Hard drive accessories
The Best
DELOCK 42624 - External 2x 3.5'' SATA HDD Enclosure, USB 3.0, stand
61.73 EUR
This plastic enclosure by Delock is used for the installation of two 3.5? SATA hard drive. The included USB Type-C™ to USB Type-A cable allows the connection to a free USB Type-A female port.Transparent enclosure with stand
The sturdy, transparent plastic housing provides a view inside to quickly see which memory is inside. A stand is supplied for vertical operation.
HDD installation without tools
The special feature of this enclosure is that no tools are required to install the HDD. The lid can be pushed backwards by a little pressure, the HDD will be attached to the SATA port and then the lid is reattached until it locks.
Specification
• Connectors:
external:
1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ female
1 x DC jack
internal:
2 x SATA 6 Gb/s 22 pin receptacle
• On / Off switch
• Suitable for 3.5? SATA HDD:
SATA HDD up to 6 Gb/s
HDD up to 10 TB
• Chipset: JMicron JMS561U
• Data transfer rate:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• LED indicator for power and access
• Transparent plastic housing
• Dimensions (LxWxH): ca. 174 x 113 x 60 mm
• Hot Swap, Plug & Play
System requirements
• Chrome OS 74.0 or above
• Linux Kernel 3.4 or above
• Mac OS 10.14.5 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-A port
Package content
• 3.5? external enclosure
• Cable USB-C™ male to USB Type-A male, length ca. 1 m
• Stand
• Power supply
• User manual
Power supply specification
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.2 A
• Output: 12 V / 3 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.0 mm
outside: ø ca. 5.5 mm
length: ca. 10 mm
Package
• Retail Box
Top Pick
DELOCK 42612 - External 3.5'' SATA HDD Enclosure, USB 3.0
38.57 EUR
This plastic enclosure by Delock can be used for the installation of a 3.5? SATA hard drive.Fast data transfer due to SuperSpeed USB
Due to the JMicron chipset, this hard disk enclosure supports SuperSpeed USB with up to 5 Gbps transfer speed. This allows data to be transferred quickly to and from the hard disk.
Specification
• Connectors:
external:
1 x SuperSpeed USB (USB 3.1 Gen 1) Type-A female
1 x DC jack
internal:
1 x SATA 6 Gb/s 22 pin receptacle
• Suitable for all 3.5? SATA HDDs up to 6 Gb/s
• Chipset: JMicron JMS578
• Data transfer rate:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• Supports UASP
• On / Off switch
• LED indicator for power and access
• Plastic housing
• Colour: black
• Dimensions (LxWxH): ca. 186 x 116 x 35 mm
• Hot Swap, Plug & Play
System requirements
• Linux Kernel 3.3 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-A port
Package content
• 3.5? external enclosure
• Cable USB Type-A male to Type-A male, length ca. 60 cm
• Power supply
• User manual
Power supply specification
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.8 A
• Output: 12 V / 2 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 11 mm
Package
• Retail Box
Excellent
AXAGON AXG ADSA-D25 - Docking station 2x 2.5-inch SATA, USB 3.0
33.62 EUR
Dual USB 3.2 Gen 1 docking station for 2.5-inch SATA SSD/HDD.- Interface: USB 3.2 Gen 1
- Output: SATA 6G, UASP
- PC connection: USB type A-M, switchable cable, 1 m cable
- Device support: 2.5-inch HDD/SSD
- Design: Metal enclosure
- Extra: TRIM, cloning of drive drives
The AXAGON ADSA-D25 CLONE MINI SuperSpeed USB 5 Gbps docking/cloning station quickly and easily connects up to two 2.5-inch hard drives to your computer at the same time. USB Micro-B port on the dock allows you to connect to a computer along with the supplied USB Micro-B <-> USB-A cable.
Thanks to this compatible aid, any 2.5-inch SATA hard drive can be connected to a computer or notebook in the simplest way. One or even two hard drives can be inserted into the socket at the same time. No tools or accessories are required. Replacing hard drives is incredibly quick and easy.
Recommended
ICYBOX ICY IB-138SKSIIB - ICY dock removable frame, ALU, SATA I+II, black
59.51 EUR
IB-138 Series SATA aluminium removable frame, black• SATA to SATA port
• Plug & Play and Hot Swap
• Compact size (188 mm depth)
• Anti-dust cover
• 2x power connector (4 pin and 15 Pin)
• Solid aluminium
• Front fan (40x40x10mm
• Key lock as power switch
• Blue Eye design
• LED indicator for hard disk access (Device Activity Signal)
• Available in black, silver and beige
The removable frame is designed for use with SATA hard drives. Connection is made directly to the SATA controller on the mainboard via the SATA connector on the back. The solid aluminium housing with front fan handles cooling for the hard drive.
The “Blue Eye” LED on the front panel add a special visual appeal.
