Mc parts accessories
Price Comparison
The Best
APEM KAPPE 1VS SW - 1VS cap for Multimec 5 - 10.6 x 13.25 mm, square, black
10.45 EUR
"The 1VS soft-line cap series is suitable for mounting on the 5G keys and offers fantastic lighting options. In addition, the caps provide the operator with good tactile feedback.- Square design
- Rounded surface
Top Pick
QUADRIOS QUAD 22CA167 - Shrink tubing 2:1 black 100 pieces
15.38 EUR
"They expect a 100-piece premium heat-shrinkable tubing range with black heat-shrinkable tubing for a variety of applications. Whether electronics, household, workshop, field serviceOr hobby - the extensive selection means that you always have the right shrink tube section ready. Whether repair, insulation, protective coating, damage protection, protection against corrosion, As well as friction, the PE heat-shrinkable hoses are mechanically very resistant and have a high insulating effect.
Material: PE, shrinkage temperature: 70 °C ... 110 °C, operating temperature: -40 °C ... 125 °C, flammability class: VW-1, tensile strength (min.): 10.4 MPa, dielectric strength 1.5 kV/mm (30 sec.), industrial quality. All hoses comply with RoHS and REACH guidelines and are halogen-free.
Contents:
- 5 x - Ø 12 mm - Length 65 mm
- 3 x - Ø 18 mm - Length 95 mm
- 4 x - Ø 15 mm - Length 95 mm
- 25 x - Ø 3 mm - Length 32 mm
- 30 x - Ø 1.5 mm - Length 32 mm
- 8 x - Ø 9 mm - Length 65 mm
- 15 x - Ø 4.5 mm Length - 32 mm
- 10 x - Ø 6 mm Length - 65 mm
Excellent
ALBS REFL KAPP GL RT2 - Reflector covering cap, smooth, bright red
10.35 EUR
These coloured reflector covering caps, featuring either a smooth or textured surface, change the colour reproduction value of the emitted luminous flux and also protect the LED reflectors against dust and dirt.
Recommended
LUMBERG LUM 0381 - Protective cap for couplers, IP 68, with chain
15.07 EUR
Round connector with screw cap• Protective cap for couplers, IP 68
• IP 68
• With chain
For types: LUM
030..., 031..., 032..., 036..., KFR, KFV, KGR, KGV, KV, WKV
Featured
FREI SDB 1,2 SW - Heat-shrink tubing box, 20 m, black, Ø1.2 mm
13.62 EUR
Box of 20 m of black heat-shrink tubingA practical assistant in the workplace. Simply pull out and cut off the desired length.
Ø before shrinking: 1.2 mm
Ø after shrinking: 0.6 mm
Wall thickness after shrinking: 0.43 mm
Length: 20 m
Colour: black
Material: polyolefin, self-extinguishing
Shrink ratio: 2:1
Shrinks at: >90C°
Resistance after processing: -55°C to 125°C
Approvals: MIL, UL, CSA
Alternative
QUADRIOS QUAD 201711CA002 - Schrumpfschlauch Box - hohe Schrumpfrate 3:1, 100 teilig
18.06 EUR
Schrumpfschlauch Sortiment Box 100 Stück hohe Schrumpfrate 3:1, aus PE (Polyethylen)Inhalt:
30 Stück - Ø 1,5 mm - Länge - 32 mm, Schwarz
25 Stück - Ø 3 mm - Länge - 32 mm, Schwarz
15 Stück - Ø 4,5 mm - Länge - 32 mm, Schwarz
10 Stück - Ø 6 mm - Länge - 65 mm, Schwarz
8 Stück - Ø 9 mm - Länge - 65 mm, Schwarz
5 Stück - Ø 12 mm - Länge - 65 mm, Schwarz
4 Stück - Ø 15 mm - Länge - 95 mm, Schwarz
3 Stück - Ø 18 mm - Länge - 95 mm, Schwarz
QUADRIOS QUAD 201711CA003 - Schrumpfschlauch Box - hohe Schrumpfrate 3:1, 100 teilig
19.41 EUR
Schrumpfschlauch Sortiment, 100 teilig - Schrumpfrate 3:1, aus PE (Polyethylen) mit InnenkleberInhalt:
25 Stück - Ø 1,6 mm - Länge - 32 mm, Schwarz
20 Stück - Ø 2,4 mm - Länge - 32 mm, Schwarz
20 Stück - Ø 3,2 mm - Länge - 32 mm, Schwarz
15 Stück - Ø 4,8 mm - Länge - 65 mm, Schwarz
8 Stück - Ø 6,4 mm - Länge - 65 mm, Schwarz
5 Stück - Ø 7,9 mm - Länge - 65 mm, Schwarz
4 Stück - Ø 9,5 mm - Länge - 95 mm, Schwarz
3 Stück - Ø 12,7 mm - Länge - 95 mm, Schwarz
FREI SDK 24,0 SW - Heat-shrink tubing with adhesive lining, Ø24.0 mm
15.55 EUR
Double-walled heat-shrink tubing with thermoplastic adhesive liningØ before shrinking: 24.0 mm
Ø after shrinking: 6.0 mm
Wall thickness after shrinking: 2.5 mm
Length: 5 pieces, 20 cm each
Colour: black
Material: polyolefin, self-extinguishing
Shrink ratio: 04:01
Shrinks at: >110C°
Resistance after processing: -55°C to +85°C
Approval: in line with MIL
FREI SDB 25,4 SW - Heat-shrink tubing box, 5 m, black, Ø25.4 mm
16.67 EUR
Box of 5 m of black heat-shrink tubingA practical assistant in the workplace. Simply pull out and cut off the desired length.
