TP-LINK TPLINK MC220L - 1000Base-SX/LX/LH > 1000Base-T converter
30.98 EUR
Examine the detailed sheet with complete information, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the production is done by MANUFACTURER NAME and the sale is managed by SELLER NAME.
Gigabit Ethernet media converter
• Complies with standards IEEE 802.3ab and IEEE 802.3z.
• The FX-port supports Hot-Swap
• Fibre-optic transmission distance of up to 0.55 km for the multimode fibre and 10 km for the single mode fibre.
The MC220L is a media converter designed for converting 1000BASE-SX fibre media into 1000Base-TX copper media and vice versa. The MC220L was designed according to the IEEE802.3ab 1000Base-T standard and the IEEE802.3z 1000Base-SX/LX/LH standard and is intended for use with multimode fibre-optic cables and the SC plug. It functions at 850nm for both transmitting and receiving data when using multimode fibre-optics and at 1310nm for both transmitting and receiving data when using a single mode fibre-optic cable.
Other features of this module include: the option of using the device as a stand-alone device (no enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, and status LED on the front. The MC220L transmits in fibre-optic long distance mode via the multimode fibre-optic cable up to a distance of 550 m and via a single mode fibre-optic cable up to a distance of 10 km.
- Standards and protocols: IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
- Basic function: Full duplex flow control IEEE 802.3x
Increases the fibre range to 0.5 km if a 50/125 µm fibre is used
- Ports: 1-Gigabit SFP-port
1000M RJ45 port (auto MDI/MDIX)
- Network media 1000BASE-T: Category 5 UTP cables, 5e (maximum 100 m)
EIA/TIA-568 100Ohm STP (maximum 100 m)
- Network media 1000BASE-FX: Multimode/single mode fibres
-LED display: PWR, LINK, RX
- Dimensions (LxWxH) 94.5 mm*73.0 mm*27.0 mm
Power supply: External voltage adapter
EAN: 6935364030476
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Gigabit Ethernet media converter
• Complies with standards IEEE 802.3ab and IEEE 802.3z.
• The FX-port supports Hot-Swap
• Fibre-optic transmission distance of up to 0.55 km for the multimode fibre and 10 km for the single mode fibre.
The MC220L is a media converter designed for converting 1000BASE-SX fibre media into 1000Base-TX copper media and vice versa. The MC220L was designed according to the IEEE802.3ab 1000Base-T standard and the IEEE802.3z 1000Base-SX/LX/LH standard and is intended for use with multimode fibre-optic cables and the SC plug. It functions at 850nm for both transmitting and receiving data when using multimode fibre-optics and at 1310nm for both transmitting and receiving data when using a single mode fibre-optic cable.
Other features of this module include: the option of using the device as a stand-alone device (no enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, and status LED on the front. The MC220L transmits in fibre-optic long distance mode via the multimode fibre-optic cable up to a distance of 550 m and via a single mode fibre-optic cable up to a distance of 10 km.
- Standards and protocols: IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
- Basic function: Full duplex flow control IEEE 802.3x
Increases the fibre range to 0.5 km if a 50/125 µm fibre is used
- Ports: 1-Gigabit SFP-port
1000M RJ45 port (auto MDI/MDIX)
- Network media 1000BASE-T: Category 5 UTP cables, 5e (maximum 100 m)
EIA/TIA-568 100Ohm STP (maximum 100 m)
- Network media 1000BASE-FX: Multimode/single mode fibres
-LED display: PWR, LINK, RX
- Dimensions (LxWxH) 94.5 mm*73.0 mm*27.0 mm
Power supply: External voltage adapter
EAN: 6935364030476
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
TP-LINK TPLINK MC210CS - 1000BaseTX>1000Base FX single mode converter
51.3 EUR
Gigabit Ethernet media converter• Complies with the standards IEEE802.3ab and IEEE802.3z.
• FX-port toggles between force and auto mode.
• Fibre-optic transmission distance of up to 15 km
The MC210CS is a media converter designed for converting 1000BASE-LX/LH fibre media into 1000Base-T copper media and vice versa. The MC210CS was designed according to the 1000Base-T standard (IEEE802.3ab) and the 1000Base-LX/LH standard (IEEE802.3z) and is intended for use with single fibre-optic cables and the SC plug. The MC210CS supports the long-wave (LX) laser specification for a transfer rate corresponding to the full bandwidth. It functions at 1310nm for both transmitting and receiving data.
Other features of this module include: the option of using the device as a stand-alone device (no enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, and status LED on the front. The MC210CS transmits inn fibre-optic long distance mode via the single mode fibre-optic cable over a distance of up to 15 km.
• Works at 1000 Mbps for both the TX port and also for the FX port in full duplex mode.
• TX port with support for auto MDI/MDIX
• Provides the switch configurations for force mode and auto transfer modes for the FX-port
• Fibre-optic transmission distance of up to 15 km.
• Easily visible LEDs display the status, allowing the network to be easily monitored.
• External power supply unit.
TP-LINK TPLINK MC200CM - 1000Base TX > 1000Base SC M.-mode converter
51.24 EUR
The MC200CM is a media converter designed for converting 1000BASE-SX fibre media into 1000Base-TX copper media and vice versa. The MC200CM was designed according to the IEEE802.3ab 1000Base-T standard and IEEE802.3z 1000Base-SX standard and is intended for use with multimode fibre-optic cables and the SC plug. The MC200CM supports the long-wave (LX) laser specification for a transfer rate corresponding to the full bandwidth. It functions at 850nm for both transmitting and receiving data.Other features of this module include: the option of using the device as a stand-alone device (no enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, and status LED on the front. The MC200CM transmits in fibre-optic long distance mode via the multimode fibre-optic cable up to a distance of 550 m.
• Complies with standards IEEE 802.3ab and IEEE 802.3z.
• Fibre-optic transmission distance of up to 0.5 km
TP-LINK TPLINK TLSM311LM - Mini GBIC (SFP), LC, 1 Gigabit/s, 1000 Base-SX
30.57 EUR
Multi-mode Mini GBIC ModuleThe fibreglass module cards of the TL-SM311 series were introduced to expand the transmission distance of your Managed/Websmart switches. These can expand the distance by several kilometres, or even by several dozen kilometres, which can basically cover the LAN's distance requirements. The user can choose as needed whether and which elements the fibreglass modules should use to lower the costs.
