REICHELT IE: Controller cards
The Best
- PCIe Gen4 x16 interface
- Supports M Key Type 2242/2260/2280/22110 M.2 PCI Express module Gen4 x4 64Gb/s
- Supports Intel® VROC technology
- Full support for the latest Intel® NVMe M.2 SSD
- Fan with variable speed
- ASRock Quad M.2 cards service programme
Bootable M.2 RAID support
Supports up to 4 PCIe Gen3 x4 NVMe M.2 SSDs on the AMD TRX40/X399 platform and virtual RAID on CPU (VROC) technology on the Intel® X299 platform*. Allows you to create a bootable RAID array with up to 4 M.2 SSDs**.
*Only Intel® SSDs can support VROC.
**PCIe x16 must be split by the motherboard into four PCIe x4 lanes, please make sure your motherboard supports this feature
All-aluminium cover and full-coverage thermal pad
The 11 cm thermal pad able to fully cover any NAND flash on the M.2 SSD and transfer the heat generated by the high-speed M.2 SSD to the aluminium cover. Extend the longevity of each device."
Top Pick
Specification
- Connectors:
external:
7 x USB 5 Gbps Type-A female
internal:
1 x SATA 15 pin power connector
1 x PCI Express x1, V2.0 - Chipset: VIA VL812, VL805
- Data transfer rate up to 5 Gbps
- Supports xHCI specifications V1.0
- Bootable
- 1 x LED indicator
System requirements
- Linux Kernel 5.15 or above
- Windows 8.1/8.1-64/10/10-64/11
- PC with one free PCI Express slot
- Power supply with a free SATA power connector
Package content
- PCI Express card USB 5 Gbps
- User manual
Package
- Box
Excellent
-Compliant with SATA revision I/II/III (1.5/3.0/6.0 Gbps)
The MSAT2SAT3 mSATA to SATA adapter enables you to connect a standard SATA drive to an available mSATA port.
The adapter improves system capacity by enabling an mSATA port to host a larger SATA hard drive (tested up to 4TB). For guaranteed compatibility and performance the adapter is compliant with SATA I/II/III revisions, allowing for transfer speeds up to 6Gb per second.
The MSAT2SAT3 is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Recommended
- Input: PCI-Express, 1-Lane
- Output: DB25, DB9 M, parallel port, serial port, 2-port output
- PC connection: x1 slot
- Version: standard profile, low profile
The AXAGON PCEA-PSN PCI Express card adds a parallel interface with a DB25 connector on the board and two standard serial RS-232 interfaces with DB-9 connectors on the bezel.
High performance, trouble-free compatibility and extensive connection options are ensured by the proven ASIX chipset.
The supplied low profile bezel allows the controller to be installed in standard and low-profile PC housings."
Featured
- USB 2.0 PCI Card
- 4x USB 2.0 Type A female external
- 1x USB 2.0 Type A female intern
- Automatic IRQ address
- Max. transfer rate: 480 Mbit/s
- Internal overvoltage protection
- Chipset: VIA
Alternative
- HIGH PERFORMANCE: Expand your desktop computer or server with six SATA III 6-Gbit/s ports via a PCIe x4 slot to connect SATA drives (HDD/SSD). The card has six ports for drives, SATA cables sold separately
- ASM1166 CONTROLLER: PCI Express SATA 3 6-Gbit/s card has single-chip architecture that adds six SATA 6-Gbit/s ports over a x4 PCIe slot, with a combined total bandwidth of 16 Gbit/s. Supports port multipliers and NCQ (Native Command Queue)
- COMPATIBILITY: Supports PCIe3.0, SATA3.2 and AHCI1.4 specs and previous generations (lower performance) Windows(7+), MacOS(10.10+), Linux(2.6.32+) Better motherboard compatibility without built-in RAID Supports ATA&ATAPI(HDD, SSD, optical disc)
- EASY INSTALLATION: Plug-and-play expansion card in full-/low-profile PCIe slot (full-profile bezel installed, low-profile included). For storage management systems such as Storage Spaces (Microsoft), RAID Assistant (MacOS), mdraid/mdadm (Linux)
new or existing system with RAID 1 or 0 hardware.
The installation is very simple. Both hard drives and a port of the motherboard are
connected to the EX-3455.
For an existing operating system, data from hard drive 0 is automatically copied to hard drive 1 in the background.
You can continue to work normally during this time. When a new operating system is installed,
the data is written to both hard drives simultaneously with no loss of speed.
The EX-3455 can be installed in an 8.9 cm (3 1/2"") or 13.34 cm (5 1/4"") front bay or in a PCI Express
slot. With the low-profile bracket, the EX-3455 can even be used in a
narrow housing up to a height of 8 cm.
