Used Rode VideoMic Me-C
49.95 EUR
Explore the detailed sheet rich in complete information, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; belongs to the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
Elevate your smartphone videography with the RØDE VideoMic Me-C. This compact directional microphone captures crisp, clear audio, focusing on your voice and reducing unwanted background noise. Its 3.5mm jack allows direct connection to your USB-C mobile device and features a headphone output for real-time audio monitoring. Included furry windshield minimises wind noise for outdoor shooting.
EAN: 0698813007295
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-6 days
Condition: used
Elevate your smartphone videography with the RØDE VideoMic Me-C. This compact directional microphone captures crisp, clear audio, focusing on your voice and reducing unwanted background noise. Its 3.5mm jack allows direct connection to your USB-C mobile device and features a headphone output for real-time audio monitoring. Included furry windshield minimises wind noise for outdoor shooting.
EAN: 0698813007295
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-6 days
Condition: used
Comparison of Similar Products
Used Rode Videomic with Rycote Lyre Shockmount
62.95 EUR
With the explosion of DSLR Videography RODE sought to build the microphone that would put an end to in-camera-microphone woes. Make unworthy audio a thing of the past: the Rode VideoMic is a cold-shoe mounted shotgun microphone with a Rycote Lyre shockmount. The most important thing of course is that the audio is spot on and thanks to shotgun microphone technology you can re-address the balance of ambient audio by focusing the tight pickup pattern on your subject. The result is a smooth natural sound with naturally muted ambient sounds and clear focused subject sounds! Isn't it time the sound quality of your videos was the same standard as the picture quality.
Used Rode VideoMic GO
55.95 EUR
The VideoMic GO is a directional microphone. It utilizes a supercardioid polar pattern to attenuate sounds from the sides, resulting in a signal that sounds closer to the camera, even when shooting in noisy environments or at moderate distances. The integrated shoe mount provides a 3/8" thread for additional mounting options. A foam windshield and 7.9" dual mono 3.5mm coiled output cable is included.
Used Rode VideoMic GO
53.95 EUR
The VideoMic GO is a directional microphone. It utilizes a supercardioid polar pattern to attenuate sounds from the sides, resulting in a signal that sounds closer to the camera, even when shooting in noisy environments or at moderate distances. The integrated shoe mount provides a 3/8" thread for additional mounting options. A foam windshield and 7.9" dual mono 3.5mm coiled output cable is included.
Used Rode VideoMic GO
53.95 EUR
The VideoMic GO is a directional microphone. It utilizes a supercardioid polar pattern to attenuate sounds from the sides, resulting in a signal that sounds closer to the camera, even when shooting in noisy environments or at moderate distances. The integrated shoe mount provides a 3/8" thread for additional mounting options. A foam windshield and 7.9" dual mono 3.5mm coiled output cable is included.
Used Rode VideoMic Me-L
49.95 EUR
Elevate your smartphone videography with the Rode VideoMic Me-L. This compact and lightweight directional microphone upgrades your phone's built-in mic, capturing clear, focused audio. Its cardioid polar pattern reduces background noise, prioritizing the sound directly in front of the mic - perfect for vlogging and interviews. The built-in headphone jack allows for real-time audio monitoring and playback, ensuring you capture pristine audio.
Used Rode VideoMic Me-L
48.95 EUR
Elevate your smartphone videography with the Rode VideoMic Me-L. This compact and lightweight directional microphone upgrades your phone's built-in mic, capturing clear, focused audio. Its cardioid polar pattern reduces background noise, prioritizing the sound directly in front of the mic - perfect for vlogging and interviews. The built-in headphone jack allows for real-time audio monitoring and playback, ensuring you capture pristine audio.
Used Rode VideoMic Pro
41.95 EUR
Rode Videomic Pro This item is sold as seen for spares or repair. Please read the description in full before purchasing. Spares and repair items do not come with a warranty but do represent potentially excellent value. All faults or issues are fully described. Cosmetically this item would be placed within our GOod condition rating. Please Note: This item is functional, however, the cable is damaged and it has exposed wires. For this reason, this item is being sold for spares and repairs.
Catrice GENERATION JOY Blush with Illuminator in a stick shade C02 Make Me Blush 8,5 g
10.25 EUR
Catrice GENERATION JOY, 8,5 g, Highlighter for Women, Characteristics: gives your face a healthy colour adapts to your skin tone gives skin a rested and relaxed look emphasises the natural shape of your face Ingredients: vegan product How to use: Apply to the face using a wide brush and blend in.