• Supports full duplex
• Plug-and-Play
• LED displays indicate the fibre module's operating status
• Supports pull or plug with switched-on switches
• Power: internal power supply of the switches
- Standards and protocols: IEEE 802.3z, CSMA/CD, TCP/IP
- Power supply: 3.3 V
- Cable: Multimode fibre
- Fibre type: 50/125 µm or 62.5/125 µm multimode
- Maximum cable length: 550 m
- Data rate: 1.25 Gbps
- Port type: LC
- Wavelength: 850 nm
TP-LINK TPLINK TLSM321A2 - Mini GBIC, 1000Base-BX
30.78 EUR
1000Base-BX WDM Bi-Directional SFP Module- Up to 20 km transmission distance with 9/125 µm SMF (Single-Mode Fiber)
- Bidirectional WDM communication on a single fiber
- Compatible with Small Form Pluggable Multi-Source Agreement (SFP-MSA)
- Supports Digital Diagnostic Monitoring (DDM)
- Hot-swappable module design
- Work with TL-SM321B as a pair
What This Product Does
TP-Link´s TL-SM321A adopts the latest standard 1000Base-BX, transmitting over one single-mode fiber with one different wavelength going in each direction.
Paired with TL-SM321B, You can extend the network distance up to 20Km with TP-Link´s routers, switches and media converters for reliable high-speed long-distance communication.
TP-LINK TPLINK TL-SM331T - Mini GBIC, 1000BaseT
40.95 EUR
1000BASE-T-RJ45-SFP-Modul- Supports 1000BASE-T operation in host systems
- Supports TX disable function
- For 100m range over UTP Cat 5e or higher cable
- Hot-pluggable SFP footprint functions
- Business safe operating temperature range: 0-70°C
- Complies with IEEE standard 802.3-2002
- All-metal housing for low electromagnetic interference
- Low power dissipation (0.5 W typical, 0.8 W max.)
Assured compatibility
TL-SM331T is compatible with various fiber devices from different vendors such as TP-Link, Cisco, Huawei, Ubiquiti, D-Link, Netgear and Mikrotik.
Package contents:
- 1000BASE-T RJ45 SFP Module TL-SM331T
- Manual
TP-LINK TPLINK TLSM311LS - Mini GBIC (SFP) LC, 1000 Base-LX
37.24 EUR
The fibreglass cards of the TL-SM311 series were introduced to expand the transmission distance of your Managed/Websmart switches. These can expand the distance by several kilometres, or even several dozen kilometres, which can essentially cover the LAN's distance requirements. The user can choose as needed which elements should use the fibreglass modules in order to lower costs.Single-mode Mini GBIC Module
Can be used with the devices TL-SG5412F/5428,TL-SL5428E,TL-SG3210/3216/3424/3424P,TL-SL3428/3452, TL-SG2210/2216/2424/2424P, TL-SL2210/2218/2428/2452, TL-SL1351 and MC200L.
TP-LINK TPLINK TLSM321B2 - Mini GBIC, 1000Base-BX
25.4 EUR
1000Base-BX WDM Bi-Directional SFP Module- Designed for on-site gigabit fiber communication
- Up to 2 km transmission distance with 9/125 µm SMF (Single-Mode Fiber)
- Bidirectional WDM communication on a single fiber
- Compatible with Small Form Pluggable Multi-Source Agreement (SFP-MSA)
- Supports Digital Diagnostic Monitoring (DDM)
- Hot-swappable module design
- Work with TL-SM321A-2 as a pair
What This Product Does
TP-LINK´s TL-SM321B-2 and TL-SM321A-2 is designed to work in a pair to create an on-site gigabit fiber communication up to 2km (2,000 meters).
With one single-mode fiber, the pair of modules can create a full-duplex gigabit path between your switches, storage devices, and server.
The TP-LINK´s TL-SM321B-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA).
As a WDM Bi-Directional optical transceiver, TL-SM321B-2 uses an integrated LC Bi-Directional optical interface connector and the data link is up to 2 km in 9/125 µm SMF (Single-Mode Fiber).
Also, TL-SM321B-2 incorporates the Digital Diagnostic Monitoring (DDM) feature which is compatible with SFF-8472.
DDM supports real-time monitoring of the transceiver, and shows parameters including the transceiver current which transmits/receives optical power and operating temperature.
TP-Link's TL-SM321B-2 is used for short-and medium distance fiber network in practice, and it provides fast and stable gigabit fiber connection for switches, routers, servers, etc.
TP-LINK TPLINK TLFC311B2 - Media converter, Gigabit Ethernet, SC, singlemode
40.91 EUR
Gigabit WDM Media Converter.- 1× Gigabit SC Fiber Port
- 1× 10/100/1000 Mbps RJ45 Port (Auto MDI/MDIX)
- Automatic negotiation of half-duplex/full-duplex transmission mode .
- Adopts WDM technology and transmits and receives data over a single fiber .
- Extends the fiber distance up to 2 km
TL-FC311B-2 is a gigabit media converter with a gigabit RJ-45 port and a gigabit SC fiber port that can convert between electrical and optical signals.
Long distance fiber optic data transmission can be applied to commercial scenarios such as parking security monitoring and wireless networking.
The TL-FC311B-2 uses Wavelength Division Multiplexing (WDM) technology, which allows data to be transmitted and received at distances of up to 2 km using only a single-mode optical fiber.
This saves customers half the cost of cable provisioning.
TL-FC311B-2 transmits data at a wavelength of 1310 nm and receives data at a wavelength of 1550 nm on one optical fiber.
Therefore, the terminal device used in conjunction with TL-FC311B-2 should transmit data with a wavelength of 1550 nm and receive data with a wavelength of 1310 nm.
TP-Link Another media converter TL-FC311A-2 is one of the products that can work together with TL-FC311B-2.
In addition, this media-converter can be used as a stand-alone device (no rack required) or with TP-Link's TL-FC1420 rack for auto-MDI / MDI-X in the TX port, in which the duplex mode is automatically negotiated.
TP-LINK TPLINK TFC311A20 - Media converter, Gigabit Ethernet, SC, Singlemode
40.91 EUR
Gigabit WDM Media Converter- 1x Gigabit SC port
- 1x RJ45 10/100/1000 Mbps (Auto MDI/MDIX)
- 9/125 µm singlemode fiber
- UTP Cat. 5, 5e cable (max. 100m)
- 1550 nm TX / 1310 nm RX
TL-FC311A-20 is a Gigabit media converter with a Gigabit RJ-45 port and a Gigabit SC fiber port, which can convert between electrical and optical signals.
Long distance fiber optic data transmission can be applied to commercial scenarios such as parking security monitoring and wireless networks.
