Review Lanberg lbg pce1gb201 network card pcie gigabit ethernet rj4

LANBERG LBG PCE1GB001 - Network card, PCIe, Gigabit Ethernet, RJ45 26.44 EUR Network card, PCI Express, 1x Gigabit Ethernet

PCI Express adapter with 1x RJ45 socket

Chipset: Broadcom BCM5751
Data transfer rate: Ethernet up to 10 Mb/s (half/full duplex), Fast Ethernet up to 100 Mb/s (half/full duplex), Gigabit Ethernet up to 1000 Mb/s (half/full duplex)
Supports Wake on Lan (WoL)
Supports IEEE 802.3x full duplex flow control
Low profile bracket
Plug and Play
Dimensions: 76.3 x 55.6 x 17 mm
Operating temperature: 0 -50°C, Relative humidity: 10%-90% (non-condensing), Storage temperature: -0 -80°C

SEE OFFER SEE OFFER ebay

EXSYS EX-6084 - Network card, PCIe, Gigabit Ethernet, 4x RJ45 133.88 EUR The EX-6084 is a fast Quad (Quad) Gigabit Ethernet card for the PCIe x4 bus. The EX-6084 supports a data transfer rate of up to 1000 Mbps per port. Larger amounts of data can thus be transmitted faster and more efficiently in the network. The EX-6084 supports half and full duplex and NWay auto-negotiation to automatically adjust to network speed (10/100/1000Mbps). Furthermore, the card is equipped with Auto-MDI/MDI-X and offers a very wide range of support for various operating systems. The installation is very simple and any single port can be switched on and off during operation. With the EX-6084, a low profile bracket is supplied for narrow computers up to 8 cm in height.

Supports 100/1000/10000 Base-T Ethernet standard
Supports Auto-MDI/MDI-X Auto (for crossover cable)
Supports Jumbo Frame up to 16KBytes,
Energy efficient Ethernet (EEE)
Wake-on-LAN and Remote Wake-up
Supports Full Duplex Flow Control (IEEE 802.3x)
Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1p Layer 2 priority encoding
Virtual NIC support
LED Display of data transmission
Standard CAT-6A cabling with RJ45 connection
Chipset: 4 x Realtek RTL8153B

SEE OFFER SEE OFFER ebay

EXSYS EX-60114 - Network card, PCIe, 2.5 Gigabit Ethernet, 4x RJ45 144.27 EUR 4-Port 2.5 Gigabit PCIe Network card (Realtek chipset)

Support 10/100/1000/2500 Base-T Ethernet standards
Supports 1-Lane 2.5/5Gbps PCI Express bus
Fully compliant with PCI Express version 2.1
Supports 2.5G Lite (1G data rate) mode
Support Jumbo Frame up to 16KBytes, Pair Swap/Polarity/Skew correction
Auto-Negotiation with Extended Next Page capability (XNP)
Support Auto-MDI/MDI-X Auto (for Crossover cable)
Hardware ECC and CRC function
Support IEEE 802.3az-2010 Energy Efficient Ethernet (EEE)
Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP, UDP) Checksum and Segmentation Task-offload (Large send and Giant send) support
Supports IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.1Q VLAN taggingand IEEE 802.1ad Double VLAN
Support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Supports Virtual Machine Queue (VMQ) for Windows Server Hyper-V Installed Systems
Wake-on-LAN and ‘RealWoW!’ Technology (remote wake-up)
Activity LED data transfer mode
Support Low Profile for small Computer cases with 8cm height
Chipset: Realtek RTL8125B

The EX-60114 is a 2.5 Gigabit Ethernet card with four RJ45-Ports for the PCIe bus.
It supports Half and Full Duplex as well as NWay Auto-Negotiation to automatically adapt to the speed in the network (10/100/1000/2500 Mbit/s.).
Furthermore, the card is equipped with Auto-MDI/MDI-X and offers extensive support for various operating systems.
A low profile bracket is supplied with the card for installation in a narrow PC case.

Package Contents:

EX-60114
Low Profile bracket
manual

SEE OFFER SEE OFFER ebay

EXSYS EX-6074-3 - Network card, PCIe, Gigabit Ethernet, 4x RJ45 216.62 EUR 4 port Ethernet 1Gigabit LAN PCIe x4 card for each output a separate device

The EX-6074-3 is a fast Quad Gigabit Ethernet card for the PCIe x4 to x16 bus.
For each output a Realtek chip was used. The EX-6074-3 supports a data transfer rate of up to 1000Mbit per second per port.
Larger amounts of data can thus be transferred faster and more efficiently in the network.
The EX-6074-3 supports Half and Full Duplex as well as NWay Auto-Negotiation to automatically adapt to the speed in the network (10/100/1000 Mbit/s.).
Furthermore, the card is equipped with Auto-MDI/MDI-X and offers a very wide support of various operating systems.
The EX-6074-3 comes with a low profile bracket for slim computers up to 8cm height.

Support 10/100/1000 Base-T Ethernet standards
Support PCI-Express x4 to x16 bus specification rev. 2.0
Support Auto-MDI/MDI-X Auto (for Crossover cable)
Support Jumbo Frame up to 9Kbytes
EEE (Energy Efficient Ethernet)
Wake-on-LAN and Remote Wake up
Support Full Duplex Flow Control (IEEE 802.3x)
Support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding
48KB Buffer Transmit/Receiver chip
Activity LED to check the data transfer
Standard Cat.6A cabling with RJ45 connectors

SEE OFFER SEE OFFER ebay

EXSYS EX-60204 - Network card, PCIe, Gigabit Ethernet, 4x RJ45 159.77 EUR 4-port 1Gigabit PCIe network card (Intel I350-AM4 chipset)

The EX-60204 is a 1 Gigabit Ethernet card with four RJ45 ports for the PCIe bus.
It supports half and full duplex as well as auto-negotiation for automatic adaptation to the network speed (10/100/1000 MBit/s).
The Intel Ethernet controller used guarantees the highest quality and reliability.

Supports 10/100/1000 Base-T Ethernet standard
Supports 4-lane 2.5 + 5 GT/s PCI Express bus
Fully compatible with PCI Express 2.0
Supports Jumbo Frames up to 9KBytes
Automatic cross-over detection (MDI/ MDI-X)
Supports Preboot eXecution Environment (PXE)
Supports Legacy and Message Signal Interrupt (MSI/MSI-X)
IEEE 802.3 auto-negotiator - automatic connection configuration for speed, duplex and flow control
Time stamping and IEEE 1588 Precision Time Protocol
IEEE 802.3az - Energy Efficient Ethernet (EEE)
Active State Power Management (ASPM)
Full wake-up support (APM/ACPI)
Latency Tolerance Reporting (LTR)
LED indicator for activity and data transfer mode
Original Intel chipset, brand new, not refurbished / B-grade
Chipset: Intel I350-AM4

Scope of delivery:

EX-60204, low profile bracket, manual

SEE OFFER SEE OFFER ebay

DELOCK 88601 - Network card, PCIe, 2,5 Gigabit Ethernet, 4x RJ45 113.26 EUR The PCI Express card by Delock offers four network ports with a data transfer rate up to 2500 Mbps.

NBASE-T for higher speed
Modern services and new technologies require higher bandwidths. NBASE-T technology enables speeds of 1 Gbps and 2.5 Gbps with conventional networking cables. The best possible transmission rate is set automatically.