Ø before shrinking: 25.4 mm
Ø after shrinking: 12.7 mm
Wall thickness after shrinking: 0.89 mm
Length: 5 m
Colour: black
Material: polyolefin, self-extinguishing
Shrink ratio: 2:1
Shrinks at: >90C°
Resistance after processing: -55°C to 125°C
Approvals: MIL, UL, CSA
RIA CONNECT AKL 320-04 - Box header for AKL 349, 4-pin, RM 5.0
10.66 EUR
Terminal plug-in systemStraight box header for AKL 349-xx.
4-pin
Pitch: 5.0 mm
Soldering pin and connector pin: 1 x 1 mm
Manufacturer: RIA
FESTO 158419 - Release fork, tube remover, 4/6/8/10 mm diameter
15.2 EUR
"Release fork, QSOFESTO is one of the world's leading manufacturers of high-quality technological automation solutions and pneumatic components, offering a wide range of products from precise valves and cylinders to complete system solutions.
The innovative products are characterised by high levels of reliability and durability.
Technical data:
- Size: for tube outer dia. 4 mm
- For tube outer diameter of 6 mm
- For tube outer diameter of 8 mm
- For tube outer diameter of 10 mm
- Maritime classification: See certificate
- LABS conformity: VDMA24364-B2-L
- Product weight: 13 g
- Note on materials: RoHS-compliant
We S80911 - Assortment shrinking tube T2, black/red
29.28 EUR
Assortment shrinking tube T2 280 pcs. black/red
40x 3/64, 40 mm, 1,2 > 0,6 mm
40x 1/16, 40 mm, 1,6 > 0,6 mm
40x 3/32, 40 mm, 2,4 > 1,2 mm
60x 1/18, 40 mm, 3,2 > 1,6 mm
60x 3/16, 40 mm, 4,8 > 2,4 mm
20x 1/4, 75 mm, 6,4 > 3,2 mm
20x 3/8, 70 mm, 9,5 > 4,7 mm
We S80910 - Assortment shrinking tube T2, black
29.09 EUR
Assortment shrinking tube T2280 pcs. Black
40x 3/64, 40 mm, 1,2 > 0,6 mm
40x 1/16, 40 mm, 1,6 > 0,6 mm
40x 3/32, 40 mm, 2,4 > 1,2 mm
60x 1/18, 40 mm, 3,2 > 1,6 mm
60x 3/16, 40 mm, 4,8 > 2,4 mm
20x 1/4, 75 mm, 6,4 > 3,2 mm
20x 3/8, 70 mm, 9,5 > 4,7 mm
MOZA RACING MOZA RS033 - MOZA R21 direct-drive wheel base (21 Nm) V2
809.8 EUR
"Steering wheel base for racing simulators, realistic movements delivered by 21-Nm motor, instantaneous input due to fast processor, wireless steering wheel connection, quick-release mechanism for steering wheels, housing made of high-quality aluminium in supercar look- Steering wheel base for racing simulators with realistic motion control
- 21 Nm of torque from a direct-drive motor ensure realistic driving pleasure
- Zero-latency technology for lag-free input
- Quad-core processor calculates even the most complex force feedback manoeuvres
- 262,144 resolution point encoders for extremely smooth and precise control
- Built-in sensors prevent overheating during the race
- Small size allows installation even in compact simulators
- High-quality aluminium housing with cooling fins for heat dissipation
- Supercar design for a unique appearance
Compatible MOZA products:
MOZA racing steering wheels with D1 spec quick release"
LUTRONIC LUT 9926-CPMF0 - Protective cap for cable parts, size 20
12.84 EUR
Protective cap for cable parts with locking tab, IP65, size 20
ALBS REFL KAPP GL GN - Reflector covering cap, smooth, green
10.35 EUR
These coloured reflector covering caps, featuring either a smooth or textured surface, change the colour reproduction value of the emitted luminous flux and also protect the LED reflectors against dust and dirt.
