TP-LINK TPLINK MC112CS - 10/100BaseTX>100Base single mode FXConverter
35.78 EUR
Access the complete sheet with information, compare prices and discover the features of PRODUCTNAME, available at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the sale is managed by SELLER NAME and the production is done by MANUFACTURER NAME.
WDM fast Ethernet media converter
TP-LINK MC112CS - Fibre media converter - 10Base-T, 100Base-FX, 100Base-TX - RJ-45 / SC-single mode - up to 20 km - 1310 (TX) / 1550 (RX) nm
The MC112CS is a media converter designed for converting 100BASE-FX fibre media into 100Base-TX copper media and vice versa. The MC112CS uses WDM technology and requires only one fibre-optic cable for transmitting and receiving data, reducing your cable costs by half. The MC112CS was designed according to the IEEE802.3u 10/100Base-TX standard and the 100Base-FX standard and is intended for use with single mode fibre-optic cables and the SC plug. TheMC112CS supports the long-wave (LX) laser specification for a transfer rate corresponding to the full bandwidth. It functions at 1,310 nm for transmitting data and at 1,550 nm for receiving data. This means that the other end device, which is designed to work with the MC112CS, has to function at 1550nm for transmitting data and at 1310nm for receiving data. Other media converters from TP-LINK that could work with the MC112CS include the MC111CS.
Other features of this module include: the option of using the device as a stand-alone device (no additional enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, auto-tuning in duplex mode at the transmission port and status LED on the front. The MC112CS transmits in fibre-optic long distance mode via the single mode fibre-optic cable up to a distance of 20 km.
• Auto-tuning from 10/100 Mbps and auto MDI/MDI-X at the TX port.
• Offers the switch configuration for the half-duplex/full duplex transmission mode for the FX port.
• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.
• Uses WDM and transmits and receives via a single fibre.
• Fibre-optic transmission distance of up to 20 km.
• Easily visible LEDs display the status, allowing the network to be easily monitored.
• External power supply unit.
EAN: 6935364030421
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
WDM fast Ethernet media converter
TP-LINK MC112CS - Fibre media converter - 10Base-T, 100Base-FX, 100Base-TX - RJ-45 / SC-single mode - up to 20 km - 1310 (TX) / 1550 (RX) nm
The MC112CS is a media converter designed for converting 100BASE-FX fibre media into 100Base-TX copper media and vice versa. The MC112CS uses WDM technology and requires only one fibre-optic cable for transmitting and receiving data, reducing your cable costs by half. The MC112CS was designed according to the IEEE802.3u 10/100Base-TX standard and the 100Base-FX standard and is intended for use with single mode fibre-optic cables and the SC plug. TheMC112CS supports the long-wave (LX) laser specification for a transfer rate corresponding to the full bandwidth. It functions at 1,310 nm for transmitting data and at 1,550 nm for receiving data. This means that the other end device, which is designed to work with the MC112CS, has to function at 1550nm for transmitting data and at 1310nm for receiving data. Other media converters from TP-LINK that could work with the MC112CS include the MC111CS.
Other features of this module include: the option of using the device as a stand-alone device (no additional enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, auto-tuning in duplex mode at the transmission port and status LED on the front. The MC112CS transmits in fibre-optic long distance mode via the single mode fibre-optic cable up to a distance of 20 km.
• Auto-tuning from 10/100 Mbps and auto MDI/MDI-X at the TX port.
• Offers the switch configuration for the half-duplex/full duplex transmission mode for the FX port.
• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.
• Uses WDM and transmits and receives via a single fibre.
• Fibre-optic transmission distance of up to 20 km.
• Easily visible LEDs display the status, allowing the network to be easily monitored.
• External power supply unit.
EAN: 6935364030421
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
TP-LINK TPLINK MC111CS - 10/100BaseTX>100Base single mode FXConverter
48.66 EUR
WDM fast Ethernet media converter• Works according to standards 802.3u 10/100Base-TX, 100Base-FX.
• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.
• Uses WDM and transmits and receives data via a single fibre.
The MC111CS is a media converter designed for converting 100BASE-FX fibre media into 100Base-TX copper media and vice versa. The MC111CS uses WDM and requires only one fibre-optic cable for transmitting and receiving data, reducing your cable costs by half. The MC111CS was designed according to the IEEE802.3u 10/100Base-TX standard and the 100Base-FX standard and is intended for use with single mode fibre-optic cables and the SC plug. The MC111CS supports the long-wave (LX) laser specification for a transfer rate corresponding to the full bandwidth. It functions at 1550nm for transmitting data and at 1310nm for receiving data. This means that the other end device, which is designed to work with the MC111CS, has to function at 1310nm for transmitting data and at 1550nm for receiving data. Other media converters from TP-LINK that could work with the MC111CS include the MC112CS.
Other features of this module include: the option of using the device as a stand-alone device (no additional enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, auto-tuning in duplex mode at the transmission port and status LED on the front. The MC111CS transmits in fibre-optic long distance mode via the single mode fibre-optic cable up to a distance of 20 km.
• Auto-tuning from 10/100 Mbps and auto MDI/MDI-X at the TX port.
• Offers the switch configuration for the half-duplex/full duplex transmission mode for the FX port.
• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.
• Uses WDM and transmits and receives via a single fibre.
• Fibre-optic transmission distance of up to 20 km.
• Easily visible LEDs display the status, allowing the network to be easily monitored.
• External power supply unit.
TP-LINK TPLINK MC110CS - 10/100BaseTX>100Base single mode FXConverter
46.02 EUR
Fast Ethernet single mode media converter• Works according to standards IEEE802.3u (10/100Base-TX, 100Base-FX)
• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.
• Offers the switch configuration for the half-duplex/full duplex transmission mode for the FX port.
• Fibre-optic transmission distance of up to 20 km.
The MC110CS is a media converter designed for converting 100BASE-FX fibre media into 100Base-TX copper media and vice versa. The MC110CS was designed according to the IEEE802.3u 10/100Base-TX standard and the 100Base-FX standard and is intended for use with multimode/single mode fibre-optic cables with SC plug. The MC110CS supports the long-wave (LX) laser specification for a transfer rate corresponding to the full bandwidth. It transmits and receives at a wavelength of 1310nm.
Other features of this module include: the option of using the device as a stand-alone device (no additional enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, auto-tuning in duplex mode at the transmission port and status LED on the front. The MC110CS transmits in fibre-optic long distance mode via the multimode fibre-optic cable up to a distance of 20 km.
• Auto-tuning from 10/100 Mbps and auto MDI/MDI-X at the TX port.
• Offers the switch configuration for the half-duplex/full duplex transmission mode for the FX port.
• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.
• Fibre-optic transmission distance of up to 20 km.
• Easily visible LEDs display the status, allowing the network to be easily monitored.
• External power supply unit
TP-LINK TPLINK MC210CS - 1000BaseTX>1000Base FX single mode converter
51.28 EUR
Gigabit Ethernet media converter• Complies with the standards IEEE802.3ab and IEEE802.3z.
• FX-port toggles between force and auto mode.
• Fibre-optic transmission distance of up to 15 km
The MC210CS is a media converter designed for converting 1000BASE-LX/LH fibre media into 1000Base-T copper media and vice versa. The MC210CS was designed according to the 1000Base-T standard (IEEE802.3ab) and the 1000Base-LX/LH standard (IEEE802.3z) and is intended for use with single fibre-optic cables and the SC plug. The MC210CS supports the long-wave (LX) laser specification for a transfer rate corresponding to the full bandwidth. It functions at 1310nm for both transmitting and receiving data.