Catrice SEEKING FLOWERS Illuminating Powder shade C01 Watch Me Bloom 5,5 g
10.05 EUR
Catrice SEEKING FLOWERS, 5,5 g, Highlighter for Women, Do you feel as though your makeup look is one step away from absolute perfection? If that one step is adding a radiant glow, reach for the Catrice SEEKING FLOWERS highlighter. With subtle, light-reflecting shimmery pigment, it brightens the complexion and creates a radiant finish wherever you apply it. It allows you to accentuate your facial features, highlighting areas such as your cheekbones, the bridge of your nose or the brow bone. Making your complexion look radiant with health and vitality has never been easier. Characteristics: highlights the face perfectly gently highlights selected parts of the face emphasises the natural shape of your face has a creamy texture Ingredients: vegan product How to use: Using a brush, applicator or fingertips, apply blusher to your cheekbones. Blend in.
Used Rode VideoMic GO II
80.95 EUR
The VideoMic GO II is designed to make capturing incredible audio incredibly easy. Ultra-lightweight and compact, with powerful features that are simple to use, it is perfect for all forms of content creation with a camera, smartphone or tablet, or computer. It’s time to take your content to the next level.
Catrice SUMMER OBSESSED Lip Oil with cooling effect shade C03 They See Me Aperollin' 11 g
10.15 EUR
Catrice SUMMER OBSESSED, 11 g, Lip Glosses for Women, Lips as smooth as glass and as reflective as a mirror? The Catrice SUMMER OBSESSED lip gloss can turn this dream into reality. It envelops the lips in a high-gloss formula, smoothing and evening out their surface to mask any lines or wrinkles while giving your lips long-lasting comfort. It promotes their soft appearance, preventing visible dryness that can interfere with your perfect makeup look. In no time at all, it helps you achieve beautifully glossy, luscious lips, making them the centre of attention and irresistibly kissable. Characteristics: moisturises and softens lips details the lips perfectly shimmers Ingredients: vegan product How to use: Apply an appropriate amount of gloss to the lips to increase the appearance of volume instantly.
LIAN COOL205ME-1 - Lian Li LANCOOL 205 Mesh C midi-tower, white
118.38 EUR
Midi-tower in white, optimised for airflow through mesh inserts, for motherboards up to ATX form factor, three ARGB-PWM fans pre-installed, installation of 280-mm radiators possible, removable dust filters included
LIAN COOL205ME - Lian Li LANCOOL 205 Mesh C midi-tower, black
102.87 EUR
Midi-tower in black, optimised for airflow through mesh inserts, for motherboards up to ATX form factor, three ARGB-PWM fans pre-installed, installation of 280-mm radiators possible, removable dust filters included
M-E ME C11-L - Carbon monoxide detector
40.91 EUR
CO Gas Detector with LED DisplayIncrease your safety at home with this CO detector. Carbon monoxide (CO) is a dangerous, colorless and odorless gas that cannot be perceived by humans.
CO detectors are needed when using such things as fireplaces, gas stoves, gas furnaces, oil, wood or tile stoves, and attached garages.
This life-saving device is tested according to the strict, current standard EN 50291.
As a minimum protection, a CO detector should be installed in every room where a fuel appliance is located. In addition, we recommend using one CO detector per bedroom.
