie einem Gasfilter, der aus einer Mischung aus Aktivkohle und Kaliumpermanganat-Granulat besteht.
99,95 % aller Partikel werden aufgefangen"
This all-in-one filter system helps control cooking and cleaning odors and reduces airborne volatile organic gases (VOCs) such as ammonia, acetone and formaldehyde.
In addition, the HEPA filter captures 99.97% of common airborne contaminants.
This combination filter has 3 levels of filtration to defend against odors and volatile organic gases in the air:
- a long-lasting mesh pre-filter
- a 3-layer activated carbon pellet filter
- a HEPA filter
The filter drum is the heart of the air purification system.
To maintain the optimal performance of your air purifier, it is recommended to replace the HEPA filter drum every 12 months (depending on the duration of use).
Compatible with:
- Leitz TruSens Z-2000 air purifier (item LEITZ Z-2000EU)
- Leitz TruSens Z-2500 air purifier (article LEITZ 2415138)
- Leitz replacement activated carbon filter odors & VOC (article LEITZ 2415124)
Package contents:
- 1x mesh pre-filter
- 1x activated carbon filter
- 1x HEPA filter
The radiator thermostat Comet Plus is the successor, the new design variant, of its predecessor Sparmatic Comet. The digital thermostat has a high-quality metal nut, which ensures a longer life and an even better hold of the Comet Plus.
The Comet Plus electronic radiator thermostat can be programmed individually. Four heating and four saving times can be set per day. The settings can be made directly on the Comet Plus or even more conveniently on a PC using the PROGmatic programming stick (not included, available as an accessory). Despite the programmed heating profile, the temperature can also be set manually at the thermostat at any time.
Thanks to the window-open detection, Comet Plus recognizes when a room is being ventilated and immediately closes the valve of the radiator thermostat to save energy. The valve is only opened again when the temperature rises or after an individually adjustable time.
The various functions of the Comet Plus can save heating costs of up to 30%.
- extremely compact energy saving controller
- very stable housing design
- stable metal union nut
- gentle to valves due to Eurotronic valve protection
- easy operation
- easy mounting
- low-noise operation
- save up to 30% heating costs
- heating and saving times individually adjustable
- daily or weekly times individually programmable
- 8 heating periods programmable
- Window open detection
- manual adjustment possible at any time
- automatic summer/winter time changeover
- Vacation function
- Child lock
- frost protection function
- Limescale protection function
- regulates the room humidity independently and contributes to a healthy living climate
- actively supports the prevention of mould on walls and windowsills
- Installation possible with almost all windows
- Product can be glued or screwed
- constant ventilation of the rooms
- Function even when the window is closed
- can be closed at any time
- simple assembly in only 5 minutes
- ideal also for tenants
- no additional power supply is required, functionality is based on air pressure differences
- Burglar resistance of the window is not affected - Installation from the inside
- Waterproof against driving rain up to 150 Pa
- including cutter knife and fastening tape
- Individual room-by-room temperature control
- Rooms can be heated efficiently via floor surfaces
- Rooms can be cooled via floor surfaces
- No cabling work required thanks to secure 868.3 MHz/869.525 MHz wireless technology
- Controls underfloor heating systems and circulation pumps (through an additional switching relay)
- Automatically provides a continuous flow of heating water, ensuring a constant and efficient utilisation of the central heating system
- Optimum start/stop function for extra convenience: The right temperature at the desired time
- Several underfloor heating actuators can be used in one house
- Connection to the Homematic IP Multi IO Box for controlling boilers or switching between heating and cooling
- Screwless plug-in/clamp connection technology
- Easy installation with screws provided or via rail mounting
- Most advanced control algorithms for all types of water-based floor heating systems
- Flexibility: Stand-alone operation in connection with the Homematic IP wall thermostat (HmIP-WTH-2), Homematic IP Access Point and Homematic IP app, as well as the Homematic CCU2 central control unit or control units from partner companies
In System M, surfaces and materials can be combined to a virtually infinite degree. The frames and rockers can be easily replaced, as the inserts do not have to be changed. This makes System M one of the most flexible switch ranges that adapts to all design requirements.
