THRONMAX NEWM9 - Microphone, Fireball, 48 kHz/16 bit
40.91 EUR
Access the complete sheet with information, compare prices and identify the features of PRODUCTNAME, available at the price of PRICE CURRENCY; it inserts into the CATEGORY NAME; the product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
With Thronmax Fireball, quick and easy recording is finally a reality. Simply mount Fireball on the included sticky pad stand, plug the USB cable into your Mac or PC and that’s it. You’re ready to sit back and start recording crystal-clear audio for any recording or live streaming.
EAN: 4052792062618
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
- 14 mm condenser capsule offers crystal clear audio for Skype, Youtube and others
- Record vocals create podcasts, and add narration to your home movies
- Sampling rate: 48 kHz, 16 bit recording
- Plug-and-play – no driver installation needed
- USB 2.0 device (USB 3.0 compatible as per USB 3.0 backward compatibility specification)
- Fast and easy recording
- Compatible with Windows 10, Windows 8 (including 8.1), Windows 7, Windows Vista, Windows XP (Home and Professional), and Mac OS X (10.4.11 or higher), and requires a minimum of 64 MB of RAM
- Cable length: 1.8 m
- Color: Black
With Thronmax Fireball, quick and easy recording is finally a reality. Simply mount Fireball on the included sticky pad stand, plug the USB cable into your Mac or PC and that’s it. You’re ready to sit back and start recording crystal-clear audio for any recording or live streaming.
EAN: 4052792062618
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
THRONMAX M2G - Microphone, MDrill One, 48 kHz, grey
87.42 EUR
The MDrill One not only stands out thanks to its appearance, it also has a lot of technical features on offer. Whether for streamers, gamers or musicians, the M2 with its 3 capacitor capsules and 4 recording patterns offers everything to ensure that your recordings get a particularly clear and full sound. For easy and uncomplicated handling, the MDrill One has buttons muting the microphone and adjusting the directivity, as well as volume and gain control.- HD, studio-quality recordings.
- Supports MAC, WINX, PS4 and Linux
- Patented Vertigain technology. Recorded sounds are up to 10% clearer than with conventional microphones
- Sample rate: 48 kHz, 16 bit recording
- Frequency: 20 Hz - 20 kHz
- 4 directivity characteristics: kidney-shaped (for streaming, gamers and instruments), stereo (singing), bidirectional (interviews or duets), 360° omnidirectional (e.g. conference calls)
- Port 1: 3.5 mm aux-in
- Port 2: USB-C (including 3 m braided USB-C cable)
- 3x 16 mm capacitor capsules
- RGB LED indicator light with 7 colour modes
- Mute button
- With universal thread for microphone shock mounts, microphone stands, tripods etc.
- Perfect for YouTubers and gamers or conference calls
THRONMAX M4 - Microphone, MDrill Zero, 48 kHz, black
66.75 EUR
The MDrill Zero not only stands out thanks to its appearance, it also has a lot of technical features on offer. Whether for streamers, gamers or musicians, the M4 with its 2 capacitor capsules and 2 recording patterns offers everything to ensure that your recordings get a particularly clear and full sound. For easy and uncomplicated handling, the MDrill Zero has a knob for volume and directivity characteristics and can be mounted on almost all standard microphone stands thanks to its microphone holder with universal thread.- HD, studio-quality recordings.
- Patented Vertigain technology. Recorded sounds are up to 10% clearer than with conventional microphones
- Colour: black
- Sample rate: 48 kHz, 16 bit recording
- Frequency: 20 Hz - 20 kHz
- 2 directivity characteristics: kidney-shaped (for streaming and for gamers), 360° omnidirectional (conference calls and events)
- Port 1: 3.5 mm aux-in
- Port 2: USB-C (including 2m braided USB-C cable)
- 2x capacitor capsules (16 mm and 10 mm)
- RGB LED indicator light for mode display
- Mute button
- With universal thread for microphone shock mounts, microphone stands, tripods etc.
- Perfect for YouTubers, broadcasters and gamers
TERRATEC 324195 - Sound card, external, surround sound, 5.1, 16-bit 48 kHz
30.51 EUR
The TERRATEC AUREON 5.1 USB sound card provides an SNR of 80 dBand a frequency range between 15 Hz and 25 kHz for the best
sound quality from your PC.
Thanks to the two stereo outputs, two devices can be connected at the same time.
werden. The volume is adjusted directly on the sound card while the 10-cm
USB 2.0 cable ensures maximum compatibility.
Features
- Maximum compatibility thanks to 10-cm USB 2.0 cable
- Volume control on the sound card
- Two stereo audio outputs for connecting two devices at the same time
- Microphone input
- SNR 80 dB, frequency range 15 Hz - 25 kHz
- Sound chipset: Generalplus GPD8104
- Driverless compatibility with Windows, Mac OS and Linux
Included in delivery
- TERRATEC AUREON 5.1 USB sound card
- Quick-start guide
- Service card
THRONMAX M8 - Microphone, MDrill Pulse, 96 kHz
56.41 EUR
Developed and tested by streamers/YouTubers, the Thronmax MDrill Pulse is the last missing part of your gaming/streaming setup! Enjoy the best microphone technology and experience a rich, powerful sound. The MDrill Pulse is well suited for podcasts, vocals or game streaming due to its kidney directivity, which records sound sources directly in front of the microphone. Sit on your computer and let your creativity run wild with Twitch streams, podcasts, voice-overs, interviews, Skype/VoIP calls and music recordings- HD, studio-quality recordings.
- Sample rate: 96 kHz, 24 bit recording
- Frequency: 20 Hz - 20 kHz
- 1 directivity characteristic: kidney-shaped
- Port 1: 3.5 mm aux-in
- Port 2: USB-C (including 2m braided USB-C cable)
- 2x capacitor capsules (16 mm and 6 mm)
- RGB LED as mode indicator
- Includes volume control, mute button and 360° stand
- Active noise reduction reduces background noise and ensures clear, clean sound
THRONMAX M20KIT - Microphone, USB Streaming Kit
77.08 EUR
- Streaming kit contains: RGB microphone, spring boom arm and desk clamp, 5/8'' & 3/8'' thread, tripod adapter, M20 sponge, pop filter, braided USB cable
- Condenser microphone (cardioid mic)
- Professional sound chipset 96 kHz/24 bit, high-resolution sampling rate
- USB 2.0 data port (USB-C)
- USB cable double shielded, reduces interference
- Suitable for gaming recordings, PC karaoke, video calls, podcasts, live streaming, etc.