- Alerts to elevated levels of carbon monoxide in the room air
- High accuracy and sensitivity
- LED display for CO concentration (3 digits)
- Alarm volume min. 85 dB
- Alarm memory function
- Warning indicators for: low battery, sensor error, battery removal, end of instrument life
- Test/mute function/manual reset
- Incl. 2x 1.5V AAA battery
Power supply
Battery: 2x 1.5V AAA (included)
Package contents:
- 1x C11-L1
- 1x mounting material
- 1x user manual
- 2x AAA battery
RØDE RODE WIMICROCW - Microphone system for smartphones, USB-C, white
194.97 EUR
- Wireless microphone system for smartphones
- Ultra-compact complete system including charging case
- Simple operation - plug and play
- The two wireless microphones can be clipped on, alternatively they can be attached using magnets. Wind protection built into the microphone
- GainAssist automatic level adjustment
- Crystal clear audio quality
- Receiver module with integrated USB-C plug
- Modules pair automatically
- Range: 100 m
- Battery life: 7 hours (21 hours with charging case)
- Charging time: three hours
System requirements:
- Android 11, iOS 14 or newer
- USB-C port
Specifications
- Dimensions of transmitter: 40 x 20 x 17 mm
- Weight of transmitter: 12 g
- Dimensions of receiver: 44 x 24 x 9 mm
- Weight of receiver: 6 g
- Dimensions of charging case: 72 x 58 x 30 mm
- Weight of charging case: 61 g
- Incl. two additional miniature furry wind protection sleeves that can be fitted to the microphone
- Incl. 2x magnetic fastenings for the transmitter modules
- Incl. USB-C to USB-C cable
MERTEN ME 23670325 - Socket with USB charger type A and type C/3.0 A
61.53 EUR
Merten socket with USB charger. - Integrated increased contact protection in accordance with VDE 0620 Part 1.
- USB 2.0 power supply with two ports for simultaneously operating/charging two USB devices with an integrated battery.
- With claw and screw fixing
- With plug-in terminals
- Nominal voltage: AC 100 - 240 V, 50 - 60 Hz
- Own consumption: < 0.15 W USB
- Output voltage: DC 5 V ± 10%
- Rated output current 3000 mA (for both outputs together)
- Material: thermoplastic, brilliant
- Colour: active white, glossy
RUBYCON RUBY 400VXH150ME - Aluminium Electronic Capacitor, radial, 150 µF, 400 V, 105°C
16.14 EUR
• Long service life, 105 °C/5000 h• Compact construction
GOSSEN METRAWATT GMCI U281C - Energy meter, ME, kWh, 2 phases, 5(40)A, M-Bus
156 EUR
Digital 1-phase active energy meter for 2-wire networks, 230 V with direct connection 5(40) AThe 1-phase active energy meters of the METRALINE Energy series are MID certified and offer a space-saving design at a small price.
- MID certified active energy meter for 2-wire mains, 230 V with direct connection 5(40) A Ø
- 4-quadrant measurement: energy input and output Ø
- Ultra compact design 1 TE (18 mm) with integrated M-Bus
- Expandable communication via IR interface
The active energy meters of the METRALINE Energy series enable energy data acquisition for a wide range of applications.
These MID-certified energy meters are the perfect solution when every centimeter counts - cost-efficiently and with the usual GOSSEN METRAWATT quality.
Cost-efficient
Small design including MID approval at a low price
Simple & fast
- Easy installation and integration into existing systems thanks to integrated interfaces
- Parallel interface possible through communication modules
Applications
- The MID-certified energy meter can be used for recording and billing active energy in industry, households, commerce, building services and other applications.
- Energy metering in industry for individual lines or machines
- Measurement of renewable energy from photovoltaic and wind power plants
- Recording and billing of consumption for campsites, shopping centers, residential complexes, boat docks
- Energy metering for hotels, convention centers and trade fairs
- Internal cost allocation for timeshare apartments and sublet industrial buildings
- Consumption billing in business centers
- Set-up of energy metering systems
- Remote transmission of consumption values and cost billing
- Use in wallboxes and charging stations (e-mobility)
- Use in active energy management solutions as well as homeowner solutions
Technical details
- Design for 2-wire networks, 230 V
- 5(40) A direct connection
- Housing according to DIN 43880: 1 TE (18 mm) with integrated interface
- Accuracy class B for active energy according to EN 50470-3 for industry and commerce as well as increased requirements in households
- Suitable for billing purposes thanks to MID approval
- 4-quadrant measurement: energy consumption and output
- Tamper protection thanks to sealable cover
Package contents:
- 1x METRALINE Energy energy meter
- 1x operating instructions DE / EN
GOSSEN METRAWATT GMCI U282C - Energy meter, ME, kWh, 2 phases, 5(80)A, M-Bus
193.11 EUR
Digital 1-phase active energy meter for 2-wire networks, 230 V with direct connection 5(80) AThe 1-phase active energy meters of the METRALINE Energy series are MID certified and offer a space-saving design at a small price.
