DELOCK 42612 - External 3.5'' SATA HDD Enclosure, USB 3.0
39 EUR
Consult the informative sheet with in-depth details, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; falls into the CATEGORY NAME; the product is marketed by SELLER NAME and produced by MANUFACTURER NAME.
This plastic enclosure by Delock can be used for the installation of a 3.5? SATA hard drive.
Fast data transfer due to SuperSpeed USB
Due to the JMicron chipset, this hard disk enclosure supports SuperSpeed USB with up to 5 Gbps transfer speed. This allows data to be transferred quickly to and from the hard disk.
Specification
• Connectors:
external:
1 x SuperSpeed USB (USB 3.1 Gen 1) Type-A female
1 x DC jack
internal:
1 x SATA 6 Gb/s 22 pin receptacle
• Suitable for all 3.5? SATA HDDs up to 6 Gb/s
• Chipset: JMicron JMS578
• Data transfer rate:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• Supports UASP
• On / Off switch
• LED indicator for power and access
• Plastic housing
• Colour: black
• Dimensions (LxWxH): ca. 186 x 116 x 35 mm
• Hot Swap, Plug & Play
System requirements
• Linux Kernel 3.3 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-A port
Package content
• 3.5? external enclosure
• Cable USB Type-A male to Type-A male, length ca. 60 cm
• Power supply
• User manual
Power supply specification
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.8 A
• Output: 12 V / 2 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 11 mm
Package
• Retail Box
EAN: 4043619426126
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 6-8 business days
Condition: new
This plastic enclosure by Delock can be used for the installation of a 3.5? SATA hard drive.
Fast data transfer due to SuperSpeed USB
Due to the JMicron chipset, this hard disk enclosure supports SuperSpeed USB with up to 5 Gbps transfer speed. This allows data to be transferred quickly to and from the hard disk.
Specification
• Connectors:
external:
1 x SuperSpeed USB (USB 3.1 Gen 1) Type-A female
1 x DC jack
internal:
1 x SATA 6 Gb/s 22 pin receptacle
• Suitable for all 3.5? SATA HDDs up to 6 Gb/s
• Chipset: JMicron JMS578
• Data transfer rate:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• Supports UASP
• On / Off switch
• LED indicator for power and access
• Plastic housing
• Colour: black
• Dimensions (LxWxH): ca. 186 x 116 x 35 mm
• Hot Swap, Plug & Play
System requirements
• Linux Kernel 3.3 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-A port
Package content
• 3.5? external enclosure
• Cable USB Type-A male to Type-A male, length ca. 60 cm
• Power supply
• User manual
Power supply specification
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.8 A
• Output: 12 V / 2 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 11 mm
Package
• Retail Box
EAN: 4043619426126
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 6-8 business days
Condition: new
Comparison of Similar Products
VERBATIM 53106 - External 2.5'' SATA HDD/SSD enclosure, USB 3.0
18.01 EUR
- 2.5'-inch hard drive/SSD enclosure,
- Compatible with any conventional 2.5-inch SATA internal hard drive or SSD (up to 9.5-mm height),
- Tool-free mounting, plug and play, no drivers required,
- Cable strap for proper storage when the drive is not in use,
- LED operating status indicator,
- Supports USB SuperSpeed (5 Gb/s) for fast data transfer - USB 3.2 gen. 1 interface.
Turn your old internal hard drive or SSD into an external hard drive or SSD with one of Verbatim's enclosure kits.
The enclosure kits already contain everything you need to turn a standard 2.5'' SATA hard drive or SSD (up to 9.5 mm high) into your own external storage device with a USB 3.2 gen. 1 interface for data transfer with SuperSpeed. The enclosure kit also includes an LED indicator for drive activity, and a rubber cable strap for convenient storage of the cable when not in use.
Easy assembly: simply insert an internal SATA hard drive or SSD into the enclosure. You do not require any tools or special technical knowledge.
DELOCK 42011 - External 2.5'' SATA HDD/SSD enclosure, USB 3.0
25.62 EUR
This plastic enclosure by Delock can be used for the installation of a 2.5'' SATA hard drive or SSD. Despite the slim design, hard disks up to a height of 9.5 mm can be installed. The included USB Type Micro-B to USB Type-A cable allows the connection to a free USB Type-A female port.HDD / SSD installation without tools
The special feature of this enclosure is that no tools are required to install the HDD. The lid can be pushed backwards by a little pressure, the HDD will be attached to the SATA port and then the lid is reattached until it locks.
Specification
- Connectors:
external: 1 x SuperSpeed USB (USB 3.2 Gen 1) Type Micro-B female
internal: 1 x SATA 6 Gb/s 22 pin receptacle - Chipset: Asmedia ASM225CM
- Suitable for 2.5'' SATA HDD / SSD:
HDD height up to 9.5 mm
SATA HDD / SSD up to 6 Gb/s
HDD / SSD up to 4 TB
supports 5 V HDD / SSD - Data transfer rate up to 5 Gb/s
- LED indicator for power and access
- Supports S.M.A.R.T.
- Supports TRIM
- Hot Plug, Plug & Play
- Dimensions (LxWxH): ca. 128 x 79 x 15 mm
System requirements
- Chrome OS 90.0 or above
- Linux Kernel 5.8 or above
- Mac OS 11.4 or above
- Windows 8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Package content
- 2.5'' external enclosure
- Cable USB 3.0 Type-A to Type Micro-B, length ca. 50 cm
- User manual
Package
- Retail Box
DELOCK 42623 - External 3.5'' SATA HDD Enclosure, USB 3.0, stand
43.83 EUR
This plastic enclosure by Delock can be used for the installation of a 3.5? SATA hard drive. The included USB cables allow the connection to a free USB Type-A or USB-C™ port.Transparent enclosure with stand
The sturdy, transparent plastic housing provides a view inside to quickly see which memory is inside. A stand is supplied for vertical operation.
HDD installation without tools
The special feature of this enclosure is that no tools are required to install the HDD. The lid can be pushed backwards by a little pressure, the HDD will be attached to the SATA port and then the lid is reattached until it locks.