Other features of this module include: the option of using the device as a stand-alone device (no enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, and status LED on the front. The MC210CS transmits inn fibre-optic long distance mode via the single mode fibre-optic cable over a distance of up to 15 km.
• Works at 1000 Mbps for both the TX port and also for the FX port in full duplex mode.
• TX port with support for auto MDI/MDIX
• Provides the switch configurations for force mode and auto transfer modes for the FX-port
• Fibre-optic transmission distance of up to 15 km.
• Easily visible LEDs display the status, allowing the network to be easily monitored.
• External power supply unit.
TP-LINK TPLINK MC100CM - 100Base TX > 100Base SC multimode converter
43.02 EUR
The MC100CM is a media converter for converting 100BASE-FX fiber to 100Base-TX copper media or vice versa. The MC100CM is designed according to the IEEE 802.3u 10/100Base-TX and 100Base-FX standards and is intended for use with multimode fiber optic cables with SC connectors. The MC100CM supports the long-wave laser (LX) specification at full transmission speed. It operates at 1310nm for both transmitting and receiving data.Other features of this module include the ability to be used as a standalone device (no chassis required) or with TP-LINK's MC1400 chassis, Auto MDI/MDI-X for the TX port, auto-negotiation of duplex mode. The MC100CM transmits at extended fiber distances using multimode fiber up to 2 kilometers.
- LED indicators allow easy monitoring of network activity
- Fits into an MC1400 housing
- Supports 10/100 Mbps and Gigabit data rates for a wide range of requirements
Included:
- MC100CM
- power supply
- Installation manual
TP-LINK TPLINK TAPO C210 - Surveillance camera, IP, WLAN, indoor
45.77 EUR
Indoor WLAN Security Camera- Pan and tilt
- 3MP ultra high definition
- Two-way audio
- Night vision
- Motion detection
- Privacy Mode
- Local memory (SD card not included in package contents)
Detects motion and sends you alerts immediately
Burglaries in your home are exactly what we want to prevent.
Install a camera at the entrance of your home, garage or basement to ensure the safety of your family and property.
Receive a notification when the home camera detects unusual movement.
This could be a notification of package arrival or a suspicious intrusion.
Trigger light and sound effects to deter unwanted visitors.
Advanced night view protects you while you sleep
Sleep safely at night. Let your camera watch over your home while you sleep soundly.
The 850nm infrared night vision sensor supports automatic color filtering in low-light conditions and provides up to 10 meters of visibility.
High-resolution video
Capture every detail in 3MP ultra-high definition.
See exactly what happened in front of your camera.
Live view and two-way audio
Two-way audio lets you communicate with those at home.
Privacy mode and secure local storage ensure your privacy
You can enable the privacy mode, which can shut down the surveillance to further ensure the privacy security.
In addition, Micro SD local cart storage prevents internet hacking incidents.
- Privacy Mode
Turn off the monitoring to protect your privacy whenever you want. - Local Storage
A microSD card stores up to 256 GB, which is equivalent to 512 hours (21 days) of footage.
Get a detailed overview of your room
A wide field of view is covered to capture every moment.
Share your favorite moments
Delightful and amusing moments are worth sharing - especially with faraway friends and family members.
Package contents:
- Tapo Pan/Tilt Home Security Wireless Camera
- Power adapter
- Quick start guide
- Mounting screws
- Mounting plate
- Camera base
TP-LINK TPLINK WPA7617K - Powerline Kit (2 devices)
102.92 EUR
AC1200 AV1000 Gigabit WLAN Powerline Adapter Kit with Power Outlet- 1x RJ45 10/100/1000
- 300 m range over existing electrical wiring
- 867 Mbit/s at 5 GHz
- 300 Mbit/s at 2.4 GHz
Homeplug AV2 standard compliant.
Provides users with stable high-speed data transmission rates of up to 1000 Mbps over a line length of up to 300 meters
Dual-band 802.11ac WLAN.
AC1200 dual-band WLAN (867 Mbps at 5 GHz and 300 Mbps at 2.4 GHz) allows you to stream, play, email, surf and post to your wireless devices throughout your home
Automatic Wi-Fi Sync.
Simply copy your router's Wi-Fi settings and apply any changes to your secure powerline network with WLAN Clone and WLAN Move
Gigabit Ethernet port.
Provide reliable high-speed wired connections for game consoles, smart TVs, and NAS
Plug, Pair and Play.
Quickly set up a secure powerline network
Package Contents:
- AV1000 Powerline Wi-Fi Kit
- 2x network cables
- Instruction
TP-LINK TPLINK MC200CM - 1000Base TX > 1000Base SC M.-mode converter
53.31 EUR
The MC200CM is a media converter designed for converting 1000BASE-SX fibre media into 1000Base-TX copper media and vice versa. The MC200CM was designed according to the IEEE802.3ab 1000Base-T standard and IEEE802.3z 1000Base-SX standard and is intended for use with multimode fibre-optic cables and the SC plug. The MC200CM supports the long-wave (LX) laser specification for a transfer rate corresponding to the full bandwidth. It functions at 850nm for both transmitting and receiving data.Other features of this module include: the option of using the device as a stand-alone device (no enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, and status LED on the front. The MC200CM transmits in fibre-optic long distance mode via the multimode fibre-optic cable up to a distance of 550 m.
• Complies with standards IEEE 802.3ab and IEEE 802.3z.
• Fibre-optic transmission distance of up to 0.5 km
TP-LINK TPLINK TG-3468 - PCI-Express network interface card, 10/100/1000 Mbit/s
21.31 EUR
Gigabit PCI Express network adapter, 10/100/1000 Mbps- 1x RJ45 Gigabit Ethernet
- 1x 32-bit PCIe
System requirement
- Supports Windows 10/8.1/8/7/Vista/XP
Space-saving use
Compared to the normal pluggable network card, the TG-3468 is also suitable for mini-tower computers.
Energy and power efficient
With Wake-on-LAN, your network equipment is particularly efficient to manage and centrally control.
Your network card is automatically set to operating mode when signals are transmitted.
Scope of delivery:
- Gigabit PCI Express network adapter TG-3468
- Quick start guide
- Driver
- Low-profile bezel
TP-LINK TPLINK TLSM5310T - Mini GBIC, 10GBaseT
61.62 EUR
10G BASE-T RJ45 SFP+ ModuleThe TL-SM5310-T provides superior 10G performance for easy and fast connection between your SFP+ interface and an RJ45 port.
With up to 30m range at 10Gbps over UTP cat.6a network cable (or higher) and plug and play design, this module allows you to easily deploy 10Gbps speeds without even needing a technician.
The high-quality metal housing ensures high robustness and reliability over a long period of time, ensuring a stable connection in a wide range of deployment scenarios.
- Supports 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T and 100BASE-TX
- Data transmission up to 30m* at 10Gbps (UTP Cat.6a or higher)
- Supports DDM (temperature and voltage)
- Hot-pluggable SFP+ footprint features
- Supports TX disable function
- Commercial product Operating temperature range: 0-70°C
- Fully metallic housing for low EMI
Package contents:
- 10G BASE-T RJ45 SFP+ Module TL-SM5310-T
- Installation guide
TL-SM5310-T is fully compatible with all current TP-Link switches that offer SFP+ ports , but with various fiber devices from other manufacturers.
