PHILIPS PHI 12898015 - Infraphil E27 heating lamp, 175 W, red, PAR38

27.51 EUR
Consult the informative sheet with in-depth details, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; falls into the CATEGORY NAME; the product is marketed by SELLER NAME and produced by MANUFACTURER NAME.
Infrared lamps promote the healing process and relieve muscle pain and diseases such as rheumatism, lumbago, neuralgia and colds.
Dimensions: Total length: 136 mm, Diameter: 121 mm
EAN: 8711500128980
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Infrared lamps promote the healing process and relieve muscle pain and diseases such as rheumatism, lumbago, neuralgia and colds.
- 90 % of the energy is emitted as heat in the infrared range
- pronounced peak power at 1000 nm in the deep penetrating IR-A range
- red lamps reduce visible light emissions and glare and suppress light with wavelengths below 600 nm that would be absorbed by hemoglobin in the blood
- optimal directional control of heat radiation through integrated Fresnel lens
- special helical design ensures concentrated beam of radiation
- any focal position
Dimensions: Total length: 136 mm, Diameter: 121 mm
EAN: 8711500128980
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products

- 90 % of the energy is emitted as heat in the infrared range
- pronounced peak power at 1000 nm in the deep penetrating IR-A range
- red lamps reduce visible light emissions and glare and suppress light with wavelengths below 600 nm that would be absorbed by hemoglobin in the blood
- optimal directional control of heat radiation through integrated Fresnel lens
- special helical design ensures concentrated beam of radiation
- any focal position
Dimensions: Total length: 136 mm, Diameter: 121 mm


Replacement for a conventional 60-watt lamp
- Mercury-free
- For direct operation at 230 V
- Suitable for twilight switches
- Suitable for motion detectors
- Instant start
- Minimal luminous flux
- Minimal heat generation
- No UV or infrared radiation
- Non-dimmable
Dimensions:
Total length: 104 mm
Maximum diameter: 60 mm

Philips LED LIGHT BULB SHAPED lamp
- Output: 5.9 W
- Fitting: E27
- Clear bulb
- LED filament technology
- Light volume: 806 lm
- Dimmable
- Warm white light from 922 to 927 with 2200 to 2700 K
- Colour reproduction > Ra90
- When dimming down, the light colour of the DimTone bulb becomes warmer (with 100% light, the light colour is 2700 K (warm white) and changes to 2200 K (extra-warm white) when dimmed down to 10%). Just as with halogen lamps and standard light bulbs.

Philips LED LIGHT BULB SHAPED lamp
- Output: 4 W
- Fitting: E27
- Clear bulb
- LED filament technology
- Light volume: 470 lm
- Dimmable
- Warm white light from 922 to 927 with 2200 to 2700 K
- Colour reproduction > Ra90
- When dimming down, the light colour of the DimTone bulb becomes warmer (with 100% light, the light colour is 2700 K (warm white) and changes to 2200 K (extra-warm white) when dimmed down to 10%). Just as with halogen lamps and standard light bulbs.

MASTER glass LED lamps
Featuring a classic glass design, these MASTER filament light bulbs combine the familiar shapes of filament glass bulbs with the benefits of long-lasting LED technology.
These glass LED light bulbs are ideal for conjuring up a cosy atmosphere and provide excellent lighting quality.
MASTER glass light bulbs can be dimmed to different lumen values and colour temperatures (dimmable glass LED lamps).
They also offer significant energy savings by consuming 30% less energy than normal LED lamps.
With a service life of 25,000 hours, these dimmable glass LED lamps also reduce maintenance costs.