- Automatically negotiates half-duplex / full-duplex transmission mode .
- Adopts WDM technology and transmits and receives data on a single fiber .
- Extends the fiber distance up to 20 km
In addition, this media converter can be used as a stand-alone device (no rack required) or with TP-Link's TL-FC1420 rack for Auto-MDI / MDI-X in the TX port, where duplex mode is automatically negotiated.
TP-LINK TPLINK TLFC311A2 - Media converter, Gigabit Ethernet, SC, singlemode
36.51 EUR
Gigabit WDM Media Converter.- 1× Gigabit SC Fiber Port
- 1× 10/100/1000 Mbps RJ45 Port (Auto MDI/MDIX)
- Automatic negotiation of half-duplex/full-duplex transmission mode .
- Adopts WDM technology and transmits and receives data over a single fiber .
- Extends the fiber distance up to 2 km
TL-FC311A-2 is a gigabit media converter with a gigabit RJ-45 port and a gigabit SC fiber port that can convert between electrical and optical signals.
Long distance fiber optic data transmission can be applied to commercial scenarios such as parking security monitoring and wireless networking.
The TL-FC311A-2 uses Wavelength Division Multiplexing (WDM) technology and helps transmit and receive data up to 2 km away with only a single-mode fiber, saving half the cost of cable deployment for customers.
TL-FC311A-2 transmits data at a wavelength of 1550 nm and receives data at a wavelength of 1310 nm on one optical fiber.
Therefore, the terminal device used in conjunction with TL-FC311A-2 should transmit data with a wavelength of 1310 nm and receive data with a wavelength of 1550 nm.
TP-Link Another media converter TL-FC311B-2 is one of the products that can work together with TL-FC311A-2.
In addition, this media converter can be used as a stand-alone device (no rack required) or with TP-Link's TL-FC1420 rack for Auto-MDI / MDI-X in the TX port, in which the duplex mode is automatically negotiated.
TP-LINK TPLINK TFC311B20 - Media converter, Gigabit Ethernet, SC, Singlemode
46.08 EUR
Gigabit WDM Media Converter- 1x Gigabit SC port
- 1x RJ45 10/100/1000 Mbps (Auto MDI/MDIX)
- 9/125 µm singlemode fiber
- UTP Cat. 5, 5e cable (max. 100m)
- 1310 nm TX / 1550 nm RX
TL-FC311B-20 is a Gigabit media converter with a Gigabit RJ-45 port and a Gigabit SC fiber port, which can convert between electrical and optical signals.
Long distance fiber optic data transmission can be applied to commercial scenarios such as parking security monitoring and wireless networks.
- Automatically negotiates half-duplex / full-duplex transmission mode .
- Adopts WDM technology and transmits and receives data on a single fiber .
- Extends the fiber distance up to 20 km
In addition, this media converter can be used as a stand-alone device (no rack required) or with TP-Link's TL-FC1420 rack for Auto-MDI / MDI-X in the TX port, where duplex mode is automatically negotiated.
TP-LINK TPLINK TL-SM321B - Mini GBIC, 1000Base-BX
29.54 EUR
1000Base-BX WDM Bi-Directional SFP Module - WDM Bi-Directional SFP Module
- Supports WDM Bi-Directional technology, using a single strand of fiber, cost saving
What This Product Does
TP-LINK´s TL-SM321B adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10Km with TP-LINK´s Routers, Switches, Media Converters to provide high speed and stability.
TP-LINK TPLINK TL-SM321A - Mini GBIC, 1000Base-BX
46.08 EUR
1000Base-BX WDM Bi-Directional SFP Module - WDM Bi-Directional SFP Module
- supports WDM Bi-Directional technology, using a single strand of fiber, cost saving
What This Product Does
TP-LINK´s TL-SM321A adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10Km with TP-LINK´s Routers, Switches, Media Converters to provide high speed and stability.
TP-LINK TPLINK TLFC111A2 - Media converter, Fast Ethernet, SC, Singlemode
28.5 EUR
10/100 Mbps WDM Media Converter- Complies with 802.3u 10/100Base-TX, 100Base-FX standards
- Auto-negotiation of Half-Duplex/Full-Duplex transfer mode
- 9/125 µm SMF (Single-Mode Fiber)
- Bidirectional WDM communication on a single fiber
- Ranges up to 20km (12.4 miles)
- Work with TL-FC111B-20 as a pair
What This Product Does
TL-FC111A-20 is a 100M media converter, providing a 100M RJ-45 port and a 100M SC fiber port, which can convert between electrical and optical signals.
And long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring and wireless networking.
How This Product Works
TL-FC111A-20 adopts WDM (wavelength division multiplexing) technology, helping send and receive data at a distance of up to 20km (12.4 miles) over only one fiber, which saves half of the cable deployment cost for customers.
TL-FC111A-20 transmits data at 1550nm wavelength and receives data at 1310nm wavelength on optical fiber.
The TL-FC111A-20 works in the other end as a pair by receiving data at wavelength 1550nm and sending data at wavelength 1310nm.
TP-LINK TPLINK TLSM5310T - Mini GBIC, 10GBaseT
66.79 EUR
10G BASE-T RJ45 SFP+ ModuleThe TL-SM5310-T provides superior 10G performance for easy and fast connection between your SFP+ interface and an RJ45 port.
With up to 30m range at 10Gbps over UTP cat.6a network cable (or higher) and plug and play design, this module allows you to easily deploy 10Gbps speeds without even needing a technician.
The high-quality metal housing ensures high robustness and reliability over a long period of time, ensuring a stable connection in a wide range of deployment scenarios.
- Supports 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T and 100BASE-TX
- Data transmission up to 30m* at 10Gbps (UTP Cat.6a or higher)
- Supports DDM (temperature and voltage)
- Hot-pluggable SFP+ footprint features
- Supports TX disable function
- Commercial product Operating temperature range: 0-70°C
- Fully metallic housing for low EMI
Package contents:
- 10G BASE-T RJ45 SFP+ Module TL-SM5310-T
- Installation guide
TL-SM5310-T is fully compatible with all current TP-Link switches that offer SFP+ ports , but with various fiber devices from other manufacturers.
