Best Computer case accessories Products REICHELT IE

Home > Computer case accessories > REICHELT IE > Computer case accessories REICHELT IE

REICHELT IE: Computer case accessories

The Best

DIGITUS "DIGI DN-19 SET - Fixing set for 483 mm (19'') and 254 mm (10"") components, M6" 21.27 EUR "Fixing set for 483 mm (19'') and 254 mm (10"") components, M6

Set of 50 pieces of screws, cage nuts and washers in the size M6

The DIGITUS® mounting kit includes a set of 50 pieces of screws, cage nuts and washers in the size M6. Suitable for rack mountable components.

Technical details

Steel
Screws
Caged nuts
Set = 50 sets
Color black

Package content:

50 x screws, washers, cage nuts

SEE OFFER

Top Pick

DIGITUS 19ORG1SW - Cable management bracket 44 x 60 mm, 10 pieces 30.57 EUR "1U cable management ring, 44x60 mm 10 pieces, color black (RAL 9005)

The cable management brackets ensure order in your 483 mm (19"") cabinet

The cable management brackets keep your 483 mm (19"") cabinet tidy. The robust sheet steel construction offers a flexible and optimal solution for structured cabling. The scope of delivery includes 10 cable guide rings and the required fastening material.

Technical details

Color: black, RAL 9005
for mounting on the 483 mm (19"") profile rails
Available in three different sizes
Robust sheet steel
incl. mounting material

Scope of delivery:

Installation set (screws, cage nuts, washers)

SEE OFFER

Excellent

KOLINK 03811 - Kolink ARGB 3-pin extension cable, 50 cm 15.01 EUR "The extension cable is used to extend a D-RGB source and allows a visually appealing lighting system to be installed in the enclosure. It is equipped with standard 3-pin addressable RGB headers and male to female connectors.

The cable can be used with all common 3-pin 5-V RGB controllers as well as with the RGB headers of leading motherboard manufacturers. To ensure that it is connected correctly, the arrow mark on the LED connector should be aligned with the +5-V mark on the D-RGB header.

Technical details:

Length: 500 mm
Colour: black
Connections:

3-pin (+5-V, data, blocked, ground, plug/socket)

SEE OFFER

Recommended

LIAN O11DMINI-1W - Lian Li mini riser card + PCI bezel, PCIe 4.0, 200 mm, white 68.76 EUR With this conversion kit, consisting of a riser cable and a PCI slot bezel, a graphics card can be installed vertically in the Lian Li O11 Dynamic Mini Midi Tower. To do this, the slot covers on the modular back of the Lian Li O11 Dynamic Mini are removed and replaced with the slot covers supplied in the kit. The riser cable supports PCIe 4.0.

SEE OFFER

Featured

STARTECH.COM ST PLATEBLANK - Expansion Slot Cover Plate - 10 Pack 19.15 EUR "

Full Profile/Standard height design
Metal construction

Add a cover for an exposed full profile expansion card slot
This 10-pack of expansion slot covers is great to have on hand for new system builds or computer upgrades."

SEE OFFER

Alternative

STARTECH.COM ST CPUMOBILESTND - PC stand, CPU stand on wheels 60.08 EUR "

ROLLING PC STAND: This mobile computer stand provides full access to the front and back of the PC tower while providing free air circulation, anti-slip pads prevent damage to the computer case, robust steel construction
TOOL-FREE ADJUSTMENT: The width of the CPU stands can be easily adjusted with wing nuts (bottom), tool-free adjustment from 125 to 208 mm allows the CPU holder to be adapted to different housing sizes (even UPS batteries)
SPACE-SAVING: Use this trolley to increase work space by placing the PC tower on the floor or under a desk, the wheels on the CPU holder provide easy placement and brakes secure it in place, load capacity 21 kg
EASY ACCESS AND INSTALLATION: Easy access to drive bays, peripherals and cables of the PC when mounted on the computer stand, fast installation with only three main components, all required parts included

SEE OFFER

LIAN A3-1X - Lian Li DAN A3-mATX cases, vertical graphics card holder, black 61.53 EUR Enhance your gaming setup with this black vertical GPU kit! This kit includes a riser cable and PCI slot bracket that allow you to easily install your graphics card vertically in the Lian Li DAN A3-mATX housing. Take your PC setup to a new level and stylishly present your powerful GPU to enhance the aesthetics of your setup.

