PROCAR BST 27 - Motorcycle socket with snap-on cover
32.28 EUR
Access the complete sheet with information, compare prices and identify the features of PRODUCTNAME, available at the price of PRICE CURRENCY; it inserts into the CATEGORY NAME; the product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
Motorcycle socket with snap-on cover 12 V / 10 A
For connecting battery chargers, navigation systems, PDAs and other consumers. Suitable for universal plugs and safety plugs. Weather-resistant, water-proof and pre-assembled with 20-cm cable. Internal diameter: 21 mm.
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Motorcycle socket with snap-on cover 12 V / 10 A
For connecting battery chargers, navigation systems, PDAs and other consumers. Suitable for universal plugs and safety plugs. Weather-resistant, water-proof and pre-assembled with 20-cm cable. Internal diameter: 21 mm.
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
PROCAR BST 67327600 - KFZ - Surface-mounted power USB double socket, with cover, round
30.93 EUR
This USB-A built-in charger from ProCar is a reliable solution for permanent installation in vehicles with 12-24 V on-board voltage. The integrated voltage converter ensures a stable output voltage of 5 V DC.
- Input voltage: 8-34 V DC
- Output: 2 x USB-A, max. 2.5 A per port (total 25 W)
- Safety: Protection against reverse polarity, overload, overtemperature, overvoltage and short circuit
- Mounting: Fastening with screws
- Connection: Pre-assembled cable (approx. 15 cm, 2 x 0.5 mm²)
- Dimensions: Ø 59 mm x height 24 mm
- E1 approval for safe vehicle use
Ideal for installation in cars, trucks, motorhomes or boats.
PROCAR BST 23 - Automobile power socket, up to 20 A with cover
16.31 EUR
Automobile plug connectorPower socket with screw thread
For operating supplementary devices in cars, boats and caravans. Load capacity 20 A at a cable cross-section of 2.5 mm², 15 A at a cable cross-section of 1.5 mm². Internal Ø 21 mm, installation hole 27.8 mm. Secured with hexagon nuts.
PROCAR BST 67323500 - Car USB mounted charging socket, 2x 2500 mA
31.86 EUR
Mounted socket with double USB power socket 12 - 24 V DC /5 V DC, 5000 mA (2x 2500 mA)
With integrated voltage transformer for charging and powering smartphones, navigation devices, digital cameras, mobile phones, MP3 players, cameras, tablets and other electronic devices that can be charged via USB.
Fitted using two screws (included).
Cable connection (approx. 150 mm) pre-assembled,
Dimensions (L x W x H): 85 mm x 35 mm x 33 mm.
PROCAR BST 67322500 - KFZ - USB charging socket, 2-way, 12/24V, 5V/2.5A, built-in
32.79 EUR
With integrated voltage converter, for charging and operating smartphones, navigation devices, digital cameras, mobile phones, MP3 players, photo cameras, tablets and other electronic devices that need to be charged via USB.- Input voltage: 12/24 V DC
- Output voltage: 5 V DC
- Output current: 5 A (2x 2.5A)
- USB charging socket: 2x
- Fixing with hexagon nut
- Cable connection approx. 150 mm pre-assembled
- Screws included in delivery
- can be mounted with or without mounting plate
PAULMANN PLM 94975 - URail rail spotlight socket, E27, max. 20 W, dimmable, black
30.66 EUR
URail rail spotlight socket single spotlight E27 max. 20 W dimmable 230 V blackThe URail Spot Ceiling Socket in black is ideal when combined with decorative lighting such as mirror and filament bulbs. The internal E27 socket and rail mount are hidden behind a metal cover.
- URail system light, includes mounting instructions
- Dimmable
- Can also be controlled via app with SmartHome bulbs
- Don't forget to order compatible bulbs too!
PAULMANN PLM 94974 - URail rail spotlight socket, E27, max. 20 W, dimmable, white
30.66 EUR
URail rail spotlight socket single spotlight E27 max. 20 W dimmable 230 V whiteThe URail Spot Ceiling Socket in white is ideal when combined with decorative lighting such as mirror and filament bulbs. The internal E27 socket and rail mount are hidden behind a metal cover.
- URail system light, includes mounting instructions
- Dimmable
- Can also be controlled via app with SmartHome bulbs
- Don't forget to order compatible bulbs too!