TP-LINK TPLINK TLRT480T+ - Loadbalance Broadband Router, Lightning Protection
66.08 EUR
The TL-R480T+ is a product designed for small businesses. It has three interchangeable interfaces that can be set to either LAN or WAN, allowing the router to offer up to four WAN ports to meet different Internet access requirements using a single device. At the same time, network traffic is controlled to ensure that the data is correctly distributed to the ports. TP-LINK's TL-R480T+ will provide you with consistent network availability and reliable Ethernet connectivity.- 1 fixed 10Mbps WAN port, 1 fixed 10Mbps LAN port, and 3 freely configurable 10/100Mbps ports (version 4.0 only)
- The load balancing function automatically selects the best line depending on the amount of data
- Professional lightning protection keeps your investment as safe as possible
Online discovery and testing on the WAN interface
Online discovery and testing on the WAN interface is used to test the connectivity of the line through PING/tracert discovery or a DNS request and is a great help for administrators to check for and eliminate barriers and errors.
IP/MAC address binding effectively prevents network attacks
IP/MAC address binding ensures that only the computers that use both the correct IP and MAC addresses for authentication can access the network, limiting the possibility of malicious network attacks from outside.
Security-Focused Business Investments
The professional lightning protection is designed to prevent the penetration of overvoltages into the interior of the electrical equipment and to discharge them innocously into the earth. This router can block lightning strikes of up to 4kV under well-grounded conditions. This feature ensures that your investment in network infrastructure is spared as much as possible from the powers of Mother Nature.
Intelligent Load Balancing
The internal automatic line redirection strategy can distribute data streams according to the bandwidth proportion and utilization rate of the multi-line broadband. In addition, you can manually manage WAN bandwidth in the form of a percentage. This makes it very easy for you to set up load balancing rules.
IP- and port-based QoS
TP-LINK's TL-R480T+ supports IP and port-based QoS, enabling high-performance multimedia streaming, video conferencing, gaming, and more.
TP-LINK TPLINK TLRT470T+ - Load Balance Broadband Router
51.28 EUR
The TL-R470T+ load balance broadband router is a wise choice for small business. It brings you high return on investment with low overhead. Featuring three changeable WAN/LAN ports, TL-R470T+ supports up to 4 WAN ports, which can satisfy various Internet access requirements through one device. TL-R470T+ integrates multiple load balancing strategies, advanced QoS and strong firewall to provide you with consistent network uptime and reliable Ethernet connectivity. Moreover, it is easy to manage the TL-R470T+ via a web-based utility, which makes building and managing your network more convenient. - Up to 4 WAN ports equipped with advanced load balance to guarantee maximum bandwidth and backup capabilities
- Provides extensive client account and network management for administrators with supported PPPoE Server
- Marshals bandwidth resource to specific clients based on their unique application environments
- Smaller case for cost-effective solution in the small office or Internet cafes network
Three Changeable WAN/LAN Ports
The TL-R470T+ features three changeable ports that can be set to either LAN or WAN, allowing the router to support up to four WAN ports to satisfy various Internet access requirements through one device. The router also has an integrated smart load balancing function which automatically selects the most efficient line according to load and bandwidth requirements, providing users with consistent network uptime and reliable Ethernet connectivity.
Abundant Security Features
For defense against external threats, TL-R470T+ can automatically detect and block Denial of service (DoS) attacks such as TCP/UDP/ICMP Flooding, Ping of Death and other related threats. Moreover, this router provides IP/MAC/URL/WEB filtering functions, which forcefully prevent attacks from intruders and viruses. For applications such as FTP, H.323, SIP, IPsec and PPTP which are not well compatible with NAT, TL-R470T+ offers administrators one-click enable of ALG choices corresponding to the above five applications.
Efficient Access Management
By setting a PPPoE Server to allocate PPPoE accounts to private network users, the router only allows users with legal accounts that have passed authentication to access the Internet. Cooperating with IP-based Bandwidth Control, it is capable of confining bandwidth usage of certain PPPoE accounts. Moreover, the E-Bulletin function is able to release a bulletin in the form of webpage to certain user groups periodically, which notifies the users about the expiration date of the PPPoE account. With the above features, the router will prioritize different users in surfer jurisdictions for more efficient management.
Safety Minded Enterprise Investments
Professional lightning protection technology is designed to prevent electrical surges from penetrating the interior of the device...
TP-LINK TPLINK ARC T2E - WiFi Adapter, PCIe, 633 MBit/s
30.57 EUR
AC600 Wireless Dual Band PCI Express Adapter- 200 Mbps (IEEE 802.11b/g/n 2.4 GHz)
- 433 Mbps (IEEE 802.11a/n/ac 5 GHz)
- PCI Express
- 1x Detachable External Antenna
AC600 Dual Band WiFi
Make full use of your network with Wi-Fi speeds up to 600 Mbps (433 Mbps on the 5 GHz band and 200 Mbps on the 2.4 GHz band)
MU-MIMO Supported
Boost network throughput and efficiency when working with a compatible MU-MIMO router
Broad Wireless Range
Connect to your Wi-Fi in more parts of your home with a powerful signal-boosting high-gain antenna
WPA3 Supported
Improve cybersecurity with more secure and individualized protection
Low-Profile and Full-Height Brackets
Customized options give you the flexibility to find a bracket that perfectly fits your board design
Package Contents:
- AC600 Wireless Dual Band PCI Express Adapter
- Archer T2E
- Low-Profile Bracket
- Quick Installation Guide
- Resource CD
TP-LINK TPLINK TL-FC1420 - Media converter housing, 14 slots
240.65 EUR
14-slot rackmount enclosure- 14x slots for up to 14 media converters
- Standard 19''
- 2 U
- 2x fans
The TL-FC1420 14-slot rackmount chassis is specifically designed to hold 14 TP-Link media converters for centralized power supply, saving space and power cables.
Continuous operation is of great importance for fiber optic communications.
Therefore, the enclosure is optionally equipped with redundant power supply and hot-swapping function, which allows the converter to be installed / removed without powering off the enclosure.
To stabilize the performance and extend the lifetime, two fans are also installed internally.
Together with FC series Gigabit / Fast Ethernet media converters, TL-FC1420 is the ideal solution for your media conversion network.
* For TP-Link media converters, TL-FC1420 supports TL-FCXXX version 1.0 and above.
TP-LINK TPLINK MC100CM - 100Base TX > 100Base SC multimode converter
43.02 EUR
The MC100CM is a media converter designed for converting 100BASE-FX fibre media into 100Base-TX copper media and vice versa. The MC100CM was designed according to the IEEE802.3u 10/100Base-TX standard and the 100Base-FX standard and is intended for use with multimode fibre-optic cables and the SC plug. The MC100CM supports the long-wave (LX) laser specification for a transfer rate corresponding to the full bandwidth. It functions at 1310nm for both transmitting and receiving data.Other features of this module include: the option of using the device as a stand-alone device (no enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, auto-tuning in duplex mode at the transmission port and status LED on the front. The MC100CM transmits in fibre-optic long distance mode via the multimode fibre-optic cable up to a distance of 2 km.