- Ideal for gas barbecues, camping stoves, lamps and heaters
- With pressure gauge, thermal safety valve and overpressure safety device
- Designed for indoor use
- For connection to 5 and 11 kg gas cylinders (with DE connection)
- Inlet: Small cylinder (KLF) - G.12 threaded connection
- Outlet: H.4 threaded connection (G 1/4"" LH)
- Robust materials for a long service life
The CFH DR 414 gas pressure regulator (item no.: 52414) is the premium solution for the safe operation of camping appliances. Thanks to two-stage pressure regulation, the gas cylinder pressure is reliably reduced to 50 mbar, ensuring a constant and safe gas supply. The integrated pressure gauge enables the gas line to be checked for leaks, while the thermal safety valve and the overpressure safety device provide additional protection. Suitable for LPG (propane, butane and their mixtures) and compatible with 5 and 11 kg gas cylinders (DE connection). With a nominal flow rate of 1.5 kg/h and an inlet pressure range of 0.3-16 bar, the regulator meets the highest safety standards.
Scope of delivery: DR 414 gas pressure regulator
Matching products: CFH camping appliances"
The CO2 meter is used to assess the risk of infection by aerosols.
The CO2 concentration (carbon dioxide) is considered an indicator of the aerosol content of the room air and is thus an indication of potential exposure to viruses (e.g. Covid19 etc.).
The CO2 traffic light measures and monitors the CO2 concentration (carbon dioxide) and thus the air quality.
Since CO2 is colorless and odorless, too high a load in the air is not immediately noticeable.
This quickly leads to loss of concentration, dizziness and headaches.
The CO2 sensor can be easily positioned on the table or alternatively hung on the wall.
The CO2 detector is perfect for all indoor areas, such as in the home, school, office, kindergarten or public facilities.
The traffic light display allows you to quickly read how the current air quality is.
In addition, the room air meter emits an acoustic alarm signal as soon as the limit value (1400 ppm) is exceeded.
Normal operation is via a supplied power supply unit, otherwise the carbon dioxide detector can be operated without a power supply unit for up to 12 h by the integrated battery.
The CO2 alarm continues to convince with the following features:
- With traffic light display and alarm signal for quick assessment of the indoor air quality and the need for ventilation.
- Measurement of CO2 concentration, air temperature and humidity
- With high-quality NDIR sensor (measuring accuracy +/- 50 ppm)
- 12 h operation without power supply due to integrated battery
Package contents:
- 1x CO2 detector C2M L 4050
- 1x DC 12 V power supply unit
- 2x screws
- 2x dowels
- 1x instruction manual
Indoor climate accessories REICHELT IE Best Products
Sophisticated room thermostat with option of remote control via mobile phone. Short SMS messages are used for remote control, changing the temperature or turning off the system.
PT32 GST is a digital room thermostat with an integrated GSM module. The room thermostat is intended for all boilers that require a potential-free contact (e.g. gas boilers, electric boilers, heating circuit pumps, actuators or air conditioners).
The novelty is the PID control - it is the most accurate continuous control, and not only allows us to achieve a short control time, but also high precision without residual control deviation.