PAULMANN PLM 94973 - URail rail spotlight socket, E27, max. 20 W, dimmable, chrome
30.66 EUR
URail rail spotlight socket single spotlight E27 max. 20 W dimmable 230 V matt chromeThe URail Spot Ceiling Socket in matt chrome is ideal when combined with decorative lighting such as mirror and filament bulbs. The internal E27 socket and rail mount are hidden behind a metal cover.
- URail system light, includes mounting instructions
- Dimmable
- Can also be controlled via app with SmartHome bulbs
- Don't forget to order compatible bulbs too!
PROCAR BST 3 - Standard automobile plug connector, up to 15 A, screw contacts
14.86 EUR
Automobile plug connectorStandard plug, suitable
for standard sockets
in accordance with DIN ISO 4165.
Screwed contacts.
15 A / 6-24 V.
FREI KRAD SD14 - Motorcycle - DIN socket, 4165, 12 V, 0.8 m
22.3 EUR
Instead of the standard stuffing cover, this compact socket has a high-quality spring-loaded hinged cover, known from the series on-board sockets of vehicle manufacturers. The socket in insulating plastic is equipped with high-quality cables and removable cable contacts.
The scope of delivery includes a fuse holder with fuse (7.5 A) that can be flexibly installed and a mounting bracket for attachment to the pipe linkage.
• with spring hinged lid
• compact design
• with mounting bracket
• hole diameter: 18 mm
• original equipment quality
PROCAR BST 93 D 3A - KFZ - USB charging socket, 8-34V, 5V/3A, built-in, with cover
28.5 EUR
This USB socket with integrated voltage converter can be used to charge smartphones, navigation devices, digital cameras, mobile phones, MP3 players, photo cameras, tablets and other electronic devices that require a high charging current.Technical data:
- E1 Approval
- Input voltage: 8 - 34 Volt
- Output current: max. 3 A
- Power consumption: < 5 mA
- Cable length: 15 cm
- Cable cross-section: 0,5 mm²
- Panel thickness with threaded sleeve: 2 - 8 mm
- Mounting hole: 27.8 mm +/- 0.1 mm
- Fixing with hexagon nut
PROCAR BST 1 - Standard automobile plug connector, up to 8 A, solder version
12.12 EUR
Automobile plug connectorStandard plug, suitable
for standard sockets
in accordance with DIN ISO 4165.
8 A / 6-24 V.
PROCAR BST 68305000 - Truck voltage transformer, 24V/12V, 72W
81.68 EUR
Enables direct connection of 12 V loads in trucks with 24 V on-board voltage. The voltage converter is simply plugged in between the truck socket and the consumer and is ideal for operating a portable navigation device, CD player, television set, etc. The voltage converter can be used as a power supply or as a power supply.- Cigarette lighter plug to cigarette lighter socket
- Input voltage: 24 V DC
- Output voltage: 12 V DC
- Output current: max. 6 A
- Output power: max. 72 W (120 W short term)
- Efficiency: 88%.
- Quiescent current: <30 mA
• interne Sicherung gegen Überspannung, Spannungsspitzen und Überhitzung
General information on car plugs/sockets
- Standard plug/socket (DIN 4165) = Ø12 mm
- Cigarette lighter plug/socket = Ø21 mm
- Universal plug (with removable red protective cap) = Standard plug (DIN 4165) Ø12 mm (without red cap) and cigarette lighter plug Ø21 mm (with red cap)
PROCAR BST 67607100 - KFZ - standard socket outlet, 12-24V, 16A, flush mounting, with
14.91 EUR
This standard plug socket may be used to operate devices in cars, boats and caravans up to 16 A. - for standard plug (DIN 4165) and universal plug
- on-board voltage: 12-24 V
- Load capacity: up to 16 A
- suitable for thick-walled material
- with protective cover (protection against dust and splash water)
- with T-flat plug 6.3 mm
- Fastening with hexagon nut
- Installation opening: Ø18 mm
- TÜV-tested
General information about car plugs/sockets
- Standard plug/socket (DIN 4165) = Ø12 mm
- Cigarette lighter plug/socket = Ø21 mm
- Universal plug (with removable red protective cap) = Standard plug (DIN 4165) Ø12 mm (without red cap) and cigarette lighter plug Ø21 mm (with red cap)
PROCAR BST 67327500 - Car - Surface-mounted power USB double socket, round, incl. LED
31.24 EUR
This USB-A built-in charger from ProCar is ideal for permanent installation in vehicles with 12-24 V on-board voltage. The integrated voltage converter ensures a stable output voltage of 5 V DC.