- MID certified active energy meter for 2-wire mains, 230 V with direct connection 5(80) A
- 4-quadrant measurement: energy consumption and output
- Ultra-compact design 2 TE (36 mm) with integrated M-Bus
- Expandable communication via IR interface
The active energy meters of the METRALINE Energy series enable energy data acquisition for a wide range of applications.
These MID-certified energy meters are the perfect solution when every centimeter counts - cost-efficiently and with the usual GOSSEN METRAWATT quality.
Cost-efficient
Small design including MID approval at a low price
Simple & fast
- Easy installation and integration into existing systems thanks to integrated interfaces
- Parallel interface possible through communication modules
Applications
- The MID-certified energy meter can be used for recording and billing active energy in industry, households, commerce, building services and other applications.
- Energy metering in industry for individual lines or machines
- Measurement of renewable energy from photovoltaic and wind power plants
- Recording and billing of consumption for campsites, shopping centers, residential complexes, boat docks
- Energy metering for hotels, convention centers and trade fairs
- Internal cost allocation for timeshare apartments and sublet industrial buildings Consumption billing in business centers
- Set-up of energy metering systems
- Remote transmission of consumption values and cost billing
- Use in wallboxes and charging stations (e-mobility)
- Use in active energy management solutions as well as homeowner solutions
Technical features
- Design for 2-wire networks, 230 V
- 5(40) A direct connection
- Housing according to DIN 43880: 2 TE (36 mm) with integrated interface
- Accuracy class B for active energy according to EN 50470-3 for industry and commerce as well as increased requirements in households
- Suitable for billing purposes thanks to MID approval
- 4-quadrant measurement: energy consumption and output
- Tamper protection thanks to sealable cover
Package contents:
- 1x METRALINE Energy energy meter
- 1x operating instructions DE / EN
EUROPE CHEMI-CON ECC ZR350470ME6 - electrolytic capacitor SMD, 47 µF, 35 V, 105°C, Low ESR 5.0 x 5.
10.23 EUR
·Rated voltage range : 6.3 to 50V, Nominal capacitance range : 100 to 2,200µF·Solvent resistant type(see PRECAUTIONS AND GUIDELINES)
·Vibration resistance structure
·RoHS Compliant
EUROPE CHEMI-CON ECC ZJ6R3101ME6 - electrolytic capacitor SMD, 100 µF, 6.3 V, 105°C, Low ESR 5 x 5.
10.14 EUR
·Rated voltage range : 6.3 to 35V·Nominal capacitance range : 22 to 1,800µF
·Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
·Vibration resistant structure
·RoHS2 Compliant
·AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information.
GOSSEN METRAWATT GMCI U289C - Energy meter, ME, kWh, 4 phases, 1(6)A, M-Bus
314.25 EUR
Digital 3-phase active energy meter for 4-wire networks, 400 V with connection via current transformer 1(6) AThe 3-phase active energy meters of the METRALINE Energy series are MID certified and offer a space-saving design at a small price.
- MID certified active energy meter for 4-wire mains, 400 V with transformer connection 1(6) A
- 4-quadrant measurement: energy input and output
- Ultra-compact design 4 TE (72 mm) with integrated M-Bus
- Expandable communication via IR interface
The active energy meters of the METRALINE Energy series enable energy data acquisition for a wide range of applications.
These MID-certified energy meters are the perfect solution when every centimeter counts - cost-efficiently and with the usual GOSSEN METRAWATT quality.
Cost-efficient
Small design including MID approval at a low price
Simple & fast
- Easy installation and integration into existing systems thanks to integrated interfaces
- Parallel interface possible through communication modules
Applications
- The MID-certified energy meter can be used for recording and billing active energy in industry, households, commerce, building services and other applications.
