REICHELT IE: Hifi audio accessories
The Best
Typical applications
Narrow network column speakers
Control speaker for electronic devices
Ceiling-mounted speakers in railway carriages and busses
Electronic musical instruments"
Top Pick
Applications
• Narrow ELA lines
• Control speaker for electronic devices
• Modelling
• Electronic musical instruments
Features
• Waterproof membrane
• Metal version
• Temperature resistant to 100°C"
Excellent
Applications
• Multimedia speakers
• Video monitors
• TV devices
• Computer terminals
Features
• Moisture-repellent membrane
• Metal version
• Magnetic shielding
• Rated power: 20 W
• Music power 30 W
• Nominal impedance Z 8 ohm
• Frequency range (-10 dB) 80 - 15000 Hz
• Mean sound pressure level 82 dB (1 W/1 m)
• Beam angle (-6 dB) 180°/4000 Hz
• Resonant frequency fs 125 Hz
• Magnetic induction 0.8 T
• Magnetic flux 150 µWb
• Upper pole plate height 3 mm
• Voice coil diameter 20 mm
• Winding height 4.5 mm
• Baffle opening 76 mm
• Net weight 0.25 kg
• DC resistance Rdc 7.9 ohm
• Mechanical Q factor Qms 2.94
• Electrical Q factor Qes 1.29
• Total Q factor Qts 0.9
• Equivalent volume of compliance Vas 1.0 l
• Effective diaphragm area Sd 30 cm²
• Dynamic moving mass Mms 2 g
• Drive factor Bxl 2.2 Tm
• Voice coil inductivity L 0.3 mH
• Temperature range -25 - 70°C"
Recommended
- Moisturised cone
- Metal version
- IP protection class IP X4 *)
3 x 7 cm (1.2"" x 2.8"") full-range loudspeaker with balanced frequency response and clear high-frequency reproduction. Minimal installation dimensions due to use of neodymium magnet system. Applications include compact built-in solutions in TVs as well as in PCs.
*) IP protection class for the front panel when installed in a sealed housing (bonding of the loudspeaker may be necessary)
Applications
- Video monitors
- TV devices
- Control speaker for electronic devices
- ATMs
- Rated power: 3 W
- Nominal impedance Z: 8 ohm
- Transmission range (-10 dB): 160 - 12,000 Hz
- Mean sound pressure level: 78 dB (1 W/1 m)
- Excursion limit: +/-2.4 mm
- Resonant frequency fs: 300 Hz
- Upper pole plate height: 2 mm
- Voice coil diameter: 13.5 mm
- Winding height: 3.6 mm
- Net weight: 24.5 g
- Connections: soldering tags (2.4 x 0.3 mm)
- IP protection class: IP X4 *)
- Temperature range: -20 to 70°C
Featured
With coated paper membrane, strong drive and deep-drawn pole plate. Special voice coils and elastic rubber surround for large strokes.
- Music power: 80 W
- Rated power: 50 W
- Impedance: 8 Ohm
- Transmission range: fu - 8,000 Hz
- Mean sound pressure level: 86 dB
- Resonance frequency: 36 Hz
- Installation diameter: 148 mm
- Basket diameter: 187 mm"
Alternative
From the contents:
• Physical principles
• Speaker drive principles
• Technical data and measuring methods
• Sound distortion
• Speaker combinations
• Sound transmission types (enclosed bass reflex, band-pass, TL, horn)
• Crossovers
• Speaker construction
Applications:
• ELA lines
• Ceiling-mounted speaker in rail vehicles and buses
• Car HiFi built-in speaker
• Electronic musical instruments
• Rated power: 30 W
• Music power 50 W
• Nominal impedance Z 8 ohm
• Frequency range (-10 dB) 80 - 20000 Hz"
Technical data
- Nominal impedance Z: 8 ohm
- Transmission range (-10 dB): 150 - 22000 Hz
- Average sound pressure level: 82 dB (2.83 V/1 m)
- Crossover frequency: 4000 Hz
- Cabinet principle: bass reflex
- Music power with high-pass filter: 90 W
- Rated power with high-pass filter: 60 W
- Net volume: 0.8 l
- External height: 180 mm
- External width: 86 mm
- External depth: 105 mm
Assembly list for 1 loudspeaker
The kit includes all components listed in this equipment list, but not the cabinet or aluminium pipe.