Specifications
- Input voltage: 8-34 V DC
- Output: 2 x USB-A, max. 2.5 A per port (total 25 W)
- Safety: Protection against reverse polarity, overload, overtemperature, overvoltage and short circuit
- Mounting: Fastening with screws
- Additional functions: Blue control LED for voltage display
- Connection: Pre-assembled cable (approx. 15 cm, 2 x 0.5 mm²)
- Dimensions: Ø 59 mm x height 24 mm
- E1 approval for safe vehicle use
Note
Ideal for use in cars, trucks, motorhomes or boats.
PROCAR BST 24 - KFZ - standard socket outlet, 12/24V, 16A, flush mounting, with
19.24 EUR
This standard plug socket may be used to operate devices in cars, boats and caravans up to 16 A. - for standard plug (DIN 4165)
- on-board voltage: 12/24 V
- Load capacity: up to 16 A
- suitable for thick-walled material
- with snap lid (protection against dust and splash water)
- with flat plug 6,3 mm
- Fastening with hexagon nut
- Installation opening: Ø18 mm
General information about car plugs/sockets
- Standard plug/socket (DIN 4165) = Ø12 mm
- Cigarette lighter plug/socket = Ø21 mm
- Universal plug (with removable red protective cap) = Standard plug (DIN 4165) Ø12 mm (without red cap) and cigarette lighter plug Ø21 mm (with red cap)
FREI KRAD SD22 - Motorcycle - DIN socket, 4165 - without accessories
18.06 EUR
This is a high quality built-in socket with spring hinged cover without any other accessories.• with spring hinged cover
• smallest design
• original equipment quality
• hole diameter 18 mm
PROCAR BST 57621000 - KFZ - standard socket outlet, 12/24V, 16A
14.07 EUR
For setting up individual extensions for the power supply of electrical appliances and lights for cars, boats and caravans.- for standard plug (DIN 4165) and universal plug
- on-board voltage: 12-24 V
- Load capacity: up to 16 A
General information about car plugs/sockets
- Standard plug/socket (DIN 4165) = Ø12 mm
- Cigarette lighter plug/socket = Ø21 mm
- Universal plug (with removable red protective cap) = Standard plug (DIN 4165) Ø12 mm (without red cap) and cigarette lighter plug Ø21 mm (with red cap)
BLULAXA 48693 - LED filament lamp A60 E27 7 W 810 lm WW opal
14.96 EUR
The 7-watt bulb-shaped LED filament lamp shines in a warm white light, which is distributed evenly with no glare thanks to the opal glass cover. As with conventional light bulbs, these LED-powered filament lamps are also equipped with an E27 socket, which greatly broadens their areas of application. This makes it a perfect like-for-like replacement. The LED version also impresses with its long service life and very high switching resistance. Product benefits:
- Economical twin pack
- Long life of up to 15,000 hours
- Number of switching cycles is 50,000 (high switching resistance)
- Immediate full luminous flux (< 0.5 s)
- Large beam angle for illuminating large areas
- Opal glass cover for uniform illumination
- Special design
- Low heat generation
- Equivalent to 60 watts
BLULAXA 49019 - LED filament lamp A60 E27 4.5 W 470 lm WW opal
12.74 EUR
This 4.5-watt, bulb-shaped LED lamp shines in a warm white light, which is evenly distributed thanks to the matt opal glass cover and ensures homogeneous illumination. As with conventional light bulbs, the LED filament lamp is also equipped with a standard E27 socket, which makes it easy to replace directly. In addition, the illuminant impresses users with its high switching resistance and long service life. Product benefits:
- Long life of up to 15,000 hours
- Number of switching cycles is 50,000 (high switching resistance)
- Immediate full luminous flux (< 0.5 s)
- Large beam angle for illuminating large areas
- Opal glass cover for uniform illumination
- Special design
- Low heat generation
- Equivalent to 40 watts
Note: not suitable for electronic switches, motion detectors or stairwell switches.