- Cable length: 2 m
- 24 modes RGB-LED
With this kit you are perfectly equipped for gaming recordings, PC karaoke, video calls, etc. This condenser microphone was developed with a professional sound chipset that allows a high resolution sampling rate. It has an USB 2.0 port (USB-C) which can be easily connected to your computer or Mac OS. With the pop filter and foam windscreen, the condenser microphone records your voice crystal clear and thanks to the shock mount the microphone lies firmly and protected in the boom arm.
DELOCK 66882 - Professional USB Condenser Microphone 24 Bit / 192 kHz
46.08 EUR
This professional USB condenser microphone by Delock can be used for high-quality voice and vocal recording, making it suitable for streaming, podcasting, gaming and video meetings.Optimal recordings
The microphone has a 16 mm c
WOKIN 222308 - Socket bit set, 5/16 ''x 48 mm, 1/4''
11.91 EUR
Socket bit set, 3 pieces, 5/16 ''x 48 mm, 1/4''
The socket bit set from WOKIN made of high-quality chrome vanadium steel consists of three magnetic socket bit holders that serve as an attachment for the cordless screwdriver.
Features:
- magnetic
- made of high-quality, durable chrome-vanadium steel
- 1/4 ''quick release hex bits
- Diameter: 5/16 ''mm
- Length: 48mm
TEXAS INSTRUMENTS PCA 9538 D - 8-bit I2C/SMBus I/O extension, 400 kHz, 2.3 - 5.5V, SO-16
13.31 EUR
PCA9538 Remote 8-Bit I2C AND SMBus Low-power I/O Expander With Interrupt Output, Reset, and Configuration RegistersDescription
This 8-bit I/O expander for the two-line bidirectional bus (I2C) is designed for 2.3-V to 5.5-V VCC operation. It provides general-purpose remote I/O expansion for most microcontroller families via the I2C interface [serial clock (SCL), serial data (SDA)].
The PCA9538 consists of one 8-bit Configuration (input or output selection), Input Port, Output Port, and Polarity Inversion (active high or active low) registers. At power on, the I/Os are configured as inputs. However, the system master can enable the I/Os as either inputs or outputs by writing to the I/O configuration bits. The data for each input or output is kept in the corresponding Input Port or Output Port register. The polarity of the Input Port register can be inverted with the Polarity Inversion register. All registers can be read by the system master. The system master can reset the PCA9538 in the event of a timeout or other improper operation by asserting a low in the RESET input. The power-on reset puts the registers in their default state and initializes the I2C/SMBus state machine. The RESET pin causes the same reset/initialization to occur without powering down the part. The PCA9538 open-drain interrupt (INT) output is activated when any input state differs from its corresponding Input Port register state and is used to indicate to the system master that an input state has changed. INT can be connected to the interrupt input of a microcontroller. By sending an interrupt signal on this line, the remote I/O can inform the microcontroller if there is incoming data on its ports without having to communicate via the I2C bus. Thus, the PCA9538 can remain a simple slave device. The device outputs (latched) have high-current drive capability for directly driving LEDs. It has low current consumption. Two hardware pins (A0 and A1) are used to program and vary the fixed I2C address and allow up to four devices to share the same I2C bus or SMBus.
Features
• Low Standby Current Consumption of 1 µA Max
• I2C to Parallel Port Expander
• Open-Drain Active-Low Interrupt Output
• Active-Low Reset Input
• Operating Power-Supply Voltage Range of 2.3 V to 5.5 V
• 5-V Tolerant I/O Ports
• 400-kHz Fast I2C Bus
• Two Hardware Address Pins Allow up to Four Devices on the I2C/SMBus
• Input/Output Configuration Register
• Polarity Inversion Register
• Power-Up With All Channels Configured as Inputs
• No Glitch on Power Up
• Noise Filter on SCL/SDA Inputs
• Latched Outputs With High-Current Drive Maximum Capability for Directly Driving LEDs
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)
NXP PCA 9555 D - 16-bit I2C + SMBus I/O port, 400 kHz, SO-24
13.62 EUR
PCA9555 D16-bit I2C-bus and SMBus I/O port with interrupt, SO-24
Description
PCA9555D,112 is a 16-bit CMOS I²C bus and SMBus I/O port with interrupt that provides a 16-bit GPIO extension for I²C bus/SMBus applications and is designed to complement the semiconductor family of I²C bus I/O extensions.
Improvements include higher driver performance, 5V I/O tolerance, lower supply current, custom I/O configuration, and a more compact package.
I/O expansions provide a simple solution in applications where additional I/O is required for ACPI circuit breakers, sensors, push buttons, LEDs, fans, etc. The open-drain interrupt output of the PCA9555 is activated when the state of an input differs from the state of the corresponding input port register and is used to notify the system master that an input state has changed. The power-up reset resets the registers to their default values and activates the state machine.
Features:
- Operating power supply voltage range of 2.3 V to 5.5 V
- 5 V tolerant I/Os
- Polarity Inversion register
- Active LOW interrupt output
- Low standby current
- Noise filter on SCL/SDA inputs
- No glitch on power-up
- Internal power-on reset
- 16 I/O pins which default to 16 inputs
- 0 Hz to 400 kHz clock frequency
TEXAS INSTRUMENTS MSP430F5510IRGZ - MSP430 microcontroller, 16-bit, 1.8 V, 32 KB, 25MHz, VQFN-48
15.11 EUR
DescriptionThe TI MSP family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 5 µs.
The MSP430F5510, MSP430F5509, and MSP430F5508 devices are microcontroller configurations with integrated USB and PHY supporting USB 2.0, four 16-bit timers, a high-performance 10-bit ADC, two USCIs (1), a hardware multiplier, DMA, an RTC module with alarm capabilities, and 31 or 47 I/O pins.