Specification
• Connectors:
external:
1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ female
1 x DC jack
internal:
1 x SATA 6 Gb/s 22 pin receptacle
• On / Off switch
• Suitable for 3.5? SATA HDD:
SATA HDD up to 6 Gb/s
HDD up to 10 TB
• Chipset: VIA VL716
• Data transfer rate:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• LED indicator for power and access
• Transparent plastic housing
• Dimensions (LxWxH): ca. 179 x 116 x 30 mm
• Hot Swap, Plug & Play
System requirements
• Chrome OS 75.0 or above
• Linux Kernel 3.3 or above
• Mac OS 10.14.6 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-C™ port or
• PC or laptop with a free USB Type-A port
Package content
• 3.5? external enclosure
• Cable USB-C™ male to USB-C™ male, length ca. 50 cm
• Cable USB-C™ male to USB Type-A male, length ca. 1 m
• Stand
• Power supply
• User manual
Power supply specification
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1 A
• Output: 12 V / 2 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.0 mm
outside: ø ca. 5.5 mm
length: ca. 10 mm
Package
• Retail Box
DELOCK 42617 - External Enclosure for 2.5'' SATA HDD / SSD with SuperSpeed USB 1
27.26 EUR
This plastic enclosure by Delock can be used for the installation of a 2.5'' SATA hard drive or SSD. Despite the slim design, hard disks up to a height of 9.5 mm can be installed.Full speed due to SuperSpeed USB 10 Gbps
Due to the VIA chipset, this hard disk enclosure supports SuperSpeed USB with up to 10 Gbps transfer speed. Thus, the full SATA 6 Gb/s transfer rate of the hard disk can be exploited.
Full connectivity due to USB Type-C™ port
The external enclosure is connected to a PC or laptop via a USB Type-C™ female port installed on the housing. The included USB Type-C™ to USB Type-A cable allows the connection to a free USB Type-A female port. Of course, the enclosure can also be connected via an optional USB Type-C™ cable to a free USB Type-C™ female port or a free Thunderbolt™ port.
Technical details
- Connectors:
external: 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™ female
internal: 1 x SATA 6 Gb/s 22 pin receptacle - Suitable for 2.5'' SATA HDD / SSD:
HDD height up to 9.5 mm
SATA HDD / SSD up to 6 Gb/s
supports 5 V HDD / SSD
HDD / SSD up to 4 TB - Chipset: VIA VL716
- Data transfer rate up to 6 Gb/s
- Supports UASP
- LED indicator for power and access
- Transparent plastic housing
- Dimensions (LxWxH): ca. 132 x 85 x 15 mm
- Hot Swap, Plug & Play
System requirements
- Linux Kernel 3.3 or above
- Windows 7/7-64/8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Package content
- 2.5'' external enclosure
- Cable USB-C™ male to USB Type-A male, length ca. 46 cm
- User manual
Package
- Retail Box
DELOCK 42618 - External Enclosure for 2.5'' SATA HDD / SSD with additional USB T
26.22 EUR
The aluminium enclosure by Delock enables the installation of a 2.5'' SATA HDD / SSD. Different USB devices can be connected to the USB Type-A and USB Type-C™ port. The SD slot could be used for reading and writing SD memory cards. The enclosure can be connected via USB cable to the PC or laptop.Sturdy housing with cooling fins
The sturdy metal housing has holes below the 2.5'' installation slot, which are located directly above the cooling fins when installed in the outer frame. This ensures optimum cooling of the enclosure and the built-in memory.
Additional power socket
The USB-C™ power socket is used for power supply to the devices and memory which are connected to the enclosure. The enclosure can also be operated without an additional power supply.
Technical details
- Connectors:
external:
1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ female >
1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ female
1 x USB 3.0 Type-A female
1 x SD slot
1 x USB Type-C™ female (power supply 5 V)
internal:
1 x SATA 6 Gb/s 22 pin receptacle - Chipset: JMicron JMS578, Genesys Logic GL3523, GL3224
- Data transfer rate up to 5 Gb/s
- Suitable for 2.5'' SATA HDD / SSD:
HDD height up to 9.5 mm
SATA HDD / SSD up to 6 Gb/s - 5 x LED indicator
- Metal housing
- Colour: black
- Dimensions (LxWxH): ca. 112 x 112 x 22 mm
- Hot Plug, Plug & Play
System requirements
- Android 8.0 or above
- Chrome OS 72.0 or above
- Linux Kernel 3.18 or above
- Mac OS 10.14.5 or above
- Windows 7/7-64/8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A or USB Type-C™ port
Package content
- External enclosure
- Cable USB-C™ male to USB Type-A male, length ca. 40 cm
- Cable USB-C™ male to USB-C™ male, length ca. 40 cm
- Screws
- Screwdriver
- 4 x rubber pad
- User manual
Package
- Retail Box
DELOCK 42610 - External Enclosure for 2.5'' SATA HDD / SSD with SuperSpeed USB 1
30.86 EUR
This aluminum enclosure by Delock can be used for the installation of a 2.5'' SATA hard drive or SSD. Despite the slim design, hard disks up to a height of 9.5 mm can be installed.Full speed due to SuperSpeed USB 10 Gbps
Due to the VIA chipset, this hard disk enclosure supports SuperSpeed USB with up to 10 Gbps transfer speed. Thus, the full SATA 6 Gb/s transfer rate of the hard disk can be exploited.
Full connectivity due to USB Type-C™ port
The external enclosure is connected to a PC or laptop via a USB Type-C™ female port installed on the housing. The included USB Type-C™ to USB Type-A cable allows the connection to a free USB Type-A female port. Of course, the enclosure can also be connected via an optional USB Type-C™ cable to a free USB Type-C™ female port or a free Thunderbolt™ port.
Technical details
- Connectors:
external: 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™ female
internal: 1 x SATA 6 Gb/s 22 pin receptacle - Suitable for 2.5'' SATA HDD / SSD:
HDD height up to 9.5 mm
SATA HDD / SSD up to 6 Gb/s
supports 5 V HDD / SSD
HDD / SSD up to 4 TB - Chipset: VIA VL716
- Data transfer rate up to 6 Gb/s
- Supports UASP
- LED indicator for power and access
- Robust aluminum housing
- Colour: black
- Dimensions (LxWxH): ca. 132 x 85 x 15 mm
- Hot Swap, Plug & Play
System requirements
- Linux Kernel 3.3 or above
- Windows 7/7-64/8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Package content
- 2.5'' external enclosure
- Cable USB-C™ male to USB Type-A male, length ca. 46 cm
- Screwdriver
- Foam spacer
- User manual
Package
- Retail Box
GRAUGEAR GG 18013 - External 2.5'' SATA HDD enclosure, USB 3.1
30.52 EUR
The G-2501-AC-10G makes a 2.5'' HDD/SSD appear simply elegant. The aluminium enclosure in a sandblasted look is also a little speedster, offering a transmission rate of up to 6 Gbit/s with its USB 3.2 Gen 2 USB-C connection.- External Type-C® aluminium enclosure for 2.5'' SATA III drives
- Aluminium enclosure with ultra-slim design
- Supports SATA III transfer rates of up to 6 Gbit/s
- Hard drive height up to 9.5 mm, unlimited capacity
- LED display for power and hard drive activity
- Supports Windows® and MacOS®
INTER-TECH IT88884122 - External 2.5-inch SATA HDD enclosure, USB 3.1
23.9 EUR
- USB 3.1 Gen2, speed up to 10 Gbit/s
- USB Type-C connection
- Premium aluminium enclosure
- Easy installation
The GD-25010 not only excels with its super-fast USB 3.1 Gen2 Type-C connection and data transfer rate of up to 10 Gbit/s, but also stands out thanks to its elegant aluminium enclosure with rounded corners and brushed surface.