TP-LINK TPLINK TLSG1210P - Switch, 10-Port, Gigabit Ethernet, PoE+, 1x SFP
112.69 EUR
10-Port Gigabit Desktop Switch with 8-Port PoE+- 9 10/100/1000Mbps RJ45 ports, 1 Gigabit SFP port
- With 8 PoE+ ports, transfers data and power on one single cable
- Working with IEEE 802.3af/at compliant PDs, expands home and office network
- 802.1p/DSCP QoS enable smooth latency-sensitive traffic
- High PoE power budget with up to 30W for each PoE port and 63W for all PoE ports
- Easy to use, with no configuration and installation needed
Surveillance
Work with IP Cameras
Conference Call
Work with IP Phones
Wi-Fi Coverage
Work with Omada EAPs
Power over Ethernet
Port 1-8 of the switch support Power over Ethernet (PoE) function.
These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).
Intelligent Power Management
When total power consumption excels 63W, the intelligent power management will cut the lower priority port power off to ensure the high priority port’s power supply and protect the device from power overload operation.
Qos for Fluent Online Experience
Administrators can designate the priority of traffic based on QoS, for example, to ensure that voice and video applications remain clear and lag-free.
IGMP Snooping Traffic Optimization for IPTV
IGMP Snooping optimizes multimedia traffic delivery, to ensure a better network experience especially for applications like IPTV.
Sturdy Metal Casing
Sturdy, compact metal casing, with desktop/wall-mounting design, to meet your needs in any environment.
Besides, fanless design ensures quiet operation.
TP-LINK TPLINK SG2210MP - Switch, 10-Port, Gigabit Ethernet, PoE+, SFP
168.04 EUR
Jetstream 8-port Gigabit Smart PoE switch with 2 SFP slots- 116 W PoE power:
8× IEEE802.3at/af compliant PoE+ ports with a total power of up to 150 W*. - All Gigabit Ports:
8× gigabit PoE+ ports and 2× gigabit SFP slots enable high-speed connections - Optimized voice and video applications:
L2/L3/L4 QoS and IGMP snooping.
Zero-Touch Provisioning (ZTP)**, centralized cloud management and intelligent monitoring.
IP-MAC Port Binding, ACL, Port Security, DoS Defend, Storm Control, DHCP Snooping, 802.1X, Radius Authentication, and much more.
Centralized Cloud Management
Integration with the Omada SDN Platform
Advanced Layer 2 functions
L2/L3/L4 QoS, ACL, IGMP Snooping and more
Comprehensive security strategies
Robust LAN protection
PoE+Performance
8 PoE+ ports with a total power of up to 116 watts*
Software Defined Networking (SDN) with cloud access
The Omada SDN (Software Defined Networking) integrates network infrastructure products such as access points, switches and gateways to enable 100% centralized cloud management.
Omada enables highly scalable networks, all controlled from a single interface.
It seamlessly provides simultaneous WLAN and LAN connectivity to create the optimal network for hospitality, education, retail, offices.
*The PoE performance is based on laboratory conditions. Actual maximum PoE performance cannot be guaranteed as it depends on the environment and the PoE client.
**Zero-Touch provisioning requires the cloud-based Omada controller
TP-LINK TPLINK SX3206HPP - Switch, 6-Port, 10 Gigabit Ethernet, PoE++, SFP+
609.39 EUR
JetStream 6-Port 10GE L2+ Managed Switch with 4-Port PoE++ - 4x RJ45 10 Gigabit Ethernet (PoE+)
- 2x SFP+
- 1x RJ45 Console Port
- 1x Micro-USB Console Port
- 2x fan
- 200 W PoE total power budget
- 120 GBit/s switching capacity
Lightning fast connectivity with full 10GE ports
Build and expand your lightning-fast network with the TP-Link TL-SX3206HPP - a fully managed switch with full 10GE RJ45 and fiber ports and 120 Gbps switching capacity.
The four 10GE RJ45 ports with auto-negotiation for 5-speed connections (100Mbps/1G/2.5G/5G/10G) provide optimal performance. Two 10GE SFP+ slots provide non-blocking switching performance and ultra-low latency, enabling reliable and lightning-fast connections to servers and other switches with ease.
Seamless Integration with Omada Cloud SDN
Omada's Software Defined Networking (SDN) platform integrates network devices, including access points, switches and routers, and provides 100% centralized cloud management.
Omada creates a highly scalable network controlled from a single interface.
Seamless WLAN and LAN connections are provided, ideal for use in hospitality, education, retail, offices and more.
Advanced L3 features
A wealth of L2+ and L3 features are supported to build a highly scalable and robust network that provides a reliable and efficient solution for enterprises, campuses and ISPs.
Package contents:
- TL-SX3206HPP Switch
- Power cord
- Manual
- Rackmount Kit
- Rubber feet
TP-LINK TPLINK TL-SG3210 - Switch, 10-Port, Gigabit Ethernet, SFP
123.6 EUR
JetStream 8-Port Gigabit L2+ Managed Switch with 2 SFP Slots- 8x RJ45 Gigabit Ethernet
- 2x Gigabit SFP Slots
- 1x RJ45 console port
- 1x Micro-USB Console Port
- Fanless
- 20 GBit/s switching capacity
Software Defined Networking (SDN) with cloud access
Omada's Software Defined Networking (SDN) platform integrates network devices, including access points, switches and gateways, and provides 100% centralized cloud management.
Omada creates a highly scalable network controlled from a single interface.
Seamless wireless and wired connections are centrally controlled and are ideal for use in areas such as hotels and restaurants, education, retail, offices and more.
Advanced QoS
Voice and video traffic can be prioritized based on IP address, MAC address, TCP port number, UDP port number and more.
Quality of Service (QoS) keeps voice and video services running smoothly, even when bandwidth is tight.
IPv6 support
IPv6 features such as dual IPv4 / IPv6 stacking, MLD snooping, IPv6 ACL, DHCPv6 snooping, IPv6 interface, Path Maximum Transmission Unit (PMTU) discovery, and IPv6 Neighbor Discover ensure your network is ready for the Next Generation Network (NGN) without upgrading your hardware.
Package contents:
- TL-SG3210 Switch
- Power cord
- Manual
- Rackmount Kit
- Rubber feet
TP-LINK TPLINK SF1024 - 24-Port 10/100Mbps Rackmount Switch
71.96 EUR
- 24 10/100Mbps RJ45 ports
- Innovative energy-efficient technology saves power up to 75%
- Supports MAC address self-learning and auto MDI/MDIX
- Standard 19-inch rack-mountable steel case
What This Product Does
The 24-Port 10/100Mbps Rackmount Switch TL-SF1024 provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 100Mbps network. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1024 can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network.
TP-LINK Green Technology
This new generation The 24-Port 10/100Mbps Switch TL-SF1024D features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. It also complies with the EU'S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled.
High Performance
The rack-mount size steel case design, combined with a safety-certified internal power supply, make the switch the most robust product, which is very cost-effective for a less than 16-user environment. Featuring non-blocking switching architecture, TL-SF1024 forwards and filters packets at full wire-speed for maximum throughput. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1024 work reliably.