- Energy metering in industry for individual lines or machines
- Measurement of renewable energy from photovoltaic and wind power plants
- Recording and billing of consumption for campsites, shopping centers, residential complexes, boat docks
- Energy metering for hotels, convention centers and trade fairs
- Internal cost allocation for timeshare apartments and sublet industrial buildings
- Consumption billing in business centers
- Set-up of energy metering systems
- Remote transmission of consumption values and cost billing
- Use in wallboxes and charging stations (e-mobility)
- Use in active energy management solutions as well as homeowner solutions
Technical features
- Design for 4-wire networks, 400 V
- Connection via current transformer 1(6) A
- Housing according to DIN 43880: 4 TE (72 mm) with integrated interface
- Accuracy class B for active energy according to EN 50470-3 for industry and commerce as well as increased requirements in households
- Suitable for billing purposes thanks to MID approval
- 4-quadrant measurement: energy consumption and output
- Tamper protection thanks to sealable cover
Package contents
- 1x METRALINE Energy energy meter
- 1x operating instructions DE / EN
MERTEN ME MEG4366-0120 - USB charging station insert, type A + C, high power, 45 W
59.46 EUR
USB charging station for extra fast and safe charging of mobile/tablet and notebook devices. Two devices can be driven or charged in parallel (with USB-A and USB-C) with 45 W - that is more than three times more power than the previously available USB sockets with 10.5 - 15 W.The USB power delivery technology (USB-PD) enables extreme charging speeds. However, in order to be able to charge particularly quickly, a specific charger is required in addition to a PD-capable cable. With a Merten high-power USB socket, users have the option of plugging smartphones, laptops and monitors directly into the charging station via USB-C - an additional power supply unit for the socket is no longer needed.
The USB high-power charging station can be used in the Merten System M and Merten System Design switch ranges and can be easily installed in a standard flush-mounted socket or simply retrofitted.
USB outputs: 1x type A + 1x type C.
With mounting frame and claws.
Input voltage: 240 V.
Power consumption: < 0.1 W.
Output power: 45 W with PD technology.
The output voltage and the corresponding current are automatically adjusted by the PD protocol: 5V / 3A 9V / 3A 12V / 3A 15V / 3A 20V / 2.25A for USB C and 5V 1.5A 7.5W for USB A.
Rated operating voltage: 100 - 240 V.
Output voltage: 5 - 20 V.
Safety: this USB charger has electronic overload and temperature protection to increase the level of safety.
Mounting: screws.
Installation: flush into the surface.
Installation depth: 30.8 mm.
Protection class: IK04 (protection against a shock of 0.5 Joule) or IP20 against solid objects and liquids.
Directives: Complies with 2002/95/EC - RoHS Directive, 2002/96/EC - WEEE Directive, 2004/108/EC - Electromagnetic Compatibility, 2006/95/EC - Low Voltage Directive. HS Directive, 2002/96/EC - WEEE Directive, 2004/108/EC - Electromagnetic Compatibility, 2006/95/EC - Low Voltage Directive.
The device is environmentally friendly and complies with Regulation (EC) No 1907/2006.
The USB charger is made of PC (polycarbonate) GF10 FR, making it as resistant as possible. It also has the EAC certificate. Furthermore, it complies with the standards EN 60950-1, EN 62684, ETSI EN 301 489-4.
Completion: a central plate MEG4367-0xxx (System M) or MEG4367-60xx (System Design) is required for the USB charging station insert.
EUROPE CHEMI-CON ECC ZR6R3221ME6 - SMD electrolytic capacitor, 220µF, 6.3V, 105°C, 2000h
10.23 EUR
·Rated voltage range : 6.3 to 50V, Nominal capacitance range : 100 to 2,200µF·Solvent resistant type(see PRECAUTIONS AND GUIDELINES)
·Vibration resistance structure
·RoHS Compliant
MERTEN EL ME USB SET2 - M-SMART, USB socket, type A + C, polar white, glossy
69.28 EUR
The Merten M-Smart complete socket set comprises:1x USB socket insert (ME 23670319)
1x M-Smart frame, single (EL MS 478119)
In one complete set this product provides you with all the components you need to install a socket.
RØDE RODE WIMICROC - Microphone system for smartphones, USB-C, black
194.97 EUR
- Wireless microphone system for smartphones
- Ultra-compact complete system including charging case
- Simple operation - plug and play
- The two wireless microphones can be clipped on, alternatively they can be attached using magnets. Wind protection built into the microphone
- GainAssist automatic level adjustment
- Crystal-clear audio quality
- Receiver module with integrated USB-C plug
- Modules pair automatically
- Range: 100 m
- Battery life: 7 hours (21 hours with charging case)
- Charging time: three hours
System requirements:
- Android 11, iOS 14 or newer
- USB-C port
Specifications
- Dimensions of transmitter: 40 x 20 x 17 mm
- Weight of transmitter: 12 g
- Dimensions of receiver: 44 x 24 x 9 mm
- Weight of receiver: 6 g
- Dimensions of charging case: 72 x 58 x 30 mm
- Weight of charging case: 61 g
- Incl. two additional miniature furry wind protection sleeves that can be fitted to the microphone
- Incl. 2x magnetic fastenings for the transmitter modules
- Incl. USB-C to USB-C cable
IDEC HE1G-L20ME - Safety switch HE1G, DPDT, IP66, 40 - 80°C
324.83 EUR
HE1G-L grip-type, 3-position enabling switchThe noticeable haptic feedback makes it easy to detect the position of the switch.
