Light bulbs
The Best
Features:
- Housing made from shatter-proof polycarbonate
- Power consumption: 24 W
- Light colour 840 neutral white, 4000 K
- Socket: 2G11
- Nominal service life: 30,000 hours
- Luminous flux: 3400 lumens
- Beam angle: 160°
- No conversion required, operation with existing electronic ballast for 55-W compact fluorescent lamps
- Flicker-free
- Immediate start
- No UV light, low heat
- Not suitable for direct current
- Same length as an electronic 55-W compact fluorescent lamp
- Check compatibility with the electronic ballast using the compatibility list at https://www.lighting.philips.co.uk/consumer/documentation-and-downloads
Top Pick
Philips MASTER LEDtube HF InstantFit ECGs are ideal as an alternative to conventional T8 fluorescent lamps on electronic ballasts and enable considerable energy savings.
LED lamp as a replacement for conventional fluorescent lamps for use in private and professional applications.
E.g. in corridors, shelf lighting, backlighting, display cabinets, parking garages, cold stores, stairwells.
- Instant start, no flickering when switched on
- No mercury
- LEDtube for electronic ballasts are not suitable for operation on 230V
Supplied without starter"
Excellent
- Only 3.9-W power consumption
- Luminous flux: 300 lm
- Neutral white light with 4000 K
- Excellent colour reproduction with 97 Ra
- Dimmable with many dimmers
- Beam angle: 36°
- LED service life up to 40,000 h
- Diameter: 50 mm
- Height: 54 mm
Recommended
Features:
- Mercury-free
- Power consumption: 10.5 W
- Fitting: E27
- Luminous flux: 1521 lumens
- Beam angle: 360 degrees
- Light colour: Extra-warm white with 2700 Kelvin
- For direct operation at 230 V
- Suitable for twilight switches
- Suitable for motion detectors
- Instant start
- Minimal luminous flux
- Minimal heat generation
- No UV or infrared radiation
Featured
LED PLC
For use as general and accent lighting in private and professional applications
LED replacement for PLC 4P, TCDE, Dulux DE, Ralux DE, Lynx DE and all bulbs of the same type
4-pin bulbs for electronic ballasts (PLC 4P. Dulux DE, TCDE, Ralux DE, LynxDE etc.)
- Output: 9.5 W
- Replacement for 26-W bulb with 4-pin fitting
- Light colour: 830 3000 K, warm white
- Luminous flux: 1100 lm
- Rotatable fitting (135 degrees)
- For horizontal use
- In the case of vertical use, check the light distribution
- Housing made from shatter-proof polycarbonate
- Use without conversion, operation on existing ballast possible
- Not dimmable
- Immediate start
- Not suitable for direct current
Alternative
- Only 5.5-W power consumption
- Luminous flux: 375 lm
- Warm white light with 3000 K
- Excellent colour reproduction with 97 Ra
- Dimmable with many dimmers
- Beam angle: 25°
- LED service life up to 40,000 h
- Diameter: 50 mm
- Height: 54 mm
CorePro LEDtube T8 for conventional/low-loss ballast
The Philips CorePro LEDtube family is an ideal alternative to conventional T8 fluorescent lamps on conventional/low-loss ballast.
The energy efficiency ensures immediate savings you can rely on for a long and reliable service life.
- High energy savings compared to conventional T8 fluorescent lamps.
- Minimal maintenance costs due to high service life.
- Usually pays off during the first year.
- More robust and resistant compared to conventional T8 fluorescent lamps.
- No power-on delay and optimal lighting without any flickering or humming.
- Free from mercury.
LED PLC
For use as general and accent lighting in private and professional applications
LED replacement for PLC 4P, TCDE, Dulux DE, Ralux DE, Lynx DE and all bulbs of the same type
4-pin bulbs for electronic ballasts (PLC 4P. Dulux DE, TCDE, Ralux DE, LynxDE etc.)
