DELOCK 47192 - Mobile rack, PCI slot 2.5'' SATA HDD
39.91 EUR
Browse the detailed sheet with complete information, compare prices and find the features of PRODUCTNAME, proposed at the cost of PRICE CURRENCY; it classifies in the CATEGORY NAME; the sale is managed by SELLER NAME and the production is done by MANUFACTURER NAME.
This mobile rack can be installed in a free slot of your computer to upgrade your 19-inch PC or desktop PC with an additional 2.5'' SATA HDD hard drive. You can also exchange your HDD at any time during operation as the mobile rack supports a Hot Swap function.
Technical data
• For installation in a free slot (such as PCI or PCI Express)
• For 1 x 2.5'' SATA HDD
• Suitable for all 2.5'' SATA HDDs up to 6 Gb/s
• Data transfer rates of up to 6 Gb/s
• Hot Swap
• OS independent, no driver installation required
System requirements
• PC with one free slot
• A free SATA port
Package contents
• Changeable frame
• 1 x SATA data cable, 1 x SATA power cable
• Screws
• Instructions
Packaging
• Retail box
EAN: 4043619471928
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
This mobile rack can be installed in a free slot of your computer to upgrade your 19-inch PC or desktop PC with an additional 2.5'' SATA HDD hard drive. You can also exchange your HDD at any time during operation as the mobile rack supports a Hot Swap function.
Technical data
• For installation in a free slot (such as PCI or PCI Express)
• For 1 x 2.5'' SATA HDD
• Suitable for all 2.5'' SATA HDDs up to 6 Gb/s
• Data transfer rates of up to 6 Gb/s
• Hot Swap
• OS independent, no driver installation required
System requirements
• PC with one free slot
• A free SATA port
Package contents
• Changeable frame
• 1 x SATA data cable, 1 x SATA power cable
• Screws
• Instructions
Packaging
• Retail box
EAN: 4043619471928
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
DELOCK 47220 - 5.25'' mobile rack for 4 x 2.5'' SATA HDD/SSD
71.66 EUR
This mobile rack can be installed in a 5.25'' bay your desktop PC and allows up to four 2.5'' SATA hard drives of SSDs to be operated and quickly replaced.Technical data
• For installation in 5.25'' bays
• Connectors:
Front side:
4 x 2.5'' SATA HDD/SSD bays
Rear:
4 x SATA 7-pin socket
1 x 4-pin power connector
• Suitable for all 2.5 SATA HDDs/SSDs up to 6 Gb/s
• Supports various hard disk sizes: 9 mm or 12.5 mm
• Data transfer rates of up to 6 Gb/s
• Rack with key-operated switch for each bay
• 4 x LED displays for power and access
• Hot Swap
• OS independent, no driver installation required
System requirements
• PC with a 5.25'' bay
• PC with four free SATA ports
• Power supply unit with one free 4-pin power supply cable
• 4 SATA data cables
Package contents
• Changeable frame
• 2 x key
• Screws
• User manual
Packaging
• Retail box
DELOCK 47133 - Mobile rack intray for 1 x 2.5'' SATA / SAS HDD / SSD for mobile
21.83 EUR
This mobile rack inner tray by Delock allows the installation of a 2.5'' SATA / SAS HDD or SSD and is compatible with mobile rack 47220 and 47230.Technical details
- Suitable for 2.5'' SATA / SAS HDD / SSD:
HDD height up to 12.5 mm - With key lock
System requirements
- Mobile rack 47220 or 47230 by Delock
Package content
- Mobile rack intray
- 2 x keys
- Screws
Package
- Box
DELOCK 47230 - Delock mobile rack 5.25'' für 1x SLIM drive 2x 2.5'' SATA HDD/SSD
61.21 EUR
This mobile rack by Delock can be installed into a free 5.25'' bay of a PC. A slim drive and two 2.5'' SATA hard disks can be mounted to the frame. The hot swap function allows the exchange of the hard disk drive during operation.Specification
Fits into a 5.25'' bay
Connectors:
inside:
1 x Slim SATA 13 pin female
2 x SATA 6 Gb/s 22 pin receptacle
backside:
3 x SATA 7 pin plug
1 x Molex 4 pin power plug
Suitable for 2.5'' SATA HDD / SSD:
HDD height up to 12.5 mm
SATA HDD / SSD up to 6 Gb/s
supports 5 V HDD / SSD
Data transfer rate up to 6 Gb/s
Mobile rack with key lock for the 2.5'' bays
2 x LED indicator for power and access
1 x fan 40 x 40 mm x 10 mm on the backside
Dimensions (LxWxH): ca. 149.7 x 146.2 x 42.2 mm
Hot Swap
OS independent, no driver installation necessary
System requirements
- PC with one free 5.25'' bay
- PC with 3 free SATA ports
- Power supply with one free 4 pin power connector
- 3 SATA data cable
Package content
- Mobile Rack
- 2 x keys
- 12 x screws
- User manual
Package
Retail Box
DELOCK 47209 - 5.25 mobile rack for 2.5 ''/3.5'' HDD
77.08 EUR
This mobile rack can be installed in a free 5.25'' bay of your desktop PC. You can insert a 2.5 SATA hard drive and a 3.5 SATA hard drive into the rack and replace them at any time. The mobile rack also provides two USB 3.0 ports to connect additional USB devices.Special properties
• Anti-vibration on mobile rack protects the HDD against shocks
• Mechanical spring stabilises the HDD
• Control board for automatic power-off of respective HDD when flap is opened
Technical data
• For installation in 5.25 bays
• Suitable for all 2.5 SATA HDDs and 3.5 HDDs up to 6 Gb/s
• Data transfer rates of up to 6 Gb/s
• Mobile rack with key-operated switch
• 2 x status LEDs
• Hot Swap
• OS independent, no driver installation required
Connectors:
Front side:
1 x 2.5 SATA HDD bay
1 x 3.5 SATA HDD bay
2 × USB 3.0 type A ports
1 x on/off switch
Rear:
2 x SATA 22-pin
1 x 19-pin USB 3.0 pin header
System requirements
• PC with a 5.25 bay
• PC with two free SATA ports
• Power supply unit with a free SATA or Molex power connector
Package contents
• Changeable frame
• 2 x SATA data cable
• 1 x SATA power cable
• 1 x key
• Screws
• User manual
DELOCK 47189 - Delock 3.5'' mobile rack for 2x 2.5'' SATA
67.21 EUR
Delock 3.5'' mobile rack for 2x 2.5'' SATA HDDThis metal mobile rack can be installed in a free 3.5'' bay of your desktop PC.