- Tweeter: SC 5 - 8 ohm
- Woofer: F 8 SC - 8 ohm
- Crossover: crossover NANO SAT MK II
- Terminal: PT 57 NG
- Wood screws: 3.5 x 19 mm
- Countersunk screws: 3.5 x 25 mm
- Protective grille: Effekt 80
- Cable: 2 x 1.5 mm²
With high-range cone and Euro standard basket. Simple to install in vehicles with cut-outs for 10-cm speakers.
- Music power: 30 W
- Rated power: 20 W
- Impedance: 4 Ohm
- Transmission range: 95 - 22,000 Hz
- Mean sound pressure level: 86 dB
- Resonance frequency: 120 Hz
- Installation diameter: 94 mm
- Installation depth: 46 mm
- Basket diameter: 100 mm"
Accessories from:
- FR 10 - 4 Ohm
- FR 10 - 8 Ohm
- R 10 S - 4 Ohm
- R 10 S - 8 Ohm
- R 10 SC - 4 Ohm
- R 10 SC - 8 Ohm
- FX 10 - 4 Ohm
- PX 10 - 4 Ohm
- R 10 S TE - 8 Ohm
- R 10 SC Special - 8 Ohm
- R 10 S TE - 4 Ohm
Can be supplied painted in other colours on request.
- Suitable for:
FR 10 4 OHM
FR 10 8 OHM
FR 10 F 4 OHM
FR 10 HM 4 OHM
FR 10 HM 8 OHM
FX 10 4 OHM
R 10 S 4 OHM
R 10 S 8 OHM
R 10 SC 4 OHM
R 10 SC 8 OHM
- Plastic: ABS
- Net weight: 10 g
Accessories from:
- FR 58 - 8 Ohm
- FR 58 - 4 Ohm
- Salt-water-resistant
- IP protection class: IP 65 *)
- Functional at low temperatures in accordance with EN 60068-2-1 (-40°C, 96 h)
- Meets the requirements of Germanischer Lloyd (requirements for electrical equipment/cold)
- Plastic: ASA (UL 94:HB, UV/weather resistant)
- Impact-resistant
Sea water resistant 8 cm (3.3"") full range speaker with injected plastic membrane and plastic basket and grille. Fully corrosion-proof and water resistant due to magnetic housing and silicone sheathing on supply line. Clear high-frequency reproduction.
*) IP protection class for the front when installed in a sealed housing
Applications
- Outdoor sound systems
- Loudspeaker for solariums and damp rooms
- Boats, ships and open vehicles
- Rated power: 15 W
- Music power: 25 W
- Nominal impedance Z: 8 ohm
- Transmission range (-10 dB): 100 - 20,000 Hz
- Mean sound pressure level: 84 dB (1 W/1 m)
- Beam angle (-6 dB): 114°/4000 Hz
- Excursion limit: +/-3 mm
- Resonant frequency fs: 158 Hz
- Magnetic induction: 1 T
- Magnetic flux: 190 µWb
- Upper pole plate height: 3 mm
- Voice coil diameter: 20 mm
- Winding height: 4 mm
- Baffle opening: 74 mm
- Net weight: 0.23 kg
- Colour: black
- Connections: 5.2 x 0.5 mm (+)/2.8 x 0.5 mm (-)
- IP protection class: IP 65 *)
- Temperature range: -40 - 80°C
Technical data:
Net weight: 0.282 kg
Installation depth: 90 mm
- Type: 3M VHB 4919F
Adhesive pad for mounting the EX 60 R - 8 Ohm exciter on smooth surfaces.
