JOY-IT DEBO POE ADAPT 2 - Developer Boards - POE USB-C Power Adapter
19.36 EUR
Consult the informative sheet with in-depth details, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; falls into the CATEGORY NAME; the product is marketed by SELLER NAME and produced by MANUFACTURER NAME.
"With this adapter you can power your Raspberry Pi and other single board computers, which are powered by a USB-C port, via POE LAN.
The adapter is connected directly to a POE-capable router/switch or POE injector with a POE LAN cable (up to 100 meters cable length).
This allows you to use the Raspberry very flexibly and no power outlet and power supply is required.
EAN: 4250236821795
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
"With this adapter you can power your Raspberry Pi and other single board computers, which are powered by a USB-C port, via POE LAN.
The adapter is connected directly to a POE-capable router/switch or POE injector with a POE LAN cable (up to 100 meters cable length).
This allows you to use the Raspberry very flexibly and no power outlet and power supply is required.
- Connections: 1x USB-C plug, 1x RJ45 jack, 1 x RJ45 plug
- Input voltage: 36 - 57 V (standard PoE voltage 48 V, 52 V)
- Output voltage: DC 5 V
- Output current: 2 A
- Transmission distance: 10 - 100 m
- PoE Protocol: IEEE802.3af
- Network bandwidth: 10/100 Mbps
- Operating temperature: -50 to +75°C
- Dimensions: 82 x 28 x 23 mm
EAN: 4250236821795
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
JOY-IT DEBO USB-PD 1 - Developer Boards - USB-PD Trigger Module, USB-C to Terminal Bloc
20.8 EUR
With this small module you can trigger USB-PD protocols and thus charge your laptop via a PD-capable USB-C power supply, for example. The output voltage is adjustable in 5 steps (5 V, 9 V, 12 V, 15 V and 20 V) via the button integrated on the module. The currently selected voltage can be read from the color of the RGB LED integrated on the module (red = 5 V / yellow = 9 V / green = 12 V / light blue = 15 V / dark blue = 20 V / purple = highest possible voltage). Due to its output interfaces, the module can be used flexibly and is easy to integrate.Technical details• input voltage up to 20 V / 100 W (via a PD-capable USB-C power supply unit)
• input interface: USB-C
• Output voltage: 5/9/12/15/20 V (adjustable via knob)
• Output current: max. 5 A
• output power: max. 100 W
• Output interface: screw terminal block
• dimensions (LxWxH): 31.5 x 15 x 14 mm
Note• USB-C power supply not included in delivery
JOY-IT DEBO USB-PD 2 - Developer Boards - USB-PD Trigger Module, USB-C to USB-A
20.8 EUR
With this small module you can trigger USB-PD protocols and thus charge your laptop via a PD-capable USB-C power supply, for example. The output voltage is adjustable in 5 steps (5 V, 9 V, 12 V, 15 V and 20 V) via the button integrated on the module. The currently selected voltage can be read from the color of the RGB LED integrated on the module (red = 5 V / yellow = 9 V / green = 12 V / light blue = 15 V / dark blue = 20 V / purple = highest possible voltage). Due to its output interfaces, the module can be used flexibly and is easy to integrate.Technical details• input voltage up to 20 V / 100 W (via a PD-capable USB-C power supply unit)
• input interface: USB-C
• Output voltage: 5/9/12/15/20 V (adjustable via knob)
• Output current: max. 5 A
• output power: max. 100 W
• Output interface: USB-A
• Dimensions (LxWxH): 31.5 x 15 x 14 mm
Note• USB-C power supply not included in delivery
ADAFRUIT DEBO MEMS MIC - Developer Boards - Microphones, SPH0645
19.61 EUR
Breakout board with I2S MEMS microphones- Digital output
- 50 Hz to 15 kHz
- I2S Interface
- • 1,6 ... 3,6 V Operating voltage
- SPH0645LM4H
SOLDERED DEBO RTC - Developer boards - Real-time clock - RTC, PCF85063A
16.31 EUR
"The RTC (Real Time Clock) is a device that tracks time and date accurately and precisely. Due to its high precision, it is better suited for long-term time tracking than the clocks on microcontrollers.- compatible with Arduino (or a compatible board such as Dasduino)
- extremely low power consumption
- integrated battery holder
- alarm function and interrupt pin
- uninterrupted time tracking even in the event of a power failure
The RTC (Real Time Clock) is characterized by its high accuracy, which makes it particularly suitable for applications where long-term time tracking is required. It is compatible with Arduino (or a compatible board such as Dasduino) and can be operated with extremely low power consumption. Thanks to the integrated battery holder, time tracking is maintained even in the event of a power failure. The alarm function and interrupt pin allow a microcontroller to go into sleep mode and only be reactivated when an alarm is triggered by the RTC.
