SCHNEIDER ELECTRIC SE MTN6500-0103 - SpaceLogic KNX IP Router DIN Rail
339.26 EUR
Browse the detailed sheet with complete information, compare prices and identify the features of PRODUCTNAME, proposed at the cost of PRICE CURRENCY; belongs to the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
KNX Home Automation
KNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
KNX IP Router DIN Rail
Note:
This application requires ETS 5 or higher.
Contents:
With bus connecting terminal and cable cover.
EAN: 3606489917845
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
KNX Home Automation
KNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
KNX IP Router DIN Rail
- The SpaceLogic KNX IP Router allows forwarding of telegrams between different lines through a LAN (IP) as a fast backbone.
- In addition this KNX IP Router is suited to connect a PC to the KNX network e.g. for ETS programming.
- The KNX IP Router supports KNX Security which can be enabled in ETS.
- As secure router the device allows coupling of not secured communication on KNX TP to a secured IP backbone.
- For the interface functionality (tunneling) KNX security prevents from unauthorized access.
- The router supports up to 8 tunneling channels.
- For each tunneling channel a separate individual address must be configured.
- The IP address can be obtained by a DHCP server or by manual configuration (ETS) respectively.
- This KNX IP Router works according to the KNXnet/IP specification using the core, the device management, the tunneling and the routing part.
- The SpaceLogic KNX IP Router has an extended filter table for main group 0..31 and is able to buffer up to 150 telegrams.
- The Router is powered by the KNX bus.
- An additional power supply is not needed.
- With 2 integrated push-buttons for testing purpose and 3 status LEDs.
- For installation on DIN rails TH35 according to EN 60715.
- The bus is connected using a bus connecting terminal.
- The LAN network is conneted via RJ45 socket.
Note:
This application requires ETS 5 or higher.
Contents:
With bus connecting terminal and cable cover.
EAN: 3606489917845
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
SCHNEIDER ELECTRIC SE MTN6500-0101 - SpaceLogic KNX Coupler DIN Rail
234.45 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
KNX Coupler DIN Rail
- For logical connection and electrical isolation of lines and areas.
- The device supports KNX Security.
- This option can be activated in the ETS.
- As a secure line coupler, the device enables the forwarding of both secured and unsecured communication.
- In addition, access to the device itself (e.g. for a download) is protected by KNX Security.
- The device has a filter table (8k bytes) and ensures a galvanic separation between the lines.
- The coupler supports KNX longframes and is compatible with the ETS 5 software.
- With 2 integrated push-buttons for testing purpose and 3 status LEDs.
- For installation on DIN rails TH35 according to EN 60715.
- The bus is connected using bus connecting terminals.
KNX software functions:
- The device can be used as a area / line coupler or as a repeater for forming line segments in existing or new KNX systems.
- The function as a coupler or repeater can be parameterised.
Functions as coupler:
- Use as a area or line coupler depending on the physical address.
- Reduction of the bus load through the filter function (filter table).
- Support of the full address area (Group 0-31) with filter function.
- Forwarding of individual addressed telegrams (sub line => main line, main line => sub line) can be parameterised.
- Forwarding of group telegrams (sub line => main line, main line => sub line) can be parameterised.
- Telegram repetitions in the event of transmission errors can be set separately for group telegrams, broadcast telegrams and physically addressed telegrams.
- Telegram confirmation for group telegrams and physically addressed telegrams can be parameterised separately.
Functions as repeater:
- Expansion of a line into segments.
- Telegram repetitions in the event of transmission errors can be set separately for group telegrams, broadcast telegrams and physically addressed telegrams.
Contents:
With 2 bus connecting terminals and 2 cable covers.
SCHNEIDER ELECTRIC SE MTN6260-7760 - SpaceLogic KNX Touch IP 7-inch Smart Screen, black
512.39 EUR
The SpaceLogic KNX Touch IP 7 inch is a touch screen for displaying the visualisations of Wiser for KNX and spaceLYnk logic controllers. The screen can be installed in both residential and commercial buildings and in new or existing KNX installations. The touch panel can display widget-based touch visualisation or PC/tablet visualisation and supports the display of realistic graphics. It can also display the new Wiser KNX app if the user wishes to control the KNX installation in a similar way to controlling with a smartphone. The entire interaction with the touch panel is very simple and efficient and has been adapted to the needs of the modern concept of intelligent houses and buildings. Can be installed horizontally or vertically, in portrait or landscape format. The touch panel is equipped with an integrated application that makes configuration quick and simple.
SCHNEIDER ELECTRIC SE MTN6260-7770 - SpaceLogic KNX Touch IP 7-inch Smart Screen, white
512.39 EUR
The SpaceLogic KNX Touch IP 7 inch is a touch screen for displaying the visualisations of Wiser for KNX and spaceLYnk logic controllers. The screen can be installed in both residential and commercial buildings and in new or existing KNX installations. The touch panel can display widget-based touch visualisation or PC/tablet visualisation and supports the display of realistic graphics. It can also display the new Wiser KNX app if the user wishes to control the KNX installation in a similar way to controlling with a smartphone. The entire interaction with the touch panel is very simple and efficient and has been adapted to the needs of the modern concept of intelligent houses and buildings. Can be installed horizontally or vertically, in portrait or landscape format. The touch panel is equipped with an integrated application that makes configuration quick and simple.
SCHNEIDER ELECTRIC SE MTN6502-0105 - SpaceLogic KNX IP Interface DIN Rail
216.31 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
KNX IP Interface DIN Rail
- The SpaceLogic KNX IP Interface is an interface between IP and KNX.
- You can access the KNX Bus from every point of your LAN.
