Home > Network Accessories > REICHELT IE > HOBBES INNOVATION HOBBES 256655G - LAN ID Giga network tester

HOBBES INNOVATION HOBBES 256655G - LAN ID Giga network tester

144.31 EUR Consult the complete sheet with in-depth details, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; falls into the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.

LAN ID Giga

The Hobbes LANIDgiga is a highly efficient tester for quickly and reliably determining the network status and displaying it via LED.
Diagnose network problems during the installation or maintenance of LAN devices or ports.

The instrument differentiates the network status as follows:

1000 BASE-T full duplex
10/100 auto negotiation
100 BASE-Tx full duplex
100 BASE-Tx half duplex
10 BASE-T full duplex
10 BASE-T half duplex

The integrated PoE function identifies existing PoE and the type of PSE (power sourcing equipment) on the entire network.
The Hobbes LANIDgiga is equipped with a Portfinder function.
This helps to determine the appropriate port on the workstation: Simply connect the Hobbes LANIDgiga to an unknown or insecure port, it will send a 10/100 signal (auto-negotiation) to find the switch and the port.

Features:

Checks the PoE status
Identifies the type of PSE if the PoE voltage is detected on wire pair 12-36 (final span) or 45-78 (midspan).
Identifies the bandwidth of the port up to Gigabit Ethernet
Two RJ-45 connectors (one to check switch/hub, the other to check NIC)
Port finder function

specifications:

Connections: 2x RJ-45 (1 male, 1 female)
Energy source: 2x AAA batteries.

EAN: 7630049617827
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new

SEE OFFER

SEE OFFER eBay

Comparison of Similar Products

HOBBES INNOVATION HOBBES FC-2009A - Fiber Checker Pro ll Fiber Optic Cable Tester 2.5 / 1.25 mm 392.34 EUR Fiber Checker Pro ll FO cable tester 2.5 & 1.25 mm

Fiber Checker Pro, VFL with 2.5mm & 1.25mm Interface Visual Fault Locator is used for installation, maintenance, troubleshooting and repair in fiber optic lines.
It is used to detect the continuity of signal transmission and cable breaks in fiber optic lines.
The device works in single mode as well as in multi mode and in plastic fibre optic cables.

The visible range of the laser beam is about 7 km.
The Hobbes Fiber Checker Pro II emits a bright red laser beam in a wave range of 650nm through the connected fiber optic cable either as a pulsed beam or as a continuous beam and thus helps to detect defective spots on the fiber optic cable or connectors.
When testing for continuity, it is therefore easy to test fiber optic cables even in a bundle of fiber optic cables.
Alternatively, a fiber optic section can be tested by bending a patch cable.
Defective sections can be identified by the red laser light clearly emerging at the defective point.

Wave range: 650nm.
Range: visible up to 7 km
Easy detection of FO cable faults by visible red laser beam
Universal connector for testing different connections: ST, SC, FC, FDDA
Highly effective circuits ensure stable laser power
works either with a continuous beam or with a pulsed beam
Can withstand dust, moisture and immersion up to 1 m water

SEE OFFER SEE OFFER ebay

HOBBES INNOVATION HOBBES POESMART - PoEsmart PoE Inline Tester 164.98 EUR HOBBES PoEsmart - Power Over Ethernet Inline Tester

The HOBBES PoE detector PoEsmart is a Power over Ethernet detector/PoE tester that can be used for PSE (Power Source Equipment), to detect the power status during the installation of a PoE system or a CCTV system.

Compatible with IEEE 802.3af/at/bt standard.
Identifies the PoE standard of PSE: IEEE802.3af, IEEE802.3at, IEEE802.3bt or a non-standard without having a separate power source
Identifies the polarity of PoE data pair and spare pair
New battery-less operation technology
Monitoring and troubleshooting of IEEE802.3af/802.3at/802.3bt Type 3 (4PPoE) and 802.3bt Type 4 standard PoE systems
Inline real-time IEEE802.3bt health analysis and monitoring
Full display of PoE information without scrolling
Measures current and power of DC power supplies
Compact and lightweight design

PoEsmart 256320 is an inline power-over-Ethernet tester (compliant with IEEE 802.3bt standard).
An indispensable device for PoE technology operation is.
It performs power tests of PSE (Power Sourcing Equipment) and provides informative power status of PoE systems during PoE system installation.
It identifies IEEE802.3af, IEEE802.3at or IEEE802.3bt PoE standard from PSE without requiring a separate PD (Powered Device).
PoEsmart, is equipped with an internal PD to simulate a powered device known as SPD (simulate powered device).
When used in conjunction with a PD, PoEsmart's innovative technology is able to analyze and monitor the voltage, current and power status supplied by PSE without interrupting the data flow.

Package Contents:

1x 15 cm FTP Ethernet cable
1x DC power cable
1x User manual

SEE OFFER SEE OFFER ebay

HOBBES INNOVATION HOBBES 256800 - GIGA-X Network Status Tester 206.29 EUR The GIGA-X is an excellent diagnostic tool for the network technician's work.
By using the GIGA-X, he can quickly find out characteristics of different networks and uncover network connection problems.

The GIGA-X is both an on-line cable tester and a network status tester for 10/100/1000 networks!
At the touch of a button, the GIGA-X measures the performance of a network's transmission speeds, connection status, cable length, etc.

