DELOCK 66499 - Microphone, USB, with Gooseneck
33.67 EUR
Consult the informative sheet with in-depth details, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; falls into the CATEGORY NAME; the product is marketed by SELLER NAME and produced by MANUFACTURER NAME.
This USB microphone by Delock can be used for voice and vocal transmissions.
Optimal recordings
The microphone has a cardioid polar pattern (unidirectional) and captures the sound ideally. Due to a high power, low self-noise and precise performance, even the finest sounds are optimally recorded.
Mute button & LED ring
With the mute button in the middle of the microphone, the microphone can be quickly muted. The LED ring signals operational status with a blue or red light.
Flexible gooseneck
With the gooseneck, the microphone can be bent in the preferred direction.
Plug & Play
Due to USB Plug & Play the microphone is ready to use immediately, no driver installation is needed. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux.
Specification
System requirements
EAN: 4043619664993
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 6-8 business days
Condition: new
This USB microphone by Delock can be used for voice and vocal transmissions.
Optimal recordings
The microphone has a cardioid polar pattern (unidirectional) and captures the sound ideally. Due to a high power, low self-noise and precise performance, even the finest sounds are optimally recorded.
Mute button & LED ring
With the mute button in the middle of the microphone, the microphone can be quickly muted. The LED ring signals operational status with a blue or red light.
Flexible gooseneck
With the gooseneck, the microphone can be bent in the preferred direction.
Plug & Play
Due to USB Plug & Play the microphone is ready to use immediately, no driver installation is needed. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux.
Specification
- Connector: 1 x USB 2.0 Type-A male
- Directivity: unidirectional
- Sensitivity: -35 dB +/- 3 dB
- Frequency range: 70 Hz - 15 kHz
- Sample rate: 16 Bit / 48 kHz
- Mute-Button
- Gooseneck, length ca. 7 cm
- Status LED
- Dimensions (LxWxH): ca. 196 x 23 x 23 mm
- USB bus powered
- Plug & Play
System requirements
- Chrome OS
- Linux Kernel 3.3 or above
- Mac OS 10.9 or above
- Windows 8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
EAN: 4043619664993
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 6-8 business days
Condition: new
Comparison of Similar Products
Optimal recordings
The microphone has a circle pattern (omnidirectional) and therefore captures the acoustic signal ideally. Due to a high power, low self-noise and precise performance, even the finest sounds are optimally recorded.
Mute button & blue LED light
With the star shaped mute button in the middle of the microphone, the microphone can be muted very quickly. In mute mode the LEDs are switched off. In addition, the microphone has a switch on the side, which can be used to completely deactivate or reactivate the LEDs.
Flexible gooseneck
With the gooseneck, the microphone can be bent in the preferred direction.
Headphone output
The microphone has a 3.5 mm stereo jack output at the rear for connection of e.g. headphones or speakers.
Rugged cable
The 1.5 m long USB cable has a braided sleeving and a gold-plated USB plug and is therefore very rugged and has a high resistance to disturbances.
Plug & Play
Due to USB Plug & Play the microphone is ready to use immediately, no driver installation is needed. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux.
Specification
- Connectors: 1 x USB 2.0 Type-A male, 1 x 3.5 mm 3 pin stereo jack female
- Directivity: omnidirectional
- Sensitivity: -30 dB +/- 3 dB
- Frequency range: 50 Hz - 16 kHz
- Sample rate: 16 Bit / 44.1 kHz
- Signal-to-noise ratio (SNR): ca. 60 dB
- Impedance: 2.2 kOhm
- Mute-Button
- LED on / off button
- Cable length: ca. 1.5 m
- USB bus powered
- Plug & Play
System requirements
- Chrome OS
- Linux Kernel 4.4 or above
- Mac OS 10.9 or above
- Windows 7/7-64/8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Package content
- USB microphone
- User manual
Specification
- Connector: 1 x USB 2.0 Type-A reversible male
- Sensitivity: -37 dB +/- 3 dB
- Frequency range: 70 Hz - 15 kHz
- Impedance: 2.2 kOhm +/- 30% at 1 kHz
- Sample rate: 16 Bit / 48 kHz
- Touch Mute-Button
- Gooseneck
- Status LED
- Rubber Base
- Colour: black
- Cable length: ca. 1.7 m
- Dimensions (LxWxH): ca. 140 x 60 x 60 mm
- USB bus powered
- Plug & Play
System requirements
- Windows 7/7-64/8.1/8.1-64/10/10-64, Linux ex Kernel 3.3 / Kernel 4.9.x, Mac ex OS 10.9
- PC or laptop with a free USB Type-A port
Package content
- USB-microphone
- User manual
Specification
- Connector: 1 x USB 2.0 Type-A reversible male
- Directivity: uni-directional
- Sensitivity: -44 dB +/- 3 dB
- Frequency range: 70 Hz - 9 kHz
- Sample rate: 16 Bit / 48 kHz
- Function key: 1 x On / Off switch, 1 x mute switch
- Gooseneck, length ca. 25 cm
- Status LED
- Rubber Base
- Colour: black
- Cable length: ca. 1.7 m
- Dimensions (LxWxH): ca. 120 x 85 x 320 mm
- USB bus powered
- Plug & Play
System requirements
- Windows 7/7-64/8.1/8.1-64/10/10-64, ex Linux Kernel 3.3, ex Mac OS 10.9
- PC or laptop with a free USB Type-A port
Package content
- USB microphone
- User manual
Package
- Retail Box
Optimal recordings
The microphone has a cardioid polar pattern (unidirectional) and captures the sound ideally. Due to a high power, low self-noise and precise performance, even the finest sounds are optimally recorded.