- The SpaceLogic KNX IP Interface can be used as programming interface for ETS 5 Software and allows to access the KNX bus over the Internet via VPN.
- The device supports KNX Security which can be enabled in ETS.
- With its interface functionality (tunneling) KNX security prevents from unauthorized access.
- The device supports up to 8 tunneling channels.
- For each tunneling channel a separate individual address must be configured.
- With 2 integrated push-buttons to select the tunneling channel and 3 status LEDs.
- The Interface is powered by the KNX bus.
- An additional power supply is not needed.
- For installation on DIN rails TH35 according to EN 60715.
- The bus is connected using a bus connecting terminal.
- The LAN network is conneted via RJ45 socket.
Note:
This application requires ETS 5 or higher.
Contents:
With bus connecting terminal and cable cover.
SCHNEIDER ELECTRIC SE LSS100300 - SpaceLogic KNX BMS IP Gateway
832.66 EUR
The SpaceLogic KNX BMS IP Gateway is a bidirectional multifunction device that allows you to integrate KNX installations with building automation devices. The main communication interface is KNX TP and IP supporting the BACnet protocol. There are three components combined in one device: KNX IP router (max. 500 objects), KNX IP interface and DPSU choke power supply. The Gateway allows professional installers to deploy KNX installations more cost and time effectively thanks to the combination of features. Configuration and commissioning is straightforward and fast thanks to an embedded application that simplifies the process. Simpler architecture is possible because the use of IP routers and KNX power supplies is no longer necessary, provided certain parameters are taken into account. The Gateway is designed for commercial installations and certified by BTL as an application-specific controller (B-ASC), which ensures 100% compatibility and at the same time guarantees seamless integration with any BACnet device.
SCHNEIDER ELECTRIC SE MTN6513-1201 - SpaceLogic KNX Power Supply 1280 mA
374.51 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
KNX Power supply
- The SpaceLogic KNX power supply generates the bus voltage for the KNX line.
- The power supply has two outputs - one KNX output with integrated choke and one DC 30 V output for additional devices.
- The power supply has a floating signalling contact for operation and diagnostic messages.
Features:
- Nominal current can be distributed as desired. Reset button to disconnect the power and reset the bus devices.
- Short-circuit proof.
- Surge-proof.
- Open-circuit proof.
- For operation in installations with emergency power supply.
- For installation on DIN rails TH35 according to EN 60715.
- The bus is connected using a bus connecting terminal.
Contents:
With bus connecting terminal and cable cover.
SCHNEIDER ELECTRIC SE MTN6513-1203 - SpaceLogic KNX Power Supply 320 mA
177.03 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
KNX Power supply
- The SpaceLogic KNX power supply generates the bus voltage for the KNX line.
- The power supply has two outputs - one KNX output with integrated choke and one DC 30 V output for additional devices.
- Two identical power supply units can be connected in parallel to double the output current.
- The power supply has a floating signalling contact for operation and diagnostic messages.
Features:
- Nominal current can be distributed as desired.
- Reset button to disconnect the power and reset the bus devices.
- Short-circuit proof.
- Surge-proof.
- Open-circuit proof.
- For operation in installations with emergency power supply.
- For installation on DIN rails TH35 according to EN 60715.
- The bus is connected using a bus connecting terminal.
Contents:
With bus connecting terminal and cable cover.
SCHNEIDER ELECTRIC SE MTN6805-0008 - SpaceLogic KNX Switch/Blind Extension, light grey
149.49 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
KNX Switch/Blind Extension
- The SpaceLogic KNX Switch/Blind Extension is a switch actuator that extends the channels of a SpaceLogic KNX Switch/Blind Master or a SpaceLogic KNX Universal Dimming Master.
- For independent control of up to 4 blind/roller shutter drives or for switching up to 8 loads via make contacts.
- The function of the blind or switching channels is freely configurable.
- The ETS programming is carried out in the ETS application of the Master.
- The Master controls the function of the Extension, the power supply and communication to the KNX bus.
- All outputs can be operated manually using the Master’s keypad.
- On the Extension a green LED indicates readiness for operation, a red manual operation LED shows whether the Extension is controlled manually.
- For installation on DIN rails TH35 according to EN 60715. The connection to the Master or another Extension is made either with a Module Link or with a Cable Link.
KNX software functions:
The functions are set in the KNX application of the Master
Contents:
With Module Link.
SCHNEIDER ELECTRIC SE MTN6003-0011 - SpaceLogic KNX Switch Actuator 1g, 3 binary inputs
162.87 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
KNX Flush Mounted Switch Actuator
- 1-gang switch actuator with three binary inputs for installation in a size 60 switch box.
- Floating contacts can be connected to the three inputs.
- Optionally, an NTC temperature sensor can be connected to the third input.
- The inputs and the KNX are connected via a 6-core, approx. 30 cm long, connecting cable.
- The connecting cable for the inputs can be extended to a max. of 10 m.
- KNX Secure compatible
KNX software functions:
Switch actuator functions:
- Operation as break contact or make contact.
- Selection of default position on bus voltage failure/recovery.
- Switch on and/or off delay.
- Time switch function.
- Switching.
- Status feedback.
- Disable function or priority control.
- Scene function (64).
- Status feedback object can be inverted.
Input function:
- Free assignment of the switching, dimming, blind and valuator functions.
- Locking object.
- Behaviour when bus voltage recovers.
- Temperature, Brightness, Color temperature, Switching: two switch objects per input.
- Command on rising/falling edge (ON, OFF, TOGGLE, no reaction).
- Dimming: Single surface and dual-surface operation.
- Time between dimming and switching and dim step values.