Accessories:
• 2x keys, 4x screws for HDD,
• 8x screws for U-frame, 1x HDD access cable,
• 1xSATA cable (with plug lock)
Featured
SANDBERG 136-37 - Adapter USB 3.0 > SATA
35.74 EUR
- Immediate hard drive connection
- Data rates up to 10 Gbit/s
The Sandberg USB-C to SATA link allows you to connect a 2.5-in SATA hard drive to your computer externally. The USB-C port allows you to achieve impressive data transfer speeds of up to 10 Gbps when transferring data. This is ideal especially if you want to move large amounts of data and perform frequent backups.
Alternative
LOGILINK UA0219 - Hard disk protective case for 8x 3.5'' and 6x 2.5''
44.68 EUR
The LogiLink hard disk protective case ensures safe storage of desktop hard disks. The padding protects the drives from knocks during transport and also offers space for accessories. The robust case protects your hard disks from dust and dirt. The integrated lock secures data against unauthorised access.• For easy storage of HDDs at home or in the office
• Protects from water and dust
• For all 3.5''/2.5'' HDDs
• Material: ABS
• Protects your HDDs when they are not installed in the PC
• Size: 313 x 163 x 163 mm
• Suitable for up to 8x 3.5'' and 6x 2.5'' HDDs
ICYBOX ICY IB-1124L-C3 - Single-bay SATA SSD/HDD docking station
39.41 EUR
The nicely shaped body of this docking station boasts a blue light ring and LED accents, as well as a slot for a 2.5- or 3.5-inch SSD/HDD. Data transfer rates of up to 5 Gbit/s are possible via the USB 3.0 host connection. The docking station can be flexibly connected to almost all common computers thanks to the USB Type-B to Type-A or Type-C® cable.Main characteristics
- SATA I/II/III SSD/HDD to USB 3.0
- Connects to the host computer via USB 3.0 with up to 5 Gbit/s
- Supports 2.5- and 3.5-inch SATA drives
- LED ambient lighting
- Plug & Play and HotSwap
Package contents
- IB-1124L-C3
- USB 3.0 cable (USB Type-B to USB Type-A/Type-C®)
- Plug-in power supply
- Manual
DELOCK 47192 - Mobile rack, PCI slot 2.5'' SATA HDD
39.91 EUR
This mobile rack can be installed in a free slot of your computer to upgrade your 19-inch PC or desktop PC with an additional 2.5'' SATA HDD hard drive. You can also exchange your HDD at any time during operation as the mobile rack supports a Hot Swap function.Technical data
• For installation in a free slot (such as PCI or PCI Express)
• For 1 x 2.5'' SATA HDD
• Suitable for all 2.5'' SATA HDDs up to 6 Gb/s
• Data transfer rates of up to 6 Gb/s
• Hot Swap
• OS independent, no driver installation required
System requirements
• PC with one free slot
• A free SATA port
Package contents
• Changeable frame
• 1 x SATA data cable, 1 x SATA power cable
• Screws
• Instructions
Packaging
• Retail box
DELOCK 42605 - External Enclosure 5.25 Slot-in Slim SATA Drives 9.5/12.7 mm, US
46.23 EUR
This enclosure by Delock is an external solution for different Slot-in Slim SATA drives with 9.5 or 12.7 mm height, e.g. DVD-ROM, DVD±RW, Blu-ray etc. Thus the built-in drive will be converted into a mobile drive. The enclosure is connected to the computer or laptop via the USB Type-C™ plug.Specification
- Connectors:
external:
1 x SuperSpeed USB (USB 3.1 Gen 1) USB Type-C™ male
internal:
1 x Slim SATA 13 pin receptacle - Chipset: Initio INIC-3619
- For Slim SATA drives up to 12.7 mm height
- Supports DVD±RW, DVD-ROM, CD-RW, CD-ROM, Blu-ray
- Hot Swap, Plug & Play
- No external power supply needed
- Housing material: plastic
- Colour: silver / black
- Cable length: ca. 28 cm
- Dimensions (LxWxH): ca. 143 x 139 x 16 mm
System requirements
- Linux Kernel 2.6.38 or above
- Mac OS 10.9.5 or above
- Windows 7/7-64/8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-C™ port
Package content
- External enclosure
- User manual
- Package
- Retail Box
ICYBOX ICY IB-1817M-C31 - External Type-C aluminium enclosure for M.2 NVMe SSD
39.87 EUR
Externes Type-C™ Gehäuse für M.2 NVMe SSDHaupteigenschaften
- hochwertiges Aluminium im innovativen Kühlrippendesign
- Anschluss zum Hostcomputer: USB 3.1 (Gen 2) Type-C™, bis zu 10 Gbit/s
- unterstützt PCIe 3.0 x2 Datentransferraten mit bis zu 1000 Megabyte pro Sekunde
- M-Key Sockel für NVMe SSDs, 22x 30/42/60/80 mm
- verfügt über zusätzlichen, patentierten Kühlkörper und Wärmeleitpad im Inneren
- Aktivierung des Schreibschutzes per Schalter
- LED für Betrieb, Festplattenzugriff und Schreibschutz
- unterstützt Windows®, macOS®
Schnell und mobil
Mit dem externen USB 3.1 Typ-C™ Gehäuse IB-1817M-C31 kann eine NVMe SSD schnell und einfach mitnehmen. Es erlaubt Zugriff auf M.2 Datenträger von bis zu 2 TB, egal mit welchem Hostcomputer es verbunden wird.