- Power: 2 W
- Warm white light with 2700 K
- 250-lm luminous flux, replacement for a 25-W incandescent lamp
- Colour rendering index: 80 Ra
- Efficiency: 125 lm/W
- Nominal service life: 15,000 h
- Switching assured for up to 20,000 switching cycles
- Not dimmable
- E27 fitting (pear shape)

- Power: 17.5 W
- Warm white light with 2700 K
- 2452-lm luminous flux, replacement for a 150-W incandescent lamp
- Colour rendering index: 80 Ra
- Efficiency: 140 lm/W
- Nominal service life: 15,000 h
- Switching assured for up to 20,000 switching cycles
- Not dimmable
- Fitting: E27

- Power: 13 W
- Warm white light with 2700 K
- 2000-lm luminous flux, replacement for a 120-W incandescent lamp
- Colour rendering index: 80 Ra
- Efficiency: 153 lm/W
- Nominal service life: 15,000 h
- Switching assured for up to 20,000 switching cycles
- Not dimmable
- Fitting: E27

- Power: 7.2 W
- Warm white light with 2700 K
- Luminous flux: 650 lm
- Colour rendering index: 80 Ra
- Nominal service life: 15,000 h
- Switching assured for up to 20,000 switching cycles
- Dimmable when used with many dimmers
- Fitting: E27

- Only 13-W power consumption
- 2000-lm luminous flux
- Replacement for 120-W light bulbs
- Warm white light with 2700 K
- Good colour reproduction with 80 Ra
- Nominal service life 15,000 h
- Switch-proof with up to 20,000 switching cycles
- Base: E27
- non-dimmable
- Dust- and splash-proof (IP44)
- Design: clear
- Height: 121 mm
- Diameter: 70 mm

Philips LED LIGHT BULB SHAPED lamp
- Output: 7.2 W
- Fitting: E27
- Matt surface
- LED filament technology
- Light volume: 1055 lm
- Dimmable
- Warm white light from 922 to 927 with 2200 to 2700 K
- Colour reproduction > Ra90
- When dimming down, the light colour of the DimTone bulb becomes warmer (with 100% light, the light colour is 2700 K (warm white) and changes to 2200 K (extra-warm white) when dimmed down to 10%). Just as with halogen lamps and standard light bulbs.

Philips LED LIGHT BULB SHAPED lamp
- Output: 10.5 W
- Fitting: E27
- Matt surface
- LED filament technology
- Light volume: 1521 lm
- Dimmable
- Warm white light from 922 to 927 with 2200 to 2700 K
- Colour reproduction > Ra90
- When dimming down, the light colour of the DimTone bulb becomes warmer (with 100% light, the light colour is 2700 K (warm white) and changes to 2200 K (extra-warm white) when dimmed down to 10%). Just as with halogen lamps and standard light bulbs.

Philips LED LIGHT BULB SHAPED lamp
- Output: 7.2 W
- Fitting: E27
- Clear bulb
- LED filament technology
- Light volume: 1055 lm
- Dimmable
- Warm white light from 922 to 927 with 2200 to 2700 K
- Colour reproduction > Ra90
- When dimming down, the light colour of the DimTone bulb becomes warmer (with 100% light, the light colour is 2700 K (warm white) and changes to 2200 K (extra-warm white) when dimmed down to 10%). Just as with halogen lamps and standard light bulbs.

Philips LED LIGHT BULB SHAPED lamp
- Output: 4 W
- Fitting: E27
- Matt surface
- LED filament technology
- Light volume: 470 lm
- Dimmable
- Warm white light from 922 to 927 with 2200 to 2700 K
- Colour reproduction > Ra90
- When dimming down, the light colour of the DimTone bulb becomes warmer (with 100% light, the light colour is 2700 K (warm white) and changes to 2200 K (extra-warm white) when dimmed down to 10%). Just as with halogen lamps and standard light bulbs.

Philips LED LIGHT BULB SHAPED lamp
- Output: 5.9 W
- Fitting: E27
- Matt surface
- LED filament technology
- Light volume: 806 lm
- Dimmable
- Warm white light from 922 to 927 with 2200 to 2700 K
- Colour reproduction > Ra90
- When dimming down, the light colour of the DimTone bulb becomes warmer (with 100% light, the light colour is 2700 K (warm white) and changes to 2200 K (extra-warm white) when dimmed down to 10%). Just as with halogen lamps and standard light bulbs.



