VISATON VIS 4557 - Accessories, adhesive pad for EX60 R
13.87 EUR
Detailed sheet with complete information, compare prices and find the features for PRODUCTNAME, at the price of PRICE CURRENCY; classified in the category CATEGORY NAME; this product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
"
Adhesive pad for mounting the EX 60 R - 8 Ohm exciter on smooth surfaces.
Accessories from:
EAN: 4007540045573
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
"
- Type: 3M VHB 4919F
Adhesive pad for mounting the EX 60 R - 8 Ohm exciter on smooth surfaces.
Accessories from:
- EX 60 R - 8 Ohm
EAN: 4007540045573
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
Applications:
- Video monitors
- Control speaker for electronic equipment
- Ceiling-mounted speaker in rail vehicles and buses
Characteristics:
- Functions in cold conditions in accordance with EN 60068-2-1/EN 50155
- Can be stored at temperatures down to -40°C in accordance with EN 60068-2-1/EN 50155
- Functions in humid conditions (cyclical) in accordance with EN 60068-2-3/EN 50155
- Functions in dry heat in accordance with EN 60068-2-2/EN 50155"
- Moisture-repellent membrane
- Metal version
5-cm (2"") full-range speaker with round basket, soft surround and light special membrane. Balanced frequency response above 250 Hz and crisp high range playback with good omnidirectional response. Suitable as a mid-range driver in speaker lines for HiFi and public address systems as well as for ELA systems in the 100-V technology. Owing to the small size, the speaker is also very suited to modelling and for use as a control speaker in electronic equipment.
Applications
- Very narrow ELA lines
- Control speaker for electronic devices
- Modelling
- Rated power: 4 W
- Music power: 10 W
- Nominal impedance Z: 8 ohm
- Transmission range (-10 dB): 150 - 20,000 Hz
- Mean sound pressure level: 84 dB (1 W/1 m)
- Beam angle (-6 dB): 180°/4000 Hz
- Excursion limit: +/-2 mm
- Resonant frequency fs: 250 Hz
- Magnetic induction: 0.75 T
- Magnetic flux: 65 µWb
- Upper pole plate height: 2 mm
- Voice coil diameter: 14 mm
- Winding height: 2.7 mm
- Baffle opening: 45 mm
- Net weight: 0.098 kg
- DC resistance Rdc: 6.8 Ohm
- Mechanical Q factor Qms: 3.31
- Electrical Q factor Qes: 3.22
- Total Q factor Qts: 1.63
- Compliance equivalent volume Vas: 0.1 l
- Effective diaphragm area Sd: 12 cm²
- Dynamic moving mass Mms: 0.5 g
- Drive factor Bxl: 1.4 Tm
- Voice coil inductivity L: 0.1 mH
- Connections: soldering tags
- Temperature range: -25 - 70°C
Applications:
- Video monitors
- Control speaker for electronic equipment
- Ceiling-mounted speaker in rail vehicles and buses
Characteristics:
- Functions in cold conditions in accordance with EN 60068-2-1/EN 50155
- Can be stored at temperatures down to -40°C in accordance with EN 60068-2-1/EN 50155
- Functions in humid conditions (cyclical) in accordance with EN 60068-2-3/EN 50155
- Functions in dry heat in accordance with EN 60068-2-2/EN 50155"
The cleverly designed interplay of membrane shape, surround shape and surround material, as well as the adhesive used, have been successful in preventing membrane resonance or moving into the high-frequency range. The shape of the basket with large aperture and rear-ventilated spider and the open voice coil with its phase plug produce minimum mechanical losses and thus a high mechanical quality. As a result of the construction using double magnets, the TI 100 is also magnetically shielded.
The result can be seen: The acoustic values are excellent and in the VOX 200, for instance, the TI 100 8 Ohm demonstrates its transparent, analytical sound, but never becomes too much.
The TI 100 is ideal as a low mid-range driver in small, high-end shelf-mounted speakers or as a mid-range speaker in high-end multi-way speakers."
Equivalent to model R 10 SC - 8 Ohm, but with connectors 6.3 x 0.8 mm (+) and 4.8 x 0.8 mm (-) and with impregnated paper gasket.
