Network cards
The Best
• Complies with the standards IEEE802.3ab and IEEE802.3z.
• FX-port toggles between force and auto mode.
• Fibre-optic transmission distance of up to 15 km
The MC210CS is a media converter designed for converting 1000BASE-LX/LH fibre media into 1000Base-T copper media and vice versa. The MC210CS was designed according to the 1000Base-T standard (IEEE802.3ab) and the 1000Base-LX/LH standard (IEEE802.3z) and is intended for use with single fibre-optic cables and the SC plug. The MC210CS supports the long-wave (LX) laser specification for a transfer rate corresponding to the full bandwidth. It functions at 1310nm for both transmitting and receiving data.
Other features of this module include: the option of using the device as a stand-alone device (no enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, and status LED on the front. The MC210CS transmits inn fibre-optic long distance mode via the single mode fibre-optic cable over a distance of up to 15 km.
• Works at 1000 Mbps for both the TX port and also for the FX port in full duplex mode.
• TX port with support for auto MDI/MDIX
• Provides the switch configurations for force mode and auto transfer modes for the FX-port
• Fibre-optic transmission distance of up to 15 km.
• Easily visible LEDs display the status, allowing the network to be easily monitored.
• External power supply unit.
Top Pick
- Expand the Connectivity
- Compact and Portable Design
- Fast and Stable Data Connection
- Plug & Play with increased compatibility
Expand the Connectivity
UE200 adds Ethernet network connectivity to those devices without Ethernet LAN port, such as Ultrabook or Macbook Air, through a commonly used USB 2.0 port, also being backward compatible with USB 1.1 standard.
Compact and Portable Design
Innovative folding design makes UE200 an ideal gadget on the go.
Fast and Stable Data Connection
Equipped with USB 2.0 port and 100Mbps Ethernet port, UE200 enables your device a fast and stable data connection to Ethernet network.
Plug & Play with Increased Compatibility
UE200 supports Plug and Play feature for devices running Windows (Windows XP/Vista/7/8/8.1/10), Mac OS X (10.6/10.7/10.8/10.9/10.10) and Linux OS, also being capable of working well with Mac OS X 10.11 while driver is needed.
Excellent
- 1x RJ45 Gigabit Ethernet
- 1x 32-bit PCIe
System requirement
- Supports Windows 10/8.1/8/7/Vista/XP
Space-saving use
Compared to the normal pluggable network card, the TG-3468 is also suitable for mini-tower computers.
Energy and power efficient
With Wake-on-LAN, your network equipment is particularly efficient to manage and centrally control.
Your network card is automatically set to operating mode when signals are transmitted.
Scope of delivery:
- Gigabit PCI Express network adapter TG-3468
- Quick start guide
- Driver
- Low-profile bezel
Recommended
- 1x PCI Express 2.1 x 1
- 1x RJ45 2.5 Gigabit Ethernet Port
Incredible 2.5G Networking
2.5 Gigabit Ethernet reaches blazing-fast data rates up to 2.5 billion bits per second—2.5× faster than standard Gigabit Ethernet.
For bandwidth-intensive tasks, whether local data transfer or Internet access, the TX201 is up to the task.
Household Storage, Share in Seconds
For local connections, a 2.5G PCIe adapter helps build a lightning fast transport channel between a central storage device and other working machines in your local network.
Local data transmissions will be a breeze for you as you handle bandwidth-intensive tasks easily at your home or office.
2.5G Extremely Fast Internet Response
With 2.5 Gbps internet access, your gaming will be fully optimized with a large boost in speed, latency, and responsiveness.
Large-sized game downloads, seamless live streaming, and massive data backups via the cloud are as easy as choosing your character.
Versatile, Multi-Speed Compatibility
2.5G Base-T is backwards compatible with multiple data rates, including 2.5 Gbps, 1 Gbps, 100 Mbps and 10 Mbps Base-T connectivity.
The 2.5G Ethernet port automatically negotiates between higher and lower speed connections, allowing you to upgrade to 2.5G networking smoothly.
QoS Support
Quality of Service technology ensures enough bandwidth and avoids network congestion.
Whether streaming or real-time gaming, enjoy a smooth web experience.
Package Contents:
- 2.5 Gigabit PCIe Network Adapter (TX201)
- Standard/Low-Profile Brackets
- Quick Installation Guide
- Resource CD
Featured
Upgrade to 10G Networking
10 Gigabit Ethernet reaches blazing-fast data rates up to 10 billion bits per second—10× faster than standard Gigabit Ethernet.
It’s a brand-new era for all your bandwidth-intensive tasks from local data transfers to internet access.
- 10 Gbps Internet Access
Make Full Use of Your High-Speed Internet Access - 10 Gbps NAS Connection
Lightning-Fast Local Data Transmissions - 10 Gbps Host Server Building
High Hardware Configuration for a Powerful Server
Play Never Ends with 10G
With 10 Gbps internet access, your gaming will be fully optimized with a large boost in speed, latency, and responsiveness.