Ideal for hours of operation due to its light weight.
Main features
- - Ergonomically designed OFF-ON-OFF operation.
- - The switch does not switch on when it is moved from position 3
- (OFF when pressed) to position 1 (OFF when released) (IEC 60204-
- 1, 9.2.5.8).
- - Two contacts are provided so that even if one contact fails due to a
- short circuit, the other contact switches off the
- operation of the machine.
- - The monitor switch has a direct opening function.
- - The pronounced haptic feedback when switching to position 2 (enabling
- position) facilitates detection of the present position of the enabling switch:
- position 1 (OFF), 2 (ON) or 3 (OFF).
- - Lighter operating force in position 2 ensures more comfortable,
- stress-free working during extended periods of operation.
- - Versions with emergency stop switch and pushbutton are
- available.
- - Screw terminal
Standards
- IEC60947-5-1
- EN60947-5-1
- JIS C8201-5-1
- EN60947-5-8
- GS-ET-22, UL508
- CSA C22.2 no. 14
- KIS C IEC60947-5-1/S1-G
MERTEN ME MEG4366-0140 - USB Ladestation-Einsatz Typ A+C mit 21 W Ladeleistung
45.61 EUR
USB-Ladestation zum besonders schnellen und sicheren Aufladen von Mobil-/Tablet-Geräten. Ein Gerät mit 21 Watt betrieben bzw. aufgeladen werden - das ist deutlich mehr als die Leistung der bisher verfügbaren USB-Steckdosen. Das USB-Ladegerät MEG4366-0140 ist ein Gerät mit Befestigungsrahmen und Krallen mit 2 USB-Ausgängen Typ A+C. Die Eingangsspannung dieses Geräts beträgt 220 - 240 V. Die Standby-Leistung liegt unter 0,05W und die Ausgangsleistung dieses USB-Ladegeräts beträgt 21 Watt mit Power Delivery-Technologie. Die Ausgangsspannung und der zugehörige Strom werden durch das Power Delivery-Protokoll automatisch angepasst und schonen so den Akku des angeschlossenen Geräts. Das USB A Anschluss bietet eine maximale Leistung von 18 Watt für kleine elektronische Geräte und unterstützt Schnellladung und proprietäre Protokolle: DC 5V 3A 15W, DC 9V 2A 18W, DC 12V 1.5A 18W. Der USB C Anschluss bietet eine maximale Schnellladeleistung von 21 Watt für mobile Geräte und unterstützt auch PD-Schnellladung und proprietäre Protokolle: DC 5V 3A 15W, DC 9V 2.33A 21W, DC 12V 1.75A 21W, DC 5V-12V 0.1A-3A Max 21W. Die USB A und USB C Anschlüsse liefern zusammen eine maximale Leistung von 17 Watt und maximal 2,4 A für jeden Anschluss. Die hochbelastbaren USB-Ports ermöglichen größer 10t. Steckzyklen. Dieses USB-Ladegerät verfügt über einen OVC III, Überhitzungs-, Kurzschluss-, Einschaltstrom- und Überstromschutz, der das Sicherheitsniveau erhöht. Die Befestigung erfolgt durch Schrauben. Dieses USB-Ladegerät ist sehr robust, mit einer Lebensdauer von 30000 Stunden. bei einer Ausgangsleistung von 21 W bei 25 °C. Dieses Gerät ermöglicht eine bündige Montage. Die Abmessungen sind (B) 71mm x (H) 71mm (T) 30mm. Das USB-Ladegerät ist aus PC (Polykarbonat) GF10 FR hergestellt, was es so widerstandsfähig wie möglich macht. Es erreicht die Schutzklasse IK04, d.h. es ist gegen einen Schlag von 0,5 Joule geschützt. Dieses USB-Ladegerät erreicht die Schutzklasse IP20 gegen feste Gegenstände und Flüssigkeiten. Es eignet sich ideal zum Aufladen von USB-Geräten direkt am Wandladegerät, wodurch externe Ladegeräte überflüssig werden. Das Produkt verfügt über eine Konformitätserklärung (EU), CB-Bericht. Es entspricht den Normen EN-IEC 62368-1, IEC 61000-3-2, EN 61558-1, EN 61558-2-16, EN 50032, EN 55035, EN 50563, EcoDesign 2019/1782/EC, RoHS und REACH.