The interior accommodates a 2.5-inch SSD, which can be easily installed in a matter of seconds using the supplied screwdriver.
LC POWER LC-35U3-BECRUXC1 - External 3.5'' SATA HDD enclosure, USB 3.2
35.74 EUR
Robust design and high storage capacityThanks to high-quality materials and workmanship, your data is optimally secured even under intense use. The sturdy enclosure protects against knocks and vibrations and ensures long life for your hard drives. By supporting large storage capacities, you can easily store huge amounts of data, ideal for backup solutions and media archives.
- USB 3.2 Gen 2x1 type C connection
- For a 8.89-cm/3.5'' SATA hard drive
- Up to 22 TB capacity
- SATA 6 GB/s chipset (SATA I/II/III)
- UASP support
- S.M.A.R.T pass-through support
- Plug and play
- All-aluminium body
Superbly fast with USB 3.2 Gen 2x1 and USB-C
Equipped with the latest USB-C interface (USB 3.2 Gen 2x1), you will experience a data transfer that is second to none. Whether it's huge media files or large backups, enjoy ultra-fast transfers that take your productivity to a new level. No waiting time, just pure speed and efficiency that will exceed your expectations.
Included in delivery:
- Enclosure, USB-C cable
- External power supply unit
- Base
- Mounting materials
- User manual
ICYBOX ICY IB-3640SU3 - 4x 3.5-inch SATA HDD enclosure, USB 3.0/eSATA
147.21 EUR
- Quiet operation thanks to temperature-controlled fans
- Energy-efficient thanks to synchronised standby mode
- Simple handling thanks to hard drive installation that does not require brackets
- Unlimited hard drive capacity
- Supports Windows XP, Vista, Windows 7 and Mac OS X
- Plug & play plus hot swap
All good things come in fours
External hard drives are all the rage right now. And rightly so, as they can be transported and connected to another device at any time. The ICY BOX 3640SU3 features plenty of storage with the ability to operate up to four hard drives of any size simultaneously. The robust aluminium housing not only looks stylish, it also efficiently dissipates the heat generated inside to the outside. A temperature-controlled fan provides added assistance in this, quietly ensuring air is exchanged correctly.
Hard drives are quick and easy to install in the IB-3640SU3 without the need for tools. Thanks to the hot swap functionality, the data carriers currently in use can be swapped out quickly at any time, even during operation. Consideration has also been given to protecting the environment:
ICYBOX ICY IB-223U3A-B - External 2.5-inch SATA HDD/SSD housing, USB 3.0, silicone
24.11 EUR
- External housing for 2.5-inch hard drives including silicone protective cover
- USB 3.0 host port - up to 5 Gbit/s with UASP support
- New chipset supports SATA III
- Tool-less hard drive installation
- LED for operation and hard drive activity
- Hard drive height up to 9.5 mm, unlimited capacity
- Compatible with Windows and Mac
- Plug & Play and Hot Swap
The meeting of style and technology
The style: Surface in a carbon look, protected by a slim silicone frame. The technology: USB 3.0 with UASP support for super-fast data transfer from and to the 2.5-inch SATA hard drive in the stylish housing.
Show me your plaids
The noble carbon look really adds something, turning the data catcher into an eye-catcher. Thanks to its unobtrusive look, the case blends perfectly into your workspace.
Silicone protective ring
The slim silicone frame provides for sturdy support and also absorbs damage from falls and thus provides additional protection for the hard drive.
ICYBOX ICY IB-200T-C3 - External 2.5'' SATA enclosure, USB 3.0
30.57 EUR
- 2.5'' SSD ENCLOSURE: Thanks to the combination cable, the enclosure has two connection options - USB Type-C and USB Type-A. You can use either of the USB connectors depending on which is compatible with the host computer
- HIGH COMPATIBILITY: Whether your computer runs on Windows, macOS or Chrome OS, the IB-200T-C3 automatically adapts to any operating system and always proves to be a reliable companion
- 100% TOOL-FREE: A hard disk installation or hard disk replacement is super fast and easy with IB-200T-C3 - slide the lid off, insert the drive, push the lid closed and you're done
- FOR 2.5'' SATA I/II/III: If your 2.5'' SATA I/II/III HDDs or SSDs do not exceed a maximum height of 9.5 mm, all these storage media can be accommodated in the IB-200T-C3 slot and can be used immediately
- USB 3.2 Gen 1: Guarantees smooth data transfer: Simply dock with the appropriate USB Type-C or Type-A connector and start work with data transmission at 5 Gbit/s
DELOCK 64098 - Docking and copy station 5x 2.5-inch SATA HDD/SSD, USB 3.0
125.3 EUR
This HDD/SSD docking station from Delock is used for the external connection of up to five 2.5-inch SATA HDDs/SSDs via the USB interface. It also facilitates the simple replacement of the drives by hot swap. This solution does not require an external housing, as the HDD/SSD is inserted directly into the docking station.Specifications
- Connections:
- 5 x SATA 6 Gb/s 22 -pin socket
- 1x USB 3.0 type-B socket
- 1x DC power socket
- Chipset: JMicron JMS578, JMB391
- Function keys:
- 1x clone button
- 1x mute button
- 1x on/off switch
- 1x mode switch
- Suitable for 2.5-inch SATA HDD/SSD
- Suitable for all SATA HDDs/SSDs up to SATA 6 Gb/s
- Data transfer rates up to:
- SuperSpeed 5 Gbps,
- Hi-Speed 480 Mbps,
- Full-speed 12 Mbps,
- Low-speed 1.5 Mbps
- 6 x LED indicator
- LED display for power, access and copy status
- Bootable
- Dimensions (LxWxH): approx. 169 x 125 x 37 mm
- Hot swap, plug & play
System requirements
- Linux Kernel 3.3 or higher
- Mac OS 10.14.6 or higher
- Windows 7/7 - 64/8.1/8.1 - 64/10/10 - 64
- PC or notebook with one free USB Type-A port
DELOCK 42603 - External Enclosure 5.25 Ultra Slim SATA Drives 9.5 mm, USB A
41.84 EUR
This enclosure by Delock is an external solution for different Ultra Slim SATA drives with 9.5 mm height, e.g. DVD-ROM, DVD±RW, Blu-ray etc. Thus the built-in drive will be converted into a mobile drive. For the installation of the drive, no tools are needed. The enclosure is connected to the computer or laptop via the USB Type-A plug.Specification
- Connectors:
external:
1 x USB 3.0 Type-A male
internal:
1 x Slim SATA 13 pin receptacle - Chipset: Initio INIC-3619
- For Ultra Slim SATA drives with 9.5 mm height
- Supports DVD±RW, DVD-ROM, CD-RW, CD-ROM, Blu-ray
- Hot Swap, Plug & Play
- No external power supply needed
- Housing material: plastic
- Colour: black
- Cable length: ca. 20 cm
- Dimensions (LxWxH): ca. 147 x 143 x 16 mm
System requirements
- Linux Kernel 2.6.38 or above
- Mac OS 10.9.5 or above
- Windows 7/7-64/8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Package content
- External enclosure
- Universal front panel
- User manual
Package
- Retail Box
ICYBOX ICY IB-233U3-B - External 2.5'' SATA HDD housing, USB 3.0
22.87 EUR
Black always fitsThe IB-233U3-B presents itself with an elegant black 2.5'' housing surrounded by a suitable silicone jacket. The internal values are not like their outer values: USB 3.0 with UASP support make data transfer fast and connection easy.