Accessories from:
- EX 60 R - 8 Ohm
- IP protection class IP X4 *)
3.7-cm (1.5"") full-range loudspeaker with a wide, balanced frequency response and excellent bass reproduction. With powerful neodymium drive and large excursion, optimised for small bass reflex enclosure/enclosure with passive membranes. Well suited to applications that require both a small size and good music and speech playback.
*) IP protection class for the front panel when installed in a sealed housing (bonding of the loudspeaker may be necessary)
Applications
- Flat screens (TV and PC)
- Information terminals
- Other compact devices and machines for speech and music playback
- Rated power: 5 W
- Music power: 8 W
- Nominal impedance Z: 8 Ohm
- Transmission range (-10 dB): 100 - 20,000 Hz
- Mean sound pressure level: 74 dB (1 W/1 m)
- Excursion limit: +/-3.4 mm
- Resonant frequency fs: 155 Hz
- Net weight: 33.1 g
- DC resistance Rdc: 7.0 ohm
- Mechanical Q factor Qms: 4.0
- Electrical Q factor Qes: 1.1
- Total Q factor Qts: 0.86
- Compliance equivalent volume Vas: 0.05 l
- Effective diaphragm area Sd: 6.2 cm²
- Dynamic moving mass Mms: 1.0 g
- Drive factor Bxl: 2.56 Tm
- Voice coil inductivity L: 0.085 mH
- Connections: soldering tags
- IP protection class: IP X4 *)
Applications
• Control speaker for electronic devices
• Ceiling-mounted speaker in rail vehicles and buses
• Mini HiFi speakers
• Modelling
Features
• Moisturised cone
• Metal version"
Applications:
• Built-in speaker in vehicles, buses or rail vehicles
• Electronic musical instruments
• Control speaker in electronic equipment
- Music power: 40 W
- Rated power: 15 W
- Impedance: 8 Ohm
- Transmission range: 70 - 18,000 Hz
- Mean sound pressure level: 85 dB
- Resonance frequency: 110 Hz
- Installation diameter: 114 mm
- Basket diameter: 130 mm
- Installation depth: 28 mm"
Hifi audio accessories REICHELT IE Best Products
Thanks to a perfect selection of materials and adhesives, the speaker can also be used under extreme environmental conditions, such as in high heat or cold, to provide the necessary bass foundation.
The computer-optimised suspension geometry, striving for the largest possible stroke and small size, allows for enormous sound pressure levels without fear of a sudden limitation.
This makes the W 165 A the perfect match, especially when it comes to high robustness.
Applications:
- Outdoor sound systems
- Speakers for saunas
- Boats, ships and open vehicles
- Sound modules in the automotive area for noise simulation
- Exhaust systems
- ANC systems for noise reduction
Features:
- Temperature resistance up to 150°C.
- Weatherproof
- IP 64
The conductor cross-section of 2x 0.14 mm² and shielding consisting of twisted copper strands (spiral shielding, 95% cover) protect against external disturbances. The single-strand design (18 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the stereo extension cable is extremely flexible and easy to wind.
The conductor cross-section of 0.14 mm² and spiral sheathing protect your signals against disturbance from external influences. Thanks to the single-strand design (18 x 0.10 mm) and the robust yet flexible PVC-blend sheathing, it is particularly flexible.
B1
With Neutrik metal plug connectors.
3.5-mm stereo jack plug
to 2 x RCA plugs
Length: 1.5 m
Colour: black
Ideal for patching devices in 19"" racks
and for floor-effect devices at live shows."
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (spiral shield, 95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
Mono jack to mono jack
Length: 1.5 m
Colour: black
Used in conjunction with NEUTRIK/REAN jack connections, this cable provides extremely high quality at an affordable price.