Dual Layer Pop Filter & Windscreen
Due to the included dual layer pop filter and the windscreen, the recording quality is further optimized. Annoying wind noises are optimally filtered.
Plug & Play
Due to USB Plug & Play the microphone is ready to use immediately, no driver installation is needed. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux.
Stable & non-slip stand
The metal base with rubber feet ensures that the microphone stands stable on the table. The shock mount (spider) ensures vibration-free recording. The table stand can be folded and transported easily if required.
Specification
- Connector: 1 x USB 2.0 Type-A male
- Directivity: unidirectional
- Sensitivity: -47 dB +/- 3 dB
- Frequency range: 20 Hz - 20 kHz
- Sample rate: 16 Bit / 44.1 kHz
- Signal-to-noise ratio (SNR): ca. 60 dB
- Impedance: 2.2 kOhm
- Cable length: ca. 1.5 m
- Colour: black
- Dimensions (LxWxH): ca. 150 x 45 x 35 mm
- USB bus powered
- Plug & Play
System requirements
- Chrome OS
- Linux Kernel 4.4 or above
- Mac OS 10.9 or above
- Windows 7/7-64/8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Package content
- USB microphone
- Table stand
- Shock mount (spider)
- Pop filter
- Windscreen
- User manual
- Wireless microphone system for smartphones
- Ultra-compact complete system including charging case
- Simple operation - plug and play
- The two wireless microphones can be clipped on, alternatively they can be attached using magnets. Wind protection built into the microphone
- GainAssist automatic level adjustment
- Crystal-clear audio quality
- Receiver module with integrated USB-C plug
- Modules pair automatically
- Range: 100 m
- Battery life: 7 hours (21 hours with charging case)
- Charging time: three hours
System requirements:
- Android 11, iOS 14 or newer
- USB-C port
Specifications
- Dimensions of transmitter: 40 x 20 x 17 mm
- Weight of transmitter: 12 g
- Dimensions of receiver: 44 x 24 x 9 mm
- Weight of receiver: 6 g
- Dimensions of charging case: 72 x 58 x 30 mm
- Weight of charging case: 61 g
- Incl. two additional miniature furry wind protection sleeves that can be fitted to the microphone
- Incl. 2x magnetic fastenings for the transmitter modules
- Incl. USB-C to USB-C cable
Optimal recordings
The microphone has a 16 mm condenser and a cardioid polar pattern (unidirectional) and therefore ideally captures the sound. Due to high power, low self-noise and precise performance, even the finest sounds are recorded crystal clear.
Dual Layer Pop Filter & Windscreen
Due to the included dual layer pop filter and the windscreen, the recording quality is further optimized. Annoying wind noises are optimally filtered.
High sampling rate
Typical USB microphones work with 16 Bit and 44 KHz. The Delock microphone offers a sampling rate of 24 Bit and 192 kHz, so it is possible to record in Hi-Fi studio quality.
Plug & Play
Due to USB Plug & Play the microphone is ready to use immediately, no driver installation is needed. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux.
Stable & adjustable stand
The stand ensures that the microphone is stable on the table. With the telescopic function, the microphone can be adjusted to the preferred height.
Specification
- Connector: 1 x USB 2.0 Type-B female
- Directivity: unidirectional
- Sensitivity: -38 dB +/- 3 dB
- Frequency range: 30 Hz - 16 kHz
- Sample rate: 24 Bit / 192 kHz
- Signal-to-noise ratio (SNR): ca. 70 dB
- Self-Noise: max. 16 dBA
- Sound pressure level (SPL): max. 120 dB
- Dual-Layer pop filter: Ø 120 mm
- Stand: Ø ca. 130 mm (ca. 600 g)
- USB bus powered
- Plug & Play
System requirements
- Chrome OS
- Linux Kernel 4.4 or above
- Mac OS 10.9 or above
- Windows 7/7-64/8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Package content
- USB microphone
- USB 2.0 Type-A to USB 2.0 Type-B cable, length ca. 2.5 m
- Shock mount (spider)
- Telescopic rod
- Stand
- Pop filter
- Windscreen
- User manual
With clip to attach
It can easily be clipped to a tie or collar.
Optimal recordings
The microphone has a circle pattern (omnidirectional) and therefore captures the acoustic signal ideally. Due to a high performance, low self-noise and precise performance, even the finest sounds are optimally recorded.
High sampling rate
Typical USB microphones work with 16 Bit and 44 kHz. This Delock microphone offers a sampling rate of 24 bit and 192 kHz, so it is possible to record in Hi-Fi studio quality.
High-Res audio headphone output
The microphone has a 3.5 mm stereo jack female port for connecting e.g. headphones or loudspeakers, for example. The audio output provides a bit depth of 32 bits at a sampling rate of 192 kHz.
Plug & Play
Due to USB Plug & Play the microphone is ready to use immediately, no driver installation is needed. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux.
Specification
- Connectors: 1 x USB 2.0 Type-A male, 1 x 3.5 mm 3 pin stereo jack female
- Directivity: omnidirectional
- Sensitivity: -30 dB +/- 3 dB
- Frequency range: 50 Hz - 18 kHz
- Sampling rates: recording up to 24 bit / 192 kHz, playback up to 32 bit / 192 kHz
- Signal-to-noise ratio (SNR): ca. 74 dB
- Cable length: ca. 2 m
- Housing material: metal
- Colour: black / anthracite
- Weight: ca. 30 g
- USB bus powered
- Plug & Play
System requirements
- Chrome OS
- Linux Kernel 3.3 or above
- Mac OS 10.14 or above
- Windows 8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Package content
- USB microphone
- Clip
- Windscreen
- Storage bag
- User manual
Specifications
- Connections:
1x 3.5-mm 4-pin jack (male)
1 x 3.5-mm 3-pin jack socket - Directional pattern: omnidirectional
- Impedance: 2.2 kOhm
- Sensitivity: -32 dB +/- 3 dB
- Frequency range: 100 Hz - 13 kHz
- Dimensions: (L x W x H): approx. 55 x 64 x 143 mm
- Weight: approx. 88 g
- Cable length: approx. 1.7 m
This professional condenser microphone by Delock can be used for high-quality voice and vocal recordings.