Technical details

Connectors:
external: 4 x 2.5 Gigabit LAN RJ45 jack
internal: 1 x PCI Express x4, V2.1
Chipset: Realtek RTL8125B
Data transfer rate:
Ethernet up to 10 Mbps
Fast Ethernet up to 100 Mbps
Gigabit Ethernet up to 1000 Mbps
NBASE-T with up to 2.5 Gbps
PCI Express x4 up to 16 Gbps
Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Supports Wake On LAN (WOL)
Supports IEEE 802.1P layer 2 priority encoding
Supports IEEE 802.3x full duplex flow control
Supports IEEE 802.1Q Virtual LAN (VLAN)
Supports 16k Jumbo Frames
LED indicator for link and activity

System requirements

Windows 10/10-64/11
PC with one free PCI Express x4 / x8 / x16 / x32 slot

Package content

PCI Express card
Low profile bracket
User manual

Package

Box

SEE OFFER SEE OFFER ebay

DELOCK 88207 - Network card, PCIe, Gigabit Ethernet, 4x RJ45 133.97 EUR The PCI Express card by Delock offers four network ports with a data transfer rate up to 1000 Mbps.

Specification

Connectors:
external: 4 x Gigabit LAN RJ45 jack
internal: 1 x PCI Express x1, V2.0
Chipset: Broadcom BCM5719
Data transfer rate:
Ethernet up to 10 Mbps
Fast Ethernet up to 100 Mbps
Gigabit Ethernet up to 1000 Mbps
PCI Express x1 up to 4 Gbps
Supports IEEE 802.3 / 802.3u / 802.3ab
Supports IEEE 802.3x full duplex flow control
Supports IEEE 802.3az (Energy Efficient Ethernet)
Supports 9k Jumbo Frames
Supports Wake On LAN (WOL)
Supports IEEE 802.1Q Virtual LAN (VLAN)
Supports PXE
LED indicator for link and activity

System requirements

Windows 10/10-64/11
PC with one free PCI Express slot

Package content

PCI Express card
Low profile bracket
User manual

Package

Box

SEE OFFER SEE OFFER ebay

DELOCK 86097 - Network card, PCIe, Gigabit Ethernet, 4x RJ45, PoE+ 226.96 EUR The PCI Express card by Delock offers four network ports with a data transfer rate up to 1000 Mbps.

PoE support
The RJ45 ports support Power over Ethernet according to IEEE 802.3af / 802.3at, so power can be supplied to PoE-enabled devices, such as IP cameras or PoE splitters via the network cable.

Technical details

Connectors:
external:
4 x Gigabit LAN RJ45 jack
internal:
1 x PCI Express x4, V2.1
1 x 4 pin power connector
Chipset: Intel i350
Data transfer rate:
Ethernet up to 10 Mbps (Half/Full Duplex)
Fast Ethernet up to 100 Mbps (Half/Full Duplex)
Gigabit Ethernet up to 1000 Mbps (Half/Full Duplex)
PCI Express x4 up to 16 Gbps
Suitable for Gigabit Ethernet vision systems
Supports IEEE 1588 PTP
Supports IEEE 802.3 / 802.3u / 802.3ab
Supports IEEE 802.1Q Virtual LAN (VLAN)
Supports IEEE 802.3az (Energy Efficient Ethernet)
Supports 9k Jumbo Frames
Supports IEEE 802.3af PoE
Supports IEEE 802.3at PoE+
Output power: max. 120 W total
LED indicator for link and activity

System requirements

Windows 10/10-64/11
PC with one free PCI Express x4 / x8 / x16 / x32 slot

Package content

PCI Express card
User manual

Package

Box

SEE OFFER SEE OFFER ebay

BROADCOM BROAD BCM5719-4P - Network card, PCIe, Gigabit Ethernet, 4x RJ45 139.05 EUR Broadcom BCM5719-4P - 4 x 1GbE PCIe NIC

High-Performance, Feature-Rich NetXtreme® Quad-Port 1G PCIe Ethernet NIC

4x RJ45 10/100/1000 Gigabit Ethernet
PCIe 2.0 x4
BCM5719 Chipsatz

Designed for today's enterprise and data center environments, Broadcom's NetXtreme® 1G Ethernet Adapters are the ideal solution for multicore servers, delivering full line-rate throughput across all ports.

Energy Efficient Ethernet compliant with IEEE Std 802.3az-2010
IEEE 802.3ap Clause 73 auto-negotiation
Quad 10/100/1000BASE-T full-duplex/half-duplex MACs
Virtualization support with VMware NetQueue and Microsoft VMQ
Wake-on-LAN support
Energy Efficient Ethernet (EEE)

The BCM5719 PCIe NIC is a 13th-generation 10/100/1000BASE-T and 10/100/1000BASE-X Ethernet LAN controller solution for high-performance server and networking applications.
The host interface supports a separate PCI Express function for each LAN interface.
The BCM5719 includes I/O Virtualization (IOV) features such as 17 receive and 16 transmit queues, and 17 MSI-X vectors with flexible vector-to-queue association.
These IOV features enable the BCM5719 to support VMWare® NetQueue and Microsoft® VMQ technologies.

The BCM5719 includes a comprehensive set of hardware features that the system may use to implement IEEE 1588 or IEEE 802.1AS-based time synchronization.
These hardware features include a high-precision clock, timestamp registers for receive/transmit packets, and programmable trigger inputs and watchdog outputs.

Applications

Cloud and Web2.0 data center servers
Enterprise data center servers
Private Cloud
Machine Learning (ML) clusters
High-Performance Computing (HPC) clusters
Multi-node container platforms
NVMe storage disaggregation (NVMe-oF™)
Database serves

SEE OFFER SEE OFFER ebay

TRENDNET TRN TEG-10GECTX - Network card, PCI Express x4, 10 Gigabit Ethernet, 1x RJ45 97.8 EUR 10 Gigabit PCIe network adapter

TRENDnet's 10 Gigabit PCIe network adapter transforms an unused PCI Express slot into a 10 Gigabit Ethernet port.

Converts a PCIe slot to a 10 G Ethernet port
Supports 802.1Q VLAN tagging
Standard and flat retaining clips included
Supports Windows® and Linux®.

Supports five selectable speeds:

10 Gbps
5 Gbps
2.5 Gbps
1 Gbps
100 Mbps

jumbo frame
Sends larger packets or Jumbo Frames (up to 16 KB) for better performance

Scope of delivery:

TEG-10GECTX
Quick Installation Guide
CD-ROM (driver and user manual)
Standard and flat retaining clamps

SEE OFFER SEE OFFER ebay

EXSYS EX-60115 - Network card, PCI Express, 2.5 Gigabit Ethernet, 4x RJ45 216.62 EUR 4 port 2.5 Gigabit PCIe network card (4x Intel I225-V chipset)

Supports 10/100/1000/2500 Base-T Ethernet standard
Supports 4-lane 2.5/5Gbps PCI Express bus
Fully compatible with PCI Express 3.1
Supports Jumbo Frame up to 9KBytes
Automatic cross-over detection (MDI/ MDI-X)
Supports Preboot eXecution Environment (PXE)
Supports Legacy and Message Signal Interrupt (MSI/MSI-X)
IEEE 802.3 auto-negotiator - automatic connection configuration for speed, duplex and flow control
Time stamping and synchronization of time-critical applications.
Scalable I/O for Linux environments (IPv4, IPv6, TCP/UDP)
IEEE 802.3az - Energy Efficient Ethernet (EEE)
Active State Power Management (ASPM)
MAC Power Management Control
Full wake-up support (APM/ACPI)
Latency Tolerance Reporting (LTR)
LED indicator for activity and data transfer mode
Chipset: 4x Intel I225-V

The EX-60115 is a 2.5 Gigabit Ethernet card with four RJ45 ports for the PCIe bus.
It supports half and full duplex as well as auto-negotiation for automatic adaptation to the network speed (10/100/1000/2500 Mbit/s).
Thanks to PCI Express x4 with four lanes, sufficient bandwidth is available to provide the full performance of 2.5 Gbit/s on all four Ethernet ports simultaneously.