Note: This vertical GPU kit is only compatible with the Lian Li DAN A3-mATX housing.

SEE OFFER

AKASA RPIC RA10-M2B - Housing for Raspberry Pi 4B, aluminum, black 16.82 EUR "The Akasa Maze Pro is a high-quality aluminum case that has been specially developed for the Raspberry Pi 4 Model B. With its gemstone-like design in matt black, it not only offers an attractive appearance, but also efficient passive cooling thanks to the integrated high-performance thermal kit. This housing is ideal for commercial system applications such as digital signage, smart buildings and robotics.

High-performance thermal kit: Customized thermal kit with heat sink cover for efficient heat dissipation of GPU and USB 3.0 chipset
Optimum thermal performance: The aluminum housing ensures efficient heat dissipation and guarantees optimum operation, even under high loads
Concealed SD card slot and GPIO: Ideal for commercial system applications to prevent unauthorized access
Support for dual micro HDMI: Enables the connection of two displays
Wi-Fi signal window: Special window to ensure Wi-Fi and Bluetooth connectivity

Technical specifications

Material: black, sandblasted, anodized aluminium
Compatibility: Raspberry Pi 4 Model B
Dimensions (LxWxH): 96 x 75.6 x 34.3 mm

The Akasa Maze Pro aluminium case (model A-RA10-M2B) combines an attractive design with efficient passive cooling and practical features to optimally protect your Raspberry Pi 4 Model B and maximize its performance. It is particularly suitable for commercial applications where both aesthetics and functionality are required."

SEE OFFER

LIAN A3-2W - Lian Li DAN A3-mATX cases, left side panel, white 23.28 EUR "This left tempered glass side panel features a slim white frame that completes the aesthetics of your Lian Li DAN A3-mATX housing. Upgrade your PC build quickly and easily with this stylish and durable panel. Present your hardware in style and add a touch of sophistication to your setup. Turn your PC into a visual masterpiece with this tempered glass side panel.

Colour: white
Materials: tempered glass, steel
Compatibility: Lian Li DAN A3-mATX cases

SEE OFFER

LIAN O11DE-3XV2 - Lian Li optional USB module for O11DEX, O11DERGB-X 30.52 EUR Extra connectors for your Lian Li housing: the Lian Li I/O kit for O11 dynamic EVO RGB

Have you chosen the Lian Li O11 dynamic EVO RGB and need more connectors on your housing? Then the Lian Li I/O kit gives you everything you need.

With this conversion kit, you get an additional I/O panel. There are three different placement options on the bottom of the case - without the need for tools. This modular I/O panel has two USB 3.0 ports and one USB Type-C port.

SEE OFFER

"SYNOLOGY DH-C - Synology NAS accessories 2.5"" hard disk holder" 21.27 EUR "- only for the following DiskStation models:
DS211, DS210+, DS209+II (S/N: **GCN*****), DS209 (S/N: **G4N*****), DS212j, DS211j, DS210j, DS112+, DS112, DS112j, DS111, DS110+, DS110j, DS109+, DS109, DS109j, DS213air

The 2.5"" hard disk holder from Synology offers users an easy way to provide your Synology NAS with 2.5"" HDDs or SSDs.
When 2.5"" HDDs are installed, the Synology NAS benefits from a quieter library, lower power consumption and higher reliability compared to their 3.5"" HDD counterparts."

SEE OFFER

LIAN A3-1W - Lian Li DAN A3-mATX cases, vertical graphics card holder, white 61.53 EUR Enhance your gaming setup with this white vertical GPU kit! This kit includes a riser cable and PCI slot bracket that allow you to easily install your graphics card vertically in the Lian Li DAN A3-mATX housing. Take your PC setup to a new level and stylishly present your powerful GPU to enhance the aesthetics of your setup.

Note: This vertical GPU kit is only compatible with the Lian Li DAN A3-mATX housing.