Since the EX-3455 requires no drivers and software, it can be used for any operating system.
• 1-to-2 SATA 2 hardware RAID 0/1 for two SATA 2 hard drives
• Supports RAID 0, 1, LARGE and EZ-RAID 1 mode can be adjusted via DIP
switches
• Supports RAID 1 with auto rebuild in the background
• 3 1/2"" or 5 1/4"" front slot for normal or narrow computer systems
• Supports hard drives over 2 TB
• LED display for the RAID and hard drive status
• Complete SATA 2 and power cable set, including standard and low-profile bracket
• Suitable for all operating systems
Specifications:
• Data transfer rate: from 1.5 GB/s to 6.0 GB/s
• Connections: 1 x 7-pin SATA connector from the motherboard
• 2 x 7-pin SATA connector to the hard drives
• 1 x power connection from the housing power supply unit
Hardware systems:
• 3 1/2"" or 5 1/4"" housing slot or PCI Express slot
• Operating temperature: 0 to 55 Celsius
• Storage temperature: -40 to 75 Celsius
• Relative humidity: 5% to 95%
• Size: 74 x 68 mm
• Weight: 400 g
Included with delivery:
• EX-3455, 3 x SATA 2 cables, 1 x power cable
• 3 1/2"" or 5 1/4"" frame, standard and low-profile bracket
• Manual"
Technical details
- Connectors:
internal:
2 x SATA 6 Gb/s 7 pin plug
1 x PCI Express x1, V3.0 - Chipset: JMicron JMB582
- 3 x LED indicator
- Supports Native Command Queuing (NCQ)
- Supports S.M.A.R.T.
- Supports TRIM
- Supports DevSleep
- Hot Swap
- Bootable
System requirements
- Linux Kernel 3.3 or above
- Windows 7/7-64/8.1/8.1-64/10/10-64/11
- PC with one free PCI Express slot
Package content
- PCI Express card
- Low profile bracket
- User manual
Package
- Retail Box
Specification
• Connectors:
external: 1 x Parallel DB25 female
internal: 1 x PCI Express x1, V1.1
• Chipset: WCH382L
• Data transfer rate up to 1.5 Mbps
• FIFO: 256 byte
• SPP, EPP, ECP compatible to IEEE 1284
• Operating temperature: -40 °C ~ 85 °C
• Relative humidity: 0 - 95 % (non condensing)
• Dimensions (LxWxH): ca. 79 x 59 x 13 mm
System requirements
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC with one free PCI Express slot
Package content
• PCI Express card
• Low profile bracket
• Driver CD
• User manual
Package
• Retail Box
With a higher core clock frequency, twice the memory, more powerful ARM cores, optional RISC-V cores, new security features and improved interfaces, the Raspberry Pi Pico 2 offers a significant performance boost while remaining compatible with previous models in the Raspberry Pi Pico series.
Programmable in C/C++ and Python, and equipped with detailed documentation, the Raspberry Pi Pico 2 is the ideal microcontroller board for both enthusiasts and professional developers.
A chip of the new generation
The Raspberry Pi Pico 2 is powered by the RP2350, our new, powerful and secure microcontroller. Every aspect of the design has been improved, from the CPU cores to our unique PIO interface. We have introduced a comprehensive security architecture based on ARM TrustZone for Cortex-M. New power saving capabilities and package options also extend the range of possible applications.
Technical specifications
- Dual Arm Cortex-M33 or Dual Hazard3 processors @ 150 MHz
- 520 KB on-chip SRAM
- Software and hardware compatible with Raspberry Pi Pico 1
- Drag-and-drop programming via mass storage over USB
- Castellated module enables direct solder connection to carrier boards
- Optional boot signing, enforced by on-chip mask ROM, with key fingerprint in OTP
- Protected OTP memory for optional boot decryption key
- Global bus filtering based on Arm or RISC-V security/authorization levels
- Peripherals, GPIOs and DMA channels individually assignable to security areas
- Hardware mitigations for fault injection attacks
- Hardware SHA-256 accelerator
- 2× UART
- 2× SPI controller
- 2× I2C controller
- 24× PWM channels
- 4× ADC channels
- 1× USB 1.1 controller and PHY, with host and device support
- 12× PIO status machines
- Open source C/C++ SDK, MicroPython support
- Operating temperature -20°C to +85°C
- Supported input voltage 1.8 ... 5.5 V DC
For further information see data sheets and at
https://pico.raspberrypi.org/getting-started/
https://github.com/micropython/micropython/wiki
https://forum.micropython.org/
https://pico.raspberrypi.org/sdk/index.html"
The EX-44388 PCI-Express I/O card provides eight serial RS-232 High Performance UART 16C1050 outputs. It has been developed to expand eight additional serial ports for PC, small workstation or server via the PCI Express bus. The card is fully PCI-Express plug-and-play compatible and has no problems with IRQ and I/O address conflicts. In addition, +5V or +12V can be configured on pin 9 of the serial connector for a POS system (Power over System). With the EX-44388 a low profile bracket is supplied so that the card can also be installed in a narrow PC housing.