BLULAXA 49088 - LED filament lamp A60 E27 8 W 1055 lm WW opal
14.55 EUR
The 8-watt, bulb-shaped LED filament lamp shines in a warm white light, which is distributed evenly and without glare thanks to the opal glass cover. As with conventional light bulbs, this LED-powered filament lamp is equipped with an E27 socket, which greatly broadens its areas of application. This makes it a perfect like-for-like replacement. The LED version also impresses with its long service life and very high switching resistance. Product benefits:
- Long life of up to 15,000 hours
- Number of switching cycles is 50,000 (high switching resistance)
- Immediate full luminous flux (< 0.5 s)
- Large beam angle for illuminating large areas
- Opal glass cover for uniform illumination
- Low heat generation
- Equivalent to 60 watts
Note: not suitable for electronic switches, motion detectors or stairwell switches.
BLULAXA 48628 - LED filament lamp A60 E27 7 W 810 lm NW opal
13.62 EUR
The 7-watt, bulb-shaped LED filament lamp shines in a neutral white light, which is distributed evenly and without glare thanks to the opal glass cover. As with conventional light bulbs, this LED-powered filament lamp is equipped with an E27 socket, which greatly expands its areas of application. This makes it a perfect like-for-like replacement. The LED version also impresses with its long service life and very high switching resistance. Product benefits:
- Long life of up to 15,000 hours
- Number of switching cycles is 50,000 (high switching resistance)
- Immediate full luminous flux (< 0.5 s)
- Large beam angle for illuminating large areas
- Opal glass cover for uniform illumination
- Low heat generation
- Equivalent to 60 watts
Note: not suitable for electronic switches, motion detectors or stairwell switches.
BLULAXA 49276 - E27 LED bulb, 1 W, 59 lm, 2700 K, IP44
12.06 EUR
E27 LED MiniGlobe 1 W warm whiteThe 1-W LED MiniGlobe emits warm white light, which is evenly distributed over the surface of the matt plastic cover and ensures even illumination. Thanks to the standard E27 socket, the LED MiniGlobe is versatile and can be used wherever a suitable socket is available. In addition, the small 1-W MiniGlobe impresses with its decorative side and is ideal for decorative and party lighting. Thanks to the IP44 protection, the MiniGlobe is also suitable for outdoor use. The electronics are double insulated. However, only use outdoors with a suitable sealing ring.
Product benefits:
- Long life of up to 25,000 hours
- Number of switching cycles is 50,000 (high switching resistance)
- Immediate full luminous flux (< 0.5 s)
- High beam angle
- Matte plastic cover for even illumination
- Small design
- Low heat generation
- No harmful substances used (mercury)
BLULAXA 48875 - LED filament lamp A60, E27, 7 W, 810 lm, cold white
13.62 EUR
This 7 W bulb-shaped LED filament lamp delivers daylight white light, which is distributed evenly with no glare thanks to the opal glass cover. As with conventional light bulbs, this LED-powered filament lamp is equipped with an E27 socket, which greatly expands its areas of application.
This makes it a perfect like-for-like replacement. The LED version also impresses with its long service life and very high switching resistance.
BLULAXA 48777 - LED filament lamp A60 E27 8 W 810 lm WW DIM opal
15.02 EUR
The 8-watt, bulb-shaped, dimmable LED filament lamp shines in a warm white light, which is distributed evenly and without glare thanks to the opal glass cover. As with conventional light bulbs, this LED-powered filament lamp is equipped with an E27 socket, which greatly expands its areas of application. This makes it a perfect like-for-like replacement. The LED version also impresses with its long service life and very high switching resistance. Product benefits:
- Long life of up to 15,000 hours
- Number of switching cycles is 50,000 (high switching resistance)
- Immediate full luminous flux (< 0.5 s)
- Large beam angle for illuminating large areas
- Opal glass cover for uniform illumination
- Special design
- Low heat generation
- Equivalent to 60 watts
- Dimmable
Note: not suitable for electronic switches, motion detectors or stairwell switches.