Features
• Low Supply-Voltage Range:
• 3.6 V Down to 1.8 V
• Ultra-Low Power Consumption
- Active Mode (AM)
- All System Clocks Active
195 µA/MHz at 8 MHz, 3 V, Flash Program Execution (Typical)
115 µA/MHz at 8 MHz, 3 V, RAM Program Execution (Typical)
- Standby Mode (LPM3)
Real-Time Clock (RTC) With Crystal, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wakeup:
1.9 µA at 2.2 V, 2.1 µA at 3 V (Typical)
Low-Power Oscillator (VLO), General-Purpose Counter, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wakeup:
1.4 µA at 3 V (Typical)
- Off Mode (LPM4)
- Full RAM Retention, Supply Supervisor Operational, Fast Wakeup:
1.1 µA at 3 V (Typical)
- Shutdown Mode (LPM4.5)
0.18 µA at 3 V (Typical)
• Wake up From Standby in Less Than 5 µs
• 16-Bit RISC Architecture, Extended Memory, up to 25-MHz System Clock
• Flexible Power-Management System
- Fully Integrated LDO With Programmable Regulated Core Supply Voltage
- Supply Voltage Supervision, Monitoring, and Brownout
• Unified Clock System
- FLL Control Loop for Frequency Stabilization
- Low-Power Low-Frequency Internal Clock Source (VLO)
- Low-Frequency Trimmed Internal Reference Source (REFO)
- 32-kHz Watch Crystals (XT1)
- High-Frequency Crystals up to 32 MHz (XT2)
• 16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers
• 16-Bit Timer TA1, Timer_A With Three Capture/Compare Registers
• 16-Bit Timer TA2, Timer_A With Three Capture/Compare Registers
• 16-Bit Timer TB0, Timer_B With Seven Capture/Compare Shadow Registers
• Two Universal Serial Communication Interfaces (USCIs)
- USCI_A0 and USCI_A1 Each Support:
Enhanced UART With Automatic Baud-Rate Detection
IrDA Encoder and Decoder
Synchronous SPI
- USCI_B0 and USCI_B1 Each Support:
I2C
Synchronous SPI
• Full-Speed Universal Serial Bus (USB)
- Integrated USB-PHY
...
TEXAS INSTRUMENTS MSP430F4250IDL - MSP430 microcontroller, 16-bit, 1.8 V, 16 KB, 8MHz, TSSOP-48
17.39 EUR
DescriptionThe Texas Instruments MSP430 family of ultralow-power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6 µs.
The MSP430F42x0 is a microcontroller configuration with a 16-bit timer, a high performance 16-bit sigma-delta A/D converter, 12-bit D/A converter, 32 I/O pins, and a liquid crystal display driver.
Typical applications for this device include analog and digital sensor systems, digital motor control, remote controls, thermostats, digital timers, hand-held meters, etc.
Features
• Low Supply-Voltage Range, 1.8 V to 3.6 V
• Ultralow-Power Consumption:
- Active Mode: 250 µA at 1 MHz, 2.2 V
- Standby Mode: 1.1 µA
- Off Mode (RAM Retention): 0.1 µA
• Five Power Saving Modes
• Wake-Up From Standby Mode in less than 6 µs
• 16-Bit RISC Architecture, 125-ns Instruction Cycle Time
• 16-Bit Sigma-Delta A/D Converter With Internal Reference and Five Differential Analog Inputs
• 12-Bit D/A Converter
• 16-Bit Timer_A With Three Capture/Compare Registers
• Brownout Detector
• Bootstrap Loader
• Serial Onboard Programming, No External Programming Voltage Needed Programmable Code Protection by Security Fuse
•Integrated LCD Driver with Contrast Control for Up to 56 Segments
TEXAS INSTRUMENTS MSP430F5310IPT - MSP430 microcontroller, 16-bit, 1.8 V, 32 KB, 25MHz, LQFP-48
13.21 EUR
DescriptionThe TI MSP family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 5 µs.
The MSP430F5310, MSP430F5309, and MSP430F5308 devices are microcontroller configurations with a 3.3-V LDO, four 16-bit timers, a high-performance 10-bit ADC, two USCIs (1), a hardware multiplier, DMA, an RTC module with alarm capabilities, and 31 or 47 I/O pins.
Features
• Low Supply-Voltage Range: 3.6 V Down to 1.8 V
• Ultra-Low Power Consumption
- Active Mode (AM)
- All System Clocks Active
195 µA/MHz (Typical) at 8 MHz, 3 V, Flash Program Execution
115 µA/MHz (Typical) at 8 MHz, 3 V, RAM Program Execution
- Standby Mode (LPM3)
Real-Time Clock (RTC) With Crystal, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wakeup:
1.9 µA (Typical) at 2.2 V,
2.1 µA (Typical) at 3 V
- Low-Power Oscillator (VLO), General-Purpose Counter, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wakeup:
1.4 µA (Typical) at 3 V
- Off Mode (LPM4)
Full RAM Retention, Supply Supervisor Operational, Fast Wakeup:
1.1 µA at 3 V (Typical)
- Shutdown Mode (LPM4.5)
0.18 µA at 3 V (Typical)
• Wake up From Standby Mode in Less Than 5 µs
• 16-Bit RISC Architecture, Extended Memory, up to 25-MHz System Clock
• Flexible Power-Management System
- Fully Integrated LDO With Programmable Regulated Core Supply Voltage
- Supply Voltage Supervision, Monitoring, and Brownout
• Unified Clock System (UCS)
- FLL Control Loop for Frequency Stabilization
- Low-Power Low-Frequency Internal Clock Source (VLO)
- Low-Frequency Trimmed Internal Reference Source (REFO)
- 32-kHz Watch Crystals (XT1)
- High-Frequency Crystals up to 32 MHz (XT2)
• 16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers
• 16-Bit Timer TA1, Timer_A With Three Capture/Compare Registers
• 16-Bit Timer TA2, Timer_A With Three Capture/Compare Registers
• 16-Bit Timer TB0, Timer_B With Seven Capture/Compare Shadow Registers
• Two Universal Serial Communication Interfaces (USCIs)
- USCI_A0 and USCI_A1
- Enhanced UART Supports Automatic Baud-Rate Detection
- IrDA Encoder and Decoder
- Synchronous SPI
- USCI_B0 and USCI_B1
- I2C
- Synchronous SPI
• Integrated 3.3-V Power System
• 10-Bit Analog-to-Digital Converter (ADC) With Window Comparator
TEXAS INSTRUMENTS MSP430F148IPM - MSP430 microcontroller, 16-bit, 1.8 V, 48 KB, 8MHz, LQFP-64
20.28 EUR
DescriptionThe Texas Instruments MSP430™ family of ultra-low-power microcontrollers (MCUs) consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that attribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6 µs.
The MSP430F13x, MSP430F14x, and MSP430F14x1 MCUs support two built-in 16-bit timers, a fast 12-bit ADC on the MSP430F13x and the MSP430F14x devices, one USART on the MSP430F13x devices or two USARTs on the MSP430F14x and MSP430F14x1 devices, and 48 I/O pins. The hardware multiplier enhances the performance and offers a broad code and hardware-compatible family solution.