- Output: 6.5 W
- Replacement for 18-W bulb with 4-pin fitting
- Light colour: 830 3000 K, warm white
- Luminous flux: 700 lm
- Rotatable fitting (135 degrees)
- For horizontal use
- In the case of vertical use, check the light distribution
- Housing made from shatter-proof polycarbonate
- Use without conversion, operation on existing ballast possible
- Not dimmable
- Immediate start
- Not suitable for direct current
Used in general and accent lighting in private and professional applications
Replacement for a conventional 35-watt lamp
Features:
- Glass body like halogen lamps
- For operation at 230 volts
- Suitable for twilight switches
- Suitable for motion detectors
- Instant start
- Minimal heat generation
- No UV or infrared radiation
- non-dimmable
Dimensions:
Total length: 54 mm
Maximum diameter: 50 mm"
LED PLC
For use as general and accent lighting in private and professional applications
LED replacement for PLC 4P, TCDE, Dulux DE, Ralux DE, Lynx DE and all bulbs of the same type
4-pin bulbs for electronic ballasts (PLC 4P. Dulux DE, TCDE, Ralux DE, LynxDE etc.)
- Output: 6.5 W
- Replacement for 18-W bulb with 4-pin fitting
- Light colour: 840 4000 K, neutral white
- Luminous flux: 770 lm
- Rotatable fitting (135 degrees)
- For horizontal use
- In the case of vertical use, check the light distribution
- Housing made from shatter-proof polycarbonate
- Use without conversion, operation on existing ballast possible
- Not dimmable
- Immediate start
- Not suitable for direct current
- Only 5.5-W power consumption
- 400 lm luminous flux
- Warm white light with 4000 K
- Excellent colour reproduction with 97 Ra
- Dimmable with many dimmers
- Beam angle: 36°
- LED service life up to 40,000 h
- Diameter: 50 mm
- Height: 54 mm
LED pin fitting bulb
For use as general and accent lighting in private and professional applications.
- G9 base
- Output: 1.9 W
- Light colour: 827 2700 K, extra-warm white
- Luminous flux: 220 lm
- Mercury-free
- Instant start
- Minimal luminous flux
- Minimal heat generation
- No UV or infrared radiation
- Impact-proof and vibration-proof
- Dimensions:
- Total length: 34 mm
- Maximum diameter: 14 mm
LED pin fitting bulb
For use as general and accent lighting in private and professional applications.
- Output: 2.7 W
- Light colour: 827 2700 K, extra-warm white
- Luminous flux: 300 lm
- Mercury-free
- Instant start
- Minimal luminous flux
- Minimal heat generation
- No UV or infrared radiation
- Impact-proof and vibration-proof
- Dimmable
- Dimensions:
- Total length: 52 mm
- Maximum diameter: 16 mm
For use as general and accent lighting in private and professional applications.
Features:
- Power consumption: 2.3 W
- Light colour 827 warm white extra, 2700 K
- Beam angle: 36°
- GU4 base
- Luminous flux: 184 lumens
- Nominal service life: 25,000 hours
- Glass body like halogen lamps
- Voltage: for 12-V low-voltage halogen transformers or LED drivers
- Suitable for twilight switches
- Suitable for motion detectors
- Instant start
- Minimal heat generation
- No UV or infrared radiation
- Maximum diameter: 35 mm
Features:
- Mercury-free
- Power consumption: 8.5 W
- Fitting: E27
- Luminous flux: 1055 lumens
- Beam angle: 360 degrees
- Light colour: Extra-warm white with 2700 Kelvin
- For direct operation at 230 V
- Suitable for twilight switches
- Suitable for motion detectors
- Instant start
- Minimal luminous flux
- Minimal heat generation
- No UV or infrared radiation
Features:
- Length 1500 mm (equivalent to the length of a conventional 58 W fluorescent lamp)
- Output: 21.1 W
- Luminous flux: 4100 lm
- Light colour: 840 4000 K, neutral white
- Fitting: G13
- For operation on conventional ballasts with starter (KVG/VVG) or on 230 V mains voltage
- Includes bypass starter
CorePro LEDtube T8 for conventional/low-loss ballast
The Philips CorePro LEDtube family is an ideal alternative to conventional T8 fluorescent lamps on conventional/low-loss ballast.
