Computer case accessories
The Best
DIGITUS "DIGI DN-19 SET - Fixing set for 483 mm (19'') and 254 mm (10"") components, M6"
21.27 EUR
"Fixing set for 483 mm (19'') and 254 mm (10"") components, M6- Set of 50 pieces of screws, cage nuts and washers in the size M6
The DIGITUS® mounting kit includes a set of 50 pieces of screws, cage nuts and washers in the size M6. Suitable for rack mountable components.
Technical details
- Steel
- Screws
- Caged nuts
- Set = 50 sets
- Color black
Package content:
- 50 x screws, washers, cage nuts
Top Pick
DIGITUS 19ORG1SW - Cable management bracket 44 x 60 mm, 10 pieces
30.57 EUR
"1U cable management ring, 44x60 mm 10 pieces, color black (RAL 9005)- The cable management brackets ensure order in your 483 mm (19"") cabinet
The cable management brackets keep your 483 mm (19"") cabinet tidy. The robust sheet steel construction offers a flexible and optimal solution for structured cabling. The scope of delivery includes 10 cable guide rings and the required fastening material.
Technical details
- Color: black, RAL 9005
- for mounting on the 483 mm (19"") profile rails
- Available in three different sizes
- Robust sheet steel
- incl. mounting material
Scope of delivery:
- Installation set (screws, cage nuts, washers)
Excellent
BEQUIET BQT BGA03 - Window Side Panel Pure Base 600
36 EUR
The high-quality and fully-windowed side panel fits all Pure Base 600 cases and gives you a perfect view of the components inside your PC. The window is made of 4mm tinted and tempered glass, and is decoupled from the case with rubber elements to inhibit the transfer of vibrations.
Recommended
ROLINE 16013009 - Mounting frame 3.5 to 2.5, metal
15.65 EUR
"3.5"" mounting adapter for a 2.5"" HDD/SSD - frame made of black metal for stable support of your 2.5"" hard disks in the PC/industrial enclosure!- For installing a 2.5-inch HDD/SSD in a 3.5-inch bay
- Stable black metal frame
- Mounting screws included in delivery
Featured
KOLINK 03774 - Kolink Inspire L1 ARGB LED strip, 30 cm
23.35 EUR
This ARGB LED strip from Kolink provides customised lighting for your setup. The 30-cm strip features 15 bright 5050 LEDs, which emit light at a 120° angle. With a 3-pin connector and a socket at the ends, it can be daisy-chained with additional strips.It can be installed using the integrated magnets or the adhesive strip provided. A 3-pin adapter cable allows connection to standard motherboard headers or controllers, and a Y-adapter for additional ARGB components is included. The lighting can be synchronised using software such as GIGABYTE RGB Fusion, ASRock Polychrome Sync, ASUS Aura Sync, MSI Mystic Light and Razer Chroma.
Alternative
AKASA RPIC RA10-M2B - Housing for Raspberry Pi 4B, aluminum, black
16.82 EUR
"The Akasa Maze Pro is a high-quality aluminum case that has been specially developed for the Raspberry Pi 4 Model B. With its gemstone-like design in matt black, it not only offers an attractive appearance, but also efficient passive cooling thanks to the integrated high-performance thermal kit. This housing is ideal for commercial system applications such as digital signage, smart buildings and robotics. - High-performance thermal kit: Customized thermal kit with heat sink cover for efficient heat dissipation of GPU and USB 3.0 chipset
- Optimum thermal performance: The aluminum housing ensures efficient heat dissipation and guarantees optimum operation, even under high loads
- Concealed SD card slot and GPIO: Ideal for commercial system applications to prevent unauthorized access
- Support for dual micro HDMI: Enables the connection of two displays
- Wi-Fi signal window: Special window to ensure Wi-Fi and Bluetooth connectivity
Technical specifications
- Material: black, sandblasted, anodized aluminium
- Compatibility: Raspberry Pi 4 Model B
- Dimensions (LxWxH): 96 x 75.6 x 34.3 mm
The Akasa Maze Pro aluminium case (model A-RA10-M2B) combines an attractive design with efficient passive cooling and practical features to optimally protect your Raspberry Pi 4 Model B and maximize its performance. It is particularly suitable for commercial applications where both aesthetics and functionality are required."