• Auto-tuning from 10/100 MBit/s and auto MDI/MDI-X at the TX port.
• Offers the switch configuration for the half-duplex/full duplex transmission mode for the FX port.
• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.
• Fibre-optic transmission distance of up to 2 km.
• Easily visible LEDs display the status, allowing the network to be easily monitored.
• External power supply unit.
TP-LINK TPLINK MC112CS - 10/100BaseTX>100Base single mode FXConverter
35.78 EUR
WDM fast Ethernet media converterTP-LINK MC112CS - Fibre media converter - 10Base-T, 100Base-FX, 100Base-TX - RJ-45 / SC-single mode - up to 20 km - 1310 (TX) / 1550 (RX) nm
The MC112CS is a media converter designed for converting 100BASE-FX fibre media into 100Base-TX copper media and vice versa. The MC112CS uses WDM technology and requires only one fibre-optic cable for transmitting and receiving data, reducing your cable costs by half. The MC112CS was designed according to the IEEE802.3u 10/100Base-TX standard and the 100Base-FX standard and is intended for use with single mode fibre-optic cables and the SC plug. TheMC112CS supports the long-wave (LX) laser specification for a transfer rate corresponding to the full bandwidth. It functions at 1,310 nm for transmitting data and at 1,550 nm for receiving data. This means that the other end device, which is designed to work with the MC112CS, has to function at 1550nm for transmitting data and at 1310nm for receiving data. Other media converters from TP-LINK that could work with the MC112CS include the MC111CS.
Other features of this module include: the option of using the device as a stand-alone device (no additional enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, auto-tuning in duplex mode at the transmission port and status LED on the front. The MC112CS transmits in fibre-optic long distance mode via the single mode fibre-optic cable up to a distance of 20 km.
• Auto-tuning from 10/100 Mbps and auto MDI/MDI-X at the TX port.
• Offers the switch configuration for the half-duplex/full duplex transmission mode for the FX port.
• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.
• Uses WDM and transmits and receives via a single fibre.
• Fibre-optic transmission distance of up to 20 km.
• Easily visible LEDs display the status, allowing the network to be easily monitored.
• External power supply unit.
TP-LINK TPLINK MC111CS - 10/100BaseTX>100Base single mode FXConverter
48.66 EUR
WDM fast Ethernet media converter• Works according to standards 802.3u 10/100Base-TX, 100Base-FX.
• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.
• Uses WDM and transmits and receives data via a single fibre.
The MC111CS is a media converter designed for converting 100BASE-FX fibre media into 100Base-TX copper media and vice versa. The MC111CS uses WDM and requires only one fibre-optic cable for transmitting and receiving data, reducing your cable costs by half. The MC111CS was designed according to the IEEE802.3u 10/100Base-TX standard and the 100Base-FX standard and is intended for use with single mode fibre-optic cables and the SC plug. The MC111CS supports the long-wave (LX) laser specification for a transfer rate corresponding to the full bandwidth. It functions at 1550nm for transmitting data and at 1310nm for receiving data. This means that the other end device, which is designed to work with the MC111CS, has to function at 1310nm for transmitting data and at 1550nm for receiving data. Other media converters from TP-LINK that could work with the MC111CS include the MC112CS.
Other features of this module include: the option of using the device as a stand-alone device (no additional enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, auto-tuning in duplex mode at the transmission port and status LED on the front. The MC111CS transmits in fibre-optic long distance mode via the single mode fibre-optic cable up to a distance of 20 km.
• Auto-tuning from 10/100 Mbps and auto MDI/MDI-X at the TX port.
• Offers the switch configuration for the half-duplex/full duplex transmission mode for the FX port.
• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.
• Uses WDM and transmits and receives via a single fibre.
• Fibre-optic transmission distance of up to 20 km.
• Easily visible LEDs display the status, allowing the network to be easily monitored.
• External power supply unit.
TP-LINK TPLINK UH400 - USB 3.0 4-Port Portable Hub
25.4 EUR
USB 3.0 ports offer transfer speeds of up to 5Gbps, 10 times faster than standard USB 2.0The 4 data transfer ports mean you don't have to switch between devices
The UH400 supports all USB devices including USB drives, mice, printers or any other USB device you want to run simultaneously. USB 3.0 ports offer transfer speeds of up to 5Gbps, 10 times faster than the USB 2.0 standard.
High Speed Data Transfer
Equipped with USB 3.0 ports, UH400 provides a data transfer rate of up to 5Gbps, 10 times faster than USB 2.0.
Expand Your USB Ports
UH400 adds 4 additional USB ports to your PC, making it unnecessary to switch between devices.
Compact and Portable Design
Compact design with a retractable cable makes it an ideal USB HUB on the go.
Safe and Reliable
UH400’s multiple protections avoid any potential harm to your connected devices no matter you’re transferring data or charging devices.
TP-LINK TPLINK TAPO T100 - Smart motion sensor
30.52 EUR
Intelligent motion sensorLong-range detection
Detects movements at a distance of up to 7 m (23 ft.) and with a viewing angle of 120°.
Motion-controlled light
Control the intelligent light based on your movements and schedule.
Energy saving
Switch connected smart devices on automatically when you come and go.
Instant alarms and app notifications
Notifies you of anything you want to know in away mode.
Battery powered
The compact, battery-powered design allows for over a year of operation.
Easy to install
Attachment with 3M adhesive or supplied magnets
Scope of delivery:
- Tapo T100
- Quick start guide
- CR2450 battery
- Adhesive tape
Please note
A Tapo Hub is required. This is not included in the scope of delivery.
TP-LINK TPLINK TAPO T110 - WLAN Door & Window Sensor
35.33 EUR
Tapo Smart Motion Sensor- 868 MHz protocol
- CR2032 battery
Know the status
Stop wondering if you've closed all your windows when you leave the house.
Check your doors and windows at a glance with the Tapo app.
Automatically turn on lights
Set your Smart Contact sensor to turn on lights when you open your door.
More than just doors and windows
Place the Smart Contact Sensor elsewhere, such as in your cabinets and drawers, for more convenience.
Instant push notifications
Get instant alerts on your phone when a door or window opens unexpectedly.
The hub can sound a siren to warn of danger and deter intruders.
Long-lasting performance
A battery life of more than 1 year ensures long-lasting convenience.
You will be notified by the Tapo app when the batteries are low and need to be changed.
