FREI KRAD SV200 - Motorcycle - SAE extension cable, 2 m

19.24 EUR
Detailed sheet with complete information, compare prices and find the features for PRODUCTNAME, at the price of PRICE CURRENCY; classified in the category CATEGORY NAME; this product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
Extension cable from the charger to the vehicle - for devices with system connector.
EAN: 4260258510324
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Extension cable from the charger to the vehicle - for devices with system connector.
EAN: 4260258510324
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products

The socket in insulating plastic is equipped with high-quality cables and removable cable contacts.
The scope of delivery includes a fuse holder with fuse (7.5 A) that can be flexibly installed and a mounting bracket for attachment to the pipe linkage.
• with spring hinged lid
• compact design
• with mounting bracket
• hole diameter: 18 mm
• original equipment quality

If the vehicle is equipped with a corresponding counterpart (EC5 connector), a tool-free and short-circuit-free battery installation/removal is possible by simply plugging it together.
• interesting for high quality batteries, which are to be used in different vehicles by plugging them together.
• easy battery removal for battery charging at home, at pitches without 220 V connection
• battery installation/removal without risk of short circuit
• some start boosters on the market can be coupled directly

• for max. 5 cable lugs each
• 7.5 A fuse

• mini housing (instead of the big Far East horn design)
• only 3 cables to connect
• loud piezo technology
• Made in Germany
Note for mounting
For mounting simply screw to the 2 cover holes (piezo opening tilted down) of the vehicle or connect with cable ties.
Connect the black wire with cable lug to the vehicle ground and clamp the gray turn signal wires with enclosed clamp connectors to the live turn signal wires left and right.

• quick connector, ideal for various vehicles.
• with connector locking cap
• dimensions (L x W x H): 58 x 17 x 6 mm
• cable length: 250 mm
• cable lug: 6 mm

After that, a battery with EC5 coupling can be contacted without tools.
• quick connector for batteries with battery cable EC5-coupling
• Battery installation/removal without risk of short circuit

It is ideal to plug into standard on-board sockets of BMW, Triumph and Ducati, or into a small retrofitted DIN on-board socket (SD14/22) and allows simply by inserting it into the tank bag to charge USB consumers such as cell phone, camera or other power consumers.
• compact DIN angle plug
• USB-A and USB-C socket, each 3.6 A
• no vehicle installation
• power consumption only when plugged in
• 1,5 m cable
Technical specifications
• housing dimensions (L x W): 70 x 35 mm
• total length: 1500 mm
• weight: 95 g

Motorcycles up to max. 1400 cc are allowed to be jump-started.
• fully insulated pliers
• total length 1,6 m
• copper cable, cross section 6 mm
• with startsafe ® protection circuit
• starting aid up to max. 1400 ccm
dimensions (L x W x H): 80 x 25 x 15 mm
Cable length: 1500 mm

Suitable for vehicles equipped with an on-board socket. The starter cable offers two-wheelers and quads the easy and quick way to give / take jump start.
• total length with pliers: 160 mm
• flexible copper cable with a large cross-section of 6 mm².
• fully insulated, small battery pole pliers
• up to max. 1400 ccm

- Gold Terminals ensure long lasting, corrosion free connections
- fully molded-strain relief for maximum flexibility
- high quality 26AWG
Split a single headphone jack into two
The MUY1MFF 3.5mm Stereo Splitter Cable/Y-cable features one 3.5mm male and two 3.5mm Female audio connectors, splitting a single headphone jack into two.
A practical, cost-effective audio solution, the 3.5mm stereo splitter cable features fully molded connectors with strain relief for long-lasting durability and high quality gold terminals to ensure corrosion-free connections.