Optimal recordings
The microphone has a high-quality 16 mm condenser chip and a cardioid polar pattern (unidirectional) and therefore ideally captures the sound. Due to high power, low self-noise and precise performance, even the finest sounds are recorded crystal clear.
Good windscreen
Due to the included windscreen, the recording quality is further optimized. Disturbing wind noises are optimally filtered.
Multifunctional application
It can be connected to any PC or laptop via the detachable XLR to 3 pin stero jack cable. With the included 4 pin Y-adapter cable, it can also be connected to a tablet or smartphone.
Stable & non-slip stand
The metal stand with rubber feet ensures that the microphone stands stable on the table. The microphone holder can be adjusted in a 180° angle as required. The table stand can be easily folded and transported when needed.
Specification
- Connector: 1 x XLR plug
- Cable:
1 x XLR jack >
1 x 3.5 mm 3 pin stereo jack male - Y-Adapter:
1 x 3.5 mm 4 pin stereo jack male (CTIA standard) >
1 x 3.5 mm 3 pin stereo jack female microphone
1 x 3.5 mm 3 pin stereo jack female headset - Directivity: unidirectional
- Sensitivity: -38 dB +/- 3 dB
- Frequency range: 30 Hz - 16 kHz
- Signal-to-noise ratio (SNR): ca. 70 dB
- Self-Noise: max. 16 dBA
- Sound pressure level (SPL): max. 120 dB
- Cable length: ca. 2.5 m
- Colour: black
- Voltage: 1.5 V
System requirements
- a free stereo port 3.5 mm
Package content
- XLR microphone
- XLR to stereo jack cable
- Y-adapter cable
- Windscreen
- Microphone holder
- Table stand
Package
- Retail Box
With clip to attach
It can easily be clipped to a tie or collar.
Optimal recordings
The omnidirectional polar pattern captures the sound optimally and achieves a high recording quality. This makes it ideal for skyping, interviews, voice recordings, etc.
Multifunctional application
It can be connected to any PC or laptop via the 3 pin stereo jack connector. The 4 pin Y-adapter included in the delivery also allows connection to a tablet or smartphone.
Specification
• Connector:
1 x 3.5 mm 3 pin stereo jack male
• Y-Adapter:
1 x 3.5 mm 4 pin stereo jack male (CTIA standard) >
1 x 3.5 mm 3 pin stereo jack female microphone
1 x 3.5 mm 3 pin stereo jack female headset
• Directivity: omnidirectional
• Impedance: 2.2 kOhm
• Sensitivity: -30 dB +/- 3 dB
• Frequency range: 50 Hz - 16 kHz
• Housing material: metal
• Weight: ca. 15.5 g
• Cable length: ca. 1.8 m
System requirements
• A free stereo port 3.5 mm
Package content
• Microphone
• Clip
• Y-Adapter
• Windscreen
• Storage bag
Package
• Retail Box
Optimal recordings
The microphone has a supercardioid polar pattern and therefore captures the sound ideally. Due to its high power, low self-noise and precise performance, even the finest sounds are recorded crystal clear. Annoying background noises are minimized.
Good windscreen
Due to the included windscreen, the recording quality is further optimized. Disturbing wind noises are optimally filtered.
High compatibility
With its 3.5 mm 4 pin stereo jack male, the microphone is compatible with various smartphones. Due to the included 3.5 mm TRS female adapter, the microphone can also be connected to various DSLR cameras and computers. With the hot shoe adapter, the microphone can be mounted on an accessory shoe of cameras.
No batteries required
The microphone is passive and therefore does not need batteries. This eliminates the need to change batteries.
Stable & non-slip stand
The metal stand with rubber feet ensures that the microphone stands firmly on the table. The adjustable smartphone clamp ensures a smooth recording. The rubberized clamps prevent smartphones from being scratched. The flexible smartphone clamp holds devices with a width of up to 8.5 cm. The ball joint can be rotated by 360° and locked in place. The table stand can be easily unscrewed and folded up when needed.