Quickly maps the structure of the existing network
Test is possible in online and offline network mode
Automatic testing of connection speeds
Detect open or short-circuited connections in cables or connectors in network cards, hubs or switches
Detects 10/100/1000BASE-T
Length measurement of the cable wires (in meters)
Identification of crossover cables
Automatic switching of the receive and transmit signals
Battery status display
Self-diagnosis at power-on

SEE OFFER SEE OFFER ebay

HOBBES INNOVATION HOBBES 258012IM2 - INNOTEST Modular cable tester, network 268.3 EUR INNOTEST Modular cable tester, with 6 network modules

The INNOTEST Modular Cable Tester is the latest innovation in test technology on the market.
It is the first tester of its kind in modular design.
It works with exchangeable modules, so that the required connection is always available.
In this version it comes in a case together with 6 modules for testing network cables

Modules are supplied with the following connectors:

RJ-45
RJ-11
F-connector
BNC

The INNOTEST Modular Cable Tester tests the continuity of cables to check open cables, short circuited wires, cross wires and the resulting pin-to-pin configuration of your cables.

Modules can be exchanged
Automatically recognizes PIN numbers and identifies connection
Identifies open cables, short circuited wires, cross wires and connectivity of faulty wires
Displays pin-to-pin configuration
Alphanumeric LCD display

Control switch:

NEXT
ENTER
EXIT

SEE OFFER SEE OFFER ebay

HOBBES INNOVATION HOBBES 258898 - TEST-i All-in-One cable/interface tester 557.71 EUR TEST-i All-in-One Cable/ Interface Tester

The third generation of the PC Cable Testers-Hobbes TEST-i - All-in-One Universal Cable Tester / Interface Tester, is a specially designed multi-function cable tester that tests and analyzes a wide range of PC cables and the most commonly used ribbon cables.

The Hobbes TEST-i not only tests the most common cables for short-circuited, open or incorrectly wired cable pins, but also shows the test results on the display using the pin-to-pin method.
The tester can store up to 100 results.
This data can be collected for evaluation and uploaded to a PC via USB.
With its integrated LCD display (with backlight), the user can easily and efficiently check the wiring of cables.
The Hobbes TEST-i is an excellent and helpful tool for a system integrator or service technician to quickly troubleshoot PC cables.

Identifies open, short-circuited and incorrectly wired wires.
Supports more than 18 types of PC connections
100 results can be stored.
Transfer of the results to the PC via USB.
LCD screen with backlight.
Low battery indicator

Interfaces:

IDC40
IDC34
DVI29
HDB15M/F
DB9M/F
COAX
BNC
RJ-11
RJ-45
1394-6P
1394-4P
SATA
USB(A/B)
HDMI
RCA

SEE OFFER SEE OFFER ebay

HOBBES INNOVATION HOBBES 256652AID - LANtest Pro Kit Cable Tester 144.27 EUR LANtest Pro Kit network cable tester including 4 remote units

The LANtest Pro - Network Cable Tester with Tone Generator is a small, handy tester that allows the user to quickly view the condition of Ethernet twisted pair cables.
It detects faults such as open, shorted, crossed, twisted pair and split pair faults in seconds.
With the tone generator function, the technician can send a signal through the installed cables and then use the Cable Tracer to locate the fault.

LANtest Pro includes a base unit and four remote units that allow a technician to easily test patch cords and installed cables.

4 Remote Units
Detection of the following faults: open, short-circuited, twisted, crossed and split pair cables
Detection of the split pair error from a minimum cable length of 40cm
Testing the cable shielding
Specially designed remote units for testing the installed cables by only one person
Easy to read error display and high speed error measurement
Debug mode for most precise error cause
Automatic sleep mode and power off button for low power consumption
Low battery indicator
Tone generator function (single tone signal/multitone signal).

SEE OFFER SEE OFFER ebay

HOBBES INNOVATION HOBBES 256652A - LANtest Pro Cable Tester 133.93 EUR LANtest Pro Cable Tester

Handy tester for quick testing of TP network cables

Testing of 8pin TP data cables with RJ-45 connector:

Passage
open connections
Short circuits (wire/wire or wire/screen)
crossed, twisted and split pairs
Integrity of the screen
cables laid in the wall (with the attached remote unit)

Debug mode

for fast error identification

Batteries for the test device:

4 x Micro (AAA) 1.5V (LR03 / AM-4)

Scope of delivery:

Tester
Remote Unit (plugged onto the tester)
Operating instructions
vinyl bag

SEE OFFER SEE OFFER ebay

HOBBES INNOVATION HOBBES 256003PRO - LANsmart Pro Network Tester 340.66 EUR The Hobbes LANsmart Pro
It has the same features as the Hobbes LANsmart TDR, plus the ability to check coaxial cables and telephone cables.

All-in-one tester

Wiring diagram
Quick test
Tone generator
Cable length measurement
Portfinder
Error localization

The Hobbes LANsmart Pro also features an analogue and digital audio signal generator to detect hidden cables and four coded remote units that are individually identifiable.
The Hobbes LANsmart Pro also displays a pin-to-pin wiring diagram and tests for all common wiring errors.
The Hobbes LANsmart Pro provides high accuracy length measurement and fault location in phone and data cables.