The built-in battery holder (battery not included) ensures that real-time tracking is not affected even in the event of a power failure.
Technical data
- Communication: I2C
- RTC IC: PCF85063A
- Voltage: 0.9 V ... 5,5 V
- easyC/Qwiic compatibility
- Dimensions: 38 x 22 mm
The RTC offers a precise and reliable solution for long-term time tracking in applications that require accurate time recording. It is compatible with common microcontroller boards and ensures efficient and continuous time tracking thanks to its low power consumption and alarm function.
easyC
easyC is a robust connection system that optimizes the connection using JST-SH compatible connectors (JST 4-pin) of microcontrollers, sensors and actuators. It offers solderless connections, serial connections of multiple devices (daisy-chaining), error-free design, parallel connection, universal compatibility and intermediate compatibility with Qwiic (Sparkfun connection system), simplifying prototype development. Further information on easyC can be found under ""Data sheets"".
External links
https://github.com/SolderedElectronics/Soldered-PCF85063A-RTC-Module-Arduino-Library"
JOY-IT DEBO LCD 20X4 - Developer Boards - Display LCD 20x4, HD44780
17.81 EUR
20x4 LCD module with 16 pin headerThis 20x4 character LCD is best suited for your project.
It works with the common HD44780 controller chip and has a green backlight.
It has a 16 pin connector and can be used as a built-in or plug-on display. For this purpose, a corresponding solderable pin header is included in the scope of delivery.
Specifications
• Display size: 20 characters x 4 lines
• supply voltage: 4.7 - 5.3 V
• logic level: 5 V
• LCD controller: HD44780
• backlight: 5V DC LED backlight
• green backlight
• 16-pin pin header
• dimensions (LxWxH): 98,3 x 60 x 14 mm
Scope of delivery
• 20x4 LCD module
• 16 pin male header
JOY-IT DEBO RB-BB 3B - Developer boards - Laboratory card, 84 x 54 mm, black
12.48 EUR
Lab card from Joy-it for the developer board areaWelcome to the world of electronic prototypes, where innovation and reliability meet! Our high-quality breadboard is the ideal tool for all your electronics projects.
Whether you are an experienced electronics expert or a beginner, our breadboard is designed to optimize your prototyping experience.
With precise plug-in holes and universal compatibility, it allows you to connect electronic components securely and effortlessly. This allows you to implement your ideas quickly and reliably.
Specifications
• 1 contact terminal with 300 contacts
• 2 distribution terminals with 100 contacts
• Material: plastic
• Color: black
• Adhesive surface on the underside
• Dimensions (LxWxH): 84 x 54 x10 mm
JOY-IT DEBO SD-NAND 512 - Developer boards - 512 MB SD-NAND flash memory
23.28 EUR
This flash memory module allows you to store and read data externally via the SPI interface of your microcontroller.The module is controlled exactly like a conventional SD card and is therefore particularly simple. The module can be operated with 3.3 V as well as 5 V thanks to the integrated voltage converter.