- Telegram repetition and send stop telegram.
- Blinds: Command on rising edge (none, UP, DOWN, TOGGLE), Operation concept (Step - Move - Step or Move - Step).
- Time between short and long operation.
- Slat adjustment time.
- Valuator and lightscene ext. input: Edge (push-button as make contact, push-button as break contact, switch) and value on edge.
- Value adjustment via long push-button action for valuator.
- Lightscene ext. unit with memory function.
- Logic module: Logic operation, Converter, Blocking element, Comparator, Limit value
SCHNEIDER ELECTRIC SE MTN6705-0008 - SpaceLogic KNX Switch/Blind Master, light grey
235.17 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
SpaceLogic KNX Switch/Blind Master
- For independent control of up to 4 blind/roller shutter drives or for switching up to 8 loads via make contacts.
- The function of the blind or switching channels is freely configurable.
- All blind/switch outputs can be operated manually using push-buttons.
- The number of channels can be increased by connecting SpaceLogic KNX Switch/Blind Extensions.
- A maximum of 2 Extensions can be connected to the Master, so up to 24 loads can be switched or 12 blind drives can be controlled.
- The Master controls the Extensions, their power supply and communication with the bus.
- Operating elements: Push-buttons for switching to manual operation, for choosing the device to be operated (Master and Extensions) and for channel control.
- With integrated bus coupler.
- For installation on DIN rails TH35 according to EN 60715.
- The bus is connected using a bus connecting terminal.
General KNX software functions:
Energy saving, device safety, device health, manual operation, PIN code for firmware update.
Blind actuator functions:
Running time, idle time, step interval, locking function, movement range limits, weather alarm, 8-bit positioning for height and slats, scenes, status and feedback function.
Switch actuator functions:
Operation as break contact/make contact, programmable behaviour for download, delay functions for each channel, staircase lighting function with/without manual OFF function, switch-off prewarning for staircase lighting function, scenes, central function, locking function, logic operation or priority control, status feedback function for each channel.
Contents:
With bus connecting terminal.
SCHNEIDER ELECTRIC SE LSS100400 - SpaceLogic KNX hybrid module
174.24 EUR
The SpaceLogic KNX hybrid module is a device that connects to a Wiser for KNX or spaceLYnk controller and allows them to support a wireless connection. It is compatible with Schneider wireless Wiser devices (the list of supported devices is growing constantly and may vary from country to country). New or existing KNX installations can be easily upgraded with wireless devices without the need for any additional KNX cables. Wireless window/door sensors, motion sensors, water leak sensors and temperature/humidity sensors can easily be added to the existing KNX installation. Power outlets or smart plugs can be added and switched on and off remotely. Wireless devices can be controlled from the KNX devices. Conversely, any KNX device can be controlled from the wireless Wiser devices. The new Wiser KNX app can be used to control all devices, create schedules, moments (scenes) and automations and receive notifications.
SCHNEIDER ELECTRIC SE MTN6513-1202 - SpaceLogic KNX Power Supply 640 mA
220.91 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
KNX Power supply
- The SpaceLogic KNX power supply generates the bus voltage for the KNX line.
- The power supply has two outputs - one KNX output with integrated choke and one DC 30 V output for additional devices.
- Two identical power supply units can be connected in parallel to double the output current.
- The power supply has a floating signalling contact for operation and diagnostic messages.
Features:
- Nominal current can be distributed as desired.
- Reset button to disconnect the power and reset the bus devices.
- Short-circuit proof.
- Surge-proof.
- Open-circuit proof.
- For operation in installations with emergency power supply.
- For installation on DIN rails TH35 according to EN 60715.
- The bus is connected using a bus connecting terminal.
Contents:
With bus connecting terminal and cable cover.
SCHNEIDER ELECTRIC SE MTN6725-0101 - SpaceLogic KNX DALI Gateway Pro
447.58 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
KNX DALI Gateway Pro
- The SpaceLogic KNX DALI Gateway Pro controls electronic ballasts with DALI interface via the KNX installation bus.
- The gateway is DALI 2.0 multi-master certified.
- The gateway supports KNX longframe communication and is compatible with KNX Security telegram/devices and can be enable in the ETS 5 software.
- In addition, access to the device itself (e.g. for a download) is protected by KNX Security
- It supports ballasts according to EN 62386-102 ed1 (DALI1), devices according to EN 62386-102 ed2 (DALI2), as well as DALI2 motion sensors and light sensors according to EN 62386-303 and EN 62386-304.
- The gateway has a DALI output which can control up to 64 ECGs. In addition, up to 8 DALI2 motion detectors or light sensors can be connected.
- Multi-master operation according to EN 62386-103 ed2 is permitted.
- The required power supply for the connected ECGs and motion sensors is provided directly from the device.
- Additional DALI power supplies are not required.
- Per gateway the ECGs can be controlled in 16 groups. In addition to the group control the gateway also allows individual control of up to 64 ECGs.
- In addition the gateway allows the operation of single battery emergency lights (EN 62386-202). Emergency lighting systems with central battery are also supported.
- DALI commissioning and configuration, as well as group assignment and scene setting, can be carried out using: the device (display and operating buttons which can be optionally disabled), the DCA software, the integrated Web server
Functions:
- Two separate user profiles with their own password for IP-webserver
- Effect module with 16 effects and a total of up to 500 commands
- Configuring: scenes, effects, service, maintenance, burn-in, operating hours
- Fast Firmware upgrade possible via IP port
- Operating: device, ECGs, groups and broadcast
- Colour control via KNX for broadcast and groups
- Displays: Status and error messages
- DT8-Colour control on the DALI side, up to 16 colour templates with up to 300 commands basing on a weekly timer
- DALI-scenes with brightness and colour values
- Scene number 1-64 can be flexible distributed over several devices
- Tunable white control to improve the environment for human beings. Colour control i.e. product presentation, advertising
- Possibility to lock the IP-port
- Possibility to access as User or...