ALBS REFL KAPP GL RT1 - Reflector covering cap, smooth, dark red
10.35 EUR
These coloured reflector covering caps, featuring either a smooth or textured surface, change the colour reproduction value of the emitted luminous flux and also protect the LED reflectors against dust and dirt.
BKL 074283 - Shrink tubing inner-Ø6.4?3.2mm bw
136.15 EUR
100m HST-100H PRO high-performance polyolefin heat-shrink tubing, halogen-free, shrink ratio 2:1, -40°C/+105°C, inner Ø6.4?3.2mm, black
SCHURTER TASTER 1100 SW - Pushbutton, front mounting, 1-pin, square, black
14.39 EUR
MCS 1241.xx/NO contact 1-pin buttonFor front mounting, rectangular version. Front panel bore hole: 13 mm plus groove. A mounting kit is supplied for front panel mounting.
QUADRIOS QUAD 2107CA135 - Shrink tubing box - shrink rate 3:1, 200 pieces
29.28 EUR
This range in an advantage pack is particularly suitable for hobbyists, tradesmen, field service, service workshops, electronics technicians and laboratory equipment. You will receive a 200-piece premium shrink tube range (2 boxes each of 100 parts) in the shrinkage rate 3:1 for an application range of 1.6 to 12.7 mm in the color black, with hot-melting inner adhesive: Waterproof with correct overlap! Thanks to the large number of sizes included, the shrink tube sections can be used for insulation, protective coating of components, as anti-kink protection, protection against corrosion, as well as repair of cables and lines and much more. to be used.Technical data: Material: PE, Shrink temperature (min.): 90 °C, Shrink temperature (max.): 125 °C, Operating temperature: -40 °C to +125 °C, Tensile strength (min.): 10.4 MPa, Dielectric strength 1.5 kV (30 sec.), Industrial quality. All hoses comply with RoHS guidelines. Further technical data on the components contained are clearly printed on the inside of the lids. Scope of delivery: Two transparent assortment boxes, at least 100 heat-shrink tube sections per individual assortment.
FREI SDB 12,7 SW - Heat-shrink tubing box, 8 m, black, Ø12.7 mm
14.5 EUR
Box of 8 m of black heat-shrink tubingA practical assistant in the workplace. Simply pull out and cut off the desired length.
Ø before shrinking: 12.7 mm
Ø after shrinking: 6.4 mm
Wall thickness after shrinking: 0.65 mm
Length: 8 m
Colour: black
Material: polyolefin, self-extinguishing
Shrink ratio: 2:1
Shrinks at: >90C°
Resistance after processing: -55°C to 125°C
Approvals: MIL, UL, CSA
FREI KRAD MC925 - Motorcycle - phone holder, Qi charger, 71-90 mm
167.78 EUR
Phone holder (71 - 90 mm) / QI charging function (wireless)This is a motorcycle phone holder with wireless QI charging function (induction charging) for phones 63-72 mm wide. The high-quality aluminum holding plate with central screw ensures a secure hold of the cell phone, is vibration damped and can be rotated by 90°.
The large active charging surface with 3 integrated charging coils provides the charging power supply and a cooling function to prevent the phone from heat shutdown.
The power supply is protected against thermal overload and is provided by the device cable (0.4 m) with waterproof plug and the connection cable (1.4 m) with small DIN plug for on-board sockets. The latter can be replaced by enclosed terminal connectors to prevent battery discharge when stationary and can be clamped to a line switched via ignition.
The enclosed sturdy metal bracket with tilt joint is designed for tubular linkage or handlebars of 12 -29.5 mm diameter.