- Interface: RS-232 V.24 with FIFO Buffer 16C1050 with 256Byte
- ±15kV IEC1000-4-2 ESD protection for RS232 I/OS
- I/O addresses and interrupt are assigned by the operating system, IRQ sharing
- PCIe interface compatible with 1.0a to 3.0 specifications
- Data Bits: 5, 6, 7, 8
- Stop Bits: 1, 1.5, 2
- Parity: none, even, odd, space, mark
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Supports RTS/CTS and XON/XOFF Flow Control
- Supports +5V or+12V on pin 9 of the serial connectors
- Chip set: SystemBase SB16C1058PCI
Drivers: See Operating Systems
Operating system: Win98, me, 2000/XP/Vista/7/8.x/10 (32&64) Sever 200x & 2012R2, SCO-Unix, Linux 2.4 or higher
Scope of delivery: EX-44388, Octopus cable, LP bracket, driver CD, manual"
Specification
- IOI part number: M2-PCIE4XCA02
- Connectors internal: 1 x 67 Pin M.2 Key M Slot, 1 x PCI Express x4, V4.0
- Interface: PCIe
- supports M.2 modules in format 2280, 2260 and 2242 with Key M or Key B+M on PCIe basis
- maximum height of components on the module: 1.5 mm, use of double-sided modules possible
- supports NVM Express (NVMe)
- 2 x LED display
System requirements
- Windows 7/7-64/8.1/8.1-64/10/10-64, Linux Kernel 3.19
- PC with one free PCI Express x4 / x8 / x16 / x32 slot
Package contents
Packaging
- Box
Specifications
- Connections:
- 1 x 67-pin M.2 key M slot
- 1 x PCI Express x4, V4.0
- Interface: PCIe/NVMe
- Supports M.2 modules in formats 2280, 2260, 2242 and 2230 with key M or key B+M on PCIe basis
- Maximum height of components on the module: 1.5 mm, use of two-sided modules possible
- 1x LED display
- Supports NVM Express (NVMe)
- Bootable, UEFI version 2.3.1 or higher
- Supports S.M.A.R.T.
- Supports TRIM
System requirements
- Linux Kernel 5.8 or higher
- Windows 8.1/8.1-64/10/10-64
- Windows Server 2019
- PC with one free PCI Express x4/x8/x16/x32 slot
Contents
- PCI Express card
- Low profile trim
- Screwdriver
- Fastening material
- Heat conduction pad
- User manual
Packaging
- Retail box
Features
- PCIe 3.0 x4, up to 32 Gbit/s
- Supports M.2 sizes of 22x30/42/60/80 mm
- Optional full and half profile slot bracket
- Including a massive heat sink with a blue LED highlight
- Compatible with Windows® 10
Future-proof expansion
With the PCI expansion card you can easily upgrade older systems to the new level. You can experience all the advantages of a fast M.2 SSD without having to rebuild the whole system again.
Customizable
The IB-PCI214M2-HSL contains both a full and a half profile cover. This means that it can be used in almost any type of housing without any problems. In addition, M.2 SSDs with the dimensions of 22x30/42/60/80 mm can be installed. No matter what configuration you need, the IB-PCI214M2-HSL gives full throttle in any setting.
Speed until the board glows
The current M.2 NVMe SSDs achieve more than five times the speed of traditional SATA SSDs. This enormous power naturally generates a lot of waste heat on the small M.2 cards. In order to protect the card and the system, the speed is throttled if the SSD heats up too much. The IB-PCI214M2-HSL offers enough cooling power with the enclosed heat conduction pads and the large heat sink so that you can enjoy the full power of your M.2 SSD at all times.
Power and design
The massive heat sink is not only responsible for temperature control. The integrated acryl glass highlight is illuminated by LEDs and immerses the system in a rich blue tone."
Technical data
• VIA chipset VIA VL800
• 3 x USB 3.0 type A
• 1 x internal USB 3.0 type A
• 1 x internal Molex 4-pin power connector
• Data transfer rate up to 5 Gb/s
• Backwards compatible with USB 2.0 and USB 1.1.