GOOBAY 93990 - Mounting frame 3.5 to 2.5, black
12.52 EUR
"suitable for the installation of a 2.5"" HDD in a 3.5"" housing slot- supports any 2.5"" HDD/SSD hard drive
- high-quality material and uncomplicated assembly
- exact fit usable
Technical data
GeneralPackaging type: Bulk
Unit of consumption: 1 pcs. in plastic bag
Colour: Black
Width: 100 mm
Height: 10 mm
Depth: 100 mm
Weight: 60 g"
STARTECH.COM ST 2NS-CPU-WALL - PC wall bracket, desk bracket
102.87 EUR
"- DESKTOP WALL BRACKET: Made from thick powder coated steel, this heavy duty wall bracket for PCs supports enclosures up to 18 kg, rubber spacers prevent damage to the enclosure and keep it stable and safe in the mount
- TOOL-FREE ADJUSTMENT: Quick adjustment of the width of the PC wall bracket via the rotary knobs, tool-free adjustment of the CPU holder from 5 to 20 cm to adapt to different computer sizes/UPS battery fuses
- SECURE AND FIRM MOUNTING: Including self-adhesive rubber/foam spacers protect the housing from scratches and prevent slipping, for very narrow CPU housings use the including plastic spacers
- SPACE SAVER: This computer wall mounting system allows you to free up space on your desk or floor by mounting the computer to a nearby wall (concrete/drywall). Alternatively, it can be mounted on the side of the table
- EASY ACCESS: Makes drive bays, peripheral ports and cabling simple to access when mounted on the bracket, quick installation through keyhole fixing, all required parts are included
KOLINK 03965 - Kolink Inspire L2 4-pin 12-V RGB controller, SATA
20.18 EUR
This RGB controller from Kolink allows multiple RGB components to be controlled via daisy chaining. It features various connections for 12-V 4-pin RGB devices and also has ports for Phanteks and Corsair products. The power supply is via SATA.Over 300 colour modes and effects can be configured using the supplied RF remote control. Brightness and settings can be individually adjusted and saved for later use. Able to support up to 120 LEDs, this controller is a versatile and cost-effective solution for controlling conventional RGB lighting.
ROLINE 17031128 - PC bracket, silver
51.73 EUR
"Space-saving PC bracket to create more room on your desk- For PC systems
- Robust steel construction
- Mounted under desktop, screws not included in delivery
- Adjustable mounting height and width
Technical data:
- Load capacity: 30 kg
- Mounting: Under desktop
- Arm length: maximum height 390 x 540 mm
- Technical features: Width 134 - 234 mm
Note: Pictured devices and accessories not included in delivery."
INLINE INL 59909B - Rubber feet for PC enclosures, pack of 4, black
12.84 EUR
Self-adhesive rubber feet for PC enclosures• Pack of 4
• Black
• Diameter: 32 mm
• height: 9 mm
BEQUIET BQT BGA06 - be quiet! HDD slot cover
14.03 EUR
"Tidy interiorMade possible thanks to better cable management
These two HDD slot covers are perfect for covering HDD slots and can be used for cable management in the Dark Base 700 and Silent Base 801/601 housings. The covers can be adjusted for use with different cables in a range of graduations.
- Can be adjusted for use with different cables in a range of graduations
- Is compatible with all Dark Base 700 and Silent Base 801/601 housings
- German product concept, design and quality control
- Packaging dimensions (L x W x H): 138 x 130 x 60 mm
- Packaging dimensions (L x W x H): 430 x 280 x 335 mm
- Gross weight: 0.104 kg
- Units included in delivery: 2
"SYNOLOGY DH-C - Synology NAS accessories 2.5"" hard disk holder"
21.27 EUR
"- only for the following DiskStation models:DS211, DS210+, DS209+II (S/N: **GCN*****), DS209 (S/N: **G4N*****), DS212j, DS211j, DS210j, DS112+, DS112, DS112j, DS111, DS110+, DS110j, DS109+, DS109, DS109j, DS213air
The 2.5"" hard disk holder from Synology offers users an easy way to provide your Synology NAS with 2.5"" HDDs or SSDs.