Large-sized game downloads, seamless live streaming, and massive data backups via the cloud are as easy as choosing your character.
Local Data Transmissions in Seconds
For local connections, a 10G PCIe adapter helps build a lightning fast transport channel between a central server and other working machines in your local network.
Local data transmissions will be a breeze for you as you handle bandwidth-intensive tasks easily at your home or office.
Versatile, Multi-Speed Compatibility
10GBase-T is backwards compatible with multiple data rates, including 10 Gbps, 5 Gbps, 2.5 Gbps, 1 Gbps, and 100 Mbps Base-T connectivity.
The 10G Ethernet port automatically negotiates between higher and lower speed connections, allowing you to upgrade to 10G networking smoothly.
QoS Support - A Bandwidth Buff for Gaming
Quality of Service technology ensures enough bandwidth and avoids network congestion for PC gaming.
It delivers prioritized performance for gamers.
Strengthened PCI Express 3.0 ×4
Supports PCI Express Gen3 ×4 for more efficient data transmissions
Easy Setup
Simple software installation with the intuitive Utility on the provided CD
Comprehensive System Support
Fully compatible with Windows 10/8.1/8/7, Windows Servers 2019/2016/2012 R2, Linux.
Package Contents
- Standard/Low-Profile Brackets
- Quick Installation Guide
- Resource CD
- 1.5 m CAT6A Ethernet Cable
Alternative
Assembled double shielded (PiMF) category 6A network cable with shielded RJ-45 connectors on both sides.
Suitable as a patch cord in patch panels or as a device connection cable and intended for LAN applications.
100% Component Level Tested.
- Assembled double shielded twisted pair patch cable
- With shielded RJ-45 connectors on both sides
- For use in 10 Gigabit Ethernet networks
- High-quality gold-plated contacts
- Durable thanks to molded bend protection
- Contact assignment 8 cores 1:1 according to EIA/TIA568
- Construction: Cable type S/FTP, 8 cores stranded wire
- Pair shielding in alu-laminated polyester foil
- Overall shielding: tinned copper braid
- Impedance: 100 Ohm
- Halogen-free, flame-retardant, low-smoke
These connection or patch cables for structured building cabling offer Cat.6A component-level quality, meaning they have passed the demanding component testing for Category 6A.
Specification
- Connectors:
external: 1 x 10 Gigabit LAN RJ45 jack
internal: 1 x PCI Express x2, V3.0 - Chipset: Marvell AQC113CS
- Data transfer rate:
Ethernet up to 10 Mbps
Fast Ethernet up to 100 Mbps
Gigabit Ethernet up to 1 Gbps
NBASE-T with up to 2.5 Gbps and 5 Gbps
10 Gigabit Ethernet up to 10 Gbps
PCI Express x2 up to 16 Gbps - Supports IEEE 802.3az (Energy Efficient Ethernet)
- Supports 16k Jumbo Frames
- Supports IEEE 802.1Q Virtual LAN (VLAN)
- Supports PXE
- LED indicator for link and activity
System requirements
- Linux Kernel 3.10 or above
- Windows 8.1/8.1-64/10/10-64
- PC with one free PCI Express x2 / x4 / x8 / x16 / x32 slot
Package content
- PCI Express card
- Low profile bracket
- Driver CD
- User manual
Package
- Box
Specification
- Connectors external: 1 x Gigabit LAN RJ45 jack
- Connectors internal: 1 x PCI Express x1, V1.1
- Chipset: Realtek RTL8111H
- LED indicator for link and activity
- Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
- Supports Wake On LAN (WOL)
- Supports 9k Jumbo Frames
- Supports IEEE 802.3az (Energy Efficient Ethernet)
- Supports IEEE 802.1P layer 2 priority encoding
- Supports IEEE 802.3x full duplex flow control
- Supports IEEE 802.1Q Virtual LAN (VLAN)
Data transfer rate:
- Ethernet up to 10 Mbps (Half/Full Duplex)
- Fast Ethernet up to 100 Mbps (Half/Full Duplex)
- Gigabit Ethernet up to 1000 Mbps (Half/Full Duplex)
- PCI Express x1 up to 2.5 Gbps
System requirements
- Linux Kernel 3.2 or above
- Windows 8.1/8.1-64/10/10-64
- PC with one free PCI Express slot
Package content
- PCI Express card
- Low profile bracket
- Driver CD
- User manual
Specification
• Connectors:
external:
2 x Gigabit LAN RJ45 jack
internal:
1 x PCI Express x1, V2.0
• Chipset: Intel 82576
• Data transfer rate:
Ethernet up to 10 Mbps
Fast Ethernet up to 100 Mbps
Gigabit Ethernet up to 1000 Mbps
PCI Express x1 up to 4 Gbps
• Supports IEEE 802.3 / 802.3u / 802.3z / 802.3ab
• Supports IEEE 802.3az (Energy Efficient Ethernet)
• Supports Wake On LAN (WOL)
• Supports IEEE 802.1Q Virtual LAN (VLAN)
• Supports 9k Jumbo Frames
• Supports PXE
System requirements
• Windows 7/7-64/8.1/8.1-64/10/10-64
• Linux Kernel 2.6 or above
• PC with one free PCI Express slot
Package content
• PCI Express card
• Low profile bracket
• Driver CD
• User manual
Package
• Retail Box
The Gigabit Network Management Card (Network-M3) is Eaton's UPS communications option that offers IT professionals exciting capabilities and features.
