CRC-KONTAKTCHEMIE KONTAKT 03101 - Marker paint, fluorescent red
20.28 EUR
Access the complete sheet with information, compare prices and identify the features of PRODUCTNAME, available at the price of PRICE CURRENCY; it inserts into the CATEGORY NAME; the product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
MARKER PAINT fluorescent red spray paint for temporary marking of all kinds. Good adhesion, even in cold or damp weather.
Fast drying and high opacity.
Does not run off even on vertical surfaces. With special protective cap and 360° spray valve. Ideal for marking in construction, during surveying work or in warehouses and logistics processes.
EAN: 5412386031014
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
MARKER PAINT fluorescent red spray paint for temporary marking of all kinds. Good adhesion, even in cold or damp weather.
Fast drying and high opacity.
Does not run off even on vertical surfaces. With special protective cap and 360° spray valve. Ideal for marking in construction, during surveying work or in warehouses and logistics processes.
EAN: 5412386031014
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
Graphite-based conductive paint. Acrylic resin lacquer with electrically conductive graphite powder for surface resistances between 1000 - 2000 ohm. It is a permanent conductive paint for protection against electrostatic charges and, like a lubricant varnish, is suitable as a dry lubricating coating on metals, plastics, glass and wood.
For EMC-protection of plastic enclosures, we recommend highly conductive copper lacquer EMC 35.
Can size: 400 ml
Graphite-based conductive paint. Acrylic resin lacquer with electrically conductive graphite powder for surface resistances between 1000 - 2000 ohm. It is a permanent conductive paint for protection against electrostatic charges and, like a lubricant varnish, is suitable as a dry lubricating coating on metals, plastics, glass and wood.
For EMC-protection of plastic enclosures, we recommend highly conductive copper lacquer EMC 35.
Can size: 200 ml
Oxide-removing contact cleaner — proven over more than 40 years. Contact 60 removes troubling corrosion layers and dirt from contact materials and eliminates contact resistances and voltage losses in plugs, switches, tuners etc.
For optimum cleaning, we recommend rinsing away loosened corrosion products with CONTACT WL spray wash. Contacts can then be protected from repeated corrosion permanently with CONTACT 61.
Can size: 200 ml
PCB flushing for electrical installations and equipment. CONTACT LS is a special cleaning fluid with high dissolving power for a wide range of dirt and is ideal for flushing out cabinets, equipment, transformer systems and motors quickly. CONTACT LS is highly compatible with electronic assemblies and evaporates quickly and without leaving a residue. The special pistol spray head allows for quick cleaning with high spraying pressure.
Can size: 500 ml
Water-based, powerful degreaser, NSF-approved
Water-based, pH-neutral universal degreaser. Quickly and safely removes grease, oil, lubricant, dirt and other stubborn contaminants from mechanical parts and surfaces. Safe, environmentally friendly alternative to solvent cleaners.
Features:
- Dirt can be flushed away quickly and easily.
- Food-safe/NSF-registered.
- Contains no harmful volatile organic compounds (VOC).
- Easily biodegradable formula (= 60% to OECD 301).
- Non-flammable.
The wipes come in a practical, resealable dispenser and contain a mild detergent to remove dirt effortlessly and effectively. The special fluid has an anti-static effect that reduces electrostatic attraction. SCREEN WIPES are ideal for cleaning LCD displays, TFT monitors, plasma screens and glass surfaces quickly and gently.
Characteristics
• Large wet wipes
• Mild cleaning fluid
• Anti-static effect
• Resealable dispenser
Advantages
• Soft and tear-resistant
• High material compatibility
• Long-lasting reduction of electrostatic attraction
• No drying out
Contents: 100 wipes
FLUID 101 is a dehydration spray for electronics. The special capillary-active fluid penetrates into the finest cracks and displaces water and moisture. It is therefore ideal for repairing electrical equipment after water damage or for quickly correcting faults caused by moisture.
Universal spray wash for entire electronics. The quick-action cleaner loosens oily, greasy or sticky dirt without leaving any residues. It is compatible with common materials in the electronics field.