Bleibt immer cool
Durch die patentierte Kühlplatte wird die entstehende Abwärme der SSD an das Gehäuse weitergegeben und die SSD somit optimal gekühlt. Dies verhindert die sonst übliche, vorzeitige Reduzierung der Übertragungsrate zum Schutz vor Überhitzung. Mit dem IB-1817M-C31 können Daten also dauerhaft mit maximaler Übertragungsrate von bis zu 10 Gbit/s von A nach B gesendet werden.
Zeit ist kostbar
Die IB-1817M-C31 ist kompatibel mit M.2 SSDs der Längen 30, 42, 60 und 80 mm, betriebssystemunabhängig und für eine Vielzahl von Anwendungen wie Hochgeschwindigkeitsspeicherung, Klonen eines Laufwerks oder das Ausführen eines mobilen Betriebssystems geeignet. All dies passiert mit einer Datenübertragungsrate von bis zu 1000 Mb pro Sekunde. Im Vergleich zur Datenübertragung mit einem SATA Laufwerk wird eine Datenmenge von 50 Gigabyte nun in 50 Sekunden statt 1:36 Minuten übertragen.
Klick - Sicher
Mit der IB-1817M-C31 können sensible Daten auf der verbauten M.2 SSD per Schalter vor Veränderungen geschützt und wieder freigegeben werden. Mit dem mitgelieferten, praktischen Mini-Werkzeug und einer kleinen Handbewegung lässt sich der dafür zuständige Schalter des IB-1817M-C31 in die gewünschte Position bewegen. Klick - Sicher.
ICYBOX ICY IB-129SSK-B - 1 x 5.25-inch removable frame for 1 x 2.5/3.5-inch SATA
44.01 EUR
- Removable frame for 1 x 5.25-inch bay
- For 1 x 3.5-inch or 2.5-inch SATA HDD
- Lock
- Hot swap
- LEDs for power and hard disk access
Carrierless = twice as fast
Because you do not have to fix the 3.5-inch hard disk in a carrier, you do not need a screwdriver and the installation and removal can be done twice as quickly. Space in a 5.25-inch bay is required. SATA hard disks with the speed of SATA I, II and III are supported.
No fan = whisper quiet
The enclosure of the removable frame is made almost completely of aluminium, only the front and back panels are made of hard plastic. Although it is very light, aluminium is very strong and above all it is known for its wonderful thermal conductivity. This means no noisy fan is required, all without damaging the hard disk. An optional 12-V fan can be connected (not included in the scope of delivery).
ICYBOX ICY IB-2216STS - 1 x 3.5-inch removable frame for 1 x 2.5-inch SATA
33.67 EUR
- Removable frame for 1 x 3.5-inch bay
- 1 x 2.5-inch SATA HDD/SSD with a height of up to 9.5 mm
- Easy Swap® - HDD or SSD installation without tools
- Hot swap
- LEDs for power and hard disk access
Looking for a small partner
Both parts should have a form factor of 2.5 inches, SATA as a connection and a maximum height of 9.5 mm, so that everything all fits comfortably together. If it's a match, data is transferred at a speed of up to 3 Gbps (SATA I, II).
Quiet and lightweight
3.5-inch form factor: not heavyweight. And it's quiet - that's a promise. The aluminium housing keeps it cool and nothing is loud as it doesn't need a fan.
Get connected quickly
With hot swap and Plug and Play, making new connections is fast. Without tools, it's also convenient.
DELOCK 18282 - Installation Kit 2.5? to 3.5?
17.91 EUR
This installation kit by Delock enables the installation of a 2.5'' device like a hard drive or SSD into a free 3.5'' bay of the PC.Specification
- Installation kit for 3.5'' bay with or without rail
- For 2.5'' devices
System requirements
- A free 3.5'' bay
Package content
- Mounting bracket
- 8 x screw
Package
- Retail Box
ICYBOX ICY IB-AC653 - Mounting frame for 2.5'' HDD/SSD in 3.5''
16.67 EUR
Main Characteristics- Suitable for a standard 3.5'' installation slot
- Allows the installation of 1x 2.5'' HDD/SSD
- Frame made of solid metal for better heat dissipation of the HDDs/SSDs
Good and cheap
If you just want to upgrade your computer with a 2.5'' HDD/SSD, but only have a 3.5'' installation slot available, the IB-AC653 is the right one. The mounting frame is easy to install.