- External housing for 2.5'' hard disks including silicone protective cover
- USB 3.0 host port up to 5 Gbit/s with UASP support
- New chipset supports SATA III.
- Tool-less hard drive installation
- Power and hard drive activity LED
- Hard disk height up to 9.5 mm, capacity unlimited
- Windows & Mac compatible
- Plug & Play and Hot Swap
When high-quality plastic and aluminum are joined together, the best of both worlds have been combined. The special lightness of the plastic and the good thermal conductivity of the aluminum ensure that the functionality of the housing is not lost in all the esthetics. The lightweight material makes the IB-233U3-B an ideal companion for traveling. In order to keep it well protected there, a silicone coat is used, which can prevent fall damage, for example. The high data transfer rate of up to 5 Gbit/s by USB 3.0 with UASP ensures the necessary speed if it is to be faster. The circular LED continuously informs whether there is a power connection or whether the hard disk access is guaranteed. Hot swap and plug and play enable the user to seamlessly start up the replaced hard disk.
STARTECH.COM ST S251BRU33 - External 2.5'' SATA HDD/SSD housing, USB 3.0 micro B.
60.55 EUR
Be safe with mobile hard drive protection- Protect your data even in the toughest outdoor conditions
- Military-standard drive housing (MIL-STD-810G) provides excellent shock protection
- Excellent water and dust resistance with IP-54 rating
- No tools required to install or replace the hard drive
- High speed USB 3.0 with UASP and SATA III (Gbit/s)
This rugged drive enclosure sets new standards for data protection on the go. The military-standard design protects your sensitive data from difficult outdoor conditions. The robust water, dust and impact resistant housing also prepares you for unexpected challenges.
Industry-recognized protection against water and dust, with IP54 rating
Protect your data even in sudden rain or sand storms. The robust IP54 rated housing offers excellent water and dust resistance.
Drop test from 4 meters
The rugged drive case is wrapped in a silicone case and is designed to protect your drive from accidental and unexpected shocks, vibrations, and crashes. It complies with the military standard MIL-STD-810G and has passed drop tests from a height of 4 meters. A solid-state drive was installed in the chassis during the drop test.
Data protection inside and outside
The rugged drive enclosure supports reliable data protection inside and outside, wherever you are. The robust outer case provides shock resistance, while the flexible silicone case wraps around the outer skin to provide additional protection and mitigate accidental impacts, rough handling of luggage or falls. Inside, an additional layer of silicone provides additional drive stability.
Easy drive installation thanks to tool-less design
It's easy to turn a 2.5-inch SATA III (6-Gbps) solid-state drive or hard drive into external storage. Simply remove the silicone case, open the latch to insert the 2.5-inch drive into the rugged case, and insert the supplied USB cable into the USB port on the computer or hub. Neither screws nor tools are required.
70% faster than conventional USB 3.0, with UASP
Save time on the go by saving and transferring faster. Thanks to UASP (USB attached SCSI Protocol), this robust drive housing, combined with a UASP-enabled host controller, offers 70% higher read speed and 40% higher write speed than a conventional USB 3.0.
UASP is supported in Windows 8, Max OSX (10.8 or higher) and Linux for testing, UASP shows a 70% higher read speed and 40% higher write speed at maximum performance compared to a conventional USB 3.0.
With the same peak performance in the test, UASP also shows a 80% reduction in the required processor resources.
Test results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com-Gehäuses, and a SATA III solid-state drive (6 Gbps).
ICYBOX ICY IB-256WP - External 2.5'' SATA enclosure, USB 3.0, write protection, black
29.54 EUR
- USB 3.0 host port up to 5 Gbit/s
- Aluminium enclosure with silicone protective cover
- Compatible with SATA III 6 Gbit/s and USB 3.0 UASP
- LED display for operation and hard drive activity
- Hard drive height of up to 15 mm, unlimited capacity
- Supports: PC & Mac
- USB 3.0 micro-B on the enclosure and USB 3.0 Type-A to PC
- Write protection switch - prevents data loss/virus infection
Always protected
The write protection switch on the rear of the drive is a new feature that prevents the accidental deletion of data. It works in a similar way to the write protection switch on an SD card. Another important advantage of this kind of write protection is that the contents of drives secured in this way can no longer be manipulated by software vulnerabilities. The user has complete control over when the data can be changed by the host computer. Using the IB-256WP, you don't have to worry about the security of your data any longer.
ICYBOX ICY IB-RD3620SU3 - External 2 x 3.5-inch SATA enclosure, USB 3.0
102.87 EUR
- Aluminium enclosure for 2 x 3.5-inch (8.9 cm) SATA hard disks
- USB 3.0 up to 5 Gbps, backwards compatible with USB 2.0/1.1.
- eSATA up to 3 Gbps
- RAID level: RAID 0, 1, JBOD (spanning/single)
- Quiet - temperature-controlled fan
- Hot swap and Plug & Play
A good team
This data juggler houses two 3.5-inch HDDs and connects to the terminal, whether it is a laptop or a desktop PC, via either a USB 3.0 or eSATA cable. You can create disk arrays using RAID modes 0 and 1 and JBOD.
