Lighting
Price Comparison
The Best
For use as general and accent lighting in private and professional applications
Replacement for a conventional 20-W bulb
- Output: 2.1 W
- Light colour: 827 2700 K, extra-warm white
- Luminous flux: 400 lm
- Glass body like halogen lamps
- For direct operation at 230 V
- Suitable for twilight switches
- Suitable for motion detectors
- Instant start
- Minimal heat generation
- No UV or infrared radiation
- Dimmable
Top Pick
Philips MASTER LEDtube HF InstantFit ECGs are ideal as an alternative to conventional T8 fluorescent lamps on electronic ballasts and enable considerable energy savings.
LED lamp as a replacement for conventional fluorescent lamps for use in private and professional applications.
E.g. in corridors, shelf lighting, backlighting, display cabinets, parking garages, cold stores, stairwells.
- Instant start, no flickering when switched on
- No mercury
- LEDtube for electronic ballasts are not suitable for operation on 230V
Supplied without starter
Excellent
For use as general and accent lighting in private and professional applications.
Features:
- Power consumption: 2.3 W
- Light colour 827 warm white extra, 2700 K
- Beam angle: 36°
- GU4 base
- Luminous flux: 184 lumens
- Nominal service life: 25,000 hours
- Glass body like halogen lamps
- Voltage: for 12-V low-voltage halogen transformers or LED drivers
- Suitable for twilight switches
- Suitable for motion detectors
- Instant start
- Minimal heat generation
- No UV or infrared radiation
- Maximum diameter: 35 mm
Recommended
Features:
- Length 1500 mm (equivalent to the length of a conventional 58 W fluorescent lamp)
- Output: 21.1 W
- Luminous flux: 4100 lm
- Light colour: 840 4000 K, neutral white
- Fitting: G13
- For operation on conventional ballasts with starter (KVG/VVG) or on 230 V mains voltage
- Includes bypass starter
Featured
LED PLC
For use as general and accent lighting in private and professional applications
LED replacement for PLC 4P, TCDE, Dulux DE, Ralux DE, Lynx DE and all bulbs of the same type
4-pin bulbs for electronic ballasts (PLC 4P. Dulux DE, TCDE, Ralux DE, LynxDE etc.)
- Output: 6.5 W
- Replacement for 18-W bulb with 4-pin fitting
- Light colour: 830 3000 K, warm white
- Luminous flux: 700 lm
- Rotatable fitting (135 degrees)
- For horizontal use
- In the case of vertical use, check the light distribution
- Housing made from shatter-proof polycarbonate
- Use without conversion, operation on existing ballast possible
- Not dimmable
- Immediate start
- Not suitable for direct current
Alternative
Philips LED LIGHT BULB SHAPED lamp
- Output: 5.9 W
- Fitting: E27
- Matt surface
- LED filament technology
- Light volume: 806 lm
- Dimmable
- Warm white light from 922 to 927 with 2200 to 2700 K
- Colour reproduction > Ra90
- When dimming down, the light colour of the DimTone bulb becomes warmer (with 100% light, the light colour is 2700 K (warm white) and changes to 2200 K (extra-warm white) when dimmed down to 10%). Just as with halogen lamps and standard light bulbs.
Features:
- Housing made from shatter-proof polycarbonate
- Power consumption: 6.5 W
- Light colour 830 warm white with 3000 K
- Socket: GX24q-2
- Nominal service life: 30,000 hours
- Luminous flux: 720 lumens
- Beam angle: 120°
- No conversion required, operation with existing electronic ballast for 18-W compact fluorescent lamps
- Flicker-free
- Immediate start
- No UV light, low heat
- Not suitable for direct current
- Same length as an electronic 18-W compact fluorescent lamp
- Check compatibility with the electronic ballast using the compatibility list at https://www.lighting.philips.co.uk/consumer/documentation-and-downloads
- Only 5.5-W power consumption
- Luminous flux: 375 lm
- Warm white light with 3000 K
- Excellent colour reproduction with 97 Ra
- Dimmable with many dimmers
- Beam angle: 36°
- LED service life up to 40,000 h
- Diameter: 50 mm
- Height: 54 mm
LED PLC
For use as general and accent lighting in private and professional applications
LED replacement for PLC 4P, TCDE, Dulux DE, Ralux DE, Lynx DE and all bulbs of the same type
4-pin bulbs for electronic ballasts (PLC 4P. Dulux DE, TCDE, Ralux DE, LynxDE etc.)