Easy to Use
The auto features of this fast ethernet switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100 Mbps) and intelligently adjusts for compatibility and optimal performance.
TP-LINK TPLINK TSG1210MP - Switch, 10-Port, Gigabit Ethernet, PoE+, RJ45/SFP
130.62 EUR
10-Port Gigabit Desktop Switch with 8-Port PoE+- 9x RJ45 Gigabit Ethernet Port (8x PoE+)
- 1x SFP/RJ45 combo port
- Fanless
- 123 W PoE total power
- 20 GBit/s switching capacity
Dedicated 8 PoE+ ports (123 W budget) for multiple applications
Compliance with 802.3af/at PoE+ standard supports up to 30 W on each PoE port.
The total 123 W PoE power budget* for the 8× PoE+ ports opens up a wide range of applications, such as office, home and small business surveillance.
It is fully compatible with IP cameras, access points, IP phones, computers, printers and more.
Port prioritization
Ensures the quality of sensitive applications such as video and voice in critical business areas by prioritizing port 1-2 data.
Enhanced with port isolation
Isolation mode easily splits traffic for ports 1-4 or 5-8 to prevent snooping/manipulation and isolates broadcast storm for higher security.
Package contents:
- TL-SG1210MP
- Power Adapter
- Installation Guide
* PoE budget calculations are based on lab tests. Actual PoE power budget is not guaranteed and may vary due to customer limitations and environmental factors.
TP-LINK TPLINK FS310GP - Switch, 10-Port, Gigabit Ethernet, SFP, PoE+
108.61 EUR
10-Port Gigabit Smart Switch with 8-Port PoE+- 8x RJ45 Gigabit Ethernet (PoE+)
- 2x SFP
- Fanless
- 61 W PoE total power budget
Festa - A network solution for small businesses, no IT required
Festa offers business features with consumer-friendly simplicity.
The free cloud-based centralized management is accessible via the Festa app or web and provides essential features for small businesses without the complexity required for larger operations.
Power over Ethernet, flexible network installation
Transfer both data and power over a single cable to other 802.3af PoE or 802.3at PoE+ devices without the hassle and cost of installing power cables.
Automatically detect and deliver the required power to PoE-enabled devices.
VLAN for security
Helps create a network with higher security and better overall performance by dividing the network into smaller groups.
Link aggregation for doubled speeds
Combine two Gigabit links into a single logical link to get up to 2 Gbps connectivity, along with increased reliability and availability.
IGMP Snooping
Ensures a better network experience for applications such as IPTV by optimizing the delivery of multimedia traffic.
Access Control List
Increases security by restricting unauthorized users' access to business-sensitive information.
Included:
- Festa FS310GP
- power supply unit
- Installation instructions
- Silicone feet
TP-LINK TPLINK TX401 - Network card, PCI Express, 10 Gigabit Ethernet, 1x RJ45
113.26 EUR
PCIe 3.0 Slot to 10 Gigabit Ethernet Network AdapterUpgrade to 10G Networking
10 Gigabit Ethernet reaches blazing-fast data rates up to 10 billion bits per second—10× faster than standard Gigabit Ethernet.
It’s a brand-new era for all your bandwidth-intensive tasks from local data transfers to internet access.
- 10 Gbps Internet Access
Make Full Use of Your High-Speed Internet Access - 10 Gbps NAS Connection
Lightning-Fast Local Data Transmissions - 10 Gbps Host Server Building
High Hardware Configuration for a Powerful Server
Play Never Ends with 10G
With 10 Gbps internet access, your gaming will be fully optimized with a large boost in speed, latency, and responsiveness.
Large-sized game downloads, seamless live streaming, and massive data backups via the cloud are as easy as choosing your character.
Local Data Transmissions in Seconds
For local connections, a 10G PCIe adapter helps build a lightning fast transport channel between a central server and other working machines in your local network.
Local data transmissions will be a breeze for you as you handle bandwidth-intensive tasks easily at your home or office.
Versatile, Multi-Speed Compatibility
10GBase-T is backwards compatible with multiple data rates, including 10 Gbps, 5 Gbps, 2.5 Gbps, 1 Gbps, and 100 Mbps Base-T connectivity.
The 10G Ethernet port automatically negotiates between higher and lower speed connections, allowing you to upgrade to 10G networking smoothly.
QoS Support - A Bandwidth Buff for Gaming
Quality of Service technology ensures enough bandwidth and avoids network congestion for PC gaming.
It delivers prioritized performance for gamers.
Strengthened PCI Express 3.0 ×4
Supports PCI Express Gen3 ×4 for more efficient data transmissions
Easy Setup
Simple software installation with the intuitive Utility on the provided CD
Comprehensive System Support
Fully compatible with Windows 10/8.1/8/7, Windows Servers 2019/2016/2012 R2, Linux.
Package Contents
- Standard/Low-Profile Brackets
- Quick Installation Guide
- Resource CD
- 1.5 m CAT6A Ethernet Cable
TP-LINK TPLINK TLSM5110S - Mini GBIC, 10GBase-SR LC, multimode
40.86 EUR
10GBase-SR SFP+ LC Transceiver Module.- Multi-mode SFP+ LC transceiver module .
- Hot-pluggable with the maximum of flexibility .
- Supports Digital Diagnostic Monitoring (DDM)
- Compatible with 10G Small Form Pluggable Multi-Source Agreement (SFP+ MSA)
- Compatible with switches with 10G SFP+ ports, such as the JetStream TL-SG3428X, the TL-SG3428XMP and many more.
The TL-SM5110-SR is designed to extend the transmission distances of 10Gbps network connections.
This SFP+ module is a high-performance 10GBASE-SR 850nm multimode SFP+ transceiver.
It supports full-duplex 10G Ethernet links up to 300m with 50/125µm or 33m with 62.5/125µm fiber cables.
TP-LINK TPLINK TLPOE10R - Power over Ethernet (POE) splitter
25.96 EUR
The TL-POE10R PoE splitter is fully compatible with the IEEE802.3af standard and can be used with all IEEE802.3af PoE-compatible PSE (Power Source Equipment) or PoE supplier adapters such as the TL-SF1008P or TL-POE150S from TP-LINK or with other equivalent products to provide 12 V, 9 V or 5 V DC voltage where there are no power lines or outlets, and where you would like to use devices such as APs, IP cameras or IP phones. - IEEE 802.3af compatible
- Provides energy at a distance of up to 100 metres
- Output voltage: 12 V DC, 9 V DC or 5 V DC
- Plug and play, requires no configuration
TP-LINK TPLINK TL-SM331T - Mini GBIC, 1000BaseT
40.95 EUR
1000BASE-T-RJ45-SFP-Modul- Supports 1000BASE-T operation in host systems
- Supports TX disable function
- For 100m range over UTP Cat 5e or higher cable
- Hot-pluggable SFP footprint functions
- Business safe operating temperature range: 0-70°C
- Complies with IEEE standard 802.3-2002
- All-metal housing for low electromagnetic interference
- Low power dissipation (0.5 W typical, 0.8 W max.)
Assured compatibility
TL-SM331T is compatible with various fiber devices from different vendors such as TP-Link, Cisco, Huawei, Ubiquiti, D-Link, Netgear and Mikrotik.