Easy installation
Mount it wherever you need it with our tool-free installation.
The distance between the sensor and the magnet (up to 15 mm) fits most doors, windows and other fixtures.
All in one app
Experience your next-generation smart home with the Tapo line - all in one app.
Create a safe, convenient and comfortable living space for you and your loved ones.
Package contents:
- Tapo T110
- Instruction manual
- Battery CR2032 x 1
- 3M adhesive
TP-LINK TPLINK TAPO T310 - Smart temperature/humidity sensor
29.49 EUR
Intelligent temperature and humidity sensorFast and accurate monitoring
Captures temperature and humidity with a high-precision, Swiss-made sensor. Data acquisition and update every 2 seconds. (Accuracy: ±0.3 °C, ±3% RH)
Home automation
Automatically turns home electronics on/off when settings are out of preset range.
Free data storage and visual graphics
Records temperature and humidity data and produces periodic data summaries.
App notifications
Receive instant alerts on your phone when values are outside preset ranges.
Flexible Installation
Hang it with a lanyard, attach it to a surface with an adhesive or magnet, or simply place it on a desk.
Hub required
Tapo Smart Hub (H100) is required.
Package contents:
- Tapo T310
- CR2450 battery
- Lanyard
- Quick start guide
- 3M adhesive
- Adhesive magnet
- Ejector pin
TP-LINK TPLINK ARC T4E - WLAN-Adapter, PCIex, 1200 Mbps
39.9 EUR
AC1200 Wireless Dual Band PCI Express Adapter Archer T4E- Easy Installation - Plug the adapter into an available PCI-E slot to upgrade your desktop
- High Speed Wi-Fi - Up to 1200 Mbps Wi-Fi speeds (867 Mbps on 5 GHz band and 300 Mpbs on 2.4 GHz band)
- 802.11ac Dual Band - 3 times faster than the 802.11n standard, perfect for high-intensity network usage
- Beamforming - Wi-Fi signals are strengthened towards certain direction where client exists
- Multiple-Size Brackets - Low profile and full heigh brackets are both provided, suitable for all PCs
- 2×2 MIMO - Users can easily access to high-speed wireless connection
- Broad Wireless Range - Two external antennas ensure greater Wi-Fi coverage and enhanced stability
802.11ac - Dual Band Wi-Fi for Faster Connections
TP-LINK's Archer T4E supports the advanced Wi-Fi standard of IEEE 802.11ac, offering 3 times transferring rates as IEEE 802.11n. You can send emails and browse the web with 2.4GHz network, while keeping the speedy 5GHz band free for gaming, HD streaming and other bandwidth intensive applications.
Greater Coverage with Beamforming
Beamforming technology smartly focuses Wi-Fi signals towards connected devices for stable connections and boosted range.
Heat Sink for Ultimate Stability
A heat sink helps to dissipate the thermal energy generated by the adapter, which in turn improves stability. Additionally, lower temperatures help to extend the product lifespan.
TP-LINK TPLINK TAPO T315 - Smart temperature/humidity monitor
40.91 EUR
Intelligent temperature and humidity monitorReal-time and precision monitoring
Detects temperature and humidity in real time with high accuracy. (Measurement accuracy: ±0.54 ºF, ±3% RH).
2.7'' E-Ink Display
Displays temperature and humidity, comfort level with facial expression, battery status and signal.
Home automation
Automatically turn on and off home electronics (e.g. heater, fan, humidifier, etc.) to optimize compliance and save energy
Free data storage and visual graphs
Record temperature and humidity data and create regular data summaries.
Flexible installation
Simply place it on your desk or mount it on the wall.
Instant app notification
Get an app notification when conditions are out of the preset range.
Hub required
Tapo Hub is required to support smart features like remote monitoring, home automation, data export and more.
Package contents:
- Tapo T315
- AAA/LR03 battery
- 3M adhesive
- Quick start guide
STARTECH.COM ST MCMGBSCMM055 - Media Converter - Fiber, 1000Base-SX, MM
139.88 EUR
Convert and extend a Gigabit Ethernet connection up to 550 m over multimode SC fiber- Converts and extends a Gigabit Ethernet fiber (1000MBit/s) network over multimode fiber on 1000BASE-SX networks
- Provides a cost-effective Ethernet to fiber/copper to fiber link
- Supports a maximum distance of 550 m over multimode fiber-optic cable (SC connection)
- Compact design and wall mountable
- Non-blocking full wire-speed forwarding rate
This fiber media converter extends a Gigabit Ethernet (1000MBit/s) network up to 550 m over multimode fiber, on 1000BASE-SX networks.
Extend your GbE network cost-effectively
The fiber media converter offers a cost-effective way to transparently convert copper to fiber, or fiber to copper, for connecting remote sub-networks to larger fiber-optic networks. Providing both SC fiber and RJ45 Ethernet ports, it integrates easily into a wide range of Gigabit Ethernet network infrastructures. The RJ45 port supports triple-speed (10/100/1000 BASE-T) auto-negotiation.
Reliable and scalable network connectivity
Supporting a maximum multimode fiber-optic cable distance of 550 meters (0.34 miles), the media converter delivers a simple and reliable solution for connecting Gigabit Ethernet networks to remote locations over multimode fiber, while ensuring solid network performance. It provides optimum network scalability for connecting two or more Ethernet network nodes, for instance, connecting two buildings on the same campus or facility. The media converter also offers high-speed bandwidth to meet the increasing demands of large-scale workgroups that require expansion of a Gigabit Ethernet network.
TP-LINK TPLINK ARCHERT2N - WLAN adapter, USB, 600 MBit/s
25.44 EUR
High-speed dual-band WLAN adapter for faster connectionThe Archer T2U Nano receives WLAN signals on two separate bands. Thanks to 256QAM technology, the data rate is increased to 2.4 GHz from 150 MBit / s to 200 MBit / s, increasing performance by 33%. With 433 Mbps at 5 GHz, the Archer T2U Nano is ideal for bandwidth-intensive applications such as HD video streaming or online gaming, while the WLAN speed of 200 Mbps at 2.4 GHz covers normal use.
- Fast WLAN Speed - Up to 200MBit/s at 2.4Ghz and 433MBit/s at 5GHz
- Dual-band WLAN - 2.4GHz and 5GHz band for flexible connectivity, improved collaboration with dual-band WLAN router for faster speed and greater range
- Nano-Design - Mini format, ideal for use on the go
- Operating system - Supports Windows 10/8.1/8/7/XP, Mac OS X
- Advanced Security - Supports 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryption standards
Miniature design in nano format
The Archer T2U Nano USB adapter fits into any USB port and is therefore ideal for travelers, students and adventurers, so easy for anyone on the move.
