FREI KRAD BA09B - Motorcycle - battery connection cable, EC5 connector
22.56 EUR
Browse the detailed sheet with complete information, compare prices and identify the features of PRODUCTNAME, proposed at the cost of PRICE CURRENCY; belongs to the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
The vehicle connection cable (with EC5 plug) is firmly connected to the ring terminals of the vehicle electrical system. Attention, the screwed ring cable lugs must be completely covered with insulating tape and insulated.
After that, a battery with EC5 coupling can be contacted without tools.
• quick connector for batteries with battery cable EC5-coupling
• Battery installation/removal without risk of short circuit
EAN: 4260258511444
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
The vehicle connection cable (with EC5 plug) is firmly connected to the ring terminals of the vehicle electrical system. Attention, the screwed ring cable lugs must be completely covered with insulating tape and insulated.
After that, a battery with EC5 coupling can be contacted without tools.
• quick connector for batteries with battery cable EC5-coupling
• Battery installation/removal without risk of short circuit
EAN: 4260258511444
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
FREI KRAD BA08 - Motorcycle - battery connection cable, EC5 clutch
20.18 EUR
The battery connection cable (with the EC5 coupling) is firmly mounted on the battery with the 6 mm ring cable lugs. If the vehicle is equipped with a corresponding counterpart (EC5 connector), a tool-free and short-circuit-free battery installation/removal is possible by simply plugging it together.
• interesting for high quality batteries, which are to be used in different vehicles by plugging them together.
• easy battery removal for battery charging at home, at pitches without 220 V connection
• battery installation/removal without risk of short circuit
• some start boosters on the market can be coupled directly
FREI KRAD BA1 - Motorcycle - Multiconnector f. Battery connector
14.55 EUR
The multiconnector cable is used for direct battery connection in the vehicle. The open system connector can then be quickly connected to chargers that have the corresponding system connector.• quick connector, ideal for various vehicles.
• with connector locking cap
• dimensions (L x W x H): 58 x 17 x 6 mm
• cable length: 250 mm
• cable lug: 6 mm
FREI KRAD SD14 - Motorcycle - DIN socket, 4165, 12 V, 0.8 m
22.3 EUR
Instead of the standard stuffing cover, this compact socket has a high-quality spring-loaded hinged cover, known from the series on-board sockets of vehicle manufacturers. The socket in insulating plastic is equipped with high-quality cables and removable cable contacts.
The scope of delivery includes a fuse holder with fuse (7.5 A) that can be flexibly installed and a mounting bracket for attachment to the pipe linkage.
• with spring hinged lid
• compact design
• with mounting bracket
• hole diameter: 18 mm
• original equipment quality
FREI KRAD ES03 - Motorcycle - cable distributor set
19.24 EUR
Allows the connection of max. 5 cable lugs to one battery terminal. With the collecting screw, the cable lugs of various consumers such as on-board socket, grip heater, electronic protector, retrofit warning flasher, turn signal reminder, chain oiler, etc. are combined and each led to the battery with a cable (red/black). The connecting cable is equipped with an 8 mm cable lug on one side to connect to car or motorcycle batteries. Insulated with 2 plastic housings, which can be additionally secured with a cable tie for safety. For the red cable to the positive pole is a flexible fuse with holder included.• for max. 5 cable lugs each
• 7.5 A fuse
FREI KRAD SV200 - Motorcycle - SAE extension cable, 2 m
19.24 EUR
Extension cable from the charger to the vehicle - for devices with system connector.
FREI KRAD BLE2 - Motorcycle - Mini Flashing Buzzer
22.3 EUR
Modern piezo technology in an attractive housing for permanent reminder of switched on turn signals• mini housing (instead of the big Far East horn design)
• only 3 cables to connect
• loud piezo technology
• Made in Germany
Note for mounting
For mounting simply screw to the 2 cover holes (piezo opening tilted down) of the vehicle or connect with cable ties.
Connect the black wire with cable lug to the vehicle ground and clamp the gray turn signal wires with enclosed clamp connectors to the live turn signal wires left and right.
FREI KRAD USB17 - Motorcycle - tank bag cable, USB-A / USB-C
40.86 EUR
The tank bag cable is equipped with a compact DIN angle plug on the vehicle side and a USB twin charger (USB-A and USB-C) on the tank bag side.It is ideal to plug into standard on-board sockets of BMW, Triumph and Ducati, or into a small retrofitted DIN on-board socket (SD14/22) and allows simply by inserting it into the tank bag to charge USB consumers such as cell phone, camera or other power consumers.