Package contents:
- 1000BASE-T RJ45 SFP Module TL-SM331T
- Manual
TP-LINK TPLINK WPA1300PK - Powerline Kit (2 devices)
116.57 EUR
AV1300-AC1200 Gigabit WLAN Powerline KIT with power outlet- 3x RJ45 Gigabit Ethernet ports
- Powerline: up to 1300 Mbps
- Ethernet: 10/100/1000 Mbps
TP-Link OneMesh™ onemesh
TP-Link OneMesh technology easily and flexibly reaches all weak signal areas and wireless holes with a single stable and fast WLAN.
Expand your OneMesh network with OneMesh, whether it's a OneMesh repeater, OneMesh powerline adapter or OneMesh router.
Slow connections, signal interruptions, complicated and cumbersome setup is over.
OneMesh™ - The networking solution for your home.
More stable connection at the same time
2×2 MIMO adds another transmission at the same time and enables the provision of parallel data streams.
So you benefit from significantly higher transmission rates, much more stable connections and twice the resilience.
Greater range
2×2 MIMO technology with beamforming maximizes performance on the individual lines.
This improves range, especially to more distant outlets.
Plug and Play
Plug the TL-PA8010P adapter into the wall outlet and connect it to the router.
Then plug in the TL-WPA8631P WLAN adapter where you need WLAN.
Note: Connect the two adapters by using the pair button.
Package contents:
- 1x TL-WPA8631P
- 1x TL-PA8010P
- 2x network cable
- 1x manual
TP-LINK TPLINK MC220L - 1000Base-SX/LX/LH > 1000Base-T converter
30.98 EUR
Gigabit Ethernet media converter• Complies with standards IEEE 802.3ab and IEEE 802.3z.
• The FX-port supports Hot-Swap
• Fibre-optic transmission distance of up to 0.55 km for the multimode fibre and 10 km for the single mode fibre.
The MC220L is a media converter designed for converting 1000BASE-SX fibre media into 1000Base-TX copper media and vice versa. The MC220L was designed according to the IEEE802.3ab 1000Base-T standard and the IEEE802.3z 1000Base-SX/LX/LH standard and is intended for use with multimode fibre-optic cables and the SC plug. It functions at 850nm for both transmitting and receiving data when using multimode fibre-optics and at 1310nm for both transmitting and receiving data when using a single mode fibre-optic cable.
Other features of this module include: the option of using the device as a stand-alone device (no enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, and status LED on the front. The MC220L transmits in fibre-optic long distance mode via the multimode fibre-optic cable up to a distance of 550 m and via a single mode fibre-optic cable up to a distance of 10 km.
- Standards and protocols: IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
- Basic function: Full duplex flow control IEEE 802.3x
Increases the fibre range to 0.5 km if a 50/125 µm fibre is used
- Ports: 1-Gigabit SFP-port
1000M RJ45 port (auto MDI/MDIX)
- Network media 1000BASE-T: Category 5 UTP cables, 5e (maximum 100 m)
EIA/TIA-568 100Ohm STP (maximum 100 m)
- Network media 1000BASE-FX: Multimode/single mode fibres
-LED display: PWR, LINK, RX
- Dimensions (LxWxH) 94.5 mm*73.0 mm*27.0 mm
Power supply: External voltage adapter
TP-LINK TPLINK RE335 - Wi-Fi Repeater, 1167 Mbps
51.19 EUR
AC1200 Mesh WLAN Repeater- 300 MBit/s (2.4 GHz)
- 867 MBit/s (5 GHz)
- 1x RJ45 Fast Ethernet
- 2x antenna
Boost the WLAN signal wherever you need it
A single router has limited WLAN coverage and always causes WLAN dead zones.
The RE335 wirelessly connects to your existing router and extends its WLAN signal to areas it can't reach on its own.
Enjoy a stable and fast AC1200 network experience wherever you are at home.
- Eliminate weak signal areas with full home WLAN coverage.
- Dual-band 2.4GHz (300 Mbps) and 5GHz (867 Mbps) WLAN connectivity provides a more stable WLAN experience.
- Creates a mesh network by connecting to a TP-Link OneMesh™ router for seamless whole-home coverage.
- Adaptive Path Selection - Automatically connects to the fastest connection path to the router and runs at top speed.
- High Speed Mode - Maximizes speed by using a WiFi band as a dedicated backhaul, ideal for HD streaming and gaming.
- AP Mode - Create a new WiFi access point to add WiFi capabilities to your wired network.
- The intelligent signal indicator helps find the best location for optimal WLAN coverage by displaying signal strength.
- Press the WPS button to easily connect to the router, and you can manage it consistently through the Tether app or web interface.
- Works with any wireless router or wireless access point
Faster dual-band WLAN Up to 1200 Mbps.
The RE335 delivers dual-band (2.4 GHz and 5 GHz) WLAN signal transmission, doubling the performance of single-band.
With dual bands of 2.4 GHz (300 Mbps) and 5 GHz (867 Mbps), you can connect more devices simultaneously.
Use the 2.4 GHz band to send email and surf the web, and the 5 GHz band for gaming and HD streaming.
TP-Link OneMesh ™
OneMesh ™ is an easy way to create a mesh network with a single WLAN name for seamless whole-home coverage.
Simply connect a OneMesh ™ WLAN repeater to a OneMesh ™ router.
No more searching for a stable connection.
- Intelligent roaming
Uninterrupted streaming as you move around your home extender. - One WLAN name
No more changing WLAN network names - Simple creation
OneMesh™ Router + OneMesh™ WLAN Repeater - Unified management
Manage the entire unified network in a single tether app
Adaptive Path Selection: Holds up even at top speed
Adaptive path selection keeps your network running at top speed by automatically selecting the fastest connection path to the router.
Always set up your devices fast and stable, especially ideal for network environments with many devices and applications.
High-speed mode: Maximize speed with dedicated backhaul.
Uses one dedicated WLAN band as a backhaul...
TP-LINK TPLINK TLSM321A2 - Mini GBIC, 1000Base-BX
28.5 EUR
1000Base-BX WDM Bi-Directional SFP Module- Up to 20 km transmission distance with 9/125 µm SMF (Single-Mode Fiber)
- Bidirectional WDM communication on a single fiber
- Compatible with Small Form Pluggable Multi-Source Agreement (SFP-MSA)
- Supports Digital Diagnostic Monitoring (DDM)
- Hot-swappable module design
- Work with TL-SM321B as a pair
What This Product Does
TP-Link´s TL-SM321A adopts the latest standard 1000Base-BX, transmitting over one single-mode fiber with one different wavelength going in each direction.
Paired with TL-SM321B, You can extend the network distance up to 20Km with TP-Link´s routers, switches and media converters for reliable high-speed long-distance communication.
TP-LINK TPLINK SF1005LP - Switch, 5-Port, Fast Ethernet, PoE
51.28 EUR
5-Port 10/100Mbps Desktop Switch with 4-Port PoE- 5× 10/100 Mbps RJ45 ports
- 4× PoE ports transfer data and power on individual cables
- Works with IEEE 802.3af compliant PDs
- Up to 250 m data and power transmitting range under Extend Mode**
- Priority Mode ensures high priority of ports 1-2 to guarantee the quality of sensitive application
- Supports PoE Power up to 41 W for all PoE ports*
- Plug and play with no configuration required
Professional Fast Ethernet Switch with 4 PoE Ports
Plug and Play, with PoE Transmission for Surveillance up to 250 m
Dedicated 4-Port PoE Switch (41 W Budget) for Numerous Applications
Compliance with the 802.3af PoE standard supports up to 15.4 W on each PoE port.