Scope of delivery:

EX-60115
Low profile bracket
Instruction manual

SEE OFFER SEE OFFER ebay

TRENDNET TRN TEG-25GECTX - Network card, PCI Express x4, Gigabit Ethernet, 1x RJ45 51.24 EUR 2.5GBASE-T PCIe network adapter

Converts a PCIe slot to a 2.5G Ethernet port
Supports 802.1Q VLAN tagging
Standard and flat retaining clips included
Supports Windows® and Linux®.
IEEE 802.3ab and 802.3bz compliant
Supports up to 9KB jumbo frames

The 2.5GBASE-T PCIe network adapter from TRENDnet, model TEG-25GECTX, converts a free PCI Express slot into a 2.5GBASE-T Ethernet port. The 2.5G network adapter includes advanced features like Jumbo Frame and VLAN tagging support. The 2.5G network adapter is compatible with Windows® and Linux® desktop computer designs and includes both standard and low-profile brackets.

2.5GBASE-T (2.5Gbps): Cat5e twisted pair over 100m (max.)
1000GBASE-T (2.5Gbps): Cat5e Twisted Pair over 100m (max.)
100GBASE-TX (100Mbps): Cat5 Twisted Pair over 100m (max.)

SEE OFFER SEE OFFER ebay

EXSYS EX-6074P-2 - Network card, PCI Express, Gigabit Ethernet, 4x RJ45 294.14 EUR PCIe Quad network card with 4x 1Gigabit, PoE

Supports four PoE Gigabit Ethernet ports with 15.40W or 30.20 W
Supplies network end devices with power via the data line
Supports 10/100/1000 Base-T Ethernet standard
Fully compatible with IEEE 802.3at PoE+ (PSE) Type 1 and 2 operation
Maximum power output: Type 1 = 15.40 W / Type 2 = 30.20 W
Supports Auto-MDI/MDI-X Auto (for crossover cable)
Supports Pair Swap/Polarity/Skew Correction
Wake-on-LAN and remote wake-up
Supports Full Duplex Flow Control (IEEE 802.3x)
Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding
48KB Buffer Transmit/Receiver Chip / LED indication of data transmission
Chipset: 4x Realtek RTL8111G

The EX-6074PoE-2 is a fast Quad Gigabit Ethernet PCIe card.
It can supply end devices such as IP telephones, IP cameras or WLAN access points with a voltage of 48VDC via the network cable.
This means that the end devices do not require additional sockets or expensive switches that support PoE.
The EX-6074PoE-2 provides you with a cost-effective solution with a maximum output of 34.20 W and a maximum data transfer rate of 1000 Mbps.
The various end devices can be supplied with power directly via the data lines.
This saves costs and increases flexibility as to where the end devices are installed.
The EX-6074PoE-2 supports half and full duplex as well as Nway auto-negotiation to automatically adapt to the network speed (10/100/1000 Mbit/sec.).
The card is also equipped with Auto-MDI/MDI-X.

Scope of delivery:

EX-6074PoE-2
Driver CD
User manual

SEE OFFER SEE OFFER ebay

STARTECH.COM ST 1000SPEX43 - Network card, PCI Express x4, Gigabit Ethernet, 4 x RJ45 230.42 EUR 4-port PCIe Gigabit network card

Equip a client, server, or workstation with a PCI Express slot with four Gigabit Ethernet ports

Add four independent Gigabit RJ45 ports to connect multiple networks for high-bandwidth workstations and servers
Realtek RTL8111G chipset for reliable performance
Supports full duplex flow control

Now you can add four separate Gigabit network ports to your client, server, or workstation from a single PCI Express slot to enable multi-network connectivity without overstretching your budget.

Reliable connectivity to multiple networks
This 4-port network card provides high-performance connectivity for your business or office environment with support for high-performance 4-channel networks and maximum throughput of up to 1000 Mbps in each direction (2000 Mbps total). The network adapter card features the Realtek RTL8111G chipset, designed for the performance and enhanced features you need to reliably connect to a server or computer.

A versatile and cost-effective solution
This versatile four-port network card is suitable for many enterprise applications that require server or workstation upgrades, thanks to the feature-rich four-port Gigabit networking capability. This low-cost PCIe Gigabit NIC is compatible with a wide range of operating systems and is suitable for many SMB and enterprise applications, such as virtualized environments with multiple NICs (check VM software for chipset compatibility).

SEE OFFER SEE OFFER ebay

EXSYS EX-1330M - Network card, USB 3.0, Gigabit Ethernet, 4x RJ45 172.18 EUR USB 3.0/3.1 (Gen1) to 4 x Ethernet 1Giga (Metal housing)

With the EX-1330M you can integrate your Windows, Linux or MAC Computer/Notebook via the USB 3.0 with A- or C-female port in the same time to four 10/100/1000Mbps network or internet. The EX-1330M can be installed in the same time with an existing network card and offer you then four additional 1Gigabit ports. The installation is very easy and it is not necessary to open the system. The EX-1330M has a metal housing and it’s include the adapter EX-47990 with C-male to A-female connector.

support 100/1000/10000 Base-T Ethernet standards
support Auto-MDI/MDI-X Auto (for Crossover cable)
support Jumbo Frame up to 16Kbytes
EEE (Energy Efficient Ethernet)
Wake-on-LAN and Remote Wake-up
support Full Duplex Flow Control (IEEE 802.3x)
support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging,
IEEE 802.1P Layer 2 Priority Encoding
virtual NIC support
Activity LED to check the data transfer
Standard CAT-6A cabling with RJ45 connector
Chip-Set: Realtek RTL8153B

SEE OFFER SEE OFFER ebay

DELOCK 89192 - Network card, PCI Express, 2.5 Gigabit Ethernet, 4x RJ45 221.79 EUR The PCI Express card by Delock offers four network ports with a data transfer rate up to 2500 Mbps.

NBASE-T for higher speed
Modern services and new technologies require higher bandwidths. NBASE-T technology enables speeds of 1 Gbps and 2.5 Gbps with conventional networking cables. The best possible transmission rate is set automatically.
Specification

Connectors external: 4 x 2.5 Gigabit LAN RJ45 jack
Connectors internal: 1 x PCI Express x4, V2.1
Chipset: Realtek RTL8125B
Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Supports Wake On LAN (WOL)
Supports IEEE 802.1P layer 2 priority encoding
Supports IEEE 802.3x full duplex flow control
Supports IEEE 802.1Q Virtual LAN (VLAN)
Supports 16k Jumbo Frames
Supports PXE
LED indicator for link and activity

System requirements

Windows 8.1/8.1-64/10/10-64
PC with one free PCI Express slot

Package content

PCI Express card
Low profile bracket
Driver CD
User manual

SEE OFFER SEE OFFER ebay

EXSYS EX-6072-4K - Network card, PCI Express, Gigabit Ethernet, 2x RJ45 97.76 EUR The EX-6072-4K is a fast Dual Gigabit Ethernet card, designed for the PCIe bus, which offers faster data transfer compared to the PCI BUS.
The EX-6072-4K supports a data transfer rate of up to 1000MBit per second per port.
The EX-6072-4K has an optical isolation of up to 4kV for each port. Larger amounts of data can thus be transmitted faster and more efficiently in the network.
The EX-6072-4K supports half and full duplex and NWay auto-negotiation to automatically adjust to network speed (10/100/1000 Mbps).
The card is also equipped with Auto-MDI/MDI-X. In addition, it offers a very wide-ranging support of various operating systems.
A low profile bracket is supplied with the card for installation in a narrow PC housing.