Specifications• Operating voltage: 3 ... 5 V
• logic level: VCC
• Interface: SPI
• memory size: 512 MB
• clock frequency: up to 50 MHz
ADAFRUIT DEBO USB SERIAL - Developer Boards - USB to Serial Adapter, FT232H
24.21 EUR
"This board is similar to other USB to serial adapters, but additionally includes many common protocols like SPI, I2C, serial UART, JTAG! - FT232H chip and one EEPROM for onboard configuration
- 20x GPIO
- Dimensions: 38 x 23 x 4 mm
WAVESHARE "DEBO EPA 2.9 RD - Developer boards - Display E-Ink, 2,9"", black/white/red"
32.64 EUR
This is an E-Ink display module with integrated controller and communication via SPI interface. Due to the advantages such as extremely low power consumption, large viewing angle, large effect in sunlight, it is an ideal choice for many different applications.special features
no backlight, displays the last content for a long time, even after switching off the device
ultra-low power consumption, basically power is only needed for refreshing
SPI interface, for connection to other controller boards like Raspberry / Arduino / Nucleo etc.
comes with development resources and manual (examples for Raspberry Pi / Arduino / STM32)
Technical data- operating voltage: 3,3V
- Interface: 3-wire-SPI, 4-wire-SPI
- Outline dimension: 89.5 × 38 mm
- Display size: 66.89 × 29.05 mm
- Point spacing: 0.138 × 0.138
- Resolution: 296 × 128
- Display colour: black, white, red
- Grayscale: 2
- full update time: 15s
- Energy reserve: 26.4 mV (typ.)
- Standby power: 170°.<0,017 mV
• Betrachtungswinkel:>
Scope of delivery
- Display Module
- Connecting cable XH2.54 20 cm 8-pin
Documentation / Downloads
https://www.waveshare.com/wiki/2.9inch_e-Paper_Modules_(B)
FREI DEBO RTC DS1302 - Developer boards - RTC real-time clock, DS1302
11.4 EUR
Real-time clock module with possible battery backup using the easy-to-use DS1302 chip. The DS1302 chip uses a simple serial interface and sample code is available for Arduino, Raspberry Pi and many others.
The real time clock counts seconds, minutes, hours, the date of the month, the month, the day of the week and the year with leap year compensation valid until 2100.
• serial inputs and outputs for minimum pin count
• 2 V to 5.5 V full operation
• requires less than 300 nA at 2 V
• single byte or multi-byte data transfer for reading or writing clock or RAM data
Note• battery not included (battery see accessories)
WAVESHARE "DEBO EPA 2.9 - Developer boards - 2.9"" E Ink display, black/white"
30.31 EUR
This is an E-Ink display module with integrated controller and communication via SPI interface. Due to the advantages such as extremely low power consumption, wide viewing angle, great effect in sunlight, it is an ideal choice for many different applications.Special features
no backlight, displays the last content for a long time even after switching off
ultra-low power consumption, basically power is only required for refreshing
SPI interface, to connect to other controller boards such as Raspberry / Arduino / Nucleo etc.
comes with development resources and manual (examples for Raspberry Pi / Arduino / STM32)
Technical data
• Operating voltage: 3.3V
• Interface: 3-wire SPI, 4-wire SPI
• Outline dimensions: 89.5 × 38 mm
• Display size: 66.89 × 29.05 mm
• Dot pitch: 0.226 × 0.227
• Resolution: 296 × 128
• Display color: black, white
• Grayscale: 4
• Power reserve: 26.4 mV (typ.)