With enhanced performance and cyber security, the Gigabit Network Card optimizes business continuity in two ways: by alerting administrators of impending problems and by supporting the proper shutdown of servers and storage systems.
Web/SNMP communication for remote UPS monitoring and automatic server shutdowns.
Complies with the IEC 62443-4-2 and UL 2900-2-2 cyber security standards.
Gigabit network management card for the following EATON UPS models with mini slot
- 5P
- 5SC Rack
- 5PX
- 9SX
- 9PX
- 91HP
- 93HP
- 93PX
- 93E
- EATS16N
Specification
- Connectors:
external: 2 x Gigabit LAN RJ45 jack
internal: 1 x PCI Express x1, V2.0 - Chipset: Realtek RTL8111H
- Data transfer rate:
Ethernet up to 10 Mbps (Half/Full Duplex)
Fast Ethernet up to 100 Mbps (Half/Full Duplex)
Gigabit Ethernet up to 1000 Mbps (Half/Full Duplex)
PCI Express x1 up to 4 Gbps - Supports IEEE 802.3 / 802.3u / 802.3ab
- Supports Wake On LAN (WOL)
- Supports IEEE 802.1P layer 2 priority encoding
- Supports IEEE 802.3x full duplex flow control
- Supports IEEE 802.1Q Virtual LAN (VLAN)
- Supports 9k Jumbo Frames
- LED indicator for link and activity
System requirements
- Windows 8.1/8.1-64/10/10-64/11
- PC with one free PCI Express slot
Package content
- PCI Express card
- Low profile bracket
- User manual
Package
- Retail Box
Key Features
- Host Interface standard support PCI Express 2.0a
- Independently Fibre Gigabit Ethernet channel/s support Gigabit Ethernet 1000Base-SX
- Ultra deep packet buffer per channel lowers CPU utilization
- Hardware acceleration that can offload tasks from the host processor. The controllers can offload TCP/UDP/IP checksum
- Calculations and TCP segmentation
Der 10 Gigabit PCIe SFP+ Netzwerkadapter von TRENDnet, Modell TEG-10GECSFP, verwandelt einen unbelegten PCI Express Slot in einen 10 Gigabit SFP+ Slot. Fortgeschrittene Funktionen unterstützen Jumbo Frame und VLAN Tagging. Die inbegriffenen Standard- und flache Halteklammern sind kompatibel mit Windows® und Linux® Desktop-Computern.
- Konvertiert einen PCIe Slot zu einem 10G SFP+ Slot
- Unterstützt 802.1Q VLAN Tagging
- Standard- und flache Halteklammern inbegriffen
- Unterstützt Windows® und Linux®
PCI Express adapter with 1x RJ45 socket
- Chipset: Broadcom RTL8111C
- Data transfer rate: Ethernet up to 10 Mb/s (half/full duplex), Fast Ethernet up to 100 Mb/s (half/full duplex), Gigabit Ethernet up to 1000 Mb/s (half/full duplex)
- Supports Wake on Lan (WoL)
- Supports IEEE 802.3x full duplex flow control
- Low profile bracket
- Plug and Play
- Dimensions: 63 x 40 x 19 mm
- Operating temperature: 0 -70°C, Relative humidity: 10%-90% (non-condensing), Storage temperature: -0 -80°C
Boost the performance of your PC with an instant WiFi upgrade to the latest tri-band WiFi 6E technology.
Enjoy faster and more reliable WiFi for ultimate 4K/8K streaming, smooth video conferences, & online gaming.
- Works with all standard WiFi networks
- Super-speed USB 3.0 port, up to 10x faster connection than USB 2.0
- New WiFi 6E enables blazing-fast speeds & more reliable connections
- Easy setup using the USB 2.0 or 3.0 port on your Windows® 10 & 11 PCs
- Automatically connects to the fastest WiFi available: 2.4GHz, 5GHz, or 6GHz band
Note: For connecting to the 6GHz WiFi band, Microsoft Windows 11 is required. Microsoft Windows 10 only supports the 2.4 & 5GHz bands.