Supports 10/100/1000Base-T Ethernet standard
Supports 4kV optical isolation for each output
Supports Auto-MDI/MDI-X Auto (for crossover cable)
Supports Jumbo Frame up to 9KBytes, pair Swap/polarity/Skew Correction
Wake-on-LAN and Remote Wake-up
Supports Full Duplex Flow Control (IEEE 802.3x)
Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1p Layer 2 priority encoding
48KB Buffer transmit/Receiver Chip
LED display of data transmission

SEE OFFER SEE OFFER ebay

DELOCK 89025 - Network card, PCI Express, Gigabit Ethernet, 4x RJ45 71.96 EUR The PCI Express card by Delock offers four network ports with a data transfer rate up to 1000 Mbps.

Specification

Connectors external: 4 x Gigabit LAN RJ45 jack
Connectors internal: 1 x PCI Express x1, V2.0
Chipset: Realtek RTL8111F
Supports IEEE 802.3 / 802.3u / 802.3z / 802.3ab
Supports Wake On LAN (WOL)
Supports IEEE 802.3x full duplex flow control
Supports 9k Jumbo Frames
LED indicator for link and activity

System requirements

Windows 8.1/8.1-64/10/10-64
PC with one free PCI Express slot

Package content

PCI Express card
Low profile bracket
Driver CD
User manual

SEE OFFER SEE OFFER ebay

DELOCK 88504 - Network card, PCI Express, Gigabit Ethernet, 4x RJ45 175.23 EUR The PCI Express card by Delock offers four network ports with a data transfer rate up to 1000 Mbps.

Specification

Connectors external: 4 x Gigabit LAN RJ45 jack
Connectors internal: 1 x PCI Express x1, V2.1
Chipset: Intel i350
Supports IEEE 802.3 / 802.3u / 802.3z / 802.3ab
Supports IEEE 802.1Q Virtual LAN (VLAN)
Supports IEEE 802.3az (Energy Efficient Ethernet)
Supports Wake On LAN (WOL)
Supports 9k Jumbo Frames
Supports PXE
LED indicator for link and activity

System requirements

Windows 8.1/8.1-64/10/10-64
PC with one free PCI Express slot

Package content

PCI Express card
Low profile bracket
Driver CD
User manual

SEE OFFER SEE OFFER ebay

BROADCOM BROAD BCM957416A - Network card, PCIe, 10 Gigabit Ethernet, 2x RJ45 218.12 EUR Dual-Port 10GBASE-T Ethernet PCI Express 3.0 x8 Network Interface Card

The Broadcom® BCM957416A4160C is a dual-port 10GBASE-T, PCIe 3.0 x8 Network Interface Card that supports a dual-port 10GBASE-T media interface that is fully compliant with the IEEE 802.3an standard.
The card uses the Broadcom BCM57416 Ethernet controller with the integrated dual-channel 10GBASE-T transceiver.

Dual-port 10-Gigabit Ethernet: 10GBASE-T IEEE 802.3an / 1000BASE-T IEEE 802.3ab
x8 PCI Express v3.0 compliant.
SR-IOV with up to 128 VFs.
Function Level Reset (FLR) support.
TruFlow. flow processing engine.
Virtual Network Termination¡VVXLAN, NVGRE, Geneve, GRE encap/decap
Switch acceleration.
Tunnel-aware stateless offloads.
DCB support: PFC, ETS, QCN, DCBx.
RDMA over Converged Ethernet (RoCE).
SMBus 2.0.
MCTP over SMBus.
PCIe-based UART and KCS.
Jumbo frames up to 9 KB.
Advanced Congestion Avoidance.
Multiqueue, NetQueue, and VMQ.
IPv4 and IPv6 offloads.
TCP, UDP, and IP checksum offloads.
Large Send Offload (LSO).
Large Receive Offload (LRO).
TCP Segmentation Offload (TSO).
Receive-side Scaling (RSS).
Transmit-side Scaling (TSS).
VLAN insertion/removal.
Interrupt coalescing.
Network boot-PXE, UEFI.
iSCSI boot.
MSI and MSI-X.
Conforms to the PCI Express Card Electromechanical Specification Rev. 3.0

Applications
Dual-Port 10GBASE-T Ethernet Network Interface Card for Data Centers or Cloud Computing.

SEE OFFER SEE OFFER ebay

DIGITUS DN-10160 - Network card, PCIe, Gigabit Ethernet, 1x SFP 87.42 EUR Gigabit SFP PCI Express Card

Use modern Fiber technology to connect your PC with the Network

Use modern Fiber technology to connect your PC with the Network
Intel-Chipset - ensures a stable and efficient quality
Integrated Heat Sink for stabilizing the SFP temperature
Gigabit Ethernet Speed
Compatible with most Gigabit SFP modules
Includes low-profile / half-height installation bracket

With the Digitus Gigabit PCI Express Fiber Optic Network Card, you can connect a PCI Express-based desktop or rack mount PC directly to a fiber optic network using the Gigabit SFP of your choice

Technical details

Supports Full/Half-duplex Auto-Negotiation, Auto-MDI/MDIX
Supports IEEE 802.1Q VLAN tagging
Supports 1000 Mbps networks with automatic detection and setting
Layer 2 functions: IEEE 802.3x Flow Control - IEEE 802.1Q VLAN
SFP slot supporting the following transceivers: MiniGBiC 1000SX Multimode, 1000LX Singlemode, 1000BX Singlemode WDM
Intel-Chipsatz - ensures a stable and efficient quality
Integrated Heat Sink for stabilizing the SFP temperature
Supports IPv4, IPv6 protocols
Supports Jumbo Frames up to 9K
Supports Windows 10, 8.1, 8, 7, Vista, XP, Mac OS X and Linux
Operating temperature: 0°C - 55°C
Weight: 40g

Package content:

Gigabit SFP PCI Express Card
Manual
Support CD-ROM
Low profile bracket

SEE OFFER SEE OFFER ebay

EXSYS EX-1321-4K - Network card, USB 3.0, Gigabit Ethernet, 1x RJ45 106.28 EUR USB 3.0 to Ethernet 1Gigabit LAN with 4KV Optical Isolation

With the EX-1321-4K you can connect your notebook, desktop computer or in a 19-inch rack via the USB 3.0/3.1 (Gen1) or 2.0 port to a 10/100or 1000Mbps network. The EX-1321-4K support 4KV Optical Isolation for the Netware port. The EX-1321-4K can installed in the same time with an existing network card. The installation is very easy and it is not necessary to open the system. With the EX-1321-4K we delivery a Din-Rail kit for install in a 19-inch rack.

support 4KV Optical Isolation
compliant with Universal Serial Bus 3.1 (Gen1)
compatible with USB 2.0 and USB 1.1 standard
supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control
compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
supports IEEE 802.3az (Energy Efficient Ethernet)
supports crossover detection and auto-correction
power from the USB port (Bus-Power)
supports Wake-on-LAN
supports USB 3.0 screw lock cable mechanism
metal case with wall and Din-Rail mounting kit for industrial application
LEDs indicate the status of Power status and Ethernet connection
Chip-Set: ASIX AX88179

SEE OFFER SEE OFFER ebay

LANBERG LBG DSP3100560W - Switch, 5-port, Gigabit Ethernet, PoE 50.21 EUR Lanberg Switch 5X 1GB DSP+ (4 DSP 30W/Port Max 60W) Desktop

The Lanberg DSP3-1005-60W is a small, unmanaged desktop PoE+ switch equipped with 5 Gigabit Ethernet ports, including 4 PoE ports with a true 60W PoE budget for end devices in this standard. This extremely practical device works on a plug-and-play basis. The switch supports switching functions for 5 RJ-45 10/100/1000 Mbps ports as well as automatic connection negotiation and MDI-MDIX support.