Compact design and WLAN roaming - Best choice for mobile surfing
The public WLAN makes it difficult for you to find a stable network that shows different reception strengths when moving.
Thanks to WLAN roaming, the Archer T2U is able to automatically find the most suitable uninterruptible network. With its compact design, the Archer T2U is undoubtedly the best choice for mobile surfing.
INTELLINET INT 508544 - Media converter, 1000Base-SX SC
113.26 EUR
Gigabit Ethernet Media Converter10/100/1000Base-T to 1000Base-SX (SC) multimode, 550 m, autonegotiation
The Intellinet Gigabit media converter enables the integration of copper cable connections into a fiber optic network.
Herewith the integration or extension of the existing network can be done with low cost and effort.
Since the converter is fully network transparent, the network continues to operate in the same manner - now supporting both copper and fiber media.
Extends an existing network
With fiber connectivity, remote workgroups can now be integrated into the network.
Building-to-building connections can thus be set up without additional routers, saving effort and costs.
Increases the range between network devices
Connecting to a fiber optic segment can increase the distance between remote network nodes.
This can be achieved by connecting the converter directly to a fiber link node or network device.
Flexibility in cabling
Network administrators can install fiber optic cables anywhere within a network without having to change the copper cable network design.
The converter's compact design allows it to be installed in locations with limited space, as well as on a wall mount.
Likewise, multiple converters can be installed simultaneously in a 19'' rackmount enclosure.
- One 10/100/1000 RJ45 port supports a maximum range of 100m
- One 1000Base-SX multimode fiber SC port supports a maximum range of 550 m
- Supports operation in full duplex mode or half duplex mode with autonegotiation
- Link Fault Passthrough (LFP) for easier network maintenance
- Supports QoS bandwidth management
- Supports IEEE 802.1Q VLAN tagging
- Cut-through and store-and-forward architecture
- Wavelength: 850 nm
- Supports jumbo frames up to 9.2 KB
- Status LEDs for power and Link/TX on both ports
- External 5 V power supply
- Can be used as a stand-alone converter or with the 14-slot media converter chassis, model 507356
- Fully NDAA compliant
Scope of delivery:
- Gigabit Ethernet media converter
- External power supply
- Quick start guide
LIGHTWIN LWC GE SM20 SC - Media converter 1000Base-SX singlemode, SC, 20 km
123.6 EUR
Gigabit Mediaconverter 1000Base-LX Singlemode, SC, 20KM- Modus: Dual Fiber, Multimode, Gigabit Ethernet (RJ45 10/100/1000, SC=1000MBit)
- Wavelength: 1310nm
- Distance: 20km
Connectors:
- 1x optical SC
- 1x RJ45
Lightwin High Quality Singlemode media converter with important advantages compared to alternative no name converters.
All Lightwin converters support 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X.
Lightwin converters convince with the specially selected laser through a significantly longer service life.
All Lightwin converters come with an external power supply and can be used with the optional Lightwin chassis.
TP-LINK TPLINK ARCHT2UPL - WLAN-Adapter, USB, 633 MBit/s
29.33 EUR
AC600 high-gain dual-band USB WLAN adapterDualband USB adapter for better WLAN connection
The Archer T2U Plus receives the WLAN signal from two separate bands. With support for 256QAM, the WLAN speed increases to 2.4GHz from 150Mbps to 200Mbps.
It is ideal for home networking. With 433Mbps at 5GHz, the Archer T2U Plus is also an excellent choice for seamless HD streaming, online gaming and other bandwidth-intensive tasks.
- Fast WLAN speed:
Up to 600 Mbps (433 Mbps on 5GHz and 200 Mbps on 2.4GHz) with the 802.11ac standard - Dual-band WLAN frequency:
2.4 GHz and 5 GHz band for flexible connectivity, faster speed and greater coverage - high-gain antenna:
The 5dBi high-gain antenna for better WLAN reception and stronger transfer signal - Supported operating systems:
Compatible with Windows 10/8.1/8/7/XP and Mac OS X10.9~10.14
Greater WLAN coverage
Thanks to its external 5dBi high-gain antenna, the Archer T2U Plus has better WLAN reception and a stronger transfer signal.
Multidirectional, high performance antenna for maximum range
The Archer T2U Plus features a high performance multidirectional, directional antenna for stronger signal transmission and reception.
Easy installation
User-friendly interface for easy installation.
Advanced security
WPA / WPA2 encryption standard guarantees the security of the WLAN connection.
system requirements
Supports Windows 10/8.1/8/7/XP, Mac OS
TP-LINK TPLINK MC110CS - 10/100BaseTX>100Base single mode FXConverter
46.02 EUR
Fast Ethernet single mode media converter• Works according to standards IEEE802.3u (10/100Base-TX, 100Base-FX)
• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.
• Offers the switch configuration for the half-duplex/full duplex transmission mode for the FX port.
• Fibre-optic transmission distance of up to 20 km.
The MC110CS is a media converter designed for converting 100BASE-FX fibre media into 100Base-TX copper media and vice versa. The MC110CS was designed according to the IEEE802.3u 10/100Base-TX standard and the 100Base-FX standard and is intended for use with multimode/single mode fibre-optic cables with SC plug. The MC110CS supports the long-wave (LX) laser specification for a transfer rate corresponding to the full bandwidth. It transmits and receives at a wavelength of 1310nm.
Other features of this module include: the option of using the device as a stand-alone device (no additional enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, auto-tuning in duplex mode at the transmission port and status LED on the front. The MC110CS transmits in fibre-optic long distance mode via the multimode fibre-optic cable up to a distance of 20 km.
• Auto-tuning from 10/100 Mbps and auto MDI/MDI-X at the TX port.
• Offers the switch configuration for the half-duplex/full duplex transmission mode for the FX port.
• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.
• Fibre-optic transmission distance of up to 20 km.
• Easily visible LEDs display the status, allowing the network to be easily monitored.
• External power supply unit
D-LINK DMC-G01LC - Media converter, Gigabit Ethernet, SFP
55.43 EUR
1000BaseT to SFP Standalone Media ConverterD-Link's 10/100/1000Base-T to SFP Standalone Media Converter turns an Ethernet connection into a fiber-optic connection, allowing long distances to be bridged.
The standalone DMC-G01LC eliminates the need to invest in a complete chassis, while still delivering full conversion quality.