Cleaning of electrical contacts, e.g. complementing CONTACT 60. Degreasing of bearings and metal surfaces in precision mechanics. Removal of pen or felt-tip pen markings on housing surfaces.
We recommend CONTACT NB as an incombustible safety cleaner.
Can size: 400 ml
The active foam has high dirt removing potency, is deeply penetrating, biodegradable, and does not run on vertical surfaces. Ideal for cleaning of glass, ceramic and plastic surfaces, machine parts, fittings, furniture and packaging.
Contains highly active agents for powerful yet gentle dirt removal. The cleaning foam is deeply penetrating and does not run even on vertical surfaces. It has universal application in production facilities, workshops, offices, around the home and for automotive, agricultural and construction machinery. It cleans quickly and without streaking on all glass, ceramic, metal and plastic surfaces. It is also very compatible with textiles, rubber and painted surfaces.
Can size: 400 ml
Highly effective gasket remover for gently loosening stubborn residues.
Features:
- Special formulation with strong solvent action
- Dissolves sealant, paint and adhesive residues
- Deep-acting
- Contains no acids or bases
Benefits:
- Quick and gentle cleaning without scratching the surface
- No runoff even on vertical surfaces
- Suitable for use on all types of metals
Universal spray wash for entire electronics. The quick-action cleaner loosens oily, greasy or sticky dirt without leaving any residues. It is compatible with common materials in the electronics field.
Cleaning of electrical contacts, e.g. complementing CONTACT 60. Degreasing of bearings and metal surfaces in precision mechanics. Removal of pen or felt-tip pen markings on housing surfaces.
We recommend CONTACT NB as an incombustible safety cleaner.
Can size: 100 ml
FAST DRY DEGREASER is the fast drying solvent-based parts cleaner. Due to its multi-component formula, the quick cleaner and degreaser has a high dissolving power for dirt of all kinds and is ideally suited for cleaning mechanical components. After application, it dries quickly and residue-free. Due to its high degreasing effect, it is particularly recommended for cleaning metal surfaces before gluing or painting. The spray is equipped with a comfortable pistol spray head and a 360° valve.
After cleaning, a uniformly shiny surface remains. A wafer-thin, water-resistant protective film produces a long-lasting sheen.
INOX KLEEN is registered for use in the food industry in accordance with NSF A7/C1.
Aqueous test liquid for gas and compressed air systems of all kinds. Forms highly visible foam bubbles at the gas leak. DVGW certified, complies with the requirements of DIN EN 14291. According to NSF P1 registered for use in food technology. Biodegradability according to OECD 301 B: 31%.
The new generation of screen cleaner!
Gentle special cleaner for TFT screens and LCD displays. Foam cleaner without solvents such as alcohol, benzene or ammonia, therefore particularly suitable for TFT screens and housings of PC screens, laptops, mobile phones, personal digital assistants, though also for touch screens, CDs, scanners, copiers etc. The active foam does not run even on vertical surfaces.
Can size: 100 ml
Special cleaner for magnetic and tape heads. Mild and material compatible, removes tape abrasion, dust or oil from video recorders, tape recorders or players, cassette recorders, projectors or floppy disc drives. VIDEO 90 cleans magnetic heads and ensures clear images and a pure sound.
Can size: 200 ml
Active foam for cleaning glass and plastic surfaces. The foam does not run even on vertical glass surfaces keeping the dirt in place. It eliminates smudging of screens, mirrors, copiers, enclosures — effectively and without streaks.
!!! Caution: Not suitable for TFTs and laptops
Can size: 400 ml
Safe degreaser for brake parts
Properties:
- Quickly and safely removes brake fluid, grease, oil, hardened deposits and other contaminants from brake and clutch parts.
- Free from volatile organic compounds (VOC).
- Just as efficient as conventional hydrocarbon solvents.
Advantages:
- Non-flammable.
- 360° spray valve.
- Easy to rinse with water.