BLULAXA 48943 - LED flex filament vintage lamp G200 E27 8.5 W 500 lm WW
34.8 EUR
The 8.5-watt 200-mm LED filament vintage globe lamp is, like the smaller version of the same name, equipped with an E27 socket, but measures 283 x 200 mm. The super warm white light emitted by the filament is additionally amplified by the gold glass cover. Great design meets modern LED technology.Product benefits:
- Long life of up to 15,000 hours
- Number of switching cycles is 50,000 (high switching resistance)
- Immediate full luminous flux (< 0.5 s)
- Large beam angle for illuminating large areas
- Unique vintage design
- Super warm white light 1800 K
- Low heat generation
- Equivalent to 40 watts
Note: not suitable for electronic switches, motion detectors or stairwell switches.
BLULAXA 49130 - LED SMD lamp A60 E27 5.5 W 470 lm NW
12.38 EUR
This variant of the 6-watt, bulb-shaped LED lamp is also provided with an E27 socket, but shines in a neutral white light. This lighting is particularly suitable for areas with low levels of daylight and is distributed evenly and without glare thanks to the matt plastic cover. It replaces conventional 40-watt bulbs and also has a long service life. Product benefits:
- Long life of up to 15,000 hours
- Number of switching cycles is 50,000 (high switching resistance)
- Immediate full luminous flux (< 0.5 s)
- Large beam angle for illuminating large areas
- Matt cover for uniform illumination
- Low heat generation
- Equivalent to 40 watts
- No harmful substances used (mercury)
BLULAXA 49132 - LED SMD lamp A60 E27 14 W 1521 lm NW
13.93 EUR
This variant of the 14-watt, bulb-shaped LED lamp is also provided with an E27 socket, but shines in a neutral white light. This lighting is particularly suitable for areas with low levels of daylight and is distributed evenly and without glare thanks to the opal plastic cover. It replaces conventional 100-watt light bulbs and also has a long service life. Product benefits:
- Long life of up to 15,000 hours
- Number of switching cycles is 50,000 (high switching resistance)
- Immediate full luminous flux (< 0.5 s)
- Large beam angle for illuminating large areas
- Opal cover for uniform illumination
- Low heat generation
- Equivalent to 100 watts
BLULAXA 49149 - LED filament vintage lamp G125 E27 7 W 645 lm WW
18.43 EUR
With a golden mirror head, this 125-mm, 7-watt LED filament vintage globe lamp is something very special. The cover provides a unique light that spreads towards the E27 socket. This illuminant is therefore ideal for ceiling or wall lighting. In addition to how it looks, the 7-watt LED globe lamp impresses users with a long service life. Product benefits:
- Long life of up to 15,000 hours
- Number of switching cycles is 50,000 (high switching resistance)
- Immediate full luminous flux (< 0.5 s)
- Unique design
- Golden mirror head cover
- Low heat generation
- Equivalent to 50 watts
- No harmful substances used (mercury)
Note: not suitable for electronic switches, motion detectors or stairwell switches.
BLULAXA 49183 - LED filament vintage lamp G125 E27 7 W 645 lm WW
18.43 EUR
The 125-mm, 7-watt E27 LED filament vintage globe lamp comes with a silver mirror head cover, which allows unique lighting. This type of LED globe lamp is particularly suitable as ceiling or wall lighting, as the light is distributed in the direction of the socket, therefore projecting a beam of light on the wall or ceiling. State-of-the-art LED technology is installed in a very special exterior. Product benefits:
- Long life of up to 15,000 hours
- Number of switching cycles is 50,000 (high switching resistance)
- Immediate full luminous flux (< 0.5 s)
- Unique design
- Silver mirror head cover
- Low heat generation
- Equivalent to 50 watts
- No harmful substances used (mercury)
Note: not suitable for electronic switches, motion detectors or stairwell switches.
FREI KRAD BS11 - Motorcycle - system board socket
27.21 EUR
System on-board socket for fixed installation.For jump starting/giving, battery charging, as well as for powering accessories with the appropriate plug.
• splash-proof with hinged cover
• short time current 90 A
• strong copper cable: 0,65 m /6 mm²
• hole diameter: 26 mm
FREI KFZ DOSE 13 - Car trailer socket, 13-pin
16.14 EUR
Socket 13-pin for connection of a 13-pin trailer plug• for 12 V on-board voltage
• contacts 13-pin
• in impact resistant plastic housing
• with snap-on cover + rubber seal
DELOCK 81301 - Easy 45 Module Cover Plate 45 x 22.5 mm 10 pieces white
25.4 EUR
This cover plate by Delock can be used to cover a free module port in a 45 mm module holder. The simple snap-in mechanism ensures that the cover is firmly in place and can be easily changed if necessary.Easy 45 connects
Easy 45 is a variable, modular system that allows components such as sockets, HDMI or USB connections to be added according to your needs. The Easy 45 modules are standardised and can be mounted in various module holder or cable ducts. Easy 45 builds the interface between electrical, network and system installation and many peripheral devices such as TV, monitors, printers, laptops and much more.