Black plastic
The SimpLED Outdoor extension cable is compact, powerful and versatile.
With a length of 2.50 metres, it can be connected to a SimpLED Outdoor transformer and a SimpLED Outdoor strip.
It also possible to connect two 2.50-metre cables together in order to extend the system as required.
The SimpLED Outdoor extension cable is the perfect complement to the SimpLED Outdoor System.
- IP44 splash-proof

- slimline connector molding designed for use with portable devices
- molded connectors with strain relief
Split one headphone jack into two separate jacks
The MUY1MFFS Slim 3.5mm Stereo Splitter Cable/Y-cable features one 3.5mm male and two 3.5mm female audio connectors, splitting a single headphone jack into two.
A practical, cost-effective audio solution, the 3.5mm stereo splitter cable features slim connector molding that fits easily into a 3.5mm headphone jack, even if the iPod®/iPhone®/iPad®/MP3 player is in a protective case.

- 1x 3.5mm TRS mini jack female connector
- 1x 3.5mm TRS mini jack male connector
- molded connectors with strain relief
- 90% spiral wrapped connectors
Extend the reach of your mobile audio device from your headphones/earphones or your stereo system
The MU2MMFS 2m audio extension cable features one male and one female 3.5mm (1/8” TRS) audio connector, making it easy to extend the reach of your headphones / earphones between your iPhone®, MP3 player or other mobile audio devices and your stereo system.
To ensure long-lasting performance, this high quality extension cord features molded PVC strain relief at each of the mini jack connectors, which prevents the cable termination points from bending at sharp angles, in turn reducing the risk of cable damage. Plus, the slim connector design fits into most audio devices even while inside its protective case.

The housing is weatherproof with IP54, the 1.2 m long cable with battery cable lugs allows flexible installation on the handlebar or pipe linkage.
The housing has a groove on both sides for optimal attachment with cable ties.
• waterproof IP54 housing
• flexible installation due to 1.2 m cable length
• fuse and holder included in delivery
• universal fastening
Technical specifications
• dimensions (L x W x H): 47 x 37 x 19 mm
• weight: 87 g
• cable: 1200 mm
• cable lug: 6 mm
• Voltage: IN 12 V / OUT 5 V
• Charging power: max. 2.1 A

The output sockets can be switched off completely via the central switch so as not to drain the vehicle battery unnecessarily. Operational readiness is signaled by a green LED.
The 1.5 m connection cable allows flexible vehicle installation on the handlebar or tube linkage using the cable ties supplied.
Installation in an 18 mm hole diameter is also possible.
Specifications
• outputs: 2x USB-C with max. 3.6 A Quickcharge
• can be switched off
• with LED power indicator
• flexible installation due to 1.5 m cable length
• built-in fuse with holder
• protected design

Of course, it then also becomes interesting to use this battery interface immediately for battery conservation.
The ''inside'' consists of high-quality components, which are also used by the European automotive industry. A connector sits here best possible and tight in the housing!
• most compact design in aluminum housing
• high quality plug contacts
• long connection cable: 1.3 m / 1 mm²
• integrated mounting bracket for handlebar or linkage
• possibility for hole mounting
Note for mounting
The cigarette lighter on-board socket can be easily mounted on the linkage or handlebar with the integrated mounting bracket using cable ties. Panel mounting with trim hole (27 mm) is also possible. The long 1.3 m connection cable extends to the handlebar. The accessory fuse can be mounted freely in an ideal position in the vehicle.

- orderly cable routing without shortening cables
- surface mounting with adhesive pads or screws
- paintable with any wall color
- easy to cut with miter box and drilling template
- 4 possible cable outlets in the end cap
Innovative arrangement of cables by laying loops instead of shortening them
With the extension of the innovative System M cable duct, you can ensure orderly cable routing of excessively long power cables.
Compared to conventional cable ducts, this version has clips and fixing bars on the base plates.
This makes it possible to place a power cable in loops instead of shortening it.
Thus, the power cable remains in the original, and therefore the warranty of the device.
How many cables can fit in the cable channel depends on the application.
For example, you can arrange up to 3 power cables with a diameter of 9 mm each next to each other or put one power cable in loop.
To fix the surface-mounted cable channel, you can use screws or the adhesive pads included in the package contents.
If you want to cut the cable channel to shorten its length, we recommend using a fine metal saw for this purpose.
Then you can smooth the edges with the help of a file.
If you would like to adapt the white cable duct to your living environment even better, you can easily paint over it with any wall color.
This set is an extension to the System M starter set.
The package contents include two covers, two base plates and ten adhesive pads.
Technical data
- Color: white
- Fastening: Adhesive or screw fastening
- Application area: Indoor
- Width cover: 35 mm
- Length cover: 1050 mm
- Length base plate: 363 mm
- Width base plate: 30 mm
- Height: 15 mm
- Diameter cable: max. 9 mm
- Paintable: Yes
Package contents:
- 2 x cover
- 2 x base plate
- 10 x adhesive pads
- 1 x mounting instructions