Typical applications
Video monitoring screens
Control speakers for electronic devices
Ceiling-mounted speakers in railway carriages and busses
Technical Data
Rated power 20 W
Maximum power 30 W
Nominal impedance Z 8 Ohm
Frequency response 100-13000 Hz
Mean sound pressure level 90 dB (1 W/1 m)
Opening angle (-6 dB) 92°/4000 Hz
Excursion limit +/-1,5 mm
Resonance frequency fs 165 Hz"
Possible applications
- Flat screens (TV and PC)
- Electronic assemblies
- Rated power handling: 2 W
- Impedance: 8 Ohm
- Frequency response (-10 dB): 390-20000 Hz
- Average sound pressure level: 79 dB (1 W/1 m)
- Resonant frequency fs: 580 Hz
- Net weight: 20 g
- Connections: JST PHR-2
- Length of connection cable: 120 ± 8 mm
- Temperature range: -20 ... 70 °C
The connection is made via a JST ZHR-2 connector.
possible applications
- model making
- signal output
- Medical equipment
Technical data
- Rated power: 0.25 W
- Music power rating: 0.5 W
- Nominal impedance Z: 8 Ohm
- Frequency range (-10 dB): 800-20000 Hz
- Average sound pressure level: 70 dB (0.1 W/0.1 m)
- Resonant frequency fs: 1000 Hz
- Net weight: 1.58 g
- Connections: JST_ZHR-2
Ready-stripped cable for connection.
Applications:
Use in very small spaces, model making, signal output
• Rated power/music power: 0.5 W/1 W
• Impedance: 8 ohm
• Frequency range (-10 dB): 700 - 20,000 Hz
• Mean sound pressure level: 71 dB (1 W/1 m)
• Xmech excursion limit:
• Resonant frequency: 1100 Hz
• Voice coil diameter: 8 mm
• Baffle opening: 13 mm
• Net weight: 0.002 kg"
Ready-stripped cable for connection.
Applications:
Use in very small spaces, model making, signal output
• Rated power/music power: 0.5 W / 1 W
• Impedance: 50 Ohm
• Transmission range (-10 dB): 700 - 20,000 Hz
• Mean sound pressure level: 71 dB (1 W/1 m)
• Xmech excursion limit:
• Resonance frequency: 1005 Hz
• Upper pole plate height
• Voice coil diameter: 8 mm
• Winding height
• Baffle opening: 13 mm
• Net weight: 0.002 kg"
The exciter can be mounted on the surface of the plate to be excited using adhesive or screws.
Applications
• Signal output in all types of applications where visible speakers cannot be installed for design reasons or to protect against environmental influences or vandalism.
• Rated power/music power: 25 W *)
• Impedance: 8 Ohm
• Voice coil diameter: 32.5 mm
• Net weight: 0.12 kg
Maximum long-term performance in accordance with DIN EN 60268-5
Applications: Control loudspeakers for electronic devices, ceiling loudspeakers in rail vehicles and buses, model construction
Accessories: Protective grille (item no. 4640, 4642, 4670, 4744)
- Rated power: 15 W
- Impedance: 32 Ohm
- Transmission range (10 dB): 100 - 13,000 Hz
- Mean sound pressure level: 87 dB (1 W/1 m)
- Resonance frequency: 160 Hz
- Upper pole plate height: 3 mm
- Voice coil diameter: 15 mm
- Baffle opening: 93 mm
- Connection: 5.2 x 0.5 mm (+)/2.8 x 0.5 mm (-)
- Net weight: 0.16 kg
- Type: 3M VHB 4919F
Adhesive pad for mounting the EX 60 S - 4 Ohm and EX 60 S - 8 Ohm exciter on smooth surfaces.
Accessories from:
- EX 60 S - 8 Ohm
- EX 60 S - 4 Ohm
FR 10 4 OHM
FR 10 8 OHM
FX 10 4 OHM
PX 10 4 OHM
R 10 S 4 OHM
R 10 S 8 OHM
R 10 SC 4 OHM
R 10 SC 8 OHM
Features
- Type: 3M VHB 4919F
Possible applications
- Control loudspeaker for electronic devices
- Ceiling loudspeakers in rail vehicles and buses
- Model making
Connection lugs 5.2 x 0.5 mm (+) and 2.8 x 0.5 mm (-)
- Rated power handling: 20 W
- Impedance: 8 Ohm
- Frequency response (.10 dB): 100 - 13000 Hz
- Average sound pressure level: 90 dB (1 W/1 m)
- Limiting excursion xmech: 1.5 mm
- Resonance frequency: 160 Hz
- Upper pole plate height: 3 mm
- Voice coil diameter: 15 mm
- Winding height: 4 mm
- Baffle opening: 93 mm
as a built-in loudspeaker for electronic devices and public address systems. Corresponds to model R 10 S, but with connection lugs 4.8 x 0.8 mm (+) and 2.8 x 0.8 mm (-).