SURFACE 95 is a enclosure and surface cleaner with a polishing effect. It removes all kinds of dirt and smooths out scratches and signs of wear on plastic and paint surfaces. The polishing effect creates a new shimmer. The antistatic effect reduces the subsequent attraction of dust and dirt. SURFACE 95 is ideally suited for cleaning and touching up electronic enclosures, fittings and office equipment.
Can size: 200 ml
Highly effective, powerful cleaner and degreaser for metals or electric motors. Deep cleaning power with longer exposure time. Also dissolves resinified soiling reliably and without residue.
For delicate components we recommend mild precision cleaner CLEANER 601 or spray wash CONTACT WL.
Can size: 400 ml
- Highly effective against: Greases, oils, lubricants, tar, adhesives and much more
- NSF approved (A8 and K1)
- leaves no residue
- non-conductive, non-corrosive and does not stain the surface
- acetone and silicone-free
- low odor: no harmful volatile organic compounds (VOCs)
- 95% active product (maximum product quality, minimum gas content)
Water-based brake cleaner
Properties:
- Quickly and safely removes brake and transmission fluid, grease, oil, hardened deposits and other dirt from brake and clutch parts.
- Water-based.
- Alternative to conventional hydrocarbon solvents.
- Reduces noise formation on disc brakes.
Advantages:
- Safe for all materials in the vicinity of brake parts, such as rubber, plastics or sensors.
- Non-flammable.
Universal spray wash for entire electronics. The quick-action cleaner loosens oily, greasy or sticky dirt without leaving any residues. It is compatible with common materials in the electronics field.
Cleaning of electrical contacts, e.g. complementing CONTACT 60. Degreasing of bearings and metal surfaces in precision mechanics. Removal of pen or felt-tip pen markings on housing surfaces.
We recommend CONTACT NB as an incombustible safety cleaner.
Can size: 200 ml
Dust Clean PB is an economical compressed air cleaner with an easy-to-use spray head. The high spray pressure effectively blows dust and dirt out of office equipment and computers. The pressurised gas, which is liquefied in the spray can, leaves no residue. The spray can is equipped with a convenient, user-friendly spray head and an attachable spray pipe for precise cleaning.
Example applications:
- Computers and keyboards
- Printers and copiers
- Projectors and cameras
- Telephone
CONTACT 60 PLUS — contact cleaner plus protection. The oxide-removing contact cleaner in combination with a high-quality lubricating and protecting oil ensures long-lasting, trouble-free operation of electrical devices. It removes even the most stubborn dirt and oxide layers and eliminates disruptive contact resistances. It reduces insertion force and protects against moisture and corrosion. Ideal for connectors, switches, controllers etc. in particular those exposed to the elements. NSF K2 registered for use in the food industry.
Can size: 200 ml
Precision cleaner for contacts. A mild cleaner for light dirt in potentiometers, sliders etc. It is particularly suitable for delicate components in the entertainments electronics, computing or telecommunications fields owing to its material compatibility.
• Cleaner for precision instruments and high-frequency components
• Evaporates without leaving any residue
• Ensures maximum operational reliability
For higher levels of dirt we recommend CONTACT WL, for oxidized contacts tried-and-tested CONTACT 60.
Can size: 200 ml
Incombustible pressurised gas for any spray posture, with DEKRA-approved safety for hard-to-reach areas. No risk of ignition or explosion under normal conditions of use. Sprays oil-free and clean compressed air regardless of position. Dust removal in hard-to-reach places too is not a problem.
For applications under voltage or in explosion-protected areas, we recommend COMPRESSED AIR 360 SUPER.
Can size: 200 ml
High-quality due to particularly fine copper powder and drip-free base grease.
Contains anti-corrosion additives, water-resistant and separating effect up to 1100°C. Applications include as screw paste, separating paste for connections and as brake pad paste.
The refined fine oil:
- loosens rusted screws
- lubricates mechanics
- protects metals from rust and displaces moisture from connectors
5-56 PRO CLEVER STRAW is silicone-free, does not resinify and can be used between -50°C and +150°C.