• compact angle design
• high quality screw solder contacts
• adjustable cable grommet
• splash water protected

- Enables you to connect four USB 2.0 devices up to 140 m away
- The transmitter and receiver are connected by a Cat.6 UTP or higher network cable (not included)
- Supports USB 2.0 high speed data transfer rates of up to 480 Mbit/s
- Rugged aluminium housing with mounting bracket
The Lindy USB 2.0 Cat.6 extender uses a Cat.6 UTP (or higher) network cable to bridge distances of up to 140 m between computers and four peripherals. Distances of up to 120 m can be achieved using Cat.5e UTP/STP cables. We recommend the use of patch cables with rigid cores to achieve the best possible performance and compatibility.
It is a hardware solution that consists of two components: a transmitter that connects to the computer and a receiver that to connect peripherals. The rugged aluminium housing with mounting brackets makes this extender ideal for remote access to printers, scanners, webcams and external storage media.

- The transmitter and receiver are connected by a Cat.5e/6 network cable (or higher) (not included)
- Supports USB 2.0 high speed data transfer rates of up to 480 Mbit/s
- Plug and play, independent of operating system
The Lindy USB 2.0 Cat.6 extender uses a Cat.5e/6 (or higher) STP network cable to bridge distances of up to 60 m between computers and four peripherals. We recommend the use of patch cables with rigid cores to achieve the best possible performance and compatibility.
It is a hardware solution that consists of two components: a transmitter that connects to the computer and a receiver that to connect peripherals.
The extender is suitable for USB 2.0 devices such as printers, storage media, scanners, mice or keyboards. A power supply is included if you want to connect a high-power devices.

- Connection A: FME socket
- Connection B: FME plug
- Length (depth): 2x 5m
- Suitable for: FME male / FME female
- Cable: lowloss
- Impedance: 50 Ohm

For jump starting/giving, battery charging, as well as for powering accessories with the appropriate plug.
• splash-proof with hinged cover
• short time current 90 A
• strong copper cable: 0,65 m /6 mm²
• hole diameter: 26 mm

- Bridges distances of up to 50 m with a good value Cat. 5e/6 network cable (not included) for 4 devices
- ''Power over Cable'' ensures power supply with just one power supply unit on the transmitter
- Supports USB 2.0 high speed and USB 1.1 full speed/low speed
- Plug and play
This Lindy USB 2.0 Cat.6 extender bridges distances of up to 50 m between four USB devices and a computer. The extender's transmitter and receiver unit are connected using a Cat.5e/6 network cable (not included). We recommend the use of patch cables with rigid cores to achieve the best possible performance and compatibility.
Power is supplied by the RJ45 cable: in other words if you connect the supplied power supply to the transmitter, you no longer need power to the receiver and have more flexibility in its installation.
The rugged aluminium housing with mounting brackets makes this extender ideal for use in industrial applications.

Type FLRY
Insulation reduced
2.5 mm²
100 m coil
Black



- Professional DVI-D Dual Link extension cables for commercial and high-performance AV and IT installations
- Resolutions up to 2560x1600 at 60 Hz and HDTV resolutions up to 1080p are supported
- Robust PVC housing with 24C-gold-plated contacts and connector sleeves
- Tripe-shielded cable with corrosion-resistant, 28AWG tin-plated copper conductor
Cable Lines represents the range of Lindy's contemporary wired connectivity solutions. The Anthra Line DVI-D Dual Link cables from the Cable Line range are the professional choice when it comes to implementing connections for maximum resolutions in commercial AV and IT applications.
The Anthra Line DVI-D Dual Link premium cables feature triple shielding and tin-plated copper conductors with 28AWG cross section for maximum and loss-free transmission performance. Durable corrosion resistance and maximum reliability are ensured by the high-quality connectors, with gold-plated contacts and connector sleeves.
The robust PVC housing features an integrated finger grip. The reinforced and flexible cable strain relief ensures that the cable will last for longer.