However, the higher data transfer rate of 5 Gb/s cannot then be achieved
• PCI Express x1
• Supports PCI Express 2.0
System requirements
• Windows XP/Vista/7/7-64, Linux from 2.6
• PC with one free PCI Express slot
• Power supply unit with one free Molex power connector
Package contents
• PCI Express card USB 3.0
• Low profile trim
• CD driver
• User manual
- 3 external, 1 shared internal FireWire 400 port with support for data transfer rates of up to 400 Mbps
- Complies with IEEE 1394a - 2000 and 1394-1995 standards
- With low profile slot plate
- Plug and play and hot-swap compatible
With this 1394-port PCI 4 FireWire adapter card (3 external/1 internal), you can connect iPods, MP3 players, mobile drives, digital camcorders, etc. to your desktop computer.
The FireWire adapter card supports hot swap. This makes it easy to connect, disconnect, and replace FireWire peripherals.
The 4-port PCI FireWire adapter card is suitable for both PCs and Macs. In addition, the adapter has both standard and low profile/half height slot plates for adaptation to slim or compact system applications.
Please note: If you need digital video editing software, we offer you a complete FireWire set with the ST PCI1394_4 card. This software is only compatible with Windows operating systems.
WHQL certified - designed to work on Microsoft Windows XP"
Fan-out cable
The approximately 45 cm long fan-out cable provides a high degree of flexibility at the eight RS-232 ports and simplifies the handling of computers, machines, facilities etc.
Specification
• Connectors:
external:
1 x DB62 female
connecting cable: DB62 male > 8 x serial RS-232 DB9 male
internal:
1 x PCI Express x1, V1.1
• Chipset: SystemBase 16C1058PCI
• Compatible with 16C550 UART
• Data transfer rate up to 921.6 Kbps
• FIFO: 8 x 256 byte
• Databits: 5, 6, 7, 8
• Stop bits: 1, 1.5, 2
• Parity: even, odd, none, mark, space
• Flow control: none, hardware RTS / CTS, software XON / XOFF
• Operating temperature: 0 °C ~ 70 °C
• Cable length incl. connectors: ca. 45 cm
• Dimensions (LxWxH): ca. 93 x 78 x 12 mm
System requirements
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC with one free PCI Express slot
Package content
• PCI Express card
• 1 serial connecting cable
• Driver CD
• User manual
Package
• Retail Box
- Supports RAID 1, 0, JBOD and backup
- Two independent SATA 6G channels
- One SATA 6G channel can be used externally, if desired
- 600 MB/s data transfer rate
- Corresponds to the low profile specification
- RAID Monitor with email notification in the event of an error
- Bootable using its own flash ROM with integrated UEFI and conventional (legacy) BIOS
- Bootable and compatible with Windows 11
- Supported operating systems: All Windows versions starting with Windows 2000, including Windows 11/Server 2022 (32 bit and 64 bit)
Controller cards REICHELT IE Best Products
- Two internal/external switchable SATA ports
- Complies with SATA revision 3.0 for bandwidth up to 6 Gbit/s.
- Support for SATA-based optical drives (CD/DVD/BD)
- Uses existing SATA I/II cables
- Supports native command queuing (NCQ) and ATA/ATAPI commands
With the PCI Express SATA III Controller Card (6 Gb/s) PEXESAT322I, you can add 2 internal or external SATA ports to your computer through a single PCI Express card slot (x1). The card has a jumper selection that allows you to configure the card for 2 internal or external SATA III ports, or one internal and one external port each.
The SATA III card provides port multiplier (PM) support for each port, allowing multiple drives to be connected via a single cable to maximize the number of SATA device connections while reducing the amount of cables required.
The card is fully compliant with the SATA revision 3.0 specification (up to 6 GB/s data bandwidth), so you can take advantage of the speed of high-performance hard drives and solid-state drives (SSD) and SATA-based optical drives (CD-ROM, DVD-ROM, Blu-Ray)."
- 4 external USB 2.0 ports and 3 internal USB 2.0 ports/headers
- Complies with high speed USB 2.0 specifications with support for data transfer rates up to 480 Mbit/s
- Backwards compatible with USB 1.1/1.0 devices
This PCI USB card enables you to add 7 USB 2.0 ports (1 internal USB-A socket, 2 internal USB motherboard headers and 4 external USB-A sockets) to your PCI-enabled PC.
The PCI USB 2.0 card is a versatile solution that allows you to add USB 2.0 ports to upgrade your system motherboard.
This PCI USB card is a complete solution that supports USB 2.0 device ports for full data transfer rates of up to 480 Mbit/s and is backwards compatible with USB 1.1 devices (maximum data transfer rate of 12 Mbit/s) so you can connect any USB device to your computer without compatibility issues."