Easy to replace
The hard disks can be installed and removed quickly without tools. This process is supported by hot swap and Plug and Play, which mean no driver installations are required.
Hear a pin drop
The IB-RD3620SU3 is so quiet due to the passive heat dissipation of the high-quality aluminium. The function is supported by a temperature-controlled fan, which can also be manually set to one of three speed levels.
ICYBOX ICY RD3621-C31 - External 2x 2.5''/3.5'' SATA enclosure, USB 3.1
101.53 EUR
- External dual RAID system for 2x 2.5'' or 3.5'' SATA drives
- USB 3.1 (Gen 2) host port with up to 10 Gbit/s
- Supported RAID level: RAID 0, 1, SINGLE, LARGE
- LED display shows system status and HDD faults
- Supports SATA III with up to 6 Gbit/s and UASP
- Automatic recovery
- The active 60-mm fan keeps it cool during operation
- Plug & Play and HotSwap
- LED to show operation, hard drive in use, access and faults
- Supports Windows® and macOS®
An RAID for every application
Using two hard drives in an RAID network offers a whole host of benefits, making this a popular, widely used solution as a result. However, anyone wanting to capitalise on these benefits often has to check the system. That's because not every motherboard is equipped with an RAID controller and laptops cannot normally be used per se. The ICY BOX IB-RD3621-C31 offers a solution to this problem, effectively converting two 2.5'' or 3.5'' SATA hard drives into a high-performance RAID network.
ICYBOX ICY IB-241WP - External 2.5'' SATA enclosure, USB 3.0, write protection, alumini
24.41 EUR
- USB 3.0 host port up to 5 Gbit/s
- Compact aluminium enclosure
- Compatible with SATA III 6 Gbit/s and USB 3.0 UASP
- LED display for operation and hard drive activity
- Hard drive height of up to 9.5 mm, unlimited capacity
- Supports: PC & Mac
- Plug & Play and Hot Swap
- Connections: USB 3.0 micro-B on the enclosure and USB 3.0 Type-A to PC
- Write protection switch - prevents data loss/virus infection
Protects against data loss and tampering!
The write protection switch on the rear of the drive is a new feature that prevents the accidental deletion of data. It works in a similar way to the write protection switch on an SD card.
Another important advantage of this kind of write protection is that the contents of drives secured in this way can no longer be manipulated by software vulnerabilities. The user has complete control over when the data can be changed by the host computer. Using the IB-241WP, you don't have to worry about the security of your data any longer.
DELOCK 42007 - External Enclosure SuperSpeed USB for M.2 SATA SSD Key B
31.97 EUR
The aluminium enclosure by Delock enables the installation of a M.2 SSD in 2280, 2260, 2242 and 2230 format, which can be connected via USB to the PC or laptop.• Connectors:
external: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) Type Micro-B female
internal: 1 x 67 pin M.2 key B slot
• Chipset: Asmedia ASM235CM
• Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key B based on
SATA
• Maximum height of the components on the module: 1.35 mm, application of double-
sided assembled modules supported
• Data transfer rate up to 6 Gbps
• LED indicator for power and access
• Dimensions (LxWxH): ca. 98 x 39 x 9 mm
• Hot Plug, Plug & Play
System requirements
• Chrome OS
• Linux Kernel 5.8 or above
• Mac OS 11.2.3 or above
• Windows 8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-A port
Package content
• External enclosure M.2
• Screwdriver, screws
• Cable USB 3.2 Type-A to Type Micro-B, length ca. 20 cm
• User manual
Package
• Retail Box
DELOCK 42638 - External USB Combo Enclosure for M.2 NVMe or SATA
56.64 EUR
This enclosure by Delock enables the installation of an M.2 PCIe NVMe SSD or SATA M.2 SSD in 2280, 2260 and 2242 format. It can be connected via USB to the PC or laptop. The robust metal housing with cooling fins ensures an optimum temperature of the memory.Combo enclosure
The big advantage of this Delock M.2 enclosure is that both SATA and PCIe (NVMe) M.2 SSDs can be inserted into the enclosure. The memory is automatically recognized by the chipset and can then be used.
SSD installation without tools
The special feature of this enclosure is that no tools are required to install the M.2 SSD. The lid is pushed backwards and the SSD is plugged into the slot, pressed down until it locks into place at the corresponding snap nose. Then the lid is reattached until it locks.
• Connectors:
external: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ female
internal: 1 x 67 pin M.2 key M slot
• Chipset: Realtek RTL9210B
• Supports M.2 modules in format 2280, 2260 and 2242 with key B or key B+M based
on SATA or PCIe (NVMe)
• Maximum height of the components on the module: 1.5 mm, application of double-
sided assembled modules supported
• Supports NVM Express (NVMe)
• Bootable
• Data transfer rate up to 10 Gbps
• LED indicator for power and access
• Metal housing
• Dimensions (LxWxH): ca. 117 x 40 x 13 mm
• Hot Plug, Plug & Play
System requirements
• Android 9.0 or above
• Chrome OS 78.0 or above
• Linux Kernel 4.6.4 or above
• Mac OS 10.15.3 or above
• Windows 8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-C™ port
• PC or laptop with a free Thunderbolt™ 3 port
Package content
• External enclosure M.2
• Cable USB-C™ male to USB-C™ male, length ca. 30 cm
• Cable USB-C™ male to USB Type-A male, length ca. 30 cm
• 2 x thermal conductive pad
• 1 x thermal conductive plate
• User manual
Package
• Retail Box
DELOCK 64089 - Dockingstation 2.5''/ 3.5'' SATA HDD, USB 3.1
52.74 EUR
This Docking Station by Delock enables an external connection of one 2.5? or 3.5? SATA HDD or SSD through the USB-C™ interface. This solution does not require an external enclosure since the drive can just plug in directly into the docking station. The included USB cables allow the connection to a free USB Type-A or USB-C™ port.Transparent enclosure
The sturdy, transparent plastic housing provides a view inside.