• compact DIN angle plug
• USB-A and USB-C socket, each 3.6 A
• no vehicle installation
• power consumption only when plugged in
• 1,5 m cable
Technical specifications
• housing dimensions (L x W): 70 x 35 mm
• total length: 1500 mm
• weight: 95 g
FREI KRAD BA70 - Motorcycle - starter cable, 1.6 m
33.52 EUR
Handy motorcycle starter cable with protection circuit. With a normal car starter cable it is often very difficult to contact the small motorcycle battery terminals. This works better with this special starter cable. The pliers are of course fully insulated and can be opened wide enough to clamp on car and motorcycle batteries. This starter cable has the startsafe ® protection circuit in the middle, which reduces dangerous voltage peaks. This is especially important for vehicles with a lot of electronics such as ABS, injection, navigation, etc.. Motorcycles up to max. 1400 cc are allowed to be jump-started.
• fully insulated pliers
• total length 1,6 m
• copper cable, cross section 6 mm
• with startsafe ® protection circuit
• starting aid up to max. 1400 ccm
dimensions (L x W x H): 80 x 25 x 15 mm
Cable length: 1500 mm
FREI KRAD BS12 - Motorcycle - starter cable, 1.6 m, 6 mm²
28.45 EUR
Starter cable with plug and pliersSuitable for vehicles equipped with an on-board socket. The starter cable offers two-wheelers and quads the easy and quick way to give / take jump start.
• total length with pliers: 160 mm
• flexible copper cable with a large cross-section of 6 mm².
• fully insulated, small battery pole pliers
• up to max. 1400 ccm
FREI KRAD BA18 - Motorcycle - battery disconnector, mini, 160 A
27.83 EUR
Fully insulated battery disconnect switch in mini design for motorcycles, scooters and quads to disconnect the battery from the on-board power supply. This can prevent constant consumers such as clock, memories, immobilizer, USB sockets discharge the battery in longer standstills. However, the battery disconnection can also provide additional theft protection, as the vehicle can no longer be started.• flexible mounting between battery (-) pole and vehicle
• fully insulated
• max. 160 A - 12 V / 10 sec.
FREI KRAD BA12W - Motorcycle - DIN angle plug, 4165, 8 A, splash-proof
19.56 EUR
A compact DIN angled plug suitable for BMW, Ducati, or Triumph series on-board sockets. Due to the angled cable outlet, the cable does not stand out as far as straight plugs when driving. The splash-proof housing with seal can be opened with a central screw. Inside, there is a screw contact for both poles, which can also be used for soldering. The hole of the cable grommet is conical and can be adapted to the respective cable diameter by cutting it off at different points.• compact angle design
• high quality screw solder contacts
• adjustable cable grommet
• splash water protected
FREI KRAD USB12 - Motorcycle -Mini USB on-board socket, 12 V/5 V, 2 A
30.11 EUR
The mini-USB on-board socket with 2 A converts the input voltage from 12 V to USB standard 5 V.The housing is weatherproof with IP54, the 1.2 m long cable with battery cable lugs allows flexible installation on the handlebar or pipe linkage.
The housing has a groove on both sides for optimal attachment with cable ties.
• waterproof IP54 housing
• flexible installation due to 1.2 m cable length
• fuse and holder included in delivery
• universal fastening
Technical specifications
• dimensions (L x W x H): 47 x 37 x 19 mm
• weight: 87 g
• cable: 1200 mm
• cable lug: 6 mm
• Voltage: IN 12 V / OUT 5 V
• Charging power: max. 2.1 A
FREI KRAD ZA01 - Motorcycle - ZIG socket, 1.3 m
23.34 EUR
This compact socket is designed for all devices that need to be powered on the motorcycle, scooter or quad. Primarily navigation devices, cell phones, etc.. Of course, it then also becomes interesting to use this battery interface immediately for battery conservation.
The ''inside'' consists of high-quality components, which are also used by the European automotive industry. A connector sits here best possible and tight in the housing!
• most compact design in aluminum housing
• high quality plug contacts
• long connection cable: 1.3 m / 1 mm²
• integrated mounting bracket for handlebar or linkage
• possibility for hole mounting
Note for mounting
The cigarette lighter on-board socket can be easily mounted on the linkage or handlebar with the integrated mounting bracket using cable ties. Panel mounting with trim hole (27 mm) is also possible. The long 1.3 m connection cable extends to the handlebar. The accessory fuse can be mounted freely in an ideal position in the vehicle.
FREI KRAD BS11 - Motorcycle - system board socket
27.21 EUR
System on-board socket for fixed installation.For jump starting/giving, battery charging, as well as for powering accessories with the appropriate plug.