Tests for errors

open, short-circuited, split, twisted and crossed cables
Pin-to-pin wiring diagram
for easy finding of faulty cabling
Individually identifiable remote units
Facilitates the location of errors
Shows the distance to the cable fault

Ideal for
Cat5, Cat5E and Cat6 cable for measurement without remote unit

Checks
Coax, telephone (2-/4-/6-pole), and data cables

Self-calibration function
for high measurement accuracy when testing non-standard cables

RJ45/ RJ11 connection protection
for protection against overvoltage in telephone cables

SEE OFFER SEE OFFER ebay

HOBBES INNOVATION HOBBES FC-2005 - Laser Fiber Checker Pro 185.61 EUR Portable Laser Fiber Checker Pro

The Hobbes Fiber Checker Pro is used for the simple and quick inspection of defective fiber optic cables.

Sends a visible (650nm) strong laser signal through the cable - breaks become visible by a recognizable light in the area of the defective spot. Fractures or damage in the fibre optic cable reflect/reflect the light and indicate the damaged area by a bright glow.

universal connector
Can be used with common connector types (ST, SC, FC, etc.)

Switchable between continuous and pulsating beam
Visible light beam on up to 3km FO path (minimum)
Both for multimode and single mode lines suitable

Batteries for the test device

2x AAA 1.5V (LR03 / AM-4)

SEE OFFER SEE OFFER ebay

HOBBES INNOVATION HOBBES FC-2005A - Laser Fiber Checker Pro, 1.25 mm 268.3 EUR Portable Laser Fiber Checker Pro with 1.25 mm adapter

For fast testing of FO cables

Sends a visible (650nm) laser signal through the cable - breakage points can be identified by a visible light in the area of the defective spot
Universal connector, can be used with common connector types (ST, SC, FC and others)
The 2.5mm to 1.25mm adapter (included in delivery) allows the user to test 1.25mm cables
Switchable between continuous and pulsating beam
Visible light beam on up to 3km FO path
Both for multimode and single mode lines suitable

Batteries for the test device

2 x Micro (AAA) 1.5V (LR03 / AM-4)

SEE OFFER SEE OFFER ebay

VALUE 13993002 - Network cable multifunctional tester, coax, Cat. 5, Cat. 6 216.57 EUR VALUE network cable multifunctional tester

Handy LCD multifunctional LAN cable tester

Check COAX, CAT5 and CAT6 for wiring faults and malfunction
Checking of assignment sequences
TDR (time domain reflect meter) for lengths and distance measurements
Find open lines, short-circuits, faults, misassignments, split pairs
Determination of continuity and occupancy patterns
Battery fault indicator

Caution: do not connect the cable tester to equipment while it is running

SEE OFFER SEE OFFER ebay

TREND NETWORKS ID SIGNALTEKNT - SignalTEK NT cable tester, for copper and fibre optic networks 2717.45 EUR NETWORK TRANSMISSION TESTER - SignalTEK NT

*** Now with touchscreen ***

Features:

Gigabit performance measured on passive cabling and active networks
PDF test reports generated in accordance with IEEE 802.3ab standard
VoIP/CCTV/Web/IP video traffic simulated
Connection rate, Port ID, Ping, Traceroute, IPv4/IPv6 tested
IDEAL AnyWARE app supported

Installation tested
Cabling:

Testing the performance parameters of the network on copper cables and fibre-optic in accordance with IEEE802.3ab
Wiring test for interruptions, short circuits, faulty wiring and split pairs, in accordance with TIA-568
Testing the Gigabit transmission route on copper cables and fibre-optic

Active networks:

Network load test by means of switches with simulation of the CCTV/IPTV/VoIP/web traffic
PoE/PoE+ check with the display of the voltage available on the device and the assigned pins
Ethernet continuity test on the device up to 10/100/1000 Mbit/s
Network configuration verification (device IP/gateway address/subnet mask)
Identification of the switch port via LLDP/CDP protocols

SEE OFFER SEE OFFER ebay

HOBBES INNOVATION HOBBES 258012IM4 - INNOTEST Modular cable tester, HDMI 247.63 EUR INNOTEST Modular cable tester, with 4 HDMI modules

The INNOTEST Modular Cable Tester is the latest innovation in test technology on the market.
It is the first tester of its kind in modular design.
It works with exchangeable modules, so that the required connection is always available.
In this version it comes in a case together with 4 modules for testing HDMI cables

Modules are supplied with the following connectors:

HDMI
Mini HDMI
Micro HDMI

The INNOTEST Modular Cable Tester tests the continuity of cables to check open cables, short circuited wires, cross wires and the resulting pin-to-pin configuration of your cables.

Modules can be exchanged
Automatically recognizes PIN numbers and identifies connection
Identifies open cables, short circuited wires, cross wires and connectivity of faulty wires
Displays pin-to-pin configuration
Alphanumeric LCD display
Supports 32 connection types

Control switch:

NEXT
ENTER
EXIT

SEE OFFER SEE OFFER ebay

TREND NETWORKS ID TN2 - Tone generator Tone-II for cable tester 102.2 EUR The tone generator is used to apply a tone signal to a pair of wires or a single conductor and track it with the Inductive Receiver (Model R180001).

The tone generator allows technicians to identify a wire in the middle of a bundle at a switching distribution board or at the remote end. It can be used for twisted pair, coax and on live wires (150 V DC) and is equipped with a standard RJ45 connector.