When the new technology takes its toll
...and you have particularly high demands on capacity and speed, then the IB-AC653 is helpful. The practical metal mounting frame ensures the professional installation of a HDD or SSD of the form factor 2.5'' and only requires a free 3.5'' bay.
Optimally stowed
One of the main causes of a shortened life cycle of hard drives is a high heat exposure. On the other hand, this compact mounting frame protects in two ways: It is made of well heat-dissipating solid metal and even leaves enough space under the built-in hard disk for good air circulation.
Any Size
Due to the variable screw connection on the underside, all common 2.5'' hard disk types can be used.
Technical Data:
- Material: Steel
- Color: Black
- Hard disk connection: 1x 2.5'' HDD/SSD
ICYBOX ICY IB-2227STS - 1 x 3.5-inch removable frame for 2 x 2.5-inch SATAs
57.44 EUR
- Removable frame for 1 x 3.5-inch bay
- 2 x 2.5-inch SATA HDD/SSDs with a height of up to 9.5 mm
- Lock - protects against accidental opening
- Easy Swap® - HDD or SSD installation without tools
- Hot swap
- LEDs for power and hard disk access
Safe spaces for hard disks
Installed in a 3.5-inch bay, each hard disk has its own bay in which it can be easily mounted and also removed again. Hard disk are installed and removed without a carrier and therefore without tools either.
Better safe than sorry
Both hard-drive carriers can be mounted or locked separately. Unauthorised persons will not gain access to the hard drives. Internally, the removable frame is connected using 2 SATA connectors. There are two separate 4-pin connectors for the LED indicators.
Cool and stable
The enclosure is mainly made of metal, with the front panel made separately from high-quality aluminium. Metals are known for their excellent thermal conductivity (passive convection). This ensures a certain amount of cooling without making the removable frame loud during use.
ICYBOX ICY IB-223U3A-B - External 2.5-inch SATA HDD/SSD housing, USB 3.0, silicone
24.11 EUR
- External housing for 2.5-inch hard drives including silicone protective cover
- USB 3.0 host port - up to 5 Gbit/s with UASP support
- New chipset supports SATA III
- Tool-less hard drive installation
- LED for operation and hard drive activity
- Hard drive height up to 9.5 mm, unlimited capacity
- Compatible with Windows and Mac
- Plug & Play and Hot Swap
The meeting of style and technology
The style: Surface in a carbon look, protected by a slim silicone frame. The technology: USB 3.0 with UASP support for super-fast data transfer from and to the 2.5-inch SATA hard drive in the stylish housing.
Show me your plaids
The noble carbon look really adds something, turning the data catcher into an eye-catcher. Thanks to its unobtrusive look, the case blends perfectly into your workspace.
Silicone protective ring
The slim silicone frame provides for sturdy support and also absorbs damage from falls and thus provides additional protection for the hard drive.
ICYBOX ICY IB-158SSK-B - 1 x 5.25-inch removable frame for 1 x 3.5-inch SATA
37.34 EUR
- Removable frame for 1 x 5.25-inch bay
- For 1 x 3.5-inch SATA HDD
- Lock
- Easy Swap - tool-free hard disk installation
- Hot swap
- LEDs for power and hard disk access
Carrierless = twice as fast
Because you do not have to fix the 3.5-inch hard disk in a carrier, you do not need a screwdriver and the installation and removal can be done twice as quickly. Space in a 5.25-inch bay is required. SATA hard disks with the speed of SATA I, II and III are supported.
No fan = whisper quiet
The enclosure of the removable frame is made almost completely of aluminium, only the front and back panels are made of hard plastic. Although it is very light, aluminium is very strong and above all it is known for its wonderful thermal conductivity. This means no noisy fan is required, all without damaging the hard disk. An optional 12-V fan can be connected (not included in the scope of delivery).
LOGILINK UA0276 - USB 3.0 - 3.5'' SATA hard drive housing
29.38 EUR
Solid plastic hard drive housing for 3.5'' SATA hard drivesDetails:
- For connecting 3.5'' (8.89 cm) SATA hard drives (SATA I/II/III)
- Compatible with USB 3.0 (5 GBit/s), USB 2.0 (480 MBit/s), and 1.1 (12 MBit/s)
- External power supply 12 V, 2 A included
- With on/off switch
- Supports Windows 2000/2003/XP/Vista//7/8/10
- Dimensions: 190 x 115 x 33 mm
- Weight: 160 g
DELOCK 47189 - Delock 3.5'' mobile rack for 2x 2.5'' SATA
67.21 EUR
Delock 3.5'' mobile rack for 2x 2.5'' SATA HDDThis metal mobile rack can be installed in a free 3.5'' bay of your desktop PC.