Possible applications
- Control loudspeaker for electronic devices
- Ceiling loudspeakers in rail vehicles and buses
- Model making
Connection lugs 4.8 x 0.8 mm (+) and 2.8 x 0.8 mm (-)
- Rated power handling: 20 W
- Impedance: 4 Ohm
- Transmission range (.10 dB): 100 - 13000 Hz
- Average sound pressure level: 90 dB (1 W/1 m)
- Limiting excursion xmech: 1.5 mm
- Resonant frequency: 160 Hz
- Upper pole plate height: 3 mm
- Voice coil diameter: 15 mm
- Winding height: 4 mm
- Baffle opening: 93 mm
Applications:
- Signal output in all types of applications where visible speakers cannot be installed for design reasons or to protect against environmental influences or vandalism
- Music power 10 W
- Rated impedance Z 4 ohm
- Voice coil diameter 25.4 mm
- Net weight 0.06 kg
- Connections
4.8 x 0.8 mm (+)
2.8 x 0.8 mm (-) - Temperature range -25 to 70°C
Applications:
- Signal output in all types of applications where visible speakers cannot be installed for design reasons or to protect against environmental influences or vandalism
Technical data
- Music power 10 W
- Rated impedance Z 8 ohm
- Voice coil diameter 20.5 mm
- Net weight 0.04 kg
- Connections
4.8 x 0.8 mm (+)
2.8 x 0.8 mm (-) - Temperature range -25 to 70°C
• Installation hole: ø 74 mm
- Material: plastic
- Colour: black
Accessories from:
- PL 8 RV - 4 Ohm
- Material: plastic
- Colour: black
Accessories from:
- PL 7 RV - 4 Ohm
- PL 7 RV - 8 Ohm
Item no. 4501
Electrodynamic exciter to stimulate bending wave vibrations in plates. The exciter can be mounted on the surface of the plate to be excited using adhesive or screws.
Applications:
- Signal output in all types of applications where visible speakers cannot be installed for design reasons or to protect against environmental influences or vandalism.
- Net weight: 285 g
Accessories from:
- DR 45 N - 8 Ohm
- M 300
- TL 300 MH
Accessories from:
- EZ 60.7 - 100 V
- EZ 40.7 - 100 V
- EZ 97.10 - 100 V
• Includes mounting screws.
• Installation hole: ø 50 mm
Features
- Type: 3M GPH-060GF
The exciter can be mounted on the surface of the plate to be excited using adhesive or screws.
Applications
• Signal output in all types of applications where visible speakers cannot be installed for design reasons or to protect against environmental influences or vandalism.
• Rated power/music power: 25 W *
• Impedance: 4 ohm
• Voice coil diameter: 32.5 mm
• Net weight: 0.12 kg
Maximum long-term performance in accordance with DIN EN 60268-5
Equivalent to model R 10 S - 8 Ohm, but with connectors 4.8 x 0.8 mm (+) and 2.8 x 0.8 mm (-).
Typical applications
Control speakers for electronic devices
Ceiling- mounted speakers in railway carriages and busses
Model construction
Technical Data
Rated power 20 W
Maximum power 30 W
Nominal impedance Z 8 Ohm
Frequency response 100-13000 Hz
Mean sound pressure level 90 dB (1 W/1 m)
Opening angle (-6 dB) 92°/4000 Hz
Excursion limit +/-1,5 mm
Resonance frequency fs 160 Hz"
Description:
This device has been designed to meet the increasing demand for AlInGaP technology.
The package of the VLMK31.. is the PLCC-2.
It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy.
Features:
• SMD LED with exceptional brightness
• Luminous intensity categorized
• Compatible with automatic placement equipment
• EIA and ICE standard package
• Compatible with IR reflow, vapor phase and wave solder processes according to
CECC 00802 and J-STD-020
• Available in 8 mm tape
• Low profile package
• Non-diffused lens: excellent for coupling to light pipes and backlighting
• Low power consumption
• Luminous intensity ratio in one packaging unit IVmax./IVmin. ? 1.6
• Preconditioning according to JEDEC® level 2a
• ESD-withstand voltage: up to 2 kV according to JESD22-A114-B
• AEC-Q101 qualified
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
Applications:
• Automotive: backlighting in dashboards and switches
• Telecommunication: indicator and backlighting in telephone and fax
• Indicator and backlight for audio and video equipment
• Indicator and backlight in office equipment
• Flat backlight for LCDs, switches, and symbols
• General use
Accessories from:
- FR 10 - 4 Ohm
- FR 10 - 8 Ohm
- R 10 S - 4 Ohm
- R 10 S - 8 Ohm
- R 10 SC - 4 Ohm
- R 10 SC - 8 Ohm
- FX 10 - 4 Ohm
- PX 10 - 4 Ohm
- R 10 S TE - 8 Ohm
- R 10 SC Special - 8 Ohm
- R 10 S TE - 4 Ohm
Can be supplied painted in other colours on request.