SCHNEIDER ELECTRIC SE MTN6502-0101 - SpaceLogic KNX USB Interface DIN Rail
192.49 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
KNX USB Interface DIN Rail
- For connecting a programming or diagnostics device with a USB 2.0 interface to the KNX.
- The USB connector (Type C) is galvanic isolated from the KNX bus.
- It can be used as a programming interface for ETS Software Version 4 (or higher).
- The device is programmed locally with the physical address and does not have a programming button and programming LED.
- With 2 status LEDs.
- The KNX USB interface supports KNX ''longframe” communication and is compatible with KNX security telegrams / devices.
- This allows faster KNX downloads if supported by the target device (e.g. MTN6725-0001).
- For installation on DIN rails TH35 according to EN 60715.
- The bus is connected using a bus connecting terminal.
Contents:
With bus connecting terminal and cable cover.
SCHNEIDER ELECTRIC SE MTN6003-0012 - SpaceLogic KNX Blind/Switch Actuator 2g with 3 binary inputs
179.67 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
SpaceLogic KNX Flush Mounted Blind/Switch actuator
- 1-gang blind actuator or 2-gang switch actuator with three binary inputs for installation in a size 60 switch box.
- Floating contacts can be connected to the three inputs.
- Optionally, an NTC temperature sensor can be connected to the third input.
- The inputs and the KNX are connected via a 6-core, approx. 30 cm long, connecting cable.
- The connecting cable for the inputs can be extended to a max. of 10 m.
- KNX Secure compatible
KNX software functions:
Blind actuator function:
- Operation mode: Blinds, roller shutters, awnings or ventilation flaps.
- Raising or lowering times with extension for the upper limit position.
- Status feedback of the position or of the slat position.
- Active/passive status feedback, cycl. status feedback function.
- Up to 5 safety functions (3 wind alarms, 1 rain alarm, 1 frost alarm).
- Cycl. monitoring. Sun protection function with fixed and variable positions.
- Shading controls with heating/cooling automatic mode and presence function.
- Behaviour when bus voltage fails/recovers.
- Status feedback delay after bus voltage recovery.
- Priority function.
- Scene function (64).
- Memory function for scenes.
- Input function: Free assignment of the switching, dimming, blind and valuator functions.
- Locking object.
- Behaviour when bus voltage recovers. Temperature, Brightness, Color temperature, Switching: two switch objects per input.
- Command on rising/falling edge (ON, OFF, TOGGLE, no reaction).
- Dimming: Single surface and dual-surface operation. Time between dimming and switching and dim step values.
- Telegram repetition and send stop telegram.
- Blinds: Command on rising edge (none, UP, DOWN, TOGGLE), Operation concept (Step - Move - Step or Move - Step).
- Time between short and long operation.
- Slat adjustment time.
- Valuator and Scene ext. input: Edge (push-button as make contact, push-button as break contact, switch) and value on edge.
- Value adjustment via long push-button action for valuator.
- Scene ext. unit with memory function.
- Logic module: Logic operation, Converter, Blocking element, Comparator, Limit value
SCHNEIDER ELECTRIC SE MTN6730-0002 - SpaceLogic KNX Valve Drive Controller
205.36 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
KNX Valve Drive Controller
- For actuation of electrothermal valve drives for heating or cooling ceilings.
- The valve drive controller has 6 electronic outputs.
- Up to 4 valve drives (230 V AC) or 2 valve drives (24 V AC) can be connected to each output.
- Both de-energized closed and de-energized opened valve drives can be connected.
- In addition, the valve drive controller contains 6 integrated room temperature controllers (RTC) which operate independently of each other.
- The correcting variable outputs of these RTCs can be linked internally with the valve outputs, so that temperature control and valve actuation can be performed by a single bus device only, if required.
- In this case, no external room temperature controller (e.g. push-button with RTC) is required.
- As the valve outputs can be controlled individually, an external RTC can also be used at any time.
- The integrated room temperature controllers can send the correcting variable telegram to the bus and thus control other heating actuators or fan coil actuators.
- The outputs are either switch activated (1 bit) or PWM signal (1 byte) activated.
- Each output is overload-protected and short-circuit-protected.
- All outputs can be operated manually using push-button operation.
- Building site operation is possible.
- For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal.
KNX software functions - valve:
valve activation (deenergised opened / closed) can be configured for each output, actuator evaluation as ''Switching, 1-bit”, ''Constant, 1-byte” or ''Constant 1-byte with actuator limiting value and hysteresis”, status feedback, collective feedback of all valve states via 4-byte telegram, combined valve status via 1 byte, failure signal of the valve operating voltage can be configured, overload and short-circuit signal for each valve output, automatic valve rinsing, summer/winter switch-over for valve outputs, valve command value limit, forced position configurable, activation of service mode with defined valve position
KNX software functions - RTC:
operating modes ''Heating”, ''Cooling”, ''Heating and Cooling” each with or without additional level, configuration of the temperature setpoints as relative (derived from basic setpoint) or absolute (independent setpoint temperatures for each operating mode), PI control, PWM or switching 2-point feedback control, automatic or...
SCHNEIDER ELECTRIC SE MTN6810-0102 - SpaceLogic KNX Universal Dimming Extension
123.85 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
KNX Universal Dimming Extension
- The SpaceLogic KNX Universal Dimming Extension is a dimming actuator that extends the channels of a SpaceLogic KNX Universal Dimming Master.