5 RJ-45 10/100/1000 Mbps ports with automatic connection negotiation
60 Watt real, total PoE budget
PoE+ ports: 4x (1 ~ 4)
Uplink ports: 1x (5th port)
Supported PoE standards: IEEE 802.3af (15 W), IEEE 802.3at (30 W)
Plug-and-play - a device that requires no additional configuration
Support of MDI/MDIX, MAC-learning, MAC-aging functionality
Data flow control (Flow Control) function: Back pressure @ half duplex and IEEE 802.3x @ full duplex
Topology: Star
Protocol: CSMA/CD
MAC address table support: 2K
Switching bandwidth: 10 GBit/s
Passive cooling for quiet switch operation
Holes for wall mounting

TheDSP3 is characterized by the use of an external power supply unit, which enables the switch to operate in PoE/PoE+ mode and to use the IEEE 802.3af and IEEE 802.3at standards.

The Lanberg switch is ideal for home use thanks to its very small size (like the DSP2 version ) and the use of passive cooling. The black color scheme and the elegant, slim housing ensure that the device fits into almost any interior. The device is suitable for office applications, including SOHO and SMB. It will undoubtedly also be used in surveillance, CCTV, alarm systems, security and IT applications. The switch also offers adequate performance to meet the needs of users in the switch segment. Main features:

Intelligent port disconnection function when PoE budget is exceeded If the budget is exceeded (e.g. by a device connected to port 1), the switch will start to shut down the PoE+ ports, starting with the highest numbering, until the sum of the loads no longer exceeds the available budget, while maintaining the operation of the remaining ports. The ports that are switched off are switched off and on non-stop, so to speak.

The function automatically detects the type of network cable to be connected (straight or crossover) and adapts it so that not only one type of cabling has to be used, but also the uplink ports, which can save unnecessary costs at the same time.

The switch supports half-duplex and full-duplex modes for connections between devices. With the flow control function, you can control the data flow and thus avoid overloading the ports if one of the receiving devices cannot receive enough data.

The Lanberg switch guarantees a combination of high quality, automation and a range of functions...

SEE OFFER SEE OFFER ebay

EXSYS EX-60212 - Network card, PCIe, Gigabit Ethernet, 1x RJ45 82.25 EUR 2 port 2.5 Gigabit PCIe network card (Intel I225-V chipset)

The EX-60212 is a 2.5 Gigabit Ethernet card with two RJ45 ports for the PCIe bus.
It supports half and full duplex as well as auto-negotiation for automatic adaptation to the network speed (10/100/1000/2500 MBit/s).
The bandwidth of the PCI Express bus makes it possible to provide the full performance of 2.5 GBit/s on both Ethernet ports simultaneously.

Supports 10/100/1000/2500 Base-T Ethernet standard
Supports 2-lane 2.5 + 5GT/s PCI Express bus
Fully compatible with PCI Express 2.0
Supports Jumbo Frames up to 9KBytes
Automatic cross-over detection (MDI/ MDI-X)
Supports Preboot eXecution Environment (PXE)
Supports Legacy and Message Signal Interrupt (MSI/MSI-X)
IEEE 802.3 auto-negotiator - automatic connection configuration for speed, duplex and flow control
Time stamping and synchronization of time-critical applications
Scalable I/O for Linux environments (IPv4, IPv6, TCP/UDP)
IEEE 802.3az - Energy Efficient Ethernet (EEE)
Active State Power Management (ASPM)
MAC Power Management Control
Full wake-up support (APM/ACPI)
Latency Tolerance Reporting (LTR)
LED indicator for activity and data transfer mode
Original Intel chipset, brand new, not refurbished / B-grade

Scope of delivery:

EX-60212, low profile bracket, manual

SEE OFFER SEE OFFER ebay

MERCUSYS MSYS MA210E - Network card, PCIe, Gigabit Ethernet, 1x RJ45 22.3 EUR Gigabit PCle Network Adapter

Up to 1 Gbps
Multi-Speed Compatible
Share Files in Seconds
Flow Control
Equipped with EEE technology
Flexible Installation
include Windows 11/10/8.1/8/7/XP/Vista

Stable Gigabit Networking
Reduce connection problems caused by interference and signal attenuation. Ensure reliable, high-performance connectivity with 10/100/1000 Mbps auto-negotiation for demanding tasks.

Wider Application Range
MA210E maximises 1 Gbps internet access, seamlessly connecting to NAS devices for high-speed data transmission or linking to a host server for enhanced hardware performance:

Client Computer
Network-Attached Storage
Host Server

Wake-on-LAN
Remotely power on/off your PC via a dedicated network signal, making it the ultimate companion for remote work.

Energy-Efficient Ethernet (EEE)
Equipped with EEE technology, MA210E can slash energy use, trim your carbon footprint, and guarantee flawless performance.

Flow Control
The dynamic point-to-point credit management mechanism ensures high-speed data transmission with zero packet loss, delivering a low-latency multi-gig experience.

Precision-Crafted for Unmatched Quality
Includes both standard and low-profile brackets for compatibility with various board designs. The LED indicator lets you effortlessly know the speed of your network connection, ensuring your experience exceeds expectations at every touchpoint.

System Compatibility
Supported operating systems include Windows 11/10/8.1/8/7, Windows XP, and Windows Vista. Plug and play on Windows 11/10/8.1/8 or easily download the driver from the MERCUSYS official website for other OSes.

Scope of delivery:

Gigabit PCIe Network Adapter (MA210E)
Standard/Low-Profile Brackets
Quick Installation Guide

SEE OFFER SEE OFFER ebay

EXSYS EX-6081 - Network card, PCIe, 2,5 Gigabit Ethernet, 1x RJ45 56.36 EUR 2.5 Gigabit PCIe network card (Realtek chipset)

1x RJ45 10/100/1000/2500
1x PCIe x1
Realtek RTL8125B chipset

The EX-6081 is a 2.5 Gigabit Ethernet card designed for the PCIe bus.
The EX-6081 supports a data transfer rate of up to 2.5 GBit/s and thus offers a high speed increase compared to standard PCI network cards.
Larger amounts of data can thus be transferred faster and more efficiently in the network.
The EX-6081 supports half and full duplex as well as NWay auto-negotiation to automatically adapt to the speed in the network (10/100/1000/2500 Mbps).
Furthermore, the card is equipped with Auto-MDI/MDI-X.
In addition, it offers a very extensive support of various operating systems.
A low profile bracket is supplied with the card for installation in a narrow PC case.

Package Contents:

1x EX-6081
1x Low Profile bracket
1x driver CD
1x manual

SEE OFFER SEE OFFER ebay

MERCUSYS MSYS MA310E - Network card, PCIe, 2,5 Gigabit Ethernet, 1x RJ45 23.7 EUR 2.5 Gigabit PCle Network Adapter

Super-Fast 2.5 Gbps Networking
Multi-Speed Compatible
Wake-on-LAN
Equipped with EEE technology
Flexible Installation
include Windows 11/10/8.1/8/7

Super-Fast 2.5 Gbps Networking
MA310E delivers extreme speeds of up to 2.5 Gbps, automatically negotiating between higher and lower speed connections to ensure smooth data transmission for all your bandwidth-intensive tasks.

Wider Application Range
MA310E maximises 2.5 Gbps internet access, seamlessly connecting to NAS devices for high-speed data transmission or linking to a host server for enhanced hardware performance.

Share Files in Seconds with Smart Home Storage
Equipped with a 2.5G high-speed adapter, you can build a lightning-fast ''data expressway'' for your home or office, effortlessly handling large files and 4K workflows. Seamlessly connect central storage to all devices with zero complicated setups.

Wake-on-LAN
Remotely power on/off your PC via a dedicated network signal, making it the ultimate companion for remote work.