Specification
• Connectors:
1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ female
1 x SATA 6 Gb/s 22 pin receptacle
1 x DC jack
• Chipset: VIA VL716
• On / Off switch
• For 2.5? and 3.5? SATA HDD / SSD
• Suitable for all SATA HDDs up to SATA 6 Gb/s
• Data transfer rate up to 6 Gb/s
• LED indicator for power and access
• Transparent plastic housing
• Dimensions (LxWxH): ca. 142 x 75 x 58 mm
• Plug & Play
System requirements
• Chrome OS 74.0 or above
• Linux Kernel 3.3 or above
• Mac OS 10.14.5 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-C™ port or
• PC or laptop with a free USB Type-A port
Package content
• Docking station
• Cable USB-C™ male to USB-C™ male, length ca. 50 cm
• Cable USB-C™ male to USB Type-A male, length ca. 1 m
• External power supply 12 V / 2 A
• User manual
Power supply specification
• Wall power supply
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1 A
• Output: 12 V / 2 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 10 mm
Package
• Retail Box
AXAGON AXG EE35-GTR - External 3.5'' SATA HDD enclosure, USB 3.0
39.87 EUR
Ribbed aluminium USB 3.2 Gen 1 SATA 6G external box for 3.5'' HDD.- Input: USB 3.2 Gen 1
- Output: SATA, UASP
- PC connection: USB-A -> USB-C adapter, USB-C <-> USB-A, switchable cable, 80 cm cable
- Device support: 3.5'' HDD
- Power supply: from the power supply unit
- Design: Metal enclosure
Ribbed external AXAGON EE35-GTR RIBBED aluminium box with USB 3.2 Gen 1 (USB 3.0) interface is designed for 3.5'' SATA hard drives. The double-sided USB-C connector on the box, together with the supplied USB-C -> USB-A cable and USB-A -> USB-C adapter provides a reliable connection to a computer.
You can enjoy the speed of modern SSD hard drives thanks to the SATA 6G interface with UASP support. Read S.M.A.R.T. information that monitors the condition of the external hard drive. Supports putting the attached hard drives and docking station into sleep mode.
DELOCK 42006 - External mSATA SSD Enclosure, USB 3.0
43.46 EUR
The aluminium enclosure by Delock enables the installation of an mSATA SSD, which can be connected via USB to the PC or laptop.Specification
- Connectors:
external: 1 x SuperSpeed USB (USB 3.2 Gen 1) Type Micro-B female
internal: 1 x mSATA 6 Gb/s slot (full size) - Chipset: Asmedia ASM225CM
- Data transfer rate up to 5 Gbps
- For 3.3 V mSATA module
- LED indicator for power and access
- Colour: black
- Dimensions (LxWxH): ca. 67 x 39 x 9 mm
- Hot Plug, Plug & Play
System requirements
- Chrome OS
- Linux Kernel 5.8 or above
- Mac OS 11.2.3 or above
- Windows 8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-A port
Package content
- External enclosure mSATA
- Screwdriver, screws
- Cable USB 3.0 Type-A to Type Micro-B, length ca. 20 cm
- User manual
Package
- Retail Box
INTER-TECH IT88884056 - External HDD SATA enclosure, USB 3.0
20.18 EUR
The GD-25612 is equipped as standard with a high-speed USB 3.0 port and ensures a data transfer rate of up to 5 Gbit/s. Fast and secure, state-of-the-art data transfer ensures complaints are a thing of the past.The housing is made from solid, brushed aluminium and thus offers both excellent protection from external influences and works as a visual highlight.
A case is included and provides additional protection for when you are out and about.
• Hard drive size: 2.5'' SATA I-II, max. 4TB, max. 9.5 mm height
• Max. data transfer rate: 5 Gbit/s
• Plug 'n' play
• Material: aluminium
• Dimensions (H/W/D): 78 x 13 x 132 mm
• LED indicators: micro LEDs for power and HDD activity
• Supported operating systems: Win 2000, XP, Vista, 7, 8, MAC OS 9.1 or higher, Linux 2.4.x
• Power supply: via USB port
• Warranty: 24 months
LOGILINK UA0389 - External M.2 NVMe & SATA HDD/SSD enclosure, USB 3.1, silver
30.57 EUR
- Suitable for M.2 SSD, PS5 and Xbox
- With USB 3.1 port for up to 10 Gbit/s data transfer
- High-grade aluminium enclosure
- Supports SSD up to 4 TB
- Specially for M Keys and M + B Keys (including sizes 22x30/22x42/22x60/22x80 mm)
- Plug and play - no driver installation required
- Supports Windows, Linux, Chrome OS and Mac OS
- Colour: silver
- Material: aluminium
- USB-C connection cable is included
Provides an easy way to connect an M.2 SSD to your laptop, PS5 and Xbox for ultra-fast data transfers, memory expansion, file backup, data recovery, system updates and disk cloning. Designed for M Keys or M+B Keys with sizes 22 x 30 mm, 22 x 42 mm, 22 x 60 mm and 22 x 80 mm.
LC POWER LC-25U3-HYDRA - External 2.5'' SATA HDD enclosure, USB 3.0
20.28 EUR
- USB 3.0, backwards compatible with USB 2.0/1.1
- For a 2.5'' SATA hard drive/SSD
- Capacity up to 3 TB
- Supports SATA I, II and III up to 6 Gbit/s
- Plug'n'Play
- Aluminium body
High-quality external enclosure for 6.35-cm/2.5'' SATA hard drives with aluminium body for excellent heat dissipation. Stylish, modern design and USB 3.0 port for maximum data transfer speeds.
Technical data:
- Enclosure type: external USB 3.0 HDD enclosure
- USB port: USB 3.0 SuperSpeed
- HDD installation option: 6.35-cm/2.5'' SATA I/II/III hard drive up to 6Gb/s
- HDD height: 9.5 mm
- USB 3.0 transfer rate: up to 5 Gb/s
- Enclosure material: aluminium/plastic
- Enclosure dimensions (H x W x D): 12 x 78 x 132 mm
- Weight (retail): 0.157 kg
- Test mark: CE
- Enclosure colour: black
- Barcode: 4260070126017
- Manufacturer code: LC-25U3-Hydra
STARTECH.COM ST SDOCK2U33V - Dual Dockingstation 2.5''/ 3.5'' SATA HDD/SSD, USB 3.0
87.99 EUR
- access two 2.5/3.5” SATA hard drives (HDD) or solid state drives (SSD) simultaneously and hot swap drives in and out
- USB 3.0 with data transfer speeds of up to 5Gbps
- convenient top-loading design with independent drive doors
- Plug-and-play functionality
- easy to set up with no driver or software installation required
Use this SATA hard drive docking station to gain quick access to two of your 2.5'' or 3.5'' SATA III SSDs/HDDs
This dual-bay SATA HDD/SSD docking station lets you dock and swap drives from your desktop or laptop computer simultaneously, using a single USB port. It supports two 2.5/3.5” SATA hard drives or solid-state drives.
Transfer files quickly
The dual-bay docking station supports USB 3.0, also known as USB 3.1 Gen 1, providing fast data transfer speeds of up to 5Gbps. It also supports UASP, for enhanced performance.