Two 2.5'' SATA hard drives can be slotted into the rack.
The Hot Swap function enables both SATA hard drives to be switched during operation.
Technical data
• For installation in 3.5'' bays
• For 2x 2.5'' SATA HDD
• For SATA I or SATA II HDD
• Data transfer rate up to 3 GB/s
• Hot Swap
• Optional HDD fan (mounting holes on the bottom of the rack)
System requirements
• OS independent, no driver installation required
• PC with a 3.5'' bay and two free SATA ports
Package contents
• Changeable frame
• 2x SATA data cables, 2x SATA power cables
• Screws
• User manual
DELOCK 90396 - 4-port SATA 1 slot M.2 key B PCI Express x4
89.23 EUR
This PCI Express card from Delock expands a PC with four internal SATA ports and an M.2 slot. This card can be used for various devices such as SSDs, hard disks, DVD drives etc. and an M.2 module in 2242 or 2230 format.Specifications
- Internal ports:
- 4 x SATA 6 Gb/s 7-pin plug
- 1 x 67-pin M.2 key B slot
- 1 x PCI Express x4, V3.0
- Chipset: JMicron JMB585
- 5x LED indicators
- Interface: SATA
- Supports M.2 modules in formats 2242 and 2230 with key B or B+M key based on SATA
- Maximum height of components on the module: 1.5 mm,
- double-sided modules can be used
- Supports Native Command Queuing (NCQ)
- Supports S.M.A.R.T.
- Supports TRIM
- Supports DevSleep
- Hot Swap
- Bootable
System requirements
- Linux Kernel 3.3 or higher
- Windows 7/7 - 64/8.1/8.1 - 64/10/10 - 64
- PC with one free PCI Express x4/x8/x16/x32 slot
Contents
- PCI Express card
- Low profile trim
- 4x SATA cable, length: approx. 50 cm
- M.2 mounting materials
- User manual
DELOCK 42624 - External 2x 3.5'' SATA HDD Enclosure, USB 3.0, stand
61.73 EUR
This plastic enclosure by Delock is used for the installation of two 3.5? SATA hard drive. The included USB Type-C™ to USB Type-A cable allows the connection to a free USB Type-A female port.Transparent enclosure with stand
The sturdy, transparent plastic housing provides a view inside to quickly see which memory is inside. A stand is supplied for vertical operation.
HDD installation without tools
The special feature of this enclosure is that no tools are required to install the HDD. The lid can be pushed backwards by a little pressure, the HDD will be attached to the SATA port and then the lid is reattached until it locks.
Specification
• Connectors:
external:
1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ female
1 x DC jack
internal:
2 x SATA 6 Gb/s 22 pin receptacle
• On / Off switch
• Suitable for 3.5? SATA HDD:
SATA HDD up to 6 Gb/s
HDD up to 10 TB
• Chipset: JMicron JMS561U
• Data transfer rate:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• LED indicator for power and access
• Transparent plastic housing
• Dimensions (LxWxH): ca. 174 x 113 x 60 mm
• Hot Swap, Plug & Play
System requirements
• Chrome OS 74.0 or above
• Linux Kernel 3.4 or above
• Mac OS 10.14.5 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-A port
Package content
• 3.5? external enclosure
• Cable USB-C™ male to USB Type-A male, length ca. 1 m
• Stand
• Power supply
• User manual
Power supply specification
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.2 A
• Output: 12 V / 3 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.0 mm
outside: ø ca. 5.5 mm
length: ca. 10 mm
Package
• Retail Box
DELOCK 64089 - Dockingstation 2.5''/ 3.5'' SATA HDD, USB 3.1
52.11 EUR
This Docking Station by Delock enables an external connection of one 2.5? or 3.5? SATA HDD or SSD through the USB-C™ interface. This solution does not require an external enclosure since the drive can just plug in directly into the docking station. The included USB cables allow the connection to a free USB Type-A or USB-C™ port.Transparent enclosure
The sturdy, transparent plastic housing provides a view inside.