- For independent control of up to 2 dimmable loads such as dimmable LED lamps, incandescent lamps, HV halogen lamps, LV halogen lamps using dimmable wound transformers or electronic transformers or dimmable compact fluorescent lamps. (leading and trailing-edge phases)
- The ETS programming is carried out in the ETS application of the Master.
- The Master controls the function of the Extension, the power supply and communication to the KNX bus.
- Channel status is displayed via LEDs on the Master’s keypad.
- With screw terminals, short-circuit, open circuit and excess temperature protection with soft start lamp start.
- Different phases can be connected.
- All outputs can be operated manually using push-buttons of the Master (On/Off, Dimm UP/Down, LED mode/Automode, One/Two button operation).
- A green LED indicates readiness for operation, a red manual operation LED shows whether the Extension is controlled manually.
- For installation on DIN rails TH35 according to EN 60715.
- The connection to the Master or another Extension is made either with a Module Link or with a Cable Link.
Dimmer actuator functions:
Dimming operation by KNX, dimming operation by manual switch, enable/disable manual mode by bus, automatic dimming operating mode or special leading edge phase for RL LED mode, various dimming curves and dimming rates, same dimming time, minimum/maximum dimming value, starting behaviour, 50% brightness when starting ESL/CFL lamp, dimming/value object switches channel, ON/OFF delay, staircase lighting function (with/without manual OFF function, non-/retriggerable, prewarning function), scenes (up to 16 internally stored brightness values can be retrieved), priority control, disable function (behaviour of locking), status feedback (switching state, brightness value, fault), behaviour on bus voltage recovery/download
Contents:
With Module Link.
SCHNEIDER ELECTRIC SE MTN6003-0013 - SpaceLogic KNX Universal Dimming Acutator 1g, 3 bin. inputs
228.49 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
SpaceLogic KNX Flush Mounted Universal Dimming Acutator
- 1-gang universal dimming actuator with three inputs for installation in a size 60 switch box.
- Floating contacts can be connected to the three inputs.
- Optionally, an NTC temperature sensor can be connected to the third input.
- The inputs and the KNX are connected via a 6-core, approx. 30 cm long, connecting cable.
- The connecting cable for the inputs can be extended to a max. of 10 m.
- KNX Secure compatible
KNX software functions:
Dimming actuator function:
- Switching and dimming lamps.
- Switch on and dimming behaviour can be adjusted.
- Feedback of the switching state and the brightness value.
- ''Soft ON”, ''Soft OFF” and time dimmer.
- Dimming or jumping to brightness values.
- Time-delayed switch off when a switch off brightness is not reached.
- Short circuit and load failure signal.
- 64 Scene function.
- Blocked operation via an object with parameterisable brightness value at the beginning and the end of blocking.
- Behaviour of the dimming actuator after bus voltage recovery.
- Input function: Free assignment of the switching, dimming, blind and valuator functions.
- Locking object.
- Behaviour when bus voltage recovers.
- Temperature, Brightness, Color temperature, Switching: two switch objects per input.
- Command on rising/falling edge (ON, OFF, TOGGLE, no reaction).
- Dimming: Single surface and dual-surface operation.
- Time between dimming and switching and dim step values.
- Telegram repetition and send stop telegram.
- Blinds: Command on rising edge (none, UP, DOWN, TOGGLE), Operation concept (Step - Move - Step or Move - Step).
- Time between short and long operation.
- Slat adjustment time.
- Valuator and Scene ext. input: Edge (push-button as make contact, push-button as break contact, switch) and value on edge.
- Value adjustment via long push-button action for valuator.
- Scene ext. unit with memory function.
- Logic module: Logic operation, Converter, Blocking element, Comparator, Limit value
SCHNEIDER ELECTRIC MTN6215-0410S - SpaceLogic 4 Zoll Mini, KNX-Touch-Panel, TFT-LCD, 480 x 480 px
356.21 EUR
SpaceLogic KNX 4 Zoll Mini Touch für Smart HomeSchneider Electric SpaceLogic KNX 4 Zoll Mini Touch ist eine programmierbare KNX-Steuereinheit mit einem 4 Zoll großen Display. Alle Funktionen werden auf einem berührungsempfindlichen Bildschirm angezeigt und mit einfachen Fingerbewegungen aufgerufen. Die Steuereinheit integriert HLK-, Beleuchtungs- und Rollladensteuerung in einem Gerät. Mit dem KNX Touch Panel SpaceLogic KNX 4 Zoll Mini kann die Luftqualität angezeigt und die Musikwiedergabe gesteuert werden. Icons und der Bildschirmschoner sind konfigurierbar und können über die USB-Schnittstelle aktualisiert werden. Allgemeine Eigenschaften wie das Busverhalten nach Spannungswiederkehr, die Display-Benutzeroberfläche, die Näherungsfunktion und der Temperaturmessparameter können einfach eingestellt werden. Die Mini Touch Steuereinheit kann Telegramme auf den Bus senden, wie z.B. Schalttelegramm, Szenentelegramm, Helligkeits-/RGB-/Farbtemperatur-Dimmtelegramm, Vorhang-/Jalousietelegramm und Jalousiepositions- und Lamellentelegramm. Das Gerät verfügt außerdem über die Funktionen Lüftungsanlage, FCU, Fußbodenheizung und Klimagerätesteuerung. Die Displayauflösung des Touchpanels beträgt 480 x 480 Pixel mit 16.700.000 Displayfarben. Der Prozessor ist ein ARM Cortex-A7 mit 64 MB Flash und 128 MB RAM. Seine Betriebsspannung beträgt 24 V DC. Die Belastbarkeit des Touchpanels beträgt 2 W. Diese Steuereinheit ist schwarz und ermöglicht eine bündige Montage. Die Reichweite des Näherungssensors beträgt ca. 12 cm. Die Betriebstemperatur liegt zwischen -5°C und +45°C. Das KNX Touch Panel erreicht die Schutzart IP20.