SEE OFFER

GOOBAY 93990 - Mounting frame 3.5 to 2.5, black 12.52 EUR "suitable for the installation of a 2.5"" HDD in a 3.5"" housing slot

supports any 2.5"" HDD/SSD hard drive
high-quality material and uncomplicated assembly
exact fit usable

Technical data
GeneralPackaging type: Bulk
Unit of consumption: 1 pcs. in plastic bag
Colour: Black
Width: 100 mm
Height: 10 mm
Depth: 100 mm
Weight: 60 g"

SEE OFFER

LIAN O11DEXL-1X - Lian Li upright GPU bracket, black 18.12 EUR Have you chosen the Lian Li O11 dynamic EVO XL in black and would like to install your graphics card upright? Then you get everything you need with this Lian Li O11DEXL-1X GPU bracket. All you have to do is get the right riser cable, such as the 90-cm PW-PCIV-4-90 PCIe 4.0 riser cable from Lian Li in black or white.

This conversion kit, consisting of a PCI slot holder and mounting accessories, allows you to install your graphics card in a vertical position. With this design, the graphics card is located next to the mainboard and therefore there is more space in the main chamber, for example for hoses and pumps of a water cooling system. It also makes it easier to present the graphics card. The PCI slot holder can accommodate graphics cards with up to four slots.

Note: Riser cable not included.

SEE OFFER

JNB 50725 - Jonsbo VC-1 GPU holder, black 23.28 EUR The Jonsbo VC-01 graphics card holder provides flexible support for up to two extra-long graphics cards. It can be positioned freely in the enclosure and consists of a stable base with a magnetic, non-slip underside. Up to two 125-mm rods can be screwed on top of each other in the base. The rubberised holders are attached to these at any height and securely fixed in place - two pieces are included in the scope of delivery.

Made from a high-quality aluminium-magnesium alloy and sandblasted black, the VC-01 boasts a low weight of just 150 grams while offering high stability. Even heavy high-end graphics cards with water cooling are reliably held in a horizontal position. The Jonsbo VC-01 reliably prevents potential long-term damage that could result from sagging or bending of large pixel bolts.

SEE OFFER

LIAN O11DE-9W - Lian Li GPU bracket, white 20.18 EUR "The Lian Li O11DE-9W GPU bracket allows you to mount your RTX 4000 series graphics card vertically into your Lian Li O11. This allows you to maintain a clean look and also improve temperatures in your housing. The GPU bracket is compatible with most NVIDIA 40 series graphics cards and is designed for use with the Lian Li O11 housing.

Dimensions: Mounting frame: 115.8 x 50 x 158.8 mm (W x H x D)
Support frame: 70 x 10 x 81 mm (W x H x D)
Material: steel
Colour: white
Included in delivery:
1x Lian Li O11DE-9W GPU bracket, white
1x fasteners
Compatibility:
ASUS TUF 4090/ROG STRIX 4070Ti/GIGABYTE Gaming OC 4080/GIGABYTE Windforce 4090/AORUS Master 4070Ti/MSI Suprim 4090/MSI GAMING X 4080/PALIT Gamerock 4090/NVIDIA 4090

SEE OFFER

BEQUIET BQT BGA03 - Window Side Panel Pure Base 600 36 EUR The high-quality and fully-windowed side panel fits all Pure Base 600 cases and gives you a perfect view of the components inside your PC. The window is made of 4mm tinted and tempered glass, and is decoupled from the case with rubber elements to inhibit the transfer of vibrations.

SEE OFFER

LOGILINK EO0004 - CPU mount, rotatable, slidable 38.84 EUR Designed for mounting the computer under the desk to save more space in the work area and to protect the device as much as possible from dust. With the adjustable support arm, the holder is suitable for many PCs and its rotatability ensures a maximum flexibility under the desk.

Fits CPUs with up to 10 kg
Sturdy and simple design
360° rotatable
Adjustable size - Height: 300-533 mm, width: 88-203 mm
Sliding mechanism for greater accessibility (sliding range: 325 mm)
Easy mounting under the table

SEE OFFER

Computer case accessories REICHELT IE Best Products

ROLINE 16013009 - Mounting frame 3.5 to 2.5, metal 15.65 EUR "3.5"" mounting adapter for a 2.5"" HDD/SSD - frame made of black metal for stable support of your 2.5"" hard disks in the PC/industrial enclosure!

For installing a 2.5-inch HDD/SSD in a 3.5-inch bay
Stable black metal frame
Mounting screws included in delivery