• Material: PC plastic
• Suitable for module holder Delock Easy 45
• Suitable for 45 mm cable duct with minimum depth 45 mm
• Module size: 22.5 x 45 mm
• Dimensions (LxWxH): ca. 45.0 x 22.5 x 22.0 mm
• Colour: white
System requirements
• A free module port Delock Easy 45 (22.5 x 45 mm)
Package content
• 10 x module cover plate
Package
• Zip poly bag
DELOCK 81403 - Easy 45 module cover hole Ø 19.2 mm, 5 pieces, black
20.23 EUR
This module plate by Delock provides a hole cut-out of 19.2 mm. The simple snap-in mechanism ensures that the cover is firmly in place and can be easily and toolless changed if necessary.Easy 45 connects
Easy 45 is a variable, modular system that allows components such as sockets, HDMI or USB connections to be added according to your needs. The Easy 45 modules are standardised and can be mounted in various module holder or cable ducts. Easy 45 builds the interface between electrical, network and system installation and many peripheral devices such as TV, monitors, printers, laptops and much more.
Specification
- Material: PC plastic
- Suitable for module holder Delock Easy 45
- Suitable for 45 mm cable duct with minimum depth 45 mm
- Cut-out: Ø 19.2 mm
- Module size: 45 x 45 mm
- Dimensions (LxWxH): ca. 45.0 x 45.0 x 22.0 mm
- Colour: black
System requirements
- A free module port Delock Easy 45 (45 x 45 mm)
Package content
- 5 x module plate
Package
- Zip poly bag
DELOCK 81404 - Easy 45 module cover hole Ø 24 mm, 5 pieces, black
20.23 EUR
This module plate by Delock provides a hole cut-out of 24 mm. The simple snap-in mechanism ensures that the cover is firmly in place and can be easily and toolless changed if necessary.Easy 45 connects
Easy 45 is a variable, modular system that allows components such as sockets, HDMI or USB connections to be added according to your needs. The Easy 45 modules are standardised and can be mounted in various module holder or cable ducts. Easy 45 builds the interface between electrical, network and system installation and many peripheral devices such as TV, monitors, printers, laptops and much more.
Specification
- Material: PC plastic
- Suitable for module holder Delock Easy 45
- Suitable for 45 mm cable duct with minimum depth 45 mm
- Cut-out: Ø 24 mm
- Module size: 45 x 45 mm
- Dimensions (LxWxH): ca. 45.0 x 45.0 x 22.0 mm
- Colour: black
System requirements
- A free module port Delock Easy 45 (45 x 45 mm)
Package content
- 5 x module plate
Package
- Zip poly bag
DELOCK 81394 - Easy 45 module cover hole Ø 24 mm, 5 pieces, white
20.23 EUR
This module plate by Delock provides a hole cut-out of 24 mm. The simple snap-in mechanism ensures that the cover is firmly in place and can be easily and toolless changed if necessary.Easy 45 connects
Easy 45 is a variable, modular system that allows components such as sockets, HDMI or USB connections to be added according to your needs. The Easy 45 modules are standardised and can be mounted in various module holder or cable ducts. Easy 45 builds the interface between electrical, network and system installation and many peripheral devices such as TV, monitors, printers, laptops and much more.
Specification
- Material: PC plastic
- Suitable for module holder Delock Easy 45
- Suitable for 45 mm cable duct with minimum depth 45 mm
- Cut-out: Ø 24 mm
- Module size: 45 x 45 mm
- Dimensions (LxWxH): ca. 45.0 x 45.0 x 22.0 mm
- Colour: white
System requirements
- A free module port Delock Easy 45 (45 x 45 mm)
Package content
- 5 x module plate
Package
- Zip poly bag
DELOCK 81391 - Easy 45 module cover hole Ø 30.2 mm, 5 pieces, white
20.23 EUR
This module plate by Delock provides a hole cut-out of 30.2 mm. The simple snap-in mechanism ensures that the cover is firmly in place and can be easily and toolless changed if necessary.Easy 45 connects
Easy 45 is a variable, modular system that allows components such as sockets, HDMI or USB connections to be added according to your needs. The Easy 45 modules are standardised and can be mounted in various module holder or cable ducts. Easy 45 builds the interface between electrical, network and system installation and many peripheral devices such as TV, monitors, printers, laptops and much more.