- USB 3.0
- 867 Mbps (5 GHz)
- 300 Mbps (2.4 GHz)
- Integrated 2 dBi antenna
- Detachable 5 dBi antenna
The AC1300 MU-MIMO Wi-Fi USB Adapter delivers powerful Wireless AC technology to your desktop or notebook computer.
Simply plug the adapter into an available USB port and connect to a wireless network to access a secure, high-speed Internet connection over the 2.4 GHz (400 Mbps) or 5 GHz (up to 867 Mbps) bands.
In addition, the detachable high-gain antenna provides extended range to give you a faster and more reliable connection.
MU-MIMO support allows you to get the most from any Wireless AC Wave 2 routers for optimised network efficiency and performance.
802.11ac Wave 2 for Improved Performance
The AC1300 MU-MIMO Wi-Fi USB Adapter features the updated 802.11ac Wave 2 specification, which improves on the bandwidth and speed of 802.11ac Wave 1.
The new and improved specification increases maximum speed for the 5 GHz band and adds more channels for a faster connection and less RF interference.
Interference-Free Bandwidth
The AC1300 MU-MIMO Wi-Fi USB Adapter delivers Dual Band MU-MIMO technology to your home network for intelligent, versatile, interference-free bandwidth.
Check your email, surf the Internet on the 2.4 GHz band, or play online games, make VoIP calls, and stream HD movies to multiple devices using the cleaner, interference-free 5 GHz band.
USB 3.0 for Maximum Data Transfer Speeds
The AC1300 MU-MIMO Wi-Fi USB Adapter also supports the high-speed USB 3.0 specification.
When connected to a compatible USB 3.0 device and using the 5 GHz wireless band, the device will automatically switch to USB 3.0 mode, allowing you to achieve the highest possible data transfer rates and fully utilise the speed benefits of the Wireless AC Wave 2 standard.
The Club 3D CAC-1420 USB 3.2 Gen1 Type A to RJ45 2.5 Gigabit Ethernet Adapter provides a fast Ethernet network connection for desktops, notebooks or ultrabooks with a standard USB 3.2 Gen 1 Type A port.
- Supports USB 3.2 Gen 1 Type A port and 2.5GBit/s RJ45 output
- Supports 10M/100M/1G/2.5G bandwidth
- Supports twisted pair crossover detection and auto-correction
- USB bus power (No external power required)
- Supports USB3.2 Gen1, USB 2.0 and USB 1.1 (If an older USB version is used, it will affect the Ethernet speed)
- Supports WOL (Wake-On-Lan) Full Duplex Flow (10M / 100M / 1G / 2.5G Rate) Auto Negotiation
- Supports Windows / Mac OsX 10.6 ibs 10.15. Note: Driver installation is required
- Power consumption : 4.75V ~ 5.25V
- Normal consumption : < 80mA 10M < 130mA 100M <300mA 1G <460mA 2.5G
This adapter is the best solution for the latest products without onboard Ethernet port. The Ethernet port delivers up to 2.5 Gigabit Ethernet.
It is the perfect accessory for your travels and is USB powered so no additional power adapter is needed.
NBASE-T for higher speed
Modern services and new technologies require higher bandwidths. NBASE-T technology enables speeds of 1 Gbps and 2.5 Gbps with conventional networking cables. The best possible transmission rate is set automatically.
Specification
- Connectors:
external: 2 x 2.5 Gigabit LAN RJ45 jack
internal: 1 x PCI Express x2, V2.1 - Chipset: Realtek RTL8125
- Data transfer rate:
Ethernet up to 10 Mbps (Half/Full Duplex)
Fast Ethernet up to 100 Mbps (Half/Full Duplex)
Gigabit Ethernet up to 1000 Mbps (Half/Full Duplex)
NBASE-T with up to 2.5 Gbps (Half/Full Duplex)
PCI Express x2 up to 8 Gbps - Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
- Supports Wake On LAN (WOL)
- Supports IEEE 802.1P layer 2 priority encoding
- Supports IEEE 802.3x full duplex flow control
- Supports IEEE 802.1Q Virtual LAN (VLAN)
- Supports 16k Jumbo Frames
- Supports PXE
- LED indicator for power and activity
System requirements
- Linux Kernel 4.x or above
- Windows 8.1/8.1-64/10/10-64
- PC with one free PCI Express x2 / x4 / x8 / x16 / x32 slot
Package content
- PCI Express card
- Low profile bracket
- Driver CD
- User manual
Package
- Box
NBASE-T for higher speed
Modern services and new technologies require higher bandwidths. NBASE-T technology enables speeds of 1 Gbps and 2.5 Gbps with conventional networking cables. The best possible transmission rate is set automatically.