The handy CLEVER-STRAW special spray head with folding spray tube enables a variable spray pattern for area or precise dosage.
Evapo-Rust® is a non-toxic rust remover for fast and effective restoration.
The award-winning formula has been specially developed for rust removal without scrubbing or sanding. It is safe, straightforward and easy to use.
The solution does not need to be mixed, it is ready to use.
Product features
- Non-toxic, non-caustic and non-corrosive
- Efficient high-performance formula for even the most stubborn rust
- Reusable with long-lasting effectiveness
- No fumes or bad odors, non-flammable, VOC free
- Does not attack non-oxidized steel, safe on other metals
- Does not attack plastic, PVC, Viton and non-oxidized paints
Application examples
Automotive parts, hardware, rusty tools, restoration, metalworking, manufacturing and machinery, equipment and much more
Can size: 200 ml
Evapo-Rust® is a non-toxic rust remover for fast and effective restoration.
The award-winning formula has been specially developed for rust removal without scrubbing or sanding. It is safe, straightforward and easy to use.
The solution does not need to be mixed, it is ready to use.
Product features
- Non-toxic, non-caustic and non-corrosive
- Efficient high-performance formula for even the most stubborn rust
- Reusable with long-lasting effectiveness
- No fumes or bad odors, non-flammable, VOC free
- Does not attack non-oxidized steel, safe on other metals
- Does not attack plastic, PVC, Viton and non-oxidized paints
Application examples
Automotive parts, hardware, rusty tools, restoration, metalworking, manufacturing and machinery, equipment and much more
Label remover for paper labels. The solvent based on natural orange terpenes permeates the label paper and dissolves the underlying adhesive. Most labels can be pulled off after just 2 to 4 minutes of exposure time. The long duration of action guarantees effective working even in series application.
Solvent 50 removes labels from metal, glass, cardboard and many plastics. But is not recommended on solvent-sensitive plastics such as Plexiglas or CD cases.
Can size: 100 ml
High-quality due to particularly fine copper powder and drip-free base grease.
Contains anti-corrosion additives, water-resistant and separating effect up to 1100°C. Applications include as screw paste, separating paste for connections and as brake pad paste.
The new high-quality, pure liquid gas for mobile gas soldering irons. The high purity solder gas has a high calorific value and leaves no residue. The pressurised gas container has a high yield and is equipped with a universal valve for filling all types of gas soldering iron:
- For mobile gas soldering irons
- Pure LPG
- High calorific value
- Residue-free
- High yield
- Universal valve
BUTANE REF is designed to refill gas soldering irons for mobile use. With a capacity of 200 ml, the spray can is very high yield and ensures the gas soldering iron is always ready for use. The can is equipped with a universal valve for filling gas soldering irons
of all types, meaning no other adapters are required for normal applications. Also suitable for filling LPG lighters.
High-purity isopropyl alcohol for universal cleaning. The spray method of this traditional cleaning agent allows for better handling: precise dosing, clean storage, higher levels of safety. The high purity of the alcohol ensures residue-free cleaning in the areas of electronics, precision mechanics and optics.
E.g. for cleaning video and audio heads, drives, rubber rollers, optical glasses etc.
Can size: 200 ml
Oxide-removing contact cleaner — proven over more than 40 years. Contact 60 removes troubling corrosion layers and dirt from contact materials and eliminates contact resistances and voltage losses in plugs, switches, tuners etc.
For optimum cleaning, we recommend rinsing away loosened corrosion products with CONTACT WL spray wash. Contacts can then be protected from repeated corrosion permanently with CONTACT 61.
Can size: 400 ml
The KP2 K-18 multi-purpose grease is free from resin, silicone and acid and is temperature resistant up to 120°C.
It penetrates into the lubrication point and forms a strong, water-resistant lubricating film that protects against moisture and corrosion.
The PTFE additive increases the compressive strength.
WHITE LITHIUM GREASE is used for the lubrication of joints, hinges and sliding guides, especially in hard-to-reach places.