Specification
- Connector:
2x USB 3.0 Typ A Socket
internal:
2x SATA 6 Gb/s 7 pin female
1x SATA 15 Pin power connector
1x PCI Express x1, V2.0
- chipset: Asmedia
- Data transfer raten:
SATA up to 6 Gb/s
- Supports xHCI specification V1.0
- Power supply via PCI Express interface or via SATA power connector
- Pin Header für LED zur indicator der SATA Verbindung
- Supports Native Command Queuing (NCQ)
- Supports SATA Hot Plug
System requirements
- Windows Vista/Vista-64/7/7-64/8/8-64/8.1/8.1-64, Linux Kernel 3.7
- PC with one free PCI express slot
Package content
- PCI Express card
- Low profile bracket
- Driver CD
- User manual
Packagewhite Box"
RAID
When using more than one SATA port, there is the possibility to use different RAID modes.
Technical details
- Connectors:
2 x SATA 6 Gb/s 7 pin plug
1 x PCI Express x1, V2.0
2 x 2 pin pin header for LED - Chipset: Asmedia ASM1061R
- Supports RAID 0, 1, SPAN
- Supports Native Command Queuing (NCQ)
- Supports S.M.A.R.T.
- Supports TRIM
- Supports DevSleep
- Hot Swap
- Bootable
System requirements
- Linux Kernel 3.3 or above
- Windows 7/7-64/8.1/8.1-64/10/10-64/11
- PC with one free PCI Express slot
Package content
- PCI Express card
- Low profile bracket
- LED cable
- Driver CD
- User manual
Package
- Retail Box
- HIGH PERFORMANCE: the USB 3.1 Gen 2 or USB 3.2 Gen 2x 1 PCIe add-on card supports multiple inputs and delivers maximum bandwidth even when connecting devices at different speeds, 10 Gbps per port, 1x USB-A and 1x USB-C
- POWER SUPPLY: expansion card with SATA power supply, additional power supply to the USB ports (if the power supply to the motherboard is insufficient) with up to 5 V 3 A/15 W via the USB-C connector and 5 V 0.9 A/4.5 W via the USB-A connector
- MAXIMUM PERFORMANCE WITH USB DEVICES: 2-port USB-A and USB-C PCIe card adapters support UASP (USB attached SCSI Protocol) and optimise USB performance with external storage devices such as SSD, HDD and NVMe drives
With this USB-3.1 card, you add a USB-C port and a USB-A port to your computer through a PCI Express slot. It allows you to expand your current system by adding two USB 3.1 Gen 2 ports."
- 2 external 9-pin FireWire-800 ports with support for data transfer rates up to 800 Mbps
- 1 external 6-pin FireWire-400 port with supported transfer rates up to 400 Mbps
- compliant with PCI Express Mini Card specification 1.2
- optional external power support for high-powered FireWire devices
- compliant with IEEE 1394b and backward compatible with IEEE 1394a - 2000 as well as 1394-1995 standards
Add 2 FireWire-800 and 1 FireWire-400 port through a Mini PCI Express slot
The MPEX1394B3 3-Port Mini PCI Express FireWire Card is a PCI Express to FireWire-800/FireWire-400 adapter that enables you to add external FireWire connectivity on very small form factor or embedded systems.
The PCIe FireWire card provides two FireWire-800 ports and one FireWire-400 port, this adapter card supports the latest external FireWire storage devices at data transfer speeds of up to 800 Mbps.
Using the Mini PCI Express (Mini Card) form factor, this adapter card is designed for use in the latest very small form factor computer systems, such as Mini-ITX or custom embedded solutions where a full-sized PCI Express card would not fit."
Technical data
- Internal connectors: 4 x 67 Pin M.2 Key B Slot, 1 x PCI Express x4
- Chipset: Marvell 88SE9230
- Interface: SATA
- supports M.2 modules in format 2280, 2260, 2242 and 2230 with Key B or Key B+M on SATA basis
- maximum height of components on the module: 1.5 mm, use of double-sided modules possible
- data transfer rate up to 6 Gb/s
- supports RAID 0, 1, 10
System requirements
- Windows 8.1/8.1-64/10/10-64, Linux Kernel 2.6 and higher
- PC with one free PCI Express x4 / x8 / x16 / x32 slot
Package contents
- PCI Express card
- Driver CD
- Instruction manual
Packing
- Box
- Supports RAID 1, 0, JBOD and backup
- Two independent SATA 6G channels
- 600 MB/s data transfer rate
- Corresponds to the low profile specification
- RAID Monitor with email notification in the event of an error
- Bootable using its own flash ROM with integrated UEFI and conventional (legacy) BIOS
- Bootable and compatible with Windows 11
- Supported operating systems: All Windows versions starting with Windows 2000, including Windows 11/Server 2022 (32 bit and 64 bit)
- USB 3.2 Gen 1 PCIe card with four external ports
- Compatible with Microsoft Windows standard open HCD driver
- Supports up to 123 devices
- Fully compliant with PCI Express Gen 2 specifications
- Backward compatible with USB 1.1 and 2.0
- Hot Swapping
- Plug-and-Play
- Chip set: VIA VL805
The EX-11044 USB 3.2 Gen 1 PCIe card provides four external super-speed USB 3.2 Gen 1 ports. It was developed to connect several USB 1.1, 2.0 or 3.2 Gen 1 devices to your workstation, desktop or server. It supports USB 1.1 low-speed (1.5 Mbps), full-speed (12 Mbps), USB 2.0 high-speed (480 Mbps) and USB 3.2 Gen 1 super-speed (5 Gbps). It is the perfect technology for external storage housings, digital cameras, webcams, scanners and more. The EX-11044 comes with a low profile bracket for installation in slim enclosures with a maximum height of 8 cm.