• for smart phones with width 71 - 90 mm
• large active charging surface with 3 charging coils, max. 2.5 A
• vibration damped ALU housing plate with cooling function
• incl. approx. 1.8 m cable set with DIN plug
• universal pipe holder 12 - 29,5 mm diameter, 90° rotatable
• waterproof IP68, with thermal overload and overvoltage protection
• QI registered - Made in Europe
Specifications• Operating voltage: IN: 12-48V DC / OUT 9V DC
• charging current: max. 2 A (autom.)
• current consumption: 10 - 20 mA
• Product dimensions: 118 x 92 x 59 mm
Mc parts accessories Best Products
HAZET HZ 705V - Cross wrench, wheel cross
109.8 EUR
"- For passenger cars, vans and wide-body saloons
- Fixed protection sleeves to avoid scratches in the rim hole
- Coloured protection sleeves for quick identification of key widths
- All common key widths in one
- With outer square 12,5 =1/2""
for socket inserts of the series 900 - Surface: Chromed
- DIN 3119, ISO 6788
- Made In Germany
- Output: Outer hexagon Profile
- Key width: 17 x 19 1/2 x 21 x 12,5 mm
- Dimensions
- : Outer square
- 380 mm
- Net weight (kg): 1.33 kg
- For manual operation
Marbert Body Care Bath & Body Classic Körperlotion 200 ml
12.36 EUR
Intensively nourishing, floral scented body lotion. Protects your skin from moisture and elasticity loss and gives it more tone. Dermatologically tested. Application: Apply to the entire body and massage.
"TNB UMTYRE10 - Tire for E-Scooter, 10"""
30.93 EUR
"10"" E-Scooter tyreThis E-Scooter tyre is compatible with E-Scooter 10"" wheel.
Wide and flexible, it guarantees a natural shock absorption on the roadway and a better grip, thanks to its sculpture, both on dry or wet road.
So, you ensure an optimal stability on the road.
The height of 10"" fits perfectly your E-Scooter wheels.
Consequently, the tyre keeps the characteristics and performances of your E-Scooter: natural shock absorption, speed, battery life.
This tyre requires the use of an 10"" inner tube.
Compatibility
- Universal 10""
Composition
- Synthetic rubber
GO-E CH-04-07 - Gemini flex adapter set 22 kW
118.48 EUR
Adapter set with the three adapter cables for the GO-E charger Gemini flex 22 kW including 32-A CEE red connector (three-phase). The integrated adapter detection combined with the GO-E charger Gemini flex 22 kW automatically reduces the charging current to a maximum of 16 A.The kit includes adapters for the following sockets:
CEE red 16 A (three-phase)
Charging power: max. 11 kW (400 V, 16 A)
Length: 30 cm
CEE blue 16 A (camping plug - single phase)
Charging power: max. 3.7 kW (230 V, 16 A)
Length: 30 cm
Earthed contact box (household plug - single-phase)
Charging power: max. 3.7 kW (230 V, 16 A)/2.3 kW (when reduced to 230 V, 10 A)
Length: 30 cm
Caution: Not all household sockets are designed for a charging current of 16 A. We recommend charging at 10 A with this adapter. However, charging at 10 A from a household socket is not permitted in some countries. Therefore, it is necessary to use the country setting in the GO-E charger app to use the adapter.
Note: The adapters in the set can also be used for the go-eCharger HOME+ 22 kW.
CELLY SNAPMOTORBIKEBK - Smartphone holder for motorcycle, adjustable
30.61 EUR
"The CELLY SNAPMOTORBIKE is an ultra-resistant motorcycle holder compatible with all smartphone models. SNAPMOTORBIKE's secure smartphone locking system ensures maximum stability and durability on any road.- The mounting system works with a locking mechanism. The universal plate and compatible rear pannier included in the package have a threaded hole that fits into the holder so you can easily attach your smartphone.
- The SNAPMOTORBIKE clamp with screws is used to secure the holder to motorcycle handlebars. It is compatible with all common handlebar sizes and can also be used with bicycles and e-scooters.
- The SNAPMOTORBIKE head is tilt-adjustable and can be rotated 360° to use the smartphone vertically or horizontally.
- The release system is fast: just press the red tab, then rotate the smartphone to release it.
WEICON 11001400 - Zinc spray bright grade, anti-corrosin, 400 ml
24.83 EUR
"WEICON Zinc Spray bright grade is TÜV-tested, provides all metal surfaces with a long-lasting cathodic corrosion protection and has a light coulour shade which matches fresh hot-dip galvanized coatings.The spray forms a fast-drying, adherent protective layer of microfine zinc flakes. The zinc flakes form a resistant protective layer, even under extreme weather and environmental conditions. In the salt spray test according to DIN EN ISO 9227, metal parts coated with WEICON Zinc Spray did not show any signs of corrosion after more than 550 hours.