• Standby power: <0,017 mV
• Betrachtungswinkel:> 170°
Scope of delivery
• Display module
• Connection cable XH2.54 20 cm 8-pin
Documentation / Downloads
http://www.waveshare.com/wiki/2.9inch_e-Paper_Module
FREI DEBO LCD 16X2 BL - Developer boards - Display, 16 x 2 characters, blue
15.63 EUR
This display can be used for all common developer boards, such as Raspberry Pi or Arduino.Specifications
• 16 x 2 characters (2 rows with 16 columns)
• HD44780 industry standard
• with soldered-on I2C communication adapter
• therefore only 4 I/O lines (power supply + 2x data lines) are required for operation
• both 3.3V and 5V logic level (@power supply 5V)
• 16 x 2 characters (2 lines with 16 columns)
• backlight: color blue
SEEED DEBO CAM 2002 64 - Developer boards - Camera, AI, 5MP, 30fps, 64GB
96.67 EUR
"reCamera is an open source AI camera in a compact format, characterized by high programmability and customizability. It is powered by a RISC-V SoC and offers 1 TOPS AI performance directly on the device as well as video encoding with 5 MP @ 30 FPS. Thanks to its modular hardware design and expandable interfaces, it is an extremely versatile platform for developers in the field of vision AI systems.- 1 TOPS on-device AI performance for fast and efficient data processing
- Video encoding with 5 MP resolution at 30 FPS for high-quality image capture
- Programmable and customizable for a wide range of AI applications
- Modular hardware with expandable interfaces for maximum flexibility
- ideal for developers who want to build or experiment with vision AI systems
The combination of powerful on-device AI and flexible architecture makes reCamera an optimal choice for applications such as machine vision, object recognition and edge AI. Extensive customization options are available for developers to meet specific project requirements.
Technical specifications
- AI performance: 1 TOPS @ Int8
- SoC: SG2002
- CPU: Dual-Core C906 (1 GHz + 700 MHz)
- MCU: 8051 with 8 KB SRAM
- RAM: 256 MB
- Video encoding: 5 MP @ 30 FPS
- Camera sensor: OV5647
- eMMC: 64 GB
- Expansion: removable TF card (up to 2 TB, not included)
- Ethernet: 100 Mbps
- USB: USB Type-C (2.0)
- Buttons: 1 reset button, 1 boot button
- Status display: 1 power LED, 2 programmable IO LEDs
- Fill light: 0.3 W white light
- Microphone: onboard microphone
- Speaker: external speaker
- Power supply: 5 V @ 1 A
- Dimensions: 40 x 40 x 36.5 mm
In summary, reCamera is a powerful and versatile solution for modern vision AI projects that impresses with its open architecture and modular design.
External links
https://github.com/Seeed-Studio/OSHW-reCamera-Series
https://github.com/Seeed-Studio/reCamera-OS"
WAVESHARE DEBO PWR SOLAR2 - Developer boards - solar charger for 6- to 24-V panels
20.49 EUR
This solar power management module is designed for 6 to 24V solar panels. It can charge the 3.7V LiPo battery via a solar panel or USB connection and provides a regulated 5V / 1A output.The module has a maximum power point tracking (MPPT) function and multi-protection circuits, so it can still operate highly efficient, stable and safe. It is suitable for solar powered, low power IoT and other environmental protection projects.
• supports MPPT
• supports solar panel / USB port battery charging.