Same length as 36-watt compact fluorescent bulb
The CorePro LED PLL LEDs are to be operated like conventional PL-L/TC-L compact fluorescent lamps on an electronic ballast.
This innovative LED solution allows you to achieve high energy savings compared to conventional solutions.
Please note
When switching to PLL LED, it must be ensured that the illumination levels required by regulations are maintained.
We would like to point out that the overall energy efficiency and light distribution of a system are determined by the design of the system.
PLL LEDs with electronic ballast are not suitable for operation on 230 V
Lamp should be used in dry environments and should only be used in conjunction with a light fixture approved for the application area
The CorePro PLL LED is compatible with common brand-name electronic ballasts.
Please check compatibility with the tested ballasts on the compatibility list at www.philips.de/LEDtube before installing

CorePro LED linear R7S 118 mm 14 - 100 W 830 D
CorePro R7S is a retrofit solution to replace conventional R7S twin-side socketed lamps. Their light is comparable to that of a halogen lamp thanks to the ''light all around'' concept. Within the range, you can choose dimmable products with low-dimming function, which can create a cosy atmosphere when inserted in a dimmable luminaire.


CorePro LEDlinear ND 7.5 60 W R7S 78 mm 830
CorePro R7S is a retrofit solution to replace conventional R7S twin-side socketed lamps. Their light is comparable to that of a halogen lamp thanks to the ''light all around'' concept. Within the range, you can choose dimmable products with low-dimming function, which can create a cosy atmosphere when inserted in a dimmable luminaire.

For use as general and accent lighting in private and professional applications
- R7s fitting (conventional halogen rod fitting)
- Output: 7 W
- Light colour: 830 3000 K, warm white
- Luminous flux: 950 lm
- Mercury-free
- Instant start
- Dimensions:
- Total length: 78 mm
- Maximum diameter: 28 mm

CorePro LED linear R7S 118 mm 14 - 100 W 830 D
CorePro R7S is a retrofit solution to replace conventional R7S twin-side socketed lamps. Their light is comparable to that of a halogen lamp thanks to the ''light all around'' concept. Within the range, you can choose dimmable products with low-dimming function, which can create a cosy atmosphere when inserted in a dimmable luminaire.

LED pin fitting bulb
For use as general and accent lighting in private and professional applications.
- G9 base
- Output: 1.9 W
- Light colour: 827 2700 K, extra-warm white
- Luminous flux: 220 lm
- Mercury-free
- Instant start
- Minimal luminous flux
- Minimal heat generation
- No UV or infrared radiation
- Impact-proof and vibration-proof
- Dimensions:
- Total length: 34 mm
- Maximum diameter: 14 mm

CorePro LED linear D 14-120W R7S 118 830
CorePro R7S is a retrofit solution to replace conventional R7S twin-side socketed lamps. Their light is comparable to that of a halogen lamp thanks to the ''light all around'' concept. Within the range, you can choose dimmable products with low-dimming function, which can create a cosy atmosphere when inserted in a dimmable luminaire.

CorePro LED linear D 14-120W R7S 118 840
CorePro R7S is a retrofit solution to replace conventional R7S twin-side socketed lamps. Their light is comparable to that of a halogen lamp thanks to the ''light all around'' concept. Within the range, you can choose dimmable products with low-dimming function, which can create a cosy atmosphere when inserted in a dimmable luminaire.

- Only 5.5-W power consumption
- 400 lm luminous flux
- Warm white light with 4000 K
- Excellent colour reproduction with 97 Ra
- Dimmable with many dimmers
- Beam angle: 36°
- LED service life up to 40,000 h
- Diameter: 50 mm
- Height: 54 mm

For use as general and accent lighting in private and professional applications
Features:
- Length equivalent to: 50 W halogen lamp
- Glass body like halogen lamps
- For operation at 230 V
- Suitable for twilight switches
- Suitable for motion detectors
- Dimmable
- Instant start
- Minimal heat generation
- No UV or infrared radiation
Dimensions:
Total length: 53 mm
Maximum diameter: 50 mm