Gold-plated contacts, screw-on connector collar, metal.
Equipped with NEUTRIK® mono jack plugs, it is designed to connect passive speakers (for example, from the top to the speaker - max. 48 volts!). These affordable yet high-quality speaker cables are a must-have for any live sound or studio setup.
Angled plug on one side.
Asymmetrical, very flexible CIK122 Fairline connecting cable with fine spiral shield. Reliable for harsh use on stage, this cable has high mechanical strain and provides good electrical values.
Length: 9,0 m
Colour: black
The very flexible cable guarantees the highest functionality and quality in continuous operation for stage and studio.
In conjunction with Neutrix XLR connectors, you can achieve high quality at a reasonable price.
All XLR connectors have a ring with a label field. Incl. Velcro® strap.
XLR plug/XLR coupling
Length: 7,5 m
Colour: black
The conductor cross-section of 2x 0.22 mm² and shielding consisting of twisted copper strands (95% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (28 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the XLR cable is extremely flexible and easy to wind.
With the CFCA S-TRUE 1, we offer a high-quality device connection cable to IEC EN 60799:2021, which is ideal for the power supply of active loudspeakers, moving heads and other hardware. In professional stage applications, the CFCA S-TRUE 1 delivers on every front.
With a conductor cross-section of 3x 1.50 mm², the robust, 3-pin plug from the NEUTRIK® powerCON® TRUE1® series and a protective contact plug (CEE 7/7), a current carrying capacity of up to 16 A is guaranteed.
The H07RN-F rubber cable used is the best choice for outdoor events. This robust cable, also known as ""heavy rubber cable"", meets the highest demands in terms of flexibility (both in terms of material quality and in terms of its application possibilities) and reliability.
In addition, transparent shrink tubing at both ends enables individual labelling."
The conductor cross-section of 2x 0.14 mm² and shielding consisting of twisted copper strands (95% cover) ensure unadulterated signal transmission. The single-strand design (18 x 0.10 mm) and the robust yet flexible PVC-blend sheathing ensure durability and make the cable easy to wind. The two 3.5-mm stereo jacks (mini-jack) feature sprayed-on anti-kink sleeves at their solder joints, thus allowing high mating cycles.
The conductor cross-section of 0.14 mm² and shielding consisting of twisted copper strands (90% cover) ensure crystal-clear and unadulterated signal transmission. The single-strand design (18 x 0.10 mm) and the robust but flexible PVC-blend sheathing ensure that the twin cable is easy to wind.
Die verwendete Meterware CME 220 sorgt mit einem Leiterquerschnitt von 0.22 mm² bestehend aus 28 x 0.10 mm Litzen aus hochreinem Kupfer für unverfälschte Signalübertragung. Eine Wendelschirmung schützt vor störenden Außeneinflüssen und verhindert Störgeräusche beispielsweise durch Netzteile oder Stromleitungen.
The conductor cross-section of 0.22 mm² and double spiral shielding with conductive plastic transport even the most elegant music unadulterated to its destination. Thanks to the single-strand design (28 x 0.10 mm), the durable but flexible PVC blend and the exquisite braided textile sheathing, it is particularly flexible and can be wound easily.
XLR connector to XLR coupling
Length: 5.0 m
Colour: black
Used in conjunction with NEUTRIK/REAN XLR and jack connections, this cable provides extremely high quality at an affordable price.
Screw-on connector collar.
The CPD FM digital cable has been designed for an optimal stage structure, both in terms of the solid and flexible nature of the material by the metre as well as the installed original NEUTRIK® connectors (in black).
Control processes with signal transmission in the DMX data format are an integral part of event technology. Similar to MIDI transmission, manufacturers have agreed on a technical standard for the intended connector (XLR) and the required impedance of the cable material used. This is 110 ohms.
A transparent shrink tube is used for individual labelling and at the same time prevents harsh kinking in the vicinity of the connector.