Specification
• Connectors:
1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ female
1 x SATA 6 Gb/s 22 pin receptacle
1 x DC jack
• Chipset: VIA VL716
• On / Off switch
• For 2.5? and 3.5? SATA HDD / SSD
• Suitable for all SATA HDDs up to SATA 6 Gb/s
• Data transfer rate up to 6 Gb/s
• LED indicator for power and access
• Transparent plastic housing
• Dimensions (LxWxH): ca. 142 x 75 x 58 mm
• Plug & Play
System requirements
• Chrome OS 74.0 or above
• Linux Kernel 3.3 or above
• Mac OS 10.14.5 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-C™ port or
• PC or laptop with a free USB Type-A port
Package content
• Docking station
• Cable USB-C™ male to USB-C™ male, length ca. 50 cm
• Cable USB-C™ male to USB Type-A male, length ca. 1 m
• External power supply 12 V / 2 A
• User manual
Power supply specification
• Wall power supply
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1 A
• Output: 12 V / 2 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 10 mm
Package
• Retail Box
DELOCK 64098 - Docking and copy station 5x 2.5-inch SATA HDD/SSD, USB 3.0
123.6 EUR
This HDD/SSD docking station from Delock is used for the external connection of up to five 2.5-inch SATA HDDs/SSDs via the USB interface. It also facilitates the simple replacement of the drives by hot swap. This solution does not require an external housing, as the HDD/SSD is inserted directly into the docking station.Specifications
- Connections:
- 5 x SATA 6 Gb/s 22 -pin socket
- 1x USB 3.0 type-B socket
- 1x DC power socket
- Chipset: JMicron JMS578, JMB391
- Function keys:
- 1x clone button
- 1x mute button
- 1x on/off switch
- 1x mode switch
- Suitable for 2.5-inch SATA HDD/SSD
- Suitable for all SATA HDDs/SSDs up to SATA 6 Gb/s
- Data transfer rates up to:
- SuperSpeed 5 Gbps,
- Hi-Speed 480 Mbps,
- Full-speed 12 Mbps,
- Low-speed 1.5 Mbps
- 6 x LED indicator
- LED display for power, access and copy status
- Bootable
- Dimensions (LxWxH): approx. 169 x 125 x 37 mm
- Hot swap, plug & play
System requirements
- Linux Kernel 3.3 or higher
- Mac OS 10.14.6 or higher
- Windows 7/7 - 64/8.1/8.1 - 64/10/10 - 64
- PC or notebook with one free USB Type-A port
DELOCK 42011 - External 2.5'' SATA HDD/SSD enclosure, USB 3.0
25.4 EUR
This plastic enclosure by Delock can be used for the installation of a 2.5'' SATA hard drive or SSD. Despite the slim design, hard disks up to a height of 9.5 mm can be installed. The included USB Type Micro-B to USB Type-A cable allows the connection to a free USB Type-A female port.HDD / SSD installation without tools
The special feature of this enclosure is that no tools are required to install the HDD. The lid can be pushed backwards by a little pressure, the HDD will be attached to the SATA port and then the lid is reattached until it locks.
Specification
- Connectors:
external: 1 x SuperSpeed USB (USB 3.2 Gen 1) Type Micro-B female
internal: 1 x SATA 6 Gb/s 22 pin receptacle - Chipset: Asmedia ASM225CM
- Suitable for 2.5'' SATA HDD / SSD:
HDD height up to 9.5 mm
SATA HDD / SSD up to 6 Gb/s
HDD / SSD up to 4 TB
supports 5 V HDD / SSD - Data transfer rate up to 5 Gb/s
- LED indicator for power and access
- Supports S.M.A.R.T.
- Supports TRIM
- Hot Plug, Plug & Play
- Dimensions (LxWxH): ca. 128 x 79 x 15 mm
System requirements
- Chrome OS 90.0 or above
- Linux Kernel 5.8 or above
- Mac OS 11.4 or above
- Windows 8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Package content
- 2.5'' external enclosure
- Cable USB 3.0 Type-A to Type Micro-B, length ca. 50 cm
- User manual
Package
- Retail Box
DELOCK 47194 - Delock mobile rack, 8.89 cm, for 1x 6.35 cm SATA
47.06 EUR
Delock 8.89 cm (3.5'') mobile rack for 1x 6.35-cm (2.5'') SATA HDDThis metal mobile rack can be installed in your desktop PC in a free 8.89-cm bay.
One 6.35-cm SATA hard drive can be slotted directly into the rack.
The drive can also be changed during operation as this product supports a Hot Swap feature.
Technical data
• For installation in 8.89-cm (3.5'') bay
• For 1x 2.5'' SATA HDD
• For SATA I or SATA II HDD
• Data transfer rate up to 3 GB/s
• Hot Swap
• Optional HDD fan (mounting holes on the bottom of the rack)
• OS independent, no driver installation required
System requirements
• PC with a 8.89 cm (3.5'') bay and a free SATA port
Package contents
• Changeable frame
• SATA data cable, SATA power cable
• Screws
• Instructions
--Hard drive not included--!
ICYBOX ICY IB-2240SSK - Mobile rack 5.25 for 4x 2.5 SAS/SATA
92.59 EUR
- 4x 2.5'' SAS or SATA hard drives in one 5.25'' installation slot
- 2x host connectors (dual channel) for each hard drive
- Suitable for hard drive heights of 9.5 - 15 mm
- SATA host port: 6.0 Gbit/s
For professional server applications
Hard drives in a 2.5'' format are becoming increasingly popular. Your storage capacity is on the up. They are ideal for use in servers. That's why ICY BOX now offers a backplane that can be installed in a 5.25'' unit and holds four 2.5'' SAS or SATA hard drives.
The hard drive can reach heights of up to 15 mm for the highest storage capacity. Two host connectors each allow operation of SAS hard drives in dual channel mode. This ICY BOX is extremely stable even with a very high data throughput. We therefore recommend them in particular for challenging applications in RAID systems.
Controlling the temperature is designed to be correspondingly complex. The aluminium housing cools and the two 40-mm fans work reliably and quietly. Everything is just as solid and secure as the tried-and-tested ICY BOX backplanes for big systems.
CHIEFTEC CFT CBP-3141SAS - Mobile rack 3x 5.25 for 4x 3.5/2.5 SAS/SATA
135.33 EUR
- Professional data backup
- Hot Swap
- Plug and Play compatible
- Interlocking with key possible
- Space-saving
With its patented anti-vibration design, the new backplane sets cutting-edge standards. It is suitable for a wide range of applications, unlike other backplanes. The body, made of high-quality aluminium, requires only three 5.25'' slots and offers space for four 3.5'' or 2.5'' hard disks or SSDs. SATA I/II/III and SAS I/II are supported.
