TRENDNET TRN TEG-MGBS20 - Mini GBIC, 1000Base-LX

40.91 EUR
Browse the detailed sheet with complete information, compare prices and identify the features of PRODUCTNAME, proposed at the cost of PRICE CURRENCY; belongs to the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
SFP Single Mode LC Module (20km)
TRENDnet's SFP Single Mode LC Module, model TEG-MGBS20, is compatible with standard SFP slots found on network switches and fiber media converters.
Each TEG-MGBS20 single mode fiber SFP is equipped with a duplex LC fiber connection interface, supports high-speed data rates up to 1.25Gbps, and supports gigabit single mode fiber connections for long distance network applications up 20km (12.4 mi.).
Fiber Applications
Long distance fiber networking for manufacturing, business parks, and school campus applications.
Fiber Mode/Distance
Single-mode transceiver spans distances up to 20km (12.4 mi.) at gigabit speeds.
Compatibility
Hot-pluggable with an MSA compliant SFP slot and compatible with fiber cables with LC-type duplex connectors.
Package Contents:
EAN: 0710931140620
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
SFP Single Mode LC Module (20km)
- Compliant with IEEE 802.3z Gigabit Ethernet
- ANSI Fiber Channel compliant
- Small Form-Factor Pluggable (SFP) and Multi-Source Agreement (MSA) compliant
- Supports data rates of up to 1.25Gbps
- Transmission distance of up to 20km (12.4 mi.)
- Low Electromagnetic Interference (EMI) design
- Supports 1310nm singlemode network transmissions
- Duplex LC optical interface
- Low power consumption
TRENDnet's SFP Single Mode LC Module, model TEG-MGBS20, is compatible with standard SFP slots found on network switches and fiber media converters.
Each TEG-MGBS20 single mode fiber SFP is equipped with a duplex LC fiber connection interface, supports high-speed data rates up to 1.25Gbps, and supports gigabit single mode fiber connections for long distance network applications up 20km (12.4 mi.).
Fiber Applications
Long distance fiber networking for manufacturing, business parks, and school campus applications.
Fiber Mode/Distance
Single-mode transceiver spans distances up to 20km (12.4 mi.) at gigabit speeds.
Compatibility
Hot-pluggable with an MSA compliant SFP slot and compatible with fiber cables with LC-type duplex connectors.
Package Contents:
- TEG-MGBS20
- Quick Installation Guide
EAN: 0710931140620
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products

- Mini-GBIC module for single-mode fiber with LC connector type
- For distances up to 80km
- Designed to connect to a standard mini-GBIC slot
The TEG-MGBS80 mini-GBIC single mode module works with standard mini-GBIC slots on most switches.
This single-mode type LC module bridges distances up to 80 km (49.7 miles) and a 1000 Mbps LX (type LC) mini-GBIC connector is included.
- Meets IEEE 802.3z Gigabit Ethernet and Fiber Channel standards
- Industry standard SFP package
- Duplex LC connector
- 1.0625Gbps Fiber Channel compliant
- 1.25Gbps Gigabit Ethernet compliant
- 3.3V supply voltage

- Connect devices up to 30m over Cat6a cable (or better) at 10G speed
- Compliant with IEEE 802.3an 10 Gigabit Ethernet
- Backward compatible with IEEE 802.3bz multi-gigabit (2.5G / 5G) speeds
- Complies with IEEE 802.3ab and IEEE 802.3z Gigabit Ethernet
- Shielded RJ-45 copper interface
- Low Electromagnetic Interference (EMI) design
- Supports Digital Diagnostics Monitoring (DDM)
- Small Form Factor Pluggable (SFP+) and Multi-Source Agreement (MSA) compliant
- Hot-pluggable
- Low power consumption
TRENDnet's 10G RJ-45 copper SFP+ module, model TEG-10GBRJ, converts a standard SFP+ slot into an RJ-45 multi-gigabit port for additional high-speed copper connectivity.
This 10G copper SFP+ module works with standard SFP+ slots commonly found in network switches and fiber media converters.
Save equipment costs by converting a switch's unused SFP+ slots to reliable copper connectivity with TRENDnet's 10G Copper SFP+ Module.
Ethernet distance
Supports network distances up to 98 feet (30m)
Connectivity Interface
RJ-45 10-gigabit port to convert SFP+ to RJ-45
Package Contents:
- TEG-10GBRJ

TRENDnet's 1000BASE-T RJ-45 copper SFP module, model TEG-MGBRJ, converts a standard SFP slot to an RJ-45 Gigabit port for an additional copper connection. This SFP module works with a standard SFP slot commonly found in network switches and fiber media converters. Save equipment costs by using the unused SFP slot of a switch for a copper connection.
- Meets the requirements of IEEE 802.3ab Gigabit Ethernet
- Meets the requirements of Small Form-Factor Pluggable (SFP) and Multi-Source Agreement (MSA)
- Supports data rates up to 1.25 Gbit/s
- Transmission distance up to 100 m (328 feet)
- Exchangeable during operation
- RJ-45 connector

- Hot-pluggable SFP+ transceiver
- SFP+ MSA compliant
- Supported throughput up to 10.5 GBit/s
- Multi Mode fiber for distances up to 550 m (1,804 feet)
- 850 nm wavelength
- Duplex LC connector
- Digital Diagnostics Monitoring (DDM) support
- Operating temperature: 0 to 70 °C (32 to 158 °F)
- Single 3.3 V power supply
TRENDnet's hot-pluggable TEG-10GBSR, 10GBASE-SR SFP+ Multi Mode LC Module, works with a MSA compliant SFP+ slot.
This Multi Mode transceiver spans distances up to 550 meters (1,804 feet), comes with a LC duplex connector, and supports up to 10.5 GBit/s networking throughput speeds.
Digital Diagnostics Monitoring (DDM) captures critical device parameters such as transmit/receive power, temperature, and voltage.
Hot-Pluggable SFP+
Hot-pluggable SFP+ transceiver works with a MSA compliant SFP+ slot
Fiber Wavelength
Compatible with Multi Mode 850 nm transmissions
Fiber Distance
Supports networking for distances up to 550 meters (1,804 feet)
Fiber Port
LC-type duplex connector
DDM Support
Digital Diagnostics Monitoring (DDM) captures critical device parameters such as transmit/receive power, temperature, and voltage
Power Supply
Single 3.3 volt power supply
Operating Temperature
Rated for an operating temperature range of 0 to 70 °C (32 to 158 °F)
Standards
Compliant with SFF-8431, SFF-8432, SFF-8472, FC-PI-4,10G FC, and IEEE802.3ae 10GBASE-SR