- Category: USB cards
- Interface: USB 3.2 Gen 1
- Ports: A-socket
- Number of ports: 4
- Bus system: PCIe
- Design: standard and low profile
- USB 3.2 Gen 2x2
- Transfer rates up to 20 GBit/s
- USB type C connection
- Low-profile bracket included
With the KC-008 from Argus, you can upgrade your PC to the latest USB standard in no time at all. The card is simply inserted into a free PCIe x4 port and supplied with a S-ATA power connection from the power supply, then your PC has a USB 3.2 Gen 2x2 type C connection, which can provide a theoretical transfer rate of up to 20 GBit/s."
- 2-channel 16C1050 UART for full compatibility with 16C1050 devices
- Maximum data transfer rate of 460 kbit/s.
- Conforms to PCI Express 1.0a specification, 1 x, 2 x, 4 x, 8 x, And 16 x PCIe bus
- 256-byte FIFO for transmission and reception.
- In-band software flow control with programmable XON/XOFF in both directions
This PCI Express serial card adds two powerful RS232 serial ports to your desktop or server to connect your serial devices and accessories.
Convenient system expansion through PCIe
The serial PCI card can be installed in an available PCI Express slot to provide two powerful 16C1050 RS232 UART serial channels/ports. It provides a convenient solution for connecting modern or older devices to newer computer systems that do not have RS232 ports. The serial card complies with the PCI Express 1.0a specification and is compatible with 1 x, 2 x, 4 x, 8 x, and 16 x PCI Express slots.
The 2-port serial PCIe card is ideal for system expansion in a wide range of applications, including production facilities, POS devices, security devices such as Surveillance cameras, card readers or access covers, and for systems for environmental control or building control.
High-performance serial data transmission
The serial PCIe card provides high-performance serial data transmission and supports data transfer rates of up to 460 kbit/s. The serial card reduces CPU load, which helps to optimize system performance and errors, such as Avoid overflows by protecting resources. The 2-channel UART also guarantees smooth performance even when both parts are used.
Easy To Install
The serial card is easy to install and configure, and supports many Windows® operating systems. It also provides IRQ sharing and supports serial plug-and-play device ports. This ensures a comfortable, effortless installation. A built-in standard profile bracket and an optional low profile bracket are included."
Specification
• Connector:
internal:
2 x 67 pin M.2 NGFF key B slot
2 x SATA 7 pin female (for modules based on SATA)
1 x 9 pin USB 2.0 pin header (for modules based on USB)
1 x PCI Express x1 (only for power supply)
• Interface: SATA / USB
• Supports M.2 NGFF modules in format 22110, 2280, 2260, 2242
and 2230 with key B or key B+M based on SATA or USB
• Maximum height of the components on the module: 1.35 mm
application of double-sided assembled modules supported
• Bootable (SATA)
• Data transfer rate up to 6 Gb/s
• OS independent, no driver installation necessary
System requirements
• PC with one free PCI Express slot
Package content
• PCI Express card
• Low profile bracket
• 2 x fixing screw
• 2 x SATA data cable
• 1 x USB pin header cable
Package
• Box
The EX-41384 PCI I/O card provides four serial RS232 High Performance UART 16C1050 outputs. It has been developed to expand four additional serial ports for PC, small workstation or server via the PCI or PCI-X bus. The board is fully plug-and-play compatible and supports Linux and SCO-Unix. The EX-41384 can also be installed in a low profile computer case with a maximum height of 8cm. In addition, +5V or +12V can be configured on pin 9 of the serial connector for a POS system (Power over System).