Interface (HDD/SSD): SATA I, SATA II, SATA III, SAS I/II
Dimensions (D x W x H): 202mm x 146mm x 126mm
Weight: 1.79 kg
Form factor: 3x 5.25'' slots for 4 HDDs/SSDs (3.5''/2.5'')
Fan: 80 mm fan (slide bearing)
Power supply: 1x SATA
Data ports (external): 4 x SATA
Supported RAID levels: No RAID controller in the device
Features:
- Fan failure LED
- Reset switch for buzzer alarm
- Overheating LED
- Data transfer with up to 6 Gbps (SATA III/SAS)
Included: backplane, 4x SATA cables (60 cm), set of screws, quick start guide (English)
RAIDON RAN IT4300-U6 - Mobile rack 5.25 for 4x 2.5 SAS/SATA, 12 Gbit/s
187.63 EUR
- JBOD module for 4x 2.5'' SAS/SATA HDD/SSD in 5.25'' slot
- 4x SATA III on MiniSAS internal host interface up to 12 Gbit/s
- Hard drive height up to 15 mm
- MiniSAS port to the host computer
- LED for operation and hard drive activity
- Lockable
- High-quality metal housing and hard drive carrier
- Compatible with Windows
Compact and versatile
iT4300-U6 is an internal storage solution with four 2.5'' slots in a 5.25'' bay. The JBOD feature allows both the operating system and data to be stored on separate drives. Disc partitioning can help improve the overall system performance.
Fast, simple, SAS
A single MiniSAS connection achieves a transfer rate of up to 12 Gbit/s. The drives reach their full bandwidth when the IT-4300-U6 is combined with a RAID card and placed in RAID 0 mode. Get ready for higher transfer rates and improved productivity!
STARTECH.COM ST DRW150SATBK - 5.25'' Hot Swap SATA HDD Mobile Rack Drawer
66.7 EUR
- fits a single SATA drive into a front accessible 5.25'''' bay
- heavy duty aluminum construction for the drive caddy and bay
- key lockable drive caddy
- rubber shock absorbers
- 25,000+ insertion rating
Turns any 3.5in SATA hard drive into a rugged, hot-swap storage solution for a 5.25in bay
This high quality Removable SATA Hard Drive Drawer/Mobile Rack delivers a professional-grade hot-swap solution, allowing you to quickly swap SATA hard drives in/out of a computer without having to open the computer case. The mobile rack is fully compatible with RAID installations to ensure maximum performance and versatility for enhanced storage applications.
To maximize performance and utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.
This product is interchangeable as a replacement for StorCase SATA models S21J111, SC21J111 and RJR110.
DELOCK 90498 - 5 port SATA PCI Express x4 Card - Low Profile Form Factor
70.93 EUR
The PCI Express card by Delock expands a PC by five internal SATA ports. Different devices such as SSDs, hard drives, DVD-drives etc. can be connected to the card.Specification
• Connectors:
internal:
5 x SATA 6 Gb/s 7 pin plug
1 x PCI Express x4, V3.0
• Chipset: JMicron JMB585
• 5 x LED indicator
• Supports Native Command Queuing (NCQ)
• Supports S.M.A.R.T.
• Supports TRIM
• Supports DevSleep
• Hot Swap
• Bootable
System requirements
• Linux Kernel 3.3 or above
• Windows 8.1/8.1-64/10/10-64
• PC with one free PCI Express x4 / x8 / x16 / x32 slot
Package content
• PCI Express card
• Low profile bracket
• 5 x SATA cable, length ca. 35 cm
• User manual
Package
• Retail Box
DELOCK 90395 - 5-port SATA PCI Express x4 card
82.2 EUR
This PCI Express card from Delock expands the PC by five internal SATA ports. Different devices, such as SSDs, hard drives, DVD drives etc., can be connected to this card.Specifications
- Internal ports:
- 5x SATA 6 Gb/s 7-pin sockets
- 1 x PCI Express x4, V3.0
- Chipset: JMicron JMB585
- 5x LED display
- Supports Native Command Queuing (NCQ)
- Supports S.M.A.R.T.
- Supports TRIM
- Supports DevSleep
- Hot Swap
- Bootable
System requirements
- Linux Kernel 3.3 or higher
- Windows 7/7 - 64/8.1/8.1 - 64/10/10 - 64
- PC with one free PCI Express x4/x8/x16/x32 slot
Package contents
- Retail box
- PCI Express card
- Low profile trim
- 5x SATA cable, length approx. 50 cm
- User manual
DELOCK 89473 - PCI Express Card > 2 x M.2 to SATA
39.2 EUR
This PCI Express card by Delock expands the PC by two M.2 slots. It can be connect two M.2 SATA modules in format 22110, 2280, 2260, 2242, 2230 in the card and connect via SATA cables to the mainboard.Specification
• Connector:
internal:
2 x 67 pin M.2 key B slot
1 x PCI Express x1
2 x SATA 6 Gb/s 7 pin female
• Interface: SATA
• Supports M.2 modules in format 22110, 2280, 2260, 2242 and 2230 with key B
or key B+M based on SATA
• Maximum height of the components on the module: 1.5 mm
application of double-sided assembled modules supported
• Data transfer rate up to 6 Gb/s
System requirements
• Windows 7/7-64/8/8-64/8.1/8.1-64/10/10-64, Linux Kernel 3.19
• PC with one free PCI Express slot
• One free SATA 7 pin interface for each connected M.2 module based on SATA
Package content
• PCI Express card
• Low profile bracket
• 2 x fixing screw
• 2 x SATA cable, length ca. 50 cm
• User manual
Package
• Box
DELOCK 90406 - 2-port SATA PCI Express card with RAID 1
80.96 EUR
This Delock PCI Express card expands the PC by two internal SATA ports. Different devices, such as SSDs, hard drives, DVD drives etc., can be connected to this card.RAID 1
The special feature of this PCIe card is that an SSD/HDD, which already contains data, does not need to be formatted to be placed in a RAID 1 array with a second SSD/HDD. The data of the existing SSD/HDD is mirrored to the new one.