Vorteile SpaceLogic 4 Zoll Mini KNX-Touch-Panel:
- Bis zu 9 Screens, bis zu 6 Funktionen pro Screen.
- Anpassbare Icons (USB), individuell anpassbares Hintergrundbild.
- Passwort (Bildschirm und Einstellungen).
- Tag/Nacht-Betrieb, Näherungssensor, Temperatursensor.
- 3 verschiedene Farben (Weiß/Schwarz/Blau).
- Displaygröße: 3,95'' TFT LCD, Auflösung: 480x480 Pixe.
- Bündig montiert (CE60).
- 21 - 32 V DC (zusätzliche Stromversorgung).
- RTC Back power > 48 Stunden, Bip-Sound-Bestätigung.
- Stand-Alone Gerät (keine zusätzlichen Komponenten bzw. Rahmen erforderlich).
SCHNEIDER ELECTRIC SE LSS900100 - eConfigure KNX Lite graphical commissioning tool
700.15 EUR
eConfigure KNX Lite software for simplified KNX configuration in residential and commercial buildings. Fast and convenient planning and commissioning via the graphical user interface. Up to 250 KNX devices from Merten and Schneider Electric can be integrated into a single project.
SCHNEIDER ELECTRIC SE MTN684032 - KNX power supply REG-K/320 mA, light grey
169.23 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
KNX power supply
- For generating the bus voltage for a line with up to 64 bus devices.
- With integrated choke to decouple the power supply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line.
- For installation on DIN rails TH35 according to EN 60715.
- The bus is connected using a bus connecting terminal.
Contents:
With bus connecting terminal and cable cover.
SCHNEIDER ELECTRIC SE LSS100100 - Wiser for KNX homeLYnk Logic Controller
1505.49 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
Logic Controller
- Wiser for KNX is the perfect choice for single or multi-family houses or residential complexes and integrates a wide range of control functions to improve comfort, security and flexibility for the residents and owners.
- The system is future proof, interoperable, and scalable.
- With its integrated visualization, the installation’s energy consumption can be displayed and monitored through PC’s and mobile devices.
- The stored data can also be exported for further analysis (e.g. as .csv).
Features:
- Freely programmable logic controller with integrated web server
- Configurable visualization alternatives: Custom Visualization or Touch (through Widgets) for PC and mobile devices
- Marketplace with applications to download and extend the controller’s functionality
- Sonos and Revox sound systems integration
- Somfy and Danfoss Integration
- Philips Hue support
- IFTTT support
- Multi-protocol gateway between KNX (TP / IP) and Modbus RTU / TCP + BACnet IP
- HTTP / HTTPS / NTP / FTP servers
- Integration of IP cameras
- Data logger with trend display and export function
- Modbus (10 devices)
- Integrated USB port (additional memory, EnOcean & GSM dongles)
- Freely programmable scheduler
- IP router
- Scenes module
- E-mail and SMS
- Easy visualization configuration through eConfigure
SCHNEIDER ELECTRIC SE MTN6725-0003 - KNX DALI Gateway Basic REG-K/1/16/64
362.31 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
KNX DALI Gateway Basic
- The KNX DALI Gateway connects the KNX bus to 1 DALI output.
- The gateway is a category I DALI control device with an integrated DALI power supply for the ECGs.
- The device is a Single-Master Application Controller according to EN 62386 ed/1 and ed/2.
- Starting with firmware version 0.2.6 the gateway is certified according to EN 62386-101/-103 ed2 and is DALI-2.0 single master certified.
- It is able to control DALI ECGs ed/1 and ed/2 -also mixed- but according to single-master controller it cannot support DALI-2 sensors like movement- and presence detectors, switches etc.
- It supports the switching and dimming of up to 64 ECGs in 16 groups and the control of more than 16 scenes.
- Different colour commands (e.g. white tone control, RGB, XY and HSV) can be interpreted by KNX push-buttons, for example, and DALI DT8 lights can be activated accordingly.
- The operating hours meter logs the operating hours for the groups.
- Error messages from individual ECGs and groups can be transmitted via the KNX and visualised.
- A colour control module allows up to 16 time switch functions for brightness and colour on a weekly basis, provided that the device is connected to a time update system.
- The up to 16 time programmes with up to 300 commands per DALI output can be enabled or disabled using KNX objects.
- DALI commissioning and configuration, group allocation and scene set-up can be carried out using the ETS application and an ETS app (DCA).
- With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715.
- The bus is connected using a bus connecting terminal.
KNX software functions:
- Switching, dimming, value and colour objects per group, plus switching, value and colour objects for broadcast control.
- Staircase timer function with dimmed lights, also for advance warning and normal, continuous, night and panic modes.
- Differentiated error analysis per EB and group.
- Scenes with brightness and colour.
- Energy saving thanks to reduction in EB standby losses due to additional KNX switching actuator.
- The colour control module can be used to control brightnesses and colours based on a weekly time switch. (Requirement: weekday and time synchronisation)
- Any time interval possible, up to 90 s.
- The up to 16 time programmes can be controlled using KNX objects.
- Operating hours can be recorded...