The total 41 W PoE power budget* for the 4× PoE ports opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses.
It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more.
Ideal for IP Surveillance - Up to 250 m Transmissions
With extend mode, the PoE transmission distance reaches up to 250 m** - perfect for IP Camera deployment in large areas.
Priority Video Quality Guaranteed
Quality of sensitive applications like video monitoring in critical business areas is guaranteed by offering higher priority options for ports 1-2 when one-touch Priority Mode is on.
Intelligent Power Management
When total power consumption exceeds 41 W, the intelligent power management will cut the lower priority port power.
This ensures the high priority port’s power supply and protects the device from power overload.
It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged.
Durable Metal Casing
The interior components of TL-SF1005LP are protected by high-quality metal casing to ensure a long product life.
Having passed an array of stringent reliability tests, TL-SF1005LP delivers switching performance you can depend on.
- Compact Desktop Design
- Wall-Mounting
- Fanless Design
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.
TP-LINK TPLINK SF1008LP - Switch, 8-Port, Fast Ethernet, PoE
60.59 EUR
8-Port 10/100Mbps Desktop Switch with 4-Port PoE- 8× 10/100 Mbps RJ45 ports
- 4× PoE ports transfer data and power on individual cables
- Works with IEEE 802.3af compliant PDs
- Up to 250m data and power transmitting range under Extend Mode**
- Priority Mode ensures high priority of ports 1-2 to guarantee the quality of sensitive application
- Supports PoE Power up to 41 W for all PoE ports*
- Plug and play with no configuration required
Professional Fast Ethernet Switch with 4 PoE Ports
Plug and Play, with PoE Transmission for Surveillance up to 250 m
Dedicated 4-Port PoE Switch (41 W Budget) for Numerous Applications
Compliance with the 802.3af PoE standard supports up to 15.4 W on each PoE port.
The total 41 W PoE power budget* for the 4× PoE ports opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses.
It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more.
Ideal for IP Surveillance - Up to 250 m Transmissions
With extend mode, the PoE transmission distance reaches up to 250 m**—perfect for IP Camera deployment in large areas.
Priority Video - Quality Guaranteed
Quality of sensitive applications like video monitoring in critical business areas is guaranteed by offering higher priority options for ports 1-2 when one-touch Priority Mode is on.
Intelligent Power Management
When total power consumption exceeds 41 W, the intelligent power management will cut the lower priority port power.
This ensures the high priority port’s power supply and protects the device from power overload.
It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged.
Durable Metal Casing
The interior components of TL-SF1008LP are protected by high-quality metal casing to ensure a long product life.
Having passed an array of stringent reliability tests, TL-SF1008LP delivers switching performance you can depend on.
- Compact Desktop Design
- Wall-Mounting
- Fanless Design
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.
TP-LINK TPLINK SL1218MP - Switch, 16-Port, Gigabit Ethernet, PoE
175.32 EUR
16-Port 10/100Mbps + 2-Port Gigabit Unmanaged PoE Switch TL-SL1218MP- 16 PoE+ 10/100Mbps RJ45 ports, 2 Gigabit RJ45 ports and 2 combo Gigabit SFP slots
- Up to 250m data and power transmission under extend mode specially designed for surveillance system
- Priority mode for port1-8 to guarantees the quality of sensitive applications like video monitor
- High PoE power budget with up to 30W for each PoE port and 192W for all PoE ports
- Easy to use, with no configuration and installation needed
High PoE Power Budget
TL-SL1218MP complies with the 802.3af/at PoE+ standard, supporting up to 30W power supply on each PoE port. The total high PoE power budget of up to 192W for the 16 PoE ports, making it ideal for small to medium business surveillance systems.
Up to 250m Transmission for Surveillance
TL-SL1218MP is a special designed PoE switch for IP surveillance applications. PoE switch makes surveillance installation simpler, safer and less expensive. With the extend mode, the PoE transmission distance reaches up to 250m which makes it perfect for IP Camera deployment in large area coverage.
Video Quality Guaranteed
To guarantee the quality of sensitive applications like video monitor, TL-SL1218MP offers higher priority options for those IPC connected ports.
TP-LINK TPLINK TLSG1008M - Switch, 8-Port, Gigabit Ethernet, PoE
133.97 EUR
8-Port Gigabit Desktop/Rackmount Switch with 8-Port PoE+ TL-SG1008MP- 8 10/100/1000Mbps RJ45 ports
- Equipped with 8 PoE+ supported ports to transfer data and power over a single cable
- Works with IEEE 802.3af/at compliant devices, expanding home and office networks
- Innovative energy-efficient technology reduces power consumption by up to 75%
- Supports PoE+ standard with total power budget of 126W and up to 30W per port
- Plug and play design, no configuration required
The TL-SG1008MP is an 8-Port Gigabit Desktop/Rack mountable Switch with all 8 ports supporting the PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable. With a total power budget of 126W, up to 30W per port, TL-SG1008MP can power more high-powered devices such as wireless Access Points (APs), IP Cameras or IP Phones. Moreover, with innovative energy-efficient technology, the TL-SG1008MP can save up to 75% of the power consumption, making it an eco-friendly solution for your business network.
How This Product Works
All 8 ports of TL-SG1008MP support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). In this situation, the electrical power is transmitted along with data in a single cable, allowing you to expand your network where there are no electrical cables or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones.
TP-LINK TPLINK SG1005LP - Switch, 5-Port, Gigabit Ethernet, PoE+
44.52 EUR
5-Port Gigabit Desktop Switch with 4-Port PoE+- 5× 10/100/1000 Mbps RJ45 ports
- With four PoE+ ports, transfers data and power on one single cable
- Works with IEEE 802.3af/at compliant PDs
- 802.1p/DSCP QoS enable smooth latency-sensitive traffic
- Supports PoE Power up to 30 W for each PoE port
- Supports PoE Power up to 40 W for all PoE ports*
- Plug and play, no configuration and installation required
Professional 5-Port Gigabit Switch with 4 PoE+ Ports
Plug and Play, with PoE power supply which meets the needs of diverse devices.
Dedicated 4-Port PoE+ Switch (40 W Budget) for Numerous Applications
Compliance with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port.
The total 40 W PoE power budget* for the 4× PoE ports opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses.
It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more.
Intelligent Power Management
When total power consumption exceeds 40 W, the intelligent power management will cut the lower priority port power.
This ensures the high priority port’s power supply and protects the device from power overload.
It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged.
Advanced Functions for Higher Performance
- Qos For Fluent Online Experience
Administrators can designate the priority of traffic based on QoS, for example, to ensure that voice and video applications remain clear and lag-free. - IGMP Snooping - Traffic Optimization for IPTV
IGMP Snooping optimizes multimedia traffic delivery, to ensure a better network experience especially for applications like IPTV.
Durable Metal Casing
The interior components of TL-SG1005LP are protected by high-quality metal casing to ensure a long product life.
Having passed an array of stringent reliability tests, TL-SG1005LP delivers switching performance you can depend on.