Technical data
- 2 x SATA 6 GB/s 7-pin connector, 1 x PCI Express x1, V2.0, 4 x 2-pin male connector for LED
- Chip set: Asmedia ASM1062R
- Supports RAID 1
- Jumper for RAID mode ON/OFF
- Supports Native Command Queuing (NCQ)
- Supports SMART
- Supports TRIM
- Supports DevSleep
- Hot Plug
System requirements
- Linux Kernel 3.3 or higher
- Windows 7/7 - 64/8.1/8.1 - 64/10/10 - 64
- PC with one free PCI Express slot
Contents
- PCI Express card
- Low profile trim
- CD driver
- User manual
Packaging
- Retail box
DELOCK 89359 - PCI Express > 2 x USB 3.0, 2 x SATA 6 Gb/s
49.85 EUR
The DeLock PCI Express card adds two external USB 3.0 ports and two internal SATA port to your PC. Various USB devices such as docking stations, card readers, hard drives, DVD drives etc. can be connected to the card. Technical data
• Chipset: Asmedia (SATA), Etron (USB 3.0)
• Connections:
External: 2 x USB 3.0 type A socket
Internal: 2 x SATA 6 Gb/s 7-pin socket
1 x 4-pin power connector
1 x PCI Express x4, V2.0
• Data transfer rates:
USB 3.0 up to 5 Gb/s
SATA up to 6 Gb/s
• Supports battery charging 1.2 and Apple fast charging
System requirements
• Windows XP/Vista/7/7-64/8, Linux 3.2.0
• PC with one free PCI Express 2.0 x4/x8/x16/x32 slot
• Power supply unit with one free 4-pin power connector
Package contents
• PCI Express card
• CD driver
• User manual
DELOCK 89536 - PCI Express Card > 2 x M.2 Raid to SATA
81.99 EUR
This PCI Express card by Delock expands the PC by two M.2 slots. It can be connected up to two M.2 SATA modules in format 22110, 2280, 2260, 2242, 2230 to the card. When using more than one SSD, there is the possibility to use different RAID level.Specification
• Connector:
internal:
2 x 67 pin M.2 key B slot
1 x PCI Express x4
• Interface: SATA
• Supports M.2 modules in format 22110, 2280, 2260, 2242 and 2230 with key B or key B+M
based on SATA
• Maximum height of the components on the module: 1.5 mm application of double-sided
assembled modules supported
• Data transfer rate up to 6 Gb/s
• Supports RAID 0, 1, SPAN
• 4 x LED indicator
• Bootable
System requirements
• Windows 7/7-64/8.1/8.1-64/10/10-64, Linux Kernel 3.3
• PC with one free PCI Express x4 / x8 / x16 / x32 slot
Package content
• PCI Express card
• Low profile bracket
• 2 x fixing screw
• User manual
Package
• Box
DELOCK 42612 - External 3.5'' SATA HDD Enclosure, USB 3.0
38.57 EUR
This plastic enclosure by Delock can be used for the installation of a 3.5? SATA hard drive.Fast data transfer due to SuperSpeed USB
Due to the JMicron chipset, this hard disk enclosure supports SuperSpeed USB with up to 5 Gbps transfer speed. This allows data to be transferred quickly to and from the hard disk.
Specification
• Connectors:
external:
1 x SuperSpeed USB (USB 3.1 Gen 1) Type-A female
1 x DC jack
internal:
1 x SATA 6 Gb/s 22 pin receptacle
• Suitable for all 3.5? SATA HDDs up to 6 Gb/s
• Chipset: JMicron JMS578
• Data transfer rate:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• Supports UASP
• On / Off switch
• LED indicator for power and access
• Plastic housing
• Colour: black
• Dimensions (LxWxH): ca. 186 x 116 x 35 mm
• Hot Swap, Plug & Play
System requirements
• Linux Kernel 3.3 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-A port
Package content
• 3.5? external enclosure
• Cable USB Type-A male to Type-A male, length ca. 60 cm
• Power supply
• User manual
Power supply specification
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.8 A
• Output: 12 V / 2 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 11 mm
Package
• Retail Box
DELOCK 42623 - External 3.5'' SATA HDD Enclosure, USB 3.0, stand
43.34 EUR
This plastic enclosure by Delock can be used for the installation of a 3.5? SATA hard drive. The included USB cables allow the connection to a free USB Type-A or USB-C™ port.Transparent enclosure with stand
The sturdy, transparent plastic housing provides a view inside to quickly see which memory is inside. A stand is supplied for vertical operation.
HDD installation without tools
The special feature of this enclosure is that no tools are required to install the HDD. The lid can be pushed backwards by a little pressure, the HDD will be attached to the SATA port and then the lid is reattached until it locks.