SCHNEIDER ELECTRIC SE MTN632519 - KNX ARGUS 220° motion detector, polar white
223.34 EUR
KNX ARGUS 220. KNX motion detector for outdoor use. 220° area monitoring for large house fronts and house sections. With integrated bus coupler. The physical address is programmed with a magnet. 360° short-distance range (approx. 4 m radius). Large wiring space and plug system. Loop formation is possible. LED function display for fast alignment at the installation location. The controls are protected under the easily accessible cover plate. Flexibly adjustable sensor head. Individual lens areas can be hidden. Can be mounted on walls and ceilings without additional accessories. Can be mounted on internal/external corners and standpipes with mounting brackets. KNX software functions: Five motion blocks: up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. Normal operation, master, slave, safety pause, deactivation function. Sensitivity, brightness and staircase lighting time can be set via the ETS or the potentiometer. Self-adjusting staircase lighting time. Detection angle: 220°. Range: max. 16 m. Number of steps: 7. Number of zones: 112 with 448 switching segments.
SCHNEIDER ELECTRIC SE MTN693003 - Power supply REG, 24 V DC / 0.4 A, light grey
98.22 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
Power supply REG
- Power supply for 24 V binary inputs.
- For installation onto DIN rails EN 50022.
- With integrated overload and short-circuit protection.
- For installation on DIN rails TH35 according to EN 60715.
SCHNEIDER ELECTRIC SE MTN663529 - Power supply REG, AC 24 V/1 A
76.2 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
Power supply
- Power supply for 24 V binary inputs, weather station REG-K/4-gang, analogue input module REG-K/4-gang, rain sensor, wind sensor with 0 - 10 V interface and heating, KNX/IP router REG-K.
- With fuse.
- For installation on DIN rails TH35 according to EN 60715.
Contents:
With spare fuse.
SCHNEIDER ELECTRIC SE MTN647593 - Switch actuator REG-K/4x230/16 with manual mode, light grey
236.26 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
Switch actuator with manual mode
- For independent switching of four loads via make contacts.
- With integrated bus coupler 2 and screw terminals.
- The 230 V switch output can be operated with a manual switch.
- A green LED indicates readiness for operation after the application has been loaded.
- For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal.
KNX software functions:
Operation as break or make contact, delay functions for each channel, staircase lighting function with/without manual OFF function, cut-out warning for staircase lighting function, blocking and additional logic operation or priority control, scenes, status feedback function per channel, central function, comprehensive parameterisation for bus voltage failure and recovery, parameterisable download behaviour.
Contents:
With bus connecting terminal and cable cover.
SCHNEIDER ELECTRIC SE LSS100200 - spaceLYnk Logic Controller
1490.81 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
spaceLYnk
spaceLYnk is the ideal solution for commercial buildings. Thanks to its 2,000 BACnet data points and 31 Modbus devices, spaceLYnk can be effortlessly integrated into complete energy and building management systems.
SpaceLYnk can be used:
- As a KNX logic controller for the creation of complex building automation solutions
- As a building automation solution for small and medium-sized buildings with complete control including LRC (lighting and room control (KNX)) and measurement technology (Modbus devices, Smartlink RTU and IP)
- As a Cross-sector communication for large buildings with complete control via SBO EcoStruXure™ (BMS from Schneider Electric).
- As a gateway for communication between different products and protocols.
- As a data storage device, for analyzing and exporting the data (e.g. as .csv).
- As a user interface for the display and control of relevant information on PCs and mobile devices.
Features:
- Freely programmable logic controller with integrated web server
- WEB SCADA visualization for PC and mobile devices
- Marketplace with applications to download and extend the controller’s functionality
- IFTT support
- Multi-protocol gateway between KNX (TP / IP) and Modbus RTU / TCP + BACnet IP
- HTTP / HTTPS / NTP / FTP servers
- BACnet server (2000 data points)
- Modbus (31 devices)
- Login visualization (>50 users)
- User management tool to define user access and visibility
- Predefined Modbus templates
- BACnet certified ''BACnet Application Specific Controller (B-ASC)”
- Integration of IP cameras
- Simple function block programming
- Integrated USB port (additional memory, EnOcean & GSM dongles)
- Freely programmable scheduler
- IP router
- Scenes module
- E-mail and SMS
- Easy visualization configuration through eConfigure
- KNX IP Secure compatibility
SCHNEIDER ELECTRIC SE MTN649804 - Blind actuator REG-K/4x/10 with manual mode, light grey
229.9 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
Blind actuator with manual mode
- For independent control of 4 blind/roller shutter drives.
- The functions of the blind channels is freely configurable.
- All blind outputs can be operated manually using push-button operation.
- Channel status display via LEDs.
- A green LED indicates readiness for operation.
- With integrated bus coupler.
- For installation on DIN rails TH35 according to EN 60715.
- The bus is connected using a bus connecting terminal.
KNX software functions:
Blind functions:
- Blind type.
- Running time.
- Idle time.
- Step interval.
- Differentiated disable functions and weather alarms.
- 8-bit positioning for height and slat.
- Scenes.
- Manual/automatic mode.
- Differentiated status and status feedback functions.
Contents:
With bus connecting terminal and cable cover.
SCHNEIDER ELECTRIC SE MTN644492 - Binary input REG-K/4x10, light grey
164.89 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
Binary input
- For connecting four conventional push-buttons or floating contacts to the KNX.
- Internally generates a signal voltage SELV, electrically isolated from the bus.
- With integrated bus coupler and plug-in screw terminals.
- The input voltage level is displayed at each input with a yellow LED.
- A green LED indicates that the device is ready for operation once the application has been loaded.
- For installation on DIN rails TH35 according to EN 60715.