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
TP-LINK TPLINK SG1016PE - Switch, 16-Port, Gigabit Ethernet, PoE
190.57 EUR
16-Port Gigabit Easy Smart PoE Switch with 8-Port PoE+ TL-SG1016PE- 16 10/100/1000Mbps RJ45 ports
- Equipped with 8 PoE+ supported ports to transfer data and power over a single cable
- With a total PoE power budget of 110W, up to 30W per port
- Works with IEEE 802.3af/at compliant devices, expanding home and office networks
- Simple network set-up on top of plug-and-play connectivity
- Web-based user interface and management utility simplify configuration
The TL-SG1016PE is an 16-Port Gigabit Desktop/Rack mountable Switch with 8 ports supporting the PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable. With a total power budget of 110W, up to 30W per port, TL-SG1016PE can power more high-powered devices such as wireless Access Points (APs), IP Cameras or IP Phones. Moreover, with innovative energy-efficient technology, the TL-SG1016PE can save up to 75% of the power consumption, making it an eco-friendly solution for your business network.
How This Product Works
8 ports of TL-SG1016PE support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). In this situation, the electrical power is transmitted along with data in a single cable, allowing you to expand your network where there are electrical cables or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones.
TP-LINK TPLINK TLSF1005P - Switch, 5-Port, Fast Ethernet, PoE
53.31 EUR
5-Port 10/100Mbps Desktop Switch with 4-Port PoE TL-SF1005P- 5 10/100Mbps RJ45 ports
- With four PoE ports, transfers data and power on one single cable
- Working with IEEE 802.3af compliant PDs, expands home and office network
- Supports PoE Power up to 15.4W for each PoE port
- Supports PoE Power up to 58W for all PoE ports
- Requires no configuration and installation
Power over Ethernet
4 of the 5 Auto-Negotiation RJ45 ports (Port 1 to Port 4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs).
Intelligent Power Management
When total power consumption excels 58W, the intelligent power management will cut the lower priority port power off to ensure the high priority port’s power supply and protect the device from power overload operation.
Sturdy Metal Casing
Sturdy, compact metal casing and shielded RJ45 ports, with desktop/wall-mounting design, to meet your needs in any environment. Besides, fanless design ensures quiet operation.
TP-LINK TPLINK TLSG1005P - Switch, 5-Port, Gigabit Ethernet, PoE
44.05 EUR
5-Port Gigabit Desktop Switch with 4-Port PoE TL-SG1005P- 5 10/100/1000Mbps RJ45 ports
- With four PoE ports, transfers data and power on one single cable
- Working with IEEE 802.3af compliant PDs, expands home and office network
- 802.1p/DSCP QoS enable smooth latency-sensitive traffic
- Supports PoE Power up to 15.4W for each PoE port
- Supports PoE Power up to 56W for all PoE ports
- Requires no configuration and installation
Power over Ethernet
4 of the 5 Auto-Negotiation RJ45 ports (Port 1 to Port 4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs).
Intelligent Power Management
When total power consumption excels 56W, the intelligent power management will cut the lower priority port power off to ensure the high priority port’s power supply and protect the device from power overload operation.
Sturdy Metal Casing
Sturdy, compact metal casing and shielded RJ45 ports, with desktop/wall-mounting design, to meet your needs in any environment. Besides, fanless design ensures quiet operation.
TP-LINK TPLINK TLSF1008P - 8-port Fast Ethernet desktop (4xPoE) switch
61.62 EUR
8-port 10/100 M desktop PoE switch• Four PoE ports that can transmit data and power via a single cable
• Works with IEEE802.3af-compliant PDs, enlarges the home and office network
• Requires no configuration
Product functionality
The TL-SF1008P 8-port 10/100 desktop switch allows for a seamless network connection. It combines a 100-Mbps Fast Ethernet with 10-Mbps Ethernet network capabilities.
How this product works
4 of the 8 auto-coordination RJ45 ports (port 1 to port 4) of the switch support the power-over-Ethernet (PoE) function. These PoE ports can recognise PoE devices automatically and supply IEEE802.3af-powered devices (PDs). In this situation the electrical power is transported together with the data in a single cable. The device makes it possible to expand your network where there are no power lines or outlets and where you would like to operate devices such as access points, IP cameras or IP phones, etc.
Behaviour in case of overloading
The TL-SF1008P has a priority* function which helps protect the system if the system performance is overloaded. If the entire power consumption of the PoE PDs is greater than or equal to 53 W, priorities are assigned under the PoE ports. The system then decides on the power distribution and the energy supply on the port with the lowest priority is switched off.
Port-priority function
*Priority (port 1> port 2> port 3> port 4): This function is there to protect the system if the PoE performance is overloaded. If, for example, ports 1, 2 and 4 each use 15.4 W (maximum power per port 15.4 W), the total power is 46.2 W (in this case, the PoE max LED is red). If an additional PD with 10 W is connected to port 3, the system port 4 will be switched off to prevent damage. This means that ports 1 and 2 can each consume 15.4 W, while port 3 can consume 10 W. No power is delivered on port 4.
Easy to operate
The TL-SF1008P is easy to install and use. It does not require any configuration. With its desktop design, outstanding performance and quality, the TP-LINK TL-SF1008P 8-port 10/100 desktop PoE switch is an excellent choice for expanding your home or office network.
TP-LINK TPLINK SG1008P - 8-port Gigabit desktop switch with 4 PoE ports
63.69 EUR
• Eight 10/100/1000 Mbps RJ45 ports• Four PoE ports for transmitting data and current with a single cable
• Works with IEEE802.3af-compliant PDs, expands your home or office network
• No configuration required
The TL-SG1008P 8-port Gigabit desktop switch provides a seamless network connection. It combines fast Ethernet with Gigabit Ethernet network capabilities.
How this product functions
4 of the 8 auto-tuning RJ45 ports (ports 1 to 4) on the switch support Power over Ethernet (PoE). These PoE ports are able to automatically detect PoE devices and supply IEEE802.3af Powered Devices (PDs). In this situation, the electric current is transported together with the data in a single cable. The device makes it possible to expand your network where there are no power lines or outlets and where you would like to operate devices such as access points, IP cameras or IP phones, etc.
Response to overload
The TL-SG1008P has a priority* function that helps protect the system when the system power is exceeded. If the total power consumption of the PoE PDs is greater than or equal to 53W, priorities are assigned among the PoE ports. The system then decides on the power distribution and shuts off the power supply at the port with the lowest priority.
Port priority function
*Priority (Port 1 > Port 2 > Port 3 > Port 4): This function is provided to protect the system if the PoE power is exceeded. If, for example, ports 1, 2 and 4 each use 15.4W (maximum power per port is 15.4 W), the total power is 46.2W (the PoE max LED is then red). If an additional PD with 10W is connected to port 3, the system shuts off port 4 to prevent the device becoming damaged. This means that 15.4 W can be consumed at port 1 and port 2, and 10 W at port 3. No power is output at port 4.
Simple handling
The TL-SG1008P is easy to install and use. No configuration at all required. The desktop design, excellent performance and quality make the TP LINK 8-port Gigabit desktop PoE switch TL-SG1008P the ideal choice for expanding your home or office network.