- Output: 9.5 W
- Replacement for 26-W bulb with 4-pin fitting
- Light colour: 830 3000 K, warm white
- Luminous flux: 1100 lm
- Rotatable fitting (135 degrees)
- For horizontal use
- In the case of vertical use, check the light distribution
- Housing made from shatter-proof polycarbonate
- Use without conversion, operation on existing ballast possible
- Not dimmable
- Immediate start
- Not suitable for direct current
- Only 5.5-W power consumption
- Luminous flux: 375 lm
- Warm white light with 3000 K
- Excellent colour reproduction with 97 Ra
- Dimmable with many dimmers
- Beam angle: 25°
- LED service life up to 40,000 h
- Diameter: 50 mm
- Height: 54 mm
Same length as 36-watt compact fluorescent bulb
The CorePro LED PLL LEDs are to be operated like conventional PL-L/TC-L compact fluorescent lamps on an electronic ballast.
This innovative LED solution allows you to achieve high energy savings compared to conventional solutions.
Please note
When switching to PLL LED, it must be ensured that the illumination levels required by regulations are maintained.
We would like to point out that the overall energy efficiency and light distribution of a system are determined by the design of the system.
PLL LEDs with electronic ballast are not suitable for operation on 230 V
Lamp should be used in dry environments and should only be used in conjunction with a light fixture approved for the application area
The CorePro PLL LED is compatible with common brand-name electronic ballasts.
Please check compatibility with the tested ballasts on the compatibility list at www.philips.de/LEDtube before installing
MASTER LEDtube T8 Ultra Efficiency
Maximum performance, minimum energy consumption.
The Philips LEDtube Ultra Efficiency T8 is the first LED tube to have the new top label energy class A!
- Ultra-efficient with up to 210 lm/W
- Rotating end cap for optimal light settings
- Up to 70% energy savings compared to conventional lamps
- Ultra-long service life of 100,000 hours
- Easy 1:1 replacement thanks to retrofit
- Breakage- and impact-resistant thanks to polycarbonate
- Pays off within a few months
- Suitable for operation on conventional or low-loss ballast and directly on 230 V AC mains voltage
CorePro LED linear D 14-120W R7S 118 830
CorePro R7S is a retrofit solution to replace conventional R7S twin-side socketed lamps. Their light is comparable to that of a halogen lamp thanks to the ''light all around'' concept. Within the range, you can choose dimmable products with low-dimming function, which can create a cosy atmosphere when inserted in a dimmable luminaire.
Philips LED LIGHT BULB SHAPED lamp
- Output: 4 W
- Fitting: E27
- Matt surface
- LED filament technology
- Light volume: 470 lm
- Dimmable
- Warm white light from 922 to 927 with 2200 to 2700 K
- Colour reproduction > Ra90
- When dimming down, the light colour of the DimTone bulb becomes warmer (with 100% light, the light colour is 2700 K (warm white) and changes to 2200 K (extra-warm white) when dimmed down to 10%). Just as with halogen lamps and standard light bulbs.
Features:
- Mercury-free
- Power consumption: 10.5 W
- Fitting: E27
- Luminous flux: 1521 lumens
- Beam angle: 360 degrees
- Light colour: Extra-warm white with 2700 Kelvin
- For direct operation at 230 V
- Suitable for twilight switches
- Suitable for motion detectors
- Instant start
- Minimal luminous flux
- Minimal heat generation
- No UV or infrared radiation
Philips LED LIGHT BULB SHAPED lamp
- Output: 7.2 W
- Fitting: E27
- Clear bulb
- LED filament technology
- Light volume: 1055 lm
- Dimmable
- Warm white light from 922 to 927 with 2200 to 2700 K
- Colour reproduction > Ra90
- When dimming down, the light colour of the DimTone bulb becomes warmer (with 100% light, the light colour is 2700 K (warm white) and changes to 2200 K (extra-warm white) when dimmed down to 10%). Just as with halogen lamps and standard light bulbs.
Philips LED LIGHT BULB SHAPED lamp
- Output: 10.5 W
- Fitting: E27
- Clear bulb
- LED filament technology
- Light volume: 1521 lm
- Dimmable
- Warm white light from 922 to 927 with 2200 to 2700 K
- Colour reproduction > Ra90
- When dimming down, the light colour of the DimTone bulb becomes warmer (with 100% light, the light colour is 2700 K (warm white) and changes to 2200 K (extra-warm white) when dimmed down to 10%). Just as with halogen lamps and standard light bulbs.