Energy-Efficient Ethernet
Equipped with EEE technology, MA310E can slash energy use, trim your carbon footprint, and guarantee flawless performance.

Flow Control
The dynamic point-to-point credit management mechanism ensures high-speed data transmission with zero packet loss, delivering a low-latency multi-gig experience.

Precision-Crafted for Unmatched Quality
Includes both standard and low-profile brackets for compatibility with various board designs. The LED indicators let you effortlessly know the speed of your network connecting, ensuring your experience exceeds expectations at every touchpoint.

System Compatibility
Supported operating systems include Windows 11/10/8.1/8.7, Windows Servers 2022/2019/2016/2012R2/2012/2018R2, and Linux. Plug and play on Windows 11/10 or easily download the driver from the MERCUSYS official website for other OS's.

Scope of delivery:

2.5 Gigabit PCIe Network Adapter (MA310E)
Standard/Low-Profile Brackets
Quick Installation Guide

SEE OFFER SEE OFFER ebay

CUDY PE25 - Network card, PCIe, 2.5 Gigabit Ethernet, 1x RJ45 26.44 EUR 2.5Gbps PCI Express Adapter, 2.5G/1000M/100M/10M Auto Adaptive, IEEE802.3ad, IEEE802.3az, IEEE802.1Q, IEEE802.1p, IEEE 802.3x Flow Control, IEEE802.3z, IEEE802.2, Jumbo Frame, Compatible with Windows, Windows Server 2003, 2008, 2012, 2016 32/64-bit, Linux, MAC OS, DOS

One NIC to equip your PC with 2.5G wired connectivity with WoL support.

• 10/100/1000/2500 Mbit/s Ethernet port
• Wake on LAN, flow control
• Standard/low profile bracket

SEE OFFER SEE OFFER ebay

BROADCOM BROAD BCM5720-2P - Network card, PCIe, Gigabit Ethernet, 2x RJ45 97.8 EUR BCM5720-2P - 2 x 1GbE PCIe NIC

High-Performance, Feature-Rich Dual-Port 1G PCIe Ethernet NIC

Standards-compliant dual-port 1GBASE-T PCIe networking adapter
Energy Efficient Ethernet compliant with IEEE Std 802.3az-2010
IEEE 802.3ap Clause 73 auto-negotiation
Dual 10/100/1000BASE-T full-duplex/half-duplex MACs
Virtualization support with VMware NetQueue and Microsoft VMQ
Wake-on-LAN support
Energy Efficient Ethernet (EEE)

Designed for today's enterprise and data center environments, Broadcom's 1G Ethernet Adapters are the ideal solution for multicore servers, delivering full line-rate throughput across all ports.

The BCM5720 PCIe NIC is a 13th-generation 10/100/1000BASE-T and 10/100/1000BASE-X Ethernet LAN controller solution for high-performance server and networking applications.
The host interface supports a separate PCI Express function for each LAN interface.
The BCM5720 includes I/O Virtualization (IOV) features such as 17 receive and 16 transmit queues, and 17 MSI-X vectors with flexible vector-to-queue association.
These IOV features enable the BCM5720 to support the VMWare® NetQueue and Microsoft® VMQ technologies.

The BCM5720 includes a comprehensive set of hardware features that the system may use to implement IEEE 1588 or IEEE 802.1AS-based time synchronization.
These hardware features include a high-precision clock, timestamp registers for receive/transmit packets, and programmable trigger inputs and watchdog outputs.

Applications

Cloud and Web2.0 data center servers
Enterprise data center servers
Private Cloud
Machine Learning (ML) clusters
High-Performance Computing (HPC) clusters
Multi-node container platforms
NVMe storage disaggregation (NVMe-oF™)
Database servers

SEE OFFER SEE OFFER ebay

EXSYS EX-60112 - Network card, PCIe, 2.5 Gigabit Ethernet, 2x RJ45 102.92 EUR Dual 2.5 Gigabit PCIe Network card (Realtek chipset)

Support 10/100/1000/2500 Base-T Ethernet standards
Supports 1-Lane 2.5/5Gbps PCI Express bus
Fully compliant with PCI Express version 2.1s
Supports 2.5G Lite (1G data rate) mode
Support Jumbo Frame up to 16KBytes, Pair Swap/Polarity/Skew correction
Auto-Negotiation with Extended Next Page capability (XNP)
Support Auto-MDI/MDI-X Auto (for Crossover cable)
Hardware ECC and CRC function
Support IEEE 802.3az-2010 Energy Efficient Ethernet (EEE)
Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP, UDP) Checksum and Segmentation Task-offload (Large send and Giant send) support
Supports IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.1Q VLAN tagging and IEEE 802.1ad Double VLAN
Support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Supports Virtual Machine Queue (VMQ) for Windows Server Hyper-V Installed Systems
Wake-on-LAN and ‘RealWoW!’ Technology (remote wake-up)
Activity LED data transfer mode
Support Low Profile for small Computer cases with 8cm height
Chipset: Realtek RTL8125B

The EX-60112 is a 2.5 Gigabit Ethernet card with two RJ45-Ports for the PCIe bus.
It supports Half and Full Duplex as well as NWay Auto-Negotiation to automatically adapt to the speed in the network (10/100/1000/2500 Mbit/s.).
Furthermore, the card is equipped with Auto-MDI/MDI-X and offers extensive support for various operating systems.
A low profile bracket is supplied with the card for installation in a narrow PC case.

Package Contents:

EX-60112
Low Profile bracket
manual

SEE OFFER SEE OFFER ebay

EXSYS EX-60121 - Network card, PCIe, Gigabit Ethernet, 1x RJ45, PoE 141.17 EUR 10 Gigabit PCIe network card, PoE

The EX-60121 is a 10 Gigabit Ethernet card with an RJ45 port and Power over Ethernet (PoE) for the PCIe bus. It supports half and full duplex as well as auto-negotiation for automatic adaptation to the network speed (10/100/1000/10000 MBit/s). Thanks to the integrated PoE functionality, connected PoE (PD) end devices (IP telephones, IP cameras, etc.) can be supplied with power via the network cable.

The EX-60121 supports the PoE standards IEEE 802.3af (PoE), IEEE 802.3at (PoE+) and enables a maximum power output of up to 30 W.

Supports 10/100/1000/2500/5000/1000 Base-T Ethernet standard
Fully compatible with IEEE 802.3af PoE (PSE) Type 1 = 15 W and IEEE802.3af PoE+ (PSE) Type 2 = 30 W
Maximum power output (PD): Type 1 = 12.95 W / Type 2 = 25.50 W
Fully compatible with PCI Express 4.0
Supports Jumbo Frame up to 16 KBytes
MSI, MSI-X, LSO, RSS and IPv4/IPv6 checksum offloads for high performance and low CPU utilization
Energy-efficient Ethernet (EEE), Wake On LAN and power management functions
PoE power supply via PCIe slot or via SATA connection
LED display for PoE, activity and data transfer mode
Chipset: Marvell AQC113CS

Scope of delivery:

EX-60121, low profile bracket, manual

SEE OFFER SEE OFFER ebay

EXSYS EX-60202 - Network card, PCIe, Gigabit Ethernet, 2x RJ45 118.43 EUR 2 port 1 Gigabit PCIe network card (Intel I350-AM2 chipset)

The EX-60202 is a 1 Gigabit Ethernet card with two RJ45 ports for the PCIe bus. It supports half and full duplex as well as auto-negotiation for automatic adaptation to the network speed (10/100/1000 MBit/s).
The Intel Ethernet controller used guarantees the highest quality and reliability.