Two 2.5'' SATA hard drives can be slotted into the rack.
The Hot Swap function enables both SATA hard drives to be switched during operation.
Technical data
• For installation in 3.5'' bays
• For 2x 2.5'' SATA HDD
• For SATA I or SATA II HDD
• Data transfer rate up to 3 GB/s
• Hot Swap
• Optional HDD fan (mounting holes on the bottom of the rack)
System requirements
• OS independent, no driver installation required
• PC with a 3.5'' bay and two free SATA ports
Package contents
• Changeable frame
• 2x SATA data cables, 2x SATA power cables
• Screws
• User manual
DELOCK AK 3198 - S-ATA power adapter
12.42 EUR
Power supply cable for S-ATA hard drives• Power connection adapter for 2 x S-ATA HDDs
• 2 x 15-pin SATA to 4-pin
• Length: 152 mm
ICYBOX ICY IB-246-C31-G - External 2.5'' SATA enclosure, USB 3.1, silicone
34.71 EUR
- SSD & HDD: external housing for 2.5'' SSD/HDD
- USB 3.2 (gen 2) type-C® to type-A® cable
- Data transfer rates of up to 10 Gbit/s
- Silicone case: Protects device and data
- High-grade aluminium enclosure
- Supports hot swap and Plug & Play
A USB 3.2 (gen 2) housing for 2.5'' SATA SSDs and HDDs with a height of up to 9.5 mm can be installed safely and completely without tools. The additional silicone case protects against damage in the event of a fall. The installed memory is therefore ideally protected and can travel safely in luggage. The USB-C connection provides transfer rates of up to 10 Gbit/s and thus for super-fast data exchange. At the same time, the housing is backwards compatible with USB 3.0 and USB 2.0.
100% tool-free
The IB-246-C31-G is an aluminium housing in which a 2.5'' SATA hard disk can be inserted. No tools are required, therefore the SSD can be installed anywhere quickly and easily. SSDs or HDDs with a height of up to 9.5 mm can be installed.
DELOCK 47194 - Delock mobile rack, 8.89 cm, for 1x 6.35 cm SATA
47.06 EUR
Delock 8.89 cm (3.5'') mobile rack for 1x 6.35-cm (2.5'') SATA HDDThis metal mobile rack can be installed in your desktop PC in a free 8.89-cm bay.
One 6.35-cm SATA hard drive can be slotted directly into the rack.
The drive can also be changed during operation as this product supports a Hot Swap feature.
Technical data
• For installation in 8.89-cm (3.5'') bay
• For 1x 2.5'' SATA HDD
• For SATA I or SATA II HDD
• Data transfer rate up to 3 GB/s
• Hot Swap
• Optional HDD fan (mounting holes on the bottom of the rack)
• OS independent, no driver installation required
System requirements
• PC with a 8.89 cm (3.5'') bay and a free SATA port
Package contents
• Changeable frame
• SATA data cable, SATA power cable
• Screws
• Instructions
--Hard drive not included--!
ICYBOX ICY IB-3810-C31 - 10x 3.5-inch SATA HDD enclosure, USB 3.0
506.03 EUR
- Enclosure for 10x 3.5-inch SATA I, II and III (6 Gbit/s) drives
- Host port: USB 3.1 (gen. 2), with a transfer rate of up to 10 Gbit/s
- EasySwap: easy to handle thanks to hard drive installation method that does not require brackets
- Supports SINGLE mode - each drive is controlled separately
- Hard disks can be switched on and off individually without interrupting the connection
- LED for: operation, hard disk in use and access
- 140-mm fan for optimal cooling and quiet running
- Energy-efficient thanks to automatic standby mode
- Plug & Play and HotSwap
Oodles of storage
A superlative storage space! This external SINGLE enclosure holds a total of ten SATA I/II/III hard drives, which you can switch on and off individually via a switch and also lock individually with a drive lock. The enclosure's impressive performance is partly thanks two active interior fans that are excellent at dissipating the operating heat. In addition, air inlets on the doors of the drive bays and the high amount of steel in the enclosure itself further ensure good cooling properties.