MERTEN ME MEG2367-0403 - System M Steckdose USB Typ A + Typ C Recycled Plastic schwarz
64.32 EUR
Merten M-Pure Ocean Plastic matt schwarz - edles Design und weniger Plastikabfälle in den WeltmeerenM-Pure Rahmen, Schalter und Steckdosen in matt schwarz beeindrucken durch eine edle und elegante Oberfläche und sind außerdem auch noch besonders nachhaltig. Die attraktive Produktreihe M-Pure schwarz matt umfasst 41 Produkte, die alle aus recyceltem Material hergestellt werden, das aus Industrieabfällen besteht. 10 Produkte von M-Pure matt schwarz werden zusätzlich aus 50% recycelten Fischernetzen gefertigt (sog. Ocean Plastic). Alte Fischernetze werden dafür an Stränden und Küsten und auch direkt bei Fischern eingesammelt, gereinigt, sortiert, zerkleinert und extrudiert. Der Kunststoff wird zu Akulon® RePurposed verarbeitet, einem besonders haltbarem Polyamid mit hervorragenden Funktionseigenschaften. Das Material erfüllt strenge Qualitätskriterien und ist sehr haltbar und widerstandsfähig. Es findet bei der Herstellung von Surfbrettern, Uhren usw. sowie in den Schaltern und Steckdosen der Produktreihe M-Pure matt schwarz Verwendung. Das verwendete Material reduziert damit den Abfall und ist Teil der grünen Initiative von Schneider Electric. Die Produktreihe M-Pure matt schwarz mit ihren edlen, schwarz matten Oberflächen ist die ideale Wahl für alle, die Wert auf ein umweltfreundliches und modernes Design legen.
Für System M. Die Merten System M Steckdose MEG2367-0403 ist eine Schutzkontakt Steckdose mit USB Ladegerät A+C max 3A, in der Farbe schwarz matt. Integrierter erhöhter Berührungsschutz gemäß VDE 0620 Teil 1. USB 2.0 Spannungsversorgung mit zwei Ausgängen zum gleichzeitigen Betreiben/Laden von zwei USB-Geräten mit integriertem Akku. Mit Krallen- und Schraubbefestigung. Mit Steckklemmen. Nennspannung AC 100-240 V, 50-60 Hz. USB Ausgänge Ausgangsspannung DC 5 V +/- 10 %. Das Gerät verfügt über einen USB-A Anschluss 2,4A und einen USB-C Anschluss 3A. Nennausgangsstrom 3000 mA (für beide Ausgänge zusammen). Die Abdeckung ist aus recyceltem Material hergestellt, das aus Industrieabfällen besteht. Die Farbe ist schwarz in Anlehnung an RAL9005 mit einer matten Oberfläche durch die Lackierung. Die Schutzkontakt-Steckdose ist VDE-zertifiziert und für den IP20-Einsatz bei Unter- oder Aufputzmontage entwickelt. Das verwendete Material reduziert den Abfall und ist Teil der Umweltinitiative von Schneider Electric. Material Thermoplast. Farbe schwarz matt.
MERTEN ME MEG4366-0130 - USB charging station insert, 1x type C, high power, 65 W
67.32 EUR
USB charging station for extra fast and safe charging of mobile/tablet and notebook devices. One device can be driven or charged (with USB-C) with 65 W - that is more than four times more power than the previously available USB sockets with 10.5 - 15 W.The USB power delivery technology (USB-PD) enables extreme charging speeds. However, in order to be able to charge particularly quickly, a specific charger is required in addition to a PD-capable cable. With a Merten high-power USB socket, users have the option of plugging smartphones, laptops and monitors directly into the charging station via USB-C - an additional power supply unit for the socket is no longer needed.
The USB high-power charging station can be used in the Merten System M and Merten System Design switch ranges and can be easily installed in a standard flush-mounted socket or simply retrofitted.