Specification
- Connectors:
external: 1 x 2.5 Gigabit LAN RJ45 jack
internal: 1 x PCI Express x1, V2.1 - Chipset: Intel i225V
- Data transfer rate:
Ethernet up to 10 Mbps
Fast Ethernet up to 100 Mbps
Gigabit Ethernet up to 1000 Mbps
NBASE-T with up to 2.5 Gbps
PCI Express x1 up to 4 Gbps - Supports IEEE 802.3 / 802.3u / 802.3z / 802.3ab
- Supports IEEE 802.1Q Virtual LAN (VLAN)
- Supports Wake On LAN (WOL)
- Supports 9k Jumbo Frames
- Supports PXE
- LED indicator for link and activity
System requirements
- Linux Kernel 5.8 or above
- Windows 10-64
- PC with one free PCI Express slot
Package content
- PCI Express card
- Low profile bracket
- Driver CD
- User manual
Package
- Retail Box
The Lanberg NC-0150-WI wireless WiFi nano USB 2.0 network card is a modern solution that enables a stable and fast Wi-Fi connection to devices that work according to the IEEE 802.11 b/g/n standard.
It is the ideal choice for home and office use and enables easy collaboration with nearby routers, access points and repeaters. The adapter is designed to work with transmitting devices in close proximity. Thanks to its ultra-small size and compact design, the adapter is not only practical but also easy to transport and enables continuous operation without the need to remove it from the USB port
- Nano size for greater mobility of the device
- Easy installation and configuration with the drivers supplied on the CD
- Support for WEP, WPA and WPA2 encryption
- Support for WPS 2.0, WPS-PIN, WPS-PBC
Extends your PC with PCIe slot by 2 Gigabit Ethernet ports with 1000 Mbit/s each
- The PCI-Express Dual-Port LAN card with JL82575EB chipset from Intel for X-1 interfaces can be installed in PCs and servers - The required drivers are included on CD
- The two RJ-45 ports of the network card comply with the IEEE802.3/u/ab standards and transmit up to 1-Gbps - Downward compatible to 10/100/1000 MBit/s
- In addition to IPv4 & IPv6 protocols, the card supports RSS (Receive side scaling), VMDq (8VMs), Jumbo Frames up to 9.5k as well as Layer 2 functions such as IEEE802.1q VLAN and IEEE802.3x Flow Control
- Thanks to optional low-profile slot bezel and various configuration options, the LAN-Card can be ideally used for virtual machines or for setting up routers and firewalls
Package contents:
- Dual Gigabit Ethernet PCI Express card, 2-port.
- low-profile slot bracket
- Driver on CD
- QIG
A Wi-Fi 6E and Bluetooth PCI-E adapter built on an AX210 Intel module with a heatsink and two antennas on a magnetic base. Install it to equip your Windows 11 Intel-based PC with advanced wireless connectivity.
• Tri-Band Wi-Fi 6E
• 2.4Gbps + 2.4Gbps + 574Mbps /s + 574 Mbit/s WiFi
• Bluetooth 5.3
• Intel AX210 module
• Works on Windows 10/11 64-bit
• Heat sink
Dual and Quad-port 10GbE adapters with Hardware Optimization and Offloads for the Rapid Provisioning of Networks in an Agile Data Center
- PCI Express* (PCIe) v3.0, x8
- Network Virtualization offloads including VXLAN, GENEVE, NVGRE, MPLS, and VXLAN-GPE with Network Service Headers (NSH)
- Intel® Ethernet Flow Director for hardware based application traffic steering
- Data Plane Development Kit (DPDK) optimized for efficient packet processing
- Excellent small packet performance for network appliances and Network Functions Virtualization (NFV)
- Intelligent offloads to enable high performance on servers with Intel® Xeon® Processors
- I/O virtualization innovations for maximum performance in a virtualized server
The Intel® Ethernet Converged Network adapter X710 addresses the demanding needs of an agile data center by providing unmatched features for both server and network virtualization, flexibilty for LAN and SAN networks, and proven, reliable performance.
The Intel® Ethernet 700 Series Network Adapters. These adapters are the foundation for server connectivity, providing broad interoperability, critical performance optimizations, and increased agility for Telecommunications, Cloud, and Enterprise IT network solutions.
Interoperability
Multiple speeds and media types for broad compatibility backed by extensive testing and validation.
Optimization
Intelligent offloads and accelerators to unlock network performance in servers with Intel® Xeon® processors.
Agility
Both Kernel and Data Plane Development Kit (DPDK) drivers for scalable packet processing.
Built on more than 35 years of continuous Ethernet innovations, the Intel® Ethernet 700 Series delivers networking performance across a wide range of network port speeds through intelligent offloads, sophisticated packet processing, and quality open source drivers.
- 1x RJ45 Gigabit Ethernet
- 1x USB 3.0 type A
- 1x USB 2.0 type A
- Dualband WLAN
Wireless USB 3.0 device server with enterprise security and IPv4/IPv6 support
With the Silex DS-700 you can easily integrate USB devices into a network and share them over the network.
Printers, scanners, hard drives, dongles, card readers and other USB devices become network-enabled.