• integrated MPPT SET switch
• two 5 V output interfaces: Pin header and USB connector
• 14500 battery holder and PH2.0 battery connector
• multiple LED indicators to monitor status of solar panel and battery
Technical data• input voltage of the solar module (SOLAR IN): 6 ... 24 V
bulletpoint# microUSB input voltage (USB IN): 5 V
• pin header / USB output (USB OUT): 5 V / 1 A
• charging end voltage: 4.2 V ±1%
• deep discharge protection voltage: 2.9 V ±1%
• solar module charging efficiency:: approx. 78%
• USB charging efficiency: approx. 82%
• 3.7 V battery boost power efficiency: approx. 86%
• max. quiescent current: < 2 mA
• operating temperature: -40 ... +85°C
• dimensions: 65.2 × 56.2 × 22.9 mm
Documentation and downloads can be found here:
www.waveshare.com/wiki/Solar_Power_Manager
ADAFRUIT DEBO SENS COMBI - Developer boards - Sensor with various functions, BNO055
55.27 EUR
"The BNO055 can output the following sensor data- absolute orientation
- angular velocity vector
- acceleration vector
- magnetic field strength vector
- linear acceleration vector
- gravity vector
- temperature
- uses the I2C address 0x28 (default) or 0x29
- Dimensions: 20 x 4 x 27 mm
ADAFRUIT DEBO TEMP HUM - Developer Boards - Temperature and Humidity Sensor, SHT31-D
28.04 EUR
"Breakoutboard with Temperature and Humidity Sensor Sensiron SHT31-D- Uses I2C address 0x44 or 0x45
- mitt relative humidity up to ±2%
- Accuracy: ±0.3°C
- 12.7 x 18 x 2.6 mm
ADAFRUIT DEBO TOUCH SENS - Developer boards - board for capacitive touch sensors, MPR121
21.01 EUR
"You can connect up to 12 individual touch sensors to this board.- flashing LED when touch is detected
- Dimensions: 33 x 19 x 2 mm
2 pin headers included in the scope of delivery"
ADAFRUIT DEBO LOGIC 8CH - Developer boards - bidi. Logic level converter, 8-channel, TXB01
21.11 EUR
"Bidirectional logic level converter- 8-channel
- VCC isolation function: If one of the VCC inputs is on ground, all outputs are in high impedance status
- Low current consumption: max. 4 mA
WAVESHARE "DEBO EPA 1.54 - Developer boards - 1.54"" E Ink display, black/white"
24.94 EUR
"This is an E Ink display module with integrated controller and communication via SPI interface. Benefits including extremely low power consumption, wide viewing angle and high effectiveness in sunlight make it an ideal choice for many different applications.Features
- No background illumination, displays last content for a long time after switch-off
- Ultra-low power consumption, power is basically only needed to refresh
- SPI interface for connecting to other controller boards such as Raspberry/Arduino/Nucleo etc.
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Technical data
- Operating voltage: 3.3 V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimensions: 48 mm x 33 mm
- Display size: 27.6 mm x 27.6 mm
- Dot pitch: 0.138 x 0.138
- Resolution: 200 x 200
- Display colour: black, white
- Grey level: 2
- Partial update time: 0.3 s
- Full update time: 2 s
- Energy reserve: 26.4 mW (typical)
- Standby power: <0.017 mW
- Viewing angle: >170°
Included in delivery
- Display module
- 20-cm, 8-pin connecting cable XH2.54
Documentation/downloads
http://www.waveshare.com/wiki/1.54inch_e-Paper_Module"
WAVESHARE "DEBO EPA 2.7 - Developer boards - 2.7"" E Ink display, black/white"
29.43 EUR
"This is an E Ink display HAT for Raspberry Pi with integrated controller and communication via SPI interface. Benefits including extremely low power consumption, wide viewing angle and high effectiveness in sunlight make it an ideal choice for many different applications.Features
- No background illumination, displays last content for a long time after switch-off
- Ultra-low power consumption, power is basically only needed to refresh
- 4 buttons on board
- Compatible with Raspberry Pi 2B/3B/Zero/Zero W/WH
- SPI interface for connecting to other controller boards such as Raspberry/Arduino/Nucleo etc.
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Technical data
- Operating voltage: 3.3 V
- Interface: 3-wire SPI, 4-wire SPI
- Dimensions: 85 mm x 56 mm
- Display size: 57.288 mm x 38.192 mm
- Dot pitch: 0.217 x 0.217
- Resolution: 264 x 176
- Display colour: black, white
- Grey level: 2 full
- Update time: 6 s
- Energy reserve: 24 mW (typical)
- Standby power: <0.017 mW
- Viewing angle: >170°
Included in delivery
- Display HAT
- 2 screws
Documentation/downloads
https://www.waveshare.com/wiki/2.7inch_e-Paper_HAT"
JOY-IT DEBO UART2RS232 - Developer boards - UART-RS232 transceiver, incl. pin header
13.36 EUR
"The COM-TTL-RS232 transceiver is the ideal solution to enable seamless communication between UART interfaces and RS232 serial ports. This compact module is designed for reliable and bidirectional data transmission and is ideal for use in industrial, communication and control applications.
