ADAFRUIT DEBO LED NP16 - Developer Boards - NeoPixel Ring with 16 WS2812 RGB LEDs
23.8 EUR
Browse the detailed sheet with complete information, compare prices and identify the features of PRODUCTNAME, proposed at the cost of PRICE CURRENCY; belongs to the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
16 ultrabright LED Neopixels arranged in a circle.
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
16 ultrabright LED Neopixels arranged in a circle.
- 16 individually addressable RGBs
- voltage range: 4 - 7 V
- outside diameter: 44.5 mm
- inside diameter: 31.7 mm
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
FREI DEBO BUTTON MTX2 - Developer boards - Button Matrix, 16 buttons
11.71 EUR
Button Matrix, 16 buttons• 4 x 4 matrix keyboard
• 16 buttons
• single chip expansion keyboard
• extremely high quality buttons
ADAFRUIT DEBO LED NP12 - Developer Boards - NeoPixel Ring with 12 WS2812
20.13 EUR
12 ultrabright LED Neopixels arranged in a circle.- 16 individually addressable RGBs
- voltage range: 4 - 7 V
- outside diameter: 36.8 mm
- inside diameter: 23.3 mm
FREI DEBO 6PIN 10PIN - Developer boards - 6 pin to 10 pin adapter
11.5 EUR
10 Pin to 6 Pin Adapter AVRISP/USBASP/STK500Convert ATME ISP standard 10PIN to standard 6PIN interface.
It facilitates you to program MinSys, Arduino UNO R3, Arduino Mega2560 and so on.
FREI DEBO LED 16X16 - Developer Boards - LED Dot-Matrix 16 x 16
18.99 EUR
LED Dot Matrix 16 x 16This module is a 256 red LED matrix that can be easily controlled using the Led Control library. Display your own custom characters, or use multiple modules together to create a scrolling display.
Specifications
• Color: red
• Supply voltage: 5V DC
• dimensions (L x W x H): 150 x 120 x 5 mm
FREI DEBO RELAIS 16CH - Developer boards - relay module, 16-channel, 12 V
29.07 EUR
With this 16-channel relay module, large loads can be easily controlled/switched with 5 V from a microcontroller, e.g. Raspberry Pi, Arduino.... can be controlled / switched. All connections are accessible via screw terminals and can therefore be easily connected to a Raspberry Pi or other board using Dupont cables, for example. The definable switching level can be used to switch with either a high or a low level.Features
- 12 V interface card with 16 relays
- Driver current only 15 - 20 mA
- Switching capacity 250 V AC / 10 A or 30 V DC / 10 A
- Standard interface
- Indicator LEDs for each channel
- Dimensions: 120 x 90 x 20 mm
FREI DEBO RELAY 8WAY - Developer boards - 8-way solid state relay, 5V, 240V/2A
30.57 EUR
8-channel solid state relay with fuse and built-in damping circuitTechnical features
- Relay type: Omron 1565E G3MB-202P
- Output voltage 100 - 240 V AC
- switching thresholds: 0 - 2.5 V =OFF / 3 - 5 V = ON
- with zero crossing
- Isolation by phototriak
Connections
- DC+:Power supply ( 5 V DC)
- DC-: Ground connection
- IN1 ... IN8: Signal output, active at high level
FREI DEBO 2WD SPEED - Developer Boards - Speed/Distance Measurement Module
12.43 EUR
Geschwindigkeitsmessung für Zweirradantriebe aus einem Modul mit zwei Gabellichtschranken.Unterbrechungen zum Beispiel durch Spalte in den Felgen können als Unterbrechnung des Signals erkannt und ausgewertet werden. Integrierte Schmitt-Trigger sorgen für ein stabiles Signal!
Technische Daten
- Versorgung über 5 V DC
- Ausgang 5 V TTL
- Schmitt-Trigger
Anschlussbelegung
- 1 - Spannungsversorgung
- 2 - Masse
- 3 - Ausgang 1
- 4 - Ausgang 2
FREI DEBO LVL KA2284 - Developer boards - Voltage level indicator, KA2284
11.86 EUR
Batteriestandsanzeige mit fünf LED-Leuchten, die mit steigender Spannung nach und nach aufleuchten.Der AC- und DC-Eingang dieses Moduls kann durch einen Jumper ausgewählt werden und er kann Spannungen von 3,5 V bis 12 V verarbeiten.