This allows the USB device to be placed anywhere on the network without a direct computer connection.
In addition, multiple users can access the USB device in succession.
Enterprise security for Wi-Fi networks
The DS-700AC supports WPA3-Enterprise security to make your wireless network extra secure, but of course it also supports older Wi-Fi security standards like WPA/WPA2-Enterprise.
Home users can also protect themselves with WPA/WPA2/WPA3-Personal.
Sharing devices from two different networks
Office devices deployed on one network can now be simultaneously connected to another network.
Both networks remain isolated.
This is made possible by the DS-700AC's ability to convert a USB device port on the device into a local network port.
High data bandwidth
The DS-700AC's USB 3 SuperSpeed port provides higher bandwidth over Gigabit Ethernet LAN than the traditional USB 2.0 device server.
This ensures an especially fast data
High Data Bandwidth
The DS-700AC's USB 3 SuperSpeed port provides higher bandwidth over Gigabit Ethernet LAN than the traditional USB 2.0 device server.
This ensures extra fast data transfer.
Support for ischronous transfer
USB devices such as webcams or speakers that use isochronous transmission can be connected to the network.
Support for standard TCP/IP printing (LPR/RAW)
The DS-700AC acts as a print server when a printer is connected.
The print server supports two common network printing protocols, RAW and LPR print modes.
SX Virtual Link
SX Virtual Link is software for network access to USB devices connected to the USB device server.
Using SX Virtual Link, you can connect or disconnect a remote USB device and request that another user share a device for their own use.
Simple configuration for quick installation
Configuring the DS-700 is quick and easy using the Device Server Setup utility, an integrated configuration web page, or AMC Manager®.
Package contents:
- 1x DS-700AC
- 1x power supply unit
- 1x manual
Intel Ethernet server adapter I350-T4 - network adapter - PCI Express 2.1 x4 low profile - Ethernet, Fast Ethernet, Gigabit Ethernet - 10Base-T, 100Base-TX, 1000Base-T - 4 ports
Ideal for small and medium-sized virtualised server environments
• Four 10/100/1000 Base-T Ethernet ports
• Very low energy consumption due to DMA coalescing
• HW optimisation for virtual environments by VDMq
• Distribution of a physical port to up to eight virtual ports
• iSCSI Boot for flexibility
• PCI Express 2.1 5 GT/s supported
• Halogen-free and lead-free cards
-Further technical details available on the data sheet-
- Ideal when AC power is not available
- Distance support: up to 100 m (328 ft.)
- Power output of up to 15.4 Watts
- Supports all IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras)
- Supports IEEE 802.3af detection and short circuit, overload and high-voltage protection
- Full-power Class 3 PoE design
- Fanless design ideal for silent operation
- Three-Year Warranty
The INTELLINET NETWORK SOLUTIONS Power over Ethernet Injector allows you to connect your IEEE 802.3af-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af powered device (PD) to a switch.
Reduce Wiring Costs
No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.
Preserve Existing Investments
Does your existing LAN switch not support the new IEEE 802.3af PoE standard? Well, don’t let that stop you from realizing the benefits of delivering DC power over the existing Cat5 Ethernet cabling. Use the Model 503389 PoE Injector until you are able to upgrade your LAN switch to a model that supports the IEEE 802.3af PoE standard.
Protect Your Equipment
Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that the products are protected from power problems. The PoE Injector was designed to protect equipment from short circuits (short GRND), current overloads (over 450 mA) and high voltages (voltage exceeding 52 V).
- A single 10/100/1000MBit/s compatible RJ45 Ethernet port
- Gigabit detection and Link/Activity LED indicators
- Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x and IEEE 802.3ab standards
- Supports IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding and IEEE 802.3x Full Duplex Flow Control
- Jumbo frame support
The ST1000SPEX2L Low-Profile PCIe Gigabit Network Card adds a 10/100/1000 MBit/s compatible RJ45 Ethernet port to a PCI Express-enabled client, server or workstation, providing a convenient addition or replacement networking interface.
Compliant with IEEE 802.3/u/ab standards, and with support for 9K Jumbo Frames, VLAN tagging and Wake on LAN (WOL), this versatile Gigabit NIC/Server Adapter offers effective network performance.
The card comes pre-configured with a low-profile/half-height installation bracket and includes a standard profile bracket for installation in a wide range of computer/server chassis, regardless of form factor.
Intel continues to be worthy of its leading role with the latest generation of PCIe* GbE network adapters.
This adapter is based on the Intel® Gigabit Ethernet Controller I210 and represents the next evolutionary step in the GbE network technology for companies and data centres.
It provides support for audio video bridging (AVB) and uses energy management technologies such as Energy Efficient Ethernet (EEE) and DMA Coalescing (DMAC).