Specification
- Connector: 1 x 3.5 mm 4 pin stereo jack female
- Coiled Cable: 1 x 3.5 mm 4 pin audio stereo jack male > 1 x 3.5 mm 4 pin audio stereo jack male
- Adapter: 1 x 3.5 mm 4 pin stereo jack female > 1 x 3.5 mm 3 pin stereo jack male (TRRS to TRS)
- Directivity: supercardioid
- Sensitivity: -23 dB +/- 3 dB
- Frequency range: 20 Hz - 12 kHz
- Signal-to-noise ratio (SNR): ca. 70 dB
- Sound pressure level (SPL): max. 110 dB
- Metal stand: Ø ca. 180 mm
- Microphone length: ca. 150 mm
- Smartphone clamp: width up to 8.5 cm
- Hot shoe adapter for mounting on cameras with accessory shoe
System requirements
- A free stereo port 3.5 mm
Package content
- Microphone
- Stereo jack adapter
- Coiled cable, length ca. 10 cm - 60 cm
- Table stand
- Flexible smartphone clamp
- Windscreen
- User manual
Specifications
- Connection: 1x 3.5-mm 3-pin jack (male)
- Y-adapter:
1x 3.5-mm 4-pin jack (male) (CTIA standard) >
1x 3.5-mm 3-pin jack (female) for microphone
1x 3.5-mm 3-pin jack (female) for headphones - Directional pattern: omnidirectional
- Impedance: 2.2 kOhm
- Sensitivity: -32 dB +/- 3 dB
- Frequency range: 100 Hz - 10 kHz
- Dimensions (Ø x H): approx. 60 x 15 mm
- Weight: approx. 65.5 g
- Cable length: approx. 2.5 m
Auto focus and privacy cover
80° wide-view angle
Full HD resolution, 30 frames per second
Perfect for video meetings & live streaming
Automatic low-light correction, auto exposure (AE), auto white balance (AWB), auto flicker correction, color correction, gamma correction, dark level compensation, auto edge enhancement
Dual microphone with noise reduction, 35 dB, high sensitivity
Swivel -90°/+0°, rotation -180°/+180°
Plug-and-play - no driver installation needed
Versatile mounting choices: LCD screens, laptops, desktops or tripod (not included)
Compatible with Windows, Mac OS, Linux, Chrome OS and Android. Works with Skype, Microsoft Teams, Google Meet, Zoom, FaceTime, Facebook Messenger, OBS, XSplit, Twitch and more
6-layer coated lens, aperture f/2.1, focal length 7 cm
Cable length: 1.6 m
- High-quality condenser capsule that delivers warmth and presence for a clear, professional sound.
- Directional cardioid pickup pattern optimised to reduce room sound and other extraneous noise.
- Smooth frequency response that sounds incredible in a wide variety of applications.
- In-built pop filter for reducing plosives.
- Unique detachable magnetic desk stand to mitigate knocks and bumps and is easy to remove.
- Integrated 360-degree swing mount for quick and easy positioning on a desktop, mic stand, or studio arm.
- Studio-grade headphone amplifier with precision level control and switchable zero-latency monitoring for eliminating distracting echo.
- Class-compliant USB output that works seamlessly with computers and tablets, simple to use – just plug in and hit record.
The NT-USB Mini brings the pristine sound quality of RØDE’s world-class studio mics to a compact, easy-to-use desktop USB microphone. Designed to deliver crystal-clear, professional-sounding audio direct to a computer or tablet, it’s the perfect microphone for gamers, podcasters, musicians, streamers, business professionals and content creators who want to be heard in full definition.
The NT-USB Mini features a studio-grade headphone amplifier and a high-quality 3.5mm headphone output, complete with precision volume control, allowing you to easily monitor your audio. There is also a switchable zero-latency monitoring mode for eliminating distracting echo when tracking vocals or recording instruments. It is incredibly easy to set up and use, with simple controls, an in-built pop filter and a class-compliant USB output that works seamlessly with computers or tablets, no drivers or software needed. Just plug into your Mac, PC or tablet with the included USB cable and hit record.
The NT-USB Mini features a unique detachable magnetic desk stand – not only does this provide a sturdy base on any desktop, it also makes it easy to remove and attach to a mic stand or studio arm. This and the unique 360-degree swing mount means you can position the mic wherever it needs to be to get the best recording possible.
The NT-USB Mini is the perfect addition to any desktop or home studio setup. At just 89mm wide and 141mm tall, it’s very compact, taking up only a fraction of precious desktop real estate. It also looks fantastic – sleek and stylish, with clean lines and a modern aesthetic. Hard-wearing steel and reinforced nylon resin construction ensure the NT-USB Mini is ready to take on the rigours of recording anywhere and everywhere.
- Elegant matt copper design
- Stylish three-legged stand made of solid metal with integrated vibration damper
- Versatile thanks to four different directional characteristics: Cardioid, omnidirectional, bidirectional and stereo
- Impressive RGB illumination for an intense gaming or streaming setup
- Gain controller for adjusting the microphone sensitivity
- Compatible with PC, Mac, PS4 and PS5 (plug & play via USB cable)
- Convenient touch-to-mute function
- Headphone jack with integrated volume control in CHERRY design
- Shock mount for superior sound quality without unwanted noise or vibration
The CHERRY UM 9.0 PRO RGB not only impresses with its three-legged stand made of solid metal, which ensures stability, but is also visually striking. Matt black meets stylish copper, which makes this professional USB microphone stand out.
Included in delivery
- Microphone
- USB cable
- User manual
Get The Best Shots
The microphone has a circular directional characteristic (omnidirectional) and thus captures the sound perfectly. High performance, low noise and precise reproduction means that even the finest tones are optimally recorded.
Touch mute button & status LED
The Touch Mute button quickly mutes the microphone. The LED lights up red when muted and green during recording.
Headphone Output
The microphone has a 3.5 mm jack output for connecting e.g. Headphones or speakers.
Plug And Play
Thanks to USB Plug & Play, the microphone is immediately ready for use and no driver installation is necessary. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux.
Specification
- Connections:
1 x USB 2.0 Type-a connectors
1 x 3.5 mm 3 pin jack socket - Directional characteristic: Omnidirectional
- Sensitivity: -16 dB +/- 3 dB
- Frequency range: 100 Hz - 10 kHz
- Sampling rate: 16 bits / 44.1 kHz
- Signal-to-noise ratio (SNR): Approx. 65 dB
- Mute Button
- Status LED
- Cable length: Approx. 1.5 m.