• Chip: KA2284
• Versorgungsspannung: 3,5 V - 12 V
• Einstellbarer Leistungspegelbereich
• AC/DC - Eingang wird durch einen Jumper geregelt
• Maße PCB: 29 x21 mm
FREI DEBO2 SEN STROM - Developer boards - current sensor up to 5 A, ACS712ELC-05B
13.26 EUR
Das Gerät besteht aus einer präzisen, linearen Hall-Sensor-Schaltung mit geringem Offset.Der durch fließende Strom erzeugt ein Magnetfeld, das vom integrierten Hall-IC C erfasst und in eine proportionale Spannung umgewandelt wird.
Die Genauigkeit des Geräts wird durch die Nähe des magnetischen Signals zum Hall-Wandler optimiert.
Technische Daten
• Versorgungsspannung: 5 V
• Chipsatz: ACS712ELC-05B
• Ausgangssignal: 185 mV/A
• mit Schraubklemme
FREI DEBO TOUCH - Developer Boards - Capacitive Touch Sensor
10.91 EUR
This capacitive pushbutton is ideal for switching operations without wear or mechanical actuation. The module is simply connected to a supply voltage and outputs a high level via the I/O connector when approached. Due to the capacitive functionality, the module can also be installed behind objects such as thin glass panels or cabinet doors.Technical data
- Supply voltage: 2.4 ... 5,5 V
- dimensions: 15 x 11 mm
Delivery without 10 Cent coin
FREI DEBO SEN ULTRA - Developer boards - Ultrasonic distance sensor, HC-SR04
13.88 EUR
The ultrasonic module works at a distance range from 3 to 400 cm. The maximum deviation in this regard is just 0.3 millimetres. This module is also ideal for mobile use thanks to its compact size and high-quality finish.• Range: 3 to 400 cm
• Operating voltage: 5 V DC
• Frequency: 40 kHz
• Trigger pulse width: 10 µs
• High measuring accuracy (maximum deviation: 0.3 mm)
Dimensions: 43 x 20 x 15 mm
FREI DEBO RELAY2 4CH - Developer boards - Relay module, 4 channels, 5 V
15.95 EUR
This 4-channel relay module with an operating voltage of 5V is suitable for applications in automation technology and offers simple control of loads via digital signals. It is compatible with various microcontroller platforms such as Arduino (or a compatible board such as Dasduino).Technical specifications:
- Voltage: 5 V
- Number of channels: 4
- Contact load: 10 A
- Relay: mechanical
- Control signal: 5 V TTL
The relay module enables the control of up to four different devices or circuits via the control pins of the microcontroller. It has mechanical relays that can switch up to 10 A at 24 V. It is controlled via 5 V TTL signals, which makes it easy to integrate into existing systems. The robust relay contacts are suitable for a wide range of applications in automation technology, such as controlling motors, lights or other electrical devices.
FREI DEBO GESTURE 9X - Developer boards - gesture recognition 9-fold, PAJ7620U2
18.43 EUR
This board contains the gesture recognition sensor PAJ7620U2, which can be accessed via I2C.It can recognize 9 different gestures: Up, down, left, right, forward, backward, circle clockwise and counterclockwise, and waving. The PAJ7620U2 can also be used to detect approaching and distant objects.