Features:
- Housing made from shatter-proof polycarbonate
- Power consumption: 8 W
- Light colour: 840 neutral white with 4000 Kelvin
- Fitting: 2G11
- Nominal service life: 30,000 hours
- Luminous flux: 1000 lm
- Beam angle: 160 degrees
- No conversion required, operation with existing electronic ballast for 18-W compact fluorescent lamps
- Flicker-free
- Immediate start
- No UV light, low heat dissipation
- Not suitable for direct current
- Same length as an electronic 18 W compact fluorescent lamp
- Check compatibility with the electronic dimmer using our compatibility list available at https://www.lighting.philips.de/consumer/documentation-and-downloads
The Philips MASTER LEDtube HF InstantFit EVG is an excellent alternative to conventional T8 fluorescent lamps on electronic ballasts and provides significant energy savings.
LED lamp to replace conventional fluorescent lamps for use in private and professional applications.
e.g. in corridors, shelving lights, back lights, display cases, parking garages, cold stores, stairwells.
- Instant start, no flickering when switching on
- No mercury
- LED tubes for electronic ballasts are not suitable for operation on 230 V
- Power: 13 W
- Warm white light with 2700 K
- 2000-lm luminous flux, replacement for a 120-W incandescent lamp
- Colour rendering index: 80 Ra
- Efficiency: 153 lm/W
- Nominal service life: 15,000 h
- Switching assured for up to 20,000 switching cycles
- Not dimmable
- Fitting: E27
LED PLC
For use as general and accent lighting in private and professional applications
LED replacement for PLC 4P, TCDE, Dulux DE, Ralux DE, Lynx DE and all bulbs of the same type
4-pin bulbs for electronic ballasts (PLC 4P. Dulux DE, TCDE, Ralux DE, LynxDE etc.)
- Output: 9.5 W
- Replacement for 26-W bulb with 4-pin fitting
- Light colour: 830 3000 K, warm white
- Luminous flux: 990 lm
- Rotatable fitting (135 degrees)
- For horizontal use
- In the case of vertical use, check the light distribution
- Housing made from shatter-proof polycarbonate
- Use without conversion, operation on existing ballast possible
- Not dimmable
- Immediate start
- Not suitable for direct current
LED pin fitting bulb
For use as general and accent lighting in private and professional applications.
- G9 base
- Output: 1.9 W
- Light colour: 827 2700 K, extra-warm white
- Luminous flux: 220 lm
- Mercury-free
- Instant start
- Minimal luminous flux
- Minimal heat generation
- No UV or infrared radiation
- Impact-proof and vibration-proof
- Dimensions:
- Total length: 34 mm
- Maximum diameter: 14 mm
Lighting Best Products
Features:
- Housing made from shatter-proof polycarbonate
- Power consumption 9 W
- Light colour 840 neutral white, 4000 K
- Socket: GX24q-3
- Nominal service life: 30,000 hours
- Luminous flux: 1100 lm
- Beam angle: 120°
- No conversion required, operation with existing electronic ballast for 26-W compact fluorescent lamps
- Flicker-free
- Immediate start
- No UV light, low heat
- Not suitable for direct current
- Same length as an electronic 26-W compact fluorescent lamp
- Check compatibility with the electronic ballast using the compatibility list at https://www.lighting.philips.co.uk/consumer/documentation-and-downloads
CorePro R7S is a retrofit solution to replace conventional R7S double-ended linear lamps. Their light is comparable to that of a halogen lamp thanks to the ''light all around'' concept.
LED lamp to replace conventional fluorescent lamps for use in private and professional applications. e.g. in corridors, shelving lights, back lights, display cases, parking garages, cold stores, stairwells.
Features:
- Same length as a 18-watt fluorescent lamp
- Operation in luminaires for fluorescent lamps with conventional ballast (conventional and low-loss) or for connecting directly to 230 V mains.
- Includes LED starter jumper
- Instant start, no flickering when switching on
- No mercury
Dimensions:
Total length: 600 mm
- Length: 150 cm
- Power: 20 W
- 4000 K (840) neutral white light
- Luminous flux: 3700 lm
- Beam angle: 160°
- Colour rendering index: 80 Ra
- Efficiency: 185 lm/W
- Nominal service life: 70,000 h
- Switching assured for up to 200,000 switching cycles
- Operating temperature: -20 to 45°C
- For lamps with conventional or low-loss ballast
- Bulbs made of glass, satinised
- Not dimmable
CorePro LED linear R7S 118 mm 14 - 100 W 830 D
CorePro R7S is a retrofit solution to replace conventional R7S twin-side socketed lamps. Their light is comparable to that of a halogen lamp thanks to the ''light all around'' concept. Within the range, you can choose dimmable products with low-dimming function, which can create a cosy atmosphere when inserted in a dimmable luminaire.