- Color: Black
- Dimensions (Ø x H): Approx. 75 x 19 mm
- USB bus power
- Plug And Play
System Requirements
- Chrome OS
- Linux kernel 4.4 or higher
- Mac OS 10.9 or later
- Windows 7/7-64/8.1/8.1-64/10/10-64
- PC or notebook with a free USB type-a port
Technical data
• Connectors:
1 × USB 2.0 type A plug >
1 x 3.5-mm microphone jack
1 x 3.5-mm speaker jack
• Chipset: CMedia CM119
• Function keys: volume up, volume down, mute
• USB audio device specification 1.0
• USB HID class 1.1
• Supports Virtual 7.1 channel sound, Xear 3D
• USB Bus power
System requirements
• Windows Vista/7/8/8.1, Mac OS 10.8.5, Linux Kernel 3.7
• PC or notebook with a free USB port
Package contents
• USB sound adapter
• Xear 3D software CD (for Windows XP/Vista/7/8)
• User manual
Specification
• Connectors:
1 x USB 3.0 Type-B female >
10 x USB 3.0 Type-A female
1 x 9 - 40 V DC jack
1 x 3 pin terminal power connector
• Chipset: VIA VL817
• Data transfer rate up to:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• 11 x LED indicator
• USB ports with screw holes
• Robust metal housing
• Removable wallmount brackets
• Power supply: Bus-powered or Self-powered
• Flexible power supply with 9 V to 40 V
• Automatic detection of the input polarity of the power connectors
• ESD protection up to 20 kV for all ports
• Dimensions (LxWxH): ca. 202 x 80 x 32 mm
• Colour: black
• Plug & Play
System requirements
• Windows 7/7-64/8.1/8.1-64/10/10-64, Linux ex Kernel 3.16.x, Mac ex OS 10.9
• PC or laptop with a free USB Type-A port
Package content
• Hub USB
• 1 x cable USB A male to USB B male, length ca. 1 m
• 2 x wall mounting brackets
• 1 x mounting for 35 mm DIN rail
• 1 x 3 pin terminal block
• User manual
Specification of the power jack
• 9 - 40 V
• Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 9 mm
Package
• Retail Box
Specification
- Connectors: 1 x USB 2.0 Type-A male, 1 x CF slot, 1 x SD / MMC slot, 1 x MS slot, 1 x xD slot, 1 x M2 slot, 1 x Micro SD slot
- Data transfer rate up to 480 Mbps
- Hot Swap, Plug & Play
- Dimensions (LxWxH): ca. 56.6 x 43.5 x 13.2 mm
Supports following memory cards:
- Slot 1: CF I, CF II, CF4.0, CF Ultra, CF Ultra DMA, CF Ultra II, CF Ultra III, CF Ultra IV, CF Extreme, CF Extreme III, CF Extreme IV, Microdrive, MagicStor
- Slot 2: SD, SD Pro, SD Ultra, SD High Capacity (SDHC), Turbo-SD, SDHC Turbo, SD Ultra, SD Ultra II, SDHC Ultra, SDXC, SDXC Ultra, MMC-I, MMC-II, MMC plus, MMC plus Turbo, MMC 4.0, Mini SD*, Mini SDHC*, Turbo Mini SD*, MMCmobile*, RS-MMC*, RS-MMC 4.0*
- Slot 3: xD, xD type M, xD type H
- Slot 4: Micro SD, Micro SDHC, Micro SDHC Ultra, T-Flash, MMCmicro
- Slot 5: MS Micro, MS-Pro Micro, MS-HG Micro, MS XC-HG Micro, M2
- Slot 6: MS, High Speed Memory Stick (HS-MS), MS Pro, MS Pro-HG, MS-Pro Duo, MS-HG, Memory Stick XC, MS Magic Gate, MS-Pro Magic Gate, MS-Duo, MS-Duo Magic Gate, MS Pro-HG Duo, MS-Duo, MS XC-Duo, MS XC-HG Duo
*Adapter is required
System requirements
- Android 11.0 or above
- Chrome OS
- Linux Kernel 5.11 or above
- Mac OS 11.2.3 or above
- Windows 8.1/8.1-64/10/10-64/11
- PC or laptop with a free USB Type-A port
Package content
- USB 2.0 Card Reader
- USB 2.0 cable
- User manual
Transparent enclosure with stand
The sturdy, transparent plastic housing provides a view inside to quickly see which memory is inside. A stand is supplied for vertical operation.
HDD installation without tools
The special feature of this enclosure is that no tools are required to install the HDD. The lid can be pushed backwards by a little pressure, the HDD will be attached to the SATA port and then the lid is reattached until it locks.
Specification
• Connectors:
external:
1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ female
1 x DC jack
internal:
1 x SATA 6 Gb/s 22 pin receptacle
• On / Off switch
• Suitable for 3.5? SATA HDD:
SATA HDD up to 6 Gb/s
HDD up to 10 TB
• Chipset: VIA VL716
• Data transfer rate:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• LED indicator for power and access
• Transparent plastic housing
• Dimensions (LxWxH): ca. 179 x 116 x 30 mm
• Hot Swap, Plug & Play
System requirements
• Chrome OS 75.0 or above
• Linux Kernel 3.3 or above
• Mac OS 10.14.6 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-C™ port or
• PC or laptop with a free USB Type-A port
Package content
• 3.5? external enclosure
• Cable USB-C™ male to USB-C™ male, length ca. 50 cm
• Cable USB-C™ male to USB Type-A male, length ca. 1 m
• Stand
• Power supply
• User manual
Power supply specification
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1 A
• Output: 12 V / 2 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.0 mm
outside: ø ca. 5.5 mm
length: ca. 10 mm
Package
• Retail Box
The card reader by Delock can be used for reading and writing XQD memory cards. The card reader can be connected to a PC or laptop via the USB Type-C™ interface.