Features
• Operating voltage: 1.8 ... 3,3 V
• Operating temperature: -40 ... +85 °C
• Recognition of 9 gestures
• Gesture speed Normal mode: 60°/s to 600°/s
• Gesture speed Gaming Mode: 60°/s to 1200°/s
• Immunity to ambient light: < 100k Lux
• built-in proximity detection
• flexible energy saving scheme
• I2C interface up to 400 kbit/s, pull-up voltage from 1.8V to 3.3V
• Ambient light noise reduction
• Dimensions (LxWxH): 14 x 14 x 5 mm
FREI DEBO1 3.7LI 0.5A - Developer boards - Charger board for 3.7V Li batteries, Mini-USB
13.26 EUR
With this charger board lithium polymer batteries can be charged via Mini USB.Technical data
• Input: Mini USB type B socket
• Output: JST PH 2.0 2-pin female
• Input voltage: 5 V
• Output voltage: 4.1 ... 4,5 V
• Charge current: 500 mA
• built-in chipset: MCP73831
LED status
• fast flashing: no battery connected
• permanently lit: Charging
• very faint glow: wrong polarity
• off: Battery fully charged
FREI DEBO TOUCH SENS2 - Developer boards - Board for capacitive touch sensors, MPR121
12.53 EUR
The MPR121 is a capacitive touch sensor controller that is controlled via I2C interface. Conductive surfaces can be used as capacitive touchpads and controlled via the module. The chip can control up to twelve separate electrodes, plus a simulated thirteenth electrode. The MPR121 also has 8 LED driver pins. If these pins are not configured as electrodes, they can be used to drive LEDs.Features
• Operating voltage:1.71 ... 3.6 V DC
• Operating temperature: -40 ... +85 °C
• Dimensions (LxW): 31 x 20 mm
2 matching pin headers included in the scope of delivery
FREI DEBO XH-W1209 T - Developer Boards - Thermostat, 12 V, digital, W1209
13.83 EUR
This thermostat module can be used to switch a consumer at a desired definable temperature. The module can be programmed via the LED display with different option codes.- Temperature range: -50 ... +110 °C
- Resolution: 0.1°C (-9.9 ... 99.9 °C), 1 °C (other ranges)
- Measuring accuracy: 0.1°C
- Update rate: 0.5 s
- Operating voltage: 12 V DC
- Current consumption static: 35 mA
- Current consumption when relay is energized: 65 mA
- Measuring probe: NTC (10K 0.5 %) water-protected
- Output: 1 channel relay / 10 A
- Operating temperature: -10 ... +60 °C / Humidity: 20 ... 85%
- Cable length measuring probe: approx. 50 cm
- 4 holes for screw mounting (M3.0) or for installation in an optional housing
- PCB dimensions: 50 x 40 x 16 mm
Note: The module stores all data in case of power interruption.
ADAFRUIT DEBO AMP 16BIT - Developer boards - A/D amplifier board, 16-bit, ADS1115
29.38 EUR
The ADS1115 amplifier board provides 16-bit precision at 860 samples per second- 4-channel
- with one amplifier with programmable gain
- Voltage range: 2 - 5.5 V
- Dimensions: 25.4 x 17.8 x 4.6 mm
FREI DEBO GAS2 MQ135 - Developer boards - Gas sensor, benzene/fume, MQ-135
13.57 EUR
Sensor for measuring the concentration of benzone, alcohol, smoke in the air e.g. to detect gas leaks. (gas alarm) or to measure the air quality. The threshold value from which the module responds can be adjusted via a potentiometer.Please note that the sensor is heated up and operated warm. Exact measurement results are only delivered when the sensor is warm.
Technical data
• Measuring range gas concentration: approx. 10 ... 10.000 ppm
• Input voltage (VCC) : 5 V
• GND: ground connection
• AOUT: Analog output (0.1 ... 4 V)
• DOUT: Digital output (1/0 0.1V/5V)
• Dimensions (LxWxH): 32 x 22 x 27 mm
Note
Attention: The sensor gets warm during operation!
ADAFRUIT DEBO MOTODRIVER4 - Developer boards - servo driver, 16 channel, 12 bit, PCA9685
29.38 EUR
PWM driver board with integrated clock• 6-address dialing pins
• adjustable frequency PWM up to about 1.6 kHz
• 12 bit resolution for each output
• configurable push-pull or open-drain output
• Dimensions: 62.5 x 25.4 x 3 mm
Scope of delivery
• Servo driver board
• solderable power terminal
• various solderable connectors
FREI DEBO SEN HR202 - Developer boards - Humidity sensor, HR202
11.71 EUR
Der HR202 ist ein einfach aber extrem kostengünstiger digitaler Feuchtigkeitssensor. Er eignet sich besonders zum Anschluss an Raspberry und Arduino, es wird kein zusätzlicher Treiber benötigt.Merkmale
- Betriebsspannung: 3,3 ... 5 V DC
- Messbereich: 20 ... 95 %RH
- Ansprechzeit: 20s (hygroskopisch), 40s (außerhalb der Nässe)
- Genauigkeit: 5 % RH
- Stabilität: 1 % RH/Jahr
FREI DEBO1 3.7LI 1.0A - Developer boards - Charger board for 3.7V Li batteries, USB-C, 1
12.22 EUR
This charger board with TC4056 chipset can be used to charge a single lithium-ion or lithium-polymer battery. The input can be either a USB Type C connector or solder pads. The battery is connected via solder pads. Due to the additional output and the protection circuit, a terminal device can be permanently supplied with power. Technical Data
• chipset: TC4056A
• charging method: linear charge
• charging current: 1 A default, optionally adjustable
• charge accuracy: 1,5%
• Input voltage: 4,5 ... 5,5 V
bulletpoint# end of charge voltage: 4.2 V
bulletpoint# blue LED: charge complete
• red LED: charging in progress
• input: USB Type-C socket or solder pads
• output: solder pads
• Operating temperature: -10 ... +85 °C
• Dimensions (LxWxH): 29 x 18 x 4 mm
Setting the charging current
By default the board charges with a charging current of 1000 mA. By changing the resistor R3, the charging current can be set lower.