LOGILINK UA0193 - Hard disk protective case for 10 x 3.5''
42.92 EUR
The LogiLink hard disk protective case ensures safe storage of desktop hard disks. The padding protects the drives from knocks during transport and also offers space for accessories. The robust case protects your hard disks from dust and dirt. The integrated lock secures data against unauthorised access.• For storing and transporting your hard disks
• Protects hard disks from dust and water
• Suitable for all 3.5'' hard disks
• Practical carry handle
• Including a key to lock the case
• Dimensions: 245 x 240 x 200 mm
LC POWER LC-DOCK-U3-III - Docking station 2x 2.5''/3.5'' SATA, USB 3.0
35.69 EUR
USB 3.0 dual bay HDD docking station with copy function.- Suitable for 2.5''/3.5'' SATA-HDDs and SSDs
- 2.5'' up to 1 TB, 3.5'' up to 10 TB
- Copy function available at the touch of a button
- Hot-Swap function
- Tool-free HDD/SSD replacement
- USB 3.0 port
System compatibility:
Microsoft Windows XP/Vista/7/8/8.1/10, Mac OS 9.1 or higher
Included in delivery:
Docking station, USB 3.0 cable, mains adapter and instruction manual
ICYBOX ICY IB-1916M-C32 - External M.2 NVMe SSD housing with USB 3.2
56.98 EUR
- High-quality aluminium enclosure with innovative cooling rib design
- PCIe 3.0 x4 data transfer rates of up to 20 Gbit per second
- M-Key socket for NVMe SSDs, 22x 80 mm
- Connection to host computer: USB 3.2 (Gen 2x2) type C®
- Backwards compatible with USB 3.1/3.0/2.0
- Includes copper heatsink and silicone heat pad inside
- Supports Windows®, macOS®
External USB Type-C® enclosure for M.2 NVMe SSD
The external USB 3.2 Type-C® enclosure IB-1822MF-C31 lets you take an NVMe SSD with you quickly and easily. It allows access to M.2 media up to 2 TB, no matter which host you connect it to. The IB-1916M-C32 is compatible with M.2 SSDs 80 mm in length, is operating system-independent and suitable for a variety of applications such as high-speed storage, cloning a drive or running a mobile operating system.
USB 3.2 (Gen 2x2)
Motherboards and external enclosures that support USB 20 GBit/s ports are on the rise even before the new USB4 standard is adopted. If you keep up with current trends, you should be disposing of your sluggish hard drive enclosure, because the new ICY BOX M.2 NVMe enclosure is now even faster and more versatile!
CHIEFTEC CFT CBP-3141SAS - Mobile rack 3x 5.25 for 4x 3.5/2.5 SAS/SATA
135.33 EUR
- Professional data backup
- Hot Swap
- Plug and Play compatible
- Interlocking with key possible
- Space-saving
With its patented anti-vibration design, the new backplane sets cutting-edge standards. It is suitable for a wide range of applications, unlike other backplanes. The body, made of high-quality aluminium, requires only three 5.25'' slots and offers space for four 3.5'' or 2.5'' hard disks or SSDs. SATA I/II/III and SAS I/II are supported.
Interface (HDD/SSD): SATA I, SATA II, SATA III, SAS I/II
Dimensions (D x W x H): 202mm x 146mm x 126mm
Weight: 1.79 kg
Form factor: 3x 5.25'' slots for 4 HDDs/SSDs (3.5''/2.5'')
Fan: 80 mm fan (slide bearing)
Power supply: 1x SATA
Data ports (external): 4 x SATA
Supported RAID levels: No RAID controller in the device
Features:
- Fan failure LED
- Reset switch for buzzer alarm
- Overheating LED
- Data transfer with up to 6 Gbps (SATA III/SAS)
Included: backplane, 4x SATA cables (60 cm), set of screws, quick start guide (English)
STARTECH.COM ST SAT2IDEADP - 2.5'' to 3.5'' hard drive adapter
37.81 EUR
Use your 2.5-inch or 3.5-inch IDE hard drives in a SATA hard-drive docking station.- Suitable for 40-pin (3.5-inch) and 44-pin (2.5-inch) IDE hard drives
- Sturdy metal construction
- Compatible with most StarTech.com 3.5-inch SATA hard drive docking or copy stations
- Supports high-capacity hard drives thanks to 48-bit LBA
- Complies with SATA revision 1.0
With the SAT2IDEADP SATA to IDE hard drive adapter, you can use your 2.5/3.5-inch IDE-based (PATA) hard drives in most StarTech.com SATA-based hard drive docking and copy stations. The SATA IDE adapter is made of a full metal construction, which makes it very resistant and is fully compatible with IDE hard drives up to ATA-133 (133 MB/s).
Thanks to its unique design, the SATA/IDE adapter can be easily placed on an IDE/ATA hard drive or in a SATA docking bay for quick and easy access to data from older hard drives. The adapter is also used to install IDE hard drives in desktop computers that use only SATA or for all other scenarios in which an IDE hard drive must be connected to a serial ATA.
INTER-TECH IT88884062 - Removable frame 5.25 for 1x 2.5/3.5 SATA
23.34 EUR
The X-3534 is an internal HDD docking station for operating a 3.5-inch or 2.5-inch hard disk and requires a free 5.25-inch bay in order to be installed.Power can be supplied via a Molex or SATA power connector.
DELOCK 64089 - Dockingstation 2.5''/ 3.5'' SATA HDD, USB 3.1
52.11 EUR
This Docking Station by Delock enables an external connection of one 2.5? or 3.5? SATA HDD or SSD through the USB-C™ interface. This solution does not require an external enclosure since the drive can just plug in directly into the docking station. The included USB cables allow the connection to a free USB Type-A or USB-C™ port.Transparent enclosure
The sturdy, transparent plastic housing provides a view inside.