Specification
- Connectors:
1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ male >
1 x XQD 2.0 slot - Push to push XQD socket
- For XQD memory cards based on USB
- Data transfer rate up to:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps - Housing material: aluminium
- Dimensions without cable (LxWxH): ca. 62 x 57 x 15 mm
- Cable length without connectors: ca. 13 cm
- Colour: grey
- Plug & Play
System requirements
- Android 10.0 or above
- Chrome OS 87.0 or above
- iPad Air (4th Generation) or above
- iPad Pro (3rd Generation) or above
- Linux Kernel 5.4 or above
- Mac OS 10.15.7 or above
- Windows 8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-C™ or Thunderbolt™ 3 port
Package content
- Card reader USB Type-C™ to XQD
Package
- Retail Box
Specification
- Connector: 1 x USB Type-C™ male
- Compact nano USB Type-C™ receiver
- For right and left handers
- 3 power saving modes
- 2 standard buttons, 1 scroll wheel
- Sensitivity: 1000 dpi
- Bandwith: 2.4 GHz, operating range up to 10 m
- Operating temperature: -5 °C ~ 40 °C
- Operating humidity: 20 ~ 90 %
- Current consumption: max. 12 mA
- Plug & Play
- Battery: 1 x AA (included in the package content)
System requirements
- Windows 7/7-64/8.1/8.1-64/10/10-64, Linux ex Kernel 4.x.x, Mac ex OS 10.9, 10.12
- PC or laptop with a free USB Type-C™ port
Package content
- Mouse
- USB Type-C™ receiver
- 1 x AA battery
- Manual
Automatic adaptation to ambient brightness
The scanner automatically adapts to the ambient brightness and captures up to 30 scans per second under optimal lighting conditions.
In low ambient brightness, the barcode is illuminated by an additional white LED and can therefore also be used in poor lighting conditions.
Transmission via USB
The data transfer of the scanned barcodes is done via the included USB cable.
Fixed connection
The USB cable will be connected to the scanner via RJ50 plug. The connection is flush, so that the cable can only be removed using with the included ejection tool. Thus there is always a firm connection between the scanner and the system.
Note
This scanner is intended exclusively for the output of the German keyboard.
System requirements
- Android 9.0 or above
- iPad Pro (2018)
- Linux Kernel 5.4 or above
- Mac OS 10.15.5 or above
- Windows 8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Package content
- Barcode scanner
- USB Type-A to RJ50 cable, length ca. 1.5 m
- Ejection tool
- User manual
Specification
- Connectors:
1 x SuperSpeed USB (USB 3.1 Gen 1) USB Type-C™ male >
1 x CFast 2.0 slot - Chipset: Asmedia ASM1153E
- Data transfer rate up to:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps - Supports CFast type I / II memory cards
- Downwards compatible to CFast 1.0
- Housing material: aluminium
- Dimensions without cable (LxWxH): ca. 58.1 x 50.7 x 10.3 mm
- Cable length without connectors: ca. 8 cm
- Colour: silver
- Plug & Play
System requirements
- Linux Kernel 2.6 or above
- Mac OS 10.9 or above
- Windows 7/7-64/8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-C™ or Thunderbolt™ 3 port
Package content
- Card reader USB Type-C™ to CFast
Package
- Retail Box
Technical data
• VIA chipset VIA VL800
• 3 x USB 3.0 type A
• 1 x internal USB 3.0 type A
• 1 x internal Molex 4-pin power connector
• Data transfer rate up to 5 Gb/s
• Backwards compatible with USB 2.0 and USB 1.1.
However, the higher data transfer rate of 5 Gb/s cannot then be achieved
• PCI Express x1
• Supports PCI Express 2.0
System requirements
• Windows XP/Vista/7/7-64, Linux from 2.6
• PC with one free PCI Express slot
• Power supply unit with one free Molex power connector
Package contents
• PCI Express card USB 3.0
• Low profile trim
• CD driver
• User manual
Specification
- Connector: 1 x USB 2.0 Type-A male
- For right and left handers
- 2 standard buttons, 1 scroll wheel and 1 DPI button
- Settings: dpi-value, backlight, programmable keys, scroll wheel
- Sensitivity: 800 / 1200 / 1600 / 2400 dpi – DPI button, 3200 / 4800 dpi – Software setting
- Polling rate: 500 Hz
- Plug & Play
- Gold-plated connectors
- 1 x ferrite core
- Dimensions (LxWxH): ca. 132 x 69 x 39 mm
- Cable length: ca. 1.8 m
- Weight: ca. 148 g
- Colour: black / red
System requirements
- Windows 7/7-64/8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Package content
- Mouse
- CD ROM with software
Package
- Retail Box
Extensive connectivity
Due to the specially designed adapter, the Delock hub can be quickly and easily connected to the USB Type-A socket. Thus, it can be easily connected to new devices with USB Type-C™ female and older devices that only have a USB Type-A connector. The adapter is located directly on the cable and therefore it cannot be lost.
Small sturdy helper
Due to its small dimensions and its sturdy housing, this Delock Hub is particularly suitable for travelling. It can simply be packed into the bag together with the laptop or tablet and used as needed.