The energy efficiency ensures immediate savings you can rely on for a long and reliable service life.
- High energy savings compared to conventional T8 fluorescent lamps.
- Minimal maintenance costs due to high service life.
- Usually pays off during the first year.
- More robust and resistant compared to conventional T8 fluorescent lamps.
- No power-on delay and optimal lighting without any flickering or humming.
- Free from mercury.
- Only 13-W power consumption
- 2000-lm luminous flux
- Replacement for 120-W light bulbs
- Warm white light with 2700 K
- Good colour reproduction with 80 Ra
- Nominal service life 15,000 h
- Switch-proof with up to 20,000 switching cycles
- Base: E27
- non-dimmable
- Dust- and splash-proof (IP44)
- Design: clear
- Height: 121 mm
- Diameter: 70 mm
CorePro LED linear R7S 118 mm 14 - 100 W 830 D
CorePro R7S is a retrofit solution to replace conventional R7S twin-side socketed lamps. Their light is comparable to that of a halogen lamp thanks to the ""light all around"" concept. Within the range, you can choose dimmable products with low-dimming function, which can create a cosy atmosphere when inserted in a dimmable luminaire."
- Only 5.5-W power consumption
- Luminous flux: 365 lm
- Warm white light with 2700 K
- Excellent colour reproduction with 97 Ra
- Dimmable with many dimmers
- Beam angle: 25°
- LED service life up to 40,000 h
- Diameter: 50 mm
- Height: 54 mm
LED pin fitting bulb
For use as general and accent lighting in private and professional applications.
- G9 base
- Output: 3.7 W
- Light colour: 827 2700 K, extra-warm white
- Luminous flux: 470 lm
- Mercury-free
- Instant start
- Minimal luminous flux
- Minimal heat generation
- No UV or infrared radiation
- Impact-proof and vibration-proof
- Dimensions:
- Total length: 52 mm
- Maximum diameter: 16 mm
Philips LED LIGHT BULB SHAPED lamp
- Output: 10.5 W
- Fitting: E27
- Clear bulb
- LED filament technology
- Light volume: 1521 lm
- Dimmable
- Warm white light from 922 to 927 with 2200 to 2700 K
- Colour reproduction > Ra90
- When dimming down, the light colour of the DimTone bulb becomes warmer (with 100% light, the light colour is 2700 K (warm white) and changes to 2200 K (extra-warm white) when dimmed down to 10%). Just as with halogen lamps and standard light bulbs.
For use as general and accent lighting in private and professional applications
Replacement for a conventional 20-W bulb
- Output: 2.1 W
- Light colour: 827 2700 K, extra-warm white
- Luminous flux: 400 lm
- Glass body like halogen lamps
- For direct operation at 230 V
- Suitable for twilight switches
- Suitable for motion detectors
- Instant start
- Minimal heat generation
- No UV or infrared radiation
- Dimmable
LED PLC
For use as general and accent lighting in private and professional applications
LED replacement for PLC 4P, TCDE, Dulux DE, Ralux DE, Lynx DE and all bulbs of the same type
4-pin bulbs for electronic ballasts (PLC 4P. Dulux DE, TCDE, Ralux DE, LynxDE etc.)
- Output: 5.5 W
- Replacement for 13-W bulb with 4-pin fitting
- Light colour: 840 4000 K, neutral white
- Luminous flux: 660 lm
- Rotatable fitting (135 degrees)
- For horizontal use
- In the case of vertical use, check the light distribution
- Housing made from shatter-proof polycarbonate
- Use without conversion, operation on existing ballast possible
- Not dimmable
- Immediate start
- Not suitable for direct current
CorePro LED linear D 14-120W R7S 118 830
CorePro R7S is a retrofit solution to replace conventional R7S twin-side socketed lamps. Their light is comparable to that of a halogen lamp thanks to the ""light all around"" concept. Within the range, you can choose dimmable products with low-dimming function, which can create a cosy atmosphere when inserted in a dimmable luminaire."
CorePro LEDtube T8 for conventional/low-loss ballast
The Philips CorePro LEDtube family is an ideal alternative to conventional T8 fluorescent lamps on conventional/low-loss ballast.
The energy efficiency ensures immediate savings you can rely on for a long and reliable service life.
- High energy savings compared to conventional T8 fluorescent lamps.
- Minimal maintenance costs due to high service life.
- Usually pays off during the first year.
- More robust and resistant compared to conventional T8 fluorescent lamps.
- No power-on delay and optimal lighting without any flickering or humming.
- Free from mercury.
- Only 5.5-W power consumption
- Luminous flux: 375 lm
- Warm white light with 3000 K
- Excellent colour reproduction with 97 Ra
- Dimmable with many dimmers
- Beam angle: 36°
- LED service life up to 40,000 h
- Diameter: 50 mm
- Height: 54 mm
Philips LED LIGHT BULB SHAPED lamp
- Output: 5.9 W
- Fitting: E27
- Clear bulb
- LED filament technology
- Light volume: 806 lm
- Dimmable
- Warm white light from 922 to 927 with 2200 to 2700 K
- Colour reproduction > Ra90
- When dimming down, the light colour of the DimTone bulb becomes warmer (with 100% light, the light colour is 2700 K (warm white) and changes to 2200 K (extra-warm white) when dimmed down to 10%). Just as with halogen lamps and standard light bulbs.
CorePro R7S is a retrofit solution to replace conventional R7S double-ended linear lamps. Their light is comparable to that of a halogen lamp thanks to the ""light all around"" concept."
The Philips MASTER LEDtube HF InstantFit EVG is an excellent alternative to conventional T8 fluorescent lamps on electronic ballasts and provides significant energy savings.
LED lamp to replace conventional fluorescent lamps for use in private and professional applications.
e.g. in corridors, shelving lights, back lights, display cases, parking garages, cold stores, stairwells.
- Instant start, no flickering when switching on
- No mercury
- LED tubes for electronic ballasts are not suitable for operation on 230 V
CorePro LEDtube T8 for conventional/low-loss ballast
The Philips CorePro LEDtube family is an ideal alternative to conventional T8 fluorescent lamps on conventional/low-loss ballast.
The energy efficiency ensures immediate savings you can rely on for a long and reliable service life.
- High energy savings compared to conventional T8 fluorescent lamps.
- Minimal maintenance costs due to high service life.
- Usually pays off during the first year.
- More robust and resistant compared to conventional T8 fluorescent lamps.
- No power-on delay and optimal lighting without any flickering or humming.
- Free from mercury.
- 90 % of the energy is emitted as heat in the infrared range
- pronounced peak power at 1000 nm in the deep penetrating IR-A range
- red lamps reduce visible light emissions and glare and suppress light with wavelengths below 600 nm that would be absorbed by hemoglobin in the blood
- optimal directional control of heat radiation through integrated Fresnel lens
- special helical design ensures concentrated beam of radiation
- any focal position
Dimensions: Total length: 136 mm, Diameter: 121 mm"
- Only 5.5-W power consumption
- 400 lm luminous flux
- Neutral white light with 4000 K
- Excellent colour reproduction with 97 Ra
- Dimmable with many dimmers
- Beam angle: 25°
- LED service life up to 40,000 h
- Diameter: 50 mm
- Height: 54 mm
CorePro LED linear D 14-120W R7S 118 840
CorePro R7S is a retrofit solution to replace conventional R7S twin-side socketed lamps. Their light is comparable to that of a halogen lamp thanks to the ""light all around"" concept. Within the range, you can choose dimmable products with low-dimming function, which can create a cosy atmosphere when inserted in a dimmable luminaire."