LED PLC
For use as general and accent lighting in private and professional applications
LED replacement for PLC 4P, TCDE, Dulux DE, Ralux DE, Lynx DE and all bulbs of the same type
4-pin bulbs for electronic ballasts (PLC 4P. Dulux DE, TCDE, Ralux DE, LynxDE etc.)
- Output: 6.5 W
- Replacement for 18-W bulb with 4-pin fitting
- Light colour: 840 4000 K, neutral white
- Luminous flux: 770 lm
- Rotatable fitting (135 degrees)
- For horizontal use
- In the case of vertical use, check the light distribution
- Housing made from shatter-proof polycarbonate
- Use without conversion, operation on existing ballast possible
- Not dimmable
- Immediate start
- Not suitable for direct current
- Only 3.9-W power consumption
- Luminous flux: 300 lm
- Neutral white light with 4000 K
- Excellent colour reproduction with 97 Ra
- Dimmable with many dimmers
- Beam angle: 36°
- LED service life up to 40,000 h
- Diameter: 50 mm
- Height: 54 mm
CorePro LEDtube T8 for conventional/low-loss ballast
The Philips CorePro LEDtube family is an ideal alternative to conventional T8 fluorescent lamps on conventional/low-loss ballast.
The energy efficiency ensures immediate savings you can rely on for a long and reliable service life.
- High energy savings compared to conventional T8 fluorescent lamps.
- Minimal maintenance costs due to high service life.
- Usually pays off during the first year.
- More robust and resistant compared to conventional T8 fluorescent lamps.
- No power-on delay and optimal lighting without any flickering or humming.
- Free from mercury.
Philips LED LIGHT BULB SHAPED lamp
- Output: 10.5 W
- Fitting: E27
- Matt surface
- LED filament technology
- Light volume: 1521 lm
- Dimmable
- Warm white light from 922 to 927 with 2200 to 2700 K
- Colour reproduction > Ra90
- When dimming down, the light colour of the DimTone bulb becomes warmer (with 100% light, the light colour is 2700 K (warm white) and changes to 2200 K (extra-warm white) when dimmed down to 10%). Just as with halogen lamps and standard light bulbs.
Used in general and accent lighting in private and professional applications
Replacement for a conventional 35-watt lamp
Features:
- Glass body like halogen lamps
- For operation at 230 volts
- Suitable for twilight switches
- Suitable for motion detectors
- Instant start
- Minimal heat generation
- No UV or infrared radiation
- non-dimmable
Dimensions:
Total length: 54 mm
Maximum diameter: 50 mm
CorePro LEDtube T8 for conventional/low-loss ballast
The Philips CorePro LEDtube family is an ideal alternative to conventional T8 fluorescent lamps on conventional/low-loss ballast.
The energy efficiency ensures immediate savings you can rely on for a long and reliable service life.
- High energy savings compared to conventional T8 fluorescent lamps.
- Minimal maintenance costs due to high service life.
- Usually pays off during the first year.
- More robust and resistant compared to conventional T8 fluorescent lamps.
- No power-on delay and optimal lighting without any flickering or humming.
- Free from mercury.
Features:
- Mercury-free
- Power consumption: 8.5 W
- Fitting: E27
- Luminous flux: 1055 lumens
- Beam angle: 360 degrees
- Light colour: Extra-warm white with 2700 Kelvin
- For direct operation at 230 V
- Suitable for twilight switches
- Suitable for motion detectors
- Instant start
- Minimal luminous flux
- Minimal heat generation
- No UV or infrared radiation
For use as general and accent lighting in private and professional applications.
Features:
- Power consumption: 4.4 W
- Light colour: 827 extra-warm white with 2700 Kelvin
- Beam angle: 36 degrees
- Fitting: GU5.3
- Luminous flux: 345 lumens
- Glass body like halogen lamps
- Voltage: for 12 V low-voltage halogen transformers or LED drivers
- Suitable for twilight switches
- Suitable for motion detectors
- Instant start
- Minimal heat generation
- No UV or infrared radiation
- Maximum diameter: 50 mm
- Only 5.5-W power consumption
- 400 lm luminous flux
- Neutral white light with 4000 K
- Excellent colour reproduction with 97 Ra
- Dimmable with many dimmers
- Beam angle: 25°
- LED service life up to 40,000 h
- Diameter: 50 mm
- Height: 54 mm