Specification
• Connectors:
1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ female
1 x SATA 6 Gb/s 22 pin receptacle
1 x DC jack
• Chipset: VIA VL716
• On / Off switch
• For 2.5? and 3.5? SATA HDD / SSD
• Suitable for all SATA HDDs up to SATA 6 Gb/s
• Data transfer rate up to 6 Gb/s
• LED indicator for power and access
• Transparent plastic housing
• Dimensions (LxWxH): ca. 142 x 75 x 58 mm
• Plug & Play
System requirements
• Chrome OS 74.0 or above
• Linux Kernel 3.3 or above
• Mac OS 10.14.5 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-C™ port or
• PC or laptop with a free USB Type-A port
Package content
• Docking station
• Cable USB-C™ male to USB-C™ male, length ca. 50 cm
• Cable USB-C™ male to USB Type-A male, length ca. 1 m
• External power supply 12 V / 2 A
• User manual
Power supply specification
• Wall power supply
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1 A
• Output: 12 V / 2 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 10 mm
Package
• Retail Box
STARTECH.COM ST 25SATSAS35 - 2.5'' SAS/SATA/SSD to 3.5'' SATA converter
30.42 EUR
Turn virtually any 2.5-inch SATA or SAS hard drive into a 3.5-inch drive- No-shelf design: Hard drives are not mounted in separate slots/enclosures
- Supports 2.5'' form factor SATA (HDD) and solid state (SSD) drives up to 15 mm high
- Power LED
- Lightweight plastic construction with ventilation openings
- Plug and Play and Hot Swap compatible
The 25SATSAS35 2.5-inch SATA/SAS to 3.5-inch SATA hard drive converter converts a 2.5-inch SATA or SAS hard drive (HDD) or Solid State Drive (SSD) into a 3.5-inch form factor SATA hard drive.
The converter is a versatile 2.5-inch drive installation solution that allows you to install a 2.5-inch SATA/SAS drive into a 3.5-inch bay, drive-drawer caddy/bay, or into a 3.5-inch drive cage.
To optimize performance and take full advantage of the speed potential of SATA III hard drives, this HDD backplane supports SATA III with transfer speeds up to 6 Gbit/s in combination with a compatible controller.
Capable of supporting drives up to 15 mm in height, virtually any 2.5-inch SATA or SAS hard drive can be given the appearance and function of a 3.5-inch hard drive. The drive converter provides mounting holes along the side and bottom, so you can mount the drive in a compatible system if necessary.
The drive converter is a single-slot design for easy drive insertion and removal, and is made of durable, yet lightweight plastic with vents to support airflow and hard drive cooling.
ICYBOX ICY IB-AC703-U3 - External 2.5-inch HDD/SSD housing, USB 3.0, adapter
20.18 EUR
- Supports 2.5-inch SATA III 6 Gbit/s hard drives/SSDs
- USB 3.0 host port - 5 Gbit/s with UASP
- With hard-drive protection box
- Supports Windows and Mac
- Plug & Play and Hot Swap
Two birds with one box
The IB-AC703-U3 for a 2.5-inch SATA hard drive/SSD, SATA III consists of an adapter to USB 3.0 including power supply and a plastic housing. You can use both individually or together. Using USB 3.0 technology, the adapter can be connected directly to a USB 3.0-compatible computer, media player or similar device and can achieve transfer rates of up to 5 Gbit/s.
Fast data transfer
Up to 5 Gbit/s can be achieved with USB 3.0, making data transfer quick and reliable! The adapter is hot-swap and plug-and-play capable, enabling driverless start-up and fast replacement of the hard drive.