Supports 10/100/1000 Base-T Ethernet standard
Supports 4-lane 2.5 + 5 GT/s PCI Express bus
Fully compatible with PCI Express 2.0
Supports Jumbo Frames up to 9KBytes
Automatic cross-over detection (MDI/ MDI-X)
Supports Preboot eXecution Environment (PXE)
Supports Legacy and Message Signal Interrupt (MSI/MSI-X)
IEEE 802.3 auto-negotiator - automatic connection configuration for speed, duplex and flow control
Time stamping and IEEE 1588 Precision Time Protocol
IEEE 802.3az - Energy Efficient Ethernet (EEE)
Active State Power Management (ASPM)
Full wake-up support (APM/ACPI)
Latency Tolerance Reporting (LTR)
LED indicator for activity and data transfer mode
Original Intel chipset, brand new, not refurbished / B-grade
Chipset: Intel I350-AM2

Scope of delivery:

EX-60202, low profile bracket, manual

SEE OFFER SEE OFFER ebay

EXSYS EX-60222 - Network card, PCIe, Gigabit Ethernet, 2x RJ45 335.49 EUR 2 port 10 Gigabit PCIe network card (Intel X550-AT2 chipset)

The EX-60222 is a 10 Gigabit Ethernet card with two RJ45 ports for the PCIe bus.
It supports half and full duplex as well as auto-negotiation for automatic adaptation to the network speed (10/100/1000/2500/5000/10000 MBit/s).
The Intel Ethernet controller used guarantees the highest quality and reliability.

Supports 10/100/1G/2.5G/5G/10G Base-T Ethernet standard
Supports 4-lane 2.5 + 5 GT/s PCI Express bus
Fully compatible with PCI Express 3.0
Supports Jumbo Frames up to 9KBytes
Automatic cross-over detection (MDI/ MDI-X)
Supports Preboot eXecution Environment (PXE)
Supports Legacy and Message Signal Interrupt (MSI/MSI-X)
IEEE 802.3 auto-negotiator - automatic connection configuration for speed, duplex and flow control
Time stamping and synchronization of time-critical applications
Scalable I/O for Linux environments (IPv4, IPv6, TCP/UDP)
IEEE 802.3az - Energy Efficient Ethernet (EEE)
Active State Power Management (ASPM)
MAC Power Management Control
Full wake-up support (APM/ACPI)
Latency Tolerance Reporting (LTR)
LED indicator for activity and data transfer mode
Original Intel chipset, brand new, not refurbished / B-grade
Chipset: Intel X550-AT2

Scope of delivery:

EX-60222, low profile bracket, manual

SEE OFFER SEE OFFER ebay

VALUE 15992187 - Network interface card, PCIe, 5 Gigabit Ethernet, 1x RJ45 56.41 EUR High-performance PCIe adapter with an RJ-45 connector for network connections at data rates up to 5 Gbit/s

The PCIe Gen 3x1 interface allows operation with maximum full duplex throughput
Backwards compatible with Gen1/2 PCIe slots
PCIe Gen3x1 form factor
Supports standard and low-profile systems
Supports 5 different bandwidths: 5G/2.5G/1G/100M/10 Mbit/s with auto-negotiation
Runs at 5 Gbit/s over Cat. 6 cables up to 100 m
Supports Wake On LAN (WoL)
Up to 16 KB jumbo frames
Checksum and TSO offload side 4
Network ARP and NS Offload
Supports PXE boot
System requirements: Windows 11/10 (32/64 bit)
32 and 64 bit operating systems are supported

SEE OFFER SEE OFFER ebay

DIGITUS DN-10114 - Network card, PCIe, Gigabit Ethernet, 4x SFP 157.7 EUR 4 port Gigabit Ethernet network card, RJ45, PCI Express, Intel I350

The DN-10114 four port network card is the perfect solution for those who require a reliable and high-performance Gigabit Ethernet connection. With innovative power management features such as Energy Efficient Ethernet (EEE) and DMA Coalescing, it is particularly efficient and saves energy.

Halogen-free quad-port Gigabit Ethernet adapters with 4 RJ 45 Ports
Flexible I/O virtualization for port partitioning and quality of service (QoS) of up to 32 virtual ports
Scalable iSCSI performance delivering cost-effective SAN connectivity
High-performing bridgeless design supporting PCI Express* Gen 2.1 5GT/s
Reliable and proven Gigabit Ethernet technology from Intel Corporation
Controller: Intel NHI350AM4
Jumbo Frame Support:Up to 9.5 KB

The DN-10114 four port network card is the perfect solution for those who require a reliable and high-performance Gigabit Ethernet connection. With innovative power management features such as Energy Efficient Ethernet (EEE) and DMA Coalescing, it is particularly efficient and saves energy. Through flexible I/O virtualization, the DN-10114 enables port partitioning and quality of service (QoS) with up to 32 virtual ports. This provides great flexibility and allows for optimal control of the network connection. The DN-10114 also offers scalable iSCSI performance, ensuring cost-effective SAN connectivity. The high-performing bridgeless design supports PCI Express Gen 2.1 5GT/s and provides reliable Gigabit Ethernet technology from Intel Corporation. The network card is powered by the reliable Intel NHI350AM4 controller and provides a transmission rate of 10/100/1000 Mbps per port. It supports various network standards including 10BASE-T Cat3/4/5/5E/6, 100BASE-Tx Cat5/5E/6, and 1000BASE-T Cat5E/6. Jumbo frame support up to 9.5 KB ensures efficient data transfer. With an operating temperature range of 0 °C to 55 °C (32 °F to 131 °F), the DN-10114 can be used in many different environments. It features LED indicators for different transmission speeds and is powered by a PCI Express power supply (+12V±8% / +3.3V±9%). The DN-10114 is compatible with a variety of operating systems including Windows Server 2003 / 2008 /2008 R2 / 2012 /2012 R2 /2016 R2, Windows XP / Vista / 7 / 8 / 8.1 / 10, Linux Stable Kernel version 2.4.x / 2.6.x / 3.x / 4.x or later, Linux SLES 10 / 11 or later. If you require a reliable, efficient, and high-performance network connection, the DN-10114 4 port network card is the perfect solution for you.

Technical details

Halogen-free quad-port Gigabit Ethernet adapters with 4 RJ 45 Ports
Innovative power management features including Energy Efficient Ethernet (EEE) and DMA Coalescingfor increased efficiency and reduced power consumption
Flexible I/O virtualization for...
SEE OFFER SEE OFFER ebay

LANBERG LBG RSGE16 - Switch, 16-port, Gigabit Ethernet 82.25 EUR Lanberg Switch 16X 1GB Gigabit Ethernet Rack 10/19''

The switch is an indispensable active device in any network structure that uses structured cabling for transmission. The RSGE-16 is suitable for all installations: Home, business, low power, surveillance, IP, VoIP and cable TV networks.

unmanaged switch with 16 1 GBit/s ports
Metal housing
3 operating modes: Standard, VLAN, Extend
the kit enables installation in 10'' and 19'' rack cabinets

Its matching housing and the supplied brackets allow installation in server cabinets, the functions enable versatile use in any configuration, the bus and microcircuitry used ensure speed in the Gigabit Ethernet standard.

All this makes it suitable for use in demanding and extensive networks.

According to the standard, standard switches allow devices to operate up to 100 meters on a single cable run. However, sometimes it turns out that due to the extensive backbone network and complex environment, a customized solution that goes beyond the standard is required when developing the cabling and networking. This is a fairly common problem with surveillance solutions, usually due to the excessive distance between the distribution device and the end device.

Lanberg switches have a feature that allows data transmission (max. 10 Mbps) up to 250 m on a single cable section. Simply set the switch on the housing to the ''Extend 250 m'' position to ensure operation over a longer distance.

The solution was introduced for surveillance and IP and access control systems, especially when the end devices are located outdoors without the possibility of installing additional network distribution points.