Advantages of the PT32 GST:
• 9 weekly programmes
• 6 temperature changes for each day
• Programme intervals of 10 minutes and 0.5°C
• Programme by individual days or Mon-Fri, Sat-Sun and Mon-Sun
• Large, clearly arranged display with illumination
• Intuitive control in the selected language combination (CZ/PL/EN/DE/RU/SVK)
• Choice of the hysteresis, PI-, PID control
• Function for switching the heating on early
• Option for connecting an external sensor
• Selection of heating/cooling mode
• Short-term temperature change option
• Manual mode (MANU)
• Permanent switching off (OFF)
• Holiday mode
• Option of choosing even and odd weeks
• Correcting the current temperature is possible
• Keyboard lock
• Operating hours counter
• Automatic boiler maintenance display
• Frost protection (3°C)
• Function TEST
• Automatic time adjustment from summer time to winter time
• Password for service technician
• Power supply: 5 V/DC, 2.5 A, AD05-type jack (included in delivery)
• Saves the time in the event of power failure, batt. 2 X 1.5 V/AA (not included in the delivery)
• Output (potential-free contact) max. 5 A/250 V AC
TECHNICAL PARAMETERS
Supply 5 V/DC, 2.5 A, AD05-type jack
GSM module SIM 900
Antenna direct 1 dB, SMA connector
Adjustable temperatures 6 different temperatures per day
Hysteresis 0.1°C to 6°C
Activation element Relay
Minimum programming time 10 minutes
Adjustable temperature range +3°C to +39°C
Setting the temperatures per 0.5°C
Minimum display jump 0.1°C
Measurement accuracy ±0.5°C
Service life of the batteries Heating season
Saving the time 2x 1.5 V alkal. batteries AA (not included in the delivery)
Protection class IP20
Output Max. 5 A
Operating temperature 0°C to +40°C
This activated carbon pellet filter provides a protective barrier against unwanted odors & volatile organic gases (VOCs) that can enter your home.
This carbon layer is specifically designed to remove these pollutants from the air, and is compatible with the Allergy & Flu HEPA filter drum for the Leitz TruSens Z-3000 / Z-3500 air purifiers. (Article LEITZ Z-3000EU / Article LEITZ 2415139).
Note
To keep your air purifier working optimally, it is recommended to replace the Allergy & Flu activated carbon filter every 3 months (depending on the duration of use).
Package contents:
- 1x activated carbon filter
- PM 2.5 and PM 10
- Traffic light function
- Graphical representation
- Battery and mains operation
- Measurement of temperature and humidity
Product benefits:
The PCE-RCM 10 air quality meter measures dust levels in the magnitudes PM 2.5 and PM 10. The measured values of the air quality meter are shown on a brilliant colour display. The particulates measured by the PCE-RCM 10 air quality meter are respirable in the order of magnitude PM 2.5, can be deposited there and damage the lungs.
The air quality meter is very well suited for orienting measurements at workplaces that may be contaminated with dust. The measured values are shown on the colour display in the colours green, yellow, red and pink. This 'traffic light' function of the air quality meter makes it easy to recognise the limit values and allows you to react quickly to changes. With the ''graphical display of measured values'' setting you can view the changes in measured values over a period of 3 minutes."
The Cetrotec flue gas temperature monitor type 519 with 40°C switching point and 10 k resistor is approved for use in heat-generating systems and is mounted with a flange on a free piece of stove pipe with a diameter of at least 120 mm.
Its normally open contact is only intended for control tasks and has been bridged by us with a 10 kOhm cable breakage protection resistor, which is why this version of the temperature monitor is only suitable as an optional accessory for our KDS cable exhaust air control systems, in order to activate an exhaust air system when the stove is cold without having to open a window every time, provided the approval of the master chimney sweep is available, as an exhaust air control system in combination with an exhaust gas temperature monitor does not have DIBt approval.
- Approved for use in heat-generating systems, TÜV tested in accordance with DIN EN 14597_2012-09
- Intrinsically safe design, maintenance-free with simple installation on the flue pipe
- NO contact with pre-mounted 10k cable break protection resistor, especially for KDS 110 and 116
- Approved medium temperature 500°C, max. 180°C on cable and switch head
This flue gas temperature monitor refined by Elektrotechnik Schabus is specially designed for use with the KDS cable exhaust air control systems.
The KDS systems distinguish a deliberately open contact from a cable break with the help of a parallel-connected resistor of around 10 kOhm.
The window contact and exhaust gas temperature monitor are connected in series.
The negative state (window closed, oven burning) is produced by the closed contact, the positive state (window open or oven cold) causes the control line to become highly resistive.