Ideal for IT professionals, such as system administrators and technicians, the hard drive dock enables you to complete device-management tasks more efficiently, such as disk image duplication, data recovery, backing up and archiving hard drives, and transferring content between drives and devices. It also enhances your workflow, by providing quick access to your hard drives, with the ability to easily swap drives in and out as needed.
Easy drive access
Designed for easy drive access, the hard drive dock enhances your workflow, by providing quick access to two hard drives, with the ability to easily swap drives in and out as needed. The hard drive dock features a convenient top-loading design with independent drive doors that make it easy to add or remove drives.
Get up and running quickly
The dual-bay SATA HDD/SSD docking station is OS independent, with no drivers or software installation required, for easy setup.
LOGILINK UA0284 - Ext. USB 3.0 HDD CASE SATA 3.5er ALU, black
32.17 EUR
It is the perfect casing to protect your SATA hard drive.Features:
- Aluminum Design
- supports HDD Capacity up to 6TB
- compatible with Serial ATA Specification Revision 2.6
- connects to 3.5”(8.89cm) SATA 1.5G/3G/6G hard drive
- compatible with USB3.0 (5Gbps), USB2.0 (480Mbps) and 1.1 (12Mbps) specification
- compliant with USB Mass Storage Class, Bulk-Only Transport specification Revision 1.3
- included External Power Supply 12V, 2A
- supports Plug-and-Play and USB Hot Plug
- with Power ON/OFF
- supports Windows XP/7/8/10 and Mac OS
- Product Dimension: 203(L) x 115(W) x 30(H)mm
- Product Weight: 250g
ICYBOX ICY IB-AC703-U3 - External 2.5-inch HDD/SSD housing, USB 3.0, adapter
20.18 EUR
- Supports 2.5-inch SATA III 6 Gbit/s hard drives/SSDs
- USB 3.0 host port - 5 Gbit/s with UASP
- With hard-drive protection box
- Supports Windows and Mac
- Plug & Play and Hot Swap
Two birds with one box
The IB-AC703-U3 for a 2.5-inch SATA hard drive/SSD, SATA III consists of an adapter to USB 3.0 including power supply and a plastic housing. You can use both individually or together. Using USB 3.0 technology, the adapter can be connected directly to a USB 3.0-compatible computer, media player or similar device and can achieve transfer rates of up to 5 Gbit/s.
Fast data transfer
Up to 5 Gbit/s can be achieved with USB 3.0, making data transfer quick and reliable! The adapter is hot-swap and plug-and-play capable, enabling driverless start-up and fast replacement of the hard drive.
DELOCK 42605 - External Enclosure 5.25 Slot-in Slim SATA Drives 9.5/12.7 mm, US
46.77 EUR
This enclosure by Delock is an external solution for different Slot-in Slim SATA drives with 9.5 or 12.7 mm height, e.g. DVD-ROM, DVD±RW, Blu-ray etc. Thus the built-in drive will be converted into a mobile drive. The enclosure is connected to the computer or laptop via the USB Type-C™ plug.Specification
- Connectors:
external:
1 x SuperSpeed USB (USB 3.1 Gen 1) USB Type-C™ male
internal:
1 x Slim SATA 13 pin receptacle - Chipset: Initio INIC-3619
- For Slim SATA drives up to 12.7 mm height
- Supports DVD±RW, DVD-ROM, CD-RW, CD-ROM, Blu-ray
- Hot Swap, Plug & Play
- No external power supply needed
- Housing material: plastic
- Colour: silver / black
- Cable length: ca. 28 cm
- Dimensions (LxWxH): ca. 143 x 139 x 16 mm
System requirements
- Linux Kernel 2.6.38 or above
- Mac OS 10.9.5 or above
- Windows 7/7-64/8.1/8.1-64/10/10-64
- PC or laptop with a free USB Type-C™ port
Package content
- External enclosure
- User manual
- Package
- Retail Box
AXAGON AXG EEM2-SG2 - External M.2 SATA/NVMe SSD enclosure with USB 3.1
36.82 EUR
External USB-C 3.2 Gen 2 metal box for M.2 NVMe and SATA SSDs. Screwless. Silver.- Interface: USB 3.2 Gen 2
- Output: M.2 NVMe, M.2 SATA, UASP
- Transfer rate: up to 10 Gbit/s
- PC connection: reducer, USB type A-M, USB type C-M, switchable cable, 20 cm cable
- Device support: M.2 2242, M.2 2260, M.2 2280
- Design: Metal enclosure
- Extra: TRIM
The universal external AXAGON EEM2-SG2 RAW Box with USB 3.2 Gen 2 interface is designed for M.2 NVMe or SATA SSD hard drives. The double-sided USB-C port on the box provides a reliable connection. The package contains not only a USB-C -> USB-C cable for connecting the box to a computer, but also a USB-C -> USB-A adapter. You can connect the box to any available USB port on the notebook.
The second generation of the fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. Thanks to the fast USB 3.2 Gen 2 interface, the transmission speed is up to 10 Gbit/s.
AXAGON AXG EEM2-SB2 - External M.2 SATA/NVMe SSD enclosure with USB 3.1
38.79 EUR
External USB-C 3.2 Gen 2 metal box for M.2 NVMe and SATA SSDs. Screwless.- Interface: USB 3.2 Gen 2
- Output: M.2 NVMe, M.2 SATA, UASP
- Transfer rate: up to 10 Gbit/s
- PC connection: reducer, USB type A-M, USB type C-M, switchable cable, 20 cm cable
- Device support: M.2 2242, M.2 2260, M.2 2280
- Design: Metal enclosure
- Extra: TRIM
The universal external AXAGON EEM2-SB2 RAW Box with USB 3.2 Gen 2 interface is designed for NVMe M.2 SSD hard drives. The double-sided USB-C port on the box provides a reliable connection. The package contains not only a USB-C -> USB-C cable for connecting the box to a computer, but also a USB-C -> USB-A adapter. You can connect the box to any available USB port on the notebook.
The second generation of the fast USB interface allows you to enjoy the speed of modern M.2 SSD drives.
Thanks to the fast USB 3.2 Gen 2 interface, the transmission speed is up to 10 Gbit/s. The external M.2 box also supports other modern functions such as UASP, TRIM and allows reading of S.M.A.R.T. information.