Specification
• Connectors:
external:
1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ female
1 x DC jack
internal:
1 x SATA 6 Gb/s 22 pin receptacle
• On / Off switch
• Suitable for 3.5? SATA HDD:
SATA HDD up to 6 Gb/s
HDD up to 10 TB
• Chipset: VIA VL716
• Data transfer rate:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• LED indicator for power and access
• Transparent plastic housing
• Dimensions (LxWxH): ca. 179 x 116 x 30 mm
• Hot Swap, Plug & Play
System requirements
• Chrome OS 75.0 or above
• Linux Kernel 3.3 or above
• Mac OS 10.14.6 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-C™ port or
• PC or laptop with a free USB Type-A port
Package content
• 3.5? external enclosure
• Cable USB-C™ male to USB-C™ male, length ca. 50 cm
• Cable USB-C™ male to USB Type-A male, length ca. 1 m
• Stand
• Power supply
• User manual
Power supply specification
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1 A
• Output: 12 V / 2 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.0 mm
outside: ø ca. 5.5 mm
length: ca. 10 mm
Package
• Retail Box
DELOCK 62584 - M.2 NGFF key M plug > PCI Express x4 slot
24.21 EUR
One PCI Express card can be connected to this Delock adapter . The adapter is connected to your system via the M.2 NGFF interface. The adapter can be shortened from 80 mm to 60 mm at the predetermined breaking point.Technical data
Connectors:
- 1 x 59-pin M.2 NGFF key M plug (PCI Express)
- 1 x PCI Express x4 slot, Rev. 2.0
- 1 x 4-pin power connector
- Format: 2280 or 2260
- OS-independent, no driver installation required
System requirements
- One free M.2 NGFF interface with key M
Package contents
- M.2 NGFF > PCI Express adapter
- Fixing screw for M.2 NGFF adapter
- Power cable
Packaging
- Retail box
DELOCK 42605 - External Enclosure 5.25 Slot-in Slim SATA Drives 9.5/12.7 mm, US
46.23 EUR
This enclosure by Delock is an external solution for different Slot-in Slim SATA drives with 9.5 or 12.7 mm height, e.g. DVD-ROM, DVD±RW, Blu-ray etc. Thus the built-in drive will be converted into a mobile drive. The enclosure is connected to the computer or laptop via the USB Type-C™ plug.Specification
- Connectors:
external:
1 x SuperSpeed USB (USB 3.1 Gen 1) USB Type-C™ male
internal:
1 x Slim SATA 13 pin receptacle - Chipset: Initio INIC-3619
- For Slim SATA drives up to 12.7 mm height
- Supports DVD±RW, DVD-ROM, CD-RW, CD-ROM, Blu-ray
- Hot Swap, Plug & Play
- No external power supply needed
- Housing material: plastic
- Colour: silver / black
- Cable length: ca. 28 cm
- Dimensions (LxWxH): ca. 143 x 139 x 16 mm
System requirements
- Linux Kernel 2.6.38 or above
- Mac OS 10.9.5 or above
- Windows 7/7-64/8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-C™ port
Package content
- External enclosure
- User manual
- Package
- Retail Box
DELOCK 64099 - SATA 22 pin male to M.2 Key B slot Adapter
24.93 EUR
This adapter by Delock enables the connection of an M.2 SSD in 2280, 2260, 2242 and 2230 format. The adapter will be installed into the system internally through a SATA 22 pin interface.Perfect accessory
This item is suitable as an accessory for the Delock docking and clone station 64098. Thus, M.2 SATA SSDs can be used and cloned.
• Connectors:
1 x SATA 22 pin plug
1 x 67 pin M.2 key B slot
• Interface: SATA
• Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key B or key B+M
based on SATA
• Maximum height of the components on the module: 1.5 mm, application of double-
sided assembled modules supported
• Supports Native Command Queuing (NCQ)
• Supports S.M.A.R.T.
• Supports TRIM
• Supports DevSleep
• Hot Swap
• Bootable
• 1 x LED indicator
• Data transfer rate up to 6 Gb/s
• Dimensions (LxWxH): ca. 97 x 45 x 4 mm
System requirements
• A free SATA 22 pin interface
Package content
• Adapter
• Mounting material
• Screwdriver
Package
• Retail Box
ICYBOX ICY IB-565SSK - Mobile rack 3x 5.25 for 5x 3.5 SAS/SATA
168.04 EUR
- 5x 3.5'' SATA or SAS HDD in 3x 5.25'' installation slots
- Supports SATA I, II and III and SAS HDD up to 6 Gbit/s
- Robust industrial design in aluminium
- Lockable hard drive carrier
- LED for power and HDD access
- LED and audio alarm for fan errors and overheating
- Non-scratch SATA (NSS) connector
- 80x80-mm fan
- Adjustable alarm temperature (55°C, 60°C, 65°C)
- Plug & Play and Hot Swap
- Supports Windows and Mac
For the most demanding of server applications
These three hard drive backplanes have proven themselves in challenging server applications. They can be operated with both SATA and SAS hard drives. They are extremely stable even with a very high data throughput, which is why we recommend them in particular for challenging applications in RAID systems. Controlling the temperature is designed to be correspondingly complex. The aluminium parts dissipate the heat and the 80-mm fan is reliable and quiet. If the temperature inside the housing becomes too high, acoustic and optical signals are issued as a warning. All mechanical parts are designed to withstand high levels of stress. The aluminium parts are electrolytically sealed.
ICYBOX ICY IB-564SSK - Mobile rack 3x 5.25 for 4x 3.5 SAS/SATA
133.88 EUR
- 4x 3.5'' SATA or SAS HDD in 3x 5.25'' installation slots
- Supports SATA I, II and III and SAS HDD up to 6 Gbit/s
- Robust industrial design in aluminium
- Lockable hard drive carrier
- LED for power and HDD access
- LED and audio alarm for fan errors and overheating
- Non-scratch SATA (NSS) connector
- 80x80-mm fan
- Adjustable alarm temperature (55°C, 60°C, 65°C)
- Plug & Play and Hot Swap
- Supports Windows and Mac
For the most demanding of server applications
These three hard drive backplanes have proven themselves in challenging server applications. They can be operated with both SATA and SAS hard drives. They are extremely stable even with a very high data throughput, which is why we recommend them in particular for challenging applications in RAID systems. Controlling the temperature is designed to be correspondingly complex. The aluminium parts dissipate the heat and the 80-mm fan is reliable and quiet. If the temperature inside the housing becomes too high, acoustic and optical signals are issued as a warning. All mechanical parts are designed for the highest loads.