Specification
- Connectors:
1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ male >
4 x SuperSpeed USB (USB 3.2 Gen 1) Type-A female
Adapter:
1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ female >
1 x SuperSpeed USB (USB 3.2 Gen 1) Type-A male - Chipset: Genesys Logic GL3510
- Data transfer rate up to:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps - 1 x LED indicator
- Robust metal housing
- Dimensions (LxWxH): ca. 70 x 23 x 18 mm
- Cable length incl. connector: ca. 20 cm
- Colour: black
- Plug & Play
System requirements
- Chrome OS
- iPad Air (4th Generation) or above
- iPad Pro (3rd Generation) or above
- Linux Kernel 5.8 or above
- Mac OS 11.1 or above
- Windows 8.1/8.1-64/10/10-64
- Device with a free USB Type-C™ port or with a free Thunderbolt™ 3 port or
- A free USB Type-A port
Package content
- Hub USB 3.2 Gen 1
- User manual
Package
- Retail Box
Specification
• Connector:
1 x USB 3.0 Type-A male >
1 x mSATA slot (full size)
• Data transfer rate up to 5 Gb/s
• For 3.3 V mSATA module
• Dimensions (LxWxH): ca. 76 x 42 x 7 mm
• Hot Swap, Plug & Play
System requirements
• Windows 7/7-64/8/8-64/8.1/8.1-64/10/10-64, Mac OS 10.9.5, Linux Kernel 3.13
• A free USB Type-A female port
Package content
• Converter
Package
• Box
Specification
• Connectors:
external:
1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ male
1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) Type-A male
internal:
1 x 67 pin M.2 key M slot
• Chipset: JMicron JMS583
• Supports M.2 modules in format 2280, 2260 and 2242 with key M or
key B+M based on PCIe (NVMe)
• Maximum height of the components on the module: 1.5 mm,
application of double-sided assembled modules supported
• Bootable
• Supports NVM Express (NVMe)
• Data transfer rate up to 10 Gbps
• LED indicator for power and access
• Metal housing
• Dimensions (LxWxH): ca. 122 x 25 x 9 mm
• Hot Plug, Plug & Play
System requirements
• Android 9.0 or above
• Chrome OS 72.0 or above
• Linux Kernel 4.6.4 or above
• Mac OS 10.14.5 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-C™ port
Package content
• External enclosure M.2
• Mounting material
• Screwdriver
• 3 x thermal pad
• User manual
Package
• Retail Box
Technical data
• IOI article number: U3-PCIE1XG205-1S
• Connectors: external: 2 x USB 3.0 type A socket
Internal: PCI Express x1, V2.0
1 x SATA 15-pin power connector
• Chipset: Renesas uPD720202
• Data transfer rates up to:
SuperSpeed 5 Gb/s,
Hi-Speed 480 Mb/s,
Full-speed 12 Mb/s,
Low-speed 1.5 Mb/s
• Supports PCI Bus power management interface specification revision 1.2
• Compatible with xHCI specification 1.0
• Supports battery charging specification v1.2 (CDP)
• Backwards compatible with USB 2.0 and USB 1.1
• USB sockets with 3 x screw connectors (M2 x 0.4)
System requirements
• Windows Vista/Vista-64/7/7-64/8/8-64/8.1/8.1-64
• PC with one free PCI Express slot
Package contents
• PCI Express card USB 3.0
Specification
• Connectors:
1 x USB Type-C™ female
1 x USB Type-A female
• Input: DC 12 ~ 24 V
• Output:
USB Type-C™ Power Delivery (PD):
5 V / 9 V / 12 V / 15 V / 3.0 A, 20 V / 3.0 A
5 V / 9 V / 12 V / 15 V / 3.0 A, 20 V / 2.25 A (USB-C™ + USB-A)
USB Type-A:
5 V / 3.0 A, 9 V / 2.0 A, 12 V / 1.5 A
• Output power: max. 63 W total
• Overload protection
• Over current protection
• Overheating protection
• Short circuit protection
• Bicolour LED:
blue / red: USB-A / USB-C™ PD
• Material: plastic
• Colour: black
• Dimensions (LxD): ca. 70 x 40 mm
Package content
• Car charger
Package
• Retail Box
Ideal test equipment
Due to the USB-A connector and direct installation of the SSD on the printed circuit board, without housing, the Delock converter can be used as test equipment.
Specifications
- Connections:
1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) Type-A connector
1 x 67-pin M.2 key M slot
- Chipset: JMicron JMS583
- Supports M.2 modules in formats 2280, 2260 and 2242 with key M or key B+M based on PCIe (NVMe)
- Maximum height of components on the module: 1.5 mm, double-sided modules can be used
- Supports NVM Express (NVMe)
- Data transfer rate: up to 10 Gbps
- LED display for power and access
- Bootable
- Dimensions (LxWxH): approx. 110 x 22 x 6 mm
- Plug and play
System requirements
- Chrome OS 71.0 or later
- Linux Kernel 4.9.4 or higher
- Mac OS 10.14 or later
- Windows 7/7 - 64/8.1/8.1 - 64/10/10 - 64
- PC or notebook with one free USB Type-A port
Contents
- M.2 converter
- Fastening material
- Screwdriver
- User manual
Packaging
Technical data
• Connections:
External:
4 x USB 3.0 type A socket
Internal:
1 x SATA power connector
1 x PCI Express x1, V2.0
• Chipset: VLI
• Data transfer rates up to:
SuperSpeed 5 Gb/s,
Hi-Speed 480 Mb/s,
Full-speed 12 Mb/s,
Low-speed 1.5 Mb/s
System requirements
• Windows Vista/Vista-64/7/7-64/8/8-64/8.1/8.1-64, Linux Kernel 3.4
• PC with one free PCI Express slot
• Power supply unit with one free SATA power connector
Package contents
• PCI Express card USB 3.0
• CD driver
• User manual
Specification
• Connectors:
external:
4 x SuperSpeed USB (USB 3.2 Gen 1) Type-A female
internal:
1 x PCI Express x4, V2.0
1 x SATA power connector
1 x Molex 4 pin power connector
• Chipset: 4 x Renesas uPD720202
• Data transfer rate up to:
SuperSpeed 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• Bootable
System requirements
• Linux Kernel 3.3 or above
• Windows 8.1/8.1-64/10/10-64
• PC with one free PCI Express x4 / x8 / x16 / x32 slot
Package content
• PCI Express card USB 3.0
• Low profile bracket
• User manual
Package
• Box
Specification
- Connectors: 1 x USB 2.0 Type-A male > 1 x SD / MMC slot, 1 x Micro SD slot
- Chipset: Moai M8168
- Data transfer rate up to 480 Mbps
- 1 x LED indicator
- Hot Swap, Plug & Play
- Dimensions (LxWxH): ca. 60 x 22 x 11 mm
Supports following memory cards:
- Slot 1: SD, SD3.0 UHS-I, SD4.0 UHS-II, SD High Capacity (SDHC), SD High Speed, SDXC, Turbo-SD, Turbo Mini SD*, Mini SD*, MMC-I, MMC-II, MMC plus, MMC Dual Voltage, RS-MMC*, RS-MMC Dual Voltage*, RS-MMC4.0*
- Slot 2: Micro SD, Micro SD3.0 UHS-I, Micro SD4.0 UHS-II, Micro SDHC, Micro SDXC, T-Flash, MMC Mobile, MMC micro
- *Adapter is required
System requirements
- Android 10.0 or above
- Chrome OS 86.0 or above
- Linux Kernel 3.2 or above
- Mac OS 10.15.7 or above
- Windows 8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Package content
- USB 2.0 Card Reader
Package
- Retail Box
Note
Before you begin, back up the data to your memory, as it will no longer exist after formatting.