It is therefore not always necessary to open a window to operate the extractor hood, even though the oven may only be in operation very rarely.
The pre-assembled 2 meter long temperature-resistant silicone cable can be extended with any 2-core cable if the heat range was reliably left during installation.
Possible applications
- Monitoring tasks to switch off the exhaust air system in rooms with open or closed fireplaces to prevent exhaust gases from being sucked back into the rooms when the fireplace is burning
- Other monitoring and control tasks, such as controlling the storage loading pump in conjunction with KDS devices
Note
Involve your chimney sweep in your planning before ordering so that nothing stands in the way of approval afterwards.
There are significant regional differences over which Elektrotechnik Schabus has no influence."
You can select the following units on the testo 510 differential pressure gauge: Pa, hPa, mbar, mmH2O, mmHg, inH2O, inHg, psi, m/s, fpm. You can also measure the flow in the ventilation duct with an optionally available pitot tube - from 10 to 100 m/s.
Exact: For accurate measurements, the differential pressure measurement is temperature and air density compensated.
Uncomplicated: Small, handy and easy to operate with only three buttons.
Clever: Thanks to magnets on the back of the device you can work hands-free. In poor visibility conditions such as dark surroundings, the illuminated display makes your work easier.
Secure: The differential pressure gauge is safely stored in a belt pouch with a clip-on protective cap, and thanks to a hand loop, it is also well secured during measurement.
Ready to start: The silicone connection hose is included in the testo 510 set. So you can start your measurement directly.
Product benefits:
- Differential pressure measurement from 0 to 100 hPa
- Magnets on the back of the device allow hands-free operation
- 10 units for selection, display in Pascal selectable
A power consumer can be directly connected to the integrated outlet of the thermostat, which then switches it on at the preset temperature.
The device can be used as a stand-alone device, such as for frost protection or with central heating, air-conditioning or incubator equipment, but it can also be used as a replacement for defective mechanical thermostats or digital thermometers.
- For wall mounting
- Temperature sensor PT 1000 (not included with delivery)
- Switching temperature of -99°C to +850°C freely adjustable
- Min./max. display
- Serial interface for reading out the measured data (optional)
- Unmanned and unsupervised operation
- Sensor short circuits and open circuits are detected immediately
- Output switches off in the event of a sensor error
- Adjustable to heating or cooling
- LED displays for relay on, heating (red), cooling (yellow)
- Data retention in the event of a power failure
Technical data:
- Operating voltage: 230 V AC
- Output voltage: 230 V AC, max. 16 A
- Power consumption: approx. 2 VA
- Switching power: max. 3,000 W
- Measurement input: Pt1000 (2-wire)
- Accuracy: <0.5% FS ± 0.1°C
- Resolution: 0.1°C
- Protection class: IP 20
- Ambient temperature of the device: -15°C to +50°C
- Dimensions (L x W x H): 160 x 80 x 60 mm
Breathe cleaner air with a filter that helps eliminate pet hair and odors.
This combination filter features 3 filter stages specifically designed to combat pet odors, dander, pet hair and dust.
The all-in-one filter system combines:
- a washable pre-filter
- a HEPA filter
- a 2-layer activated carbon filter
In addition to common household allergens and pollutants, this filter drum captures 99.97% of airborne pet dander.
The filter drum is the heart of the air purifier.
To maintain the optimal performance of your air purifier, it is recommended to replace the HEPA filter drum every 12 months (depending on the duration of use).
Compatible with:
- Leitz TruSens Z-1000 air purifier (item LEITZ Z-1000EU).
- Leitz replacement activated carbon filter pet (article LEITZ 2415128).
Package contents:
- 1x Washable pre-filter
- 1x HEPA filter
- 1x Activated carbon filter
For an optimal performance of your air purifier, the filter change is essential.
The activated carbon filter removes certain gases and odours from the air.
The activated carbon filter not only traps odours and gases, but also provides the first barrier against dust and pet hairs.