- Only 3.9-W power consumption
- Luminous flux: 265 lm
- Warm white light with 2700 K
- Excellent colour reproduction with 97 Ra
- Dimmable with many dimmers
- Beam angle: 25°
- LED service life up to 40,000 h
- Diameter: 50 mm
- Height: 54 mm

- Only 5.5-W power consumption
- Luminous flux: 375 lm
- Warm white light with 3000 K
- Excellent colour reproduction with 97 Ra
- Dimmable with many dimmers
- Beam angle: 25°
- LED service life up to 40,000 h
- Diameter: 50 mm
- Height: 54 mm

CorePro R7S is a retrofit solution to replace conventional R7S double-ended linear lamps. Their light is comparable to that of a halogen lamp thanks to the ''light all around'' concept.

- Only 5.5-W power consumption
- 400 lm luminous flux
- Neutral white light with 4000 K
- Excellent colour reproduction with 97 Ra
- Dimmable with many dimmers
- Beam angle: 25°
- LED service life up to 40,000 h
- Diameter: 50 mm
- Height: 54 mm

CorePro LEDtube T8 for conventional/low-loss ballast
The Philips CorePro LEDtube family is an ideal alternative to conventional T8 fluorescent lamps on conventional/low-loss ballast.
The energy efficiency ensures immediate savings you can rely on for a long and reliable service life.
- High energy savings compared to conventional T8 fluorescent lamps.
- Minimal maintenance costs due to high service life.
- Usually pays off during the first year.
- More robust and resistant compared to conventional T8 fluorescent lamps.
- No power-on delay and optimal lighting without any flickering or humming.
- Free from mercury.

Philips LED bulb with G5 fluorescent lamp fitting
- Output: 7 W
- For 230-V mains operation
- Luminous flux: 1000 lm
- Light colour: 830 3000 K, warm white
- G5 fitting (as with T5/TL5 fluorescent lamps)
- Equivalent to the length of conventional 14-W T5/TL5 lamps

CorePro LEDtube T8 for conventional/low-loss ballast
The Philips CorePro LEDtube family is an ideal alternative to conventional T8 fluorescent lamps on conventional/low-loss ballast.
The energy efficiency ensures immediate savings you can rely on for a long and reliable service life.
- High energy savings compared to conventional T8 fluorescent lamps.
- Minimal maintenance costs due to high service life.
- Usually pays off during the first year.
- More robust and resistant compared to conventional T8 fluorescent lamps.
- No power-on delay and optimal lighting without any flickering or humming.
- Free from mercury.

The Philips MASTER LEDtube HF InstantFit EVG is an excellent alternative to conventional T8 fluorescent lamps on electronic ballasts and provides significant energy savings.
LED lamp to replace conventional fluorescent lamps for use in private and professional applications.
e.g. in corridors, shelving lights, back lights, display cases, parking garages, cold stores, stairwells.
- Instant start, no flickering when switching on
- No mercury
- LED tubes for electronic ballasts are not suitable for operation on 230 V

CorePro LEDtube T8 for conventional/low-loss ballast
The Philips CorePro LEDtube family is an ideal alternative to conventional T8 fluorescent lamps on conventional/low-loss ballast.
The energy efficiency ensures immediate savings you can rely on for a long and reliable service life.
- High energy savings compared to conventional T8 fluorescent lamps.
- Minimal maintenance costs due to high service life.
- Usually pays off during the first year.
- More robust and resistant compared to conventional T8 fluorescent lamps.
- No power-on delay and optimal lighting without any flickering or humming.
- Free from mercury.

The Philips MASTER LEDtube HF InstantFit EVG is an excellent alternative to conventional T8 fluorescent lamps on electronic ballasts and provides significant energy savings.
LED lamp to replace conventional fluorescent lamps for use in private and professional applications.
e.g. in corridors, shelving lights, back lights, display cases, parking garages, cold stores, stairwells.
- Instant start, no flickering when switching on
- No mercury
- LED tubes for electronic ballasts are not suitable for operation on 230 V