Features
• Low Supply Voltage Range, 1.8 V to 3.6 V
• Ultra-Low Power Consumption:
-Active Mode: 280 µA at 1 MHz, 2.2 V
-Standby Mode: 1.6 µA
-Off Mode (RAM Retention): 0.1 µA
• Five Power-Saving Modes
• Wakeup From Standby Mode in Less Than 6 µs
• 16-Bit RISC Architecture, 125-ns Instruction Cycle Time
• 12-Bit Analog-to-Digital Converter (ADC) With Internal Reference, Sample-and-Hold, and Autoscan Feature
• 16-Bit Timer_B With Seven Capture/Compare-With-Shadow Registers
• 16-Bit Timer_A With Three Capture/Compare Registers
• On-Chip Comparator
• Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse
• Serial Communication Interface (USART), Functions as Asynchronous UART or Synchronous SPI Interface
- Two USARTs (USART0, USART1) On MSP430F14x and MSP430F14x1 Devices
- One USART (USART0) On MSP430F13x Devices
TEXAS INSTRUMENTS MSP430F5340IRGZ - MSP430 microcontroller, 16-bit, 1.8 V, 64 KB, 25MHz, VQFN-48
15.74 EUR
DescriptionThe MSP430F534x MCU configurations feature four 16-bit timers, a high-performance 12-bit ADC, two USCIs, a hardware multiplier, DMA, an RTC module with alarm capabilities, and 38 I/O pins.
Features
• Low Supply-Voltage Range: 3.6 V Down to 1.8 V
• Ultra-Low Power Consumption
- Active Mode (AM): All System Clocks Active
290 µA/MHz at 8 MHz, 3 V, Flash Program Execution (Typical)
150 µA/MHz at 8 MHz, 3 V, RAM Program Execution (Typical)
- Standby Mode (LPM3):
Real-Time Clock (RTC) With Crystal, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wakeup:
1.9 µA at 2.2 V, 2.1 µA at 3 V (Typical)
Low-Power Oscillator (VLO), General-Purpose Counter, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wakeup:
1.4 µA at 3 V (Typical)
- Off Mode (LPM4):
Full RAM Retention, Supply Supervisor Operational, Fast Wakeup:
1.1 µA at 3 V (Typical)
- Shutdown Mode (LPM4.5):
0.18 µA at 3 V (Typical)
• Wake up From Standby Mode in 3.5 µs (Typical)
• 16-Bit RISC Architecture, Extended Memory, up to 25-MHz System Clock
• Flexible Power-Management System
- Fully Integrated LDO With Programmable Regulated Core Supply Voltage
- Supply Voltage Supervision, Monitoring, and Brownout
• Unified Clock System
- FLL Control Loop for Frequency Stabilization
- Low-Power Low-Frequency Internal Clock Source (VLO)
- Low-Frequency Trimmed Internal Reference Source (REFO)
- 32-kHz Watch Crystals (XT1)
- High-Frequency Crystals up to 32 MHz (XT2)
• 16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers
• 16-Bit Timer TA1, Timer_A With Three Capture/Compare Registers
• 16-Bit Timer TA2, Timer_A With Three Capture/Compare Registers
• 16-Bit Timer TB0, Timer_B With Seven Capture/Compare Shadow Registers
• Two Universal Serial Communication Interfaces (USCIs)
- USCI_A0 and USCI_A1 Each Support:
Enhanced UART With Automatic Baud-Rate Detection
IrDA Encoder and Decoder
Synchronous SPI
- USCI_B0 and USCI_B1 Each Support:
I2C
Synchronous SPI
• 12-Bit Analog-to-Digital Converter (ADC) With Internal Reference, Sample-and-Hold, and Autoscan Feature
• Comparator
• Hardware Multiplier Supports 32-Bit Operations
• Serial Onboard Programming, No External Programming Voltage Needed
• 3-Channel Internal DMA
• Basic Timer With RTC Feature
TEXAS INSTRUMENTS MSP430F5342IRGZ - MSP430 microcontroller, 16-bit, 1.8 V, 128 KB, 25MHz, VQFN-48
16.26 EUR
DescriptionThe MSP430F534x MCU configurations feature four 16-bit timers, a high-performance 12-bit ADC, two USCIs, a hardware multiplier, DMA, an RTC module with alarm capabilities, and 38 I/O pins.
Features
• Low Supply-Voltage Range: 3.6 V Down to 1.8 V
• Ultra-Low Power Consumption
- Active Mode (AM): All System Clocks Active
290 µA/MHz at 8 MHz, 3 V, Flash Program Execution (Typical)
150 µA/MHz at 8 MHz, 3 V, RAM Program Execution (Typical)
- Standby Mode (LPM3):
Real-Time Clock (RTC) With Crystal, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wakeup:
1.9 µA at 2.2 V, 2.1 µA at 3 V (Typical)
Low-Power Oscillator (VLO), General-Purpose Counter, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wakeup:
1.4 µA at 3 V (Typical)
- Off Mode (LPM4):
Full RAM Retention, Supply Supervisor Operational, Fast Wakeup:
1.1 µA at 3 V (Typical)
- Shutdown Mode (LPM4.5):
0.18 µA at 3 V (Typical)
• Wake up From Standby Mode in 3.5 µs (Typical)
• 16-Bit RISC Architecture, Extended Memory, up to 25-MHz System Clock
• Flexible Power-Management System
- Fully Integrated LDO With Programmable Regulated Core Supply Voltage
- Supply Voltage Supervision, Monitoring, and Brownout
• Unified Clock System
- FLL Control Loop for Frequency Stabilization
- Low-Power Low-Frequency Internal Clock Source (VLO)
- Low-Frequency Trimmed Internal Reference Source (REFO)
- 32-kHz Watch Crystals (XT1)
- High-Frequency Crystals up to 32 MHz (XT2)
• 16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers
• 16-Bit Timer TA1, Timer_A With Three Capture/Compare Registers
• 16-Bit Timer TA2, Timer_A With Three Capture/Compare Registers
• 16-Bit Timer TB0, Timer_B With Seven Capture/Compare Shadow Registers
• Two Universal Serial Communication Interfaces (USCIs)
- USCI_A0 and USCI_A1 Each Support:
Enhanced UART With Automatic Baud-Rate Detection
IrDA Encoder and Decoder
Synchronous SPI
- USCI_B0 and USCI_B1 Each Support:
I2C
Synchronous SPI
• 12-Bit Analog-to-Digital Converter (ADC) With Internal Reference, Sample-and-Hold, and Autoscan Feature
• Comparator
• Hardware Multiplier Supports 32-Bit Operations
• Serial Onboard Programming, No External Programming Voltage Needed
• 3-Channel Internal DMA
• Basic Timer With RTC Feature
MICROCHIP 30F4011-30IP - MCU, dsPIC, 16-bit, 48 KB, DIL-40
20.8 EUR
Microchip PIC controller - high-performance RISC CPUMicrochip supports the complete performance range of 8-bit, 16-bit and 32-bit microcontrollers with a powerful architecture, flexible storage technologies, extensive easy-to-use development tools and complete technical documentation. The advantages of Microchip microcontroller solutions are quite clear:
• All PIC® MCUs and dsPIC® DSCs help you upscale and downscale your design projects
• The upwardly compatible architecture secures your investment in code development
• Easily switch between 8-bit, 16-bit and 32-bit families
• Pin compatibility between enclosure variants
• Low-risk product development
· Fast time-to-market cycles
· Low overall system costs.