Zinc Spray ""bright grade"" can be used for the coating of welded joints and drilled holes, as a conductive intermediate layer for spot welding and everywhere where metal must be protected against corrosion."
QUADRIOS QUAD 201711CA001 - Cordless shrink tube range, shrink rate 2:1, transparent
16.82 EUR
"- Shrink rate 2:1
- Version: Transparent
- 3 different hoses per min. 1 meters long for almost all common battery housings
- Clearly sorted, with application diagram of the possible batteries
This transparent battery shrink tube range with the most common dimensions (flat dimensions) for battery packs of RC models, for single-cell protection or any other application. The high shrinkage rate of 2:1 (shrinkage ratio: 48% ±5%) is therefore ideally suited for all conventional batteries as well as batteries and especially for creating further individual battery packs. The valuable cells are thus compactly combined, protected and still legible due to the transparent protective skin or their optical condition can be assessed.
The composition includes various flat dimensions from 23 mm to 67 mm and is made of a thin hard PVC. Each shrink tube has an ideal shrinkage behavior and can therefore adapt to the object within a very short time. Furthermore, it is so flame-retardant and has a very good resistance to mold formation. The very wide continuous operating temperature range is between -40 °C to +105 °C.
An application diagram and other technical data for the components contained are clearly printed on the inside of the lid.
The datasheet in the download area contains useful information about the range - but also important technical details about the components contained."
FREI SDK 4,0 SW - Heat-shrink tubing with adhesive lining, Ø4.0 mm
12.01 EUR
Double-walled heat-shrink tubing with thermoplastic adhesive liningØ before shrinking: 4.0 mm
Ø after shrinking: 1.0 mm
Wall thickness after shrinking: 1.0 mm
Length: 5 pieces, 20 cm each
Colour: black
Material: polyolefin, self-extinguishing
Shrink ratio: 04:01
Shrinks at: >110C°
Resistance after processing: -55°C to +85°C
Approval: in line with MIL
FREI SDK 20,0 SW - Heat-shrink tubing with adhesive lining, Ø20.0 mm
14.39 EUR
Double-walled heat-shrink tubing with thermoplastic adhesive liningØ before shrinking: 19.0 mm
Ø after shrinking: 4.8 mm
Wall thickness after shrinking: 2.3 mm
Length: 5 pieces, 20 cm each
Colour: black
Material: polyolefin, self-extinguishing
Shrink ratio: 04:01
Shrinks at: >110C°
Resistance after processing: -55°C to +85°C
Approval: in line with MIL
FREI SDK 12,0 SW - Heat-shrink tubing with adhesive lining, Ø12.0 mm
12.16 EUR
Double-walled heat-shrink tubing with thermoplastic adhesive liningØ before shrinking: 12.0 mm
Ø after shrinking: 3.0 mm
Wall thickness after shrinking: 1.7 mm
Length: 5 pieces, 20 cm each
Colour: black
Material: polyolefin, self-extinguishing
Shrink ratio: 04:01
Shrinks at: >110C°
Resistance after processing: -55°C to +85°C
Approval: in line with MIL
TRANSCEND TS DRIVEPRO 20 - Dashcam f. Motorcycles & Scooters, 1080p, 60 fps, IP68
134.5 EUR
Transcend's DrivePro 20 is designed specifically for motorcycle and scooter riders. With its simple and compact design, it offers you reliable safety on the roads. The dashcam is equipped with a STARVIS™ image sensor and offers Full HD 1080P recording at 60 frames per second for crystal-clear sharpness and night shots even in low-light conditions. The IP68 certified camera is designed for a variety of weather conditions and is water, dust, heat and shock resistant, making it ideal for outdoor shooting. Built-in Wi-Fi connectivity enables real-time transfers to mobile devices via the free DrivePro app. Thanks to its small and portable size, the dashcam is very easy to carry around. If you're a regular scooter driver or delivery driver, the DrivePro 20 is the ideal dashcam for you.
Small, portable and easy to carryTranscend's DrivePro 20 dashcam is designed specifically for motorcycles and scooters. Its compact size makes it easy to install on a helmet. After pressing the power button for 3 seconds, the DrivePro 20 is ready to accompany you!