- The bus is connected using a bus connecting terminal.
KNX software functions:
- Switching, dimming or blind control via 1 or 2 inputs.
- Positioning values for blind control (8-bit).
- Pulse edges with 1-, 2-, 4-, or 8-bit telegrams.
- Differentiation between short/long operation.
- Initialisation telegram.
- Cyclical sending.
- Pulse edges with 2-byte telegrams.
- 8-bit linear regulator.
- Disable function.
- Break/make contact.
- Debounce time.
Contents:
With bus connecting terminal and cable cover.
SCHNEIDER ELECTRIC SE MTN644992 - Binary input REG-K/4x230, light grey
171.4 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
Binary input
- For connecting four conventional devices with AC 230 V outputs to the KNX.
- With integrated bus coupler and plug-in screw terminals.
- The input voltage level is displayed at each input with a yellow LED.
- A green LED indicates that the device is ready for operation once the application has been loaded.
- For installation on DIN rails TH35 according to EN 60715.
- The bus is connected using a bus connecting terminal.
KNX software functions:
- Switching, dimming or blind control via 1 or 2 inputs.
- Positioning values for blind control (8-bit).
- Pulse edges with 1-, 2-, 4-, or 8-bit telegrams.
- Differentiation between short/long operation.
- Initialisation telegram.
- Cyclical sending.
- Pulse edges with 2-byte telegrams.
- 8-bit linear regulator.
- Disable function.
- Break/make contact.
- Debounce time.
Contents:
With bus connecting terminal and cable cover.
SCHNEIDER ELECTRIC SE MTN644692 - Binary input REG-K/8x230, light grey
208.2 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
Binary input
- For connecting eight conventional devices with AC 230 V outputs to the KNX.
- With integrated bus coupler and plug-in screw terminals.
- The input voltage level is displayed at each input with a yellow LED.
- A green LED indicates that the device is ready for operation once the application has been loaded.
- For installation on DIN rails TH35 according to EN 60715.
- The bus is connected using a bus connecting terminal.
KNX software functions:
- Switching, dimming or blind control via 1 or 2 inputs.
- Positioning values for blind control (8-bit).
- Pulse edges with 1-, 2-, 4-, or 8-bit telegrams.
- Differentiation between short/long operation.
- Initialisation telegram.
- Cyclical sending.
- Pulse edges with 2-byte telegrams.
- 8-bit linear regulator.
- Disable function.
- Break/make contact.
- Debounce time.
Contents:
With bus connecting terminal and cable cover.
SCHNEIDER ELECTRIC SE MTN644592 - Binary input REG-K/8x10, light grey
216.31 EUR
KNX Home AutomationKNX is the intelligent building control system for all areas in which your customers live and work. From single-family houses to office complexes, the comprehensive portfolio of KNX solutions from Schneider Electric enables you to achieve flexible, energy-efficient, comfortable and safe solutions that are easy to plan, install and operate.
Binary input
- For connecting four conventional push-buttons or floating contacts to the KNX.
- Internally generates a signal voltage SELV, electrically isolated from the bus.
- With integrated bus coupler and plug-in screw terminals.
- The input voltage level is displayed at each input with a yellow LED.
- A green LED indicates that the device is ready for operation once the application has been loaded.
- For installation on DIN rails TH35 according to EN 60715.
- The bus is connected using a bus connecting terminal.
KNX software functions:
- Switching, dimming or blind control via 1 or 2 inputs.
- Positioning values for blind control (8-bit).
- Pulse edges with 1-, 2-, 4-, or 8-bit telegrams.
- Differentiation between short/long operation.
- Initialisation telegram.
- Cyclical sending.
- Pulse edges with 2-byte telegrams.
- 8-bit linear regulator.
- Disable function.
- Break/make contact.
- Debounce time.
Contents:
With bus connecting terminal and cable cover.
HAGER TYFS121 - KNX/IP Router Secure, REG 1 TE
273.26 EUR
Der KNX/IP-Router Secure mit integriertem Busankoppler wird als Linien-/Bereichskoppler eingesetzt und verbindet KNX-Buslinien miteinander über Datennetzwerke als schneller Backbone. Das Gerät kann zudem als Programmierschnittstelle dienen, um einen oder mehrere PCs mit dem KNX Bus zu verbinden (z.B. für ETS-Programmierung). Die Kommunikation zwischen den KNX/IP-Routern ist gesichert. Neben KNXnet/IP Routing unterstützt das Gerät auch KNXnet/IP Tunneling wobei bis zu 8 gesicherte Verbindungen gleichzeitig benutzt werden können. Die IP-Adresse kann über einen DHCP-Server bzw. durch manuelle Konfiguration (ETS) zugewiesen werden. Der KNX/IP Router besitzt eine erweiterte Filtertabelle für die Hauptgruppen 0 bis 31 und kann bis zu 150 Telegramme zwischenspeichern. Eine externe Betriebsspannung ist nicht notwendig.Funktionen: Programmiertaste und rote Programmier-LED, RJ45-Anschluss für Ethernet/IP-Netzwerke und Busanschluss über Anschlussklemme.
SCHNEIDER ELECTRIC A9L16441 - Surge arrester type 3, iPRE, RJ45 Ethernet, Cat. 5/6
141.84 EUR
Acti9 iPRE surge arrester. Type 3 for RJ45 Ethernet cabling systems, Category 5 and 6, for protecting routers or switches. Dimensions: 106 x 25 x 45 mm, weight: 105 grams. Degree of protection IP 20 corresponds to IEC 60529, ambient temperature during operation: -40 to +70°C. IEC 61643-21 standard. Grey colour, aluminium material.