The TEG-MGBSX Mini-GBIC Multi-Mode Module works with standard mini-GBIC slots of most switches.
This LC type multi-mode module bridges distances up to 1800 feet (550 m).
- Complies with IEEE 802.3z Gigabit Ethernet standards
- Meets ANSI Fiber Channel Standards
- Small Form Factor Pluggable (SFP) Multi-Source Agreement (MSA) Ports
- Supports data rate up to 1.25 Gbps
- Transmission distance up to 550 m (1800 feet)
- Metal housing design reduces electromagnetic interference (EMI)
- Duplex LC Optical interface
- Exchangeable during operation
- Low power consumption

- GreenNet technology reduces power consumption by up to 70%
- 16 x Gigabit RJ-45 ports
- Robust metal changeover switch with integrated power supply for installation in rack
- Forwarding rate of 32 Gbit/s.
The compact 16-fold GREENnet Gigabit Switch (TEG-S16G) offers high bandwidth, performance, ease of use and reliability, reducing power consumption by up to 70%. GreenNet technology automatically adjusts power consumption as needed, resulting in significant power savings. The integrated GREENnet technology is immediately functional and does not need to be set up first.
With Gigabit speed and a 32 Gbps switch rate in full-duplex mode, you can dramatically increase the efficiency of your office and eliminate all network bottlenecks. The integrated power supply reduces the need for cables and the diagnostic LEDs help to solve network problems. This metal, robust switch can be installed via plug and play and immediately offers a reliable network connection at high speed.
Gigabit Speed
16 Gigabit ports provide high-speed network connectivity for devices and 32 Gbps switching capacity enables smooth traffic with fewer traffic bottlenecks.
Rack-Mountable Design
With a sturdy metal housing and included rack mounting brackets, this switch is ideal for 19-inch 1U rack installations. The fanless design is perfect for quiet environments where silent operation is required.
Energy Saving
Integrated GREENnet technology enables cost savings and reduces power consumption by up to 70% by limiting power consumption per port in times of low connection usage.

- 8x 2.5GBASE-T ports
- IEEE 802.3bz (2.5G) compliant
- Backwards compatible with 10/100/1000Mbps devices
- 40Gbps switching capacity
- Fanless design eliminates noise
- Wall mountable for installation flexibility
Expand your network’s bandwidth and reduce digital bottlenecks with TRENDnet’s Unmanaged 2.5G Switches.
These 2.5G network switches come equipped with 2.5GBASE-T RJ-45 ports that provide higher gigabit speeds capable of up to 2.5Gbps over your existing Cat5e or better cabling.
Each high-speed 2.5G switch features a durable metal enclosure and can be mounted to the wall for setup flexibility.
The fanless design lowers energy consumption and eliminates distracting operating noise.
TRENDnet’s reliable 2.5G switches are cost-effective solutions to increase your network’s throughput.
2.5G Ports
Equipped with 2.5GBASE-T RJ-45 ports that provide higher gigabit speeds capable of up to 2.5Gbps over existing Cat5e or better cabling.
Wall Mountable
The 2.5G switches feature metal housing with a convenient wall mountable design for greater installation flexibility.
Fanless
The fanless design of the 2.5G switches lowers energy consumption costs and eliminates operating noise.
Package Contents:
- TEG-S380
- Quick Installation Guide
- Power adapter (12V DC, 1.5A)

Der 10 Gigabit PCIe SFP+ Netzwerkadapter von TRENDnet, Modell TEG-10GECSFP, verwandelt einen unbelegten PCI Express Slot in einen 10 Gigabit SFP+ Slot. Fortgeschrittene Funktionen unterstützen Jumbo Frame und VLAN Tagging. Die inbegriffenen Standard- und flache Halteklammern sind kompatibel mit Windows® und Linux® Desktop-Computern.
- Konvertiert einen PCIe Slot zu einem 10G SFP+ Slot
- Unterstützt 802.1Q VLAN Tagging
- Standard- und flache Halteklammern inbegriffen
- Unterstützt Windows® und Linux®

TEG-S82g (Version v2.0R)
Plug and Play installation
8 x Gigabit ports
16 Gbps switching fabric
Up to 70% energy savings with GREENnet technology*
Sturdy metal switch
TRENDnet’s 8-Port Gigabit GREENnet Switch provides performance, proven reliability, and power savings of up to 70%*. Eliminate network congestion with Gigabit speeds and total switching capacity of 16 Gbps. Plug and Play this sturdy metal switch for reliable high speed network connectivity.