When 2.5"" HDDs are installed, the Synology NAS benefits from a quieter library, lower power consumption and higher reliability compared to their 3.5"" HDD counterparts."
KKSB CASE 60115 - Case for Raspberry Pi Zero, steel, black
19.46 EUR
The high-quality KKSB case for the Raspberry Pi Zero (all versions) is a 2-piece case made of steel, with walls flexible enough to easily fit the board into the case.- made of high-quality, powder-coated steel
- all important connections still accessible
- easy assembly, no gluing, no modification
- perfect fit for Raspberry Pi Zero
Scope of delivery
- Steel case, complete
- 3x screws
Note
2 holes on the bottom for optional mounting on various surfaces as well as on the KKSB 7 inch display case
STARTECH.COM ST CPUWALLMNT - Adjustable CPU mount
59.05 EUR
"Maximise your work space by wall-mounting your CPU for easy access.- Save space in your work area by keeping your computer out of the way
- Heavy-duty black metal frame holds up to 10 kg
- Easy installation with all hardware needed for set up included
- Extend the life of your computer by keeping it off the ground and away from dirt and dust
- Adjustable width, from 122 mm to 212 mm, fits most computers
THERMAL GRIZZLY TG-WV-H1N - WireView GPU 1x12VHPWR normal
61.59 EUR
"The WireView GPU is a device for measuring the power consumption of graphics cards developed in collaboration with Jon ""elmor"" Sandström. It plugs into the PCIe power connectors on the graphics card and connects to the power supply unit via the PCIe power cables. An OLED display shows the power consumption data.At the same time, the WireView GPU performs a cable management function, as its ""U"" shape allows optimised cable routing. The PCIe power cables are connected to the WireView GPU in such a way that they can be routed neatly over the backplate of the graphics card. This prevents cable bulges when laying the power cables and simplifies cable management.
- Power consumption measurement
- Power consumption recording
- Optimised cable routing
- Simple assembly
- High level of compatibility
STARTECH.COM ST SCREWNUTM - #6-32 to M3 Jack Screw Standoff 50 Pack
24.11 EUR
Install a motherboard into a computer case with #6-32 threaded mounts and M3 screwsThis pack of 50 Metal Jack Screw Standoffs are great to have on hand for new system builds, repairs or upgrades - the ideal solution for mounting any motherboard to your pre-tapped PC chassis.
ROLINE 16013008 - Installation frame 3.5 to 2x 2.5, metal
16.13 EUR
"3.5-inch HDD/SSD mounting adapter for up to 2 2.5-inch HDDs/SSDs - black metal frame for stable support of your hard disks in the PC/industrial housing!- For installing 2 2.5-inch HDDs/SSDs in a 3.5-inch bay
- Stable black metal frame
- Mounting screws included in delivery
JNB 50725 - Jonsbo VC-1 GPU holder, black
23.28 EUR
The Jonsbo VC-01 graphics card holder provides flexible support for up to two extra-long graphics cards. It can be positioned freely in the enclosure and consists of a stable base with a magnetic, non-slip underside. Up to two 125-mm rods can be screwed on top of each other in the base. The rubberised holders are attached to these at any height and securely fixed in place - two pieces are included in the scope of delivery.Made from a high-quality aluminium-magnesium alloy and sandblasted black, the VC-01 boasts a low weight of just 150 grams while offering high stability. Even heavy high-end graphics cards with water cooling are reliably held in a horizontal position. The Jonsbo VC-01 reliably prevents potential long-term damage that could result from sagging or bending of large pixel bolts.