ICYBOX ICY IB-AC603B-U3 - External 2.5-inch HDD/SSD housing, USB 3.0, adapter
24.37 EUR
- Simply connected: Connect your SATA III hard drives or SSDs to your PC or notebook via the widely used standard USB Type-A port and get quick and easy access to your data anywhere
- Well protected: The IB-AC603b-U3 adapter comes with a protection box and holds a 2.5'' hard disk. The box can be easily opened and closed with a click lock and protects the SSD from dust and shock
- Fast data transfer: Two advantages to note: USB 3.2 Gen 1 Type-A transfers your data at a convenient 5 Gbit/s and the hard drive receives power directly
- Plug and play: Plug it in and off you go! On Windows® and MacOS®, your computer detects the hard drive immediately and no additional driver is required
- Well informed: The integrated, round status LED keeps you informed: A steady blue light indicates that the memory is connected, a flashing light signals data access
ICYBOX ICY IB-AC703-C - Externes 2.5'' SATA HDD/SSD Gehäuse, USB 3.0, Adapter
20.18 EUR
- unterstützt 2,5'' SATA III 6 Gbit/s HDDs/SSDs
- USB 3.2 Gen 1 Type-C® Hostanschluss 5 Gbit/s mit UASP
- mit Festplattenschutzbox
- unterstützt Windows®, macOS®
- Plug & Play, HotSwap
Adapter für 1x HDD/SSD mit USB Type-C® Anschluss und Schutzhülle
Eine neue Verbindung
Bis zu 5 Gbit/s lassen sich mit USB 3.2 Gen 1 Type-C® erreichen. Damit wird die Datenübertragung schnell und zuverlässig und der neue Type-C® Stecker ist zusätzlich noch verdrehsicher! Der Adapter ist HotSwap- und Plug & Play-fähig, sodass eine treiberlose Inbetriebnahme sowie ein schneller Austausch der Festplatte ermöglicht werden.
Gut verpackt
Zusammen mit der passenden Schutzbox (HDD Höhe bis zu 9,5 mm) ist die Festplatte auch unterwegs gut gegen Erschütterungen und Staub geschützt. Der neue USB 3.2 Gen 1 Type-C® Anschluss ist kleiner als seine Vorgänger und wird dadurch die Zukunft der mobilen Datenübertragung mit hoher Geschwindigkeit.
Ein praktisches Duo
Den 2,5'' SATA zu USB 3.2 Gen 1 Type-C® Festplattenadapter kann man in Kombination mit der mitgelieferten Kunststoffschutzbox verwenden - oder beide getrennt voneinander. Vorteil des Adapters gegenüber externen Festplattengehäusen ist, dass man die Festplatte schnell wechseln kann, ohne Schrauben oder sonstiges Werkzeug verwenden zu müssen.
STARTECH.COM ST 25SAT35HDD - 2.5'' to 3.5'' SATA HDD Adapter Enclosure
39.72 EUR
Turn a 2.5'' SATA HDD/SSD into a 3.5'' SATA Drive-Supports 2.5'' SSD/HDD up to 12.5mm in height
-Standard 3.5'' HDD mounting points
-Support for SATA revision I/II/III (1.5/3.0/6.0 Gbps)
-Tool-less installation
The 25SAT35HDD 2.5'' to 3.5'' hard drive adapter enclosure turns a 2.5'' SATA hard drive (HDD) or solid state drive (SSD) into a 3.5'' drive.
The adapter enclosure lets you substitute a 3.5'' hard drive for a 2.5'' SSD/HDD in any application that would typically require a 3.5'' drive, such as desktop chassis, backplane, or docking station. The enclosure has the same dimensions as a standard 3.5'' hard drive, including mounting points, and SATA connector locations.
With support for drives up to 12.5mm in height, and high-capacity SATA I/II/III drives (tested up to 1TB) this HDD adapter ensures compatibility with virtually any 2.5'' SATA hard drive or solid state drive.
The 25SAT35HDD is backed by a StarTech.com 2-year warranty and free lifetime technical support.
LC POWER LC-25U3-C4 - External 2.5'' SATA HDD/SSD enclosure, USB 3.2
25.4 EUR
High-grade aluminium enclosureThe LC-25U3-C4 offers a robust and elegant aluminium enclosure for your 2.5'' SATA HDD or SSD. The material not only ensures durability, but also efficient heat dissipation. Tool-free installation allows quick and easy installation without additional accessories. Thanks to the LED display, you can always keep an eye on the operating status. A reliable enclosure for safe and stylish protection of your data.
- USB C port
- USB 3.2 Gen 1x1
- For one 2.5'' SATA HDD/SSD
- Aluminium alloy
- Tool-free assembly
- Supports the UASP protocol
- LED display
- Plug and play
USB-C and SuperSpeed up to 5 Gb/s
With USB 3.2 Gen 1x1 and support for the UASP protocol, the LC-25U3-C4 achieves transfer rates of up to 5 GB/s. This means faster data transfer and loading times. The USB-C interface provides up-to-date and versatile connectivity to modern devices. Plug and play eliminates the need for installing drivers - just plug it in and get started. Ideal for data protection, backup and quick access to external storage media.
DELOCK 42633 - external M.2 NVMe/SATA SSD Case USB 3.1 Type-C
57.91 EUR
This enclosure by Delock enables the installation of an M.2 PCIe NVMe SSD or SATA M.2 SSD in 2280, 2260, 2242 and 2230 format. It can be connected via USB to the PC or laptop. The robust metal housing ensures an optimum temperature of the memory.Combo enclosure
The big advantage of this Delock M.2 enclosure is that both SATA and PCIe (NVMe) M.2 SSDs can be inserted into the enclosure. The memory is automatically recognized by the chipset and can then be used.
SSD installation without tools
The special feature of this enclosure is that no tools are required to install the M.2 SSD. The lid can be pushed backwards by a little pressure, the SSD will be attached to the PCB with a rubber nipple and then the lid is reattached until it locks.
Specification
• Connectors:
external: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ female
internal: 1 x 67 pin M.2 key M slot
• Chipset: Realtek RTL9210B
• Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key M or key B+M
based on SATA or PCIe (NVMe)
• Maximum height of the components on the module: 1.5 mm, application of double-
sided assembled modules supported
• Supports NVM Express (NVMe)
• Bootable
• Data transfer rate up to 10 Gbps
• LED indicator for power and access
• Metal housing
• Dimensions (LxWxH): ca. 122 x 36 x 12 mm
• Hot Plug, Plug & Play
System requirements
• Android 9.0 or above
• Chrome OS 78.0 or above
• Linux Kernel 3.12 or above
• Mac OS 10.15.3 or above
• Windows 8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-C™ port
Package content
• External enclosure M.2
• Cable USB-C™ male to USB-C™ male, length ca. 30 cm
• User manual
Package
• Retail Box