SEE OFFER SEE OFFER ebay

TREND NETWORKS ID NAVITEKNTPRO - NaviTEK NT Pro network tester, for copper and fiber optic networ 1898 EUR NETWORK TESTING DEVICE - NaviTEK NT Series

The NaviTEK NT is a network tester designed to troubleshoot and maintain active and passive copper cable and fiber optic networks. With its streamlined graphical user interface, the NaviTEK NT enables network technicians to identify and troubleshoot network connectivity problems faster than ever before. Tests can then be saved as a PDF report and shared with colleagues and customers via the free IDEAL AnyWARE app.

Network fault diagnostics Quickly locate and fix connection faults in networks.
Network service discovery Port details, IP/MAC address listing and VLAN operation
Monitor network traffic Real-time display of broadcast network traffic
Copper and fiber testing Wiring test, fault removal, PoE and optical power levels

*** Now with touchscreen ***

Features

Network tester (copper/fiber)
Test storage and PDF report generation
Indication of distance to fault location
Supports IDEAL AnyWARE app

All functions of the NaviTEK NT Plus plus the following features:

Connection for fiber optic cable
Login via 802.1x protocol
Display of power level and ok/fault result via SFP module

Meaningful result evaluation when testing fiber optic connections:

When testing fiber optic connections, the NaviTEK NT now immediately displays a meaningful result evaluation. Clear colors indicate passed (green) and failed (red) test sequences. This allows technicians to assess the optical reception level at a glance. For users who are not familiar with optical signal levels, this display also makes it easier to evaluate the measurement results. The good / bad limits only need to be set in the main menu of the test setup

Netscan:
Display a list of IP and MAC addresses for all devices connected to the network.

Test mode selection

A test mode selection has been introduced on the home screen. Now users can instantly select between auto-discovery, cable, switch or network testing. The NaviTEK NT can now also display LLDP/CDP port information on switches that are to reject unauthorized devices. This further user-friendly improvement is made possible by a passive test mode.

SEE OFFER SEE OFFER ebay

HOBBES INNOVATION HOBBES FA-003 - LC Adapter 2.5mm to 1.25mm 82.25 EUR LC Adapter 2.5mm to 1.25mm, for Laser Fiber Checker Pro

HOBBES LC Adapter 2.5mm to 1.25mm.

SEE OFFER SEE OFFER ebay

TREND NETWORKS ID POE PRO BT - Network tester VDV PoE Pro BT 901.7 EUR The PoE Pro with Bluetooth® increases the informative value of the measurements and documents the proper functioning of the PoE supply during installation, maintenance and fault diagnosis of network cables.

Test results are stored in real time on the mobile device through the free AnyWARE Cloud app and can then be seamlessly transferred to the AnyWARE Cloud to create professional PDF reports. Previously, technicians had to know the individual standards, output powers and cable lengths of PoE to ensure that a connected device could operate properly. The PoE Pro detects - regardless of cable length, cable grade and other factors - the power class of the PoE source (utility) and the power provided to the PoE device (consumer). The tester is equipped with a tone generator and identifies and locates cables in conjunction with a compatible inductive receiver (option R180001).

It outputs a clear OK/failure result rating in accordance with IEEE 802.3af/at/bt standards. The PoE Pro detects switch data rates of 10M/100M/1G/2.5G/5G/10G to test switch configurations and ensure the desired network rate at the installed device location. In addition to PoE testing and fault diagnostics with reporting capability via the AnyWARE Cloud App, TDR technology allows you to quickly and accurately locate breaks and shorts on the cable.

The compact tester supports the following functions:

Wiring test
Port flashing
Detects analog (PBX) and digital (ISDN) telephone services
Multimedia support RJ-45, RJ-11/RJ-12
Coaxial ports for testing low voltage copper lines

SEE OFFER SEE OFFER ebay

KURTH ELECTRONIC KURTH KE7000 - KE7000 set LAN cable tester - two devices 256.97 EUR ICT network testers - cost-effective cable testers made in Germany!

KE7000 cable testers are cost-effective test tools for patch, LAN and telecommunications cabling, as well as coaxial cables using an optional adapter.
Unshielded and shielded connecting cables with twisted pairs (UTP and STP cables) in installed networks as well as patch cables can be tested and verified. BNC- and F-socket coaxial cables can be checked for continuity using the RJ45 coaxial adapter. One device is automatically configured as a master and one as a slave. The advantage of using two main devices is that the status of the tests on both devices can be easily read, simplifying and accelerating the measurement process.

Tests:

Telephone (RJ11), data (RJ45) and optional coaxial cables

Checks for:

Continuity, interruption, short circuit, interchange, shielding faults, multiple errors
Device pair displays errors on both sides
Detects active switches at the far end of the line
Clear representation of cable status
Over-voltage protection up to 60 V DC
Cost-effective and robust

SEE OFFER SEE OFFER ebay

TREND NETWORKS ID PR2 - Inductive receiver Probe-II for cable tester 108.35 EUR The inductive receiver allows the localization of even weak signals with acoustic and optical signal output.

It enables accurate identification even in the most crowded bundles. The tester can communicate with the tone generator (Model R180003) or any TREND Networks tester. The Inductive Receiver is equipped with a headphone jack for working in high background noise and an LED flashlight for working in dark environments.