• PCI Express 2.1
• Low profile
• 10 MB LAN, 100 MB LAN, Gigabit LAN, 10Base-T, 100Base-TX, 1000Base-T
TRENDnet's 10 Gigabit PCIe network adapter transforms an unused PCI Express slot into a 10 Gigabit Ethernet port.
- Converts a PCIe slot to a 10 G Ethernet port
- Supports 802.1Q VLAN tagging
- Standard and flat retaining clips included
- Supports Windows® and Linux®.
Supports five selectable speeds:
- 10 Gbps
- 5 Gbps
- 2.5 Gbps
- 1 Gbps
- 100 Mbps
jumbo frame
Sends larger packets or Jumbo Frames (up to 16 KB) for better performance
Scope of delivery:
- TEG-10GECTX
- Quick Installation Guide
- CD-ROM (driver and user manual)
- Standard and flat retaining clamps
Connect Homey Pro (Early 2023) to your wired Ethernet LAN with the Homey Pro Ethernet Adapter.
- Made for Homey Pro (Early 2023)
- Designed to be out of sight
- Blazingly fast — up to 480 Mbps
Connect Homey Pro (Early 2023) to your wired Ethernet LAN with the Homey Pro Ethernet Adapter. With fast speeds up to 480 Mbps and USB-C power pass-through, the Homey Pro Ethernet Adapter is designed to be out of sight and out of mind. It just works.
Because of its USB plug and play capability, all you need to do is plug in the cables and the connection is immediately available. With dual-speed support for Ethernet and Fast Ethernet, the adapter can automatically detect connection speeds of 10Mbps and automatically adjust full- and half-duplex operation accordingly. This allows you to access databases, send files and e-mail, and share printers, scanners, and other devices on a network.
- High-speed transmission rate of 480 Mbps
- Complies with USB 2.0 and 1.1 specifications
- Backwards compatible with USB 1.1
- 10Mbps Ethernet Adapter Twisted pair (RJ-45)
- USB-Type B upstream port for connection to PC, notebook or USB hub
- Full-Duplex Support
- 1.8 m USB a-to-B cable included
- USB Plug & Play
- Hot-swappable
- Energy-Saving Suspend/Resume Function
- Multi-Megabit Burst Data Transfer Rate
- 2x 3 dbi Detachable high gain antenna (connector: RP-SMA)
- IEEE802.11b, 802.11g, 802.11n
- 2.4 GHz: 300 Mbps
The EW-7612PIn is a wireless PCI Express adapter that provides a simple and easy way to wirelessly connect or upgrade your PC.
This wireless PCI Express adapter supports data transfer speeds of up to 300 Mbps when connected to an 802.11n standard wireless device.
You can also connect it to any public WLAN access point to the Internet to find emails, browse the websites or use instant messaging.
The EW-7612PIn gives you the freedom to connect to the network.
Meets 802.11b/g/n wireless standards with data transfer speeds of up to 300 Mbps
With the latest 802.11n wireless technology, the EW-7612PIn can extend the range up to 4 times and reduce the ''blind spots'' within the wireless range.
The data transmission speed can reach up to 300 Mbps when connected to 802.11n standard wireless devices, transmitting signals faster compared to 802.11b/g standard wireless network and guaranteeing wireless connections.
First-class reliability
The EW-7612PIn's exceptional chipset provides increased bandwidth and more features than other standard PCI network adapters.
The adapter is specifically designed to carry the full 2.5 Gbps PCI Express bus bandwidth, eliminating collisions and latency that exist with current 32- and 64-bit PCI bus architectures.
Wireless security
TheEW-7612PIn supports 64-/128-bit WEP data encryption, which protects your wireless network from eavesdropping.
It also supports WPA (Wi-Fi Protected Access), which combines IEEE 802.1x and TKIP (Temporal Key Integrity Protocol) technologies.
Furthermore, this adapter supports WPA2 and WPS functions. WPA2 provides a stronger encryption mechanism through AES (Advanced Encryption Standard), which is required by some corporate and government users.
Wi-Fi Protected Setup (WPS) is a standard for easily and securely establishing a wireless network.
The EW-7612PIn supports software with WPS-compatible configurations.
When both ends of the WLAN connection use the wireless solution with WPS, the wireless network is automatically configured with robust WPA data encryption and authentication.
Supports multi-language EZMax setup wizard
The included 16-language EZmax Setup Wizard and friendly user interface guide you through configuring the EW-7612PIn to your wireless network.
* EZMax Setup CD Wizard supports Edimax wireless devices only.
The Gigabit PCI Express network card is a high-performance network adapter. The PCI Express interface offers a higher bandwidth than standard 32 or 64 bit PCI interfaces. With the INTELLINET NETWORK SOLUTIONS Gigabit PCI Express network card, you can use Gigabit transmission speeds over your existing copper network cabling.