LIAN A3-1W - Lian Li DAN A3-mATX cases, vertical graphics card holder, white
61.53 EUR
Enhance your gaming setup with this white vertical GPU kit! This kit includes a riser cable and PCI slot bracket that allow you to easily install your graphics card vertically in the Lian Li DAN A3-mATX housing. Take your PC setup to a new level and stylishly present your powerful GPU to enhance the aesthetics of your setup.Note: This vertical GPU kit is only compatible with the Lian Li DAN A3-mATX housing.
KOLINK 03811 - Kolink ARGB 3-pin extension cable, 50 cm
15.01 EUR
"The extension cable is used to extend a D-RGB source and allows a visually appealing lighting system to be installed in the enclosure. It is equipped with standard 3-pin addressable RGB headers and male to female connectors.The cable can be used with all common 3-pin 5-V RGB controllers as well as with the RGB headers of leading motherboard manufacturers. To ensure that it is connected correctly, the arrow mark on the LED connector should be aligned with the +5-V mark on the D-RGB header.
Technical details:
- Length: 500 mm
- Colour: black
- Connections:
- 3-pin (+5-V, data, blocked, ground, plug/socket)
GOOBAY 94343 - Mounting frame 2.5 to 3.5
12.74 EUR
"Suitable for installing a 2.5-in hard disk in a 3.5-in housing slot- Supports any 2.5-in HDD/SSD hard drive
- Made of high-quality material and simple to install
- Use with precision
Technical data
General
Package type: bulk
Unit: 1 In plastic bag
Colour: beige
Width: 100 mm
Height: 10 mm
Depth: 100 mm
Weight: 60 g"
STARTECH.COM ST CPUMOBILESTND - PC stand, CPU stand on wheels
60.08 EUR
"- ROLLING PC STAND: This mobile computer stand provides full access to the front and back of the PC tower while providing free air circulation, anti-slip pads prevent damage to the computer case, robust steel construction
- TOOL-FREE ADJUSTMENT: The width of the CPU stands can be easily adjusted with wing nuts (bottom), tool-free adjustment from 125 to 208 mm allows the CPU holder to be adapted to different housing sizes (even UPS batteries)
- SPACE-SAVING: Use this trolley to increase work space by placing the PC tower on the floor or under a desk, the wheels on the CPU holder provide easy placement and brakes secure it in place, load capacity 21 kg
- EASY ACCESS AND INSTALLATION: Easy access to drive bays, peripherals and cables of the PC when mounted on the computer stand, fast installation with only three main components, all required parts included
GRAUGEAR GG 18045 - USB 3.1, four-port bay hub, 2x USB-A, 1x USB-C
45.61 EUR
"Front panel with 2x USB Type-C® and USB 2x Type-A ports.- USB 3.2 Gen2 hub in the front panel with 2x USB Type-C® and 2x USB Type-A
- 2x USB Type-C® with a data transfer rate of up to 10 Gbit/s
- 2x USB Type-A with a data transfer rate of up to 10 Gbit/s
- System requirement: 1x internal USB 3.2 Gen 2 Key A Host (20-pin) header
- Fits in a standard 3.5-inch (8.89-cm) installation bay
- Supports Windows®
For a quick connection...
With the GRAUGEAR G-MP02 front panel, forget all about having to crawl under the desk and behind the computer. With the 2x USB Type-C® and 2x USB Type-A ports, nothing stands in the way of quickly and conveniently connecting USB peripherals. All USB ports transfer data at a rate of up to 10 Gbit/s. The simple and elegant GRAUGEAR front panel is installed in a computer's free 3.5-inch standard bay."
STARTECH.COM ST PLATEBLANK - Expansion Slot Cover Plate - 10 Pack
19.15 EUR
"- Full Profile/Standard height design
- Metal construction
Add a cover for an exposed full profile expansion card slot
This 10-pack of expansion slot covers is great to have on hand for new system builds or computer upgrades."
JNB 51449 - Jonsbo VC-20 GPU holder, black
23.28 EUR
The Jonsbo VC-20 graphics card holder provides stable support for long graphics and expansion cards and reliably protects against sagging or damage. It can be positioned flexibly and freely in the enclosure, ensuring maximum compatibility with different motherboard and GPU layouts.The sturdy base made of high-quality material has a magnetic, non-slip underside that ensures a secure hold on metal surfaces. The height of the bracket can be adjusted continuously via a precise thread and can be individually adapted to the card to be supported.