- 5x 2.5GBASE-T ports
- IEEE 802.3bz (2.5G) compliant
- Backward compatible with 10/100/1000MBit/s devices
- 25GBit/s switching capacity
- Fanless design eliminates operating noise
- Wall mountable for flexible installation
Expand your network bandwidth and reduce digital bottlenecks with TRENDnet's unmanaged 2.5G switches.
These 2.5G network switches feature 2.5GBASE-T RJ-45 ports that enable higher gigabit speeds of up to 2.5Gbps over your existing Cat5e or better cabling.
Each 2.5G high-speed switch features a rugged metal chassis and can be wall-mounted for flexible setup.
The fanless design lowers power consumption and eliminates annoying operating noise.
TRENDnet's reliable 2.5G switches are cost-effective solutions to increase the throughput of your network.
2.5G Ports
Equipped with 2.5GBASE-T RJ-45 ports that enable higher Gigabit speeds of up to 2.5GBps over existing Cat5e or better cabling.
Wall Mountable
The 2.5G switches feature a metal chassis with a convenient wall-mountable design for more installation flexibility.
Fanless
The fanless design of the 2.5G switches reduces power consumption costs and eliminates operational noise.
Scope of Delivery:
- TEG-S350
- Quick installation guide
- 2 power supplies (12V DC, 1.5A)

- 4 x 2.5G RJ-45 ports
- 2 x 10G RJ-45 ports
- Compatible with existing Cat5e or better cabling
- 160 Gbps switching capacity
- Fanless design for silent operation
- Wall mountable
TRENDnet's 6-port 10G switch, model TEG-S762, is a multi-gig switch that offers advanced performance with high bandwidth, ease of use and reliability.
The TEG-S762 multi-gig switch provides two dedicated 10G ports and four dedicated 2.5G ports for high-speed network connectivity with a switching capacity of 60 Gbps.
With its rugged, compact metal chassis and fanless design, the 10G switch is a cost-effective switch solution for high-speed 10 Gigabit network connections.
Network ports
Provides 4 x 2.5GBASE-T ports and 2 x 10G ports for high-speed network connections
10G ports
Provides a cost-effective solution for adding 10G link capability with five 10G ports for high-speed connections over Cat6a cabling (or better)
2.5G Ports
Connects 2.5GBASE-T supported devices at 2.5Gbps for increased throughput over existing Cat5e or better cabling
Fanless
The fanless design of this multi-gig switch lowers power consumption and eliminates operational noise
Package Contents:
- TEG-S762
- Quick installation guide
- Power adapter (12V, 1A)

- 24 x Gigabit RJ-45 ports
- Sturdy metal desktop switch with built-in power supply
- Built-in power supply
- Forwarding rate of 48 GBit/s
- Fanless design
- 1U rackmount brackets included
TRENDnet's 24-port Gigabit desktop switch, model TEG-S25D, offers high bandwidth performance, ease of use and reliability.
With Gigabit speeds and a total switching capacity of 48 Gbps in full-duplex mode, you'll increase your network's efficiency and eliminate network congestion.
An integrated universal power supply organizes cables, and diagnostic LEDs help troubleshoot network problems.
This rugged metal switch plugs-and-plays to provide reliable high-speed network connectivity.
Plug-and-play
Simply power up the switch and plug in your connected devices
Ports
24 Gigabit Ethernet ports
Switch capacity
48 Gbps switching capacity
Chassis Design
With its compact and rugged metal chassis, this switch is well suited for desktop or rackmount installations (brackets included).
Package Contents:
- TEG-S25D
- Quick installation guide
- Rackmount accessories
- Power cord (1.5m / 4.9 feet)

- 16 x Gigabit RJ-45 ports
- Sturdy metal switch
- Built-in power supply
- Forwarding rate of 32 GBit/s
- Fanless design
- 1U 19 inch rack mount brackets included
TRENDnet's 16-port Gigabit switch, model TEG-S17, offers high bandwidth performance, ease of use and reliability.
With Gigabit speeds and a total switching capacity of 32 Gbps in full-duplex mode, you'll increase your network's efficiency and eliminate network congestion.
An integrated universal power supply organizes cables, and diagnostic LEDs help troubleshoot network problems.
This rugged metal switch plugs-and-plays to provide reliable high-speed network connectivity.
Plug-and-play
Simply power up the switch and plug in your connected devices
Ports
16 Gigabit Ethernet ports
Switch capacity
32 Gbps switching capacity
Rackmountable design
With its rugged metal chassis and included rackmount brackets, this switch is ideal for 19-inch 1U rack installations.
Package Contents:
- TEG-S17
- Quick installation guide
- Rackmount accessories
- Power cord (1.5m / 4.9 feet)

- 16 x Gigabit RJ-45 ports
- Sturdy metal desktop switch with built-in power supply
- Built-in power supply
- Forwarding rate of 32 GBit/s
- Fanless design
- 1U rackmount brackets included
TRENDnet's 16-port Gigabit desktop switch, model TEG-S17D, offers high bandwidth performance, ease of use and reliability.
With Gigabit speeds and a total switching capacity of 32 Gbps in full-duplex mode, you'll increase your network's efficiency and eliminate network congestion.
An integrated universal power supply organizes cables, and diagnostic LEDs help troubleshoot network problems.
This rugged metal switch connects easily and provides reliable high-speed network connections.
Plug-and-play
Simply power up the switch and plug in your connected devices
Ports
16 Gigabit Ethernet ports
Switch capacity
32 Gbps switching capacity
Chassis Design
With its compact and rugged metal chassis, this switch is well suited for desktop or rackmount installations (brackets included).
Package Contents:
- TEG-S17D
- Quick installation guide
- Rackmount accessories
- Power cord (1.5m / 4.9 feet)

TRENDnet's 10 Gigabit PCIe network adapter transforms an unused PCI Express slot into a 10 Gigabit Ethernet port.
- Converts a PCIe slot to a 10 G Ethernet port
- Supports 802.1Q VLAN tagging
- Standard and flat retaining clips included
- Supports Windows® and Linux®.
Supports five selectable speeds:
- 10 Gbps
- 5 Gbps
- 2.5 Gbps
- 1 Gbps
- 100 Mbps
jumbo frame
Sends larger packets or Jumbo Frames (up to 16 KB) for better performance
Scope of delivery:
- TEG-10GECTX
- Quick Installation Guide
- CD-ROM (driver and user manual)
- Standard and flat retaining clamps

- 4 x Gigabit ports
- 1 x SFP slot
- 10 Gbps switching fabric
- quality of Service traffic prioritization (802.1p QoS)
- jumbo Frame support
- fanless design
- metal housing
- magnet mount

- 5 x 10G RJ-45 ports
- Supports IEEE 802.3bz 2.5G/5G-BASE-T over Cat5e cabling (or better)
- Supports IEEE 802.3an 10G-BASE-T over Cat6a cabling (or better)
- 100 Gbps switching capacity
- Fanless design for silent operation
TRENDnet's 5-port 10G switch, model TEG-S750, offers advanced performance with high bandwidth, ease of use and reliability.
The TEG-S750 10G switch features five dedicated 10G ports for high-speed network connectivity with a switching capacity of 100 Gbps.
With its rugged, compact metal chassis and fanless design, the 10G switch is a cost-effective switch solution for high-speed 10 Gigabit network connections.
This versatile unmanaged 10G switch also supports 2.5G/5G BASE-T connections for faster throughput over your existing Cat5e cabling (or better).
10G ports
Provides a cost-effective solution for extending 10G link capability with five 10G ports for high-speed connections over Cat6a cabling (or better)
Supports multi-gigabit
This versatile unmanaged 10G switch also supports 2.5G/5G BASE-T connections for higher speeds over your existing Cat5e cabling (or better).
Package Contents:
- TEG-S750
- Quick installation guide
- Power adapter (12 V DC, 1.5 A)

Plug and Play installation
5 x Gigabit ports
10 Gbps switching fabric
Up to 70% energy savings with GREENnet technology
Sturdy metal switch
TRENDnet’s 5-Port Gigabit GREENnet Switch, model TEG-S50g, provides performance, proven reliability, and power savings of up to 70%*. Eliminate network congestion with Gigabit speeds and total switching capacity of 10 Gbps. Plug and Play this sturdy metal switch for reliable high speed network connectivity.

- 24 x RJ45 Gigabit Ethernet
- 2 x SFP+
- 88 Gbps switching capacity
- 1U rack mountable (brackets included)
- Fanless design
- NDAA/TAA-compliant (USA and Canada only)
TRENDnet's 24-port Gigabit switch with 2 x 10G SFP+ slots, model TEG-30262, provides high bandwidth performance, ease of use and reliability.
This 10G SFP switch offers two dedicated 10G SFP+ slots for high-speed network connections, providing a cost-effective solution when adding 10G link capability to an SMB network.
With a rugged metal housing and rack-mount brackets included, the 10G SFP switch is well-suited for 19-inch 1U rack installations.
10G SFP+ switch
Offers two dedicated 10G SFP+ slots for high-speed network connections, providing a cost-effective solution when adding 10G link capability to an SMB network.
Image of the back of a network switch with the ''no fan'' icon indicating the fanless design.
Included in delivery:
- TEG-30262
- Quick-install guide
- Rack-mount accessories
- Power cable (1.8 m/6 ft)

- 4 x RJ45, 2.5 Gigabit Ethernet
- 2 x SFP+
- IEEE 802.3bz (2.5G)-compliant
- IEEE 802.3ae (SFP+)-compliant
- Backwards compatible with 100/1000 BASE-T devices
- 160 Gbps switching capacity
- Compact fanless design eliminates noise
- Wall-mountable for installation flexibility
- NDAA/TAA-compliant (USA and Canada only)
Expand your network's bandwidth and reduce traffic bottlenecks with TRENDnet's unmanaged multi gigabit switches.
This 2.5-G switch with SFP+ support comes equipped with 2.5-G BASE-T RJ45 ports that provide higher gigabit speeds of up to 2.5 Gbps over your existing Cat5e or better cabling.
The 2.5-G switch with 10-G fibre also offers two dedicated 10-G SFP+ ports for high-speed network connections, providing a cost-effective solution when adding 10-G link capability to an SMB network.
The fanless design lowers energy consumption and eliminates distracting operating noise.
TRENDnet's reliable multi-gigabit switches are cost-effective solutions to increase your network's throughput.
Included in delivery:
- TEG-S562
- Quick-install guide
- 2 x mains adapter (12 V, 1 A)

- 5 x RJ45, 2.5 Gigabit Ethernet
- 1 x SFP+
- Compatible with existing Cat5e or better cabling
- Backwards-compatible Ethernet speeds of 1000 Mbps
- Backwards compatible with SFP speeds of 1000 Mbps
- Fanless design eliminates operating noise
- Wall-mountable for installation flexibility
- 45 Gbps switching capacity
- IEEE 802.3bz (2.5G) and IEEE 802.3ae (10G SFP+)-compliant
- NDAA/TAA-compliant (USA and Canada only)
Expand your network's bandwidth and reduce digital bottlenecks with TRENDnet's 6-port 2.5G unmanaged switch with 10G SFP+ port.
These multi-gig switches come equipped with 2.5-G BASE-T RJ45 ports that provide speeds of up to 2.5 Gbps over your existing Cat5e or better cabling, and a 10-G SFP+ port for long-distance fibre networking.
Each multi-gig switch features a rugged metal enclosure and can be mounted to the wall for setup flexibility.
The fanless design lowers energy consumption and eliminates operating noise.
Included in delivery:
- TEG-S5061
- Quick-install setup
- Main adapter (12 V DC, 1 A)

- GREENnet technology reduces power consumption by up to 70%
- 24 x Gigabit Auto-MDIX RJ-45 ports
- Sturdy metal desktop switch with built in power supply
- 48 Gbps forwarding capacity
The 24-Port Gigabit GREENnet Switch, model TEG-S24Dg, provides high bandwidth performance, ease of use and reliability, all while reducing power consumption by up to 70%*. GREENnet technology automatically adjusts power voltage as needed, resulting in substantial energy savings. Embedded GREENnet technology works right out of the box with no management requirement.
Boost office network efficiency and eliminate network congestion with Gigabit speeds and a total switching capacity of 48Gbps with Full-Duplex mode. A built in universal power supply reduces cable clutter and diagnostic LEDs help with network troubleshooting. Plug and Play this sturdy metal switch for reliable high-speed network connectivity.
- 24 x 10/100/1000Mbps Auto-MDIX Gigabit Ethernet ports
- On / off power switch
- Features a 48Gbps forwarding capacity
- Internal power supply reduces clutter
- GREENnet technology reduces electrical power consumption when:
- IEEE 802.3x Flow Control for full-duplex mode
- Back pressure Flow Control for half-duplex mode
- Store-and-Forward switching architecture with non-blocking wire-speed performance
- Integrated address look-up engine with a 16 K MAC address table, and 3.5 MBits RAM data buffer
- Operates and maximizes packet filtering and forwarding rate
- Jumbo Frame support up to 9216 Bytes
- Sturdy metal housing
- Diagnostic LEDs and Plug & Play support
• Ethernet port is not in use
• Connected device is turned off
• Connected device is in power-saving mode
• Based on Ethernet cable length

- GREENnet technology reduces power consumption by up to 70%
- 24 x Gigabit Auto-MDIX RJ-45 ports
- Sturdy metal rackmount switch with built in power supply
- 48 Gbps forwarding capacity
The 24-Port Gigabit GREENnet Switch, model TEG-S24g, provides high bandwidth performance, ease of use and reliability, all while reducing power consumption by up to 70%*. GREENnet technology automatically adjusts power voltage as needed, resulting in substantial energy savings. Embedded GREENnet technology works right out of the box with no management requirement.
Boost office network efficiency and eliminate network congestion with Gigabit speeds and a total switching capacity of 48Gbps with Full-Duplex mode. A built in universal power supply reduces cable clutter and diagnostic LEDs help with network troubleshooting. Plug and Play this sturdy metal switch for reliable high-speed network connectivity.
- 24 x 10/100/1000Mbps Auto-MDIX Gigabit Ethernet ports
- On / off power switch
- Features a 48Gbps forwarding capacity
- Internal power supply reduces clutter
- GREENnet technology reduces electrical power consumption when:
- IEEE 802.3x Flow Control for full-duplex mode
- Back pressure Flow Control for half-duplex mode
- Store-and-Forward switching architecture with non-blocking wire-speed performance
- Integrated address look-up engine with a 8K MAC address table
- 3.5MBits RAM data buffer
- Operates and maximizes packet filtering and forwarding rate
- Rackmount hardware included
- Jumbo Frame support up to 9216Bytes
- Sturdy metal housing
- Diagnostic LEDs and Plug & Play support
• Ethernet port is not in use
• Connected device is turned off
• Connected device is in power-saving mode
• Based on Ethernet cable length

- 24 x Gigabit RJ-45 ports
- Sturdy metal switch
- Built-in power supply
- Forwarding rate of 48 GBit/s
- Fanless design
- 1U 19 inch rack mount brackets included
TRENDnet's 24-port Gigabit switch, model TEG-S25, offers high bandwidth performance, ease of use and reliability.
With Gigabit speeds and a total switching capacity of 48 Gbps in full-duplex mode, you'll increase network efficiency and eliminate network congestion.
An integrated universal power supply organizes cables, and diagnostic LEDs help troubleshoot network problems.
This rugged metal switch plugs-and-plays to provide reliable high-speed network connectivity.
Plug-and-play
Simply power up the switch and plug in your connected devices
Ports
24 Gigabit Ethernet ports
Switch capacity
48 Gbps switching capacity
Rackmountable design
With its rugged metal chassis and included rackmount brackets, this switch is ideal for 19-inch 1U rack installations.
Package Contents:
- TEG-S25
- Quick installation guide
- Rackmount accessories
- Power cord (1.5m / 4.9 feet)

- 8 x RJ45, 2.5 Gigabit Ethernet
- 1 x SFP+
- Compatible with existing Cat5e or better cabling
- Backwards-compatible Ethernet speeds of 1000 Mbps
- Backwards-compatible SFP speeds of 1000 Mbps
- Fanless design eliminates operating noise
- Wall-mountable for installation flexibility
- 60 Gbps switching capacity
- Compatible with IEEE 802.3bz (2.5G) and IEEE 802.3ae (10G SFP+).
- NDAA/TAA-compliant (USA and Canada only)
Expand your network's bandwidth and reduce digital bottlenecks with TRENDnet's 9-port 2.5G unmanaged switch with 10-G SFP+ port.
This 2.5-G switch with an SFP+ port comes equipped with 2.5-G BASE-T RJ45 ports that provide speeds of up to 2.5 Gbps over your existing Cat5e or better cabling, and a 10-G SFP+ slot for ultra-fast, long-distance fibre networking.
Each 2.5-G switch with an SFP+ port features a rugged metal enclosure and can be mounted to the wall for setup flexibility.
The fanless design lowers energy consumption and eliminates operating noise.
Included in delivery:
- TEG-S5091
- Quick-install setup
- Main adapter (12 V DC, 1 A)

- Plug and Play Installation
- 8 Gigabit ports
- 16 Gbit/s switching capacity
- Sturdy metal switch
- Fanless design
TRENDnet's 8-port Gigabit desktop switch, model TEG-S83, offers high bandwidth performance, ease of use, and reliability.
This Gigabit switch increases office network efficiency and eliminates network congestion.
It offers Gigabit speeds and a total switching capacity of 16 Gbps in full-duplex mode.
Integrate this rugged metal Gigabit switch for reliable high-speed network connectivity.
Easy to set up
Simply power up the Gigabit network switch and plug in connected devices.
Ports
8 Gigabit Ethernet ports
Switch capacity
16 Gbps switching capacity
Jumbo Frame
This Gigabit Ethernet switch sends larger packets or jumbo frames (up to 9 KB) to increase performance
Fanless
Fanless design reduces power consumption and eliminates operational noise
Chassis design
Compact and lightweight metal chassis
LED lights
LEDs indicate power, connection and activity
Package Contents:
- TEG-S83
- Quick installation guide
- Power adapter (5V DC, 1A)

TEG-S16Dg (version v1.1R)
The compact 16-fold GREENnet Gigabit Switch (TEG-S16DG) offers high bandwidth, performance, ease of use and reliability, reducing power consumption by up to 70%. The GREENnet technology automatically regulates the voltage as required, so that significant amounts of energy can be saved. The integrated GREENnet technology is immediately functional and does not need to be set up first.
With Gigabit speed and a 32 Gbps switch rate in full-duplex mode, you can dramatically increase the efficiency of your office and eliminate all network bottlenecks. The integrated power supply reduces the need for cables and the diagnostic LEDs help to solve network problems. This metal, robust switch can be installed via plug and play and immediately offers a reliable network connection at high speed.
- 16 x 10/100/1000Mbps Auto-MDIX Gigabit RJ-45 ports
- On/Off Power Switch (Power)
- Forwarding rate of 32 Gbit/s.
Internal power supply reduces cable requirements GREENnet technology saves power when:
1.the Ethernet port is not in use
2.the connected devices are switched off
3.the connected devices are in power saving mode
4.depends on the length of the Ethernet cable
- Energy-efficient Ethernet technology according to IEEE 802.3az (draft 2.0)
- 802.3x flow control in full-duplex mode
- Back-pressure functionality for half-duplex operation
- Store-and-forward switching architecture with block-free line speed
- Integrated Address look-Up Engine, supports up to 8,000 absolute MAC addresses and 2MBits RAM data buffers
- Maximum packet filtering and forwarding rate
- Supports jumbo frames up to 9216Bytes
- Robust Metal Housing
- Diagnostic LEDs and Plug&Play

- 16x 2.5G RJ-45 ports
- Compatible with existing Cat5e or better cabling
- Fanless design eliminates operational noise
- Rack or wall mounting for flexible installation
- 80 Gbps switching capacity
- IEEE 802.3bz (2.5G) compliant
- NDAA/TAA compliant (USA and Canada only)
Expand your network bandwidth and reduce digital bottlenecks with TRENDnet's unmanaged 2.5G switches. These 2.5G network switches are equipped with 2.5GBASE-T RJ-45 ports that enable ultra-fast speeds of up to 2.5 Gbps over your existing Cat5e or better cabling. Each 2.5G high-speed switch has a robust metal housing and can be wall-mounted for flexible setup. The fanless design reduces energy consumption and eliminates operating noise. The rugged metal housing and included rack mount brackets are also ideal for wall mounting or 1U 19'' rack installations. TRENDnet's reliable 2.5G switches are cost-effective solutions for increasing the throughput of your network.
Scope of delivery:
- TEG-S3160
- Quick installation kit
- Accessories for rack mounting
- Mains adapter (12 V DC, 3 A)

- 8 x RJ45, 2.5 Gigabit Ethernet
- 1 x RJ45 10 Gigabit Ethernet
- Compact fanless design eliminates noise
- Wall-mountable for installation flexibility
- 60 Gbps switching capacity
- IEEE 802.3bz (2.5G)-compliant
- IEEE 802.3an (10G)-compliant
- NDAA/TAA-compliant (USA and Canada only)
Expand your network's bandwidth and reduce traffic bottlenecks with TRENDnet's high-speed and reliable multi-gigabit switches.
This multi-gig 2.5-G/10-G switch comes equipped with 2.5-G RJ45 ports that provide ultra-fast speeds of up to 2.5 Gbps over your existing Cat5e or better cabling.
It also offers one dedicated 10-G RJ45 port for an ultra-fast network connection, providing a cost-effective solution when adding 10-G link capability to any SMB network.
The fanless design on this multi-gigabit 2.5-G/10-G switch lowers energy consumption and eliminates distracting operating noise.
TRENDnet's reliable multi-gigabit switches are cost-effective solutions to increase your network's throughput.
Included in delivery:
- EG-S591
- Quick-install setup
- Mains adapter (12 V, 1 A)

- Converts a PCIe slot to a 2.5G Ethernet port
- Supports 802.1Q VLAN tagging
- Standard and flat retaining clips included
- Supports Windows® and Linux®.
- IEEE 802.3ab and 802.3bz compliant
- Supports up to 9KB jumbo frames
The 2.5GBASE-T PCIe network adapter from TRENDnet, model TEG-25GECTX, converts a free PCI Express slot into a 2.5GBASE-T Ethernet port. The 2.5G network adapter includes advanced features like Jumbo Frame and VLAN tagging support. The 2.5G network adapter is compatible with Windows® and Linux® desktop computer designs and includes both standard and low-profile brackets.
- 2.5GBASE-T (2.5Gbps): Cat5e twisted pair over 100m (max.)
- 1000GBASE-T (2.5Gbps): Cat5e Twisted Pair over 100m (max.)
- 100GBASE-TX (100Mbps): Cat5 Twisted Pair over 100m (max.)

- IEEE 802.3z Gigabit Ethernet compliant
- ANSI Fiber Channel compliant
- Small Form-Factor Pluggable (SFP) and Multi-Source Agreement (MSA) compliant
- Wide operating temperature range - 40 to 85 °C (-40 to 185 °F)
- Supports data rates up to 1.25 Gbps
- Transmission range up to 550 m (1804 feet)
- Designed for low electromagnetic interference (EMI)
- Supports 850 nm multi-mode network transmission
- Duplex LC optical interface
- Low power consumption
The 1000Base-SX Industrial SFP Multi-Mode LC Module from TRENDnet, model TI-MGBSX, is designed to operate over a wide temperature range and is well suited for industrial environments.
This SFP module can be used with standard SFP slots found on industrial switches and fiber optic converters.
The TI-MGBSX is compatible with duplex LC fiber optic connectors and supports Gigabit multi-mode fiber optic connections over distances up to 1804 feet (550 m).
SFT hot-swappable
SFP receiver hot-swappable with MSA compliant SFP slot.
Fiber optic wavelength
Compatible with multi-mode 850 nm transmissions
Fibre optic distance
Supports networking at distances up to 1804 feet (550 meters)
Fibre optic interface
Type LC Duplex connection
Operating temperature
Operating temperature range from -40°- 85 °C (-40° - 185 °F)

- Hot-pluggable SFP+ transceiver
- SFP+ MSA compliant
- Supported throughput: up to 10.5 GBit/s
- Single Mode fiber for distances up to 10 km (6.2 miles)
- 1310 nm wavelength
- Duplex LC connector
- Digital Diagnostics Monitoring (DDM) support
- Operating temperature: 0 to 70 °C (32 to 158 °F)
- Single 3.3 V power supply
TRENDnet's hot-pluggable TEG-10GBS10, 10GBASE-LR SFP+ Single Mode LC Module, works with a MSA compliant SFP+ slot.
This Single Mode transceiver spans distances up to 10 km (6.2 miles), comes with a LC duplex connector, and supports up to 10.5 GBit/s networking throughput speeds.
Digital Diagnostics Monitoring (DDM) captures critical device parameters such as transmit/receive power, temperature, and voltage.
Hot-Pluggable SFP+
Hot-pluggable SFP+ transceiver works with a MSA compliant SFP+ slot
Fiber Wavelength
Compatible with Single Mode 1310 nm transmissions
Fiber Distance
Supports networking for distances up to 10 km (6.2 miles)
Fiber Port
LC-type duplex connector
DDM Support
Digital Diagnostics Monitoring (DDM) captures critical device parameters such as transmit/receive power, temperature, and voltage
Power Supply
Single 3.3 volt power supply
Operating Temperature
Rated for an operating temperature range of 0 to 70 °C (32 to 158 °F)
Standards
Compliant with SFF-8431, SFF-8432, SFF-8472, 10G FC Rev 4.0, FC-PI-4 Rev 7.0, and IEEE802.3ae 10GBASE-LR/LW

- Must be used with TEG-MGBS20D5 or other compatible module
- LC-Simplex connector type
- Bi-directional (WDM) SFP module
- Bridges distances up to 20 km (12.4 miles)
- Transmission: 1310 nm / Reception: 1550 nm
TRENDnet's TEG-MGBS20D3, in combination with the TEG-MGBS20D5, creates a single-strand long-haul fiber solution with a range of up to 20 km (12.4 miles).
With this alternative, you can extend your existing two-strand fiber link to create two separate single-strand fiber links.
The SFP interface is compatible with standard SFP slots and features a 1000BASE-LX SFP interface.
Fiber optic applications
Long distance fiber networking for industrial, manufacturing, corporate and campus applications.
Fiber Optic Mode / Distance
Single mode transceiver spans distances up to 20 km (12.4 miles) and supports up to 1.25 Gbps throughput speed.
Compatibility
Compatible with TRENDnet SFP switches, adapters and many third-party SFP solutions.

- Add Four SuperSpeed 5 Gbps USB 3.0 ports
- No CD installation - just Plug and Play
- backward compatible with USB 2.0 ports
- reduced clutter with this compact adapter
- no bulky power adapter - powered by USB port

- Must be used with TEG-MGBS20D3 or other compatible module
- LC-Simplex (single strand) connector type
- Bi-directional (WDM) SFP module
- Bridges distances up to 20 km (12.4 miles)
- Transmission: 1550 nm / Reception: 1310 nm
TRENDnet's TEG-MGBS20D5, when combined with the TEG-MGBS20D3, creates a single-strand long-haul fiber solution with a range of up to 20 km (12.4 miles).
With this alternative, you can extend your existing two-strand fiber link to create two separate single-strand fiber links.
The SFP interface is compatible with standard SFP slots and features a 1000BASE-LX SFP interface.
Fiber optic applications
Long distance fiber networking for industrial, manufacturing, corporate and campus applications.
Fiber Optic Mode / Distance
Single mode transceiver spans distances up to 20 km (12.4 miles) and supports up to 1.25 Gbps throughput speed.
Compatibility
Compatible with TRENDnet SFP switches, adapters and many third-party SFP solutions.
Hot-Plug SFP
Hot-plug SFP receiver is compatible with MSA-compliant SFP slot.
Bi-directional fiber optic link
Transmission: 1550nm / Reception: 1310nm, pairing with TEG-MGBS20D3 or compatible SFP module.
Fiber Optic Distance
Supports networking at distances up to 20 km (12.4 miles)
Fiber optic connector
LC-type simplex connector
Operating temperature
Rated operating temperature range 0 to 70 °C (32 to 158 °F)

- Hardened 100/1000 Base-T Ethernet to SFP converter with IP30 protection
- SFP port supports multi- or single-mode fiber
- Up to 80 km fiber network distances with the TEG-MGBS80 SFP module
- Includes DIN rail and wall bracket
- Extreme -40 to 75 ºC (-40 to 167 ºF) Operating Temperature Range
- Dual redundant power supply with overload protection
TRENDnet's TI-F11SFP is a reliable 100/1000 Base-T to SFP media converter with IP30 protection class and hardened components suitable for extreme industrial conditions.
The converter can be set to 100 / 1000 Mbps throughput speed, Auto Negotiation and Link Fault Pass Through (LFP) using the toggle switches on the front panel.
Dual redundant power supply (power supply sold separately: TI-M6024) with overload protection supports applications requiring zero downtime.
Network Ports
1 x Gigabit Ethernet port and 1 x SFP slot
Toggle switch
- Toggle switch 1: 100 or 1,000 Mbps throughput speed
- Toggle switch 2: Activate/deactivate the port Auto Negotiation
- Toggle switch 3: Converter or switch mode
- Toggle switch 4: Activate/deactivate Link Fault PassThrough
- (LFP) Support
DIN rail/wall bracket
Metal housing with protection class IP30 and included DIN rail and hardware for wall mounting
Switching capacity
2 Gbps switching capacity
Redundant power supply
Dual redundant power supply with overload protection (power supply sold separately: model TI-M6024)
jumbo frame
Sends larger packets or jumbo frames (up to 9 KB) for better performance
Extreme temperatures
Hardened converter is suitable for operating temperature range of -40 to 75ºC (-40 to 167ºF)
Electromagnetic immunity
Complies with FCC Part 15 Subpart B Class A and CE EN 55022 Class A
Certifications
Suitable for information technology equipment (ITE) (EN55022/24) and industrial, scientific and medical equipment (ISM) (EN55011)
Shock and vibration resistant
Shock (IEC 60068-2-27), free fall (IEC 60068-2-32), and vibration certification (IEC 60068-2-6)
Grounding point
Ground point protects equipment from external voltage surges

- 8 x Gigabit PoE+ ports
- 200W PoE+ power budget
- Hardened metal mini switch with IP30 protection class
- Extreme operating temperature range from -40° to 75 °C (-40° to 167 °F)
- 16 Gbps switching capacity
- Includes brackets for DIN rail and wall mounting
- Power supply sold separately (model: TI-S24052, TI-S24048)
- NDAA/TAA compliant
The industrial Gigabit PoE+ DIN rail mini switch (8-port) from TRENDnet, model TI-PGLC80, is a reliable and robust network solution for use in extreme and demanding environments. This industrial Gigabit DIN rail mini switch features an IP30-rated metal housing and is designed to withstand high levels of vibration and shock and operate in both high and low temperatures in industrial environments from -40°C to 75°C (-40° to -167°F). The hardened industrial switch offers four copper Gigabit PoE+ ports and one copper Gigabit port for high-speed device connections. The mini housing is designed to fit into most compact installation spaces.
Installers and integrators can save equipment costs and reduce installation time with TRENDnet's industrial Gigabit PoE+ switches, which deliver up to 30W of PoE power and data per port over existing Ethernet cabling. With PoE technology, users only need one set of cables to transfer both data and power from the industrial unmanaged PoE+ switch. These industrial unmanaged PoE+ switches make it easy to network PoE devices such as high-performance wireless access points, PTZ and other advanced IP cameras, VoIP phone systems, IPTV decoders, access controls and more.
Scope of delivery:
- TI-PGLC80
- Quick installation guide
- Removable terminal strip
- DIN rail and wall mounting hardware

- 8x 10/100Mbps PoE+ ports
- 200W PoE+ power budget
- Hardened metal mini switch with IP30 protection class
- Extreme operating temperature range from -40° to 75 °C (-40° to 167 °F)
- 1.6 Gbps switching capacity
- Includes brackets for DIN rail and wall mounting
- Power supply sold separately (model: TI-S15052, TI-S12048)
- NDAA/TAA compliant
TRENDnet's industrial Fast Ethernet PoE+ DIN rail mini switch (8-port), model TI-PELC80, is a reliable and robust network solution for use in extreme and demanding environments. This industrial Fast Ethernet DIN rail mini switch features an IP30-rated metal housing and is designed to withstand high levels of vibration and shock and operate in both high and low temperatures in industrial environments from -40°C to 75°C (-40° to -167°F). The hardened industrial switch offers four Fast Ethernet PoE+ ports and one Fast Ethernet port for high-speed device connections. The mini housing is designed to fit into most compact installation areas.
Installers and integrators can save equipment costs and reduce installation time with TRENDnet's industrial Fast Ethernet PoE+ switches, which deliver up to 30W of PoE+ power and data per port over existing Ethernet cabling. With PoE technology, users only need one set of cables to transfer both data and power from the industrial unmanaged PoE+ switch. These industrial unmanaged PoE+ switches make it easy to network PoE devices such as high-performance wireless access points, PTZ and other advanced IP cameras, VoIP phone systems, IPTV decoders, access controls and more.
Scope of delivery:
- TI-PELC50
- Quick installation device
- Removable terminal strip
- DIN rail and wall mounting accessories

- 4x 10/100Mbps PoE+ ports
- 1x 10/100Mbps port
- 90W PoE+ power budget
- Hardened metal mini switch with IP30 protection class
- Extreme operating temperature range from -40° to 75 °C (-40° to 167 °F)
- 1 Gbps switching capacity
- Includes brackets for DIN rail and wall mounting
- Power supply sold separately (model: TI-S15052, TI-S12048)
- NDAA/TAA compliant
TRENDnet's industrial Fast Ethernet PoE+ DIN rail mini switch (5-port), model TI-PELC50, is a reliable and robust network solution for use in extreme and demanding environments. This industrial Fast Ethernet DIN rail mini switch features an IP30-rated metal housing and is designed to withstand high levels of vibration and shock and operate in both high and low temperatures in industrial environments from -40°C to 75°C (-40° to -167°F). The hardened industrial switch offers four Fast Ethernet PoE+ ports and one Fast Ethernet port for high-speed device connections. The mini housing is designed to fit into most compact installation areas.
Installers and integrators can save equipment costs and reduce installation time with TRENDnet's industrial Fast Ethernet PoE+ switches, which deliver up to 30W of PoE+ power and data per port over existing Ethernet cabling. With PoE technology, users only need one set of cables to transfer both data and power from the industrial unmanaged PoE+ switch. These industrial unmanaged PoE+ switches make it easy to network PoE devices such as high-performance wireless access points, PTZ and other advanced IP cameras, VoIP phone systems, IPTV decoders, access control and more.
Scope of delivery:
- TI-PELC50
- Quick installation device
- Removable terminal strip
- DIN rail and wall mounting accessories