This fleece must be replaced on the drum of the HEPA filter.
For best results, replace the activated carbon filter every 3 months.
On the air purifier, the indicator light shows when the filter needs to be replaced.
Compatible with Leitz TruSens Z-3000 air purifier
The smallest and very quiet head for radiators with new design and clear backlit display. Allows you to set the weekly program (8 time section and two temperatures on each day). It uses a continuous control and other features that contribute to greater energy savings.
Advantages HD13-L:
- large, clear, backlit (orange) display
- for each day a different temperature program
- possibility of setting 2 temperature levels
- is adapting itself automatically to the valve
- information about the current temperature program
- valve opening indication in %
- automatic protection against lime
- autom. lock valve when the temperature drops sharply in the room (window is open)
- frost protection
- easy controlling and programing
- short-term change of temperature or function BOOST
- automatic conversion summer / winter time
- low-voltage indicator
- regulating the temperature by 0.5°C
- regulates the room humidity independently and contributes to a healthy living climate
- actively supports the prevention of mould on walls and windowsills
- Installation possible with almost all windows
- Product can be glued or screwed
- constant ventilation of the rooms
- Function even when the window is closed
- can be closed at any time
- simple assembly in only 5 minutes
- ideal also for tenants
- no additional power supply is required, functionality is based on air pressure differences
- Burglar resistance of the window is not affected - Installation from the inside
- Waterproof against driving rain up to 150 Pa
- including cutter knife and fastening tape
Save up to 30% on heating costs with the electronic energy-saving controller, programmable manually or conveniently using the progmatic stick (optional)
""Made in Germany
New additional features:
- extremely low-noise gearbox
- Significantly longer battery life - 5 years
- very compact design
- Smaller than a conventional thermostatic head
- Intuitive operation thanks to optimized menu structure
- even easier to install thanks to click lock
- Can be programmed manually or via (optional) stick
- Save up to 30% on heating costs
- Simple installation without tools, without dirt
Simple programming allows you to set 4 desired heating times and 4 desired economy times, as well as two different target temperatures.
The device is pre-programmed and fits all common radiator valves. (incl. 3 adapters)
Manual adjustment possible at any time: manually selected temperature has priority until the next program period
Multi-stage ""open"" window detection: e.g. if the temperature changes by -1.5°C within 2.5 minutes, the valve closes automatically and opens again after a programmable time or when the temperature rises.
Weekly timer:
- 8 individually programmable switching points / day
- Corresponds to 4 heating times and 4 economy times per day
- Each day of the week can be programmed individually
- Minimum switching interval 10 minutes
- daily block formation
- Automatic summer/winter time changeover
- Frost protection function
- Limescale protection function
- Child safety lock
- Window ""open"" detection
- Vacation function
- Manual adjustment possible at any time
Factory-set basic program:
- from 7:00 a.m. 21° C
- from 22:00 16° C
also programmable via stick on the PC (stick optional - see accessories)
- Control range: 8° C to 28° C
- Additional valve open / on and valve closed / OFF
- Response sensitivity: 0.1° C
- Self-test: 1 x weekly
- Batteries: 2x AA Mignon (not included - see accessories)
- Battery life: typically 5 heating periods
The brennenstuh®Connect Zigbee radiator thermostat impresses with its quality and safety in all areas, saves energy and increases comfort at the same time.
Because now you can heat cleverly and smartly: regulate the room temperatures with our free brennenstuhl®Connect app worldwide via the individual programming of heating times of temperature values from 5-30°C.
In this way, you adapt heating phases in the individual rooms exactly to your needs and can save up to 30% on heating costs thanks to the intelligent heating control.
Because thanks to the window-open function, the smart home thermostat automatically lowers the temperature.
It not only ensures your personal comfort temperature, but also impresses with the following features:
- Automatic operation (via app) or classic manual operation possible.