SEE OFFER SEE OFFER ebay

TREND NETWORKS ID LANXP PR - LanXPLORER pro premium package 3898.09 EUR Tester for active and passive networks, offers extensive functionality in the areas of LAN management and network functions over copper and fiber optics.

Features:
• Detection of active devices via Network Discovery function
• Comparison of active devices with archived data via Network Verify function
• Execution of DHCP, ping and traceroute and support of VLAN
• Loopback function for Layer 1, 2 and 3 applications with full bandwidth
• Create statistics for TopTen-Talker, used protocols, error sources, bandwidths, and much more.

Copper functions
• Check wiring diagram, error detection per pin with distance to error location
• Port determination by tone generator with inductive receiver
• Detects PoE and PoE+ voltage, determines current and power in endpoint and inline modes
• Control of the status LEDs for port detection
• 10/100/1000 BASE-T support
• Network monitoring through inline tests and PC diagnostics
• Monitoring of quality parameters in VoIP applications, including RTP jitter

Fibre optic functions
• Singlemode and multimode SFP variants
• Support of 1000BASE-SX/LX/ZX
• Hub flashing function

WLAN functions
• 802.11b,g and n support
• Determines access points, SSID, channels used, signal strength and security settings
• Channel conflict detection

• WLAN - Testing wireless networks
• SFP - Fiber optic connection
• Multifunctional keys
• Auto-test
• Navigation keys
• Housing - Robust and ergonomic housing shells with comfortable handling
• USB interface and internal memory
• QVGA 3.5'' color display with touch function
• RJ45 connector
• Interchangeable RJ45 inserts
• Inline Tests

Scope of delivery:
1 x LanXPLORER PRO measuring device, 1 x remote adapter no. 1, 1 x USB WLAN antenna, 1 x NiMH battery pack, 1 x power supply with EU/UK adapters, 2 x patch cables - 30cm, Cat. 5e STP, 1 x quick reference guide, 1 x carrying case, 1 x Wi-Fi adapter, 1 x IDEAL inductive receiver no. 62-164

SEE OFFER SEE OFFER ebay

KLEIN TOOLS KLT VDV770-851 - Scout Pro 3 Kit Remote Expansion Kit ID #7 to #12 226.96 EUR Test + Map™ Remote Unit Expansion Kit (No. 7 - 12) for Scout™ Pro 3 Test Unit

Increase your test capacities by 6 times with these intelligent remote units
This kit is for use with the Scout™ Pro 3 tester for the following tests:

voice cable (RJ11/12)
data cable (RJ45)
Video coaxial lines (F-connectors)

It can check, assign and identify in a single step, halving the time required for testing.
The remote units are numbered from 7 to 12 for easy identification.
Each remote unit has an RJ45 jack for testing data cables and an F-connector for testing coaxial cables.

Attention
When connecting to the RJ45 socket of the Test + Map™ ID Remote units, make sure to use the Klein Tools RJ11/RJ12 universal cable or an approved equivalent adapter cable.
Using a standard RJ11/RJ12 patch cable may damage the contact pins

Scope of delivery:

6x Test + Map™ Remote units
6x socket to socket coax adapter
6x RJ45 jumper test cable
2x RJ11 jumper cable
2x RJ12 jumper cable
1x zipper pocket

SEE OFFER SEE OFFER ebay

DIGITUS DN-94022 - 4-piece network tool set 28.5 EUR DIGITUS Network Tool Set

Network tool set, LAN tester, crimping pliers, cutting & bisol. LSA, tool, bag

Field of application: for troubleshooting, testing and new installations in the network
General features:
Suitable for 6P4C and 8P8C connectors.
Fast and easy operation
Ergonomic handle
Robust metal design
Network tester:
Toner - Battery: 9V Alkaline
Main unit connection: 2x RJ45 jack
Remote unit connection: 1x RJ45 jack
Ideal for testing RJ11, RJ12 and RJ45 jacks
Individual LED indicators for PIN 1 to 8 and Ground
For continuity measurement of network or communication cables
Automatic test run
Lay-on tool:
Suitable for LSA strips
Cable installation with simultaneous cutting of protruding cable ends
With extraction hook and unlocking blade
Cutting and stripping tool:
Suitable for CAT 5e, CAT 6, CAT 7 (Ø > 2-10 mm).
Adjustable cutting depth

Package contents:

Network tester RJ11, 12 and 45
LSA Punch Down Tool with cable cutting tool
Crimping tool RJ11, 12 and 45
Cutting and stripping tool
carrying bag
exclusive battery for the network tester (block cell 9V)

SEE OFFER SEE OFFER ebay

VALUE 19062034 - 4-piece network tool set 40.91 EUR VALUE network tool set, 4-piece

Basic tool set for networkers, incl. wiring tool for LSA-plus IDC connectors, LAN tester for all types of patch cables with RJ-45, RJ-12 and RJ-11 connectors, cable scraper with 4 different blades and crimping tool for RJ-45, RJ-12 and RJ-11 connectors

Set in dark grey zip-up case
Wiring tool for LSA-plus IDC connectors - cut through the insulation, press in the wire, make contact and cut off the protruding end in one operation
LAN Tester for all types of patch cables with RJ-45, RJ-12 and RJ-11 connectors - connection test with LED display for 8 single wires and shielding/detection of continuity, misalignment, interruption, short circuit - separate receiver suitable for longer cables. The main unit and the separate receiver can be attached to each other via a side guide rail - power supply via 9 VDC block battery (not included)
Cable scraper - with 4 different blades for cutting the PVC cable sheath into different sizes
Crimping tool for RJ-45, RJ-12 and RJ-11 connectors