DELOCK 90349 - PCIe x1 card with 2x SATA HDD/SSD
61.58 EUR
This PCI Express card from Delock expands the PC by two SATA 22-pin ports. Up to two 2.5'' SSDs/HDDs can be connected to the card. The SSDs/HDDs are mounted on both sides of the PCIe card.Internal connections: 1x PCI Express x1, V2.0, 2x SATA 22-pin socket
- Chipset: Asmedia ASM1061
- Suitable for 2.5'' SATA HDD/SSD, SATA HDD/SSD up to 6 Gb/s, supports 5 V HDD/SSD
- Bootable
- Supports Native Command Queuing (NCQ)
- Dimensions: (LxWxH): approx. 150 x 120 x 20 mm
System requirements
- Linux Kernel 4.9.4 or higher
- Windows 7/7 - 64/8.1/8.1 - 64/10/10 - 64
- PC with one free PCI Express slot
Contents
- PCI Express card
- 8x fixing screw
- 2x HDD/SSD mounting bracket
- CD driver
- User manual
Packaging
- Retail box
Note
When using both SATA ports, the adjacent PCI slot is also occupied.
DELOCK 90348 - PCIe x1 card with 2x SATA HDD/SSD
51.24 EUR
This PCI Express card from Delock expands the PC by two SATA 22-pin ports. Up to two 2.5'' SSDs/HDDs can be connected to the card. The SSDs/HDDs are mounted in a row on one side of the PCIe card.Specifications
- Internal connections: 1x PCI Express x1, V2.0, 2x SATA 22-pin socket
- Chipset: Asmedia ASM1061
- Suitable for 2.5-in SATA HDD/SSD, SATA HDD/SSD up to 6 Gb/s, supports 5 V HDD/SSD
- Bootable
- Supports Native Command Queuing (NCQ)
- Dimensions: (LxWxH): approx. 227 x 120 x 20 mm
System requirements
- Linux Kernel 4.9.4 or higher
- Windows 7/7 - 64/8.1/8.1 - 64/10/10 - 64
- PC with one free PCI Express slot
Contents
- PCI Express card
- 8x fixing screw
- CD driver
- User manual
Packaging
- Retail box
DELOCK 90063 - Riser Card PCI Express x1 to 1 x PCI 32 Bit 5 V Slot
44.36 EUR
The PCI Express riser card by Delock enables the connection of one PCI card via one PCI Express interface. The recess in the slot bracket allows an external connection of e.g. cables to the built-in PCI card in the computer case.Specification
- Connectors:
1 x PCI Express x1 >
1 x 32-Bit PCI
1 x power connector 4 pin Molex male - Chipset: Broadcom PEX8112-AA66BI
- Bootable
System requirements
- Linux Kernel 5.4 or above
- Windows 8.1/8.1-64/10/10-64
- Windows Server 2019
- PC with one free PCI Express slot
Package content
- PCIe riser card
- User manual
Package
- Box
DELOCK 90062 - Riser Card PCI Express x1 to 1 x PCI 32 Bit 5 V Slot
27.61 EUR
The PCI Express riser card by Delock enables the connection of one PCI card via one PCI Express interface. The recess in the slot bracket allows an external connection of e.g. cables to the built-in PCI card in the computer case.Specification
- Connectors:
1 x PCI Express x1 >
1 x 32-Bit PCI
1 x power connector 4 pin Molex male - Chipset: Asmedia ASM1083
- Bootable
System requirements
- Linux Kernel 5.4 or above
- Windows 8.1/8.1-64/10/10-64
- Windows Server 2019
- PC with one free PCI Express slot
Package content
- PCIe riser card
- User manual
Package
- Box
DELOCK 81507 - Riser Card PCI Express 3.0 x4 male to U.2 SFF-8639 SSD slot with
73.98 EUR
This PCI Express riser card by Delock is used to connect a SSD with U.2 interface. The flexible cable allows a space-saving installation inside the computer case.Technical details
- Connectors:
1 x PCI Express x4 male
1 x U.2 SFF-8639 female - Supports PCI Express 3.0 protocol
- Cable gauge: 28 AWG
- Colour: black
- OS independent, no driver installation necessary
- Cable length: ca. 30 cm
System requirements
- PC with one free PCI Express x4 / x8 / x16 / x32 slot
- A free U.2 SFF-8639 interface
Package content
- PCIe riser card
Package
- Box
DELOCK 90480 - PCI Express x4 Card to 2 x SFP slot Gigabit LAN
146.39 EUR
This PCI Express network card by Delock provides a connection for two SFP modules with a transfer rate of 1 Gbps. The SFP slots accept optional Gigabit SFP modules by Delock to connect a PC via a fiber optic cable to the network.Specification
• Connectors:
external: 2 x SFP slot for 1 Gbps SFP module
internal: 1 x PCI Express x4, V2.1
• Chipset: Intel 82576
• Data transfer rate:
Gigabit Ethernet up to 1 Gbps
PCI Express x4 up to 16 Gbps
• Supports 9k Jumbo Frames
• Supports PXE
System requirements
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC with one free PCI Express slot
• SFP module
Package content
• PCI Express card
• Low profile bracket
• Driver CD
• User manual
Package
• White Box
DELOCK 81506 - Riser Card PCI Express 3.0 x4 male to U.2 SFF-8639 SSD slot 90°
71.92 EUR
This PCI Express riser card by Delock is used to connect a SSD with U.2 interface. The flexible cable allows a space-saving installation inside the computer case.Technical details
- Connectors:
1 x PCI Express x4 male
1 x U.2 SFF-8639 female - Supports PCI Express 3.0 protocol
- Cable gauge: 28 AWG
- Colour: black
- OS independent, no driver installation necessary
- Cable length: ca. 30 cm
System requirements
- PC with one free PCI Express x4 / x8 / x16 / x32 slot
- A free U.2 SFF-8639 interface
Package content
- PCIe riser card
Package
- Box
DELOCK 90433 - 4 port SATA PCI Express card, RAID
173.25 EUR
This PCI Express card by Delock expands the PC by four SATA 22 pin ports. Up to four 2.5? SSD / HDD can be connected to this card. When using more than one SATA port, there is the possibility to use different RAID modes.HyperDuo support
The card supports a HyperDuo function. With this function it combines an SSD and an HDD to use the advantages of both data mediums, the speed of an SSD and the capacity of an HDD.