• Many controllers are already shipped with a series of interesting features
• Analogue and digital peripherals can be integrated with minimal component effort
MICROCHIP 30F4012-30ISP - MCU, dsPIC, 16-bit, 48 KB, SPDIP-28
19.87 EUR
Microchip PIC controller - high-performance RISC CPUMicrochip supports the complete performance range of 8-bit, 16-bit and 32-bit microcontrollers with a powerful architecture, flexible storage technologies, extensive easy-to-use development tools and complete technical documentation. The advantages of Microchip microcontroller solutions are quite clear:
• All PIC® MCUs and dsPIC® DSCs help you upscale and downscale your design projects
• The upwardly compatible architecture secures your investment in code development
• Easily switch between 8-bit, 16-bit and 32-bit families
• Pin compatibility between enclosure variants
• Low-risk product development
· Fast time-to-market cycles
· Low overall system costs.
• Many controllers are already shipped with a series of interesting features
• Analogue and digital peripherals can be integrated with minimal component effort
NXP LPC 2103 FBD48 - MCU, ARM, 16-bit, 128 KB, LQFP-48
19.56 EUR
LPC 21xx/22xx 16/32-bit Flash microcontroller, ARM7TDMI- ISP — Flash in-system programming
- IAP — in-application programming
- CPU supply: 1.65 - 1.95 V/3.0 - 3.6 V
- I/O supply: 3.0 - 3.6 V
- Fast I²C/2 UARTs/2 SPIs/PWM
- 4 32-bit timers including RTC and Watchdog
MICROCHIP 30F4012-30ISO - MCU, dsPIC, 16-bit, 48 KB, SO-28
16.57 EUR
Microchip PIC controller - high-performance RISC CPUMicrochip supports the complete performance range of 8-bit, 16-bit and 32-bit microcontrollers with a powerful architecture, flexible storage technologies, extensive easy-to-use development tools and complete technical documentation. The advantages of Microchip microcontroller solutions are quite clear:
• All PIC® MCUs and dsPIC® DSCs help you upscale and downscale your design projects
• The upwardly compatible architecture secures your investment in code development
• Easily switch between 8-bit, 16-bit and 32-bit families
• Pin compatibility between enclosure variants
• Low-risk product development
· Fast time-to-market cycles
· Low overall system costs.
• Many controllers are already shipped with a series of interesting features
• Analogue and digital peripherals can be integrated with minimal component effort
STMICROELECTRONICS STM8S105C4T6 - STM8S 8-bit microcontroller, 16 MHz, 32 KB, 2 KB, LQFP-48
12.33 EUR
The STM8S105x4/6 access line 8-bit microcontrollers offer a flash program memory of between 16 and 32 Kbytes, plus integrated true data EEPROM. All STM8S105x4/6 access line devices offer reduced system costs, outstanding power and robustness, short development cycles and a long service life.
The integrated true data EEPROM reduces system costs and provides 300-k write/erase cycles as well as high-level system integration with internal clock oscillators, watchdog and brown-out reset.
Device performance is ensured by a 16-MHz CPU clock frequency and improved features such as robust I/Os, independent watchdogs (with separate clock source) and a clock security system.
Short development cycles are guaranteed by application scalability across a common product architecture with compatible pinout, memory map and modular peripherals.
An advanced core, which is manufactured using state-of-the-art technology for applications with an operating voltage of 2.95 V to 5.5 V, ensures a long service life for all products in the STM8S range.
Full documentation plus a wide range of development tools are available.
STMICROELECTRONICS STM8 S105C6T6TR - STM8S 8-bit microcontroller, 16 MHz, 32 KB, 2 KB, LQFP-48
12.33 EUR
- STM8 16 MHz CPU
- Upgrade to a higher or downgrade to a lower memory size, without changing the initial layout or software
- Low-power modes
- State-of-the-art digital and analogue peripherals
MICROCHIP ATMEGA 1609-AFR - 8-Bit-ATMega AVR® Mikrocontroller, 16 kB, 20 MHz, TQFP-48
12.53 EUR
Die ATmega808/809/1608/1609-Mikrocontroller gehören zur megaAVR® 0-Serie, die den AVR®-Prozessor mit Hardware-Multiplikator bei bis zu 20 MHz verwendet und eine breite Palette von Flash-Größen bis zu 48 KB, bis zu 6 KB SRAM und 256 Byte EEPROM in 28-, 32-, 40- oder 48-Pin-Gehäusen bietet. Die Serie nutzt die neuesten Technologien von Microchip mit einer flexiblen und stromsparenden Architektur, einschließlich Event System und SleepWalking, genauen analogen Funktionen und fortschrittlichen Peripheriegeräten.
IMG STAGELINE HM 30 - Dynamic headband microphone
36.77 EUR
Dynamic headband microphone• For vocal and speech applications which require free movement
• Microphone windshield
TECHNICAL DATA:
• System dyn./cardioid
• Frequency range 300-16,000 Hz
• Impedance 500 Ohm
• Sensitivity 1 mV/Pa/1 kHz
• Weight 80 g
• Connection, cable 3.5 mm plug,
• adapter 6.3 mm
• Cable approx. 3.5 m
STMICROELECTRONICS STM32 F101C8T6 - ARM®Cortex®-M3 microcontroller, 32-bit, 2-3.6V, 64KB, LQFP-48
12.53 EUR
2.0-V, 64-kB flash, 36-MHz LQFP48• 32-bit ARM Cortex-M3-CPU
• CPU power supply, 2–3.6 V
• 7-channel or 12-channel DMA controller
• Up to 112 I/Os
• Various 16-bit timers
• Up to five USARTs
• Temperature range -40...+85°C
STMICROELECTRONICS STM32 F101CBT6 - ARM®Cortex®-M3 microcontroller, 32-bit, 2-3.6V, 128KB, LQFP-48
14.08 EUR
2.0-V, 128-kB flash, 36-MHz LQFP48• 32-bit ARM Cortex-M3-CPU
• CPU power supply, 2–3.6 V
• 7-channel or 12-channel DMA controller
• Up to 112 I/Os
• Various 16-bit timers
• Up to five USARTs
• Temperature range -40...+85°C
STMICROELECTRONICS STM32F051C6T6 - ARM®Cortex®-M0 Microcontroller, 32-bit, 3V, 32 KB, LQFP-48
13.46 EUR
ARM®-based 32-bit MCU, 16 to 64 KB Flash, 11 timers, ADC,DAC and Communication Interfaces, 2.0-3.6V.