SEE OFFER SEE OFFER ebay

KLEIN TOOLS KLT VDV770-850 - Scout® Pro 3 Test n Map Remote Set ID #2 to #6 237.33 EUR Test + Map™ Remote upgrade kit for Scout™ Pro 3 tester

This kit can be used for the following tests when used with the Scout™ Pro 3 tester:

voice cable (RJ11/12)
data cable (RJ45)
Video coaxial lines (F-connectors)

With the kit, it is possible to check, assign and identify in a single step, halving the time required for testing.
The remote units are numbered from 2 to 6 for fast, accurate identification
Each remote unit has an RJ45 jack for testing data cables and an F-connector for testing coaxial cables

Soft, non-slip overmoulded handle on each remote unit
with jumper cables for connection to wall sockets
Including RJ11/RJ12 universal cable from Klein for testing telephone sockets without damaging the remote units

Attention:
Using a standard RJ11/RJ12 patch cable can damage the contact pins

Scope of delivery:

5x Test + Map™ Remote units
6x coax adapter (socket to socket)
2x coax adapter (male to female)
7x RJ45 jumper cable 6 inch (15.2 cm)
2x RJ11 jumper cable 6 inch (15.2 cm)
2x RJ12 jumper cable 6 inch (15.2 cm)

SEE OFFER SEE OFFER ebay

TREND NETWORKS ID ST IP AKKU - SecuriTESTIPBattery 219.05 EUR SecuriTESTIP Lithium-Ionen-Akku
erlaubt bis zu 10 Stunden Dauerbetrieb.

Zubehör für: SecuriTESTIP, CCTV/ Kameratester (ID ST IP TESTER)

SEE OFFER SEE OFFER ebay

TREND NETWORKS ID ST IP KABEL - SecuriTESTIPCableSet 65.3 EUR SecuriTESTIP Kabelsatz bestehend aus 1x Koaxialkabel 3 m, 1x Stromversorgungskabel 3m und 2xRS485-Buchse (grün).

Zubehör für: SecuriTESTIP, CCTV/ Kameratester (ID ST IP TESTER)
SEE OFFER SEE OFFER ebay

INTELLINET INT 351898 - Multifunction cable tester, RJ45/RJ11 18.01 EUR
Tests RJ11 and RJ45
Cable type: UTP/STP/FTP
Tests shielded and unshielded LAN cable
LEDs indicate connections and faults

SEE OFFER SEE OFFER ebay

HOBBES INNOVATION HOBBES SURVLTEST - SURVLtest, Multifunction CCTV Tester 1250.23 EUR HST319 SURVLtest - Multi-Function IP/CCTV Tester for IP Digital/HD Coax/Analog System Camera

7 inch IPS touch screen
1920 x 1200 resolution
8MP TVI
8MP CVI
8MP AHD
H. 265/H. 264
4K video display via mainstream

Hobbes SURVLtest Multi-Function IP / CCTV System Camera Tester is an installation and troubleshooting tester for IP Digital/HD Coax/Analog camera systems.
The 1920 x 1200 resolution enables it to display network HD and analog cameras in high resolution for numerous ONVIF PTZ and PTZ cameras.
SURVLtest is capable of supplying power to cameras with the built-in PoE/PoE+ (Power Over Ethernet) or its internal Li-Ion battery (12V DC), eliminating the need for external power adapters or injectors.

SURVLtest provides users the ability to power, configure, document, and troubleshoot network surveillance camera systems.
It allows inexperienced users to simply and quickly connect to system cameras without difficulty and aid professional installers complete system tasks with ease and efficiency increasing productivity from start to finish.

Video Mode
1 channel BNC input & 1 channel BNC looped output, NTSC/PAL (Auto adapt)
IP camera test 4K/H. 265/H. 264: IP Discovery/Quick ONVIF/IPC test/RTSP play/Client APK
IP & CVBS test (IP & CVBS test at the same time), converter test from analog to digital with a dual test window
Coaxial HD test 8MP TVI camera test, 3840 x 2160P 12. 5/15 FPS, UTC control/call OSD menu
HDMI input: 1 Channel HDMI input, support 1080P
Image zoom: 4X zoom capacity to enlarge the image, screen snapshot, record, save, view and playback
Analog Video Out: Color bar generator: Output one channel PAL/NTSC color bar video signal for testing monitor or video cable

Package Includes:
HST319 (SURVLtest)
DC12V 2A power adaptor
Cable Tracer Probe
Polymer lithium ion battery (7.4V DC 5000mAh)
BNC cable
RS485 cable
Output power cable
Audio cable
Safety cord
Tester pouch
User manual
8GB SD card

SEE OFFER SEE OFFER ebay

TREND NETWORKS ID VDV II CLD - Cable tester VDV II BT, for copper networks 243.75 EUR VDV II the universal wiring tester - cloud-connected with Bluetooth and report function
for important basic testing to avoid connection problems.