• splash-proof with hinged cover
• short time current 90 A
• strong copper cable: 0,65 m /6 mm²
• hole diameter: 26 mm
FREI HALTER 2XUM3-KA - Holder for 2 AA batteries with connection cable
10.77 EUR
Battery holder for 2x AA batteries, inserted side-by-side. Connected using attached connection cables.
FREI KRAD BA12 - Motorcycle - angle plug, DIN4165, 8 A
17.18 EUR
This compact DIN angled plug fits e.g. the BMW standard on-board socket. Due to the angled cable outlet, the cable does not stand out as far as conventional plugs when driving.The plastic housing can be unscrewed and you will find the possibility to screw or solder the cables + and -.
• high quality screw contacts
• only 2 parts
• compact design
FREI KRAD LZ40 - Motorcycle - charging / measuring clamp, 40 A, red
12.53 EUR
Red charging and measuring clamp 40 A with sheet steel frame and full insulation.It offers a flat receptacle connection with 6.3 mm or the solder connection.
• compact design
• full insulation
• wide opening range (also for car batteries)
dimensions
• length: 80 mm
• connection: 6.3 mm flat plug sleeve or solder connection
• clamping range: 25 mm
FREI KRAD BA13 - Motorcycle - DIN plug, 4165, 15 A
15.64 EUR
Inside you will find solid screw terminals to hold the cable.• high quality screw contacts
• only 2 parts
• compact design
FREI HALTER 10XUM3-KA - Holder for 10 AA batteries with cable
11.4 EUR
Battery holder for 10x AA batteries inserted next to each other/on both sides. Connected using attached connection lines.
FREI HALTER 3XAAAK - Battery holder, 3x Micro ''AAA''
10.97 EUR
Battery holder suitable for cells of the design:3X Micro (AAA)
Dimensions: 65 x 38 x 15 mm
Connection: with connection cable
Design: sealed enclosure with on/off switch
FREI HALTER 1XAAK - Battery holder, 1x Mignon ''AA''
10.29 EUR
Battery holder suitable for cells of the design:1X Mignon (AA)
Dimensions: 57 x 17 x 14 mm
Connection: with connection cable
FREI HALTER 2XAAK - Battery holder, 2x Mignon ''AA''
10.42 EUR
Battery holder suitable for cells of the design:2X Mignon (AA)
Dimensions: 109 x 16.5 x 14 mm
Connection: with connection cable
FREI HALTER 8XAAK - Battery holder, 8x Mignon ''AA''
10.97 EUR
Battery holder suitable for cells of the design:8X Mignon (AA)
Dimensions: 111 x 31.5 x 29.5 mm
Connection: with connection cable
FREI DEBO BAT 2X AAA - Developer boards - Battery case for micro:bit / Calliope Mini, 2
11.5 EUR
Battery holder for 2x Micro AAA with switch for micro:bit / Calliope MiniSuitable battery holder for micro:bit or Calliope Mini
Features
• for cells of the type: 2x Micro (AAA)
• with practical slide switch
• with connection cable (approx. 14cm) and JST PH2.0 plug
Dimensions (LxW): 6.5 x 2.8 cm
FREI KRAD LZ41 - Motorcycle - charging / measuring clamp, 40 A, black
12.53 EUR
Black charging and measuring clamp 40 A with sheet steel frame and full insulation.It offers a 6.3 mm flat receptacle connection or the solder connection.
• compact design
• full insulation
• wide opening range (also for car batteries)
dimensions
• length: 80 mm
• connection: 6.3 mm flat plug sleeve or solder connection
• clamping range: 25 mm
FREI KRAD BA18Z - Cable extension for battery disconnect switch BA18, 20 cm
14.07 EUR
Cable extension for mounting the BA18 battery disconnector. This allows the vehicle's positive cable to be extended, making it easier to find a good position for the battery disconnector in the tight battery compartment.
Features
• cable extension 200 mm
• with stainless steel screws and heat-shrink tubing
• flexible positioning of the BA18 battery disconnector
FREI KFZ KOMPRESSOR - Car air compressor up to 18 bar, 12 V
26.28 EUR
Due to its extremely high pumping capacity, this air compressor is ideally suited for inflating car and motorcycle tyres as well as sporting goods. Features
• handy and powerful
• pressure indication by manometer
• power supply via 3 m long car connection cable
• quick release with 2 nozzles and 1 needle adapter
• Pressure output: max. 18 bar
• Operating voltage: 12 Volt
• power consumption: max. 10 ampere
• delivery volume: 4,5 L/min
• Colour: black
• Material: aluminium injection moulding, steel, ABS
• dimensions: 148 x 110 x 53 mm
• Packaging: sales box