RAID support
Furthermore, the card also supports various RAID modes such as RAID 0, 1, 10 or JBOD. Also, if enough SSD or HDD are installed, two different RAID modes can be used at the same time. For example, two hard disks with RAID 0 and two hard disks can be configured in HyperDuo or RAID 0 and RAID 1.
Specification
• Connectors:
internal:
1 x PCI Express x2, V2.0
4 x SATA 22 pin receptacle
• Chipset: Marvell 88SE9230
• Suitable for 2.5? SATA HDD / SSD:
SATA HDD / SSD up to 6 Gb/s
supports 5 V HDD / SSD
• Supports RAID 0, 1, 10, JBOD, HyperDuo Virtual Disk (Safe/Capacity)
• Bootable
• Supports Native Command Queuing (NCQ)
• Supports S.M.A.R.T.
• Supports TRIM
• Supports DevSleep
• Hot Swap
• Dimensions (LxWxH): ca. 227 x 120 x 20 mm
System requirements
• Linux Kernel 4.9.4 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC with one free PCI Express slot
Package content
• PCI Express card
• 16 x fixing screw
• 4 x HDD / SSD mounting bracket
• Driver CD
• User manual
Package
• Retail Box
DELOCK 42621 - External 2.5'' SATA HDD / SSD Enclosure, USB 3.1
31.45 EUR
This plastic enclosure by Delock can be used for the installation of a 2.5? SATA hard drive or SSD. Despite the slim design, hard disks up to a height of 9.5 mm can be installed. The included USB Type-C™ to USB Type-A cable allows the connection to a free USB Type-A female port.Transparent enclosure with stand
The sturdy, transparent plastic housing provides a view inside to quickly see which memory is inside. A stand is supplied for vertical operation.
HDD / SSD installation without tools
The special feature of this enclosure is that no tools are required to install the HDD. The lid can be pushed backwards by a little pressure, the HDD will be attached to the SATA port and then the lid is reattached until it locks.
Specification
• Connectors:
external:
1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ female
internal:
1 x SATA 6 Gb/s 22 pin receptacle
• Suitable for 2.5? SATA HDD / SSD:
HDD height up to 9.5 mm
SATA HDD / SSD up to 6 Gb/s
supports 5 V HDD / SSD
HDD / SSD up to 4 TB
• Chipset: VIA VL716
• Data transfer rate:
SuperSpeed USB 10 Gbps,
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• LED indicator for power and access
• Transparent plastic housing
• Dimensions (LxWxH): ca. 125 x 79 x 13 mm
• Hot Swap, Plug & Play
System requirements
• Chrome OS 74.0 or above
• Linux Kernel 3.3 or above
• Mac OS 10.14.5 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-A port
Package content
• 2.5? external enclosure
• Cable USB-C™ male to USB Type-A male, length ca. 50 cm
• Stand
• User manual
Package
• Retail Box
DELOCK 70154 - PCI SATA 4-channel RAID controller
46.08 EUR
The DeLock SATA PCI card adds four internal SATA ports to your PC. These can be used to connect SATA hard disks or other SATA devices (such as CD-ROM, CD-R/RW, DVD etc.).Technical data
• SATA specification revision 1.0
• RAID 0, 1 or 0+1
• Data transfer rate: up to 1.5 Gbps
• 32-bit PCI standard 2.2
System requirements
• PC with one free PCI slot
• Windows 98/ME/NT/2000/XP/XP-64/Server-2003/Vista 32/64, Linux
Package contents
• SATA controller
• 2 x SATA cables
• CD driver
• User manual
DELOCK 90061 - 8 port SATA PCI Express x8 Card with Connection Cable
195.95 EUR
The PCI Express card by Delock expands a PC by eight internal SATA ports. Different devices such as SSDs, hard drives, DVD-drives etc. can be connected to the card.Specification
- Connectors:
PCIe card:
1 x PCI Express x8, V2.0
2 x SFF-8087 female
2 x 2 pin LED pin header male
Connection cables:
1 x SFF-8087 male
4 x SATA 6 Gb/s 7 pin receptacle - Chipset: LSI SAS2008
- 12 x LED indicator
- Supports Native Command Queuing (NCQ)
- Supports S.M.A.R.T.
- Supports TRIM
- Supports DevSleep
- Hot Swap
- Bootable
System requirements
- Linux Kernel 5.4 or above
- Windows 8.1/8.1-64/10/10-64
- Windows Server 2019
- PC with one free PCI Express x8 / x16 / x32 slot
Package content
- PCI Express card
- Low profile bracket
- 2 x Cable SFF-8087 male to 4 x SATA receptacle, length ca. 80 cm
- User manual
Package
- Box