The VDI II cable tester is easy to operate and allows the rapid verification of the copper cable of voice, data and video installations, such as telephone lines, data lines and video/security installations, in apartments, offices and industrial environments.
It indicates wiring faults such as interruptions, short circuits, malfunctions and split pairs.
Tests shielded cables and is equipped with a tone generator.
The test results are saved in real time by the free AnyWARE Cloud app (prerequisite: IOS/Android, BT5.0) on the mobile device and can then be transferred seamlessly to the AnyWARE Cloud to create professional PDF reports.
Connection options for RJ11, RJ45 and coax F are available.
The tester is equipped with a large LCD and a remote adapter built into the bottom of the housing.
SEE OFFER SEE OFFER ebay

HOBBES INNOVATION HOBBES 256711D - SMARTone tone generator 163.96 EUR SMARTone Digital Cable Locator Tone Generator

The SMARTone Network Cable Tester & Tracker is an excellent network installation and troubleshooting tool.
It uses advanced digital signal technology to find and identify routed cables with high precision and speed.
The digital technology eliminates noise and false signals.

Uses digital signal technology, avoiding noise and false signals
Finds and identifies cables laid together with the cable locator quickly and with high precision
Transmits digital/analogue sound in two modes: single tone and alternating tone
Provides pin-to-pin testing to detect open, shorted, twisted, crossed and otherwise mis-wired cables
Auto power-off and battery status display
Compatible with the IEEE802.3af standard.

SEE OFFER SEE OFFER ebay

HOBBES INNOVATION HOBBES 256711A - Tone generator 79.72 EUR Cable locator tone generator

Practical tool for the installation of networks

Due to the possibility of generating different tones, several tone generators can be used simultaneously.

The Hobbes tone generator has also proven itself in practice through the various connecting cables.

The Hobbes tone generator can be used together with the Hobbes Probe to detect cable problems during installation.

In this way, broken cables can be found and the point of breakage can be located using the Hobbes Probe.

The Hobbes Tone Generator can also be used to test the cables for current.

Specifications:

Output power: 5V
Power supply and life: DC 9V battery x 1 piece, 4mA.

SEE OFFER SEE OFFER ebay

EXSYS EX-6002POE - Ethernet PoE 1Giga LAN 4 x USB 2.0 ports 164.94 EUR The EX-6002PoE allows you to easily connect external USB 2.0 hard drive housings, memory sticks, USB scanners or USB printers over the network
(10/100/1000 Mbps Ethernet) or as a USB 2.0 hub.
You are therefore no longer dependent on a specified distance but can integrate every USB 2.0 peripheral over the network with a
freely selectable IP address. The devices are controlled via the supplied software.
The EX-6002PoE is supplied in a metal housing and the four USB 2.0 ports as well as the power supply connection are screw-mountable. It can be used in a 19'' rack with DIN rail kit.
The EX-6002PoE supports power over Ethernet and requires no additional power supply unit.

• Makes 4 USB peripherals available over your existing network
• High-performance USB enhancement, server over IP or 4-port USB 2.0 hub
• Four high-speed, high-performance USB 2.0 outputs
• Supports file server, scan server or print server
• Supports fixed IP and DHCP client
• No distance limitation for USB peripherals within the network
• Can be used for MFPs (multi-function printers), USB printers, scanners, memory sticks, USB hard drives, storage devices, etc.
• Intuitive user interface for easy configuration and firmware upgrade
• The EX-6002PoE can either be controlled via TCP/IP or USB 2.0.
SEE OFFER SEE OFFER ebay

SOFTING LINKXPERT M3 - LinkXpert M3 cable tester, for LAN 1560.36 EUR The 3-media multitool for easy testing of LAN networks

Comprehensive Ethernet network diagnostics up to 1 Gbit/s Ethernet on copper and fiber optic links and WLAN
Individual test scenarios thanks to freely configurable test profiles
High-speed detection up to 10 Gbit/s and load tests up to high-power PoE (90 W / class 8)
Testing of fiber optic polarity and visual troubleshooting via VFL
Comprehensive documentation options

With connectivity to all 3 media - copper, fiber optic and WLAN - LinkXpert M3 is perfect for installation and documentation through to troubleshooting Ethernet networks.
Areas of application include SoHo and office environments as well as industrial applications.

LinkXpert M3 is a versatile cabling and networking tool that helps to complete day-to-day cabling tasks through to solving complex Ethernet problems.

The device offers a unique combination of cabling testing and comprehensive Ethernet network diagnostics on copper, fiber and WLAN to keep the network up and running around the clock.

For network commissioning, the LinkXpert M3 can perform automatic tests that can be individually configured.
All tests can also be carried out individually for troubleshooting purposes.

Another unique feature in this price class is the support of the video microscope for connector end face evaluation and the detection of 10 Gbit/s networks.