Main features
- Bidirectional signal conversion: Easily converts data signals between UART and RS232, enabling interaction between modern microcontrollers and legacy devices.
- Easy integration: Compact design and included pin header make it easy to use in your projects.
- Reliability through SP3232E chipset: High stability and efficiency for your applications.
- Flexible use: Supports logic levels from 3 V to 5.5 V and supply voltages of 3 V / 5 V.
Technical data
- Chipset: SP3232E
- Supply voltage: 3 V - 5 V
- Logic level: 3 V / 5 V
- Communication direction: Bidirectional
- Dimensions: 43 x 15 x 3 mm
- Weight: Only 3 g
Scope of delivery
- 1x UART - RS232 transceiver module (COM-TTL-RS232)
- 1x pin header (not soldered)
JOY-IT DEBO SEN-KY033LT - Developer boards - Line Tracker
12.17 EUR
This sensor transmits and receives infrared. It can detect whether it has a reflective surface (the sensor receives its own signal) or an absorbent surface (the sensor does not receive a signal) in front of it. The sensitivity of the sensor can be adjusted using a potentiometer.
Robots, for example, can use three of these sensors to perform an automated line tracker function.
Technical specifications
• Function: Detects a line using infrared (0/1 signal output) / With three of these sensors, robots can automatically follow a line
• Detection range: 1 - 25 mm
• Supply voltage: 3 - 5 V
• Power consumption: 3 V approx. 7 mA / 5 V approx. 13 mA
• Operating temperature: 0 °C to 50 °C
• Dimensions: 42 x 11 x 8 mm
ADAFRUIT DEBO SHD MOTOR - Developer Boards Shield - Servo, 16 Channel, 12 Bit, PCA9685
32.69 EUR
"PWM driver Shield with integrated clock- 6 address selection pins
- adjustable frequency PWM up to approx. 1.6 kHz
- 12 bit resolution for each output
- configurable push-pull or open-drain output
- Dimensions: 54 x 70 x 3 mm
JOY-IT "DEBO LCD 7 HDMI - Developer boards - Display LCD-Touch, 7"", HDMI, GT811"
58.74 EUR
The 7 inch (17.78 cm) TFT display expands the Raspberry Pi or Banana Pi with a touchscreen display in no time at all. It can also be used on any Windows device and convinces with its high contrast and colour-fast display. With a maximum resolution of 1024x600 pixels, this display is suitable for any application.Technical data- Resolution: 1024 x 600
- supported devices: Raspberry Pi, Banana Pi, Banana Pro, Windows PCs
- Connections: HDMI, Micro-USB
- Touch Controller: GT811
- Touch Panel Type: Capacitive (5 Multi-Touch)
- Backlight: LED
- Display size: 154.21 x 85.92 (mm)
Special functions- Can also be used as a standalone HDMI display
reference
- suitable housing see accessories
ADAFRUIT DEBO I2C-MULTI - Developer boards - I2C multiplexer board, TCA9548A
19.61 EUR
"Up to 8 devices can be connected to a microcontroller via the I2C interfaces on this small board.- selectable I2C address: 0x70 to 0x77
- Dimensions: 30.6 x 17.6 x 2.7 mm
ADAFRUIT DEBO 4NUM DIS2 - Development boards - 4-digit 7-Segment Display
24.21 EUR
4-digit 7-segment display• fully assembled
• red illumination
• with 4-pin bar
• Digit size: 14 x 8 mm
• Dimensions: 27 x 50 x 14 mm
ADAFRUIT DEBO BO SMD16 - Developer boards (3 pieces) - SMD breakout circuit board
15.43 EUR
SMD board for SOIC-16 and TSSOP-16 devices SMD board for SOIC-16 and TSSOP-16 devicesSolder your chip to either side and you can get started with any experiment system.