- Interface: RS232 V.24
- FIFO Buffer: 16C1050 with 256Byte
- ±15kV IEC1000-4-2 ESD protection for RS232 I/OS
- I/O addresses and interrupt are assigned by the system BIOS, IRQ Sharing
- Data Bits: 5, 6, 7, 8
- Stop Bits: 1, 1.5, 2
- Parity: none, even, odd, space, mark
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Flow Control RTS/CTS, XON/XOFF
- Supports 5V and 3.3V boards
- +5V or +12V can be set to pin 9 of all four connectors
Drivers: See Operating Systems
Operating system: Win 2000/XP/Vista/7/8.x/10 (32&64) Server 200x, SCO-Unix, Linux 2.4 or higher
Scope of delivery: EX-41384, Octopus cable, LP bracket, CD, manual"
Specification
- Connector: 1 x 59 pin M.2 key B+M male > 2 x 19 pin USB 3.0 pin header male, 1 x 4 pin pin header power connector (optional for power supply)
- Chipset: Renesas
- Interface: PCIe
- Form factor: M.2 2280 (2260)
- suitable for M.2 slot with key M or B+M based on PCIe
- Data transfer rate up to 5 Gbps
- bootable
- Dimensions (LxWxH): ca. 82 x 22 x 14 mm
System requirements
- Windows 7/7-64/8.1/8.1-64/10/10-64, Linux Kernel 3.16
- one free M.2 key M slot
Package content
- Converter
- Power cable
- Driver CD
- User manual
Package
- Retail Box
Specification
- Connectors:
16 x SATA 6 Gb/s 7 pin plug
1 x PCI Express x4, V3.0
16 x 2 pin pin header for LED
1 x 2 pin pin header for fan (12 V) - Chipset: Asmedia ASM1064, ASM2806
- Supports Native Command Queuing (NCQ)
- Supports S.M.A.R.T.
- Supports TRIM
- Supports DevSleep
- Bootable (CN1 - CN6)
System requirements
- Linux Kernel 5.8 or above
- Windows 8.1/8.1-64/10/10-64
- Windows Server 2019
- PC with one free PCI Express slot
Package content
- PCI Express card
- User manual
Package
- Retail Box
The A/V Extension Over Cat. 5 VE170 consists of the VE170T transmitting unit and the VE170R or 70RQ receiver unit and is a cost-effective and efficient solution for transmitting high-quality picture and sound signals.
Simply connect both devices via a conventional Cat. 5 network cable and place the monitors up to 300 m away from the transmitting unit or signal source.
The VE170R and VE170RQ receivers are also compatible with ATEN's A/V Over Cat 5 graphics splitters.
VE170R
- Video output: 1 x HDB-15 socket (blue)
- Impedance: 75 ohms
- Max. bandwidth: 300 MHz
- Max. resolutions / distance: up to 1920 x 1200 at 30 m, 1024 x 768 at 300m
- Audio output: 1 x mini stereo jack (green)
- Power supply: 1 x DC connection
Receiver unit:
- VE170R Audio-Video receiver Over Cat 5
Included in delivery:
- 1x VE170R
- 1x 0AD6-1605-09EG power supply unit
- 1x mounting kit (1 pc.)
- 1x user manual
The EX-11072 USB 3.2 Gen 1 PCIe card (previously called USB 3.0) provides 2 external and 2 internal SuperSpeed USB 3.2 Gen 1 ports. It is designed to connect 4 additional USB 1.1, 2.0 or 3.0 devices to your workstation, desktop or server, and supports USB 1.1 low-speed (1.5 Mbps), full-speed (12 Mbps), USB 2.0 high-speed (480 Mbps) and USB 3.2 Gen 1 super-speed (5 Gbps). To support the 900 mA current on the external or internal USB 3.2 Gen 1 port, you will need the power connection from the PC power supply unit. The internal 20-pin header USB 3.2 Gen 1 connector is motherboard-compatible. Includes adapter kit with 2x USB 3.2 Gen 1 sockets.
- Compatible with USB 3.2 Gen 1 and Intel xHCI specifications
- Supports all USB-compatible data transmission types, such as Control/Bulk/Interrupt/Isochronous
- Supports up to 123 devices
- Compatible with PCI Express Gen2 specifications
- Supports ""hot swapping"" and ""plug-and-play""
- Chip set: Renesas uPD720202
Included in delivery:
EX-11072, 3.5"" adapter kit, standard bracket, LP bracket, driver CD, manual"
With a 32-bit Arm® Cortex®-M4 CPU running at 64 MHz, this board offers Bluetooth® LE capabilities for seamless data sharing with other Bluetooth® LE enabled devices.
Additionally, it supports MicroPython for increased programming flexibility.
What is the difference between Rev1 and Rev2?
There have been some changes to the sensors, components and PCB design to improve the user experience:
• Replacement of the IMU LSM9DS1 (9-axis) with a combination of two IMUs (BMI270 - 6-axis IMU and BMM150 - 3-axis IMU).