The STM32F051xx microcontrollers contain the powerful ARM® Cortex®-M0 32-bit RISC core, which operates at a frequency of up to 48 MHz, embedded high-speed memory (up to 64 KB flash memory and 8 KB SRAM), as well as a wide range of advanced peripherals and I/Os. All devices offer standard communication interfaces (up to two I2Cs, up to two SPIs, one I2S, one HDMI CEC, and up to two USARTs), a 12-bit ADC, a 12-bit DAC, six 16-bit timers, a 32-bit timer, and a PWM timer with advanced control.
STMICROELECTRONICS STM32F051C8T6 - ARM®Cortex®-M0 microcontroller, 32-bit, 3V, 64 KB, LQFP-48
11.81 EUR
ARM®-based 32-bit MCU, 16 to 64 KB Flash, 11 timers, ADC,DAC and Communication Interfaces, 2.0-3.6V.
The STM32F051xx microcontrollers contain the powerful ARM® Cortex®-M0 32-bit RISC core, which operates at a frequency of up to 48 MHz, embedded high-speed memory (up to 64 KB flash memory and 8 KB SRAM), as well as a wide range of advanced peripherals and I/Os. All devices offer standard communication interfaces (up to two I2Cs, up to two SPIs, one I2S, one HDMI CEC, and up to two USARTs), a 12-bit ADC, a 12-bit DAC, six 16-bit timers, a 32-bit timer, and a PWM timer with advanced control.
MICROCHIP PIC 18F24K50-ISS - 8-bit PICmicro microcontroller, 16 KB, 48 MHz, SSOP-28
13.04 EUR
28/40/44-Pin, Low-Power, High-Performance MicrocontrollersSpecial Microcontroller Features:
• Low-Power, High-Speed CMOS Flash Technology
• C Compiler Optimized Architecture for Re-Entrant Code
• Power Management Features:
- Run: CPU on, peripherals on, SRAM on
- Idle: CPU off, peripherals on, SRAM on
- Sleep: CPU off, peripherals off, SRAM on
• Priority Levels for Interrupts
• Self-Programmable under Software Control
• 8 x 8 Single-Cycle Hardware Multiplier
• Extended Watchdog Timer (WDT): Programmable period from 4 ms to 131s
• Single-Supply In-Circuit Serial Programming™ (ICSP™) via Two Pins
• In-Circuit Debug (ICD) with Three Breakpoints via Two Pins
• Optional dedicated ICD/ICSP Port (44-pin TQFP Package Only)
• Wide Operating Voltage Range:
- F devices: 2.3V to 5.5V
- LF devices: 1.8V to 3.6V
• Flash Program Memory of 10,000 Erase/Write Cycles Minimum and 20-year Data Retention
Extreme Low-Power Management with XLP:
• Sleep mode: 20 nA, typical
• Watchdog Timer: 300 nA, typical
• Timer1 Oscillator: 800 nA @ 32 kHz
• Peripheral Module Disable
Universal Serial Bus Features:
• USB V2.0 Compliant
• Crystal-less Full Speed (12 Mb/s) and Low-Speed Operation (1.5 Mb/s)
• Supports Control, Interrupt, Isochronous and Bulk Transfers
• Supports up to 32 Endpoints (16 Bidirectional)
• 1 Kbyte Dual Access RAM for USB
• On-Chip USB Transceiver
Flexible Oscillator Structure:
• 3x and 4xPLL Clock Multipliers
• Two External Clock modes, Up to 48 MHz (12 MIPS)
• Internal 31 kHz Oscillator
• Internal Oscillator, 31 kHz to 16 MHz
- Factory calibrated to ± 1%
- Self-tune to ± 0.20% max. from USB or secondary oscillator
• Secondary Oscillator using Timer1 @ 32 kHz
• Fail-Safe Clock Monitor: Allows for safe shutdown if any clock stops
Peripheral Features:
• Up to 33 I/O pins plus 3 Input-Only Pins:
- High-current Sink/Source 25 mA/25 mA
- Three programmable external interrupts
- 11 programmable interrupts-on-change
- Nine programmable weak pull-ups
- Programmable slew rate
• SR Latch
• Enhanced Capture/Compare/PWM (ECCP) module:
- One, two or four PWM outputs
- Selectable polarity
- Programmable dead time
- Auto-shutdown and auto-restart
- Pulse steering control
• Capture/Compare/PWM (CCP) module
• Master Synchronous Serial Port (MSSP) module Supporting 3-Wire SPI (all four modes) and I2C™ Master and Slave modes
• Two Analog Comparators with Input Multiplexing
• 10-Bit Analog-to-Digital (A/D) Converter module:
- Up to 25 input channels
- Auto-acquisition capability
- Conversion available during Sleep
• Digital-to-Analog Converter (DAC) module:
- Fixed Voltage Reference (FVR) with 1.024V, 2.048V...
MICROCHIP ATMEGA168PB-AU - 8-bit microcontroller, 16KB, 512B, 1KB, 20 MHz TQFP GRN
11.55 EUR
The ATmega48PB/88PB/168PB is a low-power CMOS 8-bit microcontroller built on the advanced AVR® RISC architecture. By executing powerful commands in a single clock cycle, the ATmega48PB/88PB/168PB achieves\throughputs close to 1 MIPS per MHz. This enables the system designer to optimise the device for power consumption versus processing speed.
MICROCHIP MCP23018-E/SO - I²C bus I/O extension, 16bit, SOIC-28
12.01 EUR
Characteristics:- 16-bit remote bidirectional I/O port:
- I/O pins standard on input
Open drain outputs:
- 5,5V tolerant
- 25 mA sink capable (per pin)
- 400mA Total
High-Speed I2C™ Interface :
- 100kHz
- 400kHz
- 3.4 MHz
Single hardware address pin :
- Voltage input for up to eight devices on the bus
Configurable interrupt output pins:
- Configurable as active-high, active-low or open drain
Configurable interrupt source:
- Interruption in case of change due to configured standard settings or pin change
Polarity reversal register to configure the polarity of the input port data
External reset input
Low standby current:
- 1 µA (-40°C TA +85°C)
- 6µA (+85°C TA +125°C)
Operating voltage:
- 1,8V up to 5,5V up to 5,5V
Available housings:
- 28-pole PDIP (300 mil)
- 28-pole SOIC (300 mi)
MICROCHIP ATSAM3S1AB-AU - Microcontroller, Cortex M3, 64MHz, 64KB Flash,16KB RAM,QFP-48
15.27 EUR
The SAM3S1A is a member of the Microchip's SAM3S series microcontrollers based on the high-performance 32-bit ARM® Cortex®-M3 RISC processor.It operates at a maximum speed of 64MHz and features 64KB of flash memory and 16KB of SRAM. The extensive peripheral set includes a Full Speed USB device port with embedded transceiver, USART, two UARTs, two TWIs (I2C), two SPIs, I2S, PWM timer, three 16-bit timers, RTC, 8-ch 12-bit ADC, and an analog comparator.