- Supports gigabit speeds
- Does not require fiber optic cable for gigabit speeds
- The PCI Express 1.0a interface fits into 1.4,8, and 16x PCI-E slots
- One PCI Express Lane (x1) 2.5 Gbit/s interface
- Full-duplex Flow Control (IEEE 802.3x)
- Supports jumbo frames up to 9 kB
- Supports full duplex (20 Mbps, 200 Mbps, 2000 Mbps)
- 8 cm low-profile bracket included
- Supports Wake on LAN (WOL)
- Supports the most common operating systems: Windows XP, Vista and Windows 7/8
Faster Throughput
The card provides throughput rates up to 2 Gbps when operating in full-duplex mode. This is ideal for data-intensive applications such as CAD/CAM, client-server databases, multimedia, graphics, servers and similar applications.
Auto-Detection
The card automatically detects the speed on the LAN switch port and switches to the same speed. The card supports 10Base-T Ethernet, 100Base-TX Fast Ethernet and 1000Base-T Gigabit Ethernet.
Full Duplex
In full-duplex mode, the card supports 20 Mbps (10Base-T Ethernet), 200 Mbps (100Base-TX Fast Ethernet), and 2 Gbps (1000Base-T Gigabit Ethernet).
Built-In Diagnostics
The Gigabit PCI Express card comes with crossover detection and auto-correction, making installation and maintenance a snap.
Remote Power On
The Wake-on-LAN functionality allows you to power on the PC from any location.
With the EX-1330M you can integrate your Windows, Linux or MAC Computer/Notebook via the USB 3.0 with A- or C-female port in the same time to four 10/100/1000Mbps network or internet. The EX-1330M can be installed in the same time with an existing network card and offer you then four additional 1Gigabit ports. The installation is very easy and it is not necessary to open the system. The EX-1330M has a metal housing and it’s include the adapter EX-47990 with C-male to A-female connector.
- support 100/1000/10000 Base-T Ethernet standards
- support Auto-MDI/MDI-X Auto (for Crossover cable)
- support Jumbo Frame up to 16Kbytes
- EEE (Energy Efficient Ethernet)
- Wake-on-LAN and Remote Wake-up
- support Full Duplex Flow Control (IEEE 802.3x)
- support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging,
- IEEE 802.1P Layer 2 Priority Encoding
- virtual NIC support
- Activity LED to check the data transfer
- Standard CAT-6A cabling with RJ45 connector
- Chip-Set: Realtek RTL8153B
The DPE-101GI Gigabit PoE Injector is designed to transmit data and up to 15 watts of electrical power to PoE-enabled devices such as network cameras and wireless access points. It meets the requirements of the IEEE 802.3af (PoE) standards.
The DPE-101GI is ideal for powering network devices such as professional pan, tilt and zoom network cameras or integrated heating/cooling or the latest WLAN access points that support the high data throughput according to Standard 802.11ac.
Power supply via the existing network cabling
The DPE-101GI gives you the ability to mount your PoE device virtually anywhere in a building, whether it's on ceilings or near entrances, because there's no need for a nearby power outlet.
The D-Link DPE-101GI combines power and Gigabit network connectivity. The generated Gigabit PoE signal can be transmitted up to 100 meters over a single Ethernet cable.
PoE & data port (output)
- Supports Half/Full Duplex Operation
- 10/100/1000BASE-T port
- IEEE 802.3 compliant
- IEEE 802.3u compliant
- IEEE 802.3ab compliant
- IEEE 802.3af compliant
Data Port (Input)
- Supports Half/Full Duplex Operation
- IEEE 802.3 compliant
- IEEE 802.3u compliant
- IEEE 802.3ab compliant
- 10/100/1000BASE-T port
LED indicators
- Blue: Operating
- Green-connected to the network
Environmental Conditions
- Dimensions (L x W x H)
- 109.8 x 62.2 x 24.5 mm
Weight
- 65 g
Power Supply
- Power supply: 48 V / 0.4 A.
- Max. Power consumption: 19.2 W.
- Output: 0.4 a at 48 V.
Temperature
- Operation: 0 to 50 °C.
- Storage: -20 to 70 °C.
Humidity
- Operating: 5% to 95% (non-condensing)
- Storage: 5% to 95% (non-condensing)
Certifications
- CE
- FCC
- VCCI
- RCM
- RoHS
- BSMI
- 2.4 GHz: 400MBit/s
- 5 GHz: 867MBit/s
- 1x USB-A 3.0
USB 3.0 interface
Up to 10x faster data transfer speeds
Two detachable antennas
The long range antennas ensure up to 10x greater signal coverage
USB extension cable included
For flexible placement options and optimal reception
Advanced security
64/128-bit WEP, WPA, WPA2 and WPA3 encryption standards.
EZ WPS
Easily set up Wi-Fi configuration in just 2 steps using the WPS button.
Package Contents:
- 1x router
- 1x power supply unit
- 6x antenna
- 1x instruction