• Replacement of the MPM3610 power supply with MP2322
• V USB solder jumper on the top of the board
• new test point for USB, SWDIO and SWCLK
Specifications
• I/O voltage: 3.3 V
• input voltage (nominal): 5-18 V
• DC current per I/O pin: 10 mA
• Microcontroller nRF52840, 64 MHz
• Memory: 256 KB SRAM, 1 MB Flash
• Micro USB connector
• built-in LED pins: 13
• digital I/O pins: 14
• analog input pins: 8
• PWM pins: All digital pins (4 simultaneously)
• external interrupts: All digital pins
• Bluetooth®: u-blox® NINA-B306
• IMU: BMI270 (3-axis accelerometer + 3-axis gyroscope) + BMM150 (3-axis magnetometer)
• UART): RX/TX
• I2C: A4 (SDA), A5 (SCL)
• SPI: D11 (COPI), D12 (CIPO), D13 (SCK)
• Dimensions (LxW): 45 x 18 mm
Note: This board is supplied without an integrated header.
- Compatible with 12 Gbit/s SAS drives and backwards compatible with 6 Gbit/s SAS and SATA drives
- Equipped with a standard-height installation clamp set and a half-height slot bracket for installation in computers with a small form factor
This Mini-SAS adapter allows you to convert two internal SFF-8643 ports on a controller card to two external SFF-8644 ports. For example, you can connect external SAS or SATA drives in direct attached-storage (DAS) devices to an internal back plate or SAS controller for additional storage.
The adapter can be connected to up to eight drives and is compatible with 12 Gbit/s SAS drives and 6Gbit/s SATA drives. The adapter is easy to install and can be mounted in any new or older desktop expansion slot, including PCI, AGP and PCIe. Full-profile and low-profile mounting brackets are provided to ensure compatibility with most computer cases."
- HIGH PERFORMANCE: Expand your computer or server with two SATA III 6-Gbit/s ports via PCI Express x2 slot to connect SATA drives (HDD/SSD). 6 Gbit/s per port, integrated RAID hardware controller to relieve the load on the CPU
- VERSATILE HARDWARE RAID CONFIGURATIONS: The PCIe card supports RAID hardware: RAID 0/1/span (Big Disk) The card can be used without RAID in JBOD (Just a Bunch of Disks) and supports HDD/SSD and optical drives (Blu-Ray/DVD/CD ROM/RW)
- COMPATIBILITY: PCIe 2.0 Plug and play on Windows(7+), MacOS(10.10+), Linux(2.6.32+) Operating system boot on Windows and Linux for RAID configuration on BIOS level Windows app for RAID configuration and monitoring RAID software only on MacOS
- APPLICATIONS: Installation in the PCIe slot (full profile installed, low profile included) Ideal for laboratories, CAD or audio/video workstations, databases and schools Upgrading computer systems with RAID hardware and SATA 6-Gbit/s
Specification
- Connectors internal: 1 x 67 Pin M.2 Key M Slot, 1 x PCI Express x4, V4.0
- Interface: PCIe
- supports M.2 modules in 22110, 2280, 2260, 2242 and 2230 format with Key M or Key B+M on PCIe basis
- maximum height of components on the module: 1.5 mm, use of double-sided modules possible
- supports NVM Express (NVMe)
System requirements
- Windows 7/7-64/8-64/8.1/8.1-64/10/10-64, Linux Kernel 3.19
- PC with one free PCI Express x4 / x8 / x16 / x32 slot
Package contents
- PCI Express card
- Low profile bezel
- 1 x mounting screw
- User manual
Packing
- Retail Box
- HIGH PERFORMANCE: the 2-port USB PCIe card with ASMedia ASM3142 host controller (PCIe 3.0 x 4) has two SuperSpeed 10 Gbps USB-A ports (USB 3.1 Gen 2/USB 3.2 Gen 2 x 1), speeds up to 10 Gbps per port, updated version of our popular PEXUSB312A2 USB card
- MAXIMUM USB PERFORMANCE: the add-on card supports multiple inputs for maximum bandwidth when using devices at different speeds, supports UASP and optimised for SSDs/HDDs, NVMe, USB sticks, supports USB 3.0/2.0 devices
- POWER SUPPLY: the USB PCI Express 3.0 expansion card with SATA power header additionally supplies the USB ports with power (if the motherboard's power supply is insufficient) and provides up to 4.5 W (5 V at 0.9 A) per USB-A port
This PCIe USB 3.2 Gen 2 interface card plugs into a free PCI Express x4 slot in your computer, allowing you to upgrade your current system by adding two SuperSpeed USB-A (10 Gbps) ports."