The QTouch library offers an easy way to implement buttons, wheels, and sliders. The parallel data capture mode on the PIOs collects data from external devices not compliant with standard memory read protocols, such as low-cost image sensors. DMA transfers the data to memory, offloading the CPU.
The device operates from 1.62V to 3.6V, is available in 48-pin QFP and QFN packages, and is pin-to-pin compatible with the SAM3N1A.
- ARM® Cortex®-M3 revision 2.0 running at up to 64 MHz
- Memory Protection Unit (MPU)
- DSP Instructions, Thumb®-2 instruction set
- 64 Kbytes Single Plane embedded Flash, 128-bit wide access, memory accelerator
- 16 Kbytes embedded SRAM
- 16 Kbytes ROM with embedded bootloader routines (UART, USB) and IAP routines
- Embedded voltage regulator for single-supply operation
- Power-on-Reset (POR), Brown-out Detector (BOD) and Watchdog for safe operation
- Quartz or ceramic resonator oscillators: 0.6 to 30MHz main power with Failure Detection and low power 32.768 kHz for RTC or device clock
- High precision 8/12 MHz factory trimmed internal RC oscillator with 4 MHz default frequency for device startup. In-application trimming access for frequency adjustment
- Slow clock internal RC oscillator as permanent low-power mode device clock
- Two PLLs up to 130 MHz for device clock and for USB
- Temperature Sensor
- Up to 22 peripheral DMA (PDC) channels
- Sleep and Backup modes, down to < 2 µA in Backup mode
- Ultra low power RTC
- 48-lead LQFP, 7x7 mm, pitch 0.5 mm
- 48-pad QFN, 7x7 mm, pitch 0.5 mm
- Industrial (-40° C to +85° C)
- USB 2.0 Device and Embedded Host: 12 Mbps, up to 8 bidirectional Endpoints and Multi-packet Ping-pong Mode. On-Chip Transceiver
- USB 2.0 Device: 12 Mbps, 2668 byte FIFO, up to 8 bidirectional Endpoints. On-Chip Transceiver
- 1 USARTs with ISO7816, IrDA®, RS-485, SPI, Manchester and Modem Mode
- Two 2-wire UARTs
- 2 Two Wire Interface (I2C compatible), 1 SPI, 1 Serial Synchronous Controller (I2S)
- two 3-channel 16-bit Timer Counters with capture, waveform, compare and PWM mode. Quadrature Decoder Logic and 2-bit Gray Up/Down Counter for Stepper Motor
- 4-channel 16-bit PWM with Complementary Output, Fault Input, 12-bit Dead Time Generator Counter for Motor Control
- 32-bit Real-time Timer and RTC with calendar and alarm features<...
MICROCHIP MCP 23S17-E/SO - I/O extension, 16bit, 10 MHz, serial, SPI, SO-28
11.76 EUR
Properties:- 16-bit bi-directional remote I/O port
- The I/O pins are provided for input by default.
- High-speed I2C ™ interface (MCP23017)
- 100 kHz
- 400 kHz
- 1.7 MHz
- High-speed SPI interface (MCP23S17)
- 10 MHz (max.)
- Three hardware address pins for up to eight devices on the bus
- Configurable interrupt output pins
- Configurable as Active-High, Active-Low or Open-Drain
- INTA and INTB can be configured to work independently or together
- Configurable interrupt source
- Interrupt-on-Change of configured register standards or pin changes
- Polarity reversal register for configuring polarity of input port data
- External reset input
- Low standby current: 1 µA (max.)
- Operating voltage:
- 1.8 V to 5.5 V at -40 ° C to + 85 ° C
- 2.7 V to 5.5 V at -40 ° C to + 85 ° C
- 4.5 V to 5.5 V at -40 ° C to + 125 ° C
Design:
- 28-pole PDIP (300 mil)
- 28-pole SOIC (300 mil)
- 28-pole SSOP
- 28-pole QFN
ADAFRUIT DEBO MOTODRIVER4 - Developer boards - servo driver, 16 channel, 12 bit, PCA9685
29.38 EUR
PWM driver board with integrated clock• 6-address dialing pins
• adjustable frequency PWM up to about 1.6 kHz
• 12 bit resolution for each output
• configurable push-pull or open-drain output
• Dimensions: 62.5 x 25.4 x 3 mm
Scope of delivery
• Servo driver board
• solderable power terminal
• various solderable connectors
MICROCHIP MCP 23017-E/SP - I/O extension, 16bit, 1.8 - 5V, serial, I2C, DIP-28
11.86 EUR
16-Bit I/O Expander with Serial InterfaceFeatures:
• 16-Bit Remote Bidirectional I/O Port:
• I/O pins default to input
• High-Speed I2C Interface (MCP23017):
• 100kHz
• 400kHz
• 1.7MHz
• High-Speed SPI Interface (MCP23S17):
• 10 MHz (maximum)
• Three Hardware Address Pins to Allow Up to Eight Devices On the Bus
• Configurable Interrupt Output Pins:
• Configurable as active-high, active-low or open-drain
• INTA and INTB Can Be Configured to Operate Independently or Together
• Configurable Interrupt Source:
• Interrupt-on-change from configured register defaults or pin changes
• Polarity Inversion Register to Configure the Polarity of the Input Port Data
• External Reset Input
• Low Standby Current: 1 µA (max.)