30 kOhm = 50 mA
20 kOhm = 70 mA
10 kOhm = 130 mA
5 kOhm = 250 mA
4 kOhm = 300 mA
3 kOhm = 400 mA
2 kOhm = 580 mA
1,5 kOhm = 780 mA
1,33 kOhm = 900 mA
1,2 kOhm = 1000 mA
Note
This board only works with a standard Raspberry Pi USB-C power supply or with a power supply with a passive cable or without Power Delivery!
ADAFRUIT DEBO SHD MOTOR - Developer Boards Shield - Servo, 16 Channel, 12 Bit, PCA9685
35.27 EUR
PWM driver Shield with integrated clock- 6 address selection pins
- adjustable frequency PWM up to approx. 1.6 kHz
- 12 bit resolution for each output
- configurable push-pull or open-drain output
- Dimensions: 54 x 70 x 3 mm
IDUINO DEBO LED 8X8 - Developer boards - LED dot-matrix 8 x 8, RGB
27.32 EUR
It is an RGB LED dot matrix driver compatible with Arduino. It pairs the M54564 with a single DM163 constant current driver.By using the DM163 it gets three 8+6 bit channels for hardware PWM control of the LEDs - This makes the ATmega328 much less busy.
Specifications
• support for 8-bit colors with 6-bit correction for each color in each dot
• 16 MHz PWM support
• dedicated GPIO and ADC interface
• hardware UART and IIC communication with easy cascading
• 24 constant current channels with 100 mA each
• 8 super-source driver channels with 500 mA each
FREI DEBO BME280 - Developer Boards - Temperature, Humidity and Pressure Sensor, BM
16 EUR
The Bosch BME280 is a 3 in 1 ambient sensor that combines humidity, air pressure and temperature measurements. It has a digital I2C and SPI interface.Technical data
- Operating voltage: 1.71 ... 3,6 V
- Dimensions (LxWxHx): 15.3 x 11.5 x 2.5 mm
Properties BME280
- air humidity
- Reaction time (t63%) 1s
- Accuracy tolerance ±3 % relative humidity
- Hysteresis = 2% relative humidity
- air pressure
- pressure range 300 .... 1100 hPa (equivalent to +9000 .... -500 m above/below sea level)
- relative accuracy ±0.12 hPa, corresponds to ±1 m (950 .... 1050 hPa @25°C)
- absolute accuracy typ. ±1 hPa (950 ...1050 hPa, 0 ... 40 °C)
- temperature
- Operating range Operating: -40 ... +85 °C
- full accuracy 0 ... 65 °C
Delivery incl. pin header
FREI DEBO BH 1750 - Developer Boards - Digital Light Sensor, BH1750
12.22 EUR
BH1750 digital light sensor with 5-pin header.Technical data
- Data area: 0 - 65535
- Operating voltage: 3 - 5 V DC
- Connections accessible via 5-pin header (2.54-mm pitch)
- Mounting holes: 2.8 mm
- Dimensions: 18.5 x 13.5 x 2.3 mm
Included in delivery
- Light module
- 5-pin header
FREI DEBO TAST 4X3 - Developer boards - membrane keyboard, 4 x 3 digits
12.12 EUR
Universal 4 x 3 membrane keyboard with the numbers 0 - 9 and the characters * and #.Technical data
- 4 x 3 = 12 buttons
- 7-pin connector with 2.54-mm pitch
- Adhesive backing on the rear for easy mounting
- Dimensions: 70 x 77 x 1 mm
- Length of cable and connector: 88 mm
JOY-IT DEBO CTRLR PS - PlayStation-style game pad development board
28.35 EUR
With this PlayStation-style game pad, you can directly control various microcontrollers via wireless using the buttons and analogue joysticks.Technical data
- Frequency: 2.4 GHz
- Operation: 2 analogue joysticks, 16 buttons
- Power supply: controller 2x AAA batteries, receiver 3.3 V
- Range: up to 8 m
- Special features: vibration
- Controller dimensions: 156 x 95 x 60 mm
- Receiver dimensions: 48 x 200 x 11 mm
FREI DEBO POWER 1117 - Developer boards - voltage regulator 3.3 V, 1117
13.52 EUR
Diese winzige Platine enthält einen Spannungsregler des Typs AMS1117, die nötige Zusatzbeschaltung und zwei 2-polige Stiftleisten zum Anschluss. Für einen hohen Stromausgang wird die gesamte Platine über einen Aluminiumkühlkörper gekühlt.Merkmale
- 3,3 V LDO Spannungsregler
- maximal 1 A Ausgangsstrom
- Anschluss: Stiftleiste