With its sleek, modern design, the Jonsbo VC-20 blends discreetly into any system and combines functionality with style - ideal for users who value stability, durability and a clean look in their PC housing.
DELOCK 66332 - DIN rail adapter
36.93 EUR
This DIN rail adapter by Delock can be used to mount e.g. an embedded PC on a 35 mm DIN rail.Specification
• DIN rail mounting: 35 mm
• 6 mounting holes
• Mounting hole diameter: 4.5 mm
• Pitch of screw hole:
horizontally ca. 13.5 mm
vertical ca. 45 mm
• Spring mechanism
• Material: metal
• Dimensions (LxWxH): ca. 114 x 40 x 15 mm
System requirements
• 35 mm DIN rail
Package content
• DIN rail adapter
• 4 x screw M4
Package
• Poly bag
DELOCK 47200 - Mounting frame for slim drives
31.89 EUR
This Delock mounting frame can be used to install a slim drive and hard disk in a free 5.25 bay of your computer. Technical data
• For installation in 5.25 bays
• 1. Variant: 2 x 5.25 slim drives
• 2. Variant: 1 x 5.25 slim drive and 1 x 2.5 HDD or 1 x 3.5 HDD
• Metal frame with plastic front
System requirements
• One free 5.25 bay
Package contents
• 5.25 mounting frame
• Screws
Packaging
• Retail box
STARTECH.COM ST PCSCREWKIT - PC Screw Kit - Screw Nuts and Standoffs
59.36 EUR
"- ATX-style PC Case Standoffs
- Pre-Trapped PC Case Standoffs
- AT-style PC Case Standoffs
- Nuts: 4-40 x 1.6 mm, 6 mm
- Case fan screw
Install computer hardware with an assortment of screws, nuts and standoffs
StarTech.com's PC Screw Kit offers a handy assortment of common PC fasteners for building, reparing, and maintaining computer systems. The PC screw kit includes 12 different fasteners all in a plastic carrying case with divided compartments.
The PC screw kit offers 50 screws in each of 7 category types, for a total of 350 screws, as well as an assortment of standoffs."
THERMAL GRIZZLY TG-WV-90-P-H1N - WireView 90 Pro GPU 1x12VHPWR Normal
82.26 EUR
"The 90° WireView Pro GPU is a device for measuring the power consumption of graphics cards. Developed in collaboration with Jon ""elmor"" Sandström, the 90° WireView Pro GPU connects to the graphics card's 12VHPWR power connector and connects to the power supply unit via the power cable. An OLED display shows the power consumption data. The Pro version has plug detection and temperature sensors, as well as a buzzer which emits an acoustic warning signal if the adjustable limit value for temperature and current is exceeded, or if the cable is not connected correctly or a cable with the wrong specifications is connected.The 90° version of the WireView Pro GPU fulfils the function of a 90° adapter in which the connection cable from the power supply unit (when installing the GPU horizontally) is routed downwards towards the bottom of the housing. The previous versions are U-shaped adapters in which the cable from the mains plug runs over the backplate of the GPU."
"DELOCK 66867 - 19"" Mounting Bracket for network cabinet 300 x 40 mm 2 pieces"
19.2 EUR
"These mounting brackets by Delock can be mounted into a 19"" network cabinet to the side and they are ideal for placing network components without a mounting option.Specification
- For mounting in 19"" network cabinet
- Suitable for network cabinets with 300 mm depth
- For placing network components
- Material: metal
- Colour: black
- Dimensions (LxWxH): ca. 300 x 40 x 35 mm
Package content
- 2 x mounting bracket
- Mounting material
Package
- Poly bag
"DELOCK 64058 - 3.5"" Front Panel"
46.02 EUR
"This front panel by Delock can be installed into a free 3.5"" bay of a computer. It has two USB 3.2 Gen 1 Type-A and one USB 3.2 Gen 1 Type-C port. It will be connected to the motherboard internally via a pin header male port.Integrated Card Reader
In addition, the hub with integrated card reader expands the PC by an SD and a Micro SD slot.