JOY-IT DEBO RB-BB 2B - Developer boards - Laboratory card, 165 x 54 mm, black
12.64 EUR
Lab card from Joy-it for the developer board areaWelcome to the world of electronic prototypes, where innovation and reliability meet! Our high-quality breadboard is the ideal tool for all your electronics projects.
Whether you are an experienced electronics expert or a beginner, our breadboard is designed to optimize your prototyping experience.
With precise plug-in holes and universal compatibility, it allows you to connect electronic components securely and effortlessly. This allows you to implement your ideas quickly and reliably.
Specifications
• 1 contact terminal with 630 contacts
• 2 distribution terminals with 200 contacts
• Material: plastic
• Color: black
• Adhesive surface on the underside
• Dimensions (LxWxH): 165 x 54 x10 mm
WAVESHARE DEBO LCD 160X80 - Developer boards - LCD display, 160 x 80 pixels, ST7735S.
18.99 EUR
"This is an LCD display module with IPS screen, and a diagonal of 0.96 inches. The display has HD resolution and an integrated controller that communicates via an SPI interface.Technical data- Controller: ST7735S
- Interface: SPI
- Display color: RGB, 65 K Colors
- Resolution: 160 x 80
- Backlight: LED
- Operating voltage: 3.3 V
Scope of delivery
1x 0.96"" LCD module
1x PH2.0 20 cm, 8-pin
Documentation and downloads can be found here:
www.waveshare.com/wiki/0.96inch_LCD_Module"
FREI DEBO TOUCH 4CH - Developer boards - Touch-Pad, 4 keys, capacitive, TTP224
11.91 EUR
The semiconductor-based touch pad is the durable alternative to classic keyboards with switches. Thanks to the capacitive measurement, the pad is also suitable for dusty or rough environments. Technical data• chipset: TTP224 for four keys
• supply voltage: 2.4 - 5.5 V DC
• status display
• dimensions:35 x 29 mm
FREI "DEBO LCD 2.0 - Developer boards - Display LCD, 2.0"", 220 x 176 pixels, ILI9225"
18.21 EUR
"Display LCD, 2.0"", 220 x 176, ILI9225Specifications• driver chip ILI9225
• resolution 220 x 176
• SPI interface"
IDUINO DEBO LASER01 - Developer boards - Laser, 635 nm, 5 V
11.91 EUR
"This compact transmitter module emits a small and intense laser beam with a wavelength of 635 nm (red). It is connected via three pins as follows:
- Ground
- Signal
- Supply (5V)
Security adviceNever look directly into the laser to avoid eye damage"
ADAFRUIT DEBO LED NP12 - Developer Boards - NeoPixel Ring with 12 WS2812
22.87 EUR
"12 ultrabright LED Neopixels arranged in a circle.- 16 individually addressable RGBs
- voltage range: 4 - 7 V
- outside diameter: 36.8 mm
- inside diameter: 23.3 mm
SEEED DEBO CAM 2002 8 - Developer boards - Camera, AI, 5MP, 30fps, 8GB
59.36 EUR
"reCamera is an open-source AI camera in a compact format, characterized by high programmability and customizability. It is powered by a RISC-V SoC and offers 1 TOPS AI performance directly on the device as well as video encoding with 5 MP @ 30 FPS. Thanks to its modular hardware design and expandable interfaces, it is an extremely versatile platform for developers in the field of vision AI systems.- 1 TOPS on-device AI performance for fast and efficient data processing
- Video encoding with 5 MP resolution at 30 FPS for high-quality image capture
- Programmable and customizable for a wide range of AI applications
- Modular hardware with expandable interfaces for maximum flexibility
- ideal for developers who want to build or experiment with vision AI systems
The combination of powerful on-device AI and flexible architecture makes reCamera an optimal choice for applications such as machine vision, object recognition and edge AI. Extensive customization options are available for developers to meet specific project requirements.