- Suitable for:
FR 13 4 OHM
FX 13 4 OHM
PX 13 4 OHM
Thanks to a perfect selection of materials and adhesives, the speaker can also be used under extreme environmental conditions, such as in high heat or cold, to provide the necessary bass foundation.
The computer-optimised suspension geometry, striving for the largest possible stroke and small size, allows for enormous sound pressure levels without fear of a sudden limitation.
This makes the W 165 A the perfect match, especially when it comes to high robustness.
Applications:
- Outdoor sound systems
- Speakers for saunas
- Boats, ships and open vehicles
- Sound modules in the automotive area for noise simulation
- Exhaust systems
- ANC systems for noise reduction
Features:
- Temperature resistance up to 150°C.
- Weatherproof
- IP 64
Can be supplied painted in other colours on request.
- Suitable for:
FR 10 4 OHM
FR 10 8 OHM
FR 10 F 4 OHM
FR 10 HM 4 OHM
FR 10 HM 8 OHM
FX 10 4 OHM
R 10 S 4 OHM
R 10 S 8 OHM
R 10 SC 4 OHM
R 10 SC 8 OHM
- Salt-water-resistant
- IP protection class: IP 65 *)
- Functional at low temperatures in accordance with EN 60068-2-1 (-40°C, 96 h)
- Meets the requirements of Germanischer Lloyd (requirements for electrical equipment/cold)
- Plastic: ASA (UL 94:HB, UV/weather resistant)
- Impact-resistant
Sea water resistant 8 cm (3.3"") full range speaker with injected plastic membrane and plastic basket and grille. Fully corrosion-proof and water resistant due to magnetic housing and silicone sheathing on supply line. Clear high-frequency reproduction.
*) IP protection class for the front when installed in a sealed housing
Applications
- Outdoor sound systems
- Loudspeaker for solariums and damp rooms
- Boats, ships and open vehicles
- Rated power: 15 W
- Music power: 25 W
- Nominal impedance Z: 8 ohm
- Transmission range (-10 dB): 100 - 20,000 Hz
- Mean sound pressure level: 84 dB (1 W/1 m)
- Beam angle (-6 dB): 114°/4000 Hz
- Excursion limit: +/-3 mm
- Resonant frequency fs: 158 Hz
- Magnetic induction: 1 T
- Magnetic flux: 190 µWb
- Upper pole plate height: 3 mm
- Voice coil diameter: 20 mm
- Winding height: 4 mm
- Baffle opening: 74 mm
- Net weight: 0.23 kg
- Colour: black
- Connections: 5.2 x 0.5 mm (+)/2.8 x 0.5 mm (-)
- IP protection class: IP 65 *)
- Temperature range: -40 - 80°C
Technical data:
Net weight: 0.282 kg
Installation depth: 90 mm
With coated paper membrane, strong drive and deep-drawn pole plate. Special voice coils and elastic rubber surround for large strokes.
- Music power: 80 W
- Rated power: 50 W
- Impedance: 8 Ohm
- Transmission range: fu - 8,000 Hz
- Mean sound pressure level: 86 dB
- Resonance frequency: 36 Hz
- Installation diameter: 148 mm
- Basket diameter: 187 mm"
Applications
• Narrow ELA lines
• Control speaker for electronic devices
• Modelling
• Electronic musical instruments
Features
• Waterproof membrane
• Metal version
• Temperature resistant to 100°C"
- Moisturised cone
- Metal version
- IP protection class IP X4 *)
3 x 7 cm (1.2"" x 2.8"") full-range loudspeaker with balanced frequency response and clear high-frequency reproduction. Minimal installation dimensions due to use of neodymium magnet system. Applications include compact built-in solutions in TVs as well as in PCs.
*) IP protection class for the front panel when installed in a sealed housing (bonding of the loudspeaker may be necessary)
Applications
- Video monitors
- TV devices
- Control speaker for electronic devices
- ATMs
- Rated power: 3 W
- Nominal impedance Z: 8 ohm
- Transmission range (-10 dB): 160 - 12,000 Hz
- Mean sound pressure level: 78 dB (1 W/1 m)
- Excursion limit: +/-2.4 mm
- Resonant frequency fs: 300 Hz
- Upper pole plate height: 2 mm
- Voice coil diameter: 13.5 mm
- Winding height: 3.6 mm
- Net weight: 24.5 g
- Connections: soldering tags (2.4 x 0.3 mm)
- IP protection class: IP X4 *)
- Temperature range: -20 to 70°C
From the contents:
• Physical principles
• Speaker drive principles
• Technical data and measuring methods
• Sound distortion
• Speaker combinations
• Sound transmission types (enclosed bass reflex, band-pass, TL, horn)
• Crossovers
• Speaker construction