- inklsuive Kühlkörper
- Maße: 14,5 x 32 mm
JOY-IT DEBO USB-PD 3 - Developer boards - USB-PD trigger module, USB-C to solder pads
21.53 EUR
With this small module you can trigger USB-PD protocols and thus charge your laptop via a PD-capable USB-C power supply, for example. The output voltage is adjustable in 5 steps (5 V, 9 V, 12 V, 15 V and 20 V) via the button integrated on the module. The currently selected voltage can be read from the color of the RGB LED integrated on the module (red = 5 V / yellow = 9 V / green = 12 V / light blue = 15 V / dark blue = 20 V / purple = highest possible voltage). Due to its output interfaces, the module can be used flexibly and is easy to integrate.Technical details
• input voltage up to 20 V / 100 W (via a PD-capable USB-C power supply unit)
• input interface: USB-C
• Output voltage: 5/9/12/15/20 V (adjustable via knob)
• Output current: max. 5 A
• output power: max. 100 W
• Output interface: solder pads (for USB-A or screw terminal)
• dimensions (LxWxH): 31.5 x 15 x 14 mm
Note
• USB-C power supply not included in delivery
JOY-IT DEBO USB-PD 4 - Developer boards - USB-PD trigger module, solder pads
16.14 EUR
With this small module, you can trigger USB PowerDelivery protocols and thus charge your laptop via a PD-capable USB-C power supply, for example. The output voltage is adjustable in 5 steps (5 V, 9 V, 12 V, 15 V and 20 V) via the button integrated on the module as well as via the trigger input. The currently selected voltage can be read from the color of the RGB LED integrated on the module. The module is flexible to use and easy to integrate due to its interfaces and design.Specifications
• Output voltage: 5 ... 20 V
• supply voltage: up to 20 V / 100 W
• output current: max. 5 A
• output power: max. 100 W
• input interface: solder pads
• output interface: solder pads
Note
Power supply not included
FREI DEBO KABELSET9 - Developer boards - jumper cable, 10cm, 3x 40 cables
15.69 EUR
With this jumper cable set a Raspberry Pi, Arduino or other developer boards can be connected quickly and easily to a breadboard or to modules/sensors. The set contains 3 different cables (Female-Female, Male-Male, Female-Male). Each cable consists of 40 single wires, which can also be separated.Details
- each cable consists of 40 wires
- Cores can also be separated
- 2,54mm Pin Distance (Pitch)
- Inner conductor: AWG 28 copper
- length: 10cm
Scope of delivery
- 3x jumper cables á 40 wires (1x female - female (jacks - jacks) / 1x male - male (plug - plug) / 1x female - male (jacks - plug))
FREI DEBO DCDC DOWN 4 - Developer boards - voltage regulator, DC/DC converter
12.01 EUR
Small Step-Down Converter with adjustable output voltageTechnical properties
• Input voltage: 4.75 ... 23 V DC
• Output voltage: 1 ... 17 V DC (adjustable)
• Max. output current (permanent): 1.8 A
• Max. output current (short time): 3 A
• Conversion efficiency max. 96
• switching frequency 340 KHz
• Operating temperature: -40 ... +85 °C
• Dimensions (LxWxH): 18 x 12 x 4.5 mm
FREI DEBO KABELSET8 - Developer boards - jumper cable, 20cm, 3x 40 cables
14.6 EUR
With this jumper cable set a Raspberry Pi, Arduino or other developer boards can be connected quickly and easily to a breadboard or to modules/sensors. The set contains 3 different cables (Female-Female, Male-Male, Female-Male). Each cable consists of 40 single wires, which can also be separated.Details
- each cable consists of 40 wires
- Cores can also be separated
- 2,54mm Pin Distance (Pitch)
- Inner conductor: AWG 28 copper
- length: 20cm
Scope of delivery
- 3x jumper cables á 40 wires (1x female - female (jacks - jacks) / 1x male - male (plug - plug) / 1x female - male (jacks - plug))