USB output: 1x type C.
With mounting frame and claws.
Input voltage: 240 V.
Power consumption: < 0.1 W.
Output power: 65 W with PD technology.
The output voltage and the associated current are automatically adjusted by the PD protocol: 5V 3A 15W / 9V 3A 27W / 12V 3A 36W /15V 3A 45W / 20V 3.25A 65W for USB C.
Rated operating voltage: 100 - 240 V.
Output voltage: 5 - 20 V.
Safety: this USB charger has electronic overload and temperature protection to increase the level of safety.
Mounting: screws.
Installation: flush into the surface.
Installation depth: 30.8 mm.
Protection class: IK04 (protection against a shock of 0.5 Joule) or IP20 against solid objects and liquids.
Directives: Complies with 2002/95/EC - RoHS Directive, 2002/96/EC - WEEE Directive, 2004/108/EC - Electromagnetic Compatibility, 2006/95/EC - Low Voltage Directive. HS Directive, 2002/96/EC - WEEE Directive, 2004/108/EC - Electromagnetic Compatibility, 2006/95/EC - Low Voltage Directive.
The device is environmentally friendly and complies with Regulation (EC) No 1907/2006.
The USB charger is made of PC (polycarbonate) GF10 FR, making it as resistant as possible. It also has the EAC certificate. Furthermore, it complies with the standards EN 60950-1, EN 62684, ETSI EN 301 489-4.
Completion: a central plate MEG4367-0xxx (System M) or MEG4367-60xx (System Design) is required for the USB charging station insert.
EUROPE CHEMI-CON ECC ZR160101ME6 - SMD-Capacitor, 100 µF, 16V, 105 °C, 2000 h
10.24 EUR
·Rated voltage range : 6.3 to 50V, Nominal capacitance range : 100 to 2,200µF·Solvent resistant type(see PRECAUTIONS AND GUIDELINES)
·Vibration resistance structure
·RoHS Compliant
EUROPE CHEMI-CON ECC ZA8003R3ME6 - SMD-Capacitor, 3,3 µF, 80V, 105 °C, 2000 h
10.11 EUR
·Low impedance·Solvent resistant type(see PRECAUTIONS AND GUIDELINES)
·Vibration resistant structure
·RoHS Compliant
·AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information.
EUROPE CHEMI-CON ECC ZR100151ME6 - SMD-Capacitor, 150 µF, 10V, 105 °C, 2000 h
10.23 EUR
·Rated voltage range : 6.3 to 50V, Nominal capacitance range : 100 to 2,200µF·Solvent resistant type(see PRECAUTIONS AND GUIDELINES)
·Vibration resistance structure
·RoHS Compliant
MERTEN ME SM 2367-0414 - System M, socket outlet with USB charger, anthracite
65.77 EUR
Merten MEG2367-0414, socket outlet with USB charger, anthracitePower socket with USB charger type A and type C / 3.0 A.
USB 2.0 power supply with two outputs for simultaneous operation/charging of two USB devices with integrated battery.
Power consumption < 0.15 W USB outputs.
Output voltage DC 5 V +/- 10 %.
Nominal output current 3000 mA (for both outputs together).
System M - variety without limits
In System M, surfaces and materials can be combined almost without limits. Without having to change the inserts, the frames and rockers are easily interchangeable. This makes System M one of the most flexible switch ranges that adapts to all design wishes.
An important part of the diverse solutions and products of the Merten brand are the Merten switch ranges. In this area, Merten offers you a large selection of numerous, high-quality flush-mounted and surface-mounted models for every area of application and every environment. You will always find the right switch at Merten.
EUROPE CHEMI-CON ECC ZR250680ME6 - SMD-Capacitor, 68 µF, 25V, 105 °C, 2000 h
10.23 EUR
·Rated voltage range : 6.3 to 50V, Nominal capacitance range : 100 to 2,200µF·Solvent resistant type(see PRECAUTIONS AND GUIDELINES)
·Vibration resistance structure
·RoHS Compliant
EUROPE CHEMI-CON ECC ZA6304R7ME6 - SMD-Capacitor, 4,7 µF, 63V, 105 °C, 2000 h
10.12 EUR
·Low impedance·Solvent resistant type(see PRECAUTIONS AND GUIDELINES)
·Vibration resistant structure
·RoHS Compliant
·AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information.