DELOCK 47209 - 5.25 mobile rack for 2.5 ''/3.5'' HDD
77.08 EUR
This mobile rack can be installed in a free 5.25'' bay of your desktop PC. You can insert a 2.5 SATA hard drive and a 3.5 SATA hard drive into the rack and replace them at any time. The mobile rack also provides two USB 3.0 ports to connect additional USB devices.Special properties
• Anti-vibration on mobile rack protects the HDD against shocks
• Mechanical spring stabilises the HDD
• Control board for automatic power-off of respective HDD when flap is opened
Technical data
• For installation in 5.25 bays
• Suitable for all 2.5 SATA HDDs and 3.5 HDDs up to 6 Gb/s
• Data transfer rates of up to 6 Gb/s
• Mobile rack with key-operated switch
• 2 x status LEDs
• Hot Swap
• OS independent, no driver installation required
Connectors:
Front side:
1 x 2.5 SATA HDD bay
1 x 3.5 SATA HDD bay
2 × USB 3.0 type A ports
1 x on/off switch
Rear:
2 x SATA 22-pin
1 x 19-pin USB 3.0 pin header
System requirements
• PC with a 5.25 bay
• PC with two free SATA ports
• Power supply unit with a free SATA or Molex power connector
Package contents
• Changeable frame
• 2 x SATA data cable
• 1 x SATA power cable
• 1 x key
• Screws
• User manual
DELOCK 18000 - 5.25 Installation Frame for 1x 3.5 + 2x 2.5
22.35 EUR
This Delock installation frame is multifunctional useable in a 5.25 drive bay of a computer. It can supports a 3.5 device like a card reader on the bottom side, and additional two 2.5 hard drives above. Furthermore, instead of a 3.5 device another 3.5 hard drive can be installed. For that purpose the 3.5 cover must be removed from the frame and inserted at the front.Specification
• For installation into 5.25 bay
• For 1. option:
1 x 3.5 device
2 x 2.5 HDD / SSD
2. option:
1 x 3.5 HDD / SSD
2 x 2.5 HDD / SSD
3. option:
3 x 2.5 HDD / SSD
• For 2nd and 3rd option the cover must be removed from the frame and inserted in the front
• Supports 2.5 hard drive height:
2 x 7 mm up to 9.5 mm
1 x 7 mm up to 15 mm
• Material: plastic
• Colour: black
System requirements
• PC with one free 5.25 bay
Package content
• 5.25 installation frame
• Screws
Package
• Retail Box
STARTECH.COM ST SM2NGFFMBU33 - External M.2 housing, USB 3.0 micro B.
46.64 EUR
Turn your Solid State Drive into an extremely portable pocket drive- Boost external performance by taking advantage of the speed of your SATA M.2 SSD in a USB 3.0 chassis with UASP support
- Comprehensive compatibility with support for the most common SATA M.2 SSDs (30 mm, 42 mm, 60 mm, 80 mm)
- Optimize mobility with small footprint, lightweight and USB-powered performance
- Compatible with USB 3.0/2.0/1.1 (5 Gbit/s/480 Mbit/s/1.5 Mbit/s)
- SATA Revision I/II/III compatible (1.5/3.0/6.0 Gbit/s)
The external USB 3.0 to M.2 (NGFF) SM2NGFFMBU33 chassis turns your SATA M.2 solid state drive into a mobile high speed USB 3.0 drive.
Boost external performance by using a M.2 SSD instead of a disk drive and take full advantage of your USB 3.0 computer system. The chassis supports UASP, so when used with a UASP-enabled host computer, you can achieve 70% faster transfer speeds than a traditional USB 3.0.
This slim, pocket-sized SSD case is designed for mobility. Lightweight yet durable, the case fits easily into your pocket or laptop bag. In addition, the housing is fully powered via the USB host bus and does not require an external power supply.
The durable aluminum construction helps to keep the drive from being damaged while on the move. In addition, to optimize heat dissipation, the chassis has been equipped with specially designed ventilation openings that help to provide a cooler operating environment for optimal performance and longer drive life.
Various drive heights can be mounted for full compatibility with all standard M.2 solid state drives, including: 2242, 2260 and 2280.
Better performance with UASP
UASP is supported on Windows 8, Max OSX (10.8 or later), and Linux. In tests, UASP shows a 70% higher read speed and 40% higher write speed at maximum performance compared to conventional USB 3.0.
With the same peak performance in the test, UASP also shows a 80% reduction in the required processor resources.
Test results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com-Gehäuses, and a SATA III solid-state drive.
LOGILINK UA0314 - External SSD enclosure, M.2 (NGFF), USB 3.2 Gen 2
37.81 EUR
UA0314 is a portable M.2 SATA (NGFF) SSD storage solution with 10Gbps data transfer rate. Once being installed into PC/laptop, the M.2 SSD appears as an ordinary SATA storage to any OS and can be configured as a bootable device.- Suitable for M.2 (NGFF) 2230/2242/2260/2280 SATA (B or B+M key) SSD
- M.2 SATA III interface with up to 6 Gbit/s data transfer
- USB-C 3.2 Gen 2 female connector with up to 10 Gbit/s data transfer
- High quality aluminum housing
- Easy to transport thanks to its light and compact design
- Bootable (depending on used M.2 SDD and mainboard BIOS)
- Power supply via USB connector
- Compliant with PCI Express M.2 specification 1.0
- Supports Windows 7/8/10, Mac OS and Android (with OTG function)
- Color: Black
- Material: Aluminum
- Package contents: 1x USB 3.2 connection cable USB-C to USB-C, screwdriver, SSD-mounting screws
- ATTENTION: Only for use with M.2 SATA SSD, no M.2 PCIE SSD fits into the enclosure! Compatible with SATA ''B-Key'' and ''B+ M Key'' / Not compatible with PCIe ''B-Key'', ''M-Key'' and ''B+M Key