ADAFRUIT DEBO AMP THERMO2 - Developer Boards - Thermocouple Amplifier, AD8495
26.44 EUR
thermocouple amplifier- detection accuracy range: ± 2°C
- temperature range: -250 to +750°C
- supply voltage: 3 - 18 V
- supplied with 2-pin terminal
- only thermocouples of type K
- Dimensions: 20 x 16 x 2 mm
FREI DEBO I2C-MULTI2 - Developer boards - Board I2C multiplexer, TCA9548A
12.84 EUR
On this small board up to 8 devices can be connected to a microcontroller via the I2C interfaces.- Selectable I2C address: 0x70 to 0x77
- Dimensions: 32 x 22 x 3 mm
FREI DEBO2 3.7LI 1.0A - Developer boards - Charger board for 3.7V Li batteries, Micro-US
11.29 EUR
This charger board with TC4056 chipset can be used to charge a single lithium-ion or lithium-polymer battery. The input can be either a Micro-USB type B connector or solder pads. The battery is connected via solder pads.Technical data
• Chipset: TC4056A
• Charging method: linear charge
• Charge current: 1 A default, optionally adjustable
• Charge accuracy: 1.5%
• Input voltage: 4.5 ... 5,5 V
• Final charge voltage: 4.2 V
• blue LED: charge complete
• red LED: charging in progress
• Input: Micro-USB type B female or solder pads
• Output: solder pads
• Operating temperature: -10 ... +85 °C
• Dimensions (LxWxH): 25 x 19 x 10 mm
Setting the charging current
By default the board charges with a charging current of 1000 mA. By changing the resistor R3 (0603 design), the charging current can be set lower.
30 kOhm = 50 mA
20 kOhm = 70 mA
10 kOhm = 130 mA
5 kOhm = 250 mA
4 kOhm = 300 mA
3 kOhm = 400 mA
2 kOhm = 580 mA
1.5 kOhm = 780 mA
1.33 kOhm = 900 mA
1.2 kOhm = 1000 mA
FREI DEBO3 3.7LI 1.0A - Developer boards - Charger board for 3.7V Li batteries, Micro-US
11.86 EUR
This charger board with TC4056 chipset can be used to charge a single lithium-ion or lithium-polymer battery. The input can be either a Micro USB type B connector or solder pads. The battery is connected via solder pads. With the additional output and the protection circuit, a terminal device can be permanently supplied with power. Technical data
• Chipset: TC4056A
• Charging method: linear charge
• Charge current: 1 A default, optionally adjustable
• Charge accuracy: 1.5%
• Input voltage: 4.5 ... 5,5 V
• Final charge voltage: 4.2 V
• blue LED: charge complete
• red LED: charging in progress
• Input: Micro USB Type B female or solder pads
• Output: solder pads
• Operating temperature: -10 ... +85 °C
• Dimensions (LxWxH): 29 x 18 x 4 mm
Setting the charging current
By default the board charges with a charging current of 1000 mA. By changing the resistor R3, the charging current can be set lower.
30 kOhm = 50 mA
20 kOhm = 70 mA
10 kOhm = 130 mA
5 kOhm = 250 mA
4 kOhm = 300 mA
3 kOhm = 400 mA
2 kOhm = 580 mA
1.5 kOhm = 780 mA
1.33 kOhm = 900 mA
1.2 kOhm = 1000 mA
FREI DEBO KABELSET23 - Developer boards - jumper cable, 40cm, 3x 40 cables
17.34 EUR
With this jumper cable set a Raspberry Pi, Arduino or other developer boards can be quickly and easily connected to a breadboard or to modules/sensors. The set contains 3 different cables (Female-Female, Male-Male, Female-Male). Each cable consists of 40 single wires, which can also be separated.Details
• each cable consists of 40 cores
• cores can also be separated
• 2,54mm pin spacing (pitch)
• inner conductor: AWG 28 copper
• length: 40cm
Scope of delivery
• 3x jumper cable á 40 wires (1x Female - Female (female - female) / 1x Male - Male (male - male) / 1x Female - Male (female - male))
FREI DEBO KABELSET21 - Developer boards - jumper cable, 40 poles, f/m, 40 cm
13.26 EUR
40 jumper cables for the usual 2.54mm pitch with sockets on one side and connectors on the other.Technical data
• 40 pieces a 40 cm
• socket to plug
• copper cable