This stand-alone design saves you space and cost while extending your network over longer distances depending on the SFP transceiver installed.
The DMC-G01LC enables full-duplex connections at 1000 Mbps and fully exploits the potential of your network.
Optimal space utilization
Thanks to its compact size, the converter fits anywhere and does not require an additional chassis.
With dimensions of only 70 x 95 x 25 mm, it can be conveniently installed wherever it is needed, especially where space is limited, such as in network cabinets and distribution boxes.
LAN
- 1 x 10/100/1000 Mbps Port
- IEEE 802.3u/x/3ab
- Auto-negotiation for each port
- Full duplex at 1000 Mbps / Half/Full duplex at 10/100 Mbps
- Car MDI/MDIX
- Jumbo frames up to 9216 bytes at 1000 Mbps
Switching capacity
- 2Gbps
TRENDNET TRN TFC-1000S20 - Media converter, Gigabit Ethernet, SC, Singlemode
125.66 EUR
Intelligent 1000Base-T to 1000Base-LX Single-Mode SC Fiber Converter (20km/12.4miles)- SC-type single-mode fiber port connects over distances of up to 20km (12.4 miles)
- 1000Base-T Gigabit copper port supports Full-Duplex mode
- Supports port level SNMP management
- Functions as a stand alone converter or with the TFC-1600 fiber chassis
The TFC-1000S20 Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit.
This converter is a Single Mode SC-Type fiber converter that supports SNMP and spans distances up to 20km (12.4miles).
Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC-Type) port.
- Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards
- 1 x 1000Base-T RJ-45 port
- 1 x 1000Base-LX single-mode SC type fiber port
- Provides Dip switch to set: Fiber (Forced/Auto-Negotiation), LLR (Enable/Disable)
- Support LLCF (Link Loss Carry Forward, Link Pass Through)
- Support LLR (link Loss Return) for Fiber port
- Monitor and configure Ethernet or Fiber's duplex mode, LLR, port on/off and receive link down information via management module TFC-1600MM and chassis TFC-1600
- Status LED indicators for Power and Link/Activity
- Wall mountable
TRENDNET TRN TFC-PGSFP - Media converter, Gigabit Ethernet, SFP
70.88 EUR
Gigabit PoE PD SFP fiber optic media converter- 1 x 100/1000BASE-T PoE input
- 1 x 100/1000BASE-SX/LX SFP slot
- Power supply via PoE - no power supply unit required
- SFP slot supports multi-mode or single-mode modules
- Supports Link Fault Pass-Through (LFPT)
- Supports Jumbo Frame (9 KB)
TRENDnet's Gigabit PoE PD SFP fiber optic media converter, model TFC-PGSFP, converts 100/1000BASE-T copper Ethernet to 1000BASE-SX/LX fiber SFP media and vice versa.
The TFC-PGSFP is conveniently powered via PoE switch or injector, no power supply is required.
The converter has a Gigabit PoE input for power and data and an SFP slot that supports both multimode (SX) and single mode (LX) SFP modules.
The SFP slot offers both Fast Ethernet and Gigabit SFP modules for further installation flexibility.
INTELLINET INT 508209 - Gigabit PoE+ Media Converter
77.12 EUR
Gigabit PoE+ Media Converter1000Base-T RJ45 Port to 1000Base-LX (SC) Single-Mode, 20 km (12.4 mi.), PoE+ Injector
The Intellinet Network Solutions Gigabit PoE+ Media Converter offers simplified migration from copper-based Ethernet to Fiber Ethernet while providing power to a compatible device at up to 30 watts. The device creates the easy expansion of existing networks with minimum cost and complexity. The converter is completely transparent to the network so the network performs exactly the way it did before - only now it can support both copper and fiber mediums.
Expand the Size of an Existing Network.
The converter provides fiber connectivity to Ethernet segments, allowing for even further networking expansion between extended workgroups. Since it offers building-to-building connectivity without the cost and disruption associated with the installation of additional routers, network admins can quickly incorporate this converter into their current setup and keep the network running like it should.
Power-over-Ethernet-Plus Capable
The Intellinet Gigabit PoE+ Media Converter brings power to where there is none, obviating the need to hire an electrician and run electrical lines. And because the converter supports the IEEE 802.3at / 802.3af standard, up to 30 watts is available for any compatible device.
Cabling Flexibility
Network managers can install fiber cabling anywhere within a network without changing the arrangement of copper-based Ethernet. The compact size of the converter allows it to be easily deployed in any narrow desktop location or to be used in a wall-mount installation. Several converters can be simultaneously installed into a 19'' rack-mountable chassis.
- One 10/100/1000 RJ45 port supporting a maximum distance of 100 m (300 ft.)
- Fiber SC single-mode port connects distances up to 20 km (12.4 miles)
- Link Fault Passthrough (LFP) function for easier network maintenance
- Supports an IEEE 802.3at and IEEE 802.3af-compliant PoE device (e.g., wireless access point, VoIP phone, IP camera, etc.)
- Provides power output up to 30 watts for one PoE-compliant device
- Supports full-duplex and half-duplex modes with autonegotiation
- Status LEDs for power and Link/TX for both ports
- IP30 slim-type metal case
D-LINK DMC-G02SC - Medienkonverter, Gigabit Ethernet, SC Duplex
71.92 EUR
Gigabit Ethernet Converter - 1000Mbit/s TP (RJ-45) to 1000Mbit/s SX (SC-Duplex) (550 m)- Converts from 1000 Mbps (RJ-45) to 1000 Mbps SX multimode (SC duplex)
- FDX
- Distance up to 550m
- Converts gigabit copper to fiber optic SX
- Cost-effective adaptation of network cabling
- Avoids expensive new investments
- Different cable lengths possible
- AC adapter included
With growing networks and increasing data volumes, fiber optic cabling and fiber optic devices are becoming increasingly important.
Fiber optic lines are highly suitable for such internal LAN connections as they combine interference-free transport with a high level of security against interception.
This process is usually gradual, so that many companies have both gigabit copper lines and fiber optic lines.
However, these converters are also suitable for companies that want to connect different gigabit cabling systems as part of an office expansion.
In this way, different topologies in the gigabit range can be harmonized in a simple and cost-effective way.
Depending on the lengths to be bridged, you can choose between the DMC-G02SC and the DMC-G10SC.
Each converter easily combines Gigabit Ethernet twisted pair cabling with fiber optics.
The DMC-G02SC is designed for SX fiber optic cabling with a maximum length of 550 m and the DMC-G10SC for LX fiber optic cabling with a maximum length of 10 km.