Please note that if you lose your password, you will no longer be able to access the encrypted data.
Technical Data
Connections:
- External: 1 x USB 3.0 type Micro-B socket
- Internal: 1 x 67 pin M.2 key B slot
- Chipset: Initio INIC3607
- Interface: SATA
- Supports M.2 modules in 2242 and 2230 format with key B or key B+M on SATA basis
- Maximum height of the components on the module: 1.35 mm, use of two-sided modules possible
- Data transfer rate up to 5 Gbps
- 12 Keys
- LED display
- Encryption method: AES-256
- Color: Black
- Dimensions (LxWxH): Approx. 93 x 50 x 13 mm
- Hot Plug, Plug & Play
System Requirements
- Windows 7/7-64/8.1/8.1-64/10/10-64, Linux 4.10.3 or higher
- PC or notebook with a free USB type-a port
Package Contents
- External Housing
- 1 x cable USB a plug to USB Micro-B plug, length approx. 50 cm
- 1 x screw
- Screwdriver
- Operating Instructions
Packaging
- Retail Box
This routes the internal connector to the outside so that devices with a USB type-A connector can be connected to the computer.
Technical data
• Connections:
Internal: 1x 19-pin USB 3.0 pin socket
External: 2x USB 3.0 type-A socket
• Spacing: 2.00 mm
• Thread type: #4-40 UNC
Wire gauge:
28 AWG data line
24 AWG power line
• Cable diameter: approx. 5.5 mm
• Data transfer rate: up to 5 Gbps
• Slot cover: standard
• Wire colour: black
• Cable length excluding connectors: approx. 50 cm
System requirements
• PC with one free slot
• Motherboard with a free 19-pin USB 3.0 pin connector
Package contents
• USB 3.0 slot bracket
Transparent enclosure
The sturdy, transparent plastic housing provides a view inside.
Specification
• Connectors:
1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ female
1 x SATA 6 Gb/s 22 pin receptacle
1 x DC jack
• Chipset: VIA VL716
• On / Off switch
• For 2.5? and 3.5? SATA HDD / SSD
• Suitable for all SATA HDDs up to SATA 6 Gb/s
• Data transfer rate up to 6 Gb/s
• LED indicator for power and access
• Transparent plastic housing
• Dimensions (LxWxH): ca. 142 x 75 x 58 mm
• Plug & Play
System requirements
• Chrome OS 74.0 or above
• Linux Kernel 3.3 or above
• Mac OS 10.14.5 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-C™ port or
• PC or laptop with a free USB Type-A port
Package content
• Docking station
• Cable USB-C™ male to USB-C™ male, length ca. 50 cm
• Cable USB-C™ male to USB Type-A male, length ca. 1 m
• External power supply 12 V / 2 A
• User manual
Power supply specification
• Wall power supply
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1 A
• Output: 12 V / 2 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 10 mm
Package
• Retail Box
Universal & mobile application
Due to the USB power support and the 3.5 mm stereo jack male connector, the speakers can be used universally. No external power supply is needed, as the power supply is USB powered. The speakers can therefore be used on the go with a laptop or at home with a PC, tablet or MP3 player.
Stereo sound
Despite their compact size, the speakers offer good sound quality.
Step less volume control
The speakers have a volume control on the back of the housing for individual and continuous volume adjustment.
Additional protection
The speaker membranes are protected by a fine metal grille and are protected from mechanical damage. In addition, the speakers have rubber feet on the bottom to prevent the table from being scratched.
Specification
- Connectors: 1 x 3.5 mm 3 pin stereo jack male, 1 x USB Type-A male (power supply)
- 1 x volume control button
- Audio system: 2.0
- Output / RMS: 3 W
- Impedance: 4 Ohm
- Frequency range: 80 Hz - 18 kHz
- Colour: black
- Cable lengths: between the boxes ca. 1.00 m, Stereo jack cable / USB cable ca. 1.25 m
- Dimensions (LxWxH): ca. 95 x 75 x 158 mm
- Voltage: 5 V
- USB bus powered
- Plug & Play
System requirements
- A free 3.5 mm stereo jack female port (audio)
- A free USB Type-A female port
Package content
- Speaker
Package
- Retail Box