- Connection A: FME socket
- Connection B: FME plug
- Length (depth): 2x 10 m
- Suitable for: FME male / FME female
- Cable: lowloss
- Impedance: 50 Ohm

Type FLRY
Insulation reduced
2.5 mm²
5 m coil
Black

Connector 1: 2x RCA/Plug
Connector 2: 2x RCA/Jack
Wire material: CCS (Copper Cladded Steel)
Shielded
Plastic housing
With Red/White RCA connectors (Left/Right audio signal)
Color: Black
Nickel Plated
Length: 5 m
Package: Bulk

Extension Mini PCI Express
Easily extend your existing half size Mini PCI Express card to full size by attaching it to the included extension.
Technical details
- Connectors:
1 x Mini PCIe male
1 x M.2 key M slot - Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key M or key B+M based
on PCIe - Supports PCI Express 3.0 protocol
- Bootable
- Colour: black
- Dimensions (LxWxH):
M.2 board: ca. 120 x 22 x 5 mm
Mini PCIe board: ca. 30 x 23 x 1 mm - Cable length: ca. 20 cm
System requirements
- Motherboard with a free Mini PCIe slot with a PCIe interface
Package content
- Adapter cable
- Extension
- Spacer
- 5 x screws 1.8 x 2.8 mm
- Screwdriver
Package
- Box

2 x 0.75 mm²
Length 5 m

Goobay always has the right electronics accessories for your audio applications, e.g. for hobby sound studios, home cinema evenings with the family or music sessions among friends. Our products transmit audio signals in maximum quality for a crystal clear sound experience. The robust construction and high-quality materials of our connecting cables, adapters, converters and audio plugs ensure a rich entertainment experience. Simple. Anything. Matching!
- The Goobay audio cable connects devices with an RCA connection for superior sound quality and clear sound.
- Dual audio connectors are universally applicable, e.g., for home cinema systems, loudspeakers, amplifiers, hi-fi systems and DJ mixing consoles.
- Optimal transmission of audio signals in stereo format
- Colour-coded plugs allow easy connection to the left and right channels.
- Standardised, precision-fit RCA plugs made of durable metal
- Robust, flexible PVC connecting cable


- Bridges distances of up to 50 m with a low-cost Cat.6 network cable (not included) for two devices
- Bi-directional PoC (Power over Cable) ensures power supply with only one power supply unit at either the transmitter or the receiver
- Supports USB 2.0 high speed and USB 1.1 full speed/low speed
- Plug and play
This Lindy USB 2.0 Cat.6 extender bridges distances of up to 50 m between two USB devices and the computer. The extender's transmitter and receiver are connected with an inexpensive Cat.6 network cable (not included). We recommend the use of patch cables with rigid cores to achieve the best possible performance and compatibility.
The bi-directional POC (Power over Cable) functionality offers additional flexibility. This enables power to be supplied alongside data via a Cat.6 network cable in a point-to-point connection between the transmitter and receiver, meaning that only a single power supply is required at the transmitter or receiver.

CEE plug and coupling, splash-proof.
rubber cable H07RN-F5G2,5.
Colour: black

- USB: 2.4 A total current,
- 1.4 m cable, white
- Ideal when you're on the go
- H03VVH2-F 2x 0.75 mm²
- European socket with increased contact protection
- With an integrated rubber band for securing the cable
With the two USB charging ports and the European socket you can charge three devices at the same time. This saves time and you can keep all your important devices in one place.

Colour: black
Length: 2 m
Impedance: 75 ohms

• 3.5-mm stereo jack plug to 3.5-mm stereo jack connector
• Length: 2.0m