• Operating Voltage:
• 1.8V to 5.5V @ -40°C to +85°C
• 2.7V to 5.5V @ -40°C to +85°C
• 4.5V to 5.5V @ -40°C to +125°C
Packages:
• 28-pin QFN, 6 x 6 mm Body
• 28-pin SOIC, Wide, 7.50 mm Body
• 28-pin SPDIP, 300 mil Body
• 28-pin SSOP, 5.30 mm Body
ADAFRUIT DEBO SHD MOTOR - Developer Boards Shield - Servo, 16 Channel, 12 Bit, PCA9685
35.27 EUR
PWM driver Shield with integrated clock- 6 address selection pins
- adjustable frequency PWM up to approx. 1.6 kHz
- 12 bit resolution for each output
- configurable push-pull or open-drain output
- Dimensions: 54 x 70 x 3 mm
STMICROELECTRONICS STM 32F030F4P6 - ARM®Cortex®-M0+ microcontroller, 32-bit, 3V, 16 KB, TSSOP-20
10.97 EUR
Value-Line 32-bit MCU, ARM- 48 MHz
- 16 Kb Flash
- Timer
- 55 I/Os
- Five-channel DMA
- Communication interface
- Supply voltage: 2.4 V - 3.6 V
MICROCHIP MCP23017-E/SO - I/O extension, 16bit, 1.8 - 5V, serial, I2C, SO-28
11.66 EUR
16-Bit I/O Expander with Serial InterfaceFeatures:
• 16-Bit Remote Bidirectional I/O Port:
• I/O pins default to input
• High-Speed I2C Interface (MCP23017):
• 100kHz
• 400kHz
• 1.7MHz
• High-Speed SPI Interface (MCP23S17):
• 10 MHz (maximum)
• Three Hardware Address Pins to Allow Up to Eight Devices On the Bus
• Configurable Interrupt Output Pins:
• Configurable as active-high, active-low or open-drain
• INTA and INTB Can Be Configured to Operate Independently or Together
• Configurable Interrupt Source:
• Interrupt-on-change from configured register defaults or pin changes
• Polarity Inversion Register to Configure the Polarity of the Input Port Data
• External Reset Input
• Low Standby Current: 1 µA (max.)
• Operating Voltage:
• 1.8V to 5.5V @ -40°C to +85°C
• 2.7V to 5.5V @ -40°C to +85°C
• 4.5V to 5.5V @ -40°C to +125°C
Packages:
• 28-pin QFN, 6 x 6 mm Body
• 28-pin SOIC, Wide, 7.50 mm Body
• 28-pin SPDIP, 300 mil Body
• 28-pin SSOP, 5.30 mm Body
MICROCHIP PIC 18F24K50-ISP - 8-bit PICmicro microcontroller, 16 KB, 48 MHz, DIP-28
13.72 EUR
28/40/44-Pin, Low-Power, High-Performance MicrocontrollersSpecial Microcontroller Features:
• Low-Power, High-Speed CMOS Flash Technology
• C Compiler Optimized Architecture for Re-Entrant Code
• Power Management Features:
- Run: CPU on, peripherals on, SRAM on
- Idle: CPU off, peripherals on, SRAM on
- Sleep: CPU off, peripherals off, SRAM on
• Priority Levels for Interrupts
• Self-Programmable under Software Control
• 8 x 8 Single-Cycle Hardware Multiplier
• Extended Watchdog Timer (WDT): Programmable period from 4 ms to 131s
• Single-Supply In-Circuit Serial Programming™ (ICSP™) via Two Pins
• In-Circuit Debug (ICD) with Three Breakpoints via Two Pins
• Optional dedicated ICD/ICSP Port (44-pin TQFP Package Only)
• Wide Operating Voltage Range:
- F devices: 2.3V to 5.5V
- LF devices: 1.8V to 3.6V
• Flash Program Memory of 10,000 Erase/Write Cycles Minimum and 20-year Data Retention
Extreme Low-Power Management with XLP:
• Sleep mode: 20 nA, typical
• Watchdog Timer: 300 nA, typical
• Timer1 Oscillator: 800 nA @ 32 kHz
• Peripheral Module Disable
Universal Serial Bus Features:
• USB V2.0 Compliant
• Crystal-less Full Speed (12 Mb/s) and Low-Speed Operation (1.5 Mb/s)
• Supports Control, Interrupt, Isochronous and Bulk Transfers
• Supports up to 32 Endpoints (16 Bidirectional)
• 1 Kbyte Dual Access RAM for USB
• On-Chip USB Transceiver
Flexible Oscillator Structure:
• 3x and 4xPLL Clock Multipliers
• Two External Clock modes, Up to 48 MHz (12 MIPS)
• Internal 31 kHz Oscillator
• Internal Oscillator, 31 kHz to 16 MHz
- Factory calibrated to ± 1%
- Self-tune to ± 0.20% max. from USB or secondary oscillator
• Secondary Oscillator using Timer1 @ 32 kHz
• Fail-Safe Clock Monitor: Allows for safe shutdown if any clock stops
Peripheral Features:
• Up to 33 I/O pins plus 3 Input-Only Pins:
- High-current Sink/Source 25 mA/25 mA
- Three programmable external interrupts
- 11 programmable interrupts-on-change
- Nine programmable weak pull-ups
- Programmable slew rate
• SR Latch
• Enhanced Capture/Compare/PWM (ECCP) module:
- One, two or four PWM outputs
- Selectable polarity
- Programmable dead time
- Auto-shutdown and auto-restart
- Pulse steering control
• Capture/Compare/PWM (CCP) module
• Master Synchronous Serial Port (MSSP) module Supporting 3-Wire SPI (all four modes) and I2C™ Master and Slave modes
• Two Analog Comparators with Input Multiplexing
• 10-Bit Analog-to-Digital (A/D) Converter module:
- Up to 25 input channels
- Auto-acquisition capability
- Conversion available during Sleep
• Digital-to-Analog Converter (DAC) module:
- Fixed Voltage Reference (FVR) with 1.024V, 2.048V...
STMICROELECTRONICS STM32C031C4T6 - ARM®Cortex®-M0+ microcontroller, 16 KB flash, LQFP-48
12.01 EUR
32-bit ARM Cortex-M0+ Microcontroller, Flash: 16kB, 48MHz, SRAM: 12kB, LQFP-48The STM32C031x4/x6 mainstream microcontrollers are based on the powerful ARM ® Cortex ® -M0+ 32-bit RISC core, which operates at a frequency of up to 48 MHz. They offer a high level of integration and are ready for IoT for a wide range of consumer, industrial and device applications.
The devices include a memory protection unit (MPU), embedded high-speed memory (12 KB SRAM and up to 32 KB flash program memory with read and write protection), DMA, a wide range of system functions, advanced I/O and peripherals. They offer standard communication interfaces (one I 2 CS, one SPI / one I2 S and two USARTs), a 12-bit ADC (2.5 MSPs) with up to 21 channels, a low-power RTC, an extended PWM timer, four 16-bit general-purpose timers, two watchdog timers and a SysTick timer.
The devices operate at ambient temperatures from -40 to 125°C and with supply voltages from 2.0 V to 3.6 V. The optimized dynamic consumption in combination with power-saving modes allows the design of low-power applications.