High sensitivity image sensors from STARVIS
The 140° wide-angle lens of the DrivePro 20 is equipped with my STARVIS™ image sensor and Wide Dynamic Range (WDR) technology. This allows it to capture high-resolution images with excellent, rich colors, even in low-light conditions. With support for full HD 1080P recording at 60 frames per second, the camera captures every important detail, including license plates.
Rugged and durable designThe DrivePro 20's aluminum body is ideal for outdoor shooting as it can withstand harsh weather conditions. It is IP68 rated, providing full protection against dust and water. It also meets stringent US military standards for drop testing and shock resistance.
Wi-Fi connectivity, for easy viewing and sharing.The DrivePro 20 features Wi-Fi connectivity that, when paired with the exclusive DrivePro app, enables real-time playback and download of video footage to your mobile devices. That means easy access to video evidence for reporting incidents to law enforcement and insurance companies without removing the memory card.
Built-in rechargeable battery
The DrivePro 20 is equipped with a powerful Li-polymer battery that provides up to 2.5 hours of recording time on a single charge. Using the included microUSB to USB Type A cable, you can charge the dashcam from a computer or other device with a 5V output.
Product Features
• emergency recording
• power saving mode
• noise cancelling function
Scope of delivery
• DrivePro 20
• 32 GB microSD memory card
• microUSB to USB Type-A cable
• camera mount
• self-adhesive mounting base
• quick start guide
Universal applicationsThe versatile DrivePro 20 is compact, portable and easy to install. It is ideal for motorcycle and scooter riders,...
RIA CONNECT AKL 320-08 - Box header for AKL 349, 8-pin, RM 5.0
11.09 EUR
Terminal plug-in systemStraight box header for AKL 349-xx.
8-pin
Pitch: 5.0 mm
Soldering pin and connector pin: 1 x 1 mm
Manufacturer: RIA
APEM KAPPE 1DS SW - 1DS cap for Multimec 5 - Ø 9.6 mm, black
10.5 EUR
"The 1DS caps have a diameter of 9.6 mm and are suitable for mounting on the keys of the Multimec 5G series.- Fully coloured "
FREI SDB 1,6 SW - Heat-shrink tubing box, 20 m, black, Ø1.6 mm
13.52 EUR
Box of 20 m of black heat-shrink tubingA practical assistant in the workplace. Simply pull out and cut off the desired length.
Ø before shrinking: 1.6 mm
Ø after shrinking: 0.8 mm
Wall thickness after shrinking: 0.43 mm
Length: 20 m
Colour: black
Material: polyolefin, self-extinguishing
Shrink ratio: 2:1
Shrinks at: >90C°
Resistance after processing: -55°C to 125°C
Approvals: MIL, UL, CSA
APEM KAPPE 1US SW - 1US cap for Multimec 5 - Ø 10.6 mm, black
10.33 EUR
"The 1US soft-line cap series is suitable for mounting on the 5G keys and offers fantastic lighting options. In addition, the caps provide the operator with good tactile feedback.- Square design
- Rounded surface
LUMBERG LUM 0381-C02 - Protective cap for couplers, IP 68, without chain
12.43 EUR
Round connector with screw cap• Protective cap for couplers, IP 68
• IP 68
For types: LUM
030..., 031..., 032..., 036..., KFR, KFV, KGR, KGV, KV, WKV
FREI SDK 8,0 SW - Heat-shrink tubing with adhesive lining, Ø8.0 mm
11.93 EUR
Double-walled heat-shrink tubing with thermoplastic adhesive liningØ before shrinking: 8.0 mm
Ø after shrinking: 2.0 mm
Wall thickness after shrinking: 1.5 mm
Length: 5 pieces, 20 cm each
Colour: black
Material: polyolefin, self-extinguishing
Shrink ratio: 04:01
Shrinks at: >110C°
Resistance after processing: -55°C to +85°C
Approval: in line with MIL
FREI SDK 32,0 SW - Heat-shrink tubing with adhesive lining, Ø32.0 mm
18.74 EUR
Double-walled heat-shrink tubing with thermoplastic adhesive liningØ before shrinking: 32.0 mm
Ø after shrinking: 8.0 mm
Wall thickness after shrinking: 3.0 mm
Length: 5 pieces, 20 cm each
Colour: black
Material: polyolefin, self-extinguishing
Shrink ratio: 04:01
Shrinks at: >110C°
Resistance after processing: -55°C to +85°C
Approval: in line with MIL