Areas of application
Always ideally equipped for commissioning and troubleshooting, even in larger Ethernet networks - from copper to fiber optics to WLAN
Optional accessory packages extend the range of applications to industrial networks, e.g. machine and plant construction
Reliable multi-tool for data and network technology installers, maintenance technicians and network administrators

Special features
Simple operation and clear display via 5 1/4-inch color touchscreen
Autotests according to test profiles and individual tests
Comprehensive network diagnostics for acceptance tests and troubleshooting on Ethernet networks based on copper, fiber optics and WLAN
Automated PASS/FAIL certification of fiber optic connector end faces (optional)
Rechargeable Li-Ion battery for long operating times

Your benefits
Test passive cabling and active networks with just one combination device for all media
Complete documentation of your test results
High-end device with outstanding price-performance ratio

Scope of delivery:
1x LinkXpert M3 main device with integrated LiIon battery
1x Smartremote #1 Art. No. 226292-1
1x power supply unit
1x Carrying case
2x RJ45 connection cable
1x Quick...
SEE OFFER SEE OFFER ebay

PANCONTROL PAN LAN-FINDER - Cable locator and LAN tester 78.16 EUR PAN cable finder - cable locator and LAN tester for individual conductors, telephone and network cables
LAN - test for continuity, interruptions, short circuits and reversed conductors (RJ45, RJ11, BNC)
To detect conductors in walls, line breaks and short circuits
Acoustic display of live conductors
Adjustable volume and sensitivity
Headphone socket
Tests on telephone lines
Optical continuity test

Included in delivery: bag, operating instructions, transmitter and receiver, adapter with crocodile clips, headphones

Technical data
Weight (gross/net) 565/180 g
Dimensions of device: 124 x 66 x 31 mm
Required battery/ies: 1x 9 V 6F22, 3 x 1.5V AAA

SEE OFFER SEE OFFER ebay

TREND NETWORKS ID POE PRO BDL - Bundle PoE Pro BT with measuring accessories 965.63 EUR +++ VDV II Pro BT exclusive promotion bundle +++

This Reichelt exclusive promotion bundle consists of:
The PoE Pro BT cable tester
The inductive Probe-II receiver
The VDV II RJ45 remote adapter kit

The PoE Pro with Bluetooth eliminates guesswork during measurements and documents proper functioning of the PoE supply during installation, maintenance and troubleshooting of network cables.
Precise fault localisation saves time and money
Immediate result output
One tester for all requirements
Faster testing of voice and data services
Quick determination of the network rate
Voltage warning provides protection against damage
Cable localisation saves you time
Port identification

The Probe-II inductive receiver enables even weak signals to be localised with acoustic and optical signal output.
It enables accurate identification even in the most crowded bundles.

The 12 numbered remote adapters enable efficient use in one-man testing.
The active remote adapters for wiring testing show the number of the connected remote adapter on the VDV II device display.
SEE OFFER SEE OFFER ebay

INTELLINET INT 780094 - 5-in-1 Kabeltester 56.62 EUR The Intellinet Network Solutions 5-in-1 Cable Tester is an affordable and versatile MIS tool that tests five common LAN and computer cables up to 600 ft. long: Ethernet (RJ45), 10Base, RJ11, FireWire (1394) and USB. It checks for continuity, crossover and shorting. Testing is completed with the press of a button, and LEDs indicate connections and faults of wires and pins. Designed for use with both shielded (STP) and unshielded (UTP) cables up to 180 m (600 ft.) long.

Versatile cable tester
For Cat5/6 network and ISDN connection tests
USB AB- and IEEE1394 6-pin FireWire cable tester
Connection test with LED indicators for 8 single lines and screening
Tests for: Short, Non-Parallel, No Connection
Quality protective pouch

SEE OFFER SEE OFFER ebay

SHIVERPEAKS SHVP BS18-25001 - Network tool set, 4 pieces 37.81 EUR shiverpeaks®-BASIC-S--tool set, network, 4 pieces, with bag

This set contains all the necessary tools to assemble cables, sockets or patch panels and then test them.
Suitable for your home network or SOHO (small office, home office).

Includes a LAN tester with two test modes
Sweep Mode (sampling test):
Each data line is tested individually, a signal is sent to the first pin on the master unit, the LED for pin 1 lights green on master unit and remote unit, etc.
Slow Sweep Mode (Scan Test):
This variant tests slower than the first.

So you make sure that the cable with the connectors is continuous and the assignment is correct.
All 8 or 6 data lines are tested, as well as the ground (ground).

Included in the set:
Crimp tool for RJ-12 (6P6C) and RJ-45 (8P8C) modular plugs
LSA laying tool with 2 fold-out pulling hooks
LAN tester for RJ-12 (6P6C) and RJ-45 (8P8C), 9V battery not included
Abisoling and cutting tool
Storage bag with zipper
Material: textile fabric
Color: black

SEE OFFER SEE OFFER ebay

FREI PC-NETZWERK KIT - Network tool case for installation/testing 30.57 EUR Network tool case
Extensive tool set for installing and testing data networks.

1x LSA punch-down tool
1x LAN tester (without battery) for RJ11, RJ12, RJ45
1x cable stripper
1x RJ11/RJ12/RJ45 crimping pliers
Robust case with zipper
Dimensions (W x H x D): approx. 215 x 120 x 50 mm

See accessories for a suitable battery for the LAN tester.
SEE OFFER SEE OFFER ebay

PCE INSTRUMENTS PCE LT 12 - PCE-LT 12 Digital Multimeter 172.14 EUR PCE Instruments PCE-LT 12 digital multimeter with LAN tester function
Ammeter with lots of measuring functions
For electricians and IT personnel
Analysis of network connection cables
Telephone connection check
NCV
Backlight
Extensive network connection testing
Telephone connection check
Acoustic cable finder function
Robust enclosure for mobile use
Voltage, current and resistance measurement
Contactless voltage detection

SEE OFFER SEE OFFER ebay