- For the setup and control of the radiator thermostat, the Brennenstuhl Zigbee gateway is required
- actual / set temperature query
- with color LCD display
- Battery life: approx. 1 year
- incl. battery 2 x 1,5 AA Mignon
Notice:
For the setup and control of the smart home thermostat, the brennenstuhl®Connect Zigbee gateway Art. No. BRE 1294060 is required
Package contents:
- 1 x radiator thermostat incl. locking ring
- 1x adapter set RA, RAV, RAVL
- 2x batteries 1,5V AA/Mignon/LR6
- 1x manual
This activated carbon pellet filter provides a protective barrier against unwanted odors & volatile organic gases (VOCs) that can enter your home.
This carbon layer is specifically designed to remove these pollutants from the air, and is compatible with the Allergy & Flu HEPA filter drum for the Leitz TruSens Z-2000 / Z-2500 air purifiers. (Article LEITZ Z-2000EU / Article LEITZ 2415138).
Note
To keep your air purifier working optimally, it is recommended to replace the Allergy & Flu activated carbon filter every 3 months (depending on the duration of use).
Package contents:
- 1x activated carbon filter
This 3 layer activated carbon pellet filter provides an unprecedented level of protection against unwanted odors in your home.
The 3-ply activated carbon filter is specifically designed to combat common cooking and cleaning odors and reduce airborne volatile organic gases (VOCs) such as ammonia, acetone and formaldehyde.
It is compatible with the Odors & VOC HEPA filter drum for the Leitz TruSens Z-1000 air purifier (item LEITZ Z-1000EU).
Note
To maintain the optimal performance of your air purifier, it is recommended to replace the Odors & VOC activated carbon filter every 3 months (depending on the duration of use).
Package contents:
- 1x activated carbon filter
With red dome and glow lamp
With spring clamps for rigid wires up to 2.5 mm²
Connection terminals according to DIN VDE 0632 (EN 60669)
Plenty of room for wiring
Complete in form and function, weather- and extremely UV-resistant, and made of break-proof thermoplastic: The additionally splash-proof WG 800 series can be illuminated and can be labelled throughout, setting standards for professional electrical installation with plenty of space for wiring.
Intelligent energy-saving controller with WLAN radio standard
Comet WiFi revolutionizes the market of electronic wireless radiator thermostats with a new design and unprecedented functionality.
Thanks to the WiFi radio standard, the thermostat can be integrated into any 2.4 GHz WLAN network (successfully tested with 190 access points/WLAN routers) and can then be controlled from anywhere.
No additional gateway is needed anymore.
Simply download the Eurotronic app from the store and then conveniently control and configure your thermostat via the user-friendly app.
- Radio standard: WLAN
- Supply voltage: 2 x 1.5V AA/Mignon/LR6
- Radio frequency: 2.4 GHz
- Thread connection: M30 x 1.5 mm
- Control range: 8° C to 28° C
- Self test: 1 x weekly
The new Comet WiFi features real-time behaviour.
This means that changed heating times are immediately transferred to the Comet WiFi radiator thermostat, allowing you to adjust the temperature to your needs in seconds.
Compared to other radiator thermostats that work with radio standards such as ZigBee, Z-Wave, DECT, Bluetooth, Comet WiFi has the lowest power consumption.
Scope of delivery:
- 2x Comet WiFi energy-saving controller
- 4x LR6/Mignon/AA batteries
- Brief instructions DE/EN
- 6x adapters (2x Danfoss RA, 2x RAV, 2x RAVL)
Steckerthermostat mit WiFi und erweiterten Funktionen
TS11 WiFi Therm PROFI dient dazu, verschiedene Verbraucher nach der Solltemperatur (oder auch nur nach Zeit) zu schalten.
Zur Steuerung ist eine Internetverbindung erforderlich (nicht lokal steuerbar).
Nach der Programmierung funktioniert es auch ohne WiFi-Verbindung im autonomen Modus.
Bei einem Stromausfall speichert die Steckdose die Zeit bis zu 24 Stunden.
Nach Wiederherstellung der Stromversorgung regelt er auch ohne Internetzugang nach dem eingestellten Programm weiter.