Specification
- Material: PC plastic
- Suitable for module holder Delock Easy 45
- Suitable for 45 mm cable duct with minimum depth 45 mm
- Cut-out: Ø 30.2 mm
- Module size: 45 x 45 mm
- Dimensions (LxWxH): ca. 45.0 x 45.0 x 22.0 mm
- Colour: white
System requirements
- A free module port Delock Easy 45 (45 x 45 mm)
Package content
- 5 x module plate
Package
- Zip poly bag
DELOCK 81402 - Easy 45 module cover hole Ø 30.2 mm, 5 pieces, black
20.23 EUR
This module plate by Delock provides a hole cut-out of 30.2 mm. The simple snap-in mechanism ensures that the cover is firmly in place and can be easily and toolless changed if necessary.Easy 45 connects
Easy 45 is a variable, modular system that allows components such as sockets, HDMI or USB connections to be added according to your needs. The Easy 45 modules are standardised and can be mounted in various module holder or cable ducts. Easy 45 builds the interface between electrical, network and system installation and many peripheral devices such as TV, monitors, printers, laptops and much more.
Specification
- Material: PC plastic
- Suitable for module holder Delock Easy 45
- Suitable for 45 mm cable duct with minimum depth 45 mm
- Cut-out: Ø 30.2 mm
- Module size: 45 x 45 mm
- Dimensions (LxWxH): ca. 45.0 x 45.0 x 22.0 mm
- Colour: black
System requirements
- A free module port Delock Easy 45 (45 x 45 mm)
Package content
- 5 x module plate
Package
- Zip poly bag
DELOCK 81393 - Easy 45 module cover hole Ø 19.2 mm, 5 pieces, white
17.13 EUR
This module plate by Delock provides a hole cut-out of 19.2 mm. The simple snap-in mechanism ensures that the cover is firmly in place and can be easily and toolless changed if necessary.Easy 45 connects
Easy 45 is a variable, modular system that allows components such as sockets, HDMI or USB connections to be added according to your needs. The Easy 45 modules are standardised and can be mounted in various module holder or cable ducts. Easy 45 builds the interface between electrical, network and system installation and many peripheral devices such as TV, monitors, printers, laptops and much more.
Specification
- Material: PC plastic
- Suitable for module holder Delock Easy 45
- Suitable for 45 mm cable duct with minimum depth 45 mm
- Cut-out: Ø 19.2 mm
- Module size: 45 x 45 mm
- Dimensions (LxWxH): ca. 45.0 x 45.0 x 22.0 mm
- Colour: white
System requirements
- A free module port Delock Easy 45 (45 x 45 mm)
Package content
- 5 x module plate
Package
- Zip poly bag
DELOCK 81373 - Easy 45 module cover hole 2 x M10, 45 x 22.5 mm 10 pieces
18.17 EUR
This module plate by Delock provides two hole cut-outs of 10.2 mm. The simple snap-in mechanism ensures that the module is firmly in place and can be easily removed if necessary.Easy 45 connects
Easy 45 is a variable, modular system that allows components such as sockets, HDMI or USB connections to be added according to your needs. The Easy 45 modules are standardised and can be mounted in various module holder or cable ducts. Easy 45 builds the interface between electrical, network and system installation and many peripheral devices such as TV, monitors, printers, laptops and much more.
Specification
- Material: PC plastic
- Suitable for module holder Delock Easy 45
- Suitable for 45 mm cable duct with minimum depth 45 mm
- Cut-out: 2 x Ø 10.2 mm
- Module size: 22.5 x 45 mm
- Dimensions (LxWxH): ca. 45.0 x 22.5 x 22.0 mm
- Colour: white
System requirements
- A free module port Delock Easy 45 (22.5 x 45 mm)
Package content
- 10 x module plate
Package
- Zip poly bag