VLAN is a function with a wide range of possibilities, from the separation or connection of several logical networks within another, larger physical network to the separation of ports from each other. This feature is mainly used in configurable switches, but is rarely found in low-cost, let alone unmanaged solutions.

Lanberg switches have a function that allows all standard ports to be disconnected from each other (1 ~ 14), while each port can only communicate with uplink ports (15 ~ 16). Simply set the switch on the housing to the ''VLAN'' position to ensure port separation.

The solution was introduced to ensure effective protection of devices in surveillance, alarm and access control systems. Especially where security is always paramount.

Both the switch itself and the devices connected to it are constantly exposed to various hazards, including discharges that can flow through both power and network cables.

To ensure the safety of the devices and their users, Lanberg has equipped the switch with an integrated discharge protection circuit that guarantees 2 kV protection for all ports and thus effectively reduces damage caused by...

SEE OFFER SEE OFFER ebay

LANBERG LBG RSGE24 - Switch, 24-port, Gigabit Ethernet 102.97 EUR Lanberg Switch 24X 1GB Gigabit Ethernet Rack 19''

The switch is an indispensable active device in any network structure that uses structured cabling for transmission. The RSGE-24 is suitable for all installations: Home, business, low power, surveillance, IP, VoIP and cable TV networks.

Unmanaged switch with 24 1 GBit/s ports
metal housing
three operating modes: standard, VLAN, extend
including the brackets required for mounting the switch in a 19'' rack

Its suitable housing and the brackets supplied enable installation in server cabinets, the functions enable versatile use in any configuration, the bus and microcircuit used offer speed in the Gigabit Ethernet standard.

All this makes it suitable for use in demanding and extensive networks.

According to the standard, standard switches allow devices to operate up to 100 meters on a single cable run. However, sometimes it turns out that due to the extensive backbone network and complex environment, a customized solution that goes beyond the standard is required when developing the cabling and networking. This is a fairly common problem with surveillance solutions, usually due to the excessive distance between the distribution device and the end device.

Lanberg switches have a feature that allows data transmission (max. 10 Mbps) up to 250 m on a single cable section. Simply set the switch on the housing to the ''Extend 250 m'' position to ensure operation over a longer distance.

The solution was introduced for surveillance and IP and access control systems, especially when the end devices are located outdoors without the possibility of installing additional network distributors.
\t
VLAN is a function with a wide range of possibilities, from the separation or connection of several logical networks within another, larger physical network to the separation of ports from each other. This feature is mainly used in configurable switches, but is rarely found in low-cost, let alone unmanaged solutions.

Lanberg switches have a function that allows all standard ports to be disconnected from each other (1 ~ 22), while each port can only communicate with uplink ports (23 ~ 24). Simply set the switch on the housing to the ''VLAN'' position to ensure port separation.

The solution was introduced to ensure effective protection of devices in surveillance, alarm and access control systems. Especially where security is always paramount.

Both the switch itself and the devices connected to it are constantly exposed to various hazards, including discharges that can flow through both power and network cables.

To ensure the safety of the devices and their users, Lanberg has equipped the switch with an integrated discharge protection circuit that guarantees 2 kV protection for all ports and thus effectively reduces damage caused by...

SEE OFFER SEE OFFER ebay

LANBERG LBG DSP2100812V - Switch, 8-port, Gigabit Ethernet, PoE 31.6 EUR Lanberg Switch 8X 1GB/S Gigabit Ethernet Desktop 12V

The Lanberg DSP2-1005 is a small unmanaged desktop switch equipped with 5 Gigabit Ethernet ports. The device is small and handy and works on a plug-and-play basis. The switch offers switching functions for 5 RJ-45 10/100/1000 Mbps ports as well as automatic connection negotiation and MDI-MDIX support.

5 RJ-45 10/100/1000 Mbps ports with automatic connection negotiation
Plug-and-play - the device requires no additional configuration
Support for MDI/MDIX, MAC-learning and MAC-aging
Data flow control function: Backpressure for half-duplex and IEEE 802.3x for full-duplex
Topology: Star
Protocol: CSMA/CD
MAC address table support: 2K
Switching bandwidth: 10 GBit/s
Passive cooling for quiet switch operation
Holes for wall mounting

The special feature that distinguishes the DSP1 series from the DSP2 series is the use of a universal 12-volt power supply, which is used in many other surveillance, CCTV, alarm, security and IT devices. Thanks to this solution, the end user, ISP or installer is not forced to use the factory power supply, but is completely free to decide how to supply the switch with this voltage. The advantages of using 12 volts are

Using an adapter/splitter with a 12-volt socket, the DSP2 switch can be supplied with power via the customer's PoE system and deliver data at the same time. To do this, use another switch or a device that supports the passive PoE standard with 12-volt power transmission and connect one of its LAN ports to the adapter using an Ethernet cable. If such a connection is not available on the device, also use a PoE injector. Connect the RJ-45 output socket of the splitter to the DSP2 connection with a cable and connect the socket output to the power input of the switch (diameter 5.5 * 2.1 mm). This makes it possible to transmit data and power via the same Ethernet cable in order to make the solution cost-effective and uniform and also to use it in places that are difficult to access.

12-volt power is available in alarm systems and older CCTV solutions. In such cases, a collective power supply is used, eliminating the need for an additional power supply and allowing easy replacement of the main module in the event of a failure,

There are many manufacturers on the market that offer 12-volt buffer power supplies that have a cable with a jack plug. Such small devices supply power to small devices such as routers and switches. The 12 V used in the DSP2 series allows the connection of all types of buffer power supplies to continue operating the device after a power failure,

Increased operational stability and better power efficiency of the device by using a higher voltage.

The Lanberg Switch is ideal for home use thanks to its very small size and the use of passive cooling. The...

SEE OFFER SEE OFFER ebay

LANBERG LBG DSP11008 - Switch, 8-port, Gigabit Ethernet 30.61 EUR Lanberg Switch 8X 1GB/S Gigabit Ethernet Desktop 5V

The Lanberg DSP1-1008 is a small unmanaged desktop switch equipped with 8 Gigabit Ethernet ports. The device is small and handy and works on a plug-and-play basis. The switch offers switching functions for 8 RJ-45 10/100/1000 Mbps ports as well as automatic connection negotiation and MDI-MDIX support.

8 RJ-45 10/100/1000 Mbps ports with automatic connection negotiation
Plug-and-play - the device requires no additional configuration
Support for MDI/MDIX, MAC-learning and MAC-aging
Data flow control function: Backpressure for half-duplex and IEEE 802.3x for full-duplex
Topology: Star
Protocol: CSMA/CD
MAC address table support: 4K
Switching bandwidth: 16.0 GBit/s
Passive cooling for quiet switch operation
Holes for wall mounting

The Lanberg switch is ideal for home use thanks to its very small size and the use of quiet cooling. The black color scheme and the elegant, slim housing ensure that the device fits into almost any interior. The device is suitable for office applications, including SOHO and SMB. The switch also offers adequate performance to meet the needs of users in the switch segment.

The function to automatically detect and adapt to the type of network cable to be connected (straight or crossover) eliminates the need for only one type of cabling and uplink ports, reducing unnecessary costs at the same time. The switch supports half-duplex and full-duplex modes for connections between devices. With the flow control function, you can control the data flow and thus avoid overloading the ports if one of the receiving devices cannot receive enough data.

The Lanberg switch guarantees a combination of high quality, automation and a range of functions that ensure the operation of the device without unnecessary user intervention.

SEE OFFER SEE OFFER ebay

LANBERG LBG PCE1GB201 - Network card, PCIe, Gigabit Ethernet, RJ45

Comparison of Similar Products