Sie können folgende Modi verwenden:
- Zeitregelung/Temperaturregelung - arbeitet nach dem eingestellten Programm
- Zeitablauf - Änderung des Zustands auf eine festgelegte Zeit (1 Min. bis 24 Stund.)
- manuelle Änderung von der App
- manuell- mit der Taste an der Vorderseite des Produkts (nur im Zeitmodus )
Eigenschaften TS11 WiFi Therm PROFI
- Temperatur/ Zeitprogramm
- HEIZUNG/KÜHLUNG Modus
- FROSTSCHUTZ (einstellbar)
- geöffnetes Fenster Funktion
- Verbrauchsberechnung des angeschlossenen Gerätes
- Einfache Verbindung zu einem WI-FI-Heimnetzwerk.
- Geschaltete Phase
- MANU / AUTO Modus
- Timer- Funktion
- AUTO-Modus - entsprechend dem ausgewählten Programm
- Statusanzeige mit Hilfe zweier LEDs
- Bis zu 16 Änderungen im automatischen Modus an jedem Tag
- Temperaturmessung von -20° C bis 75° C
- Einschalten bis zu 16 A (3680 W)
- Das eingestellte Programm ist auch bei einem Ausfall der WiFi-Verbindung aktiv
- App für iOS, Android und Windows 10 zum kostenlosen Download in deutscher Sprache
- Taste zum manuellen Einschalten (nur im Zeitmodus)
The top-hat rail temperature switch HTS 1000 can measure the current temperature in the range from -99 degrees Celsius to +850 degrees Celsius (depending on the sensor used) in various media (air, water, oil, etc.) with the aid of a PT1000 temperature sensor.
Based on this measured value, a variety of temperature controls can be realized using 3 different functions (thermometer, cooling and heating).
Various consumers (e.g. fan heaters, air conditioning systems, alarm systems, etc.) can be controlled automatically and manually via two integrated, potential-free relays.
A clear OLED display provides constant (or time-limited) information about the current temperature, selected function and current switching status of the integrated relays.
Application examples:
- Replacement for defective thermostats in heating systems
- Replacement control for air conditioning systems
- Monitoring and control of temperatures, e.g. in the production of beers and spirits or
- Temperature-controlled ventilation in greenhouses
Features:
- Min. / max. display
- Hysteresis (switching accuracy) freely adjustable (0.1°C ... 10°C)
- Sensor monitoring (short circuit, interruption, A/D converter)
- Output switches off in case of sensor error
- Operation and monitoring-free operation
- Adjustable: thermometer, cooling, heating
- OLED display for current temperature, set function and switching states of the relays
- Data retention in the event of a power failure
- Automatic restart after power failure
- Dimensions (temperature switch): 90 x 72 x 72 mm
- Dimensions (temperature sensor): 50 x 6 mm
- Mounting on TS 35 top-hat rail / DIN mounting rail
Technical data
- Operating voltage: 230 V/AC, 50 Hz
- Power consumption (stand-by): approx. 0.3 W
- Switching capacity (total): max. 3000 W (230 V/AC, 13.0 A) for resistive loads, max. 750 W (230 V/AC, 3.2 A) for inductive loads
- Output (screw terminals): 2 x potential-free relays (changeover contact)
- Resolution: 0.1°C, 1 s
- Settings: 0.1°C, 1 s
- Measuring range (temperature switch PT 1000): -99°C to +850°C
- Measuring range (enclosed temperature sensor PT 1000): -50°C to +150°C
- Accuracy (temperature value): +/- 0,5%
- Protection class: IP20
- Sensor cable: 2 meters (can be extended up to 50 m)
- Operating temperature: -10 °C to 50 °C
Scope of delivery:
- HTS 1000 top-hat rail temperature switch
- PT1000 temperature sensor (cable length 2 m)
- Operating instructions German / English
- 25.5 mm with 4 notches
- 30.5 mm
- 34 mm with 4 notches