Specification
- Connectors:
external:
1 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) USB Type-C™ female
2 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) Type-A female
1 x SD slot
1 x Micro SD slot
internal:
1 x 19 pin USB pin header female port on the cable
1 x SATA 15 pin power connector - Chipset: VIA VL817, Genesys Logic GL3224
- Data transfer rate up to:
SuperSpeed 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps - The Card Reader supports following memory cards:
1. Slot Secure Digital
SD, SD3.0 UHS-I, SD High Capacity (SDHC), SD Ultra, SDHC Ultra, SDXC, MMC-I,
MMC-II, MMC 4.0, Mini SD, Mini SDHC, MMCmobile, RS-MMC, RS-MMC 4.0
2. Slot Micro Secure Digital
MicroSD, Micro SDHC, Micro SDHC Ultra, T-Flash, MMCmicro - Cable data:
1 x 19 pin USB pin header female cable, length ca. 54 cm (without connectors) - 3.5"" metal frame
- Colour: black
- Hot Swap, Plug & Play
System requirements
- Linux Kernel 3.3 or above
- Windows 8.1/8.1-64/10/10-64
- PC with one free 3.5"" bay
- Motherboard with a free 19 pin USB pin header male
- Power supply with SATA 15 pin receptacle
Package content
- 3.5"" front panel
- USB pin header female cable
- Screws
- User manual
Package
- Retail Box
LIAN O11DE-3XV2 - Lian Li optional USB module for O11DEX, O11DERGB-X
30.52 EUR
Extra connectors for your Lian Li housing: the Lian Li I/O kit for O11 dynamic EVO RGBHave you chosen the Lian Li O11 dynamic EVO RGB and need more connectors on your housing? Then the Lian Li I/O kit gives you everything you need.
With this conversion kit, you get an additional I/O panel. There are three different placement options on the bottom of the case - without the need for tools. This modular I/O panel has two USB 3.0 ports and one USB Type-C port.
LIAN O11DMINI-1W - Lian Li mini riser card + PCI bezel, PCIe 4.0, 200 mm, white
68.76 EUR
With this conversion kit, consisting of a riser cable and a PCI slot bezel, a graphics card can be installed vertically in the Lian Li O11 Dynamic Mini Midi Tower. To do this, the slot covers on the modular back of the Lian Li O11 Dynamic Mini are removed and replaced with the slot covers supplied in the kit. The riser cable supports PCIe 4.0.
GOOBAY 95875 - Mounting frame 2x 2.5 to 3.5
14.08 EUR
"Suitable for installing up to 2x 2.5-in hard disks into a 3.5-in housing slot- Supports any 2.5-in HDD/SSD hard drive
- Made of high-quality material and easy to install
- Can be used with precision
Technical data
General
Package type: bulk
Unit: 1 In plastic bag
Colour: silver
Width: 103 mm
Height: 25 mm
Depth: 115 mm
Weight: 80 g"
LIAN O11DE-9W - Lian Li GPU bracket, white
20.18 EUR
"The Lian Li O11DE-9W GPU bracket allows you to mount your RTX 4000 series graphics card vertically into your Lian Li O11. This allows you to maintain a clean look and also improve temperatures in your housing. The GPU bracket is compatible with most NVIDIA 40 series graphics cards and is designed for use with the Lian Li O11 housing.- Dimensions: Mounting frame: 115.8 x 50 x 158.8 mm (W x H x D)
- Support frame: 70 x 10 x 81 mm (W x H x D)
- Material: steel
- Colour: white
- Included in delivery:
- 1x Lian Li O11DE-9W GPU bracket, white
- 1x fasteners
- Compatibility:
- ASUS TUF 4090/ROG STRIX 4070Ti/GIGABYTE Gaming OC 4080/GIGABYTE Windforce 4090/AORUS Master 4070Ti/MSI Suprim 4090/MSI GAMING X 4080/PALIT Gamerock 4090/NVIDIA 4090