Technical specifications
- AI performance: 1 TOPS @ Int8
- SoC: SG2002
- CPU: Dual-Core C906 (1 GHz + 700 MHz)
- MCU: 8051 with 8 KB SRAM
- RAM: 256 MB
- Video encoding: 5 MP @ 30 FPS
- Camera sensor: OV5647
- eMMC: 8 GB
- Expansion: removable TF card (up to 2 TB, not included)
- Ethernet: 100 Mbps
- USB: USB Type-C (2.0)
- Buttons: 1 reset button, 1 boot button
- Status display: 1 power LED, 2 programmable IO LEDs
- Fill light: 0.3 W white light
- Microphone: onboard microphone
- Speaker: external speaker
- Power supply: 5 V @ 1 A
- Dimensions: 40 x 40 x 36.5 mm
In summary, reCamera is a powerful and versatile solution for modern vision AI projects that impresses with its open architecture and modular design.
External links
https://github.com/Seeed-Studio/OSHW-reCamera-Series
https://github.com/Seeed-Studio/reCamera-OS"
ADAFRUIT DEBO SENS ACC2 - Developer Boards - Accelerometer Board, MMA8451Q
21.01 EUR
"This accelerometer board can be used with phones, tablets, smart watches and many more.- simple use with Arduino or another microcontroller
- installed tilt / position detection
- Wide range of use from 2 to 8 g
- very precise with built-in 14-bit ADC
- Dimensions: 21 x 18 x 2 mm
FREI "DEBO LCD 2.2 - Developer boards - Display LCD, 2.2"", 220 x 176 pixels, ILI9225"
18.48 EUR
"Display LCD, 2.2"", 220 x 176, ILI9225Specifications• driver chip ILI9225
• resolution 220 x 176
• SPI interface"
IDUINO DEBO LED BI 3MM - Developer boards - LED, Bi-Color, 3 mm
10.93 EUR
Dieses kleine Steckboard besitzt eine sofort einsatzbereite zweifarbige Leuchtdiode. Diese wird über drei statt zwei Pins angesteuert und leuchtet in den Farben Grün und Rot. Anschluss- und Codebeispiel finden Sie im hinterlegten Datenblatt.Merkmale
• Grüne + Rote LED
• Wellenlänge: 571 nm + 644 nm
• Durchmesser der LEDs: 3 mm
• diffus klare Linse
• 150° Abstrahlwinkel
Elektrische Eigenschaften
• Spannung: 2,0 - 2,5 V
• Strom: 10 mA
Anschluss
1: Rote LED
2: Grüne LED
3. Masse
FREI DEBO TOUCH 16CH - Developer Boards - Touch Pad, 16 Keys, capacitive, TTP229
12.22 EUR
The semiconductor-based touch pad is the durable alternative to classic keyboards with switches. Thanks to the capacitive measurement, the pad is also suitable for dusty or rough environments. The internal calibration detects changes in the environment and automatically adjusts the sensitivity.Technical data• Chipset: TTP229
• Supply voltage: 2.4 - 5.5 V DC
• standby consumption from 2 µA
• serial interface
• selectable sampling rate
• automatic calibration
• dimensions:65 x 50 mm
ADAFRUIT DEBO LED NP8 - Developer boards - NeoPixel-Stick with 8 WS2812 RGB-LEDs
18.21 EUR
"8 ultrabright LED Neopixels arranged in strips.- 8 individually addressable RGBs
- voltage range: 4 - 7 V
- Dimensions: 51 x 10 x 3.2 mm