TP-LINK TPLINK TLSG105PE - Switch, 5-Port, Gigabit Ethernet, PoE
75.38 EUR
5-Port Gigabit Easy Smart Switch with 4-Port PoE+- Five 10/100/1000Mbps RJ45 ports
- Equipped with four 802.3af/at PoE+ ports with up to 30W for each port, data, and power can be transferred on one single cable
- Supports PoE power up to 65 W for all PoE ports*
- Provides network monitoring, traffic prioritization, VLAN features, and PoE Auto Recovery
- Simple network set-up on top of plug-and-play connectivity
- Web-based user interface and Easy Smart Configuration Utility simplify configuration
- Fanless design lowers energy consumption and eliminates operating noise
Easy to Use, Multi-Purpose PoE Switch with Powerful Performance
- 65W PoE Budget*
- Gigabit Ports
- Easy to Use
- VLAN
- QoS for Traffic Prioritization
- Intelligent Management
- PoE Auto Recovery
Multiple Application Scenarios
The TL-SG105PE is fully compatible with PoE devices, such as IP cameras, access points, and IP phones.
It also works with non-PoE wired devices, such as PCs, printers, and IPTV.
Surveillance
Works with IP Cameras
Conference Call
Works with IP Phones
Wi-Fi Coverage
Works with Omada EAPs
Wired Connections
Works with PCs and Printers
Dedicated 4 PoE+ Ports (65 W Budget) for Numerous Applications
Compliance with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port.
The total 65 W PoE power budget* for the 4× gigabit PoE+ ports makes it has wide range of applications, such as surveillance, offices, dormitories, and small businesses.
It is fully compatible with IP cameras, access points, IP phones, computers, printers, and etc.
Making Management Easy
TL-SG105PE offers network monitoring for users to observe traffic behavior.
Through its web-based user interface and management utility, the TL-SG105PE offers a variety of useful features, including network monitoring, traffic prioritization, and enhanced QoS.
Multiple Features Guarantee Stable Operation
- System Self-Healing with PoE Auto Recovery
The switch automatically detects and reboots the PD devices, such as cameras and APs, when they fall offline or go unresponsive, guaranteeing the stable operation of PoE-connected devices, without need for manual monitoring and restart. - Intelligent Power Management to Prevent Power Overload
Automatically cuts lower priority ports’ power to ensure high-priority ports’ power supply when the total PoE power consumption exceeds 65 W.
This protects the device from power overload operation. - Great Compatibility with PD Detection
Automatically detects the required PoE power for your device and protects your non-PoE equipment...
TP-LINK TPLINK TLSM321B2 - Mini GBIC, 1000Base-BX
25.4 EUR
1000Base-BX WDM Bi-Directional SFP Module- Designed for on-site gigabit fiber communication
- Up to 2 km transmission distance with 9/125 µm SMF (Single-Mode Fiber)
- Bidirectional WDM communication on a single fiber
- Compatible with Small Form Pluggable Multi-Source Agreement (SFP-MSA)
- Supports Digital Diagnostic Monitoring (DDM)
- Hot-swappable module design
- Work with TL-SM321A-2 as a pair
What This Product Does
TP-LINK´s TL-SM321B-2 and TL-SM321A-2 is designed to work in a pair to create an on-site gigabit fiber communication up to 2km (2,000 meters).
With one single-mode fiber, the pair of modules can create a full-duplex gigabit path between your switches, storage devices, and server.
The TP-LINK´s TL-SM321B-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA).
As a WDM Bi-Directional optical transceiver, TL-SM321B-2 uses an integrated LC Bi-Directional optical interface connector and the data link is up to 2 km in 9/125 µm SMF (Single-Mode Fiber).
Also, TL-SM321B-2 incorporates the Digital Diagnostic Monitoring (DDM) feature which is compatible with SFF-8472.
DDM supports real-time monitoring of the transceiver, and shows parameters including the transceiver current which transmits/receives optical power and operating temperature.
TP-Link's TL-SM321B-2 is used for short-and medium distance fiber network in practice, and it provides fast and stable gigabit fiber connection for switches, routers, servers, etc.
TP-LINK TPLINK TLSL1226P - Switch, 26-port, Fast Ethernet, RJ45/SFP, PoE+
298.43 EUR
TP-Link TL-SL1200 Rackmount Switch, 24x RJ-45, 2x RJ-45/SFP, 250W PoE+- 24x RJ45 Fast Ethernet PoE+
- 2x RJ45/SFP (10/100/1000)
- 250 W PoE total power budget
- 2x fan
Dedicated 24-port PoE + switch for a wide range of applications with a PoE budget of 250W
Compliance with 802.3af / at PoE + standard supports up to 30 W on each PoE port.
The total PoE power budget of 250 W for the 24x PoE ports provides a wide range of applications, such as surveillance, offices, dorms and small businesses.
It is fully compatible with IP cameras, access points, IP phones, computers, printers, etc.
Scope of delivery:
- TL-SL1226P
- Power cable
- Installation guide
- Mounting material
TP-LINK TPLINK UH700 - 7-port USB 3.0 hub including power supply unit
51.14 EUR
• The USB 3.0 ports offer speeds up to 5 Gbps, 10 times as fast as USB 2.0• Having 7 slots saves you having to constantly disconnect and reconnect your USB devices
The USB hub UH700 is ideal for adding additional USB ports to your computer. This allows you to connect up to 7 devices, such as USB data carriers, USB mice or USB printers at the same time, without having to constantly disconnect and reconnect your devices. The USB 3.0 ports support data transfer rates of up to 5 Gbps and are thus 10 times as fast as USB 2.0.
Fast data transfers
Thanks to its USB 3.0 ports, the UH700 is 10 times as fast as USB 2.0.
Expansion of your USB ports
The UH700 offers you 7 additional USB ports so that you do not have to constantly connect and disconnect the USB devices on your PC.
Secure and reliable
The UH700 has multiple support mechanisms to prevent damage to your connected devices.
TP-LINK TPLINK LS1005 - Switch, 5-Port, Fast Ethernet
23.34 EUR
5-Port 10/100Mbps Desktop Switch - 5× 10/100Mbos Auto-Negotiation RJ45 ports, supporting Auto-MDI/MDIX
- Green Ethernet technology saves power consumption
- IEEE 802.3X flow control provides reliable data transfer
- Plastic casing and desktop design
- Plug and play, no configuration required
- Fanless design ensures quiet operation
Easily Expand Your Network and Save Energy
5-Port 10/100 Mbps Desktop Switch
Let LiteWave Bring You Lighter Network Life
The TP-Link LiteWave Series Unmanaged Switches provide easy and affordable way to expand your wired network. They are easy to use and reliable. With these plug-and-play switches, you can expand your network connections to multiple devices instantly. With all ports support Auto-MDI/MDIX, there’s no need to worry about the type of cable to use.
Plug and Play
- Connect to Power
- Connect The Devices
- Enjoy
Go Green with Your Ethernet
The LiteWave Series also supports energy-efficient technology, helping you save power and money. Power consumption automatically adjusts according to link status and cable length, allowing you to expand your network while minimizing your carbon footprint. Save the planet and lower your energy bills - it’s a win-win!
Fanless and Desktop Design
Compact desktop design, to meet your needs in any environment.
Besides, fanless design ensures quiet operation.
Use Where You Need, However You Need
The LS1005 is fully compatible with networked devices such as computers, printers, webcams, IPTVs. It has a wide range of application scenarios and is suitable for networking in school